This document is a technical plan for the electrical installation of a warehouse. It includes a cover page with project information, a one line electrical diagram of the power distribution, and specifications for the electrical cables including allowed tolerances and parameters for cable size calculations. Sections provide details on the cable types, sizes, and lengths running from the main electrical panel to various areas and equipment within the warehouse.
PFE Réalisation d’un onduleur monophasé autonome commandé par PIC 16F877RAMZI EL IDRISSI
Réalisé par :
EL IDRISSI Ramzi
SEMLALI Amine
AGHMADI Ahmed
Filiére :
Génie Industriel & Energies Renouvelables ( l'école supérieure de technologie de Berrechid )
Rapport Stage PFE Bureau D'étude Electricité : ÉTUDE DE L’INSTALLATION ÉLECTR...SadokZgolli
This document is a project report for the electrical installation of a school complex located in Saint Georges de l'Oyapock, France. The complex includes a high school and middle school buildings. The report provides background information on the project scope and site plan. It also describes the required work, which includes a technical study of the lighting system and electrical installation for both low and high voltage. Calculation examples are provided for determining the lighting levels, cable sizes, short circuit currents and protection device ratings. The report aims to size the electrical installation appropriately and in compliance with relevant standards and regulations.
Transformers Tunisia SA, ISO 9001 and Partner Program Upgrade is a leading manufacturer of distribution transformers MV / MV, MT/BT- BT / BT Single and three phase poles in the cabin and immersed in oil or resin.
Maintenance and repair of transformers in our factory and sites instalation
* Processing and transformer oil testing
contater 0021621730007
email: rostom.laribi@voila.fr
2022-RAPPORT DE PROJET FIN D'ETUDE-REHOUMA BASSEM.pdfBassamRhouma
Rapport Stage PFE Bureau D'étude Electricité : ÉTUDE DE L’INSTALLATION ÉLECTRIQUE DE 3 IMMEUBLES DE LOGEMENT,UN HOTEL ET UN PARC DE STATIONNEMENTS BASÉ à PARIS, FRANCE
PFE Réalisation d’un onduleur monophasé autonome commandé par PIC 16F877RAMZI EL IDRISSI
Réalisé par :
EL IDRISSI Ramzi
SEMLALI Amine
AGHMADI Ahmed
Filiére :
Génie Industriel & Energies Renouvelables ( l'école supérieure de technologie de Berrechid )
Rapport Stage PFE Bureau D'étude Electricité : ÉTUDE DE L’INSTALLATION ÉLECTR...SadokZgolli
This document is a project report for the electrical installation of a school complex located in Saint Georges de l'Oyapock, France. The complex includes a high school and middle school buildings. The report provides background information on the project scope and site plan. It also describes the required work, which includes a technical study of the lighting system and electrical installation for both low and high voltage. Calculation examples are provided for determining the lighting levels, cable sizes, short circuit currents and protection device ratings. The report aims to size the electrical installation appropriately and in compliance with relevant standards and regulations.
Transformers Tunisia SA, ISO 9001 and Partner Program Upgrade is a leading manufacturer of distribution transformers MV / MV, MT/BT- BT / BT Single and three phase poles in the cabin and immersed in oil or resin.
Maintenance and repair of transformers in our factory and sites instalation
* Processing and transformer oil testing
contater 0021621730007
email: rostom.laribi@voila.fr
2022-RAPPORT DE PROJET FIN D'ETUDE-REHOUMA BASSEM.pdfBassamRhouma
Rapport Stage PFE Bureau D'étude Electricité : ÉTUDE DE L’INSTALLATION ÉLECTRIQUE DE 3 IMMEUBLES DE LOGEMENT,UN HOTEL ET UN PARC DE STATIONNEMENTS BASÉ à PARIS, FRANCE
Rapport de stage fin d'étude 6ème année secondaire
Page de garde,
conclusion
introduction
remerciement
problème rencontrée au et les solution trouvée l'entreprise
relation au sein de l'entrepise
situation géographique de stage
description de lieu de stage
description de tâche effectuée
presentation de l'entreprise
les resultats obtenus rapport de stage
une organigramme
organigramme rapport de stage
Etude d'installation électrique et réalisation de l'armoire électrique TGBTSadokZgolli
Etude d'installation d'éclairage, prise de courants, dimensionnement de circuits et réalisation pratique d'un TGBT du restaurant KFC rapport et annexe
Contact :
https://www.linkedin.com/in/sadok-zgolli/
zgollisadok@yahoo.com
Thèse Master Mr. AMRANE Fayssal 2012 (University Ferhat Abbas Setif-1)Amrane _Faysl
Ce travail présente une étude de trois types d’onduleur à Résonance ; série, parallèle et à injection. D’après une étude comparative faite entre les deux premiers types (Série et parallèle), on a choisi la topologie série parce qu’elle apporte les avantages de la simplicité et de point de vue circuiterie et commande.
