Vinay Patil has over 6 years of experience as a senior software engineer specializing in PLC, DCS, and SCADA programming. He has extensive experience working on automation projects for clients in various industries. Some of the key projects he has worked on involve cement plant automation, power plant automation, and mineral separation systems. He is proficient in programming languages for controllers from manufacturers such as ABB, Schneider, and Rockwell. Patil is looking for a new challenging position that will further develop his skills and experience in process automation.

1. VINAY R. PATIL
Mobile : 9922449328 Add : 7/B Shiv-Shakti App,RM100 ,MIDC, Chinchwad Pune 19.
E-Mail : vinaypatil9328@gmail.com
Senior Software Engineer – Design and Automation
Senior Software Engineer with 6.8 years of experience in PLC, DCS & SCADA programming and handling Global
customer while working on projects. Highly focused with comprehensive understanding of PLC & SCADA
programming. Good analytical, interpersonal, problem-solving, communication skills.
Now looking for a new and challenging position, one which will make best use of existing skills and experience
and also further enhance my personal and professional development and ready to work on any automation
platform.
Core Competencies
Process Automation PLC Programming Requirement Analysis
Commissioning SCADA Programming Troubleshooting
Training HMI Programming
P&ID Drawing Understanding Customer Handling
Educational Qualifications:
Master of Science (MSc.) in Instrumentation from Pune University.
Technical Skills
• PLCs: ABB 500, Schneider Quantum, Momentum Series.
• HMI: Advantech Studio.
• PLC Programming Software: Familiar with Industrial PLC Software packages like Schneider Concept V-
2.5XL SR2 and Unity Pro. Proficient with FBD Language.
• DCS Software: ABB –800 XA (COMPACT /PROFFESIONAL CONTROL BUILDER M 5.0 SP1, 5.0 SP2), SCADA
PORTAL, COMPACT HMI (CONTROL BUILDER M 4.1).
• SCADA Software : ABB My Eplant , PROCESS PORTAL 2.1 (FOR 800 XA), PROCESS PORTAL 2.1(FOR SCADA
PORTAL), PROCESS PORTAL 2.1 (FOR COMPACT HMI), Advantech Studio V 6.0
• Instrumentation: Engineering, I/O testing, Loop checking, Calibration, Installation
commissioning. P&ID reading.
• Testing Tool: PLC/ SCADA Simulation bench (Test Rig), PCC, Genset Simulator, ATS Simulator,
AC injection kit for bitronix meter data simulator, Distribution panels and Load banks.
• Hands on National Instruments on LabView Ni-TestStand .
• Testing Experience on HIL System.
Previous Companies Experience:
• Working as Senior Software Engineer in KPIT Technologies Ltd, Pune from Nov’2010 - till date
Job Responsibility: Programming, Handle project independently, Technical discussion with Global base
project engineers and support issues. Technical Support and Conducting Training for Team members
throughout all phase of projects. Testing of Automotive feature using NiTest-Stand(HIL)
• Worked as Application Engineer in Precise Automation and Control Pvt. Ltd.( ABB System House) from
Nov’2008- Nov’2010
Job Responsibility: System Design and Programming on ABB DCS and PLC programming and SCADA
development. SAT, FAT and Commissioning activity.

2. • Worked as Project Trainee in Tata Motors Pune in 2007 (10 Months)
• Worked as Trainee Engineer in Logic Power Pvt. Ltd. Pune In 2006 (2.5 Months)
International Experience: 3 months of international experience of commissioning in Zambai. (Africa)
• Evaluating client requirements, programming, commissioning and Training customer engineer.
• Globally Handling customers for Technical Query and site support Esp. USA, Singapore, Australia and
Dubai.
Responsibilities:
• Plays key role in analysis of project requirements, Documentation of Sequence of Operating Procedures
(SOP) or control philosophy according to the customer requirement and validating functional testing.
• Development of PLC and HMI Logic in ABB Platform and Schneider Quantum Platform.
• Factory acceptance Test (FAT), Software acceptances Test (SAT), Commissioning, Training & Documenting
as per project.
