Process And Chemial Industry Soil
•
0 likes•141 views
Soil can become an issue in several situations: 1) When relocating or redeveloping enterprises, soil investigations are required before transferring sites to ensure no remediation is needed. 2) After calamities or malfunctions that cause spills or leaks, authorities may mandate soil investigations and remediation to restore contamination. 3) During acquisitions, due diligence assessments evaluate past spills requiring future remediation or monitoring. 4) Risk control involves monitoring soil and groundwater quality to ensure contaminants don't impact the environment or production.
Report
Share
Report
Share
![When becomes Soil an issue to deal with? ,[object Object],[object Object],[object Object],[object Object],[object Object],Note: Soil = ground and groundwater](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Environmental revised 11-12
GSI Engineering provides a wide range of environmental services including site assessments, remediation, regulatory compliance, underground storage tank mitigation, waste management, and environmental consulting. Services include phase 1 and 2 site assessments, remedial action planning, regulatory audits, monitoring well installation, remedial system installation, aquifer evaluations, and waste characterization. GSI aims to serve as an advocate for clients by keeping up to date on regulatory trends and forecasting solutions.
Anderton 0615
Charles H. Anderton Jr. is a registered professional engineer in Michigan with over 25 years of experience in fields related to utility energy logistics, power plant operations, resource recovery technologies, construction inspection, environmental assessments, and storm water management. He has worked on projects involving power plants, landfills, composting facilities, and environmental cleanup sites. Currently, he is the president and founder of Blue Vector Engineering, P.C.
One-Page Red Hill SI RA modeling Omaha feb13
Cardno TEC was contracted to characterize historic fuel releases from the Navy Red Hill Fuel Storage Facility located on Oahu, Hawaii. The facility consists of 20 underground storage tanks constructed before WWII with a total capacity of 250 million gallons. Past investigations identified fuel releases impacting groundwater quality near a drinking water well. Cardno TEC installed monitoring wells and developed a 3D groundwater model to evaluate fuel transport. Their risk assessments found no imminent threat to water supply. They established long-term groundwater and soil vapor monitoring programs and a groundwater protection plan implemented since 2004.
EWSO
The document describes an Exploration Drilling Schedule Optimization System (EDSOS) that has two main components: 1) a Drilling Scheduler that allows users to manually drag and drop wells into time slots and runs optimization scenarios based on constraints, and 2) a Task Tracker that monitors well planning, approval, drilling, and post-drilling activities. The system facilitates real-time impact analysis and optimization of the drilling schedule to meet exploration objectives like replacing oil production and increasing gas reserves.
28 voelzke sorenson issues of ageing sand2016 8277 c
SNL and BAM collaborate on issues regarding extended interim storage of spent nuclear fuel. BAM research on metal seals, elastomer seals, and polymers does not indicate safety issues so far regarding long-term performance. SNL is focusing on closing the technical gap associated with high burnup fuel cladding through further mechanical testing, thermal analysis, and transportation loading tests.
ENeilsenresume- Dec2015PE
Erik Neilsen has over 25 years of experience in radioactive waste management, project management, safety analysis, waste characterization and regulatory compliance. He has worked on projects at Hanford Site and for various commercial nuclear facilities. His background includes preparation of safety basis documents, packaging and transportation of radioactive waste, and cost estimating for large nuclear projects.
Resume Leyla Clothier
Leyla Clothier has over 15 years of experience as a process engineer in water treatment, fertilizer production, oil and gas refining. She has expertise in plant design, construction, commissioning, process modeling, engineering reviews, and more. Currently she works as a manager at her own engineering consultancy, ProForte Engineering, providing services to several clients. Previously she has held process engineering roles for Origin Energy and other companies.
Resume
Erika Ayers Williams has over 10 years of experience as an engineer in the refined petroleum and natural gas industries. She has a B.S. in Civil & Environmental Engineering from Ohio State University. Her experience includes engineering support roles at Colonial Pipeline Company, Amec Foster Wheeler, and EQT Corporation. At Colonial Pipeline, she managed a tank fire prevention program and established emergency response relationships with first responders.
