Sailing yacht’s hull design upright
•
1 like•680 views
There are three major components that make up the resistance forces on a sailing yacht: 1) Viscous resistance, which includes friction resistance between the hull and water and viscous pressure resistance based on the hull shape; 2) Wave resistance, which is generated as the yacht displaces and deflects water, forming waves that take energy from the yacht's movement; 3) Additional resistance, including aerodynamic resistance of the sails and hydrodynamic resistance of components like the rudder and centerboard.
Report
Share
Report
Share
![Index: ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Cu06997 lecture 11_hydraulic_structures
This document discusses various types of hydraulic structures used to regulate water flow, including weirs and culverts. It provides information on thin plate weirs and formulas used to calculate discharge for different weir types under conditions of free flow and submerged flow. Long based weirs are also covered, explaining how they can experience either free flow or submerged flow depending on the downstream water level. The document concludes with an explanation of how a partially filled culvert can act as a broad crested weir.
Slammimng & Dek Wetness
The document discusses slamming and deck wetness on vessels in rough seas. It provides three types of slamming that can occur: bottom, bow flare, and stern slamming. Slamming causes impulse loads and high pressure on the hull during impact with waves. The bottom between 10-25% of the length from the bow is most vulnerable. Deck wetness from shipping green water is determined by two methods: static and dynamic swell-up. Static swell-up reduces freeboard from bow wave and sinkage, while dynamic swell-up occurs from water pushed aside and sucked in by the bow's motion. Deck wetness can be reduced by increasing freeboard, reducing speed, or changing heading relative to waves.
Wave resistance
This document discusses wave resistance in ships. It explains that wave resistance increases significantly at high speeds as waves generated by the ship grow larger. It also describes how the interference of bow and stern waves can cause fluctuations in total resistance depending on whether wave crests and troughs constructively or destructively interfere. The document provides details on calculating speeds where favorable and unfavorable interference occurs. It also discusses additional sources of resistance like appendages, air resistance, and wave breaking.
Water hammer in pipe_AMIT
This document discusses water hammer in pipes. It explains that when a valve regulating water flow in a pipe is suddenly closed, the momentum of the flowing water is destroyed, creating a high pressure wave. This pressure wave travels along the pipe at the speed of sound and can cause knocking noises. The pressure rise from water hammer depends on factors like flow velocity, pipe length, valve closure time, and pipe material elasticity. The document then considers cases of gradual versus sudden valve closure in a rigid pipe and defines variables like pipe area, length, flow velocity, pressure wave intensity, and water bulk modulus used to analyze water hammer effects.
Lecture14c
This document discusses fluid dynamics and the equation of continuity. It introduces laminar and turbulent fluid flow. The equation of continuity states that for incompressible steady flow through a pipe of varying cross-sectional area, the product of fluid speed and cross-sectional area at any point along the pipe is constant. This follows from the principle of conservation of mass. Applications of the equation of continuity include relating fluid speed and area for blood flow through capillaries and estimating the cross-sectional area of a heating duct.
Efecto venturi
The Venturi effect describes how the velocity of a fluid increases and pressure decreases as it passes through a constricted section of pipe. According to fluid dynamics laws, velocity must increase through a constriction while pressure decreases to maintain continuity and conserve energy. This effect can be measured using a Venturi tube, which is a length of pipe with varying diameters and entry and exit cones designed to minimize drag.
Ship resistance in confined water
This document discusses the effects of shallow and restricted water on ships, including increased sinkage, trim, and resistance. It describes how squat, the combined sinkage and trim effect, increases sharply with ship speed. Empirical formulas are provided to estimate squat in canals and unrestricted shallow water. The changes to wave patterns and resistance at various ship speeds relative to the critical wave speed are also summarized.
Cu06997 the basics_26052013
This course covers 13 fluid dynamics calculations including:
1) Flow types in pipes and open channels (steady/unsteady, uniform/non-uniform)
2) Discharge calculations for culverts, weirs, and open channels
3) Determining dimensions and flow rates in pipes and channels
4) Calculating forces on structures from water such as pressure, buoyancy, and hydraulic gradients
Recommended
Cu06997 lecture 11_hydraulic_structures
This document discusses various types of hydraulic structures used to regulate water flow, including weirs and culverts. It provides information on thin plate weirs and formulas used to calculate discharge for different weir types under conditions of free flow and submerged flow. Long based weirs are also covered, explaining how they can experience either free flow or submerged flow depending on the downstream water level. The document concludes with an explanation of how a partially filled culvert can act as a broad crested weir.
Slammimng & Dek Wetness
The document discusses slamming and deck wetness on vessels in rough seas. It provides three types of slamming that can occur: bottom, bow flare, and stern slamming. Slamming causes impulse loads and high pressure on the hull during impact with waves. The bottom between 10-25% of the length from the bow is most vulnerable. Deck wetness from shipping green water is determined by two methods: static and dynamic swell-up. Static swell-up reduces freeboard from bow wave and sinkage, while dynamic swell-up occurs from water pushed aside and sucked in by the bow's motion. Deck wetness can be reduced by increasing freeboard, reducing speed, or changing heading relative to waves.
Wave resistance
This document discusses wave resistance in ships. It explains that wave resistance increases significantly at high speeds as waves generated by the ship grow larger. It also describes how the interference of bow and stern waves can cause fluctuations in total resistance depending on whether wave crests and troughs constructively or destructively interfere. The document provides details on calculating speeds where favorable and unfavorable interference occurs. It also discusses additional sources of resistance like appendages, air resistance, and wave breaking.
