SlideShare a Scribd company logo
1 of 34
Download to read offline
I.C. ENGINE POWERED FORKLIFT TRUCK
Counter-Balance Type
1,5 - 3,5 ton
Havelange Forklifts,
Havelange Forklifts,
driven by service
driven by service www.havelangeforklifts.be
FG15C13 / FG15T13 / FHG15C3 / FHG15T3
FD15C13 / FD15T13 / FHD15C3 / FHD15T3 / FHD15C3Z / FHD15T3Z
FG18C13 / FG18T13 / FHG18C3 / FHG18T3
FD18C13 / FD18T13 / FHD18C3 / FHD18T3 / FHD18C3Z / FHD18T3Z
FG20C3 / FG20T3 / FHG20C3 / FHG20T3
FD20C3 / FD20T3 / FD20C3Z / FD20T3Z / FHD20C3 / FHD20T3
FG25C3 / FG25T3 / FHG25C3 / FHG25T3
FD25C3 / FD25T3 / FD25C3Z / FD25T3Z / FHD25C3 / FHD25T3
FG30C3 / FG30T3 / FHG30C3 / FHG30T3
FD30C3 / FD30T3 / FD30C3Z / FD30T3Z / FHD30C3 / FHD30T3
FD35T3S
ENHANCED OPERATOR COMFORT
SUBSTANTIALLY REDUCED VIBRATION BY
ADOPTING DUAL-FLOATING SYSTEMS FOR BOTH
THE ENGINE AND HOOD
Minimizes the transfer of vibration to the operator, with four-
point rubber cushion absorbers between the seat and engine
and its transmission. Moreover, use of the same four-point
suspension adopted in the hood, realizing a dual effect in
reducing vehicle vibrations.
GENERAL
EXPANSIVE FLOOR SPACE FOR EASIER FOOT
MANEUVERING
An amazing 45% increase in floor space by placing tilt cylinders
under the floor. This gives a smooth footwell in addition to easy
entry and exit.
MORE CONVENIENT PARKING
LEVER
The lever is positioned to the right of
the steering wheel for easier entry
and exit.
A double-action brake release on the
lever further improves safety.
EXTRA ENTRY AND EXIT FROM AN
EXTRA-WIDE STEP -- 55% WIDER
The secure step with enlarged foot
space enables greater comfort and less
fatigue while entering and exiting the
vehicle.
MULTIFUNCTIONAL SUSPENSION SEAT (available for
1.5/1.8 ton high power & 2/3.5 ton models)
Features include reinforced driver support, reduced vibration,
operator weight balance adjusting, forward and backward
reclining, a rear utility pocket and seat belt.
RESIN SCREEN
The resin screen on the overhead
guard enables comfortable outdoor
operation in wet weather.
SUPERIOR MANEUVERABILITY AND ASSURED SAFETY
INNOVATIVE FORK-LANDING MECHANISM
(available for wide view two-stage mast)
The fork-lowering speed decelerates at a height of
approximately 150mm above the ground enabling accurate
placement of the forks into the load fork pockets or pallet.
REDUCED FATIGUE DUE TO A SEMI-CIRCULAR STEERING WHEEL
A smaller diameter (300mm outer diameter) steering wheel gives
improved vehicle maneuverability. In addition, this compact steering wheel
makes it much easier to get on and off the truck.
METER PANEL OPTIMALLY
LOCATED TO THE RIGHT
OF THE DRIVER’S SEAT
The meter panel is located
on the top right side of
the dashboard for easier
readability by the operator.
MULTI-CONE SYNCHRONIZER SHIFT LEVERS
The newly adopted levers enable smooth shifting from
both forward and
reverse (available for
manual transmission
models).
ANTI-ROLL MECHANISM FOR ASSURED SAFETY DURING
TURNING (available for 2-3.5 ton models)
Warning: This system does not guarantee accident avoidance or
prevention of vehicle overturning.
NEUTRAL SAFETY MECHANISM
This feature enhances safety of
operation. The engine cannot be
started unless the change lever is
in the neutral position.
HIGH-MOUNT REAR COMBINATION
LIGHTS
The rear combination lights are installed
on the top left and right sides of the
overhead guard for easier recognition by
on-site workers.
ANTI-SLIP MAT ON THE
HOOD
A rubber strip is
attached to the hood to
prevent slippage while
stepping on and off.
METER PANEL WITH LCD
INDICATORS
The LCD has a longer life and is
easy to read even during daylight
shift operation.
EXCELLENT OPERATOR VISIBILITY
• Wider forward visibility
Clearer visibility of the fork tips
-- 50% improvement over other
current models. This achievement
was made possible by lowering
the dashboard by 70mm and the
tie bar by 190mm. A remarkable
improvement of the forward view
along with quicker recognition of
the fork position. An operator-
friendly design with assured safety,
high efficiency and relaxing feel.
• Amazing backward visibility
Reshaped counter weight for better rearview
sight. The round shape of the rear top end of the
counterweight
substantially
improves
visibility for
increased
safety during
backward
movement.
RUGGEDNESS AND INCREASED DURABILITY
5% IMPROVED FRONT AND REAR STABILITY RATIO
(available for 2-3.5 ton models)
Stable and more consistent cargo handling as well as travel
due to an improved stability ratio.
STURDIER MAST
Minimized distortion of the mast by redesigned
positioning the mast supports and tilt
cylinders. TCM’s traditional robust mast was
further upgraded by adopting sturdier tie bars,
while maintaining a wide range of viewing
angles.
IMPROVED DURABILITY WITH LUBRICANT
FILLED LIFT CYLINDER
Oil filled lift cylinders give improved durability.
(available for 2-3.5 ton models)
SINGLE-PIECE HEADGUARD
The front and rear pillars as well
as roof are all welded together in
a single-piece construction to give
additional strenght to the entire
structure.
COOLER RUNNING THROUGH
IMPROVED AIRFLOW
Optimal positioning of the fan, radiator
and muffler has reduced the operating
coolant temperature (gasoline models).
The operating temperature of the
hydraulic oil has been reduced, also
by 10°C by upgrading the mechanical
components and circuitry.
TCM TRANSMISSIONS
TCM designed and developped
these transmissions for quiet
operation and maximum
durability, and TCM builds them
to insure the highest quality.
TCM STEERING AXLES
Also a new TCM design, the steer axle
has been strengthened and improved for
durability in demanding applications.
EASY MAINTENANCE AND ENVIRONMENT FRIENDLINESS
DETACHABLE SIDE COVERS FOR CONVENIENT
INSPECTION AND SIMPLE MAINTENANCE
Inspection and maintenance can more easily be performed due
to one-touch detachable side covers and a wide-opening hood.
INTEGRAL LAYOUT OF ELECTRICAL PARTS AND OTHER
SYSTEM DEVICES
Maintenance inspections can be performed more easily, as
electrical parts such as the fuse box, relay and battery are
neatly integrated into a conveniently compact area.
NEW ENGINES, COMPLIANT WITH WORLDWIDE 2nd
STAGE EMISSION REGULATIONS
Powerful, yet appropriate, diesel engines, compliant with
stringent global emissions regulations.
ONE-PIECE
FLOORBOARD
Gives more convenient
inspection and easier
maintenance, as the
one-piece floorboard
unit is easily detachable
without using any tools.
NEW OPTIONAL EQUIPMENT
• Three-stage mast with four-
cylinder mechanism (available
for 2-3 ton models)
The cylinders are
symmetrically located to the
left and right for improved
forward visibility.
• Integral Side Shifter
A major improvement in the
integral side shifter ensures
less load loss and improved
forward visibility.
• Low-noise mast (available for
2-3 ton models)
Reduced noise from the fork
and carriage significantly
reduces chain shudder.
• Lift Lock
With the engine is off, the forks cannot be lowered, even
when the operator is in the seat.