• Understand P&ID,s and Loop description for different Process Plant and Implement the Logic and HMI
according to that.
• Creating Setup of Engineering Servers, Operator Station and other Peripherals.
• Alarm Area and Event Configuration to provide separate Alarms for Process Event, Maintenance etc.
• Technical discussion with other team members and Global Client.
• Commissioning and Pre-Commissioning experience outside of India (Zambai )
• Vendor handling experience. Supporting Internal and External Customers.
• Attain Project (Software) handover meeting with customer.
• Technical discussion with end customer and Global base project engineers.
• Testing the project on panels for validation.
• Key role in providing support to the engineering specifications in the design ensuring all requirements
Specified by the customer are met.
• Provide Training, mentoring to team member and Monitor the progress of projects..
• Simulation and testing on test bench located off-shore.
• Analysis, Coding, Integration and testing software which involves new feature introduction, as well as
Current feature support. Reviewing of software before release.
• Creation of delivery report (SAR), release note, all company related process documentation.
• Involve in weekly status report meeting with US, UK and Singapore team.
• Knowledge on full end to end process of Cummins Power Management.
• Start-up Pre Commissioning, Commissioning of system, train the operators & Engineer at site on control
system.
• Worked independently and also with team.
• Possess good communication, troubleshooting and problem solving skills
Projects Undertaken:-
Project (I) 1000 TPD GREEN VALLEY CEMENT Ltd (Meghalaya) Client:- Walchandnagar Ind. Ltd.
Description: This Project is based on complete automation which includes Crushing Mill,
Raw Mill, Kiln, Cement Mill.
Contribution: Development of Logic and SCADA, Preparing Operating manual.SAT,FAT.
Environment: Redundant AC800M (861) Controller, 800 series I/O’s Modules; Redundant Server;
2 Operating stations; SCADA: My EPlant, Protocol: Ethernet, Profibus.
Project (II) 1000 TPD ZAMBIA PORTLAND CEMENT Ltd (Africa) Client:- Walchandnagar Ind. Ltd.
Description: This Project Based on complete automation which includes Crushing, Raw
Mill, Kiln, Cement Mill.
Contribution: Handle this project independently, create the whole server and remote monitoring set

3. Setup. Commissioning and Modification of Logic and developing the Additional Screens as per
Requirements.
Environment: AC800M (861) Controller, 800 series I/O’s Modules; Redundant Server; ES;
2 Operating stations, SCADA: My EPlant ; Protocol: Ethernet, Profibus.
Project (IV) 2*25MW Thermal Power Plant ADITYA BIRLA, Client:- Thyssen Krupp Ind. Ltd.
Description: This Project Based on Automation of Boiler including Turbine.
Contribution: Commissioning, Logics & SCADA Changes as per site/Client
Requirement.
Environment: 4 Controllers X Redundant AC800M (864), 800 series I/O’s modules.
Servers: Redundant Aspect Server, ES, Operating Station.
Project (IV) 2*25MW Thermal Power Plant ULTRA TECH, Client: - Thyssen Krupp Ind. Ltd.
Description: This Project Based on Total Automation of Power Plant which included Boiler including
Turbine.
Contribution: As a Team Member, Commissioning of the whole plant.
Environment: 4 Controllers X Redundant AC800M (864), 800 series I/O’s modules.
Servers: Redundant Aspect Server, ES, Operating Station.
Project (V) 1000 TPD JUD CEMENT (MEGAHALAYA) Client: - Walchandnagar Ind. Ltd.
Description: This Project Based on complete Automation of Producing Cement which includes Crushing,
Raw Mill, Kiln, Cement Mill.
Contribution: Development of PLC Logic and HMI as per the P&ID, s and Process Flow.
Environment: Redundant AC800M, 800 series I/O’s modules; Redundant Server; operating station,
Control Builder 5.1; SCADA: My Eplant; Protocol: Ethernet, Profibus.
Project (VI) TRIMEX Sand Mineral Project (Andhra Pradesh) Client: - Walchandnagar Ind. Ltd.
Description: This Project Based on Separating Mineral’s from Sand.
