This document is a resume for Fehri Ahmed, a production engineer from Tunisia. It summarizes his educational and professional background. He has a diploma in electro-mechanical engineering and over 10 years of experience in maintenance and production engineering for oil and gas companies. He has specialized skills in artificial lift design, reservoir modeling, and production optimization.

1. Page 1 of 3
FEHRI Ahmed
Road of Tunis, 4.5 km, Sfax
Post office box: N° 115 – Le grand Maghreb – 3049 Sfax
Tunisia
È(+216) 99 797 177
(+216) 58 428 074
šafehri@tps.com.tn / ahmedelfehri@yahoo.fr
Production Engineer
STUDIES
Ø June 2008: ENIS – National School of Engineers of Sfax
Electro - mechanical Engineer diploma
Ø June 2005: IPEIS – Preparatory Institute for Engineering studies of Sfax
Qualification for the Engineering Studies (Specialty: Physics – Chemistry)
Ø June 2003: Secondary school (Hedi Chaker, Sfax)
Baccalaureate diploma (Specialty: mathematics)
PROFESSIONAL EXPERIENCE
Maintenance Engineering
v From August 2008 to August 2009:
§ Maintenance Engineer at CFTP (Franco - Tunisian Company of oils): Exploration &
Production Company (Joint Venture between Tunisian government “ETAP” & SPYKER
ENERGY)
Petroleum Production Engineering
v From September 2009 to March 2013:
§ Production Engineer at CFTP (Companie Franco – Tunisienne des Pétroles): Exploration &
Production Company (Joint Venture between Tunisian government “ETAP” & SPYKER
ENERGY)
v Since April 2013:
§ Production Engineer at TPS (Thyna Petroleum Services): Exploration & Production
Company (Joint Venture between ETAP & OMV)

2. Page 2 of 3
Teaching Experience
v Since 2014:
§ Instructor at IPSAS (Institut polytechnique de sciences avancées à Sfax): Petroleum
Engineering branch
Topic: Artificial Lift by Pumping: ESP & SRP
PROFESSIONAL TRAININGS & COURSES
April 2011 at IFP (Institut Français du Pétrole): Reservoir Management training
Training with Wood-Group: ESP installation and cable splicing.
Training with Schlumberger: PIPESIM software
Training with Baker Hughes: AutographPC software
June 2014 at IFP: Oil & Gas Field Processing
Training with SSW: First emergency aid
June 2013: Training with Anglo-Australian Communications (AAC): Presenting for Professionals
Training with IIFEE: MS Project
Training with ADVANCIA: Excel 2010 “High level”
SKILLS
Production Engineer
o Production monitoring and optimization
o Wellbore modeling using nodal analysis software for production optimization
§ PROSPER (Petroleum Expert)
§ PIPESIM 2009 (Schlumberger)
§ DesignRite 7.1.0 (Schlumberger)
§ AuographPC (Baker Hughes)
§ Solutions 3.1 (GE Oil & Gas)
§ ECHOMETER QRod2.4 (QRod: Only for sucker rod pumps)
o Good understanding of the reservoir behavior and its phenomena
o Very good understanding and large knowledge in physics, hydraulics, mechanics and electricity
(Background: Electro-mechanical Engineering) that allows the control of: Inflow, outflow, artificial
lift technologies and surface flow assurance…
o Very good command of artificial lift design and well modeling software: PROSPER (Petroleum
Expert), AuographPC (Baker Hughes), Solutions 3.1 (GE Oil & Gas), DesignRite 7.1.0
(Schlumberger), PIPESIM 2009 (Schlumberger), ECHOMETER QRod2.4 (QRod: Only for sucker
rod pumps)
o ESP, Sucker Rod Pump, PCP, Jet pump and Gas lift: Design & troubleshooting
o Large experience with ESP & Sucker rod: Very good understanding and strong background
o Artificial lift systems tendering: Preparation of call for tenders and tenders evaluation
o Flow assurance: Surface Network modeling and optimization
o Very good command of surface network modeling software: PIPESIM 2009 (Schlumberger), GAP
(Petroleum Expert)
o Selection and optimization of the artificial lift systems
o Artificial lift technologies (ESP, Sucker rod, Gas lift, PCP…): performance evaluation

3. Page 3 of 3
o Experience with sour gas (H2S/CO2)
o Field experience
o Experience in Onshore & Offshore fields
o Reserve evaluation using decline curves (log10 (Fo) Vs Np)
o Production planning, forecasts
o Well completion design (sweet and sour environment)
o Supporting the well interventions (Work Overs, acidizing, logging…)
o Supporting the preparation of OPEX & CAPEX: planning and forecasts
ACHIEVEMENTS
Production Engineering:
- Troubleshooting, root cause identification and remedial job proposal: “Proved interpretation”
· SIT18: Well was activated by ESP. Casing leak.
· SIT34: Well was activated by sucker rod pump. Build-up of skin (Plugged perforations).
· CER1: Well was activated by ESP. pump gas lock.
· CER6AS: Well activated by ESP. Coming of viscous fluid
· GUE5A: Well activated by ESP. Plugging in the casing below the pump (above the
permanent packer) causing the production parameters instability
· GUE5A: Well activated by ESP. Circulation (Leak in the tubing string)
· GUE12: New drilled well, activated by ESP. Viscous deposits in the casing and sucked by the
pump…
- Creation of booklet describing the wells state and evaluating the remaining reserves (decline curves:
log10 (Fo) Vs Np). It contains all well completions, remaining reserves and interesting geological
layers
- Production Optimization study: Review of the installed artificial lift technologies and their production
parameters and identification of the wells requiring the used technology replacement. “Study was
checked and approved by expert”
- Wells modeling: ESP & SRP design (Using: Hand calculation, PROSPER, DesignRite, Solutions, AutographPC,
ECHOMETER QRod, and PIPESIM)
- Surface Network modeling and optimization (Using PIPESIM software)
- Replacement of CERCINA expedition pumps (offshore field): Network modeling & installation
design (Used pump was TRIPLEX / the new one is PCP pump)
- Preparation of ESP’s call for tenders: Preparation of the scope of work and tenders evaluation (Scope
of Work, evaluation strategy and tender evaluation)
- Participation to the PtL (Produce the limit) sessions
- ESP stock optimization by ESP sets standardization (Use of the minimum ESP sets for the maximum number
of wells)
LANGUAGES & SOFTWARE
Languages: Arabic, French, English: fluent
Production Engineering Software: Petroleum Experts IPM 7.5 (PROSPER, GAP), PIPESIM 2009,
AutographPC (Baker Hughes), Solutions 3.1 (GE Oil & Gas), DesignRite 7.1.0 (Schlumberger),
ECHOMETER QRod2.4
Maintenance Management Software: AQ Manager (GMAO)
Computer: MS project, Microsoft Office…