• Interlock System
This safety device allows traveling and loading/unloading only
when the operator is in the seat.
PORTABLE GLOVE BOX
Detachable and portable.
CUP HOLDER
Convenient for keeping cups, pens
and other small items.
OTHER OPTIONAL EQUIPMENT
Rotating warning light Rear working light Overhead exhaust system
Windshield wiper Cabin-panel type
(available for 2-3.5 ton models)
Heater
LPG exclusive/Dual fuel
(LPG/gasoline) package
Pre-cleaner engine air intake Steel cabin-enclosed type with air-cooler
(available for 2-3.5 ton models)
Head light guard Air Boss tire
* As far as the detailed optional
information is concerned, please refer to
the specification sheets.
For various types of attachments, please
also refer to the “attachment catalogue”
which is separately prepared from this
sales catalogue.
1,5 ton
FG15C13 FD15C13 FHD15C3
FG15T13 FD15T13 FHD15T3
FHG15C3 FHD15C3Z
FHG15T3 FHD15T3Z
1,8 ton
FG18C13 FD18C13 FHD18C3
FG18T13 FD18T13 FHD18T3
FHG18C3 FHD18C3Z
FHG18T3 FHD18T3Z
2,0 ton
FG20C3 FD20C3 FHD20C3
FG20T3 FD20T3 FHD20T3
FHG20C3 FD20C3Z
FHG20T3 FD20T3Z
2,5 ton
FG25C3 FD25C3 FHD25C3
FG25T3 FD25T3 FHD25T3
FHG25C3 FD25C3Z
FHG25T3 FD25T3Z
3,0 ton
FG30C3 FD30C3 FHD30C3
FG30T3 FD30T3 FHD30T3
FHG30C3 FD30C3Z
FHG30T3 FD30T3Z
3,5 ton
FD35T3S
TCM has been engaged in manufacturing various forklift truck
models that take into account the needs and requirements of our
valued cutomers. Now, TCM proudly presents the ‘iNOMA series’
with such benefits as enhanced operator comfort, superior safety
assurance, ruggedness and increased durability as well as easy
maintenance and envirnment friendliness. These notable benefits are
backed by TCM’s many years of experience and superb technological
innovations, and TCM is confident in placing the full ‘iNOMA series’
product line on variaus job sites in markets around the world.
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(1)
ServiceWeight (kg)
FG / D15T13
FG / D15C13
FG / D18T13
FG / D18C13
Lowered Raised with
Backrest
FG15T3
FG15C3
FG18T3
FG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2475 2505 2585 2635 2650 2730
VM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2490 2520 2600 2650 2665 2745
VM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2510 2540 2620 2670 2685 2765
VM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2525 2555 2635 2685 2700 2780
VM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2540 2570 2650 2700 2715 2795
VM375 1500 1500 1750 1750 3750 2370 4780
6 / 6
*6 / 12
2555 2585 2665 2715 2730 2810
VM400 1500 1500
1650
*1750
1650
*1750
4000 2545 5030
6 / 6
*6 / 12
2595 2625 2705 2755 2770 2850
VM425
1400
*1500
1400
*1500
1500
*1750
1500
*1750
4250 2670 5280
6 / 6
*6 / 12
2615 2645 2725 2775 2790 2870
VM450 1400 1400
1500
*1650
1500
*1650
4500 2795 5530
6 / 6
*6 / 12
2625 2655 2735 2785 2800 2880
VM475
1000
*1350
1000
*1350
1000
*1500
1000
*1500
4750 2920 5780
6 / 6
*6 / 6
2540 2670 2750 2800 2815 2895
VM500
1000
*1350
1000
*1350
1000
*1500
1000
*1500
5000 3045 6030
6 / 6
*6 / 6
2660 2690 2770 2820 2835 2915
VM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2715 2745 2825 2875 2890 2970
VM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2745 2775 2855 2905 2920 3000
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(1)
ServiceWeight (kg)
FHG15T13 / FHD15T3Z
FHG15C13 / FHD15C3Z
FHG18T13 / FHD18T3Z
FHG18C13 / FHD18C3Z
Lowered
Raised with
Backrest
FHG15T3
FHG15C3
FHG18T3
FHG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2475 2505 2585 2635 2650 2730
VM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2490 2520 2600 2650 2665 2745
VM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2510 2540 2620 2670 2685 2765
VM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2525 2555 2635 2685 2700 2780
VM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2540 2570 2650 2700 2715 2795
VM375 1500 1500 1750 1750 3750 2370 4780
6 / 6
*6 / 12
2555 2585 2665 2715 2730 2810
VM400 1500 1500
1650
*1750
1650
*1750
4000 2545 5030
6 / 6
*6 / 12
2595 2625 2705 2755 2770 2850
VM425
1400
*1500
1400
*1500
1500
*1750
1500
*1750
4250 2670 5280
6 / 6
*6 / 12
2615 2645 2725 2775 2790 2870
VM450 1400 1400
1500
*1650
1500
*1650
4500 2795 5530
6 / 6
*6 / 12
2625 2655 2735 2785 2800 2880
VM475
1000
*1350
1000
*1350
1000
*1500
1000
*1500
4750 2920 5780
6 / 6
*6 / 6
2540 2670 2750 2800 2815 2895
VM500
1000
*1350
1000
*1350
1000
*1500
1000
*1500
5000 3045 6030
6 / 6
*6 / 6
2660 2690 2770 2820 2835 2915
VM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2715 2745 2825 2875 2890 2970
VM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2745 2775 2855 2905 2920 3000
SPECIFICATIONS -- 1,5 - 1,8 ton
Wide view Mast VM
NOTE: (1)
Weight for diesel model: +30kg
NOTE: (1)
Weight for diesel model: +110kg (TD 27)
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(3)
ServiceWeight (kg)
FG / D15T13
FG / D15C13
FG / D18T13
FG / D18C13
(1)
Lowered
(2)
Raised with
Backrest
FG15T3
FG15C3
FG18T3
FG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VFM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2510 2540 2620 2670 2685 2765
VFM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2525 2555 2635 2685 2700 2780
VFM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2545 2575 2655 2705 2720 2800
VFM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2565 2595 2675 2725 2740 2820
VFM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2575 2605 2685 2735 2750 2830
VFM375 1500 1500 1750 1750 3750 2370 4780
6 / 6
*6 / 12
2590 2620 2700 2750 2765 2845
VFM400 1500 1500
1650
*1750
1650
*1750
4000 2545 5030
6 / 6
*6 / 12
2640 2670 2750 2800 2815 2895
VFM425
1400
*1500
1400
*1500
1500
*1750
1500
*1750
4250 2670 5280
6 / 6
*6 / 12
2660 2690 2770 2820 2835 2915
VFM450 1400 1400
1500
*1650
1500
*1650
4500 2795 5530
6 / 6
*6 / 12
2675 2705 2785 2835 2850 2930
VFM475
1000
*1350
1300
*1350
1000
*1500
1300
*1500
4750 2920 5780
6 / 6
*6 / 6
2690 2720 2800 2850 2865 2945
VFM500
1000
*1350
1200
*1350
1000
*1500
1200
*1500
5000 3045 6030
6 / 6
*6 / 6
2705 2735 2815 2865 2880 2960
VFM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2765 2795 2875 2925 2940 3020
VFM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2800 2830 2910 2960 2975 3055
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(3)
ServiceWeight (kg)
FHG15T13 / FHD15T3Z
FHG15C13 / FHD15C3Z
FHG18T13 / FHD18T3Z
FHG18C13 / FHD18C3Z
(1)
Lowered
(2)
Raised with
Backrest
FHG15T3
FHG15C3
FHG18T3
FHG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VFM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2510 2540 2620 2670 2685 2765
VFM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2525 2555 2635 2685 2700 2780
VFM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2545 2575 2655 2705 2720 2800
VFM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2565 2595 2675 2725 2740 2820
VFM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2575 2605 2685 2735 2750 2830
VFM375 1500 1500 1750 1750 3750 2370 4780
6 / 6
*6 / 12
2590 2620 2700 2750 2765 2845
VFM400 1500 1500
1650
*1750
1650
*1750
4000 2545 5030
6 / 6
*6 / 12
2640 2670 2750 2800 2815 2895
VFM425
1400
*1500
1400
*1500
1500
*1750
1500
*1750
4250 2670 5280
6 / 6
*6 / 12
2660 2690 2770 2820 2835 2915
VFM450 1400 1400
1500
*1650
1500
*1650
4500 2795 5530
6 / 6
*6 / 12
2675 2705 2785 2835 2850 2930
VFM475
1000
*1350
1300
*1350
1000
*1500
1300
*1500
4750 2920 5780
6 / 6
*6 / 6
2690 2720 2800 2850 2865 2945
VFM500
1000
*1350
1200
*1350
1000
*1500
1200
*1500
5000 3045 6030
6 / 6
*6 / 6
2705 2735 2815 2865 2880 2960
VFM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2765 2795 2875 2925 2940 3020
VFM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2800 2830 2910 2960 2975 3055
Wide view Full Free 2-stage Mast VFM
NOTE: (1)
For height without backrest: -470mm.
