The document describes a compact sampling valve type 616M that features a cast body with a conical piston seating hard faced with stellite for better tightness and longer lasting sealing. It has a back seat and piston tightness with an FEP encapsulated viton o-ring for low maintenance, easy cleaning, and low contamination risks. The valve allows for direct sampling in the process flow with a sampling pot that has a quick disconnector and polished internal and external surfaces.
Bottom Tank Inspection by Manual & Mapping Tank Floor Bottom Scanner
Dimensional Control Survey , Storage Tank Inspection
Above Ground Storage Tank Evaluation Program
• Our Above Ground Tank Inspection services include:
• Nondestructive testing services
• Ultrasonic thickness measurement using our DX-20 remote crawler
• MFE 2412 floor scanner
• DX-20 Magnetically- Attached Ultrasonic / Remote Visual Testing Crawler
• Our Tank Inspection Qualifications include:
• API 653 certified inspectors
Mechanical Integrity Program capabilities:
• Thickness Inspections
• Engineering Evaluations
• Corrosion Rate and Remaining Life Determination
• Fitness For Service Evaluations (FFS)
• Turnkey Tank Management Program
Our targeted tank inspections look to find and quantify such damage and deterioration phenomenon as:
• Corrosion Rate
• Remaining Life
• Under Floor Corrosion
• Corrosion Under Insulation (CUI)
• Tide Line and Corrosion Zones
• Settlement and Planar Tilt
Above Ground Storage Tanks within our inspection expertise include:
• SP-001 Tanks
• UL-58
Our inspections are tailored to your process equipment and risk mediation programs such as:
• Mechanical Integrity Program (MIP)
• Process Safety Management (PSM)
• Spill Prevention Control and Countermeasure (SPCC)
• Resource Conservation and Recovery Act (RCRA)
• Chlorine and Chlorine Dioxide Service
• Flammable or Hazardous Chemicals
• Proprietary Process Chemicals
We utilize the following tests in our inspections to gain an understanding of the condition of your equipment.
• Visual Inspections (VT)
• Ultrasonic Thickness Testing (UTT)
• Magnetic Particle Testing (MT)
• Penetrant Testing (PT)
• Radiographic Testing (RT)
• Magnetic Flux Leak Detection (MFL)
• Vacuum Box Testing (VBT)
Peripheral Considerations:
• Secondary Containment Sizing
Our API inspectors have been properly trained and certified and commmonly perform API 653 tank inspections. Many industries call upon iFluids to perform other popular services according to the API 570 and API 510 standards.
YDB VALVES LLP offers high-quality Double block & bleed valve. We design and manufacture new concept instrumentation Valves, which are strictly produced according to the most stringent quality standards of safety and efficiency.
Gel Strength Exp. Drilling Engineering, Mud Lab, Exp.Jarjis Mohammed
Gel Strength by jarjis
Experiment Number 6: Gel Strength.
Koya University.
Faculty of Engineering.
Drilling Lab
Supervised By Muhammad Jamal
=============
This a report about Gel Strength. written by Jarjis Muhammad, Petroleum Engineering Dep. Koya University. For more Information please contact me: www.facebook.com/Jarjis.shaqlawaee
Analyzing Multi-zone completion using multilayer by IPR (PROSPER) Arez Luqman
The primary objective of any well drilled and completed is to produce Hydrocarbons; by loading the Hydrocarbon (i.e. Oil and Gas) contained within the well through a conduit of the well and start separating it with surface facilities depending on type and composition of the Hydrocarbon.
Producing oil is simultaneously contained with problems depending on the type and properties of the reservoir.
Furthermore, what makes the problems much more; is when oil and/or gas is produced from multi-zones at the same time, when accumulated problems from all the producer zones occurring at the same time.
To help analyze this problems we are going to use PROSPER software package IPR multilayer, in which helps in identifying the relationship between Flow rate and Reservoir pressure.
Tank bottom valve disc lowering-custom made valve-607m-Guichon ValvesGUICHON VALVES
For any liquid, powder or gas. Optional bellows if dangerous product.
For vessel/reactor equipped with agitator, no retention areas
DN 20 to 350
3/4" à 14"
PN 10 to PN 150
150 to 900 lbs
To analyse the evolution of the product ; suitable for liquids, liquids mixed with solids or powders.