Recommended
Environmental revised 11-12
GSI Engineering provides a wide range of environmental services including site assessments, remediation, regulatory compliance, underground storage tank mitigation, waste management, and environmental consulting. Services include phase 1 and 2 site assessments, remedial action planning, regulatory audits, monitoring well installation, remedial system installation, aquifer evaluations, and waste characterization. GSI aims to serve as an advocate for clients by keeping up to date on regulatory trends and forecasting solutions.
Anderton 0615
Charles H. Anderton Jr. is a registered professional engineer in Michigan with over 25 years of experience in fields related to utility energy logistics, power plant operations, resource recovery technologies, construction inspection, environmental assessments, and storm water management. He has worked on projects involving power plants, landfills, composting facilities, and environmental cleanup sites. Currently, he is the president and founder of Blue Vector Engineering, P.C.
One-Page Red Hill SI RA modeling Omaha feb13
Cardno TEC was contracted to characterize historic fuel releases from the Navy Red Hill Fuel Storage Facility located on Oahu, Hawaii. The facility consists of 20 underground storage tanks constructed before WWII with a total capacity of 250 million gallons. Past investigations identified fuel releases impacting groundwater quality near a drinking water well. Cardno TEC installed monitoring wells and developed a 3D groundwater model to evaluate fuel transport. Their risk assessments found no imminent threat to water supply. They established long-term groundwater and soil vapor monitoring programs and a groundwater protection plan implemented since 2004.
EWSO
The document describes an Exploration Drilling Schedule Optimization System (EDSOS) that has two main components: 1) a Drilling Scheduler that allows users to manually drag and drop wells into time slots and runs optimization scenarios based on constraints, and 2) a Task Tracker that monitors well planning, approval, drilling, and post-drilling activities. The system facilitates real-time impact analysis and optimization of the drilling schedule to meet exploration objectives like replacing oil production and increasing gas reserves.
28 voelzke sorenson issues of ageing sand2016 8277 c
SNL and BAM collaborate on issues regarding extended interim storage of spent nuclear fuel. BAM research on metal seals, elastomer seals, and polymers does not indicate safety issues so far regarding long-term performance. SNL is focusing on closing the technical gap associated with high burnup fuel cladding through further mechanical testing, thermal analysis, and transportation loading tests.
ENeilsenresume- Dec2015PE
Erik Neilsen has over 25 years of experience in radioactive waste management, project management, safety analysis, waste characterization and regulatory compliance. He has worked on projects at Hanford Site and for various commercial nuclear facilities. His background includes preparation of safety basis documents, packaging and transportation of radioactive waste, and cost estimating for large nuclear projects.
Resume Leyla Clothier
Leyla Clothier has over 15 years of experience as a process engineer in water treatment, fertilizer production, oil and gas refining. She has expertise in plant design, construction, commissioning, process modeling, engineering reviews, and more. Currently she works as a manager at her own engineering consultancy, ProForte Engineering, providing services to several clients. Previously she has held process engineering roles for Origin Energy and other companies.
Resume
Erika Ayers Williams has over 10 years of experience as an engineer in the refined petroleum and natural gas industries. She has a B.S. in Civil & Environmental Engineering from Ohio State University. Her experience includes engineering support roles at Colonial Pipeline Company, Amec Foster Wheeler, and EQT Corporation. At Colonial Pipeline, she managed a tank fire prevention program and established emergency response relationships with first responders.
The Digital Oilfield - Collaborative Working at Global Scale
Collaborative Working helps assets to operate more efficiently and as one team, resulting in higher production, less cost, lower HSE exposure and higher morale. Shell has pursued the Digital Oilfield for the last fifteen years, under the heading of Smart Fields. Collaborative Work Environments (CWEs) were implemented in the majority of assets, live environments now cover over 60% of Shell’s production. The presentation will provide an overview of current Collaborative Work Environments. It will show examples of CWEs in different types of assets, and of the business value achieved. The large scale implementation was achieved through a structured deployment programme, taking assets and projects through a standard design, implementation and embedding approach. To embed and sustain the new ways of working, a focus on the people aspects and change management has been critical. Each project included process design, awareness and training sessions and establishing coaches, support and continuous improvement.
