Rachit Khandelwal is a Controls & Automation Engineer with over 4 years of experience in project planning, installation, commissioning, testing, system programming and detailed engineering in automation and process control. He has worked for Emerson Process Management, ABB, and Precise Automation & Control on various projects involving DCS systems including testing, engineering, commissioning and handling control logics, HMIs, I/O assignments and more. He holds a BE in Electronics & Instrumentation and has expertise in developing logic in ABB DCS 800xA systems, designing hardware architecture, application software, test cases and communication protocols.

1. Rachit Khandelwal
Controls & Automation Engineer
E-Post: rachitkhandelwal03@yahoo.com
Mobile: +91-8826332465, 91- 9266632465
Professional Profile
 BE (Electronics & Instrumentation) with 4.4 years’ experience in Project Planning, Installation
commissioning and testing, system programming and detailed engineering in Automation and
Process control.
 Presently working for Emerson Process Management, Noida as a DCS Software (Testing)
Engineer from May-2013.
 Worked with ABB Global Industries & Services Ltd. (as an outsourced part of Axcend
Automation and software solution pvt. Ltd.) As an Application Engineer from Dec 2011.
 Worked with Precise Automation & Control pvt Ltd, (ABB’s Channel Partner), Vadodara as an
Application Engineer.
 Experience with different area of ABB Dcs such as Testing, Project Engineering, Logic
Design and implementation, and I/O assignment, System Design & Detailed Engineering in
Application.
Areas of Expertise
Design Engineering
• Conduct Study & Detail Engineering in managing the design & project commissioning,
development of Control logics, HMI Graphics for Automation Processes for clients across
India and overseas.
• Prepare Project Manuals; Test manuals, conduct tests & inspections for assessing any
deviations and make relevant modifications for final installation.
Project Planning & Execution
• Conceptualise project execution plans after thorough discussion with clients.
• Establish time span & schedules of project execution as per client specifics.
• Configure Hardware & Software configuration for DCS.
• Discuss project status/ review during the course of periodic project review meetings.
• Pre-Commissioning and Commissioning of the ABB DCS installation on site.
• Understanding and analyzing new requirements, designing test specifications, creation of test
plan and executing test cases manually.
Technical Skills
Have experience on the various project implementation activities, such as:
• Expertise in developing Logic in ABB Dcs 800xa 5.0/5.1.
• Hand-on Experience in installation, Testing, Commissioning of ABB Dcs 800xA.
• Designing Hardware architecture and application software design, integration and interface to
third-party systems
• Preparing the FAT,SAT, Site execution Methodology documents
• Familiar with communication Protocols (Modbus, Profibus, etc.)
• Design and develop the test cases, Test/diagnostic coverage analysis and manual execution
of test cases.
• Knowledge and working experience in different software’s of ABB like Freelance (ABB Dcs),
AC500 System (ABB Plc System), Compact HMI (ABB Plc System) and Digivis 500 (scada).

2. • Dcs I/O List, Control Loop, Interlock Schematics, Hook up diagrams and Data Sheets for
Field Instruments.
Key Projects Handled at EMERSON Process Management Power & Water
Solution Ltd :
Project : Ovation Security Centre 3.1 (OSC-3.1)
Job responsibilities:
To perform Product Type and System Type testing of Ovation security centre 3.1.
Creating Virtual machine with the help of OVF template provided by developer.
Installing and performing testing on required software like VA (MacAfee Software).Performing
scanning on various levels of Ovation.
Performing whitelisting and blacklisting of machines.
Project : Ovation 3.5.1
Job responsibilities:
To perform Product Type and System Type testing of Ovation-3.5.1
Performing product type and system type test for control builder, algorithm and HMI of Ovation-
3.5.1.
Responsible for writing various SVTP’s which are included as enhancement in Ovation-3.5.1.
Key Projects Handled at ABB Ltd :
Project : 800XA for Freelance Rev A
Job responsibilities:
To perform Product Type testing of Freelance Connect Software
The Freelance Connect Software for 800 XA provides functionality required to integrate the
Freelance 800F system with 800 XA SV 5.1 Rev A System through the Freelance OPC Server
Project : 800XA for Freelance Rev B
Job responsibilities:
To perform Product Type testing of Freelance Connect Software
The Freelance Connect Software for 800 XA provides functionality required to integrate the
Freelance 800F system with 800 XA SV 5.1 Rev B System through the Freelance OPC Server
Project : Christiana Lake Thermal Power End User: CENOVUS Power
Canada
Job responsibilities:
Performing product type and Application project testing for upgrading the project from Freelance
800F System to 800XA System.
Further I have also worked on project like:-
• Perform Product type testing on 9.2 SP2 Freelance systems.
• Upgrade 800xA 5.0 Sp2 Rev D to 800xA 5.1 Rev B and perform regression testing.
Key Projects Handled at Precise Automation & Control Pvt Ltd :
2

