Jacque Pierre Dampier Jr. has over 30 years of experience in mechanical engineering, manufacturing, and quality control. He holds degrees in engineering technology and computer data processing. Dampier has worked in various roles including prototype coordinator, manufacturing supervisor, production supervisor, restaurant owner, manufacturing operator, and quality technician. He has strong skills in AutoCAD, Inventor, SolidWorks, ISO and quality systems, budgeting, and continuous improvement.
Advance maintenance & corrosion engineeringMarcep Inc.
ASSESSMENT OF THE GLOBAL COST OF CORROSION
The global cost of corrosion is estimated to be US$2.5 trillion, which is equivalent to 3.4% of the global GDP (2013). By using
available corrosion control practices, it is estimated that savings of between 15 and 35% of the cost of corrosion could be
realized; i.e., between US$375 and $875 billion annually on a global basis. These costs typically do not include individual safety
or environmental consequences. Through near misses, incidents, forced shutdowns (outages), accidents, etc., several
industries have come to realize that lack of corrosion management can be very costly and that, through proper corrosion
management, significant cost savings can be achieved over the lifetime of an asset.
Advance maintenance & corrosion engineeringMarcep Inc.
ASSESSMENT OF THE GLOBAL COST OF CORROSION
The global cost of corrosion is estimated to be US$2.5 trillion, which is equivalent to 3.4% of the global GDP (2013). By using
available corrosion control practices, it is estimated that savings of between 15 and 35% of the cost of corrosion could be
realized; i.e., between US$375 and $875 billion annually on a global basis. These costs typically do not include individual safety
or environmental consequences. Through near misses, incidents, forced shutdowns (outages), accidents, etc., several
industries have come to realize that lack of corrosion management can be very costly and that, through proper corrosion
management, significant cost savings can be achieved over the lifetime of an asset.
Apuesta tecnológica en el periodismo. El caso de lainformacion.com. Un estudi...Ana Isabel Bernal Triviño
Apuesta tecnológica en el periodismo. El caso de lainformacion.com. Un estudio etnográfico. Comunicación presentada al V Congreso Periodismo en Red. Universidad Complutense. Madrid. 15-16 noviembre 2011
1. Jacque Pierre Dampier Jr.
Jacque Pierre Dampier Jr., CMI, CQT
dampier_jack@yahoo.com
575.202.6075
1816 South Triviz Drive, Las Cruces, New Mexico 88001
EDUCATION
o New Mexico State University, Las Cruces, New Mexico.
Bachelor of Science Engineering Technology, Mechanical Engineering Technology, GPA 3.6.
o Doña Ana Community College, Las Cruces, New Mexico.
Associate of Applied Science in Mechanical Drafting & Solid Modeling, GPA 4.0, 2015.
Certificate in Mechanical Drafting & Solid Modeling, GPA 4.0, 2014.
Certificate in General Drafting & Graphics, GPA 4.0, 2014.
o Midlands Technical College, Columbia, South Carolina
Associate of Arts in Computer Data Processing, GPA 2.8, 1986.
Associate of Science in Engineering Technology, Mechanical Engineering Technology, GPA 2.8. 1984.
QUALIFICATIONS
o Seasoned hands-on worker that is capable of working on a multitude of projects at one time both
independently or as a team member.
o Strong working knowledge of ISO 9000, OS quality systems, SPC, TQM, and MOS.
o Procedures in the use Office 98 and 2013: Word, Excel, Access, and Power Point.
o Established Department Work Instructions and Departmental Quality System Procedures.
o Strong working knowledge and proficient in AutoCAD 1998, 2008, 2014 -2015. AutoCAD 3D, 2014 -
2015. AutoCAD Mechanical (Inventor) 2014 - 2015, and Solid Works 2013 – 2015.
o Designed, and working within the department budget, equipment justification for capital, and expense
projects.
o Continuous Improvement.
o Implementation of various cost reduction projects.
o Co-designed company’s Safety Program, and responsibly for upkeep, and yearly audits.
o Methods / Process Analysis, project management, problem solving, organizational: both verbal, and
written.
PROFESSIONAL DEVELOPMENT & HONORS
o Crimson Scholar Graduate Award. Doña Ana Community College-New Mexico State University,
Mechanical Drafting & Solid Modeling. May 2015.
o D3 (Drafting and Design Day), Thank You Letter, Doña Ana Community College, Las Cruces, New
Mexico, 2014.
o Professional Development and Leadership. Drafting and Graphics Association (DAGA)-Doña Ana
Community College, Lac Cruces, New Mexico, and The Humane Society of Southern New Mexico
(HSSNM). Volunteer work doing the surveying for Dog Park. 6 month, 2014.