Good “crust breaking” function while maintaining tightness, for all non abrasive fluids
DN15
1/2"
PN10 to PN100
150 to 600 lbs
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Bottom Tank Inspection by Manual & Mapping Tank Floor Bottom Scanner
Dimensional Control Survey , Storage Tank Inspection
Above Ground Storage Tank Evaluation Program
• Our Above Ground Tank Inspection services include:
• Nondestructive testing services
• Ultrasonic thickness measurement using our DX-20 remote crawler
• MFE 2412 floor scanner
• DX-20 Magnetically- Attached Ultrasonic / Remote Visual Testing Crawler
• Our Tank Inspection Qualifications include:
• API 653 certified inspectors
Mechanical Integrity Program capabilities:
• Thickness Inspections
• Engineering Evaluations
• Corrosion Rate and Remaining Life Determination
• Fitness For Service Evaluations (FFS)
• Turnkey Tank Management Program
Our targeted tank inspections look to find and quantify such damage and deterioration phenomenon as:
• Corrosion Rate
• Remaining Life
• Under Floor Corrosion
• Corrosion Under Insulation (CUI)
• Tide Line and Corrosion Zones
• Settlement and Planar Tilt
Above Ground Storage Tanks within our inspection expertise include:
• SP-001 Tanks
• UL-58
Our inspections are tailored to your process equipment and risk mediation programs such as:
• Mechanical Integrity Program (MIP)
• Process Safety Management (PSM)
• Spill Prevention Control and Countermeasure (SPCC)
• Resource Conservation and Recovery Act (RCRA)
• Chlorine and Chlorine Dioxide Service
• Flammable or Hazardous Chemicals
• Proprietary Process Chemicals
We utilize the following tests in our inspections to gain an understanding of the condition of your equipment.
• Visual Inspections (VT)
• Ultrasonic Thickness Testing (UTT)
• Magnetic Particle Testing (MT)
• Penetrant Testing (PT)
• Radiographic Testing (RT)
• Magnetic Flux Leak Detection (MFL)
• Vacuum Box Testing (VBT)
Peripheral Considerations:
• Secondary Containment Sizing
Our API inspectors have been properly trained and certified and commmonly perform API 653 tank inspections. Many industries call upon iFluids to perform other popular services according to the API 570 and API 510 standards.
YDB VALVES LLP offers high-quality Double block & bleed valve. We design and manufacture new concept instrumentation Valves, which are strictly produced according to the most stringent quality standards of safety and efficiency.
Gel Strength Exp. Drilling Engineering, Mud Lab, Exp.Jarjis Mohammed
Gel Strength by jarjis
Experiment Number 6: Gel Strength.
Koya University.
Faculty of Engineering.
Drilling Lab
Supervised By Muhammad Jamal
=============
This a report about Gel Strength. written by Jarjis Muhammad, Petroleum Engineering Dep. Koya University. For more Information please contact me: www.facebook.com/Jarjis.shaqlawaee
Analyzing Multi-zone completion using multilayer by IPR (PROSPER) Arez Luqman
The primary objective of any well drilled and completed is to produce Hydrocarbons; by loading the Hydrocarbon (i.e. Oil and Gas) contained within the well through a conduit of the well and start separating it with surface facilities depending on type and composition of the Hydrocarbon.
Producing oil is simultaneously contained with problems depending on the type and properties of the reservoir.
Furthermore, what makes the problems much more; is when oil and/or gas is produced from multi-zones at the same time, when accumulated problems from all the producer zones occurring at the same time.
To help analyze this problems we are going to use PROSPER software package IPR multilayer, in which helps in identifying the relationship between Flow rate and Reservoir pressure.
Tank bottom valve disc lowering-custom made valve-607m-Guichon ValvesGUICHON VALVES
For any liquid, powder or gas. Optional bellows if dangerous product.
For vessel/reactor equipped with agitator, no retention areas
DN 20 to 350
3/4" à 14"
PN 10 to PN 150
150 to 900 lbs
To analyse the evolution of the product ; suitable for liquids, liquids mixed with solids or powders.
Good “crust breaking” function while maintaining tightness, for all non abrasive fluids
DN15
1/2"
PN10 to PN100
150 to 600 lbs
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Piston valve metal to metal sealing-engineered valve-606m-Guichon valvesGUICHON VALVES
Dead space free, well suited for viscous and polymerizing fluids
Metal/metal seating, generally for abrasive fluids
DN 10 to DN 200
3/8" à 8"
PN 10 to PN 420
150 to 2500 lbs
WOM Group Manufacturers Floating Ball Valve with advanced technology. WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks.
WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks. WOM’s Floating Ball Valves have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM Group provides Floating Ball Valves with an exceedingly reliable and proven design offering maximum sealing against leaks. They have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
Dead space free, well suited for viscous and polymerizing fluids
For non abrasive fluids, generally for “crust-breaking” function
DN 12 to DN 200
1/2" to 8"
PN 10 to PN 100
acc. to DN
150 to 600 Lbs acc. to DN
Sampling valve capacitive ball-custom made valve-310n-Guichon valvesGUICHON VALVES
To analyse the evolution of the product ; suitable for liquids, liquids mixed with solids or powders.
