ROUTER Rb2011 uas 2hnd
•
0 likes•1,537 views
The RB2011UAS-2HnD is a wireless router powered by an Atheros 600MHz processor with 128MB RAM. It has five Gigabit LAN ports, five Fast Ethernet LAN ports, and an SFP port. It also features dual-chain 2.4GHz 802.11b/g/n wireless with a maximum power of 1W. Two models are available: the board-only RB2011UAS-2HnD and the RB2011UAS-2HnD-IN which includes a desktop enclosure, antennas, power supply, and LCD panel.
Report
Share
Report
Share
Download to read offline
Recommended
Rb1100 a hx2
This document summarizes the specifications of the RB1100AHx2 1U rackmount Gigabit Ethernet router. It has thirteen 10/100/1000 Ethernet ports across two 5-port switch groups, 2GB of RAM, a microSD card slot, and a dual core CPU that can handle up to 1 million packets per second. The router comes preinstalled in a 1U aluminum case ready for deployment.
AREDN
The document discusses AREDN, an amateur radio network that operates under FCC Part 97 rules to provide a high-speed data network when other infrastructure fails. It can transfer data at up to 54 Mbps but is not intended as a general internet alternative. The document provides information on hardware requirements, software links, typical configurations for connecting repeaters via RF links using AllStar nodes without registration, and telemetry settings for repeaters.
Allstar (AECS)
This document discusses the Allstar amateur radio communication network. It provides an overview of Allstar nodes, operating systems, and hardware requirements. Key points include:
- Allstar allows linking of amateur radio repeaters using IP networks like the internet or private networks. It uses Asterisk PBX software on Linux computers.
- Setting up an Allstar node involves purchasing a Raspberry Pi, signing up for an Allstar account, installing the HamVoip operating system image, and configuring the node.
- The document recommends running both public and private nodes, and describes how to interface Allstar with other systems like DMR, DSTAR and AREDN using a hub node.
- Long-range
American Fibertek MRX8685C Data Sheet
Buy the American Fibertek MRX8685C at JMAC Supply.
https://www.jmac.com/American_Fibertek_MRX8685C_p/american-fibertek-mrx8685c.htm?=slideshare
IT-ISS Power Smart - Intellisystem - Integrated Satellite Solutions
The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifiers / BUCs, and includes features to support
Monitor and Control (M&C) functions for several products. Most DC / AC powered BUCs, SSPAs and TWTAs can be integrated with the PowerSmart 2480, for an efficient and convenient hardware solution to provide POWER plus M&C control to an outdoor transmitter unit.
Wago pfc200 performance_class_controllers_brochure
WAGO's new PFC200 line expands their programmable controller offerings with advanced performance class PLCs. The PFC200 uses WAGO-I/O-PRO software for programming and process visualization in an easy-to-use environment. It comes in various fieldbus configurations and multiple ports, allowing it to act as a fieldbus gateway. The PFC200 offers a powerful 600MHz processor, large memory capacity, and compatibility with over 400 I/O modules in a compact footprint.
Best diagram for cisco 2901/k9 router specs
The Cisco 2901 ISR router is designed for branch offices, providing media collaboration, virtualization, and operational cost savings. It allows decoupling hardware and software for flexibility. Overall, the Cisco 2901 delivers secure data, voice, video, and application services for small to middle sized offices. It has features like EHWIC slots, Gigabit Ethernet ports, USB ports, and Compact Flash slots.
Introduction to Industrial Routers
E-Lins Technology provides an introduction to Industrial Routers. E-Lins Technology is one of the best suppliers of routers across the globe.
Recommended
Rb1100 a hx2
This document summarizes the specifications of the RB1100AHx2 1U rackmount Gigabit Ethernet router. It has thirteen 10/100/1000 Ethernet ports across two 5-port switch groups, 2GB of RAM, a microSD card slot, and a dual core CPU that can handle up to 1 million packets per second. The router comes preinstalled in a 1U aluminum case ready for deployment.