Frans van den Berg is currently an independent consultant in the design of Digital Oilfields and Collaborative Work Environments. He has worked 32 years in Shell, lastly in its global Smart Fields or Digital Oilfield program in the technology organisation in the Netherlands. There he led the global implementation of Collaborative Work Environments in Shell. He has held various positions as a petroleum engineer, head of petrohysics and asset development leader in operational roles and in global technology deployment. He worked ten years in Malaysia and Thailand. Frans has a PhD and a Master in Physics from Leiden University in the Netherlands. He has been involved in the organisation of the SPE Intelligent Energy and Digital Energy Conferences since 2008.
Vulnerability and Management of Water Injectors - Kazeem Lawal
The document discusses injectivity decline in water injectors. It provides an overview of the main mechanisms of impairment, including solids deposition, water quality issues, and reservoir/well factors. It also discusses options for monitoring injector health, such as pressure-transient analysis, and interventions like back-flushing or re-fracturing to restore injectivity. The key messages are that impairment is complex with multiple causes, but also predictable; mitigation strategies exist but may not always be economically viable; and proper planning, surveillance and considering multiple factors are important for project success.
RFSresume16v2
Richard Stoisits has over 42 years of experience in reservoir, production, operations and facility engineering. He currently works as a Senior Engineering Advisor for ExxonMobil, where he leads flow assurance studies for offshore developments and troubleshoots production problems for worldwide assets. Previously, he has held engineering roles at Raytheon Corporation, ARCO Exploration and Production Technology, and ARCO Oil & Gas. He has developed new technologies in areas such as multiphase flow, reservoir modeling, and production optimization.
Case studies: Predictive maintenance in the petrochemical industry
This document summarizes techniques used by Advisian to improve asset reliability and reduce maintenance costs for petrochemical clients. It provides five case studies where Advisian conducted reliability reviews that led to [1] an 88% reduction in instrument maintenance hours, [2] a 56% reduction in gas turbine maintenance costs, [3] improving a work management process that increased job completion from 30% to 70%, [4] reducing shutdown duration by 77% saving 44 production days, and [5] eliminating unplanned downtime and improving gas compressor availability by 75%. The case studies demonstrate Advisian's multi-disciplinary approach to reliability engineering.
Tabnak Drilling Management
This document provides an overview of the Coastal Fars Gas Fields project which involves developing gas fields through 3 land rigs over 2 years. It discusses the project coordination between NIOC-PEDEC and consortium partners for drilling, geology, logistics, and IT project management services. The geology section describes the stratigraphic analysis and well design process. Drilling operations and performance monitoring are discussed. Logistics involve maintaining sites, roads, and transport. The IT section outlines communications infrastructure between rig sites and offices including databases, networks, and reporting systems.
112020 cv sigve hamilton aspelund
Sigve Hamilton Aspelund is a Norwegian petroleum engineer with over 20 years of experience in oil and gas exploration, production, and consulting. He has worked on both onshore and offshore projects in Norway and internationally, holding roles in production engineering, reservoir engineering, project management, risk advisory, and teaching. Aspelund has a Master's degree in petroleum engineering and additional coursework in HSE, risk management, and geoscience.
DNV GL Asset Life Extension (ALE) Projects Showcase
The document discusses a phase 1 asset life extension study for a Vietnam offshore platform. The study will conduct jacket fatigue analysis and pipeline condition assessments to provide recommendations for life extensions. It will also review topside equipment data and define gaps based on redefined operational requirements. The phase 1 deliverables will include requirements for subsea inspections to allow time for planning underwater inspections.
Microsoft - Caso Di Successo Fomap Precision Mechanics Snc
Connettere persone, processi e informazioni.