Water hammer in pipe_AMIT
This document discusses water hammer in pipes. It explains that when a valve regulating water flow in a pipe is suddenly closed, the momentum of the flowing water is destroyed, creating a high pressure wave. This pressure wave travels along the pipe at the speed of sound and can cause knocking noises. The pressure rise from water hammer depends on factors like flow velocity, pipe length, valve closure time, and pipe material elasticity. The document then considers cases of gradual versus sudden valve closure in a rigid pipe and defines variables like pipe area, length, flow velocity, pressure wave intensity, and water bulk modulus used to analyze water hammer effects.
Lecture14c
This document discusses fluid dynamics and the equation of continuity. It introduces laminar and turbulent fluid flow. The equation of continuity states that for incompressible steady flow through a pipe of varying cross-sectional area, the product of fluid speed and cross-sectional area at any point along the pipe is constant. This follows from the principle of conservation of mass. Applications of the equation of continuity include relating fluid speed and area for blood flow through capillaries and estimating the cross-sectional area of a heating duct.
Efecto venturi
The Venturi effect describes how the velocity of a fluid increases and pressure decreases as it passes through a constricted section of pipe. According to fluid dynamics laws, velocity must increase through a constriction while pressure decreases to maintain continuity and conserve energy. This effect can be measured using a Venturi tube, which is a length of pipe with varying diameters and entry and exit cones designed to minimize drag.
Ship resistance in confined water
This document discusses the effects of shallow and restricted water on ships, including increased sinkage, trim, and resistance. It describes how squat, the combined sinkage and trim effect, increases sharply with ship speed. Empirical formulas are provided to estimate squat in canals and unrestricted shallow water. The changes to wave patterns and resistance at various ship speeds relative to the critical wave speed are also summarized.
Cu06997 the basics_26052013
This course covers 13 fluid dynamics calculations including:
1) Flow types in pipes and open channels (steady/unsteady, uniform/non-uniform)
2) Discharge calculations for culverts, weirs, and open channels
3) Determining dimensions and flow rates in pipes and channels
4) Calculating forces on structures from water such as pressure, buoyancy, and hydraulic gradients
Ppt unit 2
This document provides an overview of fluid kinematics concepts including:
1. The types of fluid flow are defined such as real vs ideal, laminar vs turbulent, steady vs unsteady, uniform vs non-uniform, and one, two, and three dimensional flows.
2. Fluid kinematics variables like velocity, acceleration, and pressure fields are introduced. Streamlines, streamtubes, vorticity, and circulation are also defined.
3. The conservation of mass principle (continuity equation) is presented for one, two, and three dimensional steady and unsteady compressible/incompressible flows.
Team Building : Sailing regatta briefing
This is a sample briefing of a Sailing Regatta organised as a team building activity for a corporate group.
Fm ppt unit 4
This document is a lecture on fluid mechanics covering topics such as laminar flow through pipes, Stoke's law, the transition from laminar to turbulent flow, types of turbulent flow including wall turbulent shear flow and isotropic turbulence, the eddy viscosity hypothesis, turbulent flow in smooth and rough pipes, minor losses in pipes, pipes arranged in series and parallel, siphons, and water hammer. It was authored by Mr. Md Ateeque Khan, an assistant professor in the Department of Mechanical Engineering at Jahangirabad Institute of Technology, Barabanki for the subject of fluid mechanics.
Fluid flow phenomena
This presentation discusses fluid flow phenomena including potential flow, boundary layers, Newtonian and non-Newtonian fluids, Reynolds stresses, eddy viscosity, laminar and turbulent flow in boundary layers, boundary layer formation in straight tubes, and transition length. Potential flow is incompressible fluid flow with no shear or eddies. The boundary layer is the layer of fluid immediately adjacent to a solid boundary where shear stresses are confined. Newtonian fluids have shear stress proportional to shear rate, while non-Newtonian fluids do not have this linear relationship. Turbulent flow produces higher Reynolds stresses than laminar flow. Boundary layers begin forming at the entrance to a tube and thicken until fully developing across the tube diameter. Transition length is
Water hammer in pumped sewer mains
This publication is intended for engineers seeking an introduction to the problem of water hammer in pumped pressure mains. This is a subject of increasing interest because of the development of larger and more integrated sewer systems. Consideration of water hammer is essential for structural design of pipelines.
notch and its types
Notches are devices used to measure the flow rate of liquids through channels. Notches are classified based on their shape as rectangular, triangular, or trapezoidal. Rectangular notches offer more pressure drop than other shapes. Flow through rectangular and trapezoidal notches depends on the upstream depth, while flow through triangular notches depends on the notch angle. Triangular notches are useful for measuring low flow rates. Trapezoidal notches have discharge equal to the sum of a rectangular and two triangular notches. Weirs are larger structures used to store and measure large river and canal flows, while notches are smaller devices that measure small stream or canal flows.
Power is transmitted through pipe_AMIT
Power can be transmitted through pipes by water or other liquids flowing through them. The power transmitted depends on the weight of the liquid and total head available at the end of the pipe. To calculate the power available and conditions for maximum transmission, variables like pipe length, diameter, total head at inlet, flow velocity, head loss due to friction, and friction coefficient must be considered.
Ventury Effect; Scientific Explanation of Laws and Dynamics
Ventury effect is present in most important systems within the maritime industry which includes dredgers, pumps and waste disposal. But how does it work and what dynamics and laws govern its operation.
Fluid flow phenomenon, prepared by Makhdoom ibad ullah hashmi
This document summarizes key concepts related to fluid flow phenomena, including:
1) It defines fluids and describes their behavior under applied forces, discussing concepts like potential flow and boundary layers.