(2)
For free lift without backrest: +470mm.
Weight for without backrest: -20kg.
(3)
Weight for diesel model: +30kg
NOTE: (1)
For height without backrest: -470mm.
(2)
For free lift without backrest: +470mm.
Weight for without backrest: -20kg.
(3)
Weight for diesel model: +110kg (TD27)
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(3)
ServiceWeight (kg)
FHG15T13 / FHD15T3Z
FHG15C13 / FHD15C3Z
FHG18T13 / FHD18T3Z
FHG18C13 / FHD18C3Z
(1)
Lowered
(2)
Raised with
Backrest
FHG15T3
FHG15C3
FHG18T3
FHG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VFHM360 1400 1400 1600 1600 3600 1745 4630 6 / 6 2635 2665 2745 2795 2810 2890
VFHM400 1400 1400 1600 1600 4000 1870 5030 6 / 6 2660 2690 2770 2820 2835 2915
VFHM435
1350
*1400
1350
*1400
1550
*1600
1600
*1600
4350 1995 5380
6 / 6
*6 / 6
2685 2715 2795 2845 2860 2940
VFHM480
1300
*1350
1350
*1350
1400
*1550
1450
*1550
4800 2145 5830
6 / 6
*6 / 6
2710 2740 2820 2870 2885 2965
VFHM500
1100
*1300
1300
*1300
1150
*1500
1350
*1500
5000 2245 6030
6 / 6
*6 / 6
2730 2760 2840 2890 2905 2985
VFHM540
850
*1250
1100
*1250
900
*1400
1100
*1400
5400 2370 9430
3 / 6
*3 / 6
2750 2780 2860 2910 2925 3005
VFHM600
550
*1100
750
*1100
550
*1250
750
*1250
6000 2595 7030
3 / 6
*3 / 6
2815 2845 2925 2975 2990 3070
VFHM650 *950 *950 *1100 *1100 6500 2810 7530 *3 / 3 2860 2890 2970 3020 3035 3115
VFHM700 *750 *750 *750 *750 7000 3030 8030 *3 / 3 2900 2930 3010 3060 3075 3155
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(3)
ServiceWeight (kg)
FG / D15T13
FG / D15C13
FG / D18T13
FG / D18C13
(1)
Lowered
(2)
Raised with
Backrest
FG15T3
FG15C3
FG18T3
FG18C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VFHM360 1400 1400 1600 1600 3600 1745 4630 6 / 6 2635 2665 2745 2795 2810 2890
VFHM400 1400 1400 1600 1600 4000 1870 5030 6 / 6 2660 2690 2770 2820 2835 2915
VFHM435
1350
*1400
1350
*1400
1550
*1600
1600
*1600
4350 1995 5380
6 / 6
*6 / 6
2685 2715 2795 2845 2860 2940
VFHM480
1300
*1350
1350
*1350
1400
*1550
1450
*1550
4800 2145 5830
6 / 6
*6 / 6
2710 2740 2820 2870 2885 2965
VFHM500
1100
*1300
1300
*1300
1150
*1500
1350
*1500
5000 2245 6030
6 / 6
*6 / 6
2730 2760 2840 2890 2905 2985
VFHM540
850
*1250
1100
*1250
900
*1400
1100
*1400
5400 2370 9430
3 / 6
*3 / 6
2750 2780 2860 2910 2925 3005
VFHM600
550
*1100
750
*1100
550
*1250
750
*1250
6000 2595 7030
3 / 6
*3 / 6
2815 2845 2925 2975 2990 3070
VFHM650 *950 *950 *1100 *1100 6500 2810 7530 *3 / 3 2860 2890 2970 3020 3035 3115
VFHM700 *750 *750 *750 *750 7000 3030 8030 *3 / 3 2900 2930 3010 3060 3075 3155
NOTE: (1)
For height without backrest: -505mm.
(2)
For free lift without backrest: +500mm.
Weight without backrest: -20kg.
(3)
Weight for diesel model: +30kg
NOTE: (1)
For height without backrest: -505mm.
(2)
For free lift without backrest: +500mm.
Weight without backrest: -20kg.
(3)
Weight for diesel model: +110kg (TD27)
Wide view Full Free 3-stage Mast VFHM
NOTE: Rated Capacity with (*): Shows capacity with front dual tires.
Service Weight of VM/VFM 550 - 600 and of VFHM 650 - 700 represents the weight of vehicles equipped with “special dual tires”.
Lifting Speed withVFM/VFHM Mast:
For FG/FD15T13 - FG/FD15C13 - FG/FD18T3 - FG/FD18C3 - FG15T3/C3 - FG18T3/C
withVFM FG 470mm/s with load. 550mm/s without load.
FD 420mm/s with load. 490mm/s without load.
withVFHM FG 530mm/s with load. 610mm/s without load.
FD 480mm/s with load. 540mm/s without load.
For FHG15T3/C - FHD15T3Z/C3Z - FHG18T3/C3 - FHD18T3Z/C3Z - FHG15T3/C3 - FHG18T3/C
withVFM FG 480mm/s with load. 560mm/s without load.
FD 420mm/s with load. 540mm/s without load.
withVFHM FG 540mm/s with load. 620mm/s without load.
FD 560mm/s with load. 600mm/s without load.
Lowering speed withVFM/VFHM mast: 420mm/s with load. 370mm/s without load.
