- Atul Biradar is a project engineer with over 3 years of experience in automation and instrumentation. He has expertise in DCS, PLC, SCADA, and industrial networking systems. - He has experience managing large automation projects within budgets and timelines. His technical skills include programming Honeywell and Siemens control systems as well as developing SCADA applications. - His work experience includes projects for ONGC, IOCL, and other companies where he developed control logic, configured systems, and supported commissioning.

1. Resume
Atul Tryambakrao Biradar
Project Engineer, Virtuoso Automation Solutions
Mob: +91-9766935548 E-Mail: atultbiradar@gmail.com
OBJECTIVE:
Seeking a challenging and rewarding opportunity with an organization of repute, which recognizes my true potential and
effectively utilizes/ nurtures my excellent analytical and technical skills.
EXECUTIVE SUMMARY:
• Possesses 3+ years of experience In Automation & Instrumentation Field.
• Working as Project Engineer collaboratively with design engineers, operation engineers, purchasers and other
internal staff.
• Work with Engineer to designing and developing new control systems, testing, maintaining and modifying
existing systems.
• Project management within cost and time constrained environments.
• Implementing large Distributed Control system (DCS), Supervisory Control and Data Acquisition (SCADA),
Programmable Logic Control (PLC) control system upgrade projects.
• Well versed with Project engineering, DCS, PLC, SCADA, Industrial Instrumentation and
Industrial Networking.
• Software configuration of complete DCS package and operator friendly SCADA Application.
• Commissioning and configuration of Field instruments (Foundation Fieldbus & Conventional)
• Work with Engineer to develop project documents like Instrument index sheet, System configuration, System
architecture, I/O List, Data sheet etc.
• Calculation of IO points and suggesting the best PLC and SCADA Software.
• Has proficiency in several programming languages and control device networks for DCS systems, PLC’s and
PC’s
• Performing Factory Acceptance Test (FAT) and Site Acceptance Tests (SAT) of instrumentation/control
packages as necessary.
• Attend and contribute to site and project technical meetings as necessary.
• Familiar with field instruments i.e. Mass flow transmitter, Pressure transmitter, Differential pressure transmitter,
Temperature transmitter etc of different manufactures like as Endress+Hauser, Honeywell, Emerson system
etc.

2. TECHNICAL PROFICIENCY:
• Programming and commissioning of Honeywell DCS - Experion PKS R430 with C300 Red. Controller,
Experion PKS R410 with C300 Red. controller
• Programming and commissioning of Siemens PLC - S7 300, S7400, S7, 1200, S71500, ET200s on
platforms like STEP 7, TIA Portal V12 & V13
• SCADA for Honeywell (HMI Web Display Builder by EPKS)
• SCADA for Siemens (WinCC V7.0, WinCC V12)
• Database handling using Microsoft SQL Server 2008
• VB Scripting for HMI application development
WORK EXPERIENCE:
Organization Designation Duration
Virtuoso Automation Solutions Project Engineer March 2015 – Till date
Dyna Biotech Project Engineer Jan 2013 – March 2015
INDUSTRIAL EXPERIANCE:
ONGC Petro additions Limited (OPaL) Dahej, Gujarat. (PE & HDPE Project)
• Deputed as a Project Engineer for Functional testing and commissioning support
• Worked on Honeywell DCS Experion PKS R410 (C300 Redundant control System)
and ESD System (SM R145.1)
• To develop and modify the DCS Logic according to the process requirements
• To develop SCM for process sequence application
• To develop and modify the SM application as per the process requirements
• To develop and update the graphics for the same as per the user requirements
• To test and update simple and Complex loop as applicable
• IAMS Server and IAMS client configuration
• F&G Application and Graphics modification as applicable
• Configuration of Server and Console stations
• Interlock check and functional test of systems
• To troubleshoot system and hardware related issues

