This document describes the quality control system (DQS) used by Decno Flooring for their laminate flooring production. DQS involves multiple stages of quality checking and testing before, during, and after production. This includes checking raw materials, monitoring the production process, and performing tests on finished products to check for defects and ensure dimensional accuracy. DQS aims to address all customer concerns regarding laminate flooring quality.
Universal abrasion resistant Tester can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials.
Universal abrasion resistant Tester can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials.
1.5 layer forming farbics by HENAN BEYNOST TEXTILE TECHNOLOGY CO., LTD.Benost Vincent
1.5 Layer forming fabrics is woven in warp and weft weaving method, the material is polyester monofilament, so it also called polyester forming fabrics,1.5 layer polyester forming wire is similar to double layer polyester forming mesh structure, mainly used in the production of wrapping paper, printing paper, writing paper, toilet paper, tissue paper, corrugated paper.
An experimental sample about tear strength testing of a fabric by Elmendorf's Tear Tester. This will helpful for the Textile Engineering student to know the measuring process of tear strength of a fabric.
Introduction on aggregate impact testing machine pptAbhishek Sagar
Toughness is the property of a material to resist impact. Due to traffic loads, the road stones are subjected to the pounding action or impact and there is possibility of stones breaking into smaller pieces. The road stones should therefore be tough enough to resist fracture under impact. A test designed to evaluate the toughness of stones
Astm designation c 136 for coarse aggregatesMuhammad Ahmad
Sieve Analysis for Coarse Aggregate as per ASTM. Slides contain all the relevant data and steps that would be required for the performance of sieve analysis of coarse aggregates.
Compliant polishing tools are utilized incomprehensibly as a part of vehicle and aviation businesses to clean complex surfaces and structures. The major advantages of using coated abrasive tools are that they are compliant and their geometry conforms to the surface of the workpiece. Though they have been used for finishing operations for a long time, not much work has been done to understand the effect of compliance on the distribution of forces in the contact area of such tools. Such understanding would help to reduce the trial and error operations involved and thereby reducing rework and cost.
The objectives of this study are as follows:
1) Study the effect of tool (rubber pad and abrasive cloth) compliance on contact pressure distribution and material removal of commonly used compliant polishing tools
2) The tool compliance is in turn studied by conducting material characterization; along with the geometry of the workpiece, other machining parameters are the key variables in this study
3) Design and analyze an active complaint finishing tool
Elcometer 456 Dry Film Coating Thickness Gauge sets new standards making meas...MM Naina Exports
Elcometer 456 Dry Film Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate Supplied in india by Multilab Chennai
http://www.multilab.biz/testing/elcometer-testing-equipments/dry-film-thickness/elcometer456-separate-coating-thickness-gauge.htm
Product Description:
The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient.
The Elcometer 456 is available in four different models: E, B, S and T. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 E, to the top of the range Elcometer 456 T, with memory, alpha-numeric batching and Bluetooth® communication.
Separate models, with their wide range of probes, provide even greater measurement flexibility.
All probes are fully interchangeable; whilst ferrous gauges accept any ferrous probe and non-ferrous gauges accept any non-ferrous probes the dual FNF gauges accept all ferrous, non-ferrous and dual FNF probes
1.5 layer forming farbics by HENAN BEYNOST TEXTILE TECHNOLOGY CO., LTD.Benost Vincent
1.5 Layer forming fabrics is woven in warp and weft weaving method, the material is polyester monofilament, so it also called polyester forming fabrics,1.5 layer polyester forming wire is similar to double layer polyester forming mesh structure, mainly used in the production of wrapping paper, printing paper, writing paper, toilet paper, tissue paper, corrugated paper.
An experimental sample about tear strength testing of a fabric by Elmendorf's Tear Tester. This will helpful for the Textile Engineering student to know the measuring process of tear strength of a fabric.
