This document certifies that QRICS Calibration Laboratories Pvt. Ltd. has been accredited by the Accreditation Commission for Conformity Assessment Bodies (ACCAB) according to the international standard ISO/IEC 17025 for demonstrating technical competence in mechanical quantities. The accreditation is valid until October 21, 2014 for calibration of mass, weighing balances, push pull meters, durometers, and torque wrenches within specified measurement ranges and uncertainties at its facility in Pune, India. The annex provides details on the laboratory's scope of accreditation including calibration methods and equipment used.

1. ACCREDITATION
This Accreditation demonstrates technical
competence for a defined scopeas detailed in and
at locations specified in the annexure to this
certificate of the ACCAB's client Calibration
Laboratory hereinafter calledthe Organization.
This certificate is for the exclusive use of the
Organization and is provided pursuant to the
Accreditation Agreement between ACCAB and
the Organization.
Assumption or Presumption of the applicability
of this document is solely drawn by and at the
discretion ot'parties who may find this document
beneficial.
The validity of this certificate is subject to the
continued operation of laboratory quality
management system maintained by the
Organization in compliance to the current
version of the standard ISO/IEC 17025 and is
monitored by ACCAB through ongoing
assessments.
The validity of this certificate should be
confirmed through the ACCAB website:
www.accab.org.
D This is not a legal document.
Certificate of Accreditation
This is to certify that
QRICS Calibration Laboratories Pvt. Ltd.,
has been assessed by ACCAB and meets the requirements of International Standard
ISO/IEC 17025:2005
(General requirements for the competence of testing and calibration laboratories)
while demonstrating technical competence in the field of
Mechanical Quantities
Address to which this certificate refers:
Location: GP/67, Paras Complex, Office No. 7,8.9 & 10.
Thermax Chowk, MIDC, Chinchwad. Pune - 411019
Certificate Issue Date: 22nd October 2013 Certificate Expiry Date: 21" October 2014
Initial Accreditation Date: 22°" October 2013 Re-Accreditation Date: 21" October 2016
Accreditation Commission For Conformity Assessment Bodies Private Limited
Suite #114, Level 1, Master Mind IV, Royal Palms, Aarey Colony,
Goregaon East, Mumbai - 400 065 India.
Tel.-022-28794410,28794411,28794412
URL: www.accab.org E-Mail: info@accab.org
ACCAB
PLATINUM PLUS
ISO 17O25
Accredited
Calibration
Laboratory
Certificate No.: ACCAB/IN/CL/1003
Signed for and on behalf of ACCAB
Dilip H. Deshmukh
Chief Executive Officer

2. ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
Suite # 114, Level 1, Master Mind IV,Royal Palms, Aarey Colony, Goregaon East, Mumbai 400 065,India.
Telefax: 022 - 2879 4410,2879 4411,2879 4412, URLrwww.accab.org E-Mail: info@accab.org
ANNEXURE: SCOPE OF ACCREDITATION
Laboratory's Name: QRICS CALIBRATION LABORATORIES PVT. LTD.,
Address: Paras Complex, GP/67, Office No. 7,8,9 & lO.Thermax Chowk,
MIDC, Chinchwad, Pune-411 019,India.
Discipline: Mechanical Quantities Reference No.:
Accreditation Standard: ISO / IEC 17025:2005
ACCAB/IN/CL/1003
Certificate Issue Date: 22nd October 2013 Certificate Expiry Date: 21st October 2014
Revision No: 00 Revision Date:
Sr.
No.
1
2
3
Parameter /Device
under Calibration
Mass
Weighing balance
Push Pull Meter
Master Equipment Used
Electronic Weighing
Balance & Analytical
Weights
Analytical Weights
Analytical Weights
Range ofMeasurement
1 mg - 200mg
200mg-100g
100g-200g
200g-5kg
Upto 220g
Upto 5 kg
Upto 30 kg
Upto 50 kgf
Not Applicable
* Calibration Measurementcapability
(±)
0.73
1.13
0.72
mg
mg
mg
6g
0.6mg
1.2 g
0.65 g
144 g
Remarks/Method Used
OIML R 111 - 1
OIML R 76- 1
Page 1 of 2 Authorized Signatory
ACCAB

3. ACCREDITATION COMMISSION FOR CONFORMITYASSESSMENT BODIES
Suite # 114, Level 1, Master Mind IV,Royal Palms, Aarey Colony, Goregaon East, Mumbai 400 065, India.
Telefax: 022 - 2879 4410, 2879 4411, 2879 4412, URL:www.accab.org E-Mail: info@accab.org
BiiitHmlll ._ . ... .
ANNEXURE: SCOPE OF ACCREDITATION
Laboratory's Name:
Address:
Discipline:
Accreditation Standard:
Certificate Issue Date:
Revision No:
Sr.
No.
4
5
QRICS CALIBRATION LABORATORIES PVT. LTD.,
Paras Complex, GP/67, Office No. 7,8,9 & lO.Thermax Chowk,
MIDC, Chinchwad, Pune-411019,India.
Mechanical Quantities I
ISO/IEC 17025:2005
22nd October 2013 (
00 I
Parameter / Device Master Equipment Used
under Calibration
Durometer Rubber Hardness Tester
Torque Wrench Torque Calibration System
Range of Measurement
0-100 Shore A
0- 100 Shore D
1000 Nm- 2000 Nm
leference No.: ACCAB/IN/CL/1003
:ertificate Expiry Date: 21s1 Octc
Revision Date: Not App
* Calibration Measurement capability
(±)
1.2%
1.2%
0.26 %
)ber2014
icable
Remarks/Method Used
ASTM D 2240
IS / ISO 6789
Page 2 of 2 Authorized Signatory
ACCAB