Raj Kumar is an embedded systems professional with 12 years of experience developing microprocessor and microcontroller-based products using C, assembly language, and electronics circuit design. He has expertise in areas such as wireless technologies, communication protocols, Linux, Windows, and various microcontrollers including ARM, AVR, and MSP430. Raj seeks a position where he can establish himself through his work and help organizations succeed and grow.

1. Raj Kumar
Primary: +91- 8439660934
Alternative: +91- 9599193486
PASSPORT NO: M2261772
E-mail: kraj.kiet@gmail.com
Objective
To work in position where I am known from my work, achievement; I want to establish myself is as
brand for success and growth of organization.
SUMMARY
Versatile R&D professional 12 years in conceptualization and development of
Microprocessor/Microcontroller-based Products and Solutions, specialized skills in Embedded C,
Assembly Language and Hardware electronic circuit
My role:
• manage team of engineer
• Troubleshoot project and provide solution,
• writing code, optimize and integrate solution
• Assign work to team members, discuss task with team members
Profile:
• Proficiency in C. and firmware Development
• Strong debugging skill
• Linux Shell Scripts, C, Kernel Level Programming using VIM
• Cross compiler tools, kernel compiling and porting image into SDCARD
• Good knowledge of real time Operating System(RTOS) e.g.: KIEL,rtxtiny,
UCOS-II, WINCE 5.0 stream device driver development, Contiki for cc2530/31 SOC
(Arm-Beagle board, ARM-Beagle bone Black bring up)
Building and installing tool chain and burner
• Wireless technology like ZIGBEE, Bluetooth, Debugging RF packet using Wireless
sniffer
• Communication protocol like RS-232, 485,422, USB, IIC, SPI etc.
• Window C, LINUX C Programming.
• Vast exposer to Microcontroller like ARM-Cortex-M0, ATMEL, AVR, ARM-CortexA8,
Micro Blaze, Microchip, MSP430, SOC-CC2530/31, JENNIC, RABBIT 5400, 0x86
architecture.
• Spartan-6 LX9 EDK FPGA USING C
• Electronics Circuit analysis and design using Proteus.
• Study and analyzing OBD-II
• SERVO MOTOR, STEPPER MOTOR INTERFACE FOR SOLAR PANAL 24V/3.6
AMP
Work experience detail:
Presently working on ARM CORTEX M0, SPARTAN-6 LX9 MICROBLAZE on EDK
project for TechAditya, Ghaziabad as Embedded System Consultant from March 2016
 COMPUTER SCIENTIST in JASCH INDIA LTD ,SONEPAT HARYANA from
June 2015 to Feb2016

2. Objective: Process Application is to draw profile of paper, steel or any sheet at manufacturing
site or factory.
Introduction of my Profile: Built application using VISUAL STDIO 2013, C coding
hardware interface
This application had Multi-thread, TCP/IP based multi-server-multi-client win C application
this application one end interface with Machine using TWINCAT AND one interface with h
Remote PC running Lab-View application to control- monitor drive, GPIO, PHOTO-
SENSOR, Radio-Active(GAMMA BETA RAYS),MICROWAVE,X-RAYS source to
measure thickness/COATING thickness of Paper-Sheet, Steel-sheet or Other sheet
Machine had scanner-head which can be moved forward or reverse non-contact type
between edge of sheet size per width with encoder count, moisture, width and other
parameters.
Paper or Steel Edge sheet find method: Fixed points, Photo-sensor, voltage sensing
Measuring Mode:
• Single Spot point,
• Triple spot with parking or not
• Continuous scanning
 Worked as Project-Leader in their R&D center at SUMONA AUTOMATION PVT
LTD,NOIDA from 1st Oct 2010 to June 2015
Platform Used: C Embedded, Compiler: IAR Workbench, LINUX, contiki, CODE
BLOCK
• Product name: Low power sensor network using 6LowPAN, IEEE 802.15.4
Platform CC2530/31 SOC TI’s
My role in this product: Independently working to port contiki-2.6 Linux Ubuntu, build tool-
chain to for cc2530 and cc-tool to burn hex file to SOC.
• LINUX SCULL character device driver Development, Parallel port driver serial port
driver using UART chip PC16550D/A.
• Product name :CIH (Control in Hand)
This is product is intended for home and industrial automation usage interface with android
UI in mobile.
What is Utility of product: the objective of this product is to set control point for analog
signals, switching on off time and any scheduling event even at remote place securely via
android device which has GPSR/GSM telephony.
What is Inside of this product: this is designed on Zigbee -2.4 Ghz band in CC2531/30 micro-
controller and GSM module interfaced on UART