AREDN
The document discusses AREDN, an amateur radio network that operates under FCC Part 97 rules to provide a high-speed data network when other infrastructure fails. It can transfer data at up to 54 Mbps but is not intended as a general internet alternative. The document provides information on hardware requirements, software links, typical configurations for connecting repeaters via RF links using AllStar nodes without registration, and telemetry settings for repeaters.
Allstar (AECS)
This document discusses the Allstar amateur radio communication network. It provides an overview of Allstar nodes, operating systems, and hardware requirements. Key points include:
- Allstar allows linking of amateur radio repeaters using IP networks like the internet or private networks. It uses Asterisk PBX software on Linux computers.
- Setting up an Allstar node involves purchasing a Raspberry Pi, signing up for an Allstar account, installing the HamVoip operating system image, and configuring the node.
- The document recommends running both public and private nodes, and describes how to interface Allstar with other systems like DMR, DSTAR and AREDN using a hub node.
- Long-range
American Fibertek MRX8685C Data Sheet
Buy the American Fibertek MRX8685C at JMAC Supply.
https://www.jmac.com/American_Fibertek_MRX8685C_p/american-fibertek-mrx8685c.htm?=slideshare
IT-ISS Power Smart - Intellisystem - Integrated Satellite Solutions
The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifiers / BUCs, and includes features to support
Monitor and Control (M&C) functions for several products. Most DC / AC powered BUCs, SSPAs and TWTAs can be integrated with the PowerSmart 2480, for an efficient and convenient hardware solution to provide POWER plus M&C control to an outdoor transmitter unit.
Wago pfc200 performance_class_controllers_brochure
WAGO's new PFC200 line expands their programmable controller offerings with advanced performance class PLCs. The PFC200 uses WAGO-I/O-PRO software for programming and process visualization in an easy-to-use environment. It comes in various fieldbus configurations and multiple ports, allowing it to act as a fieldbus gateway. The PFC200 offers a powerful 600MHz processor, large memory capacity, and compatibility with over 400 I/O modules in a compact footprint.
Best diagram for cisco 2901/k9 router specs
The Cisco 2901 ISR router is designed for branch offices, providing media collaboration, virtualization, and operational cost savings. It allows decoupling hardware and software for flexibility. Overall, the Cisco 2901 delivers secure data, voice, video, and application services for small to middle sized offices. It has features like EHWIC slots, Gigabit Ethernet ports, USB ports, and Compact Flash slots.
Introduction to Industrial Routers
E-Lins Technology provides an introduction to Industrial Routers. E-Lins Technology is one of the best suppliers of routers across the globe.
Emergency cloud server
The document describes an emergency cloud system using a Raspberry Pi and wireless mesh network to provide internet services when conventional networks are unavailable. The system is designed to be portable, low-power, and survivable. It can host functions like an emergency management site, email server, and situational awareness tools. The document outlines the hardware, software configuration, and testing of the system using applications like D-RATS and an IRC chat server over the wireless mesh.
Multimax HSPA+ Dual Port M2M Router - Maxon Solutions
Multimax HSPA+ Dual Port M2M Router is best for apps from video streaming to expandable device monitoring. It features with two Ethernet ports and 2 Sim capabilities.
This rugged router 3G router is best for different range industrial M2M applications.
Cisco router configuration tutorial
The document provides information on configuring Cisco routers, including:
- Cisco IOS software uses different command modes to access groups of commands, including user EXEC, privileged EXEC, and configuration modes.
- IP addresses, routing protocols, and other settings are configured in privileged EXEC or configuration modes using commands like interface, ip address, router rip/ospf/eigrp, and more.
- Router and link status can be checked using LED indicators on ports and transceiver modules.
CCNA part 4 routers
Routers connect different networks together and allow communication between them. They use data packet transmission and come in two types: software routers and hardware routers, with Cisco being a major manufacturer of hardware routers. Routers have internal components like RAM, ROM, and flash memory and connect to networks via ports including LAN, WAN, and administrative ports. Routers also have different modes and configurations that allow users to manage and troubleshoot the device.
