Rajendra S. Shinde has over 5 years of experience as an embedded software engineer. He has experience developing firmware for devices like meters and home automation systems using C/C++ on platforms like 8051 and ARM. Some of his projects include developing a three phase calibration meter, energy meter, and AC current source. He has a B.E. in electronics and telecommunication and certifications in embedded systems and Linux device drivers.

1. Mr. RAJENDRA S. SHINDE
Embedded Engg. (E&TC)
Contact:- +91 9404694561
Email: - rshinde170@gmail.com
Work Experience:
Working as Software Design Engineer in Educe Micro Research (Product based company) ,
Bangalore from Dec 2014 to till date.
Technical Skills :
 Advanced Technology: Embedded Systems
 Languages Known: C & Data Structure, C++,
 Operating System: LINIX, Windows.
 Embedded Cores: AT89S52, 8051F41X, 8051F120, ARM7TDMI.
 Tools/Technology: SiliconIDE, GDB, GCC, TCP/IP Socket Programming, Make file.
 Good knowledge of Linux Internals and theoretical knowledge of Device Drivers.
Projects Under Taken :
Currently Working Project: Relay Test Kit (started on Feb 27).
Role Description: Software Developer.
Worked projects:
Project 1: Three Phase Calibration Meter (@Educe Micro Research)
Role Description: Software Developer (firmware Developer).
Details: This Project was used to develop an instrument, whose output was used as a standard
for calibrating other meters. It was developed, under the dynamic guidance of my senior
colleague, using Embedded C language. I was mainly involved in writing code for interfacing
the controller with its peripherals.
Protocols Used: SPI, UART communication (MAX232, RS485), SMBUS (master controller
8051F120 communicates with 3 slave controller 8051F410).
Hardware Peripherals: ADC CS-5463, EEPROM (AT24C04),Serial to parallel Decoder IC
(74HC164), Multiplying DAC AD-5449 & 20*4 Line LCD display.
Project 2: Single Phase Calibration Meter (@Educe Micro Research)
Role Description: Software Developer (firmware Developer).
Details: This Project was used to develop an instrument, whose output was used as a standard
for calibrating other meters. I was involved in this project along with my colleague senior and
was written in Embedded C language. I was mainly involved in writing code for interfacing the
controller with its peripherals.
Protocols Used: SPI, UART, SMBUS (master controller communicates with slave controller).
Hardware Peripherals: ADC CS-5463, EEPROM (AT24C04), Multiplying DAC AD-5449 &
20*4 Line LCD display.
Local Address
#4, 5 Venkatadri Building, Nehru
Road, Pattangere, Raja Rajeshwwari
Nagar, Bangalore.

2. Project 3: Energy Meter (@Educe Micro Research)
Role Description: Software Developer & Tester.
Project Details: We had developed an energy meter which was used to measure different
electrical parameters such as Current, Voltage & Energy and send these details along with the
date and time at which the information was recorded to a server using a GSM/GPRS model.
Protocols Used: SPI, UART for Communication between GSM and Controller.
Hardware Peripherals: ADC CS-5463, EEPROM (AT24C04), Multiplying DAC AD-5449
RTC & 20*4 line LCD display.
Project 4: AC Current Source with relay tripping (@Educe Micro Research)
Role Description: Software Developer, hardware design and testing.
Details: This device can provide 3 different ranges of current
1. Lower range (10 mA to 100 mA )
2. Middle range (100 mA to 2 Amp)
3. Higher range (2 Amp to 20 Amp).
Ranges are selected using rotary switch and amplitude varied with 10k pot.
Protocols Used: SPI (master controller communicates with slave controller).
Hardware Peripherals: ADC CS-5463, 10k Pot, 16*2 line LCD display.
Project 5: DIAGNOSTIC TOOL FOR 89S52 KIT (@Vector India Institute).
Description: Objective of this project was to test peripherals provided on the kit. It consists of a
Seven Segment Display, LED, LCD Display, MCP3201 ADC using SPI protocol, AT24C01A
EEPROM using I2C protocol Keypad Matrix and RTC.
Project 6: GSM BASED WIRELESS DISPLAY SYSTEM (@College)
 This project was about controlling a display system through wireless communication
using GSM.
 The project mainly focuses on transmission and receiving of textual data through air
interface by using GSM through asynchronous serial communication. So for this purpose
a model is designed where message, which is to be displayed, is sent through a SMS and
displays that information on a display board.
 The main component of the system includes microcontroller (AT89S52) and GSM
modem. The GSM modem receives the SMS and transfer the information to
microcontroller and microcontroller display that information on a LCD display.
Project 7: GSM BASED HOME AUTOMATION SYSTEM (@Own Interest)
Role Description: Software Developer, hardware design and testing.
Details: To control home appliances such as TV, Fan Lights etc. using GSM SMS service. The
ON and OFF mechanism of these domestic appliances is done through communication between a
GSM and a Controller. The controller decodes the text and trips the corresponding relay so as to
switch it between its ON and OFF state.
Project 8: Student Data Base Program Using Singly Linked List (@vector India)
 We can add new record for a Student.
 Deletion of Existing Students record.
 As per need we can Print Student Data Base.
 Save Data in DB File.

3. Educational Qualification:
Exam Board/University Marks (%)
B.E.(E&TC) SGBAU,Amravati 63.07
XIIth
(H.S.C.) Aurangabad 65.83
Xth
(S.S.C.) Aurangabad 75.73
Achievements :
Received a Certificate from Vector India Pvt Ltd for successfully completing Embedded System
training program of 6 months duration.
Recently attended a Linux device driver basics course for 4 weekend’s.
Personal Profile :
 Name : Rajendra Sahebrao Shinde
 Birth Date : 20/06/1990
 Permanent Address : At: Shripat Dhamangaon, Post: Gunj
Tq: Ghansawangi, Dist: Jalna
Pin: 431211. (MH)
 Languages known : English, Hindi, Marathi.
 Nationality : Indian
 Marital Status : Unmarried
 Hobbies : Meditation, playing Badminton, Listening Music &
Making Friends.
 Passport Number : M0579146
Declarations :
I hereby declare that the particulars given above are true to the best of my knowledge and belief.
Date:
Place: Bangalore RAJENDRA S. SHINDE