The document describes a burn down chart that has been produced for the latest iteration of a project. The chart indicates that: - The iteration will not deliver all remaining story points by the end. - No user stories were completed on days 1, 5 and 7. - The team has completed 30 story points so far.

1. The following burn down chart has been produced showing the situation 7 days through the latest
iteration in the project.
What does this chart tell us about the current iteration?
i. The iteration will not deliver the all the remaining story points by the end of the iteration.
ii. No user stories were completed on days 1, 5 and 7.
iii. The team has completed 30 story points so far in the iteration.
iv. No work was done on days 1, 5 and 7.
v. There are 30 user story points left to complete in the iteration.
A i and iv only.
B ii and iii only.
C i, iii and iv only.
D ii and v only.

2. An initial IT system use case diagram has been developed for a school Student Assessment System.
In reviewing the use case diagram, the business analyst has suggested that the following
elements in the diagram could be incorrect:
i. The ‘Assessment Administration’ use case
ii. The ‘View Results’ use case
iii. The ‘School Administrator’ actor
iv. The ‘Teacher’ actor
v. The System name (within the boundary)

3. Which of the following combinations identifies what is incorrect in this diagram?
A i and iv.
B ii and iii.
C i and iii.
D iii only.
Which of the following techniques does a Business Analyst NOT utilize to gather information from
stakeholders?
A) Interviews and facilitated discussion
b) Document and process analyses
c) Case modeling
d) Discussions with product suppliers
What is the purpose of the Requirement Traceability Matrix?
a) It records all the requirements given by a client and ensures that all the necessities are met.
b) You can answer by stating that selecting a life cycle model is exclusively based on the type,
scope, and limitations of the project.
c) The first phase is the users' identification to create a role-profile for every user category and
recognition of goals associated with every role.
d) A project lifecycle uses RTM, and it depends on the utilization process of a business analyst.
Which Agile ceremony does this describe?
A Show and Tell.
B Iteration Planning Meeting.
C Retrospective.
D Daily stand-up.

4. The project team are holding a meeting and during the meeting they discuss the following:
A. What went well?
B. What didn’t go so well?
C. What could we do differently next time?
D. Actions
As part of a university assessment system project, the project team are reviewing the following story.
049: Show my exam results on social media
As a student I want to be able to share my exam certificate on social media so that my friends
And potential employers can see my achievements. In the review, it was discussed that there are
multiple social media channels that could be Used and that no channels had been specified. Which of
the INVEST rules for writing a
Quality user story are not being met?
A Small and Estimatable.
B Testable and Independent.
C Estimatable and Valuable.
D Valuable and Negotiable.
The following user story is being discussed in the Agile team.
Customer fingerprint login
As a customer I want to be able to login using my fingerprint reader on my mobile phone so That I can
access my account without needing to type my password. During the conversation it was determined
that there is an associated non-functional requirement that if there are 3 failed attempts to login using
the fingerprint reader then the customer will need to provide their username and password. This non-
functional requirement is specific to this user story.
Requirements could be documented in the following areas.
i. User story acceptance criteria for “Customer fingerprint login”.
ii. Requirements catalogue.
iii. Use case description for “Customer fingerprint login”.

5. iv. A separate user story.
Where should the non-functional requirement be documented?
A ii or iv.
B iv only.
C ii only.
D i or iii.
A small independent photography company has a business goal of providing a scanning and
enhancement service to produce premium quality prints from customer’s old printed photographs,
negatives and slides. The business analyst has decomposed this goal into the following potential sub-
goals.
i. Buy professional scanner.
ii. Produce prints from customers’ old photographs.
iii. Install scanner
iv. Provide photographic enhancement service.
v. Produce prints from customers’ photographic negatives.
Which of these are valid sub-goals?
A i and iii only.
B ii, iii and v only.
C ii and v only.
D i, iii and iv only
What is UML?
A. Undefined Modeling Language
B. Universal Modeling list
C. Unified Modeleing language
D. Universal Modeling Language

6. FRD stand for?*
A. Flight Requirement Document
B. Foundation Requirement document
C. Functional requirement document
D. Fatal requirement document
SDD stand for?*
A. system development document
B. system disintegration
C. synonyms design document
D. system design document
Which tool is used in business analyst? *
A. my sql
B. msexcel
C. ms access
D. sql
INVEST stands for?*
A. idependent negotiable valuable estimable sized appropriatly testable
B. investments
C. international navigation valuable estimable sized appropriately technic
D. independent negotiable valuable effects system analysis testable