Ecco come un’azienda specializzata in meccanica di precisione rivoluziona la gestione dei dati, trasforma il modo di condividere la conoscenza tra Amministrazione e Produzione e consegna alla proprietà nuovi strumenti di analisi del business intuitivi e rapidi.
Tutto con tecnologia Microsoft.
Microsoft - Caso Di Successo Gruppo Tacconi Spa
La scelta di una soluzione di Business Intelligence sviluppata su Microsoft SQL Server e Microsoft SharePoint Server ha determinato la completa visibilità
sui dati di produzione, realizzando un sistema di supporto decisionale e condivisione personalizzata delle informazioni che semplifica la gestione
e contribuisce a mantenere sotto controllo i margini di profitto su tutte le tipologie di commessa.
Solar System
The document summarizes key facts about the solar system. It describes the 8 planets that orbit the sun, with basic details provided about each planet's position from the sun, time to orbit the sun, characteristics, and number of moons. The sun is identified as comprising 98% of the mass in the solar system and being at the center. Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune are each briefly characterized along with images. Pluto is noted as a dwarf planet. Sources are cited at the end.
Folder Drainagetechniek En Geohydrologie
Twee cursussen: geohydrologie en drainagetechniek in samenwerking met Eurecom en Landslide
Hiding sensitive association_rule.pdf.
The document discusses hiding sensitive association rules in data mining. It proposes an approach that alters the position of sensitive items in transactions while keeping their overall support unchanged. This is unlike existing approaches that increase or decrease the size of the database or support of sensitive items. The key advantages are hiding more rules with fewer alterations while preserving the support of sensitive items and database size. An algorithm is presented and example demonstrations are provided. The performance is compared to prior approaches.
2004 January - Integrated Permit Planning
Presentation at January 2004 CADER (California Alliance for Distributed Energy Resources) Conference. Perspective on air quality permitting process and approach.
2004 May - Demystifying the Air Permitting Process
The document summarizes the air permitting process for distributed generation projects. It outlines the key steps, which include early project planning, determining regulatory requirements, completing permit applications, negotiating permit conditions, conducting emissions testing, and ensuring ongoing compliance. The process involves both an application phase of 6 steps to obtain permits, as well as a compliance demonstration phase of another 6 steps to maintain permits once operational. Close coordination with regulatory agencies and thorough preparation are emphasized to successfully navigate air quality permitting.
Who Is Talon/LPE?
Talon/LPE is an environmental consulting firm that provides a wide range of environmental services including subsurface investigations, remediation, engineering, drilling, and safety training. They have over 1,500 contaminated site experience, installed over 10,000 monitoring wells, and performed over 450,000 samples. They utilize in-house resources and expertise to provide cost-effective solutions to clients.
GEHS CORP Presentation
GEHS Corp is a company dedicated to providing health, safety, and environmental services for construction projects. It aims to help clients comply with all relevant laws and regulations. The company's president is Griselle Figueroa Ortiz and services include preparing environmental permits, conducting safety inspections, implementing erosion and sedimentation controls, and ensuring compliance with environmental standards. Past projects the company has worked on involve infrastructure, flood control, and military base renovations.
Mira Abdelaziz resume
Mira Abdelaziz has over 15 years of experience in environmental consulting and project management. She has expertise in all phases of investigation and remediation projects including budgeting, subcontractor management, sampling, construction oversight, and health and safety compliance. Some of her project experience includes managing large scale residential development and infrastructure projects for the MTA, NJDOT, NYC Build It Back Program, and private developers.
On Farm Anaerobic Digestion: Making a succesful planning application - Gillia...
This presentation formed part of the Farming Futures "Farm Biogas Developer: Expert workshop"
30th June 2009
KJGResume2015
Jeffrey Glenn has over 30 years of experience in engineering, environmental compliance, and management. He has a background in petroleum and environmental engineering and has worked in various roles related to air quality permitting and compliance, including as an environmental engineer, air permitting consultant, and EH&S manager. His experience spans industries such as oil and gas production, midstream operations, the Air Force, and research and development facilities.