A precise quantity of product can be taken out, compact design, safe and quick sample removal
DN 15 to DN 200
1/2" à 8"
PN 10 to PN 50
150 to 300 lbs
Automated protection
To protect the installation against damages caused by line overpressure.
Compact design, low pressure loss.
DN 15 to DN 100
1/2" à 4"
PN 10 to PN 100
acc. to DN
150 to 600 lbs acc. to DN
Robinet piston etancheite metal metal-Guichon valvesGUICHON VALVES
Sans zone morte particulièrement adaptés aux fluides visqueux et polymérisants.
Étanchéité métal/métal, souvent pour fluide abrasif.
DN 10 à DN 200
3/8" à 8"
PN 10 à PN 420
150 à 2500 lbs
Robinet fond de cuve soupape siege incline-Guichon valvesGUICHON VALVES
Pour tout liquide, poudre ou gaz. Bien adaptés à la haute pression. Soufflet en option si produit dangereux.
Minimisent les pertes de charge.
DN 8 à DN 400
1/4" à 16"
PN 10 à PN 420
150 à 2500 lbs
Robinet fond de cuve soupape ouverture interieure-Guichon valvesGUICHON VALVES
Pour tout liquide, poudre ou gaz. Soufflet en option si produit dangereux.
Pour cuve/réacteur muni d’agitateur, pas de zone de rétention.
DN 20 à 350
3/4" à 14"
PN 10 à PN 150
150 à 900 lbs
Robinet fond de cuve soupape casse croute-Guichon valvesGUICHON VALVES
Pour tout liquide, poudre ou gaz. Soufflet en option si produit dangereux.
Ouverture dans la cuve pour fonction « casse-croûte », pas de zone de rétention, Option « sécurité cuve » pour empêcher l’écoulement du produit en cas d’arrachement du corps de vanne.
DN 20 à 400
3/4" à 16"
PN 10 à PN 150
150 à 900 lbs
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
1. GSamplingValve
Compactdesign
type616M
Sampling Valve
Compact design / type 616M
application: liquids liquids with solid particles
VALVES
General
Chemicals Plastics
and
Polymers
Petro-
chemicals
Other
Application
Nuclear
and Navy
Cryogenic
Service
Fine
Chemicals
Features
• DN 50 - PN 10
• Cast body
• Conical piston seating hard faced with stellite
• Back seat and piston tightness with FEP encapsulated viton O’ring
• Direct sampling in the process flow
• Sampling pot with quick disconnector
• Outlet angle : 60°
• Polished flush closing piston
• Pad mounting
• Turning non rising stem
• Polished internal (Ra 0,4 µm) and
external (Ra 1,6 to 2 µm) surfaces
• PED 97/23/EC compliant
• Weight: 13.6 kg
Pistonvalve
Slidevalve
Ball&plug
valve
Butterfly
valve
Tankbottom
valveControlGlobevalve
Safety
Relief
Rinsing
InjectionMultiwayAccessoriesCheckvalveActuatorGatevalve
Sampling
valve
Competitive
advantages
• Very compact
ª easy to fit, even in confined environment
• Conical stellite-to-metal piston seating
ª better tightness
ª longer lasting sealing
• Back seat with O'ring
ª low maintenance and easy cleaning
ª low contamination risks
ª low operating torque
• Flush closing piston
ª no retention area
• Direct sampling in the process medium
ª genuine sample
• Wetted surfaces polished
ª No retention of product
• Tublar yoke instead of column
ª Low contamination risks
2. VALVES
26 rue Paul Girod – Z.I. Bissy • 73000 Chambéry • France
Tél : + 33 (0)4 79 44 59 00 • Fax : + 33 (0)4 79 44 59 01
E-mail : info@guichon.com • www.guichon.com
Partslist&Dimensions
SamplingValve
Compactdesign/type616M
RPE-616M-GB/05.10
Nonbindingdata
Part n° MaterialPart name
Body
Piston
Stem
Yoke
Pin
Indicator
Bearing
Thrust ring
Lever
Piston o'ring
Piston nose o'ring
Washer
Gland spacer
Sampling pot
Sampling pot gasket
Degazing valve
1
16
43
90
96
97
107
111
119
171
215
218
292
394
396
467
A351 CF3M
316 L / Stellite
Bronze
304 L
Stainless Steel
Stainless Steel
304 L
PTFE
304 L
Viton / FEP
Viton / FEP
Stainless Steel
PTFE
Stainless Steel + Pyrex glass
Viton
316 L
OPTIONS
• Adaptation of customer’s
sampling pot
• Sampling pot cover
• EN10204 3.1 certificates ;
ATEX
Type 616N Sampling valve
Hight performance
Suitable for vacuum applications
Welded construction
Quick body dismantling
Nitrogen injection
nozzle on request
Alternative:
Design may change according to options