7. _________ Analysis is used to analyze a system in terms of its requirements to identify its impact on
customer satisfaction.*
A. Keno
B. paretto
C. root cause
D. impact
Which elements category is NOT used in BPMN?*
A. Flow objects
B. Artifacts
C. Data
D. Text
A project team is working on the development of a mobile phone-based expenses management system
for a national mental health charity. Volunteers currently submit their travel expenses by completing a
paper form and sending it with receipts via the post. One of the requirements is to use GPS tracking to
automatically and accurately determine mileage for visits which is considered useful but is not a
mandatory requirement for the project. The project is nearing completion and this is the final iteration
for the project. Which of the following MoSCoW priorities SHOULD be allocated to the automatic GPS
tracking requirement for the final iteration?
A M.
B S.
C C.
D W.

8. Which statement is incorrect?
A. Gap Analysis is a technique to analyze the gap between the existing system and functionalities,
and the targeted system. Here gap means the amount of task or change that may be required to
get the intended result. It’s a performance level comparison between the present and the
proposed functionalities.
B. A gap analysis process allows organizations to determine how to best achieve their business
goals.
C. A gap analysis is a method of assessing the performance of a business unit to determine
whether business requirements or objectives are being met
D. A gap analysis is process that compares actual performance or results with what was expected
or desired Profits
There are various techniques which are used for requirements prioritization. Which is not used for
requirements prioritization
A. MoSCoW Technique
B. Requirements Ranking Method
C. 100-dollar method
D. Five Whys
E. SWOT
What is Kano analysis?
A. Kano Analysis is used to analyze a system regarding its requirements to identify its impact on
customers’ satisfaction
B. It is a graphical representation of business processes.
C. Analysis which is also known as 80/20 rule is a decision-making technique. It is a useful
technique for defect resolution and quality control. As per this analysis rule, 20 % causes create
80 % effects in a system, which is why it is named as 80/20 rule.
D. This is the technical implementation step of the requirements where a business analyst gets
involved with different teams.

9. Process design is a way that helps a business to analyze the challenges in business and to find an
effective solution for those. Through Process design workflows are created to get the best possible
outcome in the shortest time.
A. True
B. False
Kanban is a tool which helps the agile team to visually guide and manage the work as it progresses
through the process. Besides, it works as a scheduling system in Agile just-in-time production. The
Kanban board is used to describe the current development status.
A. True
B. False
Increment refers to the sum of all the product backlog items completed in a sprint. The new increment
value will not includes the increment of the previous sprints.
A. True
B. False
What is FRD
A. Document consists of detailed requirements in technical terms and technical diagrams like UML,
Data Flow, etc.
B. Document is prepared during the planning phase of the project.
C. Document is developed for the business users, stakeholders, etc.
D. Document includes the high-level business requirement of a system to be developed in layman
language.

10. Documents that a business analyst use to handle?
A. Project vision document
B. Requirement Management Plan
C. User stories/ Use cases
D. RTM
E. BRD
F. DDS
Which is not Agile development life cycle approaches
A. Extreme Programming (XP)
B. Kanban
C. Scrum
D. Feature-Driven Development (FDD)
E. Prototyping
The Director of the Information Systems department in a large organisation that traditionally uses a
waterfall approach to development is looking to trial Agile development on a small project. The project
is for a single, small team to develop the first mobile application for the organisation’s employees and
whilst the development team are fully competent with the development language, they are not familiar
with mobile application development. The Director has asked the management team to consider which
might be an appropriate Agile method to use for this project. Which of the following would be best
suited to this project?
A. DSDM.
B. XP.
C. Lean Software Development.
D. SAFe

11. Dominique is the Head of Recruitment within the Human Resources (HR) department. Following a
review of recruitment processes and systems in the organization, a business transformation project has
been initiated. The director of HR, Sarah will be providing the project budget and managing the project
finances. Dominique will be the key HR representative on the Agile project and will be responsible for
the day to day decisions. Which of the following roles is Dominique playing on this project?
A. Product owner.
B. End user.
C. Project sponsor.
D. Subject matter expert.
What is the API’s purpose?
Knowing the purpose of the API will set a firm foundation for you to well prepare your test data for
input and output. This step also helps you define the verification approach. For example, for some APIs,
you will verify the responses against the database; and for some others, it is better to verify the
responses against other APIs.
A. True
B. False