1 | P a g e
2. Jacque Pierre Dampier Jr.
o Certification in OSHA – 10 hour Introduction to OSHA course. Doña Ana Community College, Las
Cruces, New Mexico, 2014.
o Certificate, Advanced Concepts of GD&T, Ford Company, Detroit, MI – J L French Corp., Sheboygan,
WI, 2002.
o Certificate, 5-S training, J L French Corp., Sheboygan, WI, 2002.
o Certificate, CMMS DDL for PSW, Ford Company –J L French Corp., Sheboygan, WI, 2002.
o Certificate, Direct Data Link – CMMS, Ford Company, Detroit, MI - J L French Corp., Sheboygan, WI,
2000.
o Certificate, Manufacturing Management I, and II, MRA – Institute of Management, Inc., Brookfield, WI, -
Padanaplast USA., Sheboygan, WI. 1999.
o Certification, and member, Mechanical Inspection and Quality Technician, American Quality Society
Control, Milwaukee, WI – Kohler, WI, 1995.
EXPERIENCE
Prototype Coordinator/Manager, J. L. French Corp., Sheboygan, WI. 01.00 > 01.05
Managed the engineering, manufacturing, accounting, purchasing, quality, scheduling of on – time
deliveries of prototype orders placed by customers (Ford, General Motors, and Chrysler) for a world
leading custom casting aluminum (360) with a multi plant location within North America, as well as, plant
locations aboard-Mexico, and Spain. Primary responsibilities includes; prototype cost estimate, requisition,
calculation, and study quantities.
o Plan and schedule team activities.
o Managed rapid prototyping in 3d printing.
o Request quotes from multiple outside suppliers for comparisons and generate quotes in a timely manner to
satisfy customers’ request.
o Communicate accurate machining requirements from customer to outside supplies and internal departments
and generate departmental work orders / work instruction and control plans.
o Maintained and tracked timelines from outside supplies, as well as, manage internal timelines.
o Request, analyzed and place orders through customer and engineering for changes on existing and new or
future products for functional and cost reduction purposes.
o Coordinate with customer, engineering and quality, inspection requirements.
o Schedule quality inspection and review data generate with outside supplies and internal department and
summit to customer for final approval.
o Coordinate with outside supplies and internal shipping departments proper packaging, tagging, labeling and
shipment meet customers’ requirements.
o Managed the product data management (PDM) for three years - PDM module include; part number, part
description, supplier/vendor, vendor part number and description, unit of measure, cost/price, schematic or
CAD drawing, and material data sheets.
Manufacturing Supervisor, Padanaplast USA, Inc., Sheboygan, WI. 11.97 > 11.99.
2 | P a g e
3. Jacque Pierre Dampier Jr.
As the second shift supervisor; associates 4 -5, responsible for manufacturing to meet on-time deliveries in
a fast paced custom plastic compounding (PEX-A) utilizing an ICMA twin screw extruder and the Tectnital
Material Bulk handing system.
o Works with Human Resources to select, interview.
o Organized and planned work structure along with assignments and responsibilities attached, ensures that
manufacturing plans are met.
o Monitored process and overall manufactory information systems, established corrective actions with
support services to solve equipment, scrap, and rate deficiencies.
o Lead and/or participated in the management of projects aimed at the continuous improvement of
operational process and system.
o Other responsibilities are human resources activities as they relate to performance measurement, and
compliance management.
o Hiring and terminating of employees.
o Communication and aligned employees with organizational goals and assists employees in managing and
understanding change.
o Ensuring compliance with occupational safety and health procedures including; reinforcement/reviewing
safety training, and policies with employees, accident prevention and hazard analysis, housekeeping, and
assisting in the management of worker’s compensation case for successful return-to-work.
Production Supervisor- permanent mold, Watry Industries, Inc., Sheboygan, WI. 10.95 > 11.97
As third shift supervisor in a fast paced, ISO 9000 certified modern machine shop in a cast aluminum,
responsible for meeting production demand utilizing 20 to 30 employees.
o By means for ensuring proper training and understanding of company’s policies, and philosophies.
o Participated in the continuous improvement of all operational processes.
o Set-up work stations, and non –CNC machinery for proper work flow and cycle time.
o Other responsibilities included; scheduling machine time, fallout, training, safety, and shipping.
o Ensuring compliance with ISO 9000 quality system, lead in the participation of new product development.
o Performed first piece inspection using proper measuring tool including, but not limited to; thread gauges,
mics, vernier, CMM along with programming of CMM GIDDINGS and LEWIS RS-30 cordax direct
computer control/coordinate measuring machine:
range: X=30", Y=40", Z=18".
o Aging (T4, T-5, T-51, T6 ,T61, and T7) Ovens, Electric, 800 degrees F. Maximum, (T6) Furnaces, Electric,
1000 degrees F., 4,000 lb. Capacity, (T6) Furnace, Electric, 1000 degrees F., 1,200 lb. Capacity, 2
-Preheated Water Quench Tanks, and 1 - air quench station.
o
Owner. JADE Pub and Grill Haus, Inc., Cleveland, WI. 06.95 > 01.97
Owns and oversees the operation of a restaurant and bar (Italian restaurant). 10 to 15 associates.
o Planned and implemented business plan.