Cisco 1941 w basic configuration example
The Cisco 1941W router is designed to deliver security for transmitted data and wireless mobility. It has 2 Ethernet ports that support speeds up to 1000 Mbps. The 1941W differs from other Cisco ISR routers in that it does not have built-in layer 2 switch ports, requiring the purchase of a separate switch module. Basic configuration of the 1941W involves configuring router-on-a-stick between it and a switch to provide connectivity to both wired and wireless clients using a single DHCP pool.
ComNet FVT40D4SFP Data Sheet
The ComNet FVT/FVR40D4SFP optical video link transmits up to four 10-bit digital video channels and four bidirectional data channels over fiber optic cable using interchangeable SFP modules. It is designed for harsh industrial environments from -40 to 75 degrees Celsius. The device provides transmission over long distances while maintaining video quality and supporting various video and data transmission standards.
Cisco 1921 vs. cisco 1941 vs. cisco 1941 w
Cisco 1900 routers are designed for small branch networks and can evolve to support cloud-based services. They replaced the Cisco 1800 series and are now the most popular Cisco router. The Cisco 1900 series includes 1RU and 2RU models with up to 2 gigabit Ethernet WAN ports, an integrated service module slot, 11 LAN switch ports, hardware acceleration for encryption, an integrated wireless access point, and security features like intrusion prevention and content filtering.
Cisco 1921 vs. cisco 1941 vs. cisco 2901
The document compares the Cisco 1921, 1941, and 2901 routers. The Cisco 1941 and 2901 have more features than the 1921, such as additional WAN ports, interface slots, service module slots, USB ports, flash/RAM memory, LAN switchports, and support for voice/video capabilities. The 2901 has the most advanced features, including support for up to 35 digital voice ports and 100 Cisco Unity mailboxes.
Wide area networks
The document discusses wide area networks (WANs) and how they connect remote sites over long distances. It covers WAN connection types, components, and cabling used at layer 1. Layer 2 encapsulation protocols are explained, including HDLC, PPP, SLIP, X.25, Frame Relay and ATM. The summary restates that WANs connect distant sites, different connection options exist depending on needs, and common layer 2 protocols are used to encapsulate data for transmission over WAN links.
Day 10.1 enablingrip
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Aewin network security appliance network management platform_scb6982
The SCB-6982 is a desktop network system built with AMD embedded components. It features an AMD embedded G-Series SOC processor, up to 8GB of DDR3 RAM, 4 Gigabit Ethernet ports, mini-PCIe and SATA interfaces, and expansion options. The system is designed for network service applications and includes components that provide performance, security, and longevity.
Cisco router 1941 series datasheet
The document provides specifications for the Cisco 1941 router series, including the Cisco 1941 and 1941W models. It describes the key features such as integrated services, services on demand through software licensing, and high performance. Product specifications include memory, ports, power options, dimensions, and environmental specifications. Basic ordering information and sources are also listed.
Chapter6ccna
This document discusses IP routing and the Routing Information Protocol (RIP). It provides an overview of static and dynamic routing, including RIP version 1 and 2. Key points covered include how routing protocols discover and maintain routes, routing loops, RIP configuration, and commands to verify RIP operation.
2.4 g wireless indoor ap x202
The document describes the specifications of the 2.4G Wireless Indoor AP X202 access point. It has multiple wireless modes, uses 2.4GHz channels, has a built-in antenna, supports multiple SSIDs and roaming. It has an Atheros AR9341 MCU, 64MB RAM, 16MB flash memory, one LAN port, DC power jack, and two 3dBi antennas. It supports 802.11b/g/n wireless standards with a maximum throughput of 300Mbps and transmission power up to 26dBm. It has features like AP, gateway, and repeater modes, security, management, and monitoring functions.
Base station 2 p v2
The BS400 Base Station is an RF communication hub that connects material handling vehicles and mobile units to report data in real time. It wirelessly collects vehicle and operator data and provides various output options like a LAN web page, FTP connection, and email notifications without monthly fees. The LAN web page continually displays system activity in real time. The base station operates from 12VDC power and supports an Ethernet connection, RF long range communication, data storage, and temperature ranges from -20C to 70C.