Dans le cadre de ce travail nous avons réalisé la partie puissance et le circuit de commande de cette topologie. L’implantation de de cette pratique est effectuée avec le système et interfacé avec un Pc, dont la communication entre le système et le PC se fait via une carte d’acquisition de type DSP (carte Dspace1104), et en utilisant les environnements Logiciels Matlab/Simulink et control Desk.
D’après une étude en simulation et une étude expérimentale faites sur la topologie série, nous avons constaté qu’une bonne concordance entre les résultats de simulation et ceux expérimentaux.
Mots Clés : Onduleur à Résonance, Commande MLI, Chauffage par induction.
Etude et analyse de la commande des onduleurs Multi-niveaux par MLI sinusoïdaleabdelghani1993
Ce présent travail est une contribution à l’analyse des onduleurs multi-niveaux alimentent une machine asynchrone et une présentation de la commande de Modulation en Largeur d'Impulsion Sinusoïdale, a pour objectif de réduire les harmoniques, donc l’obtention d’une tension (ou un courant) sinusoïdale à la sortie de ces convertisseurs et d’améliorer les performances de la machine. Pour cela on va traiter ce travail sur deux axes le premier sur l’utilisation des topologies multi-niveaux de l’onduleur, et le seconde porte sur les techniques de l’ouverture et de la fermeture des semi-conducteurs (Transistors) qui formant l’onduleur. Donc, le système étudié dans notre travail, se compose d’un onduleur triphasé à trois niveaux de tension de type NPC commandé par MLI sinusoïdale (Sinusoïdal Pulse with Modulation). Pour aboutir à cette fin nous comptons de développer un algorithme de commande de l’onduleur basé sur cette technique de modulation.
Exercice corrigé : ETUDE D'UNE INSTALLATION SOLAIRE RAMZI EL IDRISSI
Une exploitation agricole isolée, non raccordée au réseau, produit l'énergie électrique dont elle a besoin à l'aide d'une installation solaire photovoltaïque.
This document provides instructions for operating a bushing test tap. It discusses:
- The general design of the test tap, which allows access to a control layer insulated from the flange.
- The purposes of the test tap, which include measuring capacitance C1 and loss factor tan δ, as well as permanent voltage measurements or partial discharge monitoring at up to 1.5kV.
- Connection procedures for capacitance and power factor measurements or permanent measurements using a plug coupler and shielded cable.
- Insulation tests are done at 3kV for 1 minute during routine bushing testing according to IEC 60137.
Original Mosfet N 8N80C 8N80 FQPF8N80C FQPF8N80 8A 800V TO-220 New FairchildAUTHELECTRONIC
Original Mosfet N 8N80C 8N80 FQPF8N80C FQPF8N80 8A 800V TO-220 New Fairchild
https://authelectronic.com/original-mosfet-n-8n80c-8n80-fqpf8n80c-fqpf8n80-8a-800v-to-220-new
Rapport de stage fin d'étude 6ème année secondaire
Page de garde,
conclusion
introduction
remerciement
problème rencontrée au et les solution trouvée l'entreprise
relation au sein de l'entrepise
situation géographique de stage
description de lieu de stage
description de tâche effectuée
presentation de l'entreprise
les resultats obtenus rapport de stage
une organigramme
organigramme rapport de stage
Etude d'installation électrique et réalisation de l'armoire électrique TGBTSadokZgolli
Etude d'installation d'éclairage, prise de courants, dimensionnement de circuits et réalisation pratique d'un TGBT du restaurant KFC rapport et annexe
Contact :
https://www.linkedin.com/in/sadok-zgolli/
zgollisadok@yahoo.com
Thèse Master Mr. AMRANE Fayssal 2012 (University Ferhat Abbas Setif-1)Amrane _Faysl
Ce travail présente une étude de trois types d’onduleur à Résonance ; série, parallèle et à injection. D’après une étude comparative faite entre les deux premiers types (Série et parallèle), on a choisi la topologie série parce qu’elle apporte les avantages de la simplicité et de point de vue circuiterie et commande.