2) It outlines different fluid flow regimes for compressible and incompressible fluids, as well as rheological properties of Newtonian and non-Newtonian fluids.
3) It discusses velocity fields, boundary layer formation and properties, and provides an example of a one-dimensional fluid flow through a circular pipe where the velocity depends only on the radial distance from the centerline.
Hydraulics6
This document discusses unsteady flow in hydraulics engineering. It describes two types of unsteady flow: 1) where the water level in a reservoir is rising or falling slowly, causing discharge to vary continuously, and 2) where velocity in a pipeline changes rapidly due to valve opening/closing. It also discusses water hammer phenomenon where rapid changes in flow velocity cause pressure changes, and describes how pressure waves propagate through pipe systems when a valve closes suddenly. The document presents a graphical representation of the sequence of events and pressure changes that occur due to water hammer.
Fm ppt unit 5
This document discusses fluid mechanics and heat transfer concepts related to forced convection. It covers boundary layer development over flat plates, including definitions of boundary layer thickness and wall shear stress. It discusses the governing equations for laminar boundary layer flow and provides the exact solution known as the Blasius solution. It also discusses heat transfer coefficients, turbulent boundary layers, and forced convection over external bodies like cylinders. For internal flows like pipe flow, it covers thermal entrance regions and definitions of mean temperature used in the energy balance.
Boundary layer theory
This document discusses boundary layer development. It begins by defining boundary layers and describing the velocity profile near a surface. As distance from the leading edge increases, the boundary layer thickness grows due to viscous forces slowing fluid particles. The boundary layer then transitions from laminar to turbulent. Turbulent boundary layers have a logarithmic velocity profile and thicker boundary layer compared to laminar. Pressure gradients and surface roughness also impact boundary layer development and transition.
Lecture 6
The document discusses concepts related to fluid mechanics including:
1) Two examples of centrifugal pump problems calculating speed, vane angle, and work done per KN of water given pump specifications like diameters and flow velocities.
2) Two problems calculating work done per KN of water for centrifugal pumps operating at given speeds and with given diameters and flow velocities.
3) Discussions of concepts like Newton's law of resistance, lift and drag forces on objects in fluid flow, Reynolds number, boundary layers, and boundary layer thickness.
Assessing Pipeline Liquid Hammer Predictions
This document discusses liquid hammer predictions in oil/water pipelines. It explains that for shorter pipelines, the total overpressure is approximated by Joukowsky's equation, but for longer pipelines over 10 km, the total overpressure equals Joukowsky's overpressure plus an additional overpressure caused by line packing. Line packing refers to the continued pressurization of the pipeline from the forward fluid velocity after the first water hammer wave, raising pressures above Joukowsky's prediction. The document emphasizes that transient simulations are needed to properly account for line packing overpressure in long pipelines.
FM-II Lec 4
The document discusses turbulent flow in pipes. It defines turbulent flow and laminar flow, and explains that the shear stress in turbulent flow is defined using eddy viscosity, which depends on the turbulence of the flow. The total shear stress in turbulent flow is the sum of the laminar shear stress and turbulent shear stress. It also discusses the viscous sublayer that exists near the wall in turbulent flow, where viscosity effects are dominant over turbulent effects. The velocity profile in fully developed turbulent pipe flow can be described by the Prandtl universal velocity distribution equation.
Flow patterns and types of flow
This document summarizes different types of fluid flow patterns and flow characteristics. It defines streamlines, streaklines, pathlines, and timelines as ways to visualize fluid flow. It then describes various types of flow, including steady/unsteady, uniform/non-uniform, laminar/turbulent, compressible/incompressible, one-dimensional/two-dimensional/three-dimensional, rotational/irrotational flows. The document was presented by a group of civil engineering students on fluid mechanics.
Etht grp 11(140080125009,10,11,12)
This document discusses convection heat transfer. It begins by defining convection and Newton's Law of Cooling. It then describes the two types of convection: forced convection, which is driven by external forces, and natural (or free) convection, which is driven by buoyancy forces. It also discusses boundary layers, turbulent versus laminar flow, the Reynolds, Nusselt, and Prandtl numbers, and their relationships to convection. Specific examples covered include temperature profiles in pipes, flow over flat plates and cylinders, and forced convection in laminar and turbulent pipe flow.
Boundary layer
Boundary layer theory, Boundary layer separation and different methods to control boundary layer separation.
Heat Transfer_Forced Convection
This document discusses heat transfer via forced convection. It begins by outlining key topics like boundary layer thickness, skin surface coefficient, and dimensional relationships involving Reynolds and Prandtl numbers. It then discusses specific heat transfer processes like boiling and condensation. The majority of the document focuses on deriving the Blasius exact solution for laminar boundary layer flows over a flat plate through defining stream functions and solving the boundary layer equations and continuity equation to obtain the velocity profile. Key parameters like boundary layer thickness and skin friction coefficient are also defined and related to the dimensionless velocity profile.
Media audience research
This document asks questions about a person's media consumption habits, including what magazines they read, what they expect from magazines, how much they spend on magazines, their favorite genres, how they access music, and where they purchase magazines.
Cremação - Opinião Espírita
Cremação - Opinião EspíritaSergio Luiz , Palestrante Espírita - Professor, Cientista Social e Jornalista
O documento discute a cremação no Espiritismo e as razões pelas quais os Espíritas costumam esperar 72 horas após a morte antes de cremar o corpo. Isso é baseado na ideia de que o espírito permanece ligado ao corpo por fluidos por até 72 horas, e a cremação imediata pode causar trauma.TBizyuk Nextgen@ICANN54 PPT
This document discusses inconsistencies with the multi-stakeholder model of Internet governance used by the Internet Corporation for Assigned Names and Numbers (ICANN) and problems with its accountability mechanisms. Specifically, it notes that the model has ambiguous and ill-defined forms, distorted roles between stakeholders, and a "democracy deficit" with a lack of representative diversity and transparency. It proposes solutions like an independent body to ensure ICANN follows its own rules and increasing participation from users and civil society.