3. Project : 1000 TPD Cement Plant End User: Zambezi Portland
Cement Ndola, Zambia
Job responsibilities:
To prepare documents for FAT & SAT.
To perform overall DCS engineering & commissioning of plant with end user.
Project : 1000 TPD Cement Plant End User: Green Valley
Industries Ltd. (Meghalaya)
Job responsibilities:
To prepare documents for FAT & SAT.
To develop, control logic and graphics as per need of customer application.
To perform overall DCS engineering & commissioning of plant with end user.
Further I have also worked on small project like:-
• Commissioned AC-500 System (ABB PLC software) with DIGIVIS-500(ABB SCADA) in
Packing plant (Cement Packaging) System at Green Valley Industries Ltd. Meghalaya.
• Also worked on AC-500 SYSTEM (ABB Plc software) with CP-400 system (ABB HMI
system) for Development and commissioning of electrode based Welding System at
‘Kriton Weld & Equipment’, Por- Vadodara.
• Development and commissioning of Dust Handling System on AC-500 system (ABB PLC
software) in Parekh Solids, Por- Vadodara.
• Development and commissioning of Fan Guard System on AC-500 SYSTEM (ABB PLC
software) in PowerPoint technology, Vadodara.
Educational Qualification
Qualification: Bachelor of Engineering (Electronics & Instrumentation) from Rishiraj Institute of
Technology, Indore (M.P.) affiliated by RGPV Bhopal and approved by AICTE with 71.12% (First
Class).
Higher secondary: From Marthoma Higher Secondary School, Indore (M.P.) affiliated to M.P.
board, Bhopal with 60%.
High school: From Marthoma Higher Secondary School, Indore( M.P.) affiliated to M.P. board,
Bhopal with 62%.
COMPUTER LITERACY
Basic knowledge of Computer, MS-OFFICE, C
TRAINING:
• I have successfully completed Two weeks vocational training of 6th
semester in the
BHARAT SANCHAR NIGAM LIMITED (BSNL), Indore (M.P.).
3

4. • I have completed final semester training of Four weeks in the DIGITECH SOLUTIONS,
Indore (M.P.).
PROJECT SUBMITTED DURING DEGREE PROGRAMME
• I have completed my final semester project on Energy Prepaid Meter. It is an electronic
meter which works on prepaid tariff card and it is based on microcontroller.
• I have successfully completed my minor project on Speed Limit Alert. It is an speed
awareness system which is an UK’s technology.
AREA OF INTERESTS
• Process Instrumentation.
• Power Sector.
• Industrial Automation.
HOBBIES
• Listening songs, Net Surfing.
PERSONAL DETAILS
Name : Rachit Khandelwal
Date of birth : 3 March 1989
Father’s Name : Mr. Deepak Khandelwal
Permanent Address : ‘SHRISHARNAM’ 863/9 Nanda Nagar
Indore (M.P.)
E-mail : rachitkhandelwal03@yahoo.com
Language Known : English & Hindi
Contact Address : Flat-10052 Tower-3 Block-B GH-7 Apartment
Crossing republic Ghaziabad, U.P.
DECLARATION:
I hereby declare that all above information furnished by me is true in my knowledge.
Place: Noida
Date: - Rachit Khandelwal
4