Dans le cadre de ce travail nous avons réalisé la partie puissance et le circuit de commande de cette topologie. L’implantation de de cette pratique est effectuée avec le système et interfacé avec un Pc, dont la communication entre le système et le PC se fait via une carte d’acquisition de type DSP (carte Dspace1104), et en utilisant les environnements Logiciels Matlab/Simulink et control Desk.
D’après une étude en simulation et une étude expérimentale faites sur la topologie série, nous avons constaté qu’une bonne concordance entre les résultats de simulation et ceux expérimentaux.
Mots Clés : Onduleur à Résonance, Commande MLI, Chauffage par induction.
Etude et analyse de la commande des onduleurs Multi-niveaux par MLI sinusoïdaleabdelghani1993
Ce présent travail est une contribution à l’analyse des onduleurs multi-niveaux alimentent une machine asynchrone et une présentation de la commande de Modulation en Largeur d'Impulsion Sinusoïdale, a pour objectif de réduire les harmoniques, donc l’obtention d’une tension (ou un courant) sinusoïdale à la sortie de ces convertisseurs et d’améliorer les performances de la machine. Pour cela on va traiter ce travail sur deux axes le premier sur l’utilisation des topologies multi-niveaux de l’onduleur, et le seconde porte sur les techniques de l’ouverture et de la fermeture des semi-conducteurs (Transistors) qui formant l’onduleur. Donc, le système étudié dans notre travail, se compose d’un onduleur triphasé à trois niveaux de tension de type NPC commandé par MLI sinusoïdale (Sinusoïdal Pulse with Modulation). Pour aboutir à cette fin nous comptons de développer un algorithme de commande de l’onduleur basé sur cette technique de modulation.
Exercice corrigé : ETUDE D'UNE INSTALLATION SOLAIRE RAMZI EL IDRISSI
Une exploitation agricole isolée, non raccordée au réseau, produit l'énergie électrique dont elle a besoin à l'aide d'une installation solaire photovoltaïque.
This document provides instructions for operating a bushing test tap. It discusses:
- The general design of the test tap, which allows access to a control layer insulated from the flange.
- The purposes of the test tap, which include measuring capacitance C1 and loss factor tan δ, as well as permanent voltage measurements or partial discharge monitoring at up to 1.5kV.
- Connection procedures for capacitance and power factor measurements or permanent measurements using a plug coupler and shielded cable.
- Insulation tests are done at 3kV for 1 minute during routine bushing testing according to IEC 60137.
Original Mosfet N 8N80C 8N80 FQPF8N80C FQPF8N80 8A 800V TO-220 New FairchildAUTHELECTRONIC
Original Mosfet N 8N80C 8N80 FQPF8N80C FQPF8N80 8A 800V TO-220 New Fairchild
https://authelectronic.com/original-mosfet-n-8n80c-8n80-fqpf8n80c-fqpf8n80-8a-800v-to-220-new
This document discusses a temperature controller called the Sleek 92 series that provides accurate temperature measurement and control. It is a microcontroller-based programmable temperature indicator and controller that accepts various temperature sensor inputs and displays the temperature digitally. It features reliable electronic components, immunity to vibrations, long-distance readability, and accurate temperature control through proportional control logic and relay output. The Sleek 92 series can be used in various industries and applications requiring accurate temperature control and measurement.
Looking Temperature Controller? ESD India manufactures high quality temperature Controller, instruments. Contact us and quote for temperature Controllernow!
The document provides instructions for installing, using, and commissioning a Sepam 2000 HV/MV substation protection and control device. It includes details on equipment identification, assembly, wiring connections for current and voltage inputs, power supply, communication options, and setting microswitches. Accessories that are supplied and optional accessories are also described.
Itron cf echo ii ultrasonic heat meter brochure - englishThorne & Derrick UK
The CF ECHO II is Itron's compact ultrasonic heat and cooling meter that measures flows from 0.6 to 15 m3/h with high accuracy. It features an advanced multifunctional display, communication capabilities, and optional modules for water metering and power supply. The meter complies with European standards and provides functions for data logging, billing, and network management.
This document provides information about a boost converter circuit project including a list of documents, designation of components, images of key components, and simulation results. It lists 17 components used in the boost converter circuit including capacitors, diodes, an inductor, voltage regulator, resistors, transistor, and integrated circuit. It also includes figures of the circuit schematic used for simulation and results of the simulation.
This document provides a wiring diagram for the Calisto T1 device. It details the various components, connections, and terminals. Key elements include:
- Incoming AC power supply of 100-240V feeding the power supply unit.