More Related Content
What's hot
Ppt unit 2
This document provides an overview of fluid kinematics concepts including:
1. The types of fluid flow are defined such as real vs ideal, laminar vs turbulent, steady vs unsteady, uniform vs non-uniform, and one, two, and three dimensional flows.
2. Fluid kinematics variables like velocity, acceleration, and pressure fields are introduced. Streamlines, streamtubes, vorticity, and circulation are also defined.
3. The conservation of mass principle (continuity equation) is presented for one, two, and three dimensional steady and unsteady compressible/incompressible flows.
Team Building : Sailing regatta briefing
This is a sample briefing of a Sailing Regatta organised as a team building activity for a corporate group.
Fm ppt unit 4
This document is a lecture on fluid mechanics covering topics such as laminar flow through pipes, Stoke's law, the transition from laminar to turbulent flow, types of turbulent flow including wall turbulent shear flow and isotropic turbulence, the eddy viscosity hypothesis, turbulent flow in smooth and rough pipes, minor losses in pipes, pipes arranged in series and parallel, siphons, and water hammer. It was authored by Mr. Md Ateeque Khan, an assistant professor in the Department of Mechanical Engineering at Jahangirabad Institute of Technology, Barabanki for the subject of fluid mechanics.
Fluid flow phenomena
This presentation discusses fluid flow phenomena including potential flow, boundary layers, Newtonian and non-Newtonian fluids, Reynolds stresses, eddy viscosity, laminar and turbulent flow in boundary layers, boundary layer formation in straight tubes, and transition length. Potential flow is incompressible fluid flow with no shear or eddies. The boundary layer is the layer of fluid immediately adjacent to a solid boundary where shear stresses are confined. Newtonian fluids have shear stress proportional to shear rate, while non-Newtonian fluids do not have this linear relationship. Turbulent flow produces higher Reynolds stresses than laminar flow. Boundary layers begin forming at the entrance to a tube and thicken until fully developing across the tube diameter. Transition length is
Water hammer in pumped sewer mains
This publication is intended for engineers seeking an introduction to the problem of water hammer in pumped pressure mains. This is a subject of increasing interest because of the development of larger and more integrated sewer systems. Consideration of water hammer is essential for structural design of pipelines.
notch and its types
Notches are devices used to measure the flow rate of liquids through channels. Notches are classified based on their shape as rectangular, triangular, or trapezoidal. Rectangular notches offer more pressure drop than other shapes. Flow through rectangular and trapezoidal notches depends on the upstream depth, while flow through triangular notches depends on the notch angle. Triangular notches are useful for measuring low flow rates. Trapezoidal notches have discharge equal to the sum of a rectangular and two triangular notches. Weirs are larger structures used to store and measure large river and canal flows, while notches are smaller devices that measure small stream or canal flows.
Power is transmitted through pipe_AMIT
Power can be transmitted through pipes by water or other liquids flowing through them. The power transmitted depends on the weight of the liquid and total head available at the end of the pipe. To calculate the power available and conditions for maximum transmission, variables like pipe length, diameter, total head at inlet, flow velocity, head loss due to friction, and friction coefficient must be considered.
Ventury Effect; Scientific Explanation of Laws and Dynamics
Ventury effect is present in most important systems within the maritime industry which includes dredgers, pumps and waste disposal. But how does it work and what dynamics and laws govern its operation.
Fluid flow phenomenon, prepared by Makhdoom ibad ullah hashmi
This document summarizes key concepts related to fluid flow phenomena, including:
1) It defines fluids and describes their behavior under applied forces, discussing concepts like potential flow and boundary layers.
2) It outlines different fluid flow regimes for compressible and incompressible fluids, as well as rheological properties of Newtonian and non-Newtonian fluids.
3) It discusses velocity fields, boundary layer formation and properties, and provides an example of a one-dimensional fluid flow through a circular pipe where the velocity depends only on the radial distance from the centerline.
Hydraulics6
This document discusses unsteady flow in hydraulics engineering. It describes two types of unsteady flow: 1) where the water level in a reservoir is rising or falling slowly, causing discharge to vary continuously, and 2) where velocity in a pipeline changes rapidly due to valve opening/closing. It also discusses water hammer phenomenon where rapid changes in flow velocity cause pressure changes, and describes how pressure waves propagate through pipe systems when a valve closes suddenly. The document presents a graphical representation of the sequence of events and pressure changes that occur due to water hammer.
Fm ppt unit 5
This document discusses fluid mechanics and heat transfer concepts related to forced convection. It covers boundary layer development over flat plates, including definitions of boundary layer thickness and wall shear stress. It discusses the governing equations for laminar boundary layer flow and provides the exact solution known as the Blasius solution. It also discusses heat transfer coefficients, turbulent boundary layers, and forced convection over external bodies like cylinders. For internal flows like pipe flow, it covers thermal entrance regions and definitions of mean temperature used in the energy balance.
Boundary layer theory
This document discusses boundary layer development. It begins by defining boundary layers and describing the velocity profile near a surface. As distance from the leading edge increases, the boundary layer thickness grows due to viscous forces slowing fluid particles. The boundary layer then transitions from laminar to turbulent. Turbulent boundary layers have a logarithmic velocity profile and thicker boundary layer compared to laminar. Pressure gradients and surface roughness also impact boundary layer development and transition.
