M. Murugan is seeking a job opportunity. He has over 9 years of experience in production roles in the electronics industry. He currently works as a Shift Leader at Hyundai Mobis India Pvt Ltd in Chennai, where he is responsible for meeting production targets and quality standards. Previously he has worked at Nokia India Pvt Ltd and Flextronics Technologies Pvt Ltd in supervisory roles overseeing assembly lines. He holds a B.Tech degree in Electronics and Telecommunication.
A responsible carrier opportunity in Plastics Technology, to secure a position as a plastics engineer in a plastic industry and support the company by importing my knowledge in plastic manufacturing operations including product development, plastics processing, project management, equipment selection, and tooling selection.
Professional resume for Tom Randall Manufacturing Leader, Director of manufacturing, Director of Operations, Plant Manager, Operations Manager, Director of Quality Assurance.
A responsible carrier opportunity in Plastics Technology, to secure a position as a plastics engineer in a plastic industry and support the company by importing my knowledge in plastic manufacturing operations including product development, plastics processing, project management, equipment selection, and tooling selection.
Professional resume for Tom Randall Manufacturing Leader, Director of manufacturing, Director of Operations, Plant Manager, Operations Manager, Director of Quality Assurance.
Para otros usos de este término, véase Fundición (desambiguación).
Colado del metal fundido.
Se denomina fundición o esmelter (del inglés smelter, ‘fundidor’) al proceso de fabricación de piezas, comúnmente metálicas pero también de plástico, consistente en fundir un material e introducirlo en una cavidad (vaciado, moldeado), llamada molde, donde se solidifica.
El proceso más común es la fundición en arena, por ser ésta un material refractario muy abundante en la naturaleza y que, mezclada con arcilla, adquiere cohesión y moldeabilidad sin perder la permeabilidad que posibilita evacuar los gases del molde al tiempo que se vierte el metal fundido. La fundición en arena consiste en colar un metal fundido, típicamente aleaciones de hierro, acero, bronce, latón y otros, en un molde de arena, dejarlo solidificar y posteriormente romper el molde para extraer la pieza fundida (pero ya sólida).
Para la fundición con metales como el hierro o el plomo, que son significativamente más pesados que el molde de arena, la caja de moldeo es a menudo cubierta con una chapa gruesa para prevenir un problema conocido como "flotación del molde", que ocurre cuando la presión del metal empuja la arena por encima de la cavidad del molde, causando que el proceso no se lleve a cabo de forma satisfactoria.
También se conoce como fundición al proceso de extraer metales a partir de sus menas, que suele ser la etapa previa al moldeado metálico (véase Fundición (metalurgia))
Directs and coordinates activities of workers engaged in repair, maintenance, and installation of machines, tools, and equipment, and in maintenance of buildings, grounds, and utility systems of Strong Industries by performing the following duties personally or through subordinates.
1. M.MURUGAN
Email: Muruganmm123@gmail.com,
Contact. No.:
(Mob): +91 9791183978
Address for Communication:
No.3A , 2nd Street,
Periyar nagar,Adambakkam,
Chennai-600088,
Tamilnadu
Personal Data
Father name: M. Mahalingam
Sex: Male
DOB: 07.06.1985
Nationality: Indian
Marital Status: Married
Children: One Male Child
Languages Known:
English, Tamil.
Passport Details
Passport no : E0714270
Date of issue : 22/01/2004
Date of expiry : 21/01/2016
Place of issue : Chennai
Objective
To improve the organizational productivity through systematic
Analytical & Process engineering method with Team work, Dedication,
Initiative, Innovation and Problem Solving manner.
Summary of Experience
9 years of experience in field of Production industry.
Worked in various roles as Production supervisor & Analytical
skill in mobile technology and electronic Panels & involved in
setup of Diagnostics.
New products ramp-up and Stabilization.
Strength
Capable of Managing SMT production & Assembly Lines End-to-
End
Ability to analyze complex situations and Problem solving skills.
Promote Team working in an open and communicating
environment, Equal opportunities recognizing the need to develop
and encourage team members.
Good verbal and written communication skills as well as
presentation and negotiation skills.
Able to select, train and motivate constructively. Ability to think
on Short, Medium and long-term requirements.
Energetic and innovative team player / Builder, can work in high
stress
Education
Completed B.Tech (Electronics & Telecommunication) at KSOU
D.E.C.E (Diploma in Electronics & communication Engg)
S.V.P.T Collage Villupuram (2002 to 2004).
H.S.C Passed in First Class from State board (2002)
S.S.L.C Passed in First Class from State board (2000)
2. Experience Details
4. Company name : Hyundai Mobis India Pvt Ltd, sriperumbudur, Chennai.
Period : From Jun 2014 to till date.
3. Designation : Working as a Shift Leader (Junior Executive) in Audio Assembly Unit.
Nature of job:
Check the material, Packing Bin & SMD Board Availability for as per HMI plan
Achieve Daily and monthly production targets
Ensure completion of Production Targets and manage balance between demand and supply
Analyze the man & Machine related issue and take the Permanent action
Responsible for achieving Maintain with100% OTD and Zero Defects.
Maintain 5’s, Safety Environment &ESD awareness in shop floor.