Introduction on aggregate impact testing machine pptAbhishek Sagar
Toughness is the property of a material to resist impact. Due to traffic loads, the road stones are subjected to the pounding action or impact and there is possibility of stones breaking into smaller pieces. The road stones should therefore be tough enough to resist fracture under impact. A test designed to evaluate the toughness of stones
Astm designation c 136 for coarse aggregatesMuhammad Ahmad
Sieve Analysis for Coarse Aggregate as per ASTM. Slides contain all the relevant data and steps that would be required for the performance of sieve analysis of coarse aggregates.
Compliant polishing tools are utilized incomprehensibly as a part of vehicle and aviation businesses to clean complex surfaces and structures. The major advantages of using coated abrasive tools are that they are compliant and their geometry conforms to the surface of the workpiece. Though they have been used for finishing operations for a long time, not much work has been done to understand the effect of compliance on the distribution of forces in the contact area of such tools. Such understanding would help to reduce the trial and error operations involved and thereby reducing rework and cost.
The objectives of this study are as follows:
1) Study the effect of tool (rubber pad and abrasive cloth) compliance on contact pressure distribution and material removal of commonly used compliant polishing tools
2) The tool compliance is in turn studied by conducting material characterization; along with the geometry of the workpiece, other machining parameters are the key variables in this study
3) Design and analyze an active complaint finishing tool
Elcometer 456 Dry Film Coating Thickness Gauge sets new standards making meas...MM Naina Exports
Elcometer 456 Dry Film Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate Supplied in india by Multilab Chennai
http://www.multilab.biz/testing/elcometer-testing-equipments/dry-film-thickness/elcometer456-separate-coating-thickness-gauge.htm
Product Description:
The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient.
The Elcometer 456 is available in four different models: E, B, S and T. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 E, to the top of the range Elcometer 456 T, with memory, alpha-numeric batching and Bluetooth® communication.
Separate models, with their wide range of probes, provide even greater measurement flexibility.
All probes are fully interchangeable; whilst ferrous gauges accept any ferrous probe and non-ferrous gauges accept any non-ferrous probes the dual FNF gauges accept all ferrous, non-ferrous and dual FNF probes
Elcometer 456 integral dry film coating thickness gauge sets new standards ma...MM Naina Exports
Elcometer 456 integral dry film coating thickness gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient
http://www.multilab.biz/testing/elcometer-testing-equipments/dry-film-thickness/elcometer456-integral-coating-thickness-gauge.htm
Product Description:
The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient.
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 456 E, to the top of the range Elcometer 456 T, with memory, alpha-numeric batching and Bluetooth® communication.
Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during measurement - allowing for consistent, repeatable and accurate results.
Key Features of the Elcometer 456 Coating Thickness Gauge include:
Easy
Large buttons ideal for gloved hands
Easy to use menus in multiple languages
High contrast colour LCD with auto rotate
High and low reading limit indicators
Factory calibrated for immediate use
Accurate
Measurement Capability to ±1%
Conforms to national & international standards
Temperature stable measurements
Increased reading resolution for thin coatings
Measures accurately on smooth, rough, thin and curved surfaces
Reliable
Repeatable and reproducible
2 year gauge warranty
Supplied with fully traceable test certificates
Batch date and time stamp facility
Rugged
Sealed, heavy duty and impact resistant
Dust and waterproof equivalent to IP64
Scratch and solvent resistant display
Durable gauge and probe construction
Suitable for use in harsh environments
Efficient
Fast reading rate of 70+ per minute
Multiple calibration memories
Alpha numeric batch identification
User selectable calibration methods
Compatible with all Elcometer software including ElcoMaster 2.0
Powerful
Wide range of interchangeable probes
USB and Bluetooth™ data output
Stores up to 150,000 readings in 2,500 batches
Measures up to 30mm (1200mils) of coating on metal substrates
Paper and Packaging Testing Instruments - Pacorr offers a wide range of highly accurate Paper and Packaging Testing Instruments that help the industries in testing the quality of their products. Call now for price: +91 8882149230
Paper and Packaging Testing Instruments - Pacorr offers a wide range of highly accurate Paper and Packaging Testing Instruments that help the industries in testing the quality of their products. Call now for price: +91 8882149230
The PET bottles are often transported by stacking them upon each other. This might cause the bottle in
the bottom row to buckle, compress and deform. The manufacturers need to test the amount of load that
the bottles can bear when they are put under compressive forces. The Top Load Tester- Digital is the
instrument that gives an exact test result for the buckling capacity of the bottles or PET containers.