3. ONGC Petro additions Limited (OPaL) Dahej, Gujarat. (DFCU Project)
• One of the crucial petrochemical plants by ONGC in Oil & Gas industry in India.
• Deputed as a Project Engineer, responsible for Logic development, functional test and commissioning support
for Cracked Gas Drier & Cracked Gas Condensate Drier series under Dual Feed Cracker Unit (DFCU)
• Worked on Honeywell DCS Experion PKS R410 (C300 Redundant control System).
• To develop and modify the SCM according to the process requirements
• To develop the background logic for sequences as applicable
• To develop and update the graphics for the same as per the user requirements
• Sequence check and Logic check with the Pre commissioning team
• To check the sequence with cyclic operation of all driers with drier skip option
• To prepare the operating manual with client to operate the drier sequence using graphical interface
Indian Oil Corporation Limited (IOCL) Paradeep Refinery Project, Odisha.
• One of the largest Refineries in Oil & Gas industry with a huge and scattered cluster of Network.
• Deputed as a Project Engineer, responsible for commissioning and operational fulfillment of complete system
within dedicated Units (DHDT, HCDS & NHT CCR).
• Worked on Honeywell DCS Experion PKS R400.2 (C300 Redundant control System).
• Responsible for logic modification and graphics development as per process requirements.
• Commissioning of field instruments (FF and Conventional devices)
• Logic check and modification of simple and complex loops as per the process requirements.
• To develop the logic for third party packages
• To establish and configure the communication between third party systems and DCS through Modbus Protocols
using Terminal Server (Modbus TCP/IP and Modbus RTU)
• To upgrade the firmware for controllers, FIM and to upgrade the patches for DCS systems
• IAMS Server and IAMS client configuration
• To establish the complete Server Database Redundancy.
• Configuration of batch file to backup the Server database to backup server on periodic basis.
• To configure the server database using Microsoft SQL Server 2008.
• Implementing various software and hardware upgrades.
• To identify and troubleshoot the hardware and system related issues.
• Configuration of Server and Console stations as per the integration data and system architecture.

4. • Implementations of Fibre Optic Inter connectivity between different Satellite Control Rooms using Fiber Optic
to Ethernet Convertors.
• To establish DSA communication between multiple servers.
• Configuration of Community Server, Backup Client Machine and Backup Server.
• SAFEVIEW and IKB configuration at operator console stations as per user requirements.
• Configuration of Network Switches (Cisco Catalyst Series).
• To perform INC related activities as per the requirement.
Reliance Industries Limited (RIL) LTHE Project Dahej, Gujarat.
• Worked for project engineering and documentation
• Calculation of IO points and selection of IO modules based on the same
• To prepare System Architecture for complete system considering the scope of supply
• To design and prepare the HDM for System cabinet, PDB cabinet, Marshalling and Network Cabinets
• To Design and Prepare HDM for Server cabinet & IRP cabinets
• To prepare Typical Loop Diagram
• To prepare the IO assignment based on the customer inputs (JB wiring details, Instrument Index etc.)
MAXIFLOW 80 TFF System
• End user : EU Biologics, Korea
• Worked on Siemens TIA Portal V12 (S7 300 Controller)
• To develop PLC program for complete batch process carried out by Tangential Fluid Flow (TFF) System
• To develop the PLC program for CIP, SIP and Pressure Hold Sequence.
• To develop the graphics as per process requirement with Control Loops, Alarms, and Process Displays.
• To develop the VB Script for Report generation in customized format
• Work to establish a communication between PLC and HMI and third party interfaces(DCS).
• To develop the system architecture and design schemes and documents.
• Completed FAT of project.
Tubular Centrifuge System with Skid
• End User : Shantha (a Sanofi Company), Hyderabad
• Worked on Simatic Step 7 V5.5, & WinCC V11 (S7 300 Controller)
• The system was developed to carry out an intermediate process of trivalent vaccine production.

5. • To develop PLC program for complete batch process.
• To develop the graphics as per process requirement with Control Loops, Alarms, and Process Displays.
• To develop the VB Script for Report generation in customized format
• Work to establish a communication between PLC and HMI and third party interfaces(DCS).
• Develop the system architecture and design schemes and documents.
• Completed the FAT, SAT and commissioning of project.
OTHER SKILLS:
• Operating System : Windows XP/Windows 7/Windows Server 2008
• Software Language Known : C, Visual Basics (VB Script)
• Other : Microsoft Office 2003/2007/2010 (Word, Excel, PowerPoint).
EDUCATIONAL QUALIFICATION:
Institution Degree Year of Passing Percentage
M.G.M's College of Engineering Nanded
(S.R.T.M. University, Nanded)
B.E.
Electronics and
Telecommunication
2012 69
PERSONAL DETAILS:
• Marital Status : Unmarried
• Gender : Male
• Languages Known : English, Hindi, Marathi and Kannada
• Date of Birth : 5th Feb 1991
• Present Address : 'Jay Dwarka'
Hill Top Society, Taljai pathar, Dhankawadi
Pune - 411043
DECLARATION:
I hereby declare that all the details given above are true to the best of my knowledge and belief.

6. Date : Atul T. Biradar

7. Date : Atul T. Biradar