The permitting advantages and challenges of green infrastructure
The permitting advantages and challenges of green infrastructureSouthern New England American Planning Association
This document discusses the permitting process and construction of a green infrastructure project in Hingham and Rockland, Massachusetts. It describes the various local and state permits required, including orders of conditions from conservation commissions and special permits from planning boards. Both towns required design changes during permitting, such as increasing stormwater infiltration systems. Construction involved careful installation of porous asphalt, bioretention areas, and wetland replication. Post-construction maintenance includes inspections and vacuuming of porous pavement to ensure long-term stormwater management.Sanitary Engineered Landfill Processes
This document outlines the key processes and activities involved in sanitary engineered landfill operations including: construction activities like earthworks, geosynthetic installation and final capping; operation activities like waste deposition, leachate and gas management; environmental monitoring of groundwater, surface water, leachate and gas; planning and design of the landfill layout and systems; and maintenance.
More Related Content
What's hot
The Digital Oilfield - Collaborative Working at Global Scale
Collaborative Working helps assets to operate more efficiently and as one team, resulting in higher production, less cost, lower HSE exposure and higher morale. Shell has pursued the Digital Oilfield for the last fifteen years, under the heading of Smart Fields. Collaborative Work Environments (CWEs) were implemented in the majority of assets, live environments now cover over 60% of Shell’s production. The presentation will provide an overview of current Collaborative Work Environments. It will show examples of CWEs in different types of assets, and of the business value achieved. The large scale implementation was achieved through a structured deployment programme, taking assets and projects through a standard design, implementation and embedding approach. To embed and sustain the new ways of working, a focus on the people aspects and change management has been critical. Each project included process design, awareness and training sessions and establishing coaches, support and continuous improvement.
Frans van den Berg is currently an independent consultant in the design of Digital Oilfields and Collaborative Work Environments. He has worked 32 years in Shell, lastly in its global Smart Fields or Digital Oilfield program in the technology organisation in the Netherlands. There he led the global implementation of Collaborative Work Environments in Shell. He has held various positions as a petroleum engineer, head of petrohysics and asset development leader in operational roles and in global technology deployment. He worked ten years in Malaysia and Thailand. Frans has a PhD and a Master in Physics from Leiden University in the Netherlands. He has been involved in the organisation of the SPE Intelligent Energy and Digital Energy Conferences since 2008.
Vulnerability and Management of Water Injectors - Kazeem Lawal
The document discusses injectivity decline in water injectors. It provides an overview of the main mechanisms of impairment, including solids deposition, water quality issues, and reservoir/well factors. It also discusses options for monitoring injector health, such as pressure-transient analysis, and interventions like back-flushing or re-fracturing to restore injectivity. The key messages are that impairment is complex with multiple causes, but also predictable; mitigation strategies exist but may not always be economically viable; and proper planning, surveillance and considering multiple factors are important for project success.
RFSresume16v2
Richard Stoisits has over 42 years of experience in reservoir, production, operations and facility engineering. He currently works as a Senior Engineering Advisor for ExxonMobil, where he leads flow assurance studies for offshore developments and troubleshoots production problems for worldwide assets. Previously, he has held engineering roles at Raytheon Corporation, ARCO Exploration and Production Technology, and ARCO Oil & Gas. He has developed new technologies in areas such as multiphase flow, reservoir modeling, and production optimization.
Case studies: Predictive maintenance in the petrochemical industry
This document summarizes techniques used by Advisian to improve asset reliability and reduce maintenance costs for petrochemical clients. It provides five case studies where Advisian conducted reliability reviews that led to [1] an 88% reduction in instrument maintenance hours, [2] a 56% reduction in gas turbine maintenance costs, [3] improving a work management process that increased job completion from 30% to 70%, [4] reducing shutdown duration by 77% saving 44 production days, and [5] eliminating unplanned downtime and improving gas compressor availability by 75%. The case studies demonstrate Advisian's multi-disciplinary approach to reliability engineering.