SkidWeigh Plus, Base station 2 p v2
The BS400 Base Station is a wireless communication hub that connects material handling vehicles equipped with RF devices to report data in real time. It stores vehicle and operator data from mobile RF units and provides various output options like a LAN web page, FTP connection, and email notifications without monthly fees. The LAN web page continually displays system activity and reports data in real time.
WIZNET Ethernet
This document discusses several serial to Ethernet converter modules:
- The modules convert serial RS232 data to Ethernet to allow serial devices to connect to a network. They translate data from RS232 modules to servers.
- Modules include the WIZ100SR, WIZ105SR, WIZ107SR, WIZ110SR, WIZ108SR, WIZ127SR, WIZ120SR, WIZ125SR, WIZ140SR and WIZ145SR. Each has different features like number of serial ports, speed, and interface type.
- The modules provide stable and reliable conversion using Wiznet chips and allow easy configuration through web, telnet interfaces or configuration tools.
Mr1300
The American Fibertek 1300 Series transmits high-quality video and bi-directional RS232 communication on a single multimode optical fiber. It provides one-way video and two-way RS232 using off-the-shelf components that require no field adjustments. The system is available as standalone modules or rack cards, and additional options allow for enhanced applications such as audio or data transmission.
ComNet FVT80D4SFP Data Sheet
Buy the ComNet FVT80D4SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80D4SFP_p/comnet-fvt80d4sfp.htm?=slideshare
SPI Interface
http://blog.ittraining.com.tw/2015/09/mx25l-spi-flash.html
http://www.ittraining.com.tw/ittraining/course/embedded/devicedriver
Brocade VDX 6730 Converged Switch for IBM
The document describes the Brocade VDX 6730 converged switch for IBM, which provides both 10GbE LAN ports and native 8Gb Fibre Channel ports in a single switch. It is available in 1U and 2U models with different port configurations. The switch supports various connectivity options including ToR, FCoE storage, and bridging FC SANs and Ethernet fabrics. It offers high performance, availability features, and management tools.
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
This overview document gives a brief introduction of MYIR's MYC-Y6ULX CPU Module which is powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. It is ready to run Linux and delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module can support industrial operating temperature range from -40 to +85 Celsius.
More Related Content
What's hot
Emergency cloud server
The document describes an emergency cloud system using a Raspberry Pi and wireless mesh network to provide internet services when conventional networks are unavailable. The system is designed to be portable, low-power, and survivable. It can host functions like an emergency management site, email server, and situational awareness tools. The document outlines the hardware, software configuration, and testing of the system using applications like D-RATS and an IRC chat server over the wireless mesh.
Multimax HSPA+ Dual Port M2M Router - Maxon Solutions
Multimax HSPA+ Dual Port M2M Router is best for apps from video streaming to expandable device monitoring. It features with two Ethernet ports and 2 Sim capabilities.
This rugged router 3G router is best for different range industrial M2M applications.
Cisco router configuration tutorial
The document provides information on configuring Cisco routers, including:
- Cisco IOS software uses different command modes to access groups of commands, including user EXEC, privileged EXEC, and configuration modes.
- IP addresses, routing protocols, and other settings are configured in privileged EXEC or configuration modes using commands like interface, ip address, router rip/ospf/eigrp, and more.
- Router and link status can be checked using LED indicators on ports and transceiver modules.
CCNA part 4 routers
Routers connect different networks together and allow communication between them. They use data packet transmission and come in two types: software routers and hardware routers, with Cisco being a major manufacturer of hardware routers. Routers have internal components like RAM, ROM, and flash memory and connect to networks via ports including LAN, WAN, and administrative ports. Routers also have different modes and configurations that allow users to manage and troubleshoot the device.