3. My role in this product: Architect whole product from design prospective, written coding,
integration, DEBUGGING fault, adapted for different customization
• Product name :WPMI (water purity measurement instrument) on MSP430f41X Series
This has LCD interface to display to impedance Converter Chip AD5933 and pH
measurement using CHIP AD7993.
 Worked as Team lead at HSG Technology, Noida from 1st Aug 2009 to 4th Sept 2010
Platform Used: Rabbit Microprocessor RCM 4200, RCM 5700, AVR 8 BIT Microcontroller, RTOS:
UCOS-II
Language/Compiler: C/Dynamic C
Project Detail: This product is designed and developed using “Rabbit Microprocessor” and
Interfacing to MMC-Card, LCD Display, PS-2 Keyboard, ADC 3208, 27s17 I/O Expander, DAC and
Smart Card Reader (SMART I)
Product name: Door Controller This system designed and developed in house to meet the following
requirement:
1) Security
2) Controlled Access to door.
3) To Centralize Database in building
4) To make building Energy Efficient
5) Ambient Monitoring and Controlling like Temperature, Pressure, and CO2
Features of Product
• Four smart cards –Reader, Interface via RS-485 BUS
• Opening closing of door and getting feedback if door is not opened and generating Alarm
• Communication: via TCP/IP to Server, Mode-BUS.
• LCD, PS2 Keyboard Interface, MMC card for Storing LOG into Memory
• System Architecture: Client-server model having three sockets for three different ports
• For System Health, Log-Information, Configuration from Server to Client.
Time duration: 3 months
Project Status: Released and installed successfully. Company received opportunity for another
project.
Firmware Development Team size: Individual
My role: I have been involved for this project from Designing from Scratch
• Business Logic Development, Driver Development and Integration of Written Code
• Product brief Description: This has four smart card readers for four doors; each card
holder has different access level. This system designed to make three sockets on three
different ports, for three different functions. When system is on line this sends door log
packet to server else keep in its memory when it will later come online then uploads all
Log Info to Server.
 Worked as Senior Design Engineer at Indo Asian Ltd from 28th Jan 2008 to 30th July 2009
Project Title: Wireless Remote Display Unit for Energy Meter (AMR system)
Microcontroller JN5139r1 32BIT Micro-Controller, ATMEGA-128L (8-BIT Microcontroller)

4. Tool/SDK: Code-Block, ICC-AVR Compiler
Language: C
Project Detail: Jennic Microcontroller 32BIT having Trans-Receiver on CHIP and controller has
built in ZIGBEE STACK
• Interfacing of Energy meter to data-logger via RS-485, and RS-232 interface to GPRS
Module for sending data to server via TCP/IP
• Slave module interface via RF (2.4GHz) band to Master Module
• Master module to data logger via RS-232
Team size: 4
My responsibility: Firmware Part Development
• Development of Logic and flow chart for Data logger and RF Part
• Written C code for GPRS interface to Microcontroller and master and Slave board
• Integration of code
• Testing and Debugging of Program Code and Testing of project
 Worked as R&D Engineer in Pep InfoTech Ltd, MEERUT from June 2007 to Jan.2008
Product name: GSM-COIN PHONE, FWP (fixed wireless phone)
My responsibility: Worked on GSM-COIN PHONE firmware to remove faults, Testing, Maintaining
of Software working file.
Language/Tool: Assembly (KIEL-Assembler), PICE-Debugger, DSO.
Product Description: GSM COIN PHONE is used by user to run PCO business .It require SIM -card
to be inserted of required operator (service provider like Airtel, Idea or Hutch). For making any call to
network or line, required number of Re 1 coin/s is/are inserted. It is suitable for any remote place
where GSM network is available. This product can be locked to any network then no other SIM can
be used. Or operator provided special SIM called factory- SIM for this coin phone can be used.
---------------------------------------------------------
Product Title: Limited number of Atmel Microcontroller Programmer
My responsibility: Written Software Program and Tested Product, Maintain Document.
Microcontroller: ATMEL -89S8253
Language/Tools: C (KIEL-Compiler)
Product description: this device can program max 8k bytes of hex code to target
microcontroller. This device has one master microcontroller to program limited number of target
microcontroller. As master has on chip EEPROM, after each programming cycle count is updated and
when count gets exhausted, master become obsolete and requires reprogramming.
Feature of Programmer:
• It is parallel programmer so it takes few seconds (6-7 seconds) to Program a Target chip.
• Target is locked with three locking bit. Target program is safe and no threat is left for
software misuse.