Lecture 6
The document discusses concepts related to fluid mechanics including:
1) Two examples of centrifugal pump problems calculating speed, vane angle, and work done per KN of water given pump specifications like diameters and flow velocities.
2) Two problems calculating work done per KN of water for centrifugal pumps operating at given speeds and with given diameters and flow velocities.
3) Discussions of concepts like Newton's law of resistance, lift and drag forces on objects in fluid flow, Reynolds number, boundary layers, and boundary layer thickness.
Assessing Pipeline Liquid Hammer Predictions
This document discusses liquid hammer predictions in oil/water pipelines. It explains that for shorter pipelines, the total overpressure is approximated by Joukowsky's equation, but for longer pipelines over 10 km, the total overpressure equals Joukowsky's overpressure plus an additional overpressure caused by line packing. Line packing refers to the continued pressurization of the pipeline from the forward fluid velocity after the first water hammer wave, raising pressures above Joukowsky's prediction. The document emphasizes that transient simulations are needed to properly account for line packing overpressure in long pipelines.
FM-II Lec 4
The document discusses turbulent flow in pipes. It defines turbulent flow and laminar flow, and explains that the shear stress in turbulent flow is defined using eddy viscosity, which depends on the turbulence of the flow. The total shear stress in turbulent flow is the sum of the laminar shear stress and turbulent shear stress. It also discusses the viscous sublayer that exists near the wall in turbulent flow, where viscosity effects are dominant over turbulent effects. The velocity profile in fully developed turbulent pipe flow can be described by the Prandtl universal velocity distribution equation.
Flow patterns and types of flow
This document summarizes different types of fluid flow patterns and flow characteristics. It defines streamlines, streaklines, pathlines, and timelines as ways to visualize fluid flow. It then describes various types of flow, including steady/unsteady, uniform/non-uniform, laminar/turbulent, compressible/incompressible, one-dimensional/two-dimensional/three-dimensional, rotational/irrotational flows. The document was presented by a group of civil engineering students on fluid mechanics.
Etht grp 11(140080125009,10,11,12)
This document discusses convection heat transfer. It begins by defining convection and Newton's Law of Cooling. It then describes the two types of convection: forced convection, which is driven by external forces, and natural (or free) convection, which is driven by buoyancy forces. It also discusses boundary layers, turbulent versus laminar flow, the Reynolds, Nusselt, and Prandtl numbers, and their relationships to convection. Specific examples covered include temperature profiles in pipes, flow over flat plates and cylinders, and forced convection in laminar and turbulent pipe flow.
Boundary layer
Boundary layer theory, Boundary layer separation and different methods to control boundary layer separation.
Heat Transfer_Forced Convection
This document discusses heat transfer via forced convection. It begins by outlining key topics like boundary layer thickness, skin surface coefficient, and dimensional relationships involving Reynolds and Prandtl numbers. It then discusses specific heat transfer processes like boiling and condensation. The majority of the document focuses on deriving the Blasius exact solution for laminar boundary layer flows over a flat plate through defining stream functions and solving the boundary layer equations and continuity equation to obtain the velocity profile. Key parameters like boundary layer thickness and skin friction coefficient are also defined and related to the dimensionless velocity profile.
What's hot (19)
Ventury Effect; Scientific Explanation of Laws and Dynamics
Ventury Effect; Scientific Explanation of Laws and Dynamics
Fluid flow phenomenon, prepared by Makhdoom ibad ullah hashmi
Fluid flow phenomenon, prepared by Makhdoom ibad ullah hashmi
Viewers also liked
Media audience research
This document asks questions about a person's media consumption habits, including what magazines they read, what they expect from magazines, how much they spend on magazines, their favorite genres, how they access music, and where they purchase magazines.
Cremação - Opinião Espírita
Cremação - Opinião EspíritaSergio Luiz , Palestrante Espírita - Professor, Cientista Social e Jornalista
O documento discute a cremação no Espiritismo e as razões pelas quais os Espíritas costumam esperar 72 horas após a morte antes de cremar o corpo. Isso é baseado na ideia de que o espírito permanece ligado ao corpo por fluidos por até 72 horas, e a cremação imediata pode causar trauma.TBizyuk Nextgen@ICANN54 PPT
This document discusses inconsistencies with the multi-stakeholder model of Internet governance used by the Internet Corporation for Assigned Names and Numbers (ICANN) and problems with its accountability mechanisms. Specifically, it notes that the model has ambiguous and ill-defined forms, distorted roles between stakeholders, and a "democracy deficit" with a lack of representative diversity and transparency. It proposes solutions like an independent body to ensure ICANN follows its own rules and increasing participation from users and civil society.
Southern americans
The document discusses the history and culture of the Southern United States. It notes that as of 2010, approximately 114.5 million people, or 37% of the total US population, lived in the 16 states that comprise the Southern region. Some of the major historical events and periods that shaped the South include the American Revolution, Civil War, industrialization in the late 19th/early 20th century, and the Great Migration. Famous figures like Martin Luther King Jr. and pivotal moments such as the Civil Rights Movement were important in advancing integration and equal rights for African Americans in the South.
Wc
This document discusses various types of toilets from different locations around the world, including toilets from Florence, Germany, England, France, New York, Japan, Florida, Paris, the Vatican, India, and customized toilets for musicians, Rosie O'Donnell, people with stomach problems, bankers, George W. Bush, and public toilets.