Tabnak Drilling Management
This document provides an overview of the Coastal Fars Gas Fields project which involves developing gas fields through 3 land rigs over 2 years. It discusses the project coordination between NIOC-PEDEC and consortium partners for drilling, geology, logistics, and IT project management services. The geology section describes the stratigraphic analysis and well design process. Drilling operations and performance monitoring are discussed. Logistics involve maintaining sites, roads, and transport. The IT section outlines communications infrastructure between rig sites and offices including databases, networks, and reporting systems.
112020 cv sigve hamilton aspelund
Sigve Hamilton Aspelund is a Norwegian petroleum engineer with over 20 years of experience in oil and gas exploration, production, and consulting. He has worked on both onshore and offshore projects in Norway and internationally, holding roles in production engineering, reservoir engineering, project management, risk advisory, and teaching. Aspelund has a Master's degree in petroleum engineering and additional coursework in HSE, risk management, and geoscience.
DNV GL Asset Life Extension (ALE) Projects Showcase
The document discusses a phase 1 asset life extension study for a Vietnam offshore platform. The study will conduct jacket fatigue analysis and pipeline condition assessments to provide recommendations for life extensions. It will also review topside equipment data and define gaps based on redefined operational requirements. The phase 1 deliverables will include requirements for subsea inspections to allow time for planning underwater inspections.
What's hot (7)
The Digital Oilfield - Collaborative Working at Global Scale
The Digital Oilfield - Collaborative Working at Global Scale
Vulnerability and Management of Water Injectors - Kazeem Lawal
Vulnerability and Management of Water Injectors - Kazeem Lawal
Case studies: Predictive maintenance in the petrochemical industry
Case studies: Predictive maintenance in the petrochemical industry
DNV GL Asset Life Extension (ALE) Projects Showcase
DNV GL Asset Life Extension (ALE) Projects Showcase
Viewers also liked
Microsoft - Caso Di Successo Fomap Precision Mechanics Snc
Connettere persone, processi e informazioni.
Ecco come un’azienda specializzata in meccanica di precisione rivoluziona la gestione dei dati, trasforma il modo di condividere la conoscenza tra Amministrazione e Produzione e consegna alla proprietà nuovi strumenti di analisi del business intuitivi e rapidi.
Tutto con tecnologia Microsoft.
Microsoft - Caso Di Successo Gruppo Tacconi Spa
La scelta di una soluzione di Business Intelligence sviluppata su Microsoft SQL Server e Microsoft SharePoint Server ha determinato la completa visibilità
sui dati di produzione, realizzando un sistema di supporto decisionale e condivisione personalizzata delle informazioni che semplifica la gestione
e contribuisce a mantenere sotto controllo i margini di profitto su tutte le tipologie di commessa.
Solar System
The document summarizes key facts about the solar system. It describes the 8 planets that orbit the sun, with basic details provided about each planet's position from the sun, time to orbit the sun, characteristics, and number of moons. The sun is identified as comprising 98% of the mass in the solar system and being at the center. Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune are each briefly characterized along with images. Pluto is noted as a dwarf planet. Sources are cited at the end.
Folder Drainagetechniek En Geohydrologie
Twee cursussen: geohydrologie en drainagetechniek in samenwerking met Eurecom en Landslide
Hiding sensitive association_rule.pdf.
The document discusses hiding sensitive association rules in data mining. It proposes an approach that alters the position of sensitive items in transactions while keeping their overall support unchanged. This is unlike existing approaches that increase or decrease the size of the database or support of sensitive items. The key advantages are hiding more rules with fewer alterations while preserving the support of sensitive items and database size. An algorithm is presented and example demonstrations are provided. The performance is compared to prior approaches.
Viewers also liked (6)
Microsoft - Caso Di Successo Fomap Precision Mechanics Snc
Microsoft - Caso Di Successo Fomap Precision Mechanics Snc
Similar to Process And Chemial Industry Soil
2004 January - Integrated Permit Planning
Presentation at January 2004 CADER (California Alliance for Distributed Energy Resources) Conference. Perspective on air quality permitting process and approach.