Cisco 1941 w basic configuration example
The Cisco 1941W router is designed to deliver security for transmitted data and wireless mobility. It has 2 Ethernet ports that support speeds up to 1000 Mbps. The 1941W differs from other Cisco ISR routers in that it does not have built-in layer 2 switch ports, requiring the purchase of a separate switch module. Basic configuration of the 1941W involves configuring router-on-a-stick between it and a switch to provide connectivity to both wired and wireless clients using a single DHCP pool.
ComNet FVT40D4SFP Data Sheet
The ComNet FVT/FVR40D4SFP optical video link transmits up to four 10-bit digital video channels and four bidirectional data channels over fiber optic cable using interchangeable SFP modules. It is designed for harsh industrial environments from -40 to 75 degrees Celsius. The device provides transmission over long distances while maintaining video quality and supporting various video and data transmission standards.
Cisco 1921 vs. cisco 1941 vs. cisco 1941 w
Cisco 1900 routers are designed for small branch networks and can evolve to support cloud-based services. They replaced the Cisco 1800 series and are now the most popular Cisco router. The Cisco 1900 series includes 1RU and 2RU models with up to 2 gigabit Ethernet WAN ports, an integrated service module slot, 11 LAN switch ports, hardware acceleration for encryption, an integrated wireless access point, and security features like intrusion prevention and content filtering.
Cisco 1921 vs. cisco 1941 vs. cisco 2901
The document compares the Cisco 1921, 1941, and 2901 routers. The Cisco 1941 and 2901 have more features than the 1921, such as additional WAN ports, interface slots, service module slots, USB ports, flash/RAM memory, LAN switchports, and support for voice/video capabilities. The 2901 has the most advanced features, including support for up to 35 digital voice ports and 100 Cisco Unity mailboxes.
Wide area networks
The document discusses wide area networks (WANs) and how they connect remote sites over long distances. It covers WAN connection types, components, and cabling used at layer 1. Layer 2 encapsulation protocols are explained, including HDLC, PPP, SLIP, X.25, Frame Relay and ATM. The summary restates that WANs connect distant sites, different connection options exist depending on needs, and common layer 2 protocols are used to encapsulate data for transmission over WAN links.
Day 10.1 enablingrip
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Aewin network security appliance network management platform_scb6982
The SCB-6982 is a desktop network system built with AMD embedded components. It features an AMD embedded G-Series SOC processor, up to 8GB of DDR3 RAM, 4 Gigabit Ethernet ports, mini-PCIe and SATA interfaces, and expansion options. The system is designed for network service applications and includes components that provide performance, security, and longevity.
Cisco router 1941 series datasheet
The document provides specifications for the Cisco 1941 router series, including the Cisco 1941 and 1941W models. It describes the key features such as integrated services, services on demand through software licensing, and high performance. Product specifications include memory, ports, power options, dimensions, and environmental specifications. Basic ordering information and sources are also listed.
Chapter6ccna
This document discusses IP routing and the Routing Information Protocol (RIP). It provides an overview of static and dynamic routing, including RIP version 1 and 2. Key points covered include how routing protocols discover and maintain routes, routing loops, RIP configuration, and commands to verify RIP operation.
2.4 g wireless indoor ap x202
The document describes the specifications of the 2.4G Wireless Indoor AP X202 access point. It has multiple wireless modes, uses 2.4GHz channels, has a built-in antenna, supports multiple SSIDs and roaming. It has an Atheros AR9341 MCU, 64MB RAM, 16MB flash memory, one LAN port, DC power jack, and two 3dBi antennas. It supports 802.11b/g/n wireless standards with a maximum throughput of 300Mbps and transmission power up to 26dBm. It has features like AP, gateway, and repeater modes, security, management, and monitoring functions.
Base station 2 p v2
The BS400 Base Station is an RF communication hub that connects material handling vehicles and mobile units to report data in real time. It wirelessly collects vehicle and operator data and provides various output options like a LAN web page, FTP connection, and email notifications without monthly fees. The LAN web page continually displays system activity in real time. The base station operates from 12VDC power and supports an Ethernet connection, RF long range communication, data storage, and temperature ranges from -20C to 70C.
