Anup Kumar Singh has over 10 years of experience in mechanical design and engineering of static equipment for oil and gas projects. He currently works as a Senior Engineer for Samsung Engineering in New Delhi, where his responsibilities include reviewing engineering documents, evaluating vendor bids, designing and reviewing equipment, and coordinating with clients. Some of the prominent projects he has worked on include projects in Kuwait, Abu Dhabi, Saudi Arabia, and India.

1. ANUP KUMAR SINGH
Contact: +91-9971199090 (India)
E-Mail: anup.sawang2000@gmail.com
PROFILE SUMMARY
 Mechanical Engineer with more than 10 years of experience in Mechanical design and detailed engineering & FEED
of Static equipments such as Pressure Vessels (Heavy thick vessels, Cladded & HIC vessels, Steam drums, Separator
,Scrubber, Filters, Knock out drums etc), Process Columns (Demethanizer , Depropanizer, Gasoline Stabilizer, Stripper,
Absorber etc), Reactors, Driers, Dearator, Heat-Exchangers and Process Packages as per International Codes/
Standards/Bulletin such as ASME Sec. VIII Division1 & Division 2, Sec IIA & IID, Sec IX, Sec V and other ASME/ANSI
codes & Standards, TEMA, API650, Wind code IBC/ASCE/ IS875, Seismic code IBC/ASCE/IS 1893, Local load analysis
WRC-107/297/537 etc. I have working experience of EPC as well as Vessel Fabrication for the different oil & gas
industries like Petrochemical Plants, Refineries, Fertilizers, Gas Processing Plants, LNG facilities.
 Experience in review of engineering documents (design basis, philosophies, PFDs, P&IDs, Datasheets, Study reports,
Vendor prints etc.); preparation / review of mechanical data sheets, material / purchase requisitions, technical bid
evaluation. Responsible for review of bids, data sheets, and drawings and mechanical design calculation and technical
documents for static equipment submitted by vendor
 Conversant with design specifications / standards of consultant and end user like EIL (Engineer s India Limited), LINDE,
TOYO, ZADCO, TAKREER, ARAMCO, SHELL, TECHNIP, CHOYIDA, UOP and SAMSUNG
 Experience with various material of construction (like Carbon steel, LTCS, Stainless Steels, Low Alloy Steel , and Claded
Steel etc). Handled various service requirements like NACE MR0175 & MR0103, HIC, SSC, HOHIC in Sour, Wet H2S
and Hydrogen service.
 Being a part of Quality assurance team of mechanical static team of Samsung Engineering I have good knowledge of
Quality management in project execution. Familiar with ISO standards and procedures, I implemented the same in
mechanical department being a quality representative.
 Working with U stamp vessel fabricator, gained practical knowledge of vessel fabrication, welding process, inspection
process, Heat Treatment Process etc. Witnessed various test methods (like hydro test, Radiography Test, etc.)
 Currently working as Senior Engineer- Static with Samsung Engineering, New Delhi from July’ 07 till date (9
years 4 months)
 Worked with Grand Prix, Delhi from Jul’06 till Jul’07 (1 year)
WORK EXPERIENCE
Samsung Engineering India Pvt. Ltd., New Delhi Jul’07 – Till date
Job Title: Deputy Lead Static Equipment
Designation: Senior Mechanical Engineer (Static)
Responsibilities:
 Review of engineering documents (design basis, philosophies, PFDs, P&IDs, datasheets, study reports, vendor prints
etc.), raise technical deviation with client / end user for unrealistic / unnecessary technical requirements.
 Bid clarification, kick-off and other technical meeting meetings with vendors, technical clarification meetings with
clients / end users.
 Evaluation of vendor deviations to take decision of acceptance or rejection based on project requirements .
 Preparation and review of Mechanical data sheets, Technical specifications, Material purchase requisition and Technical
evaluation of bids including technical clarification with bidders and preparation of bid analysis.
 Preparation of project specification related to static equipment in consultation with licensor.
 Clarification meeting with Client Representatives for approval of Project Specification.
 Preparation of engineering drawing by designing the equipment based on the process data sheet provided by the
licensor.
 P & ID review to check any mismatch in design and process requirement.
 Guidance to subordinate engineers and designers/draftsman.
 Clarification meeting with licensor to resolve the contradiction between process & mechanical issues
 Pre order visits of vendor facility to inspect and asses the vendor capability.
 Review of design calculation, detail drawing and other technical documents.
 Review and finalization of technical issues related to vendor documents at vendor’s facilities.
 Root Cause analysis (RCA), witness testing, safety awareness, HAZOP study and managing cost, time and resources.
 Review of spare parts interchangeability record (SPIR) submitted by vendor as per client requirement
 Technical co-ordination with client / end users for resolution of comments and approval of technical documents.
 Inter discipline co-ordination for finalization of technical issues and review of vendor print. Providing inputs for design
safety during various inter discipline meeting platform.
 Provide inputs to other Engineering department as required.
 Pay Site visit for technical assistance for critical equipment erection, internal fittings etc.
 Expedite the input information from H.O team and maintained the smooth interdepartmental coordination.