2004 May - Demystifying the Air Permitting Process
The document summarizes the air permitting process for distributed generation projects. It outlines the key steps, which include early project planning, determining regulatory requirements, completing permit applications, negotiating permit conditions, conducting emissions testing, and ensuring ongoing compliance. The process involves both an application phase of 6 steps to obtain permits, as well as a compliance demonstration phase of another 6 steps to maintain permits once operational. Close coordination with regulatory agencies and thorough preparation are emphasized to successfully navigate air quality permitting.
Who Is Talon/LPE?
Talon/LPE is an environmental consulting firm that provides a wide range of environmental services including subsurface investigations, remediation, engineering, drilling, and safety training. They have over 1,500 contaminated site experience, installed over 10,000 monitoring wells, and performed over 450,000 samples. They utilize in-house resources and expertise to provide cost-effective solutions to clients.
GEHS CORP Presentation
GEHS Corp is a company dedicated to providing health, safety, and environmental services for construction projects. It aims to help clients comply with all relevant laws and regulations. The company's president is Griselle Figueroa Ortiz and services include preparing environmental permits, conducting safety inspections, implementing erosion and sedimentation controls, and ensuring compliance with environmental standards. Past projects the company has worked on involve infrastructure, flood control, and military base renovations.
Mira Abdelaziz resume
Mira Abdelaziz has over 15 years of experience in environmental consulting and project management. She has expertise in all phases of investigation and remediation projects including budgeting, subcontractor management, sampling, construction oversight, and health and safety compliance. Some of her project experience includes managing large scale residential development and infrastructure projects for the MTA, NJDOT, NYC Build It Back Program, and private developers.
On Farm Anaerobic Digestion: Making a succesful planning application - Gillia...
This presentation formed part of the Farming Futures "Farm Biogas Developer: Expert workshop"
30th June 2009
KJGResume2015
Jeffrey Glenn has over 30 years of experience in engineering, environmental compliance, and management. He has a background in petroleum and environmental engineering and has worked in various roles related to air quality permitting and compliance, including as an environmental engineer, air permitting consultant, and EH&S manager. His experience spans industries such as oil and gas production, midstream operations, the Air Force, and research and development facilities.
The permitting advantages and challenges of green infrastructure
The permitting advantages and challenges of green infrastructureSouthern New England American Planning Association
This document discusses the permitting process and construction of a green infrastructure project in Hingham and Rockland, Massachusetts. It describes the various local and state permits required, including orders of conditions from conservation commissions and special permits from planning boards. Both towns required design changes during permitting, such as increasing stormwater infiltration systems. Construction involved careful installation of porous asphalt, bioretention areas, and wetland replication. Post-construction maintenance includes inspections and vacuuming of porous pavement to ensure long-term stormwater management.Sanitary Engineered Landfill Processes
This document outlines the key processes and activities involved in sanitary engineered landfill operations including: construction activities like earthworks, geosynthetic installation and final capping; operation activities like waste deposition, leachate and gas management; environmental monitoring of groundwater, surface water, leachate and gas; planning and design of the landfill layout and systems; and maintenance.
Land Contamination Management & Site Remediation
This document discusses land contamination management and site remediation. It defines land contamination and outlines some of the health effects of exposure to contaminated land, such as increased risk of cancer, kidney damage, and neuromuscular issues. The document then describes the typical steps involved in site remediation, including risk assessment, options appraisal, implementation of remediation strategies, and verification plans. It also discusses various remediation technologies like excavation, solidification and stabilization, pump and treat, and soil vapor extraction. The role of public interest litigation in addressing land contamination issues in India is also mentioned.
Managing environmental risk for road & bridge projects in California
The process of managing hazardous materials risks during road and bridge construction projects in California - especially those projects where Caltrans is involved.
3 swpp ps for const sites tonning ksa apr 2010
The document discusses requirements for Stormwater Pollution Prevention Plans (SWPPPs) for construction sites in Kentucky under the KPDES MS4 permit program. It provides an overview of what SWPPPs must include such as identifying pollutant sources, describing erosion and sediment controls, and procedures for inspections and record keeping. It also summarizes requirements for permit coverage, buffer zones, impaired waters, and components of the required site map.