OverallVehicle lenght withVFM mast: +10mm longer than of STD model withVM mast
withVFHM mast: +25mm longer than of STD model withVM mast
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height Tilting
Angle
F / B
(3)
ServiceWeight (kg)
FG / FD 20 FG / FD 25 Lowered
(1)
Raised with
Backrest
FG / FD 20 FG / FD 25
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD
VM250 2000 2000 2500 2500 2500 1780 3530 6 / 10 3170 3275 3290 3530 3635 3650
VM270 2000 2000 2500 2500 2700 1880 3730 6 / 10 3185 3290 3305 3545 3650 3665
VM300 2000 2000 2500 250 3000 2030 4030 6 / 12 3210 3315 3330 3570 3675 3690
VM330 2000 2000 2500 2500 3300 2180 4330 6 / 12 3235 3340 3355 3595 3700 3715
VM350 2000 2000 2500 2500 3500 2280 4530 6 / 12 3250 3355 3370 3610 3715 3730
VM375 2000 2000 2500 2500 3750 2405 4780
6 / 6
*6 / 12
3270 3375 3390 3630 3735 3750
VM400 2000 2000 2500 2500 4000 2580 5030
6 / 6
*6 / 12
3325 3430 3445 3685 3790 3805
VM425
1950
*2000
1950
*2000
2450
*2500
2450
*2500
4250 2705 5280
6 / 6
*6 / 12
3345 3450 3465 3705 3810 3825
VM450
1900
*1950
1900
*1950
2150
*2450
2350
*2450
4500 2830 5530
6 / 6
*6 / 12
3365 3470 3485 3725 3830 3845
VM475
1800
*1850
1800
*1850
1850
*2350
2200
*2350
4750 2955 5780
6 / 6
*6 / 6
3385 3490 3505 3745 3850 3865
VM500
1650
*1700
1650
*1700
1700
*2250
2000
*2250
5000 3080 6030
6 / 6
*6 / 6
3405 3510 3525 3765 3870 3885
VM550 *1500 *1500 *1700 *1700 5500 3380 6530 *3 / 6 3480 3585 3600 3840 3945 3960
VM600 *1300 *1300 *1400 *1400 6000 3630 7030 *3 / 6 3520 3625 3640 3880 3985 4000
SPECIFICATIONS -- 2 - 2,5 - 3 ton
Wide view Mast VM
NOTE: (3) Weight for diesel model: +130kg (TD27) +110kg (C240)
Wide view Full Free 2-stage Mast VFM
NOTE: (1) For height without backrest: -385mm.
(2) For free lift without backrest: +385mm.
Weight without backrest: -20kg.
(3) Weight for diesel model: +130kg (TD27) +110kg(C240)
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D20 FG / D25
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle FG20 FG25
(3) ServiceWeight (kg)
(2) Free
Lift
with
Backrest
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD
VFM250 2000 2000 2500 2500 2500 1780 3530 780 6 - 10 3225 3330 3345 3585 3690 3705
VFM270 2000 2000 2500 2500 2700 1880 3730 880 6 - 10 3245 3350 3365 3605 3710 3725
VFM300 2000 2000 2500 2500 3000 2030 4030 1030 6 - 12 3270 3375 3390 3630 3735 3750
VFM330 2000 2000 2500 2500 3300 2180 4330 1180 6 - 12 3295 3400 3415 3655 3760 3775
VFM350 2000 2000 2500 2500 3500 2280 4530 1280 6 - 12 3310 3415 3430 3670 3775 3790
VFM375 2000 2000 2500 2500 3750 2405 4780 1405 6 - 6 3330 3435 3450 3690 3795 3810
*6 - 12
VFM400 2000 2000 2500 2500 4000 2580 5030 1580 6 - 6 3390 3495 3510 3750 3855 3870
*6 - 12
VFM425 1950 1950 2450 2450 4250 2705 5280 1705 6 - 6 3410 3515 3530 3770 3875 3890
*2000 *2000 *2500 *2500 *6 -12
VFM450 1900 1900 2150 2350 4500 2830 5530 1830 6 - 6 3435 3540 3555 3795 3900 3915
*1950 *1950 *2450 *2450 *6 - 12
VFM475 1800 1800 1850 2200 4750 2955 5780 1955 6 - 6 3455 3560 3575 3815 3920 3935
*1850 *1850 *2350 *2350 *6 - 6
VFM500 1650 1700 1700 2000 5000 3080 6030 2080 6 - 6 3475 3580 3595 3835 3940 3955
*1700 *2250 *2250 *6 - 6
VFM550 *1500 *1500 *1700 *1700 5500 3380 6530 2380 *3 - 6 3555 3660 3675 3915 4020 4035
VFM600 *1300 *1300 *1400 *1400 6000 3630 7030 2630 *3 - 6 3595 3700 3715 3955 4060 4075
NOTE: (1) For height without backrest: -455mm.
(2) For free lift without backrest: +455mm.
Weight without backrest: -20kg.
(3) Weight for diesel model: +130kg (TD27) +110kg(C240)
Wide view Full Free 3-stage Mast VFHM
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D20 FG / D25
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B
FG20 FG25
(3) ServiceWeight (kg)
(2) Free
Lift
with
Backrest
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Serves Weight ofVM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”.
Loading Speed withVFM/VFHM Mast: withVFM FG 480mm/s with load. 520mm/s without load.
FD 540mm/s with load. 590mm/s without load.
withVFHM FG 500mm/s with load. 540mm/s without load.
FD 560mm/s with load. 610mm/s without load.
Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load.
OverallVehicle lenght withVFHM mast: +15mm longer than that of STD model withVM/FM mast
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD
VFHM360 2000 2000 2500 2500 3600 1780 4630 780 6 - 6 3365 3470 3485 3725 3830 3845
*6 - 10
VFHM400 2000 2000 2500 2500 4000 1905 5030 905 6 - 6 3395 3500 3515 3755 3860 3875
*6 - 10
VFHM435 1900 1900 2200 2300 4350 2030 5380 1030 6 - 6 3425 3530 3545 3785 3890 3905
*2000 *2000 *2400 *2400 *6 - 10
VFHM480 1700 1800 1900 2200 4800 2180 5830 1180 6 - 6 3455 3560 3575 3815 3920 3935
*1900 *1900 *2300 *2300 *6 - 10
VFHM500 1500 1750 1600 2000 5000 2280 6030 1280 6 - 6 3480 3585 3600 3840 3945 3960
*1800 *1800 *2250 *2250 *6 - 10
VFHM540 1200 1650 1300 1700 5400 2405 6430 1405 3 - 6 3510 3615 3630 3870 3975 3990
*1750 *1750 *2150 *2150 *3 - 6
VFHM600 900 1100 950 1100 6000 2630 7030 1630 3 - 6 3605 3710 3725 3965 4070 4085
*1650 *1650 *1800 *1800 *3 - 6
VFHM650 *1500 *1500 *1550 *1550 6500 2845 7530 1845 *3 - 3 3660 3765 3780 4020 4125 4140
VFHM700 *1250 *1250 *1250 *1250 7000 3065 8030 2065 *3 - 3 3715 3820 3835 4075 4180 4195
NOTE: (1) For height without backrest: -455mm.
(2) For free lift without backrest: +455mm.
Weight without backrest: -20kg.
(3) Weight for diesel model: +130kg (TD27) +110kg(C240)
Wide view Full Free 3-stage Mast VFHW (4 CYLINDER)
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Lifting Speed withVFM/VFHM Mast: withVFM FG 450mm/s with load. 490mm/s without load.
FD 520mm/s with load. 570mm/s without load.
withVFHM FG 460mm/s with load. 510mm/s without load.
FD 540mm/s with load. 590mm/s without load.
Lowering speed withVFM/VFHM mast: 420mm/s with load. 380mm/s without load.
OverallVehicle lenght withVFW/VFHW (4CYLINDER) mast: +35mm longer than that of STD model withVM mast
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D20 FG / D25
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B
FG20 FG25
(3) ServiceWeight (kg)
(2) Free
Lift
with
Backrest
NOTE: (1) For height without backrest: -455mm.
(2) For free lift without backrest: +455mm.
Weight without backrest: -20kg.