Responsible for material availability in lines and to next work order
Hourly output monitoring and communication give to superior
Check the solder pallet cleaning condition
Operator Performance monitoring
Equipment down time monitoring
New Project & Process Training and prepare the document
OJT Training & Document preparation
Daily Production & down time data preparation for MD meeting
Daily down time entire and verify the EIS system
EOHS document preparation and Risk analyzes hazards disposal
Daily audit the 3C & 5S and scoring system
Attending the Monthly performance Team Meeting
New Model & New process monitoring
Daily highlight the incoming rejection to IQC Team
Daily organize the meeting with supporting team(PQIT,PE, IQC, OQC, Material) for reduce
the Rejection &Down time
Daily verify the all the Check sheet and all the tool torque
Daily Cross Verify the MES and SAP system
New product introduction:
Understanding the customer specifications and company standards and, verifying the same
in the finished product.
Verify and confirm the Part Number with BOM of the product before it goes for line loading.
Preparation of line requirement check sheet for new products.
Work Order Release & Follow up the Production Team to achieve the planned numbers on every
day.
Achievements:
Audio assembly line Cycle time reduced from 60 sec to 51.3 sec
(Productivity UPH improved 60 to 70)
Consumable cost reduction INR 5laks in 2014
Reduce the Model change over time in Wave solder Machine.
DOL Certified EOHS internal auditor
3. Company name : Nokia India Pvt Ltd, sriperumbudur, Chennai.
Period : From Jun 2009 to May 2014.
4. Designation : Working as a Shift Supervisor (Line Team Leader) in SMT Production
& Assembly Unit.
Nature of job:
Manage and monitor production line daily work & Ensure production line accomplish
production plan timely.
To Facilitate continues improvement activities like Kaizen, Projects, Training and
motivation of Team members.
Performance Monitoring & Appraisal of production Team Member.
Attending the CFT (Cross functional Team ) Meeting to resolve the quality issue.
Efficient utilization of the resources like Manpower, Material & Equipment.
Evaluate rework quality & 5s in work area through regular audits
Evaluate skill matrix for Operators & Responsible for on job training.
To Analyze Corrective action and Preventive action.
Production line 5S, ESD, principle monitor and management & Improve and Sustain Systems
(QMS & EHS) requirements.
MFR /OEE and production abnormal problem handle, feedback and follow up
Production line material management & scrap cost control and improvement
New comer training arrangement and follow up & Conduct operator performance evaluation.
Monitoring and updating Attendance of employee using KRONOS.
To prepare standard operating procedure & Work instruction in co-ordination with Technical
training group.
Equipment handling:
DEK Solder paste printing machine.
Fuji-NXT M3S, M2 component Pick and place machine..
Automatic Optical Inspection ( Agilent Technologies)
ERSA (2/14 and 3/20 Hot flow) Reflow and Curing Machine
Achievements:
Project done on Avoiding Archie H9300 camera missing and misalign.
Project done on Avoiding WANA Pad damage and PWBA scrap
Project done on Reduction of PWBA Scrap in Coral model.
2. Company name : Flextronics Technologies Pvt (Ltd), Chennai.
Period : Jul 2007 -Jan 2009
5. Designation : Technician (SMT & Assembly Line)
Nature of job:
Ensures daily entries of all critical data like production output, downtime, performance
tracking, and back flush are done in a consistent accurate manner
Directs and guides team members the effective way of leading production operators on
their activities based on the plan targeted by the production.
Root cause analysis of the machines which have been scrapped and giving solutions to avoid
further scrap.
Ensure the availability of materials for plan.
Work load allocation & balancing on assembly area.
Achieve the production target as per plan.
Hourly defect monitoring in machine area.
Making corrective action report for internal quality problem.
Monitor quality of product during manufacturing.
Monitoring the man, machine, material utilization.
Preparation of work Instruction along with process Engineer
Continuous improvement activities along with team members.
Productivity improvements and achieving monthly target.
Implementation of 5S in all working area
1. Company Name : LUCAS_TVS Pvt (Ltd), Pondicherry.
Period : June 2004 to June 2005
Designation : Production Trainee
Nature of job:
Ensure the availability of materials for plan
Achieve the production target as per plan.
Continuous improvement activities along with team members.
Implementation of 5S in all working area
Hourly defect monitoring in machine area.
Declaration:
I hereby declare that the above mentioned particulars are true and
Correct to the best of my knowledge and belief.
Place: Chennai yours truly,
Date: M.Murugan
6. Designation : Technician (SMT & Assembly Line)
Nature of job:
Ensures daily entries of all critical data like production output, downtime, performance
tracking, and back flush are done in a consistent accurate manner
Directs and guides team members the effective way of leading production operators on
their activities based on the plan targeted by the production.
Root cause analysis of the machines which have been scrapped and giving solutions to avoid
further scrap.
Ensure the availability of materials for plan.
Work load allocation & balancing on assembly area.
Achieve the production target as per plan.
Hourly defect monitoring in machine area.
Making corrective action report for internal quality problem.
Monitor quality of product during manufacturing.
Monitoring the man, machine, material utilization.
Preparation of work Instruction along with process Engineer
Continuous improvement activities along with team members.
Productivity improvements and achieving monthly target.
Implementation of 5S in all working area
1. Company Name : LUCAS_TVS Pvt (Ltd), Pondicherry.
Period : June 2004 to June 2005
Designation : Production Trainee
Nature of job:
Ensure the availability of materials for plan
Achieve the production target as per plan.
Continuous improvement activities along with team members.
Implementation of 5S in all working area
Hourly defect monitoring in machine area.
Declaration:
I hereby declare that the above mentioned particulars are true and
Correct to the best of my knowledge and belief.
Place: Chennai yours truly,
Date: M.Murugan