Stanley Gill is seeking a design drafting position that allows him to apply his 2D and 3D modeling skills. He has over 20 years of experience in mechanical design, drafting, quality control inspection, and assembly/fabrication roles. His background includes creating drawings for storage tanks, safety control panels, railroad crossings, and other industrial equipment.

1. Stanley Vincent Gill II
7771 S. Memorial Dr. Apt#13301
Tulsa, OK 74133
Phone: (918) 430-8277
Alt. Phone: (918) 200-3029
E-mail:stanleygillii@yahoo.com
OBJECTIVE
A Design Drafting position that applies my skills in 2D and 3D modeling to improve the
design, analysis, and manufacturing cycles of the organization, while providing me
personal challenge and opportunity for growth.
WORK EXPERIENCE
Warehouse Forklift Operator (10/2015 – Present)
Macy’s Distribution, Tulsa, OK
Operate Stock Picker and Pallet Rider to pick and put away stock using gladiator
handheld scanner system. Also work in Packing, Picking, and Prep departments.
Designer/Checker (5/2015 – Present)
WillBros Group, Tulsa, OK
Create drawings for repaired and new above ground storage tanks per API 650 and 653.
Drawing packages include orientation; roof; shell; bottom; deck; floating roof; shell,
roof, and deck nozzles; sumps; manways; flush clean out; internal piping; foam piping;
seals; and stairs/ ladders. Create drawings and BOM's for shop, customer, and vendors.
Work with AutoCAD 2015, Inventor 2015, Vault Professional 2016, Outlook, Adobe
Acrobat, Excel, Word, and API 650 and 653.
Director of Design Department (10/2014 – 4/2015)
RSI(Railroad Signal International), Tulsa, OK
Create crossing, electrical schematic, and structural drawings with weld symbols for
cases, houses, gates, cantilevers, and signals for all railroad crossings. Participate in
interviewing new candidates, conduct Cad and SolidWorks test, and training employees
on AutoCad and SolidWorks. Supervisor for two employees, review and check all
drawings before final submittal, handle all discrepancies on drawings from shop and
customer, visit with outside vendors and check first article products, and creation of
Drafting Standards manual and products. Work with 3D SolidWorks 2015, 2D and 3D
AutoCAD Mechanical 2012, Adobe, Word, Excel, Google Earth, and Outlook computer
programs.
Mechanical Design/Drafter (6/2014 – 10/2014)
QED (Quality Equipment Design), Tulsa, OK
Create electrical and panel drawings, for customer and production, for safety control
panels. Create customer area layout drawings of control, power, conduit, and junction
box for customer refinery sites. Create new SolidWork blocks and library parts.Work
with 3D SolidWorks 2015, AutoCAD Electrical 2015, AutoCad Mechanical 2014/2015,
Word, Excel, PowerPoint, Vault, and Outlook computer programs.