Check out this overview for the Outdoor Facade Strip LED Screen Solutions.
Specification and images included.
For more information contact us via email on info@crystal-display.com or call +44(0) 1634 327420.
Apparatus for Aggregate Impact Test
The apparatus as per IS 2386 (Part IV) - 1963 consists of
(i) A testing machine weighing 45 to 60 kg and having a metal base with a painted lower surface of not less than 30 cm in diameter. It is supported on a level and plane concrete floor of a minimum 45 cm thickness. The machine should also have provisions for fixing its base.
(ii) A cylindrical steel cup of internal diameter 102 mm, depth 50 mm and minimum thickness 6.3 mm.
(iii) A metal hammer or tup weighing 13.5 to 14.0 kg the lower end being cylindrical in shape, 50 mm long, 100.0 mm in diameter, with a 2 mm chamfer at the lower edge and case hardened. The hammer should slide freely between vertical guides and be concentric with the cup. Free fall of the hammer should be within 380±5 mm.
(iv) A cylindrical metal measure having an internal diameter of 75 mm and depth of 50 mm for measuring aggregates.
(v) Tamping rod 10 mm in diameter and 230 mm long, rounded at one end.
(vi) A balance of capacity not less than 500g, readable and accurate up to 0.1 g.
The property of a material to resist impact is known as toughness. Due to movement of vehicles on the road the aggregates are subjected to impact resulting in their breaking down into smaller pieces. The aggregates should therefore have sufficient toughness to resist their disintegration due to impact. This characteristic is measured by the impact value test. The aggregate impact value is a measure of resistance to sudden impact or shock, which may differ from its resistance to gradually applied compressive load.
Procedure of Aggregate Impact Test
The test sample consists of aggregates sized 10.0 mm 12.5 mm. Aggregates may be dried by heating at 100-110° C for a period of 4 hours and cooled. (i) Sieve the material through 12.5 mm and 10.0mm IS sieves. The aggregates passing through 12.5mm sieve and retained on 10.0mm sieve comprises the test material. (ii) Pour the aggregates to fill about just 1/3 rd depth of measuring cylinder. (iii) Compact the material by giving 25 gentle blows with the rounded end of the tamping rod. (iv) Add two more layers in similar manner, so that cylinder is full. (v) Strike off the surplus aggregates. (vi) Determine the net weight of the aggregates to the nearest gram(W). (vii) Bring the impact machine to rest without wedging or packing up on the level plate, block or floor, so that it is rigid and the hammer guide columns are vertical. (viii) Fix the cup firmly in position on the base of machine and place whole of the test sample in it and compact by giving 25 gentle strokes with tamping rod. (ix) Raise the hammer until its lower face is 380 mm above the surface of aggregate sample in the cup and allow it to fall freely on the aggregate sample. Give 15 such blows at an interval of not less than one second between successive falls. (x) Remove the crushed aggregate from the cup and sieve it through 2.36 mm IS sieves until no further significant amount passes in one minute.
Polyfilms and laminates testing instrumentsPacorr Testing
Poly Films & Laminates Testing Instruments - Pacorr offers a wide range of highly accurate Poly Films & Laminates Testing Instruments that help the industries in testing the quality of their products. Call now for price: +91 8882149230
This video is all bout our company profile and services we provide.