(3) Weight for diesel model: +130kg (TD27) +110kg(C240)
Wide view Full Free 2-stage Mast VFW (4 CYLINDER)
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D20 FG / D25
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B
FG20 FG25
(3) ServiceWeight (kg)
(2) Free
Lift
with
Backrest
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD
VFW300 1900 1900 2400 2400 3000 2045 4030 1045 6 - 12 3280 3385 3505 3640 3745 3865
VFW330 1900 1900 2400 2400 3300 2195 4330 1195 6 - 12 3310 3415 3535 3670 3775 3895
VFW350 1900 1900 2400 2400 3500 2295 4530 1295 6 - 12 3325 3430 3550 3685 3790 3910
VFW375 1800 1800 2350 2350 3750 2420 4780 1420 *6 - 6 3350 3455 3575 3710 3815 3935
*1900 *1900 6 - 12
VFW400 1800 1800 2300 2300 4000 2595 5030 1595 *6 - 6 3410 3515 3635 3770 3875 3995
*1900 *1900 *2350 *2350 6 - 12
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD
VHW435 1800 1850 2200 2300 4350 2045 5380 1045 *6 - 6 3425 3530 3650 3785 3890 4010
*1900 *1900 *2400 *2400 6 - 10
VHW480 1700 1800 1900 2200 4800 2195 5830 1195 *6 - 6 3470 3575 3695 3830 3935 4055
*1900 *1900 *2300 *2300 6 - 10
VHW500 1500 1750 1600 2000 5000 2295 6030 1295 *6 - 6 3495 3600 3720 3855 3960 4080
*1800 *1800 *2250 *2250 6 - 10
VHW540 1200 1650 1300 1700 5400 2420 6430 1420 3 - 6 3520 3625 3745 3880 3985 4105
*1750 *1750 *2150 *2150
VHW550 1150 1600 1250 1600 5500 2460 6530 1460 3 - 6 3530 3635 3755 3890 3995 4115
*1750 *1750 *2100 *2100
NOTE: (3) Weight for diesel model: +140kg (TD27) +120kg (C240)
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D30
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B
(3) ServiceWeight (kg)
FG30
PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD
VM250 3000 3000 2500 1820 3760 6 - 10 4210 4245 4360
VM270 3000 3000 2700 1920 3960 6 - 10 4225 4260 4375
VM300 3000 3000 3000 2075 4260 6 - 12 4250 4285 4400
VM330 3000 3000 3300 2225 4560 6 - 12 4275 4310 4425
VM350 3000 3000 3500 2325 4760 6 - 12 4290 4325 4440
VM375 3000 3000 3750 2450 5010 6 - 6 4310 4345 4460
*6 - 12
VM400 3000 3000 4000 2625 5260 6 - 6 4370 4405 4520
*6 - 12
VM425 2900 3000 4250 2750 5510 6 - 6 4390 4425 4540
*3000 *6 - 12
VM450 2800 3000 4500 2875 5760 6 - 6 4410 4445 4560
*3000 *6 - 12
VM475 2750 2950 4750 3000 6010 6 - 6 4430 4465 4580
*2900 *2900 *6 - 6
VM500 2700 2850 5000 3125 6260 *6 - 6 4455 4490 4605
*2850 *2850 6 - 6
VM550 *2400 *2400 5500 3425 6760 *3 - 6 4530 4565 4680
VM600 *2000 *2000 6000 3675 7260 *3 - 6 4570 4605 4720
Wide view Mast VM
Wide view Full Free 2-stage Mast VFM
NOTE: (1) For height without backrest: -540mm.
(2) For free lift without backrest: +540mm.
Weight without backrest: -30kg.
(3) Weight for diesel model: +140kg (TD27) +120kg(C240)
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D30
Max.
Fork
Height
Overall Mast Height
Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B
(3) ServiceWeight (kg)
FG30
(2) Free
lift with
Backrest
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD
VM250 3000 3000 2500 1820 3760 600 6 - 10 4210 4245 4360
VM270 3000 3000 2700 1920 3960 700 6 -10 4225 4260 4375
VM300 3000 3000 3000 2075 4260 850 6 - 12 4250 4285 4400
VM330 3000 3000 3300 2225 4560 1000 6 - 12 4275 4310 4425
VM350 3000 3000 3500 2325 4760 1100 6 - 12 4290 4325 4440
VM375 3000 3000 3750 2450 5010 1225 6 - 6 4310 4345 4460
*6 - 12
VM400 3000 3000 4000 2625 5260 1400 6 - 6 4370 4405 4520
*6 - 12
VM425 2900 3000 4250 2750 5510 1525 6 - 6 4390 4425 4540
*3000 *6 - 12
VM450 2800 3000 4500 2875 5760 1650 6 - 6 4410 4445 4560
*3000 *6 - 12
VM475 2750 2950 4750 3000 6010 1775 6 - 6 4430 4465 4580
*2900 *2900 6 - 6
VM500 2700 2850 5000 3125 6260 1900 *6 - 6 4455 4490 4605
*2850 *2850 6 - 6
VM550 *2400 *2400 5500 3425 6760 2200 *3 - 6 4530 4565 4680
VM600 *2000 *2000 6000 3675 7260 2450 *3 - 6 4570 4605 4720
NOTE: (1) For height without backrest: -580mm.
(2) For free lift without backrest: +580mm.
Weight without backrest: -30kg.
(3) Weight for diesel model: +140kg (TD27) +120kg(C240)
Wide view Full Free 3-stage Mast VFHM
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Serves Weight ofVM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”.
Lifting Speed withVFM/VFHM Mast: withVFM FG 420mm/s with load. 440mm/s without load.
FD 460mm/s with load. 530mm/s without load.
withVFHM FG 430mm/s with load. 450mm/s without load.
FD 480mm/s with load. 550mm/s without load.
Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load.
OverallVehicle lenght withVFHM mast: +15mm longer than that of STD model withVM/FM mast
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D30
Max.
Fork
Height Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B FG30
(2) Free
lift with
Backrest
Overall Mast Height (3) ServiceWeight (kg)
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD
VFHM360 3000 3000 3600 1825 4860 600 6 - 6 4395 4430 4545
*6 - 10
VFHM400 3000 3000 4000 1950 5260 725 6 - 6 4425 4460 4575
*6 - 10
VFHM435 2900 2900 4350 2075 5610 850 6 - 6 4460 4495 4610
*3000 *3000 *6 - 10
VFHM480 2800 2800 4800 2225 6060 1000 6 - 6 4495 4530 4645
*2900 *2900 *6 - 10
VFHM500 2600 2750 5000 2325 6260 1100 6 - 6 4520 4555 4670
*2750 *2750 *6-10
VFHM540 1900 2500 5400 2450 6660 1225 3 - 6 4555 4590 4705
*2650 *2650 *3 - 6
VFHM600 1400 1850 6000 2675 7260 1450 3 - 6 4650 4685 4800
*2100 *2100 *3 - 6
VFHM650 *1700 *1700 6500 2890 7760 1665 *3 - 3 4715 4750 4865
VFHM700 *1350 *1350 7000 3110 8260 1885 *3 - 3 4770 4805 4920
NOTE: (1) For height without backrest: -580mm.
(2) For free lift without backrest: +580mm.
Weight without backrest: -30kg.
(3) Weight for diesel model: +140kg (TD27) +120kg(C240)
NOTE: (1) For height without backrest: -580mm.
(2) For free lift without backrest: +580mm.
Weight without backrest: -30kg.
(3) Weight for diesel model: +140kg (TD27) +120kg(C240)
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Lifting Speed withVFM/VFHM Mast: withVFM FG 360mm/s with load. 420mm/s without load.
FD 430mm/s with load. 500mm/s without load.
withVFHM FG 380mm/s with load. 430mm/s without load.
FD 450mm/s with load. 520mm/s without load.
Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load.
OverallVehicle lenght withVFHM mast: +35mm/+45mm longer than that of STD model withVM mast
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D30
Max.
Fork
Height Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B FG30
(2) Free
lift with
Backrest
Overall Mast Height (3) ServiceWeight (kg)
Wide view Full Free 2-Stage Mast VFW (4CYLINDER)
Mast
Model
Rated Capacity 500mm:load center (kg)
FG / D30
Max.