Stormwater Regulation In Wa April 2010
Washington State Stormwater Regulation and Compliance for Industrial and Construction Sites. From a CLE presentation I gave on April 27, 2010 in Seattle.
Iso 14001 aspect impact management
This document identifies and assesses environmental aspects and impacts from processes at an HPM Chemicals & Fertilizers plant. It lists various process activities, the associated aspects that could pollute the environment, potential impacts, an SSPD rating to determine significance, and actions to address significant impacts. Monitoring of air, ETP, and water quality is also included. The core team is identified and responsibilities are assigned to address issues, implement control plans, and conduct regular reviews to minimize environmental impacts and ensure compliance.
Iso 14001 aspect impact management
This document assesses environmental aspects and impacts from operations at an HPM Chemicals & Fertilizers plant. It identifies 8 processes that could pollute the air, soil, water or generate noise. For each process, it evaluates the severity of impact, probability of occurrence, detection difficulty and calculates an SSPD rating. Processes with SSPD over 100 are considered significant. Two processes - emissions to air from manufacturing and stack emissions - were found significant. The document lists actions already taken like installing scrubbers and conducting monitoring. It also identifies responsibilities and status of addressing significant aspects to reduce environmental impacts from plant operations.
Oregon Agricultural Water Law
The document discusses developing and protecting agricultural water rights in Oregon. It provides an overview of Oregon water law, including the principles of priority, beneficial use, appurtenance, and use it or lose it. It describes the types of agricultural water rights and how to obtain new water rights or make changes to existing rights. It also discusses issues to consider when evaluating existing water rights, such as reliability, availability, and shared facilities agreements.
Allied Rubber and Plastics SWPPP DOC
This document provides details on the Storm Water Pollution Prevention Program for Allied Rubber and Plastics, including facility information, contact details, potential pollutant sources, and control measures. It identifies the facility location in Houston, Texas, applicable industrial sectors and permits. It also lists the SWPPP team members and their duties, describes the industrial activities and associated pollutants present, approved non-stormwater discharges, sampling data and best management practices implemented to comply with permit limits.
The GBHE Project Experience
The document outlines the services provided by a licensed contractor for catalyst process technology projects. The contractor will conduct a paid study that includes flowsheet heat and mass balance, layout, heat integration, sanction grade estimate, and project guarantees. They will provide detailed engineering and design, commissioning support, and advise on all aspects of catalyst process technology selection and implementation. The contractor offers a wide range of engineering services to support the design, construction, and commissioning of process technology projects.
air-permiting-considerations
This document provides a summary of a presentation given by Shirley F. Rivera of the EPA Region 9 Air Permits Office about air permitting considerations for operating environmentally friendly tribal casinos. The presentation covered the regulatory landscape for air quality permits, common air pollutant emitting activities at casinos, green opportunities and alternatives to reduce emissions, and an overview of the air quality permitting process. Recommendations included considering air quality impacts early in planning, using alternative energy sources where possible, and contacting the EPA air permits office for assistance.
abhinav rawat
Abhinav Rawat is a mechanical engineer with over 4 years of experience in project management, engineering, procurement, construction, and commissioning of power plants and petrochemical units. He is currently an Assistant Manager at Mekaster Eco System, where he oversees the erection and commissioning of vapor recovery units. His expertise includes piping, instrumentation, equipment erection, and ensuring adherence to safety standards on project sites.
Similar to Process And Chemial Industry Soil (20)
2004 May - Demystifying the Air Permitting Process
2004 May - Demystifying the Air Permitting Process
On Farm Anaerobic Digestion: Making a succesful planning application - Gillia...
On Farm Anaerobic Digestion: Making a succesful planning application - Gillia...
The permitting advantages and challenges of green infrastructure
The permitting advantages and challenges of green infrastructure
Managing environmental risk for road & bridge projects in California
Managing environmental risk for road & bridge projects in California