SkidWeigh Plus, Base station 2 p v2
The BS400 Base Station is a wireless communication hub that connects material handling vehicles equipped with RF devices to report data in real time. It stores vehicle and operator data from mobile RF units and provides various output options like a LAN web page, FTP connection, and email notifications without monthly fees. The LAN web page continually displays system activity and reports data in real time.
WIZNET Ethernet
This document discusses several serial to Ethernet converter modules:
- The modules convert serial RS232 data to Ethernet to allow serial devices to connect to a network. They translate data from RS232 modules to servers.
- Modules include the WIZ100SR, WIZ105SR, WIZ107SR, WIZ110SR, WIZ108SR, WIZ127SR, WIZ120SR, WIZ125SR, WIZ140SR and WIZ145SR. Each has different features like number of serial ports, speed, and interface type.
- The modules provide stable and reliable conversion using Wiznet chips and allow easy configuration through web, telnet interfaces or configuration tools.
Mr1300
The American Fibertek 1300 Series transmits high-quality video and bi-directional RS232 communication on a single multimode optical fiber. It provides one-way video and two-way RS232 using off-the-shelf components that require no field adjustments. The system is available as standalone modules or rack cards, and additional options allow for enhanced applications such as audio or data transmission.
ComNet FVT80D4SFP Data Sheet
Buy the ComNet FVT80D4SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80D4SFP_p/comnet-fvt80d4sfp.htm?=slideshare
SPI Interface
http://blog.ittraining.com.tw/2015/09/mx25l-spi-flash.html
http://www.ittraining.com.tw/ittraining/course/embedded/devicedriver
What's hot (20)
Multimax HSPA+ Dual Port M2M Router - Maxon Solutions
Multimax HSPA+ Dual Port M2M Router - Maxon Solutions
Aewin network security appliance network management platform_scb6982
Aewin network security appliance network management platform_scb6982
Similar to ROUTER Rb2011 uas 2hnd
Brocade VDX 6730 Converged Switch for IBM
The document describes the Brocade VDX 6730 converged switch for IBM, which provides both 10GbE LAN ports and native 8Gb Fibre Channel ports in a single switch. It is available in 1U and 2U models with different port configurations. The switch supports various connectivity options including ToR, FCoE storage, and bridging FC SANs and Ethernet fabrics. It offers high performance, availability features, and management tools.
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
This overview document gives a brief introduction of MYIR's MYC-Y6ULX CPU Module which is powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. It is ready to run Linux and delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module can support industrial operating temperature range from -40 to +85 Celsius.
Practica 2
The document discusses examining networking devices like hubs, switches, and routers. It describes opening and analyzing different devices to identify components and understand their functions. Understanding the internal components gives insight into how each device works at a general level. Various specific devices are listed, including a Cisco switch and router, for analysis.
SDS_SSL_MPM_UN_A4
Multi-purpose Manager (MPM) devices enable wired and wireless control of HVAC, lighting, and metering applications. They provide integrated control solutions for entire sites or zones within large buildings via a web-based building management system. Key features include 6 universal inputs, 6 outputs, wireless support for EnOcean and ZigBee devices, Ethernet connectivity, and remote access and programming through StruxureWare Building Expert software.
IoT & M2M Modules - CASCADEMIC Solutions
IoT & M2M Modules
Low power Processor Modules
Bluetooth 4.0 modules
WiFi b/g/n Modules
Hall Sensor Module
Thermal Printer module
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius. employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.