Contribution: Commissioning of the Plant
Environment: Redundant AC800M, 800 series I/O’s modules; Redundant Server; operating station,
Control Builder 5.1; SCADA: My Eplant; Protocol: Ethernet, Profibus
Project (VII) Cummins Paralleling System.
Synopsis:
This project involves understanding and development of different Power Management process as per the
customer requirement using Cummins Power Generation Tools. To develop PLC, SCADA & HMI Software
applications which required to control power management and distribution projects using Schneider and
Rockwell automation Tools Communicate with different kind of Remote networking tools. Communication
tools like: Lonworks, Modbus, Modbus Plus, and Ethernet.
Also this project involves the short comings & disadvantages of the current Cummins Standards
templates which used to control the Power Management & Distribution systems. Also Prepare the Functional
and HMI Test Forms for testing the Power Management & Distribution software applications. This project
involves different power distribution/ generation devices like distribution panels, engines, load banks,
generators, monitoring controls, automatic transfer switches, fuel tanks, transformers, power cables and
switchgear equipment.
Different Modules Involved in the Project:
PLC Hardware: Schneider PLC - Quantum, Momentum.

4. HMI Hardware: Advantech,
HMI Software: Advantech 6.0/ 6.1,
PLC Software: Schneider - Unity Pro XL, Unity Dif, Concept 2.5
Communication Protocol: Ethernet, Modbus TCP/IP, Modbus plus.
Automation of Power Generators – PLC and HMI Programming, Simulation and Testing in a week using
Schneider UNITY, Concept and Advantech Software for automating load controls in Hospitals, Airports,
Datacentre’s and Shipping ports.
Handle around 80 projects independently for Genset power load control for Cummins globally in 4.0 Yrs.
Commissioned the sites in India like Sandvik India Ltd. Pune and IOC Business building Pune.
Contribution: As a Senior Software Engineer, responsible for the following.
• Plays key role in analysis of project requirements, documentation and validating functional testing
• Ensuring the non-functional requirements are achievable and subsequently met
• Design and development the system based on the requirement received from coordinator
• Simulation and testing on test bench located off-shore
• Ensure the defect free product delivered within timeline.
• Ensuring adherence to appropriate standards of technical best practice
• Development of PLC Logic in Unity 6.0 and Concept V-2.5 XL SR2
• Development of HMI/ SCADA application in Advantech Studio V 6.0 + SP1
• PLC HOT STANDBY configuration (Module 140-CHS-110)
• Calibration and testing of Electrical Tools and Automation control devices and safety circuits
• Develop Test Forms, FAT, SAT and Training & Commissioning documents as per project requirement.
• Alarm and event Viewer Configuration
• Alarm Area Configuration to provide separate alarms for Process Event, Maintenance etc.
• User security configure for Operator, Supervisor and Maintenance Engineer.
• Technical discussion with other team member
• Creation of delivery report (SAR) and release note.
Professional/Training Certifications:
Certified Automation Engineer (CAE) from Prolific Institute in October 2008.
Completed Training in C Language from Aptech Institute in the year 2004.
Achievements:
Felicitated with “Delighted Customer Award” for Customer Appreciation (2014)
Felicitated with “WOW” award multiple times (2011-2013)
Hobbies/Extracurricular Activities:
Travelling, Watching Movies, Reading Books.
Leading in Corporate Social Responsibility (CSR) initiative for department.
Academic Profile:
MSc. (Instrumentation ) – Pune University : Second Class (Pune, Maharashtra): 2009
BSc. (Electronics) – Nowrosjee Wadia College: Distinction Class (Pune, Maharashtra): 2005
H.S.C – Nowrosjee Wadia College: Second Class : 2002
S.S.C – Vidya Niketan ( Tata Motors ) : First Class : 2000
Personal Information:
Father’s Name: Mr.Ramchandra L Patil Languages Known: Marathi (Speak),English,Hindi.
Marital status: Single Date of Birth: 17th
Sep 1984 (Age: 30 yrs.)
Gender: Male Passport Details : G5264617 (Valid up to Oct 17)