2. Grand Prix India New Delhi Jul’06 – Jul’07
Job Title: Design Engineer
Designation: Mechanical Engineer
Responsibilities:
 Activities performed: Manual Calculation to feed the draftsman for Detail drawings, PV-Elite Modelling of Vessels,
interaction with AII inspector for approval of Drawings and Calculations, co-ordination with fabrication shop regarding
practical problem related to fabrication
PROMINENT PROJECTS HANDLED
KNPC – CLEAN FUELS PROJECT 2020 (KUWAIT), ONSHORE
Client - KNPC
Designation / Role - Sr. Engineer S4 II / Deputy Lead
Assignment Period - From Apr 2014 to 30th
November 2016
Promoted as “Senior Engineer S4 II” in Apr.2014 and selected to work as Deputy Lead Engineer for this project.
Types of equipments involved were vessels, heat exchangers and columns (Total Nos. of Equipment – 60). I was handled
team of 3-4 Engineers and 2 designers. I also worked as assign engineer for the columns along with the role of Deputy
Lead.
TAKREER CBDC (ABU DHABI), ONSHORE
Client - TAKREER
Designation / Role - Sr. Engineer / Assigned Engineer
Assignment Period - From Jun 2012 to March 2014.
Worked as assigned engineer in this project and handled the engineering (study & preparation of silent points from ITB,
Technical query with client, Equipment design & Preparation of MDS, Preparation of requisition, Technical query with
vendor, Vendor bid evaluation, Vendor print review, interdepartmental coordination, project progress review etc) for
Vessels & Heat Exchangers.
LUBEREF YANBU REFINERY EXPANSION PROJECT, SAUDI ARABIA
Client - LUBEREF
Designation / Role - Sr. Engineer / Assigned Engineer
Assignment Period - From Dec 2012 to Jan 2015
Assisted in vendor print review. The Types of Equipments involved were Reactors, Vessels, Heat Exc hangers and Columns.
Total numbers of Equipments were 120.
OPAL DFCU & AU PROJECT, DHAEJ GUJARAT (INDIA), ONSHORE
Client - OPAL
Designation / Role - Engineer / Assigned Engineer
Assignment Period - From Jan 2009 to May 2011
Work as assigned engineer for OPAL DFCU & AU Project (Located at Dahej, Gujarat). Types equipment I handled were
medium to big columns, column internals, big vessels with vane type inlet device and mist eliminators, high thick catalyst
filled driers / reactors with hemispherical head design, total number of equipments were around forty along with internals.
I have the unique distinction of achieving a minimal site complaint on these critical items. I handled column/vessel
fabricators like GS Entec, Techno Process, HDO; and internal vendors like Sulzer, Munters and UOP. I also gained
sufficient experience on Vane Type Inlet Devices and Mist Eliminators and gained valuable experience on erection,
transportation and other aspects of big columns during this Project. Project duration was January 2009 to May 2011 . As a
recognition I was Promoted as “Senior Engineer S4 I” in Apr.2011.
SHAH UTILITIES & OFF-SITES PROJECT (ABU DHABI), ONSHORE
Client - Abu Dhabi Gas Development Company Limited
Designation / Role - Engineer / Assigned Engineer
Assignment Period - From Oct 2010 to March 2012
Equipment Handled - Vessels
NAPHTHA CRACKER PROJECT, MEG (EPCC-10), PANIPAT HARYANA (INDIA), ONSHORE
Client - IOCL
Designation / Role - Engineer / Assigned Engineer
Assignment Period - From July 2007 to June 2008
I handled the API 650 Tanks and also played the role of Samsung resident engineer at column vendor Alfa Laval, Pune.
U STAMP VESSEL DESIGN & FABRICATION PROJECTS IN GRAND PRIX
Clients - IOCL, ONGC, L&T, DRESSER RAND
Designation / Role - Engineer / Assigned Engineer
Assignment Period - From Aug 2006 to July 2007
As a assigned engineer performed the various activities related to U stamp vessel fabrication like PV-Elite modelling of
vessels, interaction with AII inspector for approval of drawings & calculations, coordination with fabrication shop and
witness various test methods (like hydro test, Radiography Test, etc.).

3. SPECIAL ASSIGNMENTS
Deputation to SEOUL for Assignments
 Assigned Engineer for Preparation of Specification for Static Equipment for Uz-Kor Gas Chemical LCC Akchalak,
Uzbekistan during deputation in Head Office from July 2008 to September 2008
 Deputed to SEOUL for engineering support for NGL RECOVERY FACILITIES SHAYBAH SAUDI ARABIA Project during
deputation in Head Office from June 2011 to August 2011
Short Term Assignments
 Salamanca ULSD PHASE II Project (Year 2014) (Client: - PEMEX):- Under this project I assisted the Head office in
vendor print review of Vessels and Columns.
 SOCAR Ammonia and Urea Complex Project (Year 2013) (Client: - State Oil Company of Azerbaijan Republic):- Under
this project I assisted the Head office in vendor print review of Vessels and Columns.