Chapter 2.doc
The document discusses hardware requirements for a project, focusing on the Node MCU and related components. It provides an overview of the ESP-12E Wi-Fi module and Node MCU board, describing their features, pinouts, and applications. It also discusses the power supply requirements, including a step-down transformer, rectifier, filter capacitor, and 7805 voltage regulator. Finally, it briefly introduces the DHT-11 temperature and humidity sensor.
cisco-ws-c2960xr-48fpd-i-datasheet.pdf
The WS-C2960XR-48FPD-I is a rack-mountable, 1U switch that provides 48 10/100/1000 Ethernet ports with PoE+ and 2 10G SFP+ uplink ports. It supports up to 740W of PoE budget. The switch runs IP Lite IOS software, allowing for basic Layer 3 routing features. It includes stacking and redundant power supply options. The document provides specifications, features, and accessories for the switch. It also provides contact information for purchasing the switch from Hi-Network.
cisco-ie-2000-16tc-b-datasheet.pdf
The document is a datasheet for the Cisco IE-2000-16TC-B switch that provides the following information:
1) It is a 16-port 10/100 switch with 2 SFP ports and a LAN Base license, supporting basic Layer 2 features.
2) It has 16 RJ45 ports, 2 combo ports that can be used as additional RJ45 or SFP ports, and 2 dedicated SFP ports.
3) Various accessories and licenses are listed that can upgrade the switch such as additional memory, fiber optic modules, and license upgrades.
6lowpan introduction
6LoWPAN enables the use of IPv6 in low power wireless networks by providing an adaptation layer between IEEE 802.15.4 and IPv6. It addresses issues like large IPv6 header sizes, fragmentation, and mobility through techniques like header compression and micro-mobility support. By allowing wireless embedded devices to connect using standard IPv6 protocols, 6LoWPAN helps foster interoperability and is an important foundation for enabling the Internet of Things.
20170626 rsb4760 introduction
The RSB-4760 is an ARM-based box computer powered by a Qualcomm APQ8016 processor. It supports full HD display and integrated WiFi, Bluetooth, and GPS. It has mini PCIe and M.2 slots for expanding connectivity. The RSB-4760 comes with Android, Linux, and Windows 10 IoT operating systems preinstalled. It has 1GB/2GB RAM, 8GB storage, HDMI, Ethernet, USB, and various expansion ports.
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
The document introduced MYIR's i.MX 6UL / 6ULL based ARM Cortex-A7 Single Board Computer for Industry 4.0 and IoT applications which is ready to run Linux with high performance and ulta low cost.
cisco-sf302-08-datasheet.pdf
The Cisco SF302-08 is a managed Ethernet switch that provides 8 10/100 ports and 2 combo mini-GBIC ports. It has a switching capacity of 5.6 Gbps and can forward packets at a rate of 4.17 million packets per second. The switch supports features such as static routing, VLANs, QoS, ACLs, and remote management via SNMP, SSH, and HTTPS. It is suitable for small business networks needing up to 8 Fast Ethernet ports and limited Layer 3 functionality.
Cisco router configuration
This document provides an overview of Cisco router configuration and components. It describes Cisco router models such as the 2500, 4000, 7000 and 7500 series. It also describes various interface cards that can be used with different router models, including Fast Serial, Ethernet, Fast Ethernet, ATM, FDDI, HSSI, Channelized T3, and POS interface cards. Finally, it outlines the steps for initial router configuration, including determining the physical layout, connecting to the console port, accessing privileged modes, and saving configuration changes.
MYC-C7Z015 CPU Module
The MYC-C7Z015 CPU Module is an SOM (System on Module) board based on Xilinx XC7Z015 (Z-7015) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series FPGA logic, four 6.25Gbps SerDes transceivers and one PCIe Gen2 x 4 integrated block. The MYC-C7Z015 module has 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog on board. It provides a large number of I/O signals for ARM peripherals and FPGA I/Os through two 0.8mm pitch 140-pin board-to-board connectors, which is ideal for your next embedded design.
The MYC-C7Z015 CPU Module is compatible with MYIR’s MYC-C7Z010/20 CPU Modules and they can share the same base board which is designed by MYIR for evaluation or prototype purpose. The MYD-C7Z015 development board takes full features of the Zynq-7015 SoC. It has full features of the MYD-C7Z010/20 development board, additionally, it has one PCIe interface and one SFP transceiver module interface.
The MYC-C7Z015 CPU Module is ready to run Linux 3.15.0. It can be used in a variety of commercial, medical, automation, industrial, and military embedded applications.