Fork
Height Lowered
(1) Raised
with Backrest
Tilting
Angle
F/B FG30
(2) Free
lift with
Backrest
Overall Mast Height (3) ServiceWeight (kg)
Wide view Full Free 3-Stage Mast VFHW (4CYLINDER)
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD
VFW300 2900 2900 3000 2125 4260 900 6 - 12 4310 4345 4495
VFW330 2900 2900 3300 2275 4560 1050 6 - 12 4335 4370 4520
VFW350 2900 2900 3500 2375 4760 1150 6 - 12 4355 4390 4540
VFW375 2900 2900 3750 2500 5010 1275 6 - 6 4375 4410 4560
*6 - 12
VFW400 2900 2900 4000 2675 5260 1450 6 - 6 4440 4475 4625
*6 - 12
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD
VHW435 2800 2900 4350 2125 5610 900 6 - 6 4470 4505 4655
*2900 *6 - 10
VHW480 2700 2800 4800 2275 6060 1050 6 - 6 4510 4545 4695
*2800 *6 - 10
VHW500 2600 2750 5000 2375 6260 1150 6 - 6 4535 4570 4720
*2750 *6 - 10
VHW540 1900 2500 5400 2500 6660 1275 3 - 6 4565 4600 4750
*2650 *2650
VHW550 1900 2350 5500 2540 6760 1315 3 - 6 4575 4610 4760
*2600 *2600
Wide view Mast VM
NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +45mm
(2) Figures for (2t, 2.5t model); For (3t model) +230mm. / For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm
(3) Figures for (2t, 2.5t model); For (3t model) -180mm. / For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. /
Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30kg
(4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130kg.
Wide view Full Free 2-stage Mast VFM
Mast
Model
Rated Capacity 500mm:load center (kg)
FHG / D20T3
FHG / D20C3
Max.
Fork
Height
Overall Mast Height
(1)
Lowered
(2) Raised
with
Backrest
Tilting
Angle
F/B
(4) ServiceWeight (kg)
FHG / D25T3
FHG / D25C3
FHG / D30T3
FHG / D30C3
(3) Free
lift
with
Backrest
FHG 20T3
FHG 20C3
FHG 25T3
FHG 25C3
FHG 30T3
FHG 30C3
NOTE: (1) Figures for (2t; 2,5t model). For (3t model) +45mm
(2) Weight for diesel model: (2t model) +120kg, (2,5t model) +120kg, (3t model) +130 kg.
Mast
Model
Rated Capacity 500mm:load center (kg) Max.
Fork
Height
Overall Mast Height
(1)
Lowered
Raised
with
Backrest
Tilting
Angle
F/B
(2) ServiceWeight (kg)
FHG / D20T3
FHG / D20C3
FHG / D25T3
FHG / D25C3
FHG / D30T3
FHG / D30C3
FHG 20T3
FHG 20C3
FHG 25T3
FHG 25C3
FHG 30T3
FHG 30C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD S DD SDD
VM250 2000 2000 2500 2500 3000 3000 2500 1780 3530 6 - 10 3180 3285 3300 3540 3645 3660 4220 4255 4370
VM270 2000 2000 2500 2500 3000 3000 2700 1880 3730 6 - 10 3195 3300 3315 3555 3660 3675 4235 4270 4385
VM300 2000 2000 2500 2500 3000 3000 3000 2030 4030 6 - 12 3220 3325 3340 3580 3685 3700 4260 4295 4410
VM330 2000 2000 2500 2500 3000 3000 3300 2180 4330 6 - 12 3245 3350 3365 3605 3710 3725 4285 4320 4435
VM350 2000 2000 2500 2500 3000 3000 3500 2280 4530 6 - 12 3260 3365 3380 3620 3725 3740 4300 4335 4450
VM375 2000 2000 2500 2500 3000 3000 3750 2405 4780 6 - 6 3280 3385 3400 3640 3745 3760 4320 4355 4470
*6 - 12
VM400 2000 2000 2500 2500 3000 3000 4000 2580 5030 6 - 6 3335 3440 3455 3695 3800 3815 4380 4415 4530
*6 - 12
VM425 1950 1950 2450 2450 2900 3000 4250 2705 5280 6 - 6 3355 3460 3475 3715 3820 3835 4400 4435 4550
*2000 *2000 *2500 *2500 *3000 *6 - 12
VM450 1900 1900 2150 2350 2800 3000 4500 2830 5530 6 - 6 3375 3480 3495 3735 3840 3855 4420 4455 4570
*1950 *1950 *2450 *2450 *3000 *6 - 12
VM475 1800 1800 1850 2200 2750 2950 4750 2955 5780 6 - 6 3395 3500 3515 3755 3860 3875 4440 4475 4590
*1850 *1850 *2350 *2350 *2900 *2900 *6 - 6
VM500 1650 1700 1700 2000 2700 2850 5000 3080 6030 6 - 6 3415 3520 3535 3775 3880 3895 4465 4500 4615
*1700 *2250 *2250 *2850 *6 - 6
VM550 *1500 *1500 *1700 *1700 *2400 *2400 5500 3380 6530 *3 - 6 3490 3595 3610 3850 3955 3970 4540 4575 4690
VM600 *1300 *1300 *1400 *1400 *2000 *2000 6000 3630 7030 *3 - 6 3530 3635 3650 3890 3995 4010 4580 4615 4730
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD
VM250 2000 2000 2500 2500 3000 3000 2500 1780 3530 780 6 - 10 3235 3340 3355 3595 3700 3715 4260 4295 4410
VM270 2000 2000 2500 2500 3000 3000 2700 1880 3730 880 6 - 10 3255 3360 3375 3615 3720 3735 4275 4310 4425
VM300 2000 2000 2500 2500 3000 3000 3000 2030 4030 1030 6 - 12 3280 3385 3400 3640 3745 3760 4305 4340 4455
VM330 2000 2000 2500 2500 3000 3000 3300 2180 4330 1180 6 - 12 3305 3410 3425 3665 3770 3785 4330 4365 4480
VM350 2000 2000 2500 2500 3000 3000 3500 2280 4530 1280 6 - 12 3320 3425 3440 3680 3785 3800 4345 4380 4495
VM375 2000 2000 2500 2500 3000 3000 3750 2405 4780 1405 6 - 6 3340 3445 3460 3700 3805 3820 4370 4405 4520
*6 - 12
VM400 2000 2000 2500 2500 3000 3000 4000 2580 5030 1580 6 - 6 3400 3505 3520 3760 3865 3880 4435 4470 4585
*6 - 12
VM425 1950 1950 2450 2450 2900 3000 4250 2705 5280 1705 6 - 6 3420 3525 3540 3780 3885 3900 4455 4490 4605
*2000 *2000 *2500 *2500 *3000 *6 - 12
VM450 1900 1900 2150 2350 2800 3000 4500 2830 5530 1830 6 - 6 3445 3550 3565 3805 3910 3925 4475 4510 4625
*1950 *1950 *2450 *2450 *3000 *6 - 12
VM475 1800 1800 1850 2200 2750 2950 4750 2955 5780 1955 6 - 6 3465 3570 3585 3825 3930 3945 4500 4535 4650
*1850 *1850 *2350 *2350 *2900 *2900 *6 - 6
VM500 1650 1700 1700 2000 2700 2850 5000 3080 6030 2080 6 - 6 3485 3590 3605 3845 3950 3965 4520 4555 4670
*1700 *2250 *2250 *2850 *6 - 6
VM550 *1500 *1500 *1700 *1700 *2400 *2400 5500 3380 6530 2380 *3 - 6 3565 3670 3685 3925 4030 4045 4605 4640 4755
VM600 *1300 *1300 *1400 *1400 *2000 *2000 6000 3630 7030 2630 *3 - 6 3605 3710 3725 3965 4070 4085 4650 4685 4800
NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +45mm
(2) Figures for (2t, 2.5t model); For (3t model) +230mm.
