1. Curriculum Vitae
KRISHNA NARAYANAN
nkrishna.dme@gmail.com
0091-7708492499
Personal Details:
Date of Birth : 18th of June1987
Nationality : Indian
Marital status : Married
Passport No : G 5022674
Place of Issue : Tiruchirappalli, India.
Issued Date : 22.09.2007
Expiry Date : 21.09.2017
Driving License No : F/TN/49Z/004156/2007
Languages : English, Tamil, Telugu. Malayalam, Hindi
Professional Qualifications:
Diploma in Mechanical Engineering from Government of Tamil Nadu, India
CSWIP 3.1 - WELDING INSPECTOR-61109
PCN 3.2 Ultrasonic Testing-Cert No : 323691
NON DESTRUCTIVE TESTING (ASNT) Level II as per SNT – TC-1A in(PT,MT,RT,UT)
B-GAS Gr.-2 Approved Painting Inspector Certified by TWI.
Employment Details:
JGC CORPORATIONBARZAN ONSHORE PROJECT QATAR RASLAFAN FROM JULY2013
TO TILL DATE AS A WELDING AND PAINTING INSPECTOR (CLIENT: RAS GAS)
 Verification of isometric dawning with respect to P&ID
 Reviewing the approved quality plans, manuals and scope of work to perform the required
inspection.
 Coordinating with client/consultants while the inspection is being carried out and offer any
clarification is required.
 Surveillance and monitoring of piping, structural, welding and all other activities both on fabrication
shop and work site.

2.  Coordinate with the Engineering Department regarding design modification encountered during final
inspection
 Assist client representative for company auditing concerning quality matters.
 Witness hydrostatic pressure / leak test, pneumatic test, flushing and make sure that all NDE
requirements are done prior to start of test
 Reviewing PWHT Reports / Chart. and Reviewing Radiography Films
 Assisting in preparation of Quality Control Procedures (QCP) and Inspection Test. Plan (ITP
pertaining to welding / Mechanical activities.
MAIRE TECNIMONT HABSHAN -5 GAS (INTEGRATED GAS DEVELOPMENT PROJECT,
ABU DHABI) FROM APRIL2012 TO MAY 2013 (CLIENT: GASCO) Preparation & monitoring of
quality control plan, procedure, work instructions and method statement. Ensure all activities are carried
out as per approved system and procedure
 Offshore - sub sea pipeline welding, painting and field joint coating inspection. NDT monitor and
RT film interpretation and certification.
 Inspection of incoming materials identification, visual and consumable verification. In-process
welding inspection, visual, dimensional checking and report preparation
 NDT spool clearance, back filling clearance and witnessing of hydro test and pneumatic as per
system requirement
 Review of Isometric Drawings & ensure Approved WPS as well as Qualified welders are available.
 Review of test pack documentations Documentation
 preparing weekly inventory of paint & consumables and order for the materials responsible for the
preparation of all documentation work pertaining to site activity to the company management.
 Carry out daily painting inspection and surveillance check including required blast and paint test and
acceptance for various structures such as jackets, decks, bridges, pipe spools, pressure vessels etc.
 Surveillance and monitoring of piping, structural, welding and all other activities both on fabrication
shop and work site.
 Interpret/Review NDT reports and maintain all related file and records
 Witness hydrostatic pressure / leak test, pneumatic test, flushing and make sure that all NDE
requirements are done prior to start of test.
 Updating of the Isometric Drawings in according to Services and Site Conditions.
 Inspecting both auto and manually blasted Surface as per specification, inspection like Visual,
Profile Measurement, Salt Contamination, Dust Level, Acid cleaning, etc.
 Inspecting the Coating application of coatings like Zinc Silicate, Epoxy based paints,
 Inspecting the Coated component visually for any surface defects and ensuring the DFT obtained is
within the acceptable limit as per the specification/ manufacturer data sheet.
TECHNIP ITALY PROJECT PACKAGE 5A INTERCONNECTING FLARE PCS &
ELECTRICAL SYSTEMS IN JUBAIL FEBRUARY 2010 TO JANUARY 2012 AS A
WELDING AND PAITUNG INSPECTOR (SATORP APPROVED). ( CLIENT:SATORP)

3.  Inspection of the Pre Heating, Inter pass Temperature and Post Weld heat Treatment.
 Visual and Gauge inspection in fit-up’s before and after welding.
 Conduct WQT(welder qualification test) as per Welding Procedure Specification (WPS).
 To monitor welders to ensure all welding works are carried out as per Approved WPS and
Requirements.
 Monitor and maintain control records for welding consumable and welder performance record.
 Works involved coordination with client and subcontractor inspector for day-to-day QA/QC
activities, and inspection of welding and painting works .
 Witnessing of painting and blasting materials as per standards or client specification
 Reviewing Incoming materials test certificates of Paint materials, Blasting materials.
 Witnessing of painting and blasting materials as per standards or client specification
 Inspecting the Coated component visually for any surface defects and ensuring the DFT obtained is
within the acceptable limit as per the specification/ manufacturer data sheet
 Ensuring the handling of coated pipes, plates, vessels are in safe and proper way to minimize the
damages on coating as well as the persons who are in handling operations
JGC ARABIA NATIONAL CHEVRON PHILLIPS NORTH PLOT PROJECT FROM APRIL
2010 TO SEPTEMBER 2011 AS WELDING AND PAINTING INSPECTOR.( CLIENT: NCP)
 Preparation & monitoring of quality control plan, procedure, work instructions and method
statement. Ensure all activities are carried out as per approved system and procedure.
 Works involved fabrication and inspection of process and power piping, structural steel work and
job order review and incoming raw materials inspection, welding inspection
 Co-ordinate with client inspector PWHT activities, radiography film interpretation. Preparation and
final submission of test pack as per client requirement
 Checking the Essential Parameters as per the W.P.S Requirements and Quality Procedures.
 Inspection of hydro test activities. Co-ordination with NDT activities and interpretation of
radiography film. Test packs preparation, review and documentation cladding / insulation
 Preparing the as built for Final Modification according to Site Conditions.Final Clearance for Hydro
Test Packages.
 Handled welding process like GTAW, SMAW & SAW as per international codes and standards such
as ASME II, ASME V, ASME IX , ASME B31.3, 31.1
Declaration:
I hereby declare that all the details mentioned above are true to the best of my knowledge.
DATE:
SIGANATURE,
PLACE:
(KRISHNA.N)