Networking hardware
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines network interface cards in detail, describing their specifications and evolution over time from older cards to current gigabit Ethernet cards.
Networking hardware (2)
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines networking interface cards in detail, describing their specifications and evolution over time from older technologies like Token Ring and 10BaseT to current Gigabit Ethernet standards.
Networking hardware (2)
The document discusses various types of network hardware including local networking hardware like network interface cards (NICs), cables, connectors, hubs, switches, servers and workstations. It also discusses internetworking hardware like line drivers, transceivers, bridges, switches, routers and gateways. It describes the characteristics of different NICs such as their speed, connector type, and bus technology. It also examines concepts like IRQ, I/O address, base memory address, and DMA used for resource allocation on NICs. Finally, it discusses network connectors and different types of hubs.
Edge router x_ds
The document describes the EdgeRouter X and EdgeRouter X SFP advanced gigabit Ethernet routers from Ubiquiti Networks. The routers offer sophisticated routing features, advanced security and management through an intuitive interface, and high-performance gigabit ports. The EdgeRouter X has 5 Gigabit Ethernet ports and supports PoE pass-through, while the EdgeRouter X SFP has 5 Gigabit Ethernet ports with PoE and 1 Gigabit SFP fiber port. Both are powered by the EdgeOS operating system and provide carrier-class reliability and price-performance value.
Network project
This document provides specifications for several networking and printing devices:
- The Cisco Xtreme N Storage Router provides 802.11n wireless networking with features like access control lists and parental controls.
- The Cisco SF200 switches include 24-port and 48-port models with PoE, SFP uplinks, and management features like VLAN and QoS.
- The Dell 2350dn laser printer is a mono laser printer that prints up to 40 pages per minute with networking and scanning capabilities.
- The Cisco Aironet 1250 series access points support 802.11a/g/n and include features like 2x3 MIMO, 40MHz channels, and data rates up
Similar to ROUTER Rb2011 uas 2hnd (20)
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
Recently uploaded
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Recently uploaded (20)
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
ROUTER Rb2011 uas 2hnd
- 1. RB2011UAS-2HnD RouterBOARD 2011UAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful (up to 1W!) dual chain 2.4Ghz 802.11bgn wireless, RJ45 serial port, microUSB port and RouterOS L5 license. Two models are available - RB2011UAS-2HnD (board only) and RB2011UAS-2HnD-IN (comes with desktop enclosure, two indoor antennas for wireless, power supply and touchscreen LCD panel). General specifications CPU Atheros AR9344 600MHz Memory 128MB DDR2 SDRAM onboard memory Ethernet Five 10/100 Mbit Fast Ethernet ports with Auto-MDI/X Five 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X Wireless 2HnD: Built in 2GHz dual chain 802.11b/g/n wireless device 2HnD-IN: Also includes two 4dBi swivel antennas Expansion One fixed Gigabit Ethernet SFP cage (Mini-GBIC; SFP module not included) Extras Reset button, Reset jumper, RJ45 serial port, LCD panel, Temperature and Voltage sensors, powered micro-B USB connector Power options Jack 8-28V DC; PoE: 8-28V DC on Ether1 (Non 802.3af). 15W max consumption Dimensions 214 mm x 86 mm, Weight: 146g Operating System MikroTik RouterOS, L5 license Package includes RB2011, power supply, (depends on model: enclosure) Feature / Model 2011UAS-2HnD-IN 2011UAS-2HnD Enclosure Desktop - SFP port Yes Yes Serial port Yes Yes USB Yes Yes Wireless Yes Yes Antennas 2x built in 4dBi swivel None, MMCX connectors LCD display Yes - 802.11b/g RX Sensitivity TX Power 802.11n RX Sensitivity TX power 1Mbit -96 30dBm MCS0/8 20MHz -95 30dBm 11Mbit -80 28dBm MCS0/8 40MHz -92 30dBm 6Mbit -96 30dBm MCS7/15 20MHz -76 25dBm 54Mbit -80 27dBm MCS7/15 40MHz -73 25dBm