Viewers also liked (8)
Similar to Sailing yacht’s hull design upright
propulsion engineering-02-resistance of ships
propulsion engineering-02-resistance of shipsMarine Engineering (Marine Propulsion)
This program is designed for those students who want training in marine gasoline and diesel engines without immediately
pursuing the Associate in Science degree. The certificate is issued by the Marine Engineering Department and attests to
the completion of the courses outlined below. These courses may also apply to the A.S. degree in Marine Engineering if a
student later decides on that option. Program duration is one (1) calendar year.
Gasoline Engines (9 credits required)
MTE 1053C 2 & 4-Cycle Outboard Engine Repair & Maintenance (3)
MTE 1166C Marine Ignition and Fuel Systems (3)
MTE 2072C Marine Propulsion Gasoline Engine Troubleshooting (3)
Diesel Engines (12 credits required)
MTE 1001C Marine Diesel Engine Overhaul (3)
MTE 1056C Marine Diesel Systems (3)
MTE 2058C Diesel Engine Testing Troubleshooting Procedures (3)
MTE 2160C Diesel Fuel Injection Systems (3)
Program Core (Choose 4)
MTE 1183C Marine Engine Installation and Repowering Procedures (3) |
MTE 1400C Applied Marine Electricity (3)
MTE 1651C Gas & Electric Welding (3)
MTE 2054C Marine 4-Cycle Stern Drive Inboard Engines (3)
MTE 2062 Marine Corrosion and Corrosion Prevention (2)
MTE 2234C Marine Gearcase, Outdrives and Transmission System (4)
Total Credits Required: 32/34
Optional Factory Certifications:
Bombardier/Evinrude Marine:
° Evinrude E-Tec Outboards
° Evinrude E-Tech V Models
Mercury Marine:
° Propeller 1
° Corrosion 1
° Hydraulics
° Smart Craft 1
° Fuels and Lubes
° Fuel II
° Electrical II
° Navigating DDT
° Outboard Rigging
° Mercruiser EFI System
State of Florida :
° Safe Boating
° Livery Certification
Other Optional Certificatios:
° USCG Captains License
° American Welding Society, Welding Certifications
° FKCC Welding Certification
Wave resistance
This document discusses wave resistance in ships. It explains that wave resistance increases significantly at high speeds as waves generated by the ship grow larger. It also describes how the interference of bow and stern waves can result in either favorable or unfavorable wave patterns depending on their phase relationship. Finally, it discusses how ship speed is ideally operated in a "hollow" of the wave resistance curve where interference is favorable and resistance is lower.
Ship resistance in confined water
This document discusses the effects of shallow and restricted water on ships, including increased sinkage, trim, and resistance. It describes how squat, the combined sinkage and trim effect, increases sharply with ship speed. Empirical formulas are provided to estimate squat in canals and unrestricted shallow water. The changes to wave patterns and resistance at various ship speeds relative to the critical wave speed are also summarized.
30 questions in harbor and shore protection.pptx
The document contains 30 multiple choice questions about harbor and shore protection. Some key topics covered include types of sea walls, breakwaters, docks, and littoral drift. Questions test understanding of concepts like minimum basin diameters, lock gate design, and the impact of waves on coastal structures. The document is a quiz intended to assess knowledge of harbor and shore protection engineering topics.
offshore structural design detailed engineering fixed plate form
offshore structural design description, starts from codes and standards, data requirements, plate form data, extreme storm parameters, operational parameters and installation parameters
Chp5-part2.ppt
1. The document discusses methods for predicting ship resistance based on model test results. It notes that while friction resistance of a ship is assumed to equal a flat plate, there are differences in form resistance due to curvature.
2. Form drag has three components: eddy-making, changes in local velocity, and interactions between viscous and wave-making resistances. Eddy-making is the main contributor and can be reduced by avoiding abrupt hull changes.
3. Series experiments using models with systematic variations are used to determine optimal hull forms and estimate resistance for actual ships. Well-known series include Taylor's Standard Series and Series 60.
Curso_Hidro_1.pdf
This document provides an introduction to offshore engineering and structures. It lists common questions addressed in offshore engineering like determining loads on offshore structures and ensuring safety and stability in various sea conditions. It then summarizes key aspects of important offshore units like suction dredgers, pipe laying vessels, and drilling vessels. For each, it outlines factors that determine workability and productivity in waves, like motions, loads, stability, and positioning capabilities. The document establishes the context for understanding challenges faced in offshore engineering.
Gravity dam
This document discusses the key forces acting on a gravity dam, including its weight, water pressure, uplift pressure, silt pressure, wave pressure, and earthquake forces. It defines key terms like structural height, maximum base width, and hydraulic height. It also provides details on how to calculate or estimate the various forces, for example explaining that water pressure acts normal to the face of the dam and can be calculated based on horizontal and vertical components. Uplift pressure is defined as the upward pressure of water seeping through the dam or its foundation. Earthquake forces cause random vibrations that impart accelerations to the dam's foundation.
unit-2.pdf
This document discusses gravity dams and earth dams. For gravity dams, it describes the typical cross-section and forces acting on the dam, including water pressure, dam weight, uplift pressure, and more. It also discusses potential failure modes like overturning, sliding, compression, and tension. For earth dams, it outlines the components including shells and cores, and failure causes such as hydraulic failure from overtopping, seepage failure, and structural failure from cracking or sliding. It provides details on preliminary sections for earth dams and criteria for their safe design.
What are Submerged Bodies
This pdf includes about the submerged bodies and the forces acting on the submerged bodies. Different terminologies are discussed. Definitions of different bodies in the fluid are discussed as well.
It is small pdf with great knowledge, hope it will be helpful to the students.