 Expedition of job by visiting vendor shop (Alfa Laval Pune) for MEG Project (IOCL, Panipat)
 Vendor Print review for Saudi Kayan Petrochemical Complex Amines Facilitie s Project
 Mechanical Design of Reactor , Study of Technical specification & Clarification with client, Review of vendor Quotation &
Technical clarification for the IPIC - Fujairah Refinery Project – Feed
Other Activities
 Worked as prominent team member in Samsung Engineering for the preparation of Instruction manual – mechanical
team operation instruction.
 Prepared excel program for Lifting & Tailing Lug Strength / WRC calculation for erection of skirt supported equipment,
excel program for ASME Section VIII Div.1 calculation for pressure vessels, presented paper on vortex shedding and
sour service during my tenure in Samsung Engineering.
 Attended the corporate training organized by Samsung head office in Seoul, Republic of South Korea also got
appreciation from head office in various project for efficiently handling the responsibilities as per schedule.
 Quality representative (QR) and GET mentor of mechanical team in Samsung Engineering since 2013
PROMINENT PROPOSAL WORK HANDLED
 Kuwait KOC GC-32 Project (Kuwait Oil Company) – July 2016 to Sep 2016 – Spec Analysis, Loading Data for column,
vessels, Reactor, Requisition ; Preparation of Requisition, Technical clarification with client and vendor , offer
evaluation , Preparation of TBE.
 Thailand PTTGC PO & POLYOLS (PTT Global Chemical Company, Thailand)- May 2016 to Sep 2016- Spec Analysis,
Loading Data for column, vessels, Reactor, Requisition ; Preparation of Requisition, Technical clarification with client
and vendor , offer evaluation , Preparation of TBE
 Ras Tanura Refinery Clean Fuel Project (Saudi Aramco) – March 2016 to May 2016- Loading Data for Columns and
Reactors
 Duqm Refinery Project ( Duqm Refinery & Petrochemical Industries Company LLC, Oman)- Dec 2015 to April2016-
Loading Data for Columns, Reactors, Preparation of Requisition , Technical clarification with client and vendor, Offer
evaluation.
 Fujairah Refinery Project – Feb 2014- Loading Data for column and Preparation of salient points of specification.
 GASCO IGD RUWAIS Project, UAE – March 2014 – Loading data for columns, reactors and vessels
 Vessel & Column design, Preparation of Requisition, TQ, TBE etc for OPAL DFCU & AU, Dhaej, Gujarat, India (From
Aug 2007 to April 2008)
 Vessel & Column design and thermal design for Heat-Exchanger for PTA Proposal work, Reliance, India.
 Vessel & Column design for BST Proposal work, Thailand
 Other Proposal work handled for:
I. Gabon Grassroots’ Refinery Project,
II. IRPC- Deep Catalytic Cracking Unit, Thailand
III. MRPL Phase-III Refinery Project, India
IV. Mundra LNG Regasification Terminal, GSPC LNG Ltd., India.
V. SARB Project Package#4, ADMA-OPCO, Arabian Gulf, UAE
VI. Takreer CBDC, Abu Dhabi.
VII. Umm Lulu Package#2, ADMA-OPCO, Arabian Gulf, UAE
PROFESSIONAL QUALIFICATION
 B.E Mechanical; Year: 2006; Bangalore Institute of Technology (Visvesvaraya Technological University {VTU})
 12th from CBSE Board from Pitts Modern School, Jharkhand (India)
 10th from CBSE Board from Kendriya Vidyalaya, Jharkhand (India)
COMPUTER SKILLS
 PV Elite & Compress For Code Calculation of Pressure Vessel
 B-Jac For Mechanical Calculation of H-Exchanger
 HTRI for thermal Calculation of H-Exchanger
 Nozzle Pro for Nozzle load FEM
 Auto CAD
 MS Office

4. PERSONAL INFORMATION
 Mother’s Name: Savitri Devi
 Father’s Name: Rameshwar Prasad Singh
 Address: SPR Imperial Estate, T2-704, Sector-82, Faridabad -121004, India
 Date of Birth: 14th May 1982
 Citizenship: Indian
 Passport No: L5146787
 Gender: Male
 Marital Status: Married
Declaration
I assure of working to the best of my abilities if provided with a challenging work atmosphere. I hereby solemnly declare
that the above stated information is true and correct to the best of my knowledge and belie f.
Anup Kumar Singh
Date: 31/12/2016
References:
Anand Kumar: - Email ID: ANKumar@ccel.ae; Contact No.: +-9715-09017582; Organization & Designation: Principal
Lead Engineer in CHIYODA CCC (Abu Dhabi, UAE)
Rahul Bhale: - Email ID: rahulbhale@gmail.com; Contact No.: +919891577972; Organization & Designation: HOD
Mechanical in MHI (Gurgaon, India);
Ranajit Manna: - Email ID: ranajit.manna@petrofac.com; Contact No.: +919818915693;Organization & Designation:
Project Manager in Petrofac (Gurgaon, India);
Sanjiv Prasad: - Email ID: Sanjiv.Prasad@snclavalin.com; Contact No.: +919818915693 & +971528672195;
Organization & Designation: Principal Mechanical Engineer in SNC- Lavalin (Abu Dhabi, UAE)