For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm
(3) Figures for (2t, 2.5t model); For (3t model) -180mm.
For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm.
Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg
(4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg.
Wide view Full Free 3-stage Mast VFHM
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Service weight of VM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”.
Lifting Speed withVFM/VFHM Mast: withVFM FG (2t, 2.5t model) 530mm/s with load. 560mm/s without load.
FD (2t, 2.5t model) 550mm/s with load. 580mm/s without load.
FG (3t model) 450mm/s with load. 470mm/s without load.
FD (3t model) 470mm/s with load. 490mm/s without load.
withVFHM FG (2t, 2.5t model) 560mm/s with load. 580mm/s without load.
FD (2t, 2.5t model) 570mm/s with load. 600mm/s without load.
FG (3t model) 460mm/s with load. 480mm/s without load.
FD (3t model) 480mm/s with load. 500mm/s without load.
Lowering speed withVFM/VFHM mast: (2t, 2.5t model) 400mm/s with load. 350mm/s without load.
OverallVehicle lenght withVFM mast: +15mm longer than of STD model withVM mast
Mast
Model
Rated Capacity 500mm:load center (kg)
FHG / D20T3
FHG / D20C3
Max.
Fork
Height
Overall Mast Height
(1)
Lowered
(2) Raised
with
Backrest
Tilting
Angle
F/B
(4) ServiceWeight (kg)
FHG / D25T3
FHG / D25C3
FHG / D30T3
FHG / D30C3
(3) Free
lift
with
Backrest
FHG 20T3
FHG 20C3
FHG 25T3
FHG 25C3
FHG 30T3
FHG 30C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD
VFHM360 2000 2000 2500 2500 3000 3000 3600 1780 4630 780 6 - 6 3375 3480 3495 3735 3840 3855 4405 4440 4555
*6 - 10
VFHM400 2000 2000 2500 2500 3000 3000 4000 1905 5030 905 6 - 6 3405 3510 3525 3765 3870 3885 4435 4470 4585
*6 - 10
VFHM435 1900 1900 2200 2300 2900 2900 4350 2030 5380 1030 6 - 6 3435 3540 3555 3795 3900 3915 4470 4505 4620
*2000 *2000 *2400 *2400 *3000 *3000 *6 - 10
VFHM480 1700 1800 1900 2200 2800 2800 4800 2180 5830 1180 6 - 6 3465 3570 3585 3825 3930 3945 4505 4540 4655
*1900 *1900 *2300 *2300 *2900 *2900 *6 - 10
VFHM500 1500 1750 1600 2000 2600 2750 5000 2280 6030 1280 6 - 6 3490 3595 3610 3850 3955 3970 4530 4565 4680
*1800 *1800 *2550 *2250 *2750 *2750 *6 - 10
VFHM540 1200 1650 1300 1700 1900 2500 5400 2405 6430 1405 3 - 6 3520 3625 3640 3880 3985 4000 4565 4600 4715
*1750 *1750 *2150 *2150 *2650 *2650 *3 - 6
VFHM600 900 1100 950 1100 1400 1850 6000 2630 7030 1630 3 - 6 3615 3720 3735 3975 4080 4095 4660 4695 4810
*1650 *1650 *1800 *1800 *2100 *2100 *3 - 6
VFHM650 *1500 *1500 *1550 *1550 *1700 *1700 6500 2845 7530 1845 *3 - 3 3670 3775 3790 4030 4135 4150 4725 4760 4875
VFHM700 *1250 *1250 *1250 *1250 *1350 *1350 7000 3065 8030 2065 *3 - 3 3725 3830 3845 4085 4190 4205 4780 4815 4930
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Lifting Speed withVFM/VFHM Mast: withVFM FG (2t, 2.5t model) 450mm/s with load. 490mm/s without load.
FD (2t, 2.5t model) 510mm/s with load. 540mm/s without load.
FG (3t model) 410mm/s with load. 470mm/s without load.
FD (3t model) 430mm/s with load. 460mm/s without load.
withVFHM FG (2t, 2.5t model) 460mm/s with load. 510mm/s without load.
FD (2t, 2.5t model) 530mm/s with load. 560mm/s without load.
FG (3t model) 430mm/s with load. 460mm/s without load.
FD (3t model) 450mm/s with load. 480mm/s without load.
Lowering speed withVFM/VFHM mast: (2t, 2.5t, 3t model) 400mm/s with load. 350mm/s without load.
OverallVehicle lenght withVFW/VFHW (4cylinder) mast (2t, 2,5t model): +35mm longer than of STD model withVM mast
(3t model): +35mm/+45mm longer than of STD model withVM mast
NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +80mm
(2) Figures for (2t, 2.5t model); For (3t model) +230mm.
For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm
(3) Figures for (2t, 2.5t model); For (3t model) -145mm.
For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm.
Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg
(4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg.
Wide view Full Free 2-stage Mast VFW (4CYLINDER)
Wide view Full Free 3-stage Mast VFHW (4CYLINDER)
NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +80mm
(2) Figures for (2t, 2.5t model); For (3t model) +230mm.
For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm
(3) Figures for (2t, 2.5t model); For (3t model) -145mm.
For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm.
Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg
(4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg.
Mast
Model
Rated Capacity 500mm:load center (kg)
FHG / D20T3
FHG / D20C3
Max.
Fork
Height
Overall Mast Height
(1)
Lowered
(2) Raised
with
Backrest
Tilting
Angle
F/B
(4) ServiceWeight (kg)
FHG / D25T3
FHG / D25C3
FHG / D30T3
FHG / D30C3
(3) Free
lift
with
Backrest
FHG 20T3
FHG 20C3
FHG 25T3
FHG 25C3
FHG 30T3
FHG 30C3
Mast
Model
Rated Capacity 500mm:load center (kg)
FHG / D20T3
FHG / D20C3
Max.