Cel351 gravity damforces (1)
Gravity dams are solid structures constructed of concrete or masonry across a river to create an upstream reservoir. They resist forces through their own weight distributed in a triangular cross-section. Forces on gravity dams include the weight of the dam, water pressure, uplift pressure, silt pressure, wave pressure, and earthquake forces. Dams are designed to withstand these forces through computation of vertical and horizontal force components and consideration of factors like reservoir level, foundation type, and seismic zone.
Module 3(1 of 2)GravityDam Forces.pptx
This document provides an overview of forces acting on concrete gravity dams and how to compute them. The key forces discussed are:
1. Weight of the dam which provides stability. Other forces include water pressure, uplift pressure, silt pressure, wave pressure, and earthquake forces.
2. Water pressure acts both vertically and horizontally on dam faces based on reservoir level and geometry. Uplift pressure acts upwards through pores and needs to be estimated.
3. Earthquake forces cause random vibrations that impart accelerations and stresses in the dam. The document provides guidelines for computing seismic forces based on dam height and location.
Gravity dam forces
This document provides information about forces acting on gravity dams. It discusses the main stabilizing and destabilizing forces, including the weight of the dam, water pressure on the upstream and downstream faces, uplift pressure, earth and silt pressures, ice pressure, and other loads. It defines key terms related to gravity dams such as structural height, base width, axis, and explains how to calculate the various forces per unit length of the dam. Uplift pressure is explained as being dependent on the permeability of the dam and foundation materials and effective drainage. Design criteria for calculating uplift forces according to Indian standards is also summarized.
submarine
This document provides an overview of submarine design criteria. It discusses the following key points in 3 sentences:
1. Optimal submarine shapes have a circular cross-section for structural strength at depth, a length-to-diameter ratio of 6-7 to minimize resistance, and smooth surfaces to reduce skin friction drag.
2. Factors like prismatic coefficient, draft, diving depth, number of decks, and stability properties are also considered in the design based on the submarine's diameter and displacement.
3. Transverse stability depends on the position of the center of gravity and shape of the vessel, with higher freeboard and flare providing better stability compared to inward sloping sides with lower freeboard.
Chp5-part1.ppt
This document discusses ship resistance and dimensional analysis for ship resistance model testing. It provides the following key points:
1. Ship resistance comes from water resistance on the submerged hull and air resistance on the above-water portions. Dimensional analysis using Buckingham's Pi theorem is applied to resistance testing to reduce the number of parameters.
2. Model tests are conducted in towing tanks to measure the resistance of a scaled ship model at various speeds. Total resistance is broken into frictional resistance, which depends on Reynolds number, and wave-making resistance, which depends on Froude number.
3. By assuming these resistances are independent, the measured model resistance can be used to estimate the full-scale ship's
submarine pitot tube
Pitot tubes are used on submarines and surface ships to measure speed through water using Bernoulli's principle. A pitot tube has two openings - one facing the oncoming water to measure total pressure and one on the side to measure static pressure. The difference in these pressures is used to calculate water velocity and the ship's speed in knots. While simple and robust, pitot logs have errors at low speeds and from vibrations, debris, or mechanical issues. Alternatives for measuring speed include impeller logs, propeller RPM, GPS, Doppler velocity logs, and correlation velocity logs.
Fdocuments.in gravity dams-ppt
1. A gravity dam is a solid structure made of concrete or masonry that is constructed across a river to create an upstream reservoir. It resists forces through its own weight and triangular cross-section, with the widest part at the bottom.
2. Forces acting on a gravity dam include water pressure, uplift pressure, earthquake forces, and the weight of the dam itself. Uplift pressure is caused by water seeping through the dam and its foundation.
3. Dams are designed to withstand these forces through their weight and cross-sectional shape. Additional design considerations include drainage systems to relieve uplift pressure, and seismic design using coefficients and response spectrum analysis for earthquake forces.
i&hs.docx
This document provides information on drainage and inspection galleries in dams. The key points are:
1. Drainage and inspection galleries are tunnels within dams used for inspection, drainage, and access to outlet gates and spillway gates. Large dams have multiple galleries at different levels.
2. Drainage galleries reduce uplift forces in the dam foundation and body. They also facilitate inspection of the dam body.
3. Drainage galleries are typically placed at 7.5% of the dam height and have a minimum distance of 3 meters from the upstream face and foundation. They are usually 1.5 meters wide and 2.5 meters high with reinforcement. Drainage holes release uplift forces in the foundation and body.
Dam engineering
This document provides information about dams and spillways. It discusses different types of dams including gravity dams, earthen dams, rock and fill dams, arch dams, and buttress dams. For gravity dams specifically, it describes the key components, forces acting on them, theoretical and elementary profiles, galleries, and construction joints. Earthen dams are also briefly introduced.
Similar to Sailing yacht’s hull design upright (19)
offshore structural design detailed engineering fixed plate form
offshore structural design detailed engineering fixed plate form
More from Narwhalis Marine Hybrids Ltd
Innovanautic presentacion 120229 cas interface
INNOVANAUTIC, diseña sus sistemas de interfase para poder aportar
la información que el usuario precisa sobre el sistema, habiendo
tratado convenientemente los datos para que sea útil.
Hay informaciones básicas de navegación que siempre se encuentran
visibles aún cuando se encuentre en otra pantalla.
Innovanautic presentacion 111105 ca sb
Este documento describe los sistemas avanzados de propulsión y gestión de energía de Innovanautic. Innovanautic desarrolla equipos de propulsión eléctrica y sistemas de gestión energética para embarcaciones que mejoran la eficiencia, seguridad y confort a bordo. Sus sistemas integran fuentes renovables y de almacenamiento para gestionar la energía de manera óptima.