We are the stretch ceiling manufacturer and service provider across the India and Asian and middle east Countries. We manufacture PVC stretch ceiling and provide different product services like Graphics stretch ceiling, 3D ceiling, translucent ceiling etc. We describe about the process of installation and removal of ceiling and other technical details. Hope everyone like this video.
For any Query
give us a call at +91 9594983250 +91 9810322567
visit us at https://xxtraceil.com/
Started to create milestones, We, DCMS Engineering Company marked our presence in the year 1976 and operate in the manufacturing/servicing of Specialising in customised & allied fabrication work since 37 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Ion Exchange Vessels, Storage Tank, Heat Exchanger, Spent Fuel Storage Trays, Super Heater, Metal Container, Inconel Process Vessel has deepened our roots in the market. We, DCMS Engineering Company breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Décor colors of decno laminate flooringjiang12707070
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Contact info
Tel: +86-31180955326 +86-15531128668
+86-13730125508 +86-13673139525
Email: enquire@decnoflooring.com sales@decnoflooring.com
Your enquire will be responded within 24 hours.
You can also talk to the sales director of DECNO- Mr Jason directly by:
phoneCell phone: +8613673139525
phoneWhatsApp: +8613673139525
phoneSkype: decnojason
phoneWechat ID: decnojason
Job Opportunity
Miss Sany
+86 15803213506
hr@decnoflooring.com
Air filter elements manufacturer from Chinajiang12707070
Send E-mail to us: info@thenow.cn
Our company is in Shanghai, the economics and financial center of China.
Welcome you contact us and check our ability.
Add: No.358 XinqinRoad,Nanxiang Town,Jiading District,Shanghai,China
Service hotline: 400-876-1888
Tel: +86-21-51082108*802(ext.)
Fax: +86-21-66613500
Email: info@thenow.cn
SKYPE: thenow.nina
Website: www.thenowfilter.com
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
3. is first laminate flooring
supplier who sets up its
own quality control
system. All your
concerns on laminate
flooring quality will be
covered into DQS.
DQS
TM
4. Clear up all your
concerns on Laminate
Flooring Quality.
DECNO
Quality
System
9. Test performs on finished
products
Determination of thickness
Using the micrometer, calliper gauge or any other equivalent tool, measure the thickness at a distance of 20
mm from the edges of the surface layer, at points located in each corner and in the middle of each long side
(only four corner points if length < 600 mm)
Dimensions in millimetres
20
l/2
20
2020
DQS
TM
10. Test performs on finished
products
Determination of length
Using the appropriate calliper gauge or any other equivalent tool, measure the length of the surface layer
along two lines parallel to the axis of the test specimen, at a distance of 20 mm from the long sides
Dimensions in millimetres
2020
l
DQS
TM
11. Test performs on finished
products
Determination of width
Using the appropriate calliper gauge or any other equivalent tool, measure the width , along two lines
parallel to the sides of the surface layer, at a distance of 20 mm from the sides, and in the middle for elements
with a length greater than 600 mm
Dimensions in millimetres
0202
l/2
DQS
TM
12. Test performs on finished
products
Place one side of the square against one long side of the surface layer of the element. Using the thickness
gauges, determine the maximum deviation from square q at the small side. Repeat the procedure on the
diagonally opposite corner
max
W
l
q
Determination of squareness
DQS
TM
13. Test performs on finished
products
Determination of straightness
s
l
Place the steel ruler against one long side of the surface layer. Using the thickness gauges, determine the
maximum deviation S from the ruler. Measure only the concave or cupped sidemax
DQS
TM
16. Test performs on finished
products
Determination of thickness swelling
1 2
Determine the initial thickness of the test specimens perpendicular on the extreme edges at the six points
indicated in Figure G.2. Place the two test specimens in the water bath as illustrated in Figure G.3. Remove
the test specimens after 24 h ± 15 min, and dry them with a towel. Determine the final thickness of the
test specimens perpendicular on the extreme edges at the same six measuring points.
Dimensions in millimetres
50
DQS
TM