Mr. C.H. Bhadsavle presented on the Saguna Rice Technique and the socio-economic aspect of it at Regional Review and Planning Workshop 2017, Hanoi, Vietnam
Effect of Crop Residue Management in Rice-Wheat Cropping System.pptxPRAVEEN KUMAR
The rice-wheat cropping system is India’s most widely adopted cropping system on an estimated area of around 12 m ha.
In India about 700 m tons of crop residue are being produced per year.
Approximately 250 m tons of residues are produced annually in rice-wheat cropping system in Indo-Gangetic plains.
Crop residue means anything which is leftover the harvested crop after the removal of economic produce from the crop plants.
Crop residue is defined as the vegetative crop material left on the field after a crop is harvested.
It is primary source of C and have significant effect physical, chemical and biological properties of soils.
Effect of Crop Residue Management in Rice-Wheat Cropping System.pptxPRAVEEN KUMAR
The rice-wheat cropping system is India’s most widely adopted cropping system on an estimated area of around 12 m ha.
In India about 700 m tons of crop residue are being produced per year.
Approximately 250 m tons of residues are produced annually in rice-wheat cropping system in Indo-Gangetic plains.
Crop residue means anything which is leftover the harvested crop after the removal of economic produce from the crop plants.
Crop residue is defined as the vegetative crop material left on the field after a crop is harvested.
It is primary source of C and have significant effect physical, chemical and biological properties of soils.
Pulses are a very important source of protein in Indian diets as majority of population is vegetarian. however, the production of pulses is not keeping pace with the growing population in the country. lentil is one of the important Rabi pulses. it is one of the oldest pulse crops and the most nutritious of the pulses. it is also used as a cover crop to check the soil erosion in problem areas. lentil contributes about 6% in total pulses area as well as production of India. It is mostly eaten as "DAL". the pulse is first converted into split pulse or 'dal' by the removal of skin and the separation of the fleshy cotyledons. It is cooked easily and hence preferred. It is good for patients too. Lentil contains about 11% water, 25% protein and 60% carbohydrates. It is also rich in calcium, iron and niacin
this slide includes recent approaches to evaluate cropping system.
It includes system profitability,relative production efficiency,land use efficienct(LUE),Calculation of LUE,energy efficiency,specific energy,Rotational intensity,Cropping intensity,Multiple cropping index(MCI),Land equivalent ratio (LER),Relative yields total (RYT),Crop equivalent yields (CEY),Relative Spread Index
Weed competition is a major limiting factor for the productivity of crops. Weed control is one of the main concerns in organic farming. Weed depletes nutrient, water and light their by reducing crops yields drastically. The chemical intervention is not permitted for weed control purpose in organic farming system. Apprehension regarding the consequence of managing weeds without the use of herbicides is a major factor limiting the adoption of organic farming by conventional growers. As wide spread application of herbicides has led to concern about contamination of environment, residues problems in soil and water, toxicity to animals and appearance to resistant weeds. The elements to consider in controlling weed problems are only the non chemical methods of weed control. These include physical /mechanical, cultural and biological methods of weed control.
Pulses are a very important source of protein in Indian diets as majority of population is vegetarian. however, the production of pulses is not keeping pace with the growing population in the country. lentil is one of the important Rabi pulses. it is one of the oldest pulse crops and the most nutritious of the pulses. it is also used as a cover crop to check the soil erosion in problem areas. lentil contributes about 6% in total pulses area as well as production of India. It is mostly eaten as "DAL". the pulse is first converted into split pulse or 'dal' by the removal of skin and the separation of the fleshy cotyledons. It is cooked easily and hence preferred. It is good for patients too. Lentil contains about 11% water, 25% protein and 60% carbohydrates. It is also rich in calcium, iron and niacin
this slide includes recent approaches to evaluate cropping system.
It includes system profitability,relative production efficiency,land use efficienct(LUE),Calculation of LUE,energy efficiency,specific energy,Rotational intensity,Cropping intensity,Multiple cropping index(MCI),Land equivalent ratio (LER),Relative yields total (RYT),Crop equivalent yields (CEY),Relative Spread Index
Weed competition is a major limiting factor for the productivity of crops. Weed control is one of the main concerns in organic farming. Weed depletes nutrient, water and light their by reducing crops yields drastically. The chemical intervention is not permitted for weed control purpose in organic farming system. Apprehension regarding the consequence of managing weeds without the use of herbicides is a major factor limiting the adoption of organic farming by conventional growers. As wide spread application of herbicides has led to concern about contamination of environment, residues problems in soil and water, toxicity to animals and appearance to resistant weeds. The elements to consider in controlling weed problems are only the non chemical methods of weed control. These include physical /mechanical, cultural and biological methods of weed control.
No-till crop establishment of transplanted and direct seeded rice in Conserva...Sri Lmb
By Dr. Md. Enamul Haque
Coordinator, Nutrient Management for Diversified Cropping (NUMAN) and Conservation Agriculture Projects, Bangladesh
nted and direct seeded rice in Conservation Agriculture
Toxic effects of heavy metals : Lead and Arsenicsanjana502982
Heavy metals are naturally occuring metallic chemical elements that have relatively high density, and are toxic at even low concentrations. All toxic metals are termed as heavy metals irrespective of their atomic mass and density, eg. arsenic, lead, mercury, cadmium, thallium, chromium, etc.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...Travis Hills MN
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
The Evolution of Science Education PraxiLabs’ Vision- Presentation (2).pdfmediapraxi
The rise of virtual labs has been a key tool in universities and schools, enhancing active learning and student engagement.
💥 Let’s dive into the future of science and shed light on PraxiLabs’ crucial role in transforming this field!
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...Ana Luísa Pinho
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
Phenomics assisted breeding in crop improvementIshaGoswami9
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
BREEDING METHODS FOR DISEASE RESISTANCE.pptxRASHMI M G
Plant breeding for disease resistance is a strategy to reduce crop losses caused by disease. Plants have an innate immune system that allows them to recognize pathogens and provide resistance. However, breeding for long-lasting resistance often involves combining multiple resistance genes
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptxMAGOTI ERNEST
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
Comparing Evolved Extractive Text Summary Scores of Bidirectional Encoder Rep...University of Maribor
Slides from:
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Track: Artificial Intelligence
https://www.etran.rs/2024/en/home-english/
ANAMOLOUS SECONDARY GROWTH IN DICOT ROOTS.pptxRASHMI M G
Abnormal or anomalous secondary growth in plants. It defines secondary growth as an increase in plant girth due to vascular cambium or cork cambium. Anomalous secondary growth does not follow the normal pattern of a single vascular cambium producing xylem internally and phloem externally.
2. It is a Conservation Agriculture (CA),
zero till method of farming which does not
cause atrocity of tillage, completely stops
soil erosion, promotes natural production
of earthworms, increases organic carbon of
the soil, considerably increases
productivity of the land and added effect
of amazing happiness and confidence to
the farmer.