2. Mechanical Design/Drafter (6/2011 – 5/2014)
Flowserve (Seal Support Systems Division), Tulsa, OK
Create customer, A3R, and production drawings for new release circulator and lubricator
skids, u-stamp pressure vessel reservoirs, and gas panels. Complete any ECN jobs,
revisions, and customer proposals. Create new CAD blocks and Inventor library parts as
needed. Review, check, and sign off on all drawings prior to final submittal. Participate
in creation of Standard drawings for different API piping plans, Welding Standards
drawing, P&ID Standards drawing, and Drafting Standards manual. Communicate with
Vendors for new parts, material discrepancies, and needed spec drawings. Work with 3D
Inventor, 2D and 3D AutoCAD 2012, Word, Excel, PowerPoint, Vault, Outlook, Link,
PRMS, and EIS computer programs. Help in shop with hydro, assemble, inspect, and
test gas panels and skids. Inspect all parts and completed skids. Use of a welder, fork
lift, and overhead crane.
Lead Q.C. Inspector (1/2011 - 6/2011)
Arrow Engine Co. (Gas Products Division), Tulsa, OK
Inspect, straighten, and stamp all incoming gas meters, all piping, and completed units.
Perform mag particle testing on all pipe. Review all X-Rays performed on pipe and make
sure corrections have been made. Record all measurements from pipe and meters.
Complete non-conformance reports on pipe or meters and Mic sheets for completed
sheets. Inspect finished painted skids, apply mic sheets, complete shipping documents,
take pictures of loaded units, and document any issues. Use of computer software,
internet, micrometer, bore gauge, mag particle, caliper, go-no go gauge, Cumberland
(stark or garrison) gauge, vacuum tester, grinder, air tools, welder, fork lift, overhead
crane, blaster, cutting torch, walkie talkie, and paint.
Mechanical Assembler/Q.C. Inspector (6/2010 - 1/2011)
S & R Compression, Tulsa, OK
Assemble compression and vapor recover skids, and rework skids from in the field.
Inspect all parts needed and completed units. Use of micrometer, bore gauge, welder
(mig & fluxcore), cutting torch, overhead crane, and forklift.
Sales (11/2008 - 1/2011)
Advance Auto Parts, Tulsa, OK
Help customers trouble shoot and diagnose car problems. Sell customers the right parts
the first time. Open and close the store according to proper procedures. Stock new
inventory on shelves. Run cash register.
Lead Mechanical Assembler/Q.C. Inspector (10/2009 - 5/2010)
Resource Mfg., Broken Arrow, OK
Responsible to train all new employees within the Assembly Department. As well,
responsible to build all the new John Deere Viper doors, Komatsu tractor service doors
and Case tractor service doors. Also, I inspect all parts received, all products shipping
out, maintain company inventory, keep track of reject parts while maintaining an ISO
2000 system, responsible for daily paperwork regarding production and inspection, and
communicating with engineering on corrective needs due to print irregularities.
Mechanical Assembler/Q.C. Inspector (6/2007 - 2/2009)
Natural Gas Services Group, Inc, Catoosa, OK
Build, tube, inspect, and test run natural gas, propane, and sour gas compressors.
Inspect all crankshafts, parts needed for job, and completed units. Use of micrometers,
calipers, bore gauge, overhead crane and forklift. Inspect and hydro test cylinders to

3. test pressure. Help out at main shop building with putting everything on the skids. Use
of a welder and overhead crane. Routine maintenance, also immediate maintenance,
performed on forklift, overhead crane, shop equipment, and power tools.
Tuberoller/Hydro Tech/Q.C. Inspector (10/2005 - 2/2007)
AXH air coolers, Claremore, OK
Inspect tubes and unit for non-conformability, insert tubes into unit, set tubes, roll
tubes, put flanges and bolts on unit, and finally hydro unit to pressure then drain.
Inspect units after completion. Use of a cutting torch, overhead crane, and forklift.
Technician/Q.C. Inspector (10/2003 - 7/2005)
Whirlpool, Tulsa, OK
Work in fabrication press lines(inspect parts as they come off of press line), finish
department (which consisted of transferring bare metal parts onto conver line through
paint and furnace, then to holding area, also inspect parts throughout the process),
assembly line (which consisted of putting together free standing oven range, also
inspecting parts throughout process), and north dock (which consisted of using a tugger
or a forklift and moving vital material to assembly lines or dealing with
shipping/receiving, inspect material going to assembly lines). Perform routine
maintenance, also immediate maintenance, on forklifts and press lines.
Grinder/Q.C. Inspector (7/2001 - 1/2002)
Pattison Precision Products, Broken Arrow, OK
Debur, sand parts in timesaver, punch press parts, use brake after setup, use forklift,
use shear, and help in assembly of flight simulator parts. Inspect all parts before
starting and after completion.
Computer Aided Drafter (9/2000 - 6/2001)
TDI, Broken Arrow, OK
Create prints for Hemphill tower sites, Fintube and Caterpillar drawings, and any needed
for the shop, TMI. Also work in shop when help was needed with cutting saw, assembly,
shipping/receiving, mill/lathe/drill press, and with welders. Use of a cutting torch, mig
welder, and forklift.
Computer Aided Drafter (5/1999 - 9/1999)
SWP Consultants, LLC, Tulsa, OK
Create prints for fiber optic cable, buried gas and electric lines, and telephone lines.
Used AutoCAD and image interfacing software. Laid off due to loss of contracts.
EDUCATION
College
Tulsa Community College
Tulsa, OK
Tri-County Tech
Bartlesville, OK

4. Central Tech
Drumright, OK
ADDITIONAL QUALIFICATIONS
Certifications and Licenses n/a
REFERENCES
Available upon request.