Presentacion INNOVANAUTIC
Este documento describe los sistemas avanzados de propulsión y gestión de energía de Innovanautic. Innovanautic desarrolla equipos de propulsión eléctrica y sistemas de gestión energética para embarcaciones que mejoran la eficiencia, seguridad y confort a bordo. Sus sistemas integran fuentes renovables y de almacenamiento para gestionar la energía de manera óptima.
Propulsión eléctrica xp hector otero
El documento presenta un resumen de los sistemas de propulsión eléctrica para embarcaciones. Explica la estructura típica de estos sistemas, que incluye la generación de energía eléctrica a través de generadores impulsados por motores diésel u otras fuentes, el almacenamiento en baterías, y la propulsión a través de motores eléctricos. También describe brevemente los diferentes tipos de generadores, captadores, baterías, rectificadores, inversores y motores que componen estos sist
Innovanautic tech intro pdf
The document describes a new e-propulsion system for boats developed by Innovanautic. The system uses electric motors powered by batteries and/or generators for propulsion. This improves efficiency over internal combustion engines. The system's energy management optimizes energy usage from various renewable and conventional sources. It allows boats to be powered safely, comfortably and in an environmentally friendly manner with significant energy and cost savings compared to fossil fuel systems. Innovanautic tailors e-propulsion systems for different boat sizes and applications.
Innovanautic TECHNICAL
The document describes a new e-propulsion system for boats developed by Innovanautic. The system uses electric motors powered by batteries and/or generators for propulsion. This improves efficiency over internal combustion engines. The system's energy management optimizes energy usage from various renewable and conventional sources. It allows boats to be powered electrically for comfort while reducing environmental impact. Innovanautic tailors e-propulsion systems for different boat sizes and uses, with the goal of providing energy savings, environmental friendliness, safety, and economic benefits over fossil fuel-powered boats.
Sailing Yacht’S Hull Design
There are three major components that make up the resistance forces on a sailing yacht: 1) Viscous resistance, which includes friction resistance between the hull and water and viscous pressure resistance based on the hull shape; 2) Wave resistance, which is generated as the yacht displaces and deflects water, forming waves that take energy from the yacht's movement; 3) Additional resistance, including aerodynamic resistance of the sails and hydrodynamic resistance of components like the rudder and centerboard.
Propulsión eléctrica naval (hector otero)
Este documento describe los sistemas de propulsión eléctrica para embarcaciones híbridas. Explica la historia, estructura y componentes clave de estos sistemas, incluyendo generadores, captadores, baterías, rectificadores e inversores. También analiza las ventajas y aplicaciones de los sistemas de propulsión eléctrica, como la reducción de emisiones y costos de combustible.
PropulsióN EléCtrica Xp Hector Otero
Este documento describe los sistemas de propulsión eléctrica para embarcaciones híbridas. Explica la historia, estructura y ventajas de estos sistemas. Los sistemas de propulsión eléctrica generan energía eléctrica a través de generadores impulsados por motores diésel u otras fuentes y usan esta energía para impulsar motores eléctricos. Ofrecen ventajas como un menor consumo de combustible y emisiones. El documento también discute las tendencias futuras hacia el uso de energías renovables
More from Narwhalis Marine Hybrids Ltd (11)
Recently uploaded
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
一比一原版亚利桑那大学毕业证(UA毕业证书)如何办理
学校原件一模一样【微信：6496090】【亚利桑那大学毕业证(UA毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版阿肯色大学毕业证(UCSF毕业证书)如何办理
学校原件一模一样【微信：6496090】【阿肯色大学毕业证(UCSF毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
一比一原版马里兰大学毕业证(UMD毕业证书)如何办理
学校原件一模一样【微信：6496090】【马里兰大学毕业证(UMD毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
一比一原版(LSBU毕业证书)伦敦南岸大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(LSBU毕业证书)伦敦南岸大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
International Upcycling Research Network advisory board meeting 4
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
一比一原版布兰登大学毕业证(BU毕业证书)如何办理
学校原件一模一样【微信：6496090】【布兰登大学毕业证(BU毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版美国哥伦比亚大学毕业证Columbia成绩单一模一样
原件一模一样【微信：6496090】【美国哥伦比亚大学毕业证Columbia学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Recently uploaded (20)
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
International Upcycling Research Network advisory board meeting 4
International Upcycling Research Network advisory board meeting 4
Sailing yacht’s hull design upright
- 1. Sailing Yacht’s Hull Design
- 3. Forces and moments on a sailing yacht
- 5. The Viscous resistance *Due to the frictional forces between the hull and the water *The viscosity gives rise to this component. *Boundary layer is the water close to the hull that moves with it.
- 6. The Friction resistance *Directly due to the friction between the water and the hull surface. *Based on the Reynolds number Rn=V*L/v Rv=1/2*p*Aw*V*Cv *The wetted area gives rise to this component
- 7. The viscous pressure resistance *Based on the Bernouilli’s ecuation that relates the velocity of the flow with it’s pressure. *The bow and stern pressures are higher than in the middle part of the hull. *It depends basically on the shape of the hull
- 8. Wave resistance. *The second major resistance component *When a yacht sails through the water, deflects a volume of water. *This one generates two trains of waves. *The wave formation takes energy from the movement of the yacht. *Based on the Froude number: Fn=V/(g*L)1/2
- 9. Additional resistance. *Due to the aerodynamic resistance *Due to the roughness Due to the hydrodynamic resistance of HEEL, PROPELLER, RUDDER and LEEBOARD
- 11. THE END