3 | P a g e
4. Jacque Pierre Dampier Jr.
o Hiring and terminating employees.
o Established and maintained customer / supplier relation.
o I working has a cook, bartender, server, bar back, busser, dishwasher, and utility worker.
Manufacturing Operator, and Set-up Machinist, Engine Plant, Kohler Company, Kohler, WI. 05.92 > 09.95
Manufacturing Operator various CNC and non CNC machinery in a cast aluminum atmosphere.
o Assure products are built to the highest standard of quality.
o Ability to read, understand and communicate for manufacturing production.
o Good eye/hand coordination; lifting up to 50lbs; the ability to stand for periods of time.
o Comply with all safety policies and procedures. Wear personal protective equipment as required.
o Adhere to company attendance and work performance guidelines.
o Performed quality checks using proper gauging techniques.
Set-up Machinist-Flywheel line.
o Responsibilities included; setting up, adjusting, trouble shooting, tearing down, first piece inspection,
scheduling machines for meeting production demand and new product development.
o Various machine experience included, but not limited to; vertical and horizontal CNC and CNC boring,
drilling/tapping, broaching, milling, grinding, and punch presses.
o OKK PCV - 60 CNC High Speed Vertical Machining Center 40.00" 25.00" 21.00.
o Toyoda - FA-400 High Speed Horizontal Machining Center 20.00" 20.00" 24.00.
o Broaching-Key mate.
o 9” x 42” BIRMINGHAM Vertical Milling Machine.
o 12" X 36" Brown & Sharpe 3-axis hydraulic surface grinder.
o Steward for Local 833 for 2 years.
Operator / Leadsperson, and Assistant Warehouse Manager, Crafted Plastics, Inc., Sheboygan, WI. 03.87 > 05.92
Custom profile extrusion operator.
o Duties included but not limited to; setting-up, tearing-down, trouble shooting, quality check, and new
product development placed by customers, and changes to existing products.
o CO-EXTRUSION, DUAL DUROMETER, and TRI-EXTRUSION.
o Trained new employees to ensure proper procedures, and techniques are adapted and followed.
o Working knowledge with RPVC, PVC, LDPE, HDPE, STYRENE, and KODOR Petg.
4 | P a g e
5. Jacque Pierre Dampier Jr.
Leadsperson
o Accountable for the operation of production and quality of shift while foreman was absent.
o Associates 45 – 55.
o Other responsibilities included were shipping and receiving.
o Inventory control, safety, and involved in various TQM committees.
o Performed minor maintenance on all primary, and secondary machine shop equipment, Davis Standard 3
1/2" 24:1 L/D Thermatic extruders. Air rams. Punch Presses. Accupunch - Accurate cutting & punching
profiles in-line. Ink Jet Printer for in-line printing. Drill Presses, standard & pneumatic. Hot Stamp, 1 to 3
stamps simultaneously.
Assistant Warehouse Manager
o Assist with the operation of a modern storeroom/warehouse to include ordering, receiving, stocking,
processing and distribution of materials.
o Receive, inspect and store all standard storeroom stock and special order parts.
o Obtain quotes and negotiate comparative prices, order parts from vendors, and work within budget
constraints.
o Possess basic computer skills with the ability to use typical office programs.
o Utilize computer-based storeroom operations program and is thoroughly versed in its capabilities and
limitations.
o Operate forklift and other basic lifts and labor saving devices.
5 | P a g e
6. Jacque Pierre Dampier Jr.
Leadsperson
o Accountable for the operation of production and quality of shift while foreman was absent.
o Associates 45 – 55.
o Other responsibilities included were shipping and receiving.
o Inventory control, safety, and involved in various TQM committees.
o Performed minor maintenance on all primary, and secondary machine shop equipment, Davis Standard 3
1/2" 24:1 L/D Thermatic extruders. Air rams. Punch Presses. Accupunch - Accurate cutting & punching
profiles in-line. Ink Jet Printer for in-line printing. Drill Presses, standard & pneumatic. Hot Stamp, 1 to 3
stamps simultaneously.
Assistant Warehouse Manager
o Assist with the operation of a modern storeroom/warehouse to include ordering, receiving, stocking,
processing and distribution of materials.
o Receive, inspect and store all standard storeroom stock and special order parts.
o Obtain quotes and negotiate comparative prices, order parts from vendors, and work within budget
constraints.
o Possess basic computer skills with the ability to use typical office programs.
o Utilize computer-based storeroom operations program and is thoroughly versed in its capabilities and
limitations.
o Operate forklift and other basic lifts and labor saving devices.
5 | P a g e