- 24V DC power outputs to components like relays, optional network switch, and LED tower.
- Connections for bushing sensors, voltage inputs, and dry contacts for system alerts.
- RS485 connections for components like the optional hygrotherm sensor and climate control unit.
- Grounding scheme and fuse protection for circuits.
Original MOSFET N-Channel STGF10NC60KD GF10NC60KD 10NC60 10N60 10A 600V NewAUTHELECTRONIC
This document provides information on N-channel 600V-10A IGBTs from STMicroelectronics' PowerMESH product family. The IGBTs feature low saturation voltage, low CRES/CIES ratio to prevent cross-conduction, and a soft recovery diode. They are optimized for high frequency motor control applications and can withstand short circuits up to 10 microseconds. Electrical characteristics, switching performance curves, package details, and test circuits are included for the D2PAK, TO-220, and TO-220FP packaged devices.
This document provides the electrical specification requirements for a DC voltage stabilized supply (DC VSS) to be used in a Samsung Electronics PD55B2Q product. The DC VSS has 4 voltage outputs and 4 current outputs, with a maximum total power draw of 236W. The outputs will be enabled by a remote ON/OFF control signal. The specification defines input requirements, output requirements including voltage levels and protection, mechanical specifications, environmental and safety requirements, and reliability testing requirements.
This document provides information on C120H circuit breakers including their function, technical data, description, curves, and catalogue numbers. The circuit breakers provide protection of cables against overloads and short-circuits in final distribution with manual control and isolation. They have current ratings from 10 to 125A and comply with relevant standards with breaking capacities up to 15kA. The document lists specifications for B, C, and D curve models.
The document provides a price list for various electrical equipment including:
1) Residual current circuit breakers (RCCBs) for single and three phase applications priced between 3,450-14,150 BDT.
2) Miniature circuit breakers (MCBs) for 6-50A applications priced between 490-1,850 BDT and for 6-100A applications priced between 650-3,000 BDT.
3) Molded case circuit breakers (MCCBs) for 16-1600A applications priced between 9,500-260,000 BDT.
Itron US BR 473 Ultrasonic Flow Meter - Brochure - EnglishThorne & Derrick UK
The US BR 473 is an ultrasonic flow meter well-suited for district heating applications. It has a flow range of 25-60 cubic meters per hour and transmits pulse outputs to connected calculators with programmable pulse weights. It is powered by the calculator, has high accuracy and robustness, and can be installed horizontally or vertically. Applications include heat, cooling, and combined systems. It meets various industry standards and has an IP rating of 54 or 68 depending on the version.
200 Series Interface A Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface A bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Kraus & naimer disconnectors kn pv-gbDien Ha The
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Dienhathe.com 1 general-catalogue
Catalog GE, Catalog,
Catalog Thiết Bị Điện GE, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp GE, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Dienhathe.com 1 general-catalogue
Catalog GE,
Catalog Thiết Bị Điện GE,
Catalog Điện Công Nghiệp GE,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Cataloge ge 1.residential components_and_enclosures_dienhathe.com-1_general_c...Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Similar to Rapport-de-calcul-Caneco-BT-Tarif-Jaune-distribution.pdf (20)
This document discusses water supply and purification for haemodialysis. It begins by explaining that haemodialysis machines use large volumes of water that must be very clean to avoid contaminating patients' blood. A multi-step water purification system is used, including particle filtration, ion exchange to soften water, carbon filtration to remove chlorine, and reverse osmosis to remove dissolved ions and produce high-purity water for dialysis. Regular maintenance and monitoring of the water purification system is needed to ensure patient safety.
A dialyzer is a device that uses diffusion and convection to remove waste and regulate electrolytes from the blood of patients with kidney failure. It contains hollow fibers that separate the blood compartment from the dialysate compartment. Blood flows through the hollow fibers while dialysate flows around them. Wastes diffuse across the semipermeable fiber membranes into the dialysate. The hollow fiber dialyzer is now the most popular design as it provides high clearance with a small, compact size and reduced risk of leaks compared to earlier designs like coiled and parallel plate dialyzers.
This document summarizes how a dialysis machine works to clean waste from the blood of patients with kidney failure. It explains that dialysis machines use a semipermeable membrane in the dialyzer to allow waste substances like urea to diffuse out of the blood into a dialysate solution, while preventing larger components like blood cells from passing through. The concentrations of important substances and water are kept equal on both sides of the membrane to prevent their unwanted removal during the dialysis process.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.