5. • If any case master fails to either program or provide lock, then target device data is erased and
fail LED is switched on.
• LED is provided to indicate programming in progress, programmed and failure status.
-----------------------------------------------------
Product name: PCO machine for NET4INDIA
My profile : Modified in software program to suit their Tariff Structure for Net For India, Testing
of Product.
Microcontroller: Phillips 89C61, (external memory) RAM, ROM.
Language/Tools: C-Archimedes (Compiler), KIEL
Product Description: PCO Machine is installed to meter Local, S.T.D. And I.S.D. calls its
installed on line such as P&T, or any line, which can accept pulse or DTMF dialing and when called
party pick-up phone, give metering signal to calling side so that metering can start in PCO machine.
As call matures, small printer of makes PT-42 (Epson), used to print tariff information. NET4INDIA
provides service using VOIP (voice over internet protocol). It gives reversal polarity for metering. So
after modification our machine becomes compatible for NET4INDIA.
 Worked as R&D Engineer in Agni Suraksha Electronic System Pvt Ltd, Mandawali Delhi
-92, from Jan. 2004 to May 2007
Product name: Power-Monitoring System
My profile : Written software program, Testing.
Language/Tool: Assembly /MPLAB (Assembler)
---------------------------------------------------------
Product name: Phase Selector System
My profile : Written Software Program.
Language/Tool: Assembly /MPLAB (assembler)
Product Description: this is developed on PIC-microchip 16f72 microcontroller
---------------------------------------------------------------
Product name: 4- Zone Fire Alarm System
My profile : Written Software Program, Testing and Debugging
Language/Tool: Assembly /ASM-51(Cross Assembler)
Educational Qualification:
• B.E. Degree completed in 2003 from Electronics and Communication Stream from Krishna
Institute of Engineering and Technology (KIET), Ghaziabad affiliated to Dr.B. R. Ambedker
University with 76.15%
• Passed 12th from CBSE Board in 1997 from DMA-II
• Passed 10th from CBSE Board in1995 from DMA-II

6. Personal Profile:
Father's Name: SHIV KUMAR
Date of Birth: 03 NOV., 1978
Marital Status: MARRIED
Nationality: INDIAN
PASSPORT: M2261772
Address:
G-123 UDAY PARK,
PALLAV PURAM-II,
MODIPURAM,
MEERUT-250110,
UTTAR PRADESH,
INDIA
• I certify that the information furnished above is true to the best of my knowledge.
Date:
RAJ KUMR
Place: MEERUT (U.P)

7. Personal Profile:
Father's Name: SHIV KUMAR
Date of Birth: 03 NOV., 1978
Marital Status: MARRIED
Nationality: INDIAN
PASSPORT: M2261772
Address:
G-123 UDAY PARK,
PALLAV PURAM-II,
MODIPURAM,
MEERUT-250110,
UTTAR PRADESH,
INDIA
• I certify that the information furnished above is true to the best of my knowledge.
Date:
RAJ KUMR
Place: MEERUT (U.P)