Fork
Height
Overall Mast Height
(1)
Lowered
(2) Raised
with
Backrest
Tilting
Angle
F/B
(4) ServiceWeight (kg)
FHG / D25T3
FHG / D25C3
FHG / D30T3
FHG / D30C3
(3) Free
lift
with
Backrest
FHG 20T3
FHG 20C3
FHG 25T3
FHG 25C3
FHG 30T3
FHG 30C3
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD
VFW300 1900 1900 2400 2400 2900 2900 3000 2045 4030 1045 6 - 12 3290 3395 3515 3650 3755 3875 4320 4355 4505
VFW330 1900 1900 2400 2400 2900 2900 3300 2195 4330 1195 6 - 12 3320 3425 3545 3680 3785 3905 4345 4380 4530
VFW350 1900 1900 2400 2400 2900 2900 3500 2295 4530 1295 6 - 12 3335 3440 3560 3695 3800 3920 4365 4400 4550
VFW375 1800 1800 2350 2350 2900 2900 3750 2420 4780 1420 *6 - 6 3360 3465 3585 3720 3825 3945 4385 4420 4570
*1900 *1900 6 - 12
VFW400 1800 1800 2300 2300 2900 2900 4000 2595 5030 1595 *6 - 6 3420 3525 3645 3780 3885 4005 4450 4485 4635
*1900 *1900 *2350 *2350 6 - 12
PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD
VHW435 1800 1850 2200 2300 2800 2900 4350 2045 5380 1045 *6 - 6 3435 3540 3660 3795 3900 4020 4480 4515 4665
*1900 *1900 *2400 *2400 *2900 6 - 10
VHW480 1700 1800 1900 2200 2700 2800 4800 2195 5830 1195 *6 - 6 3480 3585 3705 3840 3945 4065 4520 4555 4705
*1900 *1900 *2300 *2300 *2800 6 - 10
VHW500 1500 1750 1600 2000 2600 2750 5000 2295 6030 1295 *6 - 6 3505 3610 3730 3865 3970 4090 4545 4580 4730
*1800 *1800 *2250 *2250 *2750 6 - 10
VHW540 1200 1650 1300 1700 1900 2500 5400 2420 6430 1420 3 - 6 3530 3635 3755 3890 3995 4115 4575 4610 4760
*1750 *1750 *2150 *2150 *2650 *2650
VHW550 1150 1600 1250 1600 1900 2350 5500 2460 6530 1460 3 - 6 3540 3645 3765 3900 4005 4125 4585 4620 4770
*1750 *1750 *2100 *2100 *2600 *2600
Mast
Model
Rated Capacity 500mm:load center (kg)
Max. Fork
Height
Overall Mast Height Tilting Angle
F / B
(3)
Service weight (kg)
FD35T3S Lowered
(1)
Raised with
Backrest
FD35T3S
PNEUMATIC UNIQUE(SE) mm mm mm deg S DD
VM250 3500 3500 2500 1885 3760 6 / 10 4890 4905
VM270 3500 3500 2700 1985 3960 6 / 10 4910 4925
VM300 3500 3500 3000 2135 4260 6 / 12 4940 4955
VM330 3500 3500 3300 2285 4560 6 / 12 4970 4985
VM350 3500 3500 3500 2385 4760 6 / 12 4990 5005
VM375 3500 3500 3750 2510 5010 6 / 6 – *6 / 12 5010 5025
VM400 3500 3500 4000 2685 5260 6 / 6 – *6 / 12 5080 5095
VM425 3500 3500 4250 2810 5510 6 / 6 – *6 / 12 5105 5120
VM450 3400 3450 4500 2935 5760 6 / 6 – *6 / 12 5125 5140
VM475 3400 3400 4750 3060 6010 6 / 6 5150 5165
VM500 3300 3350 5000 3185 6020 6 / 6 5175 5190
VM550 *3200 *3200 5500 3485 6760 *3 / 6 — 5265
VM600 *2400 *2400 6000 3735 7260 *3 / 6 — 5310
SPECIFICATIONS -- 3,5 ton
Wide view Mast VM
NOTE: (1)
For height without backrest: -445mm
(2)
For free lift without backrest: +455mm
Weight for diesel model: -30kg
Wide View Full Free 2-stage Mast VFM
Mast
Model
Rated Capacity 500mm:load center (kg)
Max. Fork
Height
Overall Mast Height (2)
Free lift
with Backrest
Tilting Angle
F / B
(3)
Service weight (kg)
FD35T3S Lowered
(1)
Raised with
Backrest
FD35T3S
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD
VFM250 3500 3500 2500 1885 3760 655 6 / 10 4890 4995
VFM270 3500 3500 2700 1985 3960 755 6 / 10 5000 5015
VFM300 3500 3500 3000 2135 4260 905 6 / 12 5030 5045
VFM330 3500 3500 3300 2285 4560 1055 6 / 12 5065 5080
VFM350 3500 3500 3500 2385 4760 1155 6 / 12 5085 5100
VFM375 3500 3500 3750 2510 5010 1280 6 / 6 – *6 / 12 5115 5130
VFM400 3500 3500 4000 2685 5260 1455 6 / 6 – *6 / 12 5185 5200
VFM425 3500 3500 4250 2810 5510 1580 6 / 6 – *6 / 12 5215 5230
VFM450 3400 3450 4500 2935 5760 1705 6 / 6 – *6 / 12 5240 5255
VFM475 3400 3400 4750 3060 6010 1830 6 / 6 5265 5280
VFM500 3300 3350 5000 3185 6020 1955 6 / 6 5295 5310
VFM550 *3200 *3200 5500 3485 6760 2255 *3 / 6 — 5390
VFM600 *2400 *2400 6000 3735 7260 2505 *3 / 6 — 5445
Wide View Full Free 3-stage Mast VFHM
Mast
Model
Rated Capacity 500mm:load center (kg)
Max. Fork
Height
Overall Mast Height (2)
Free lift
with Backrest
Tilting Angle
F / B
(3)
Service weight (kg)
FD35T3S Lowered
(1)
Raised with
Backrest
FD35T3S
PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD
VFHM 360 3400 3400 3600 1885 4860 655 6 / 6 – *6 / 10 5095 5110
VFHM 400 3400 3400 4000 2010 5260 780 6 / 6 – *6 / 10 5130 5145
VFHM 435 3300 3300 4350 2135 5610 905 6 / 6 – *6 / 10 5160 5175
VFHM 480 3200 3250 4800 2285 6060 1055 6 / 6 – *6 / 10 5200 5215
VFHM 500 3100 3200 5000 2385 6260 1155 6 / 6 – *6 / 10 5230 5245
VFHM 540 2500 - *2900 2700 - *2900 5400 2510 6660 1280 3 / 6 – *3 / 6 5260 5275
VFHM 600 1600 - *2400 2000 - *2400 6000 2735 7260 1505 3 / 6 – *3 / 6 5370 5385
VFHM 650 *2000 *2000 6500 2950 7760 1720 3 / 6 — 5435
VFHM 700 *1600 *1600 7000 3170 8260 1940 3 / 6 — 5495
NOTE: (1)
For height without backrest: -530mm
(2)
For free lift without backrest: +530mm
Weight for diesel model: -30kg
NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires.
Lifting Speed withVFM/VFHM Mast: withVFM 530mm/s with load. 560mm/s without load.
withVFHM 560mm/s with load. 580mm/s without load.
Lowering speed withVFM/VFHM mast: 440mm/s with load. 380mm/s without load.
OverallVehicle lenght withVFHM mast: +15mm longer than of STD model withVM/VFM mast
STANDARD DIMENSIONS (Front Single Tire)
Model
FD/FG15 • FHD/FHG15 FD/FG18 • FHD/FHG18
mm mm
Overall height, Fork raised (with backrest) 4030 4030
Max. fork height 3000 3000
Mast height, Fork lowered 1995 1995
Backrest height 1000 1000
Free lift 155 155
Fork thickness 35 35
Min. ground clearance 125 125
Overall length (with fork) 3165 3195
Length to fork face 2245 2275
Fork length 920 920
Load distance 395 395
Wheelbase 1425 1425
Rear overhang 425 455
Drawbar Pin Center Height 495 495
Overhead guard clearance (from face of seat)** FD / FG15 • 18 = 1035 FHD / FHG15 • 18 = 1005
Overall height (overhead guard)** 2070 2070
Overall width 1070 1100
Fork spread (outside) 200 - 920 200 - 920
Tread (front) 890 920
Tread (rear) 920 920
Fork width 100 100
Inside turning radius 110 95
Outside turning radius 1980 2010
Min. intersecting aisle 1780 1800
Tilt angles (forward-backward) 6° - 12° 6° - 12°
Model FD/FG15 • FHD/FHG15 FD/FG18 • FHD/FHG18
Tire size (front dual Type: DD) 4 x 4,50 - 12 - 8PR JL
mm mm
Overall width 1255 1255
Tread (front) 980 980
Inside turning radius 90 90
Outside turning radius 2020 2050
Min. intersecting aisle 1840 1860
Tire size (front dual Type: SDD) 4 x 6,50 - 10 - 10PR JL
mm mm
Overall width 1512 1512
Tread (front) 1110 1110
Inside turning radius 90 90
Outside turning radius 2095 2120
Min. intersecting aisle 1940 1960
DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option)
**
European (EXE) and Scandinavian export trucks (EXN): +60mm
GROUND CLEARANCE
FD/FG15
FD/FG18
FHD/FHG15
FHD/FHG18
mm mm
Mast 110 110
Frame 105 105
Front axle 125 125
Rear axle 125 125
Counter weight 135 135
STANDARD DIMENSIONS (Front Single Tire)
Model
FD/FG20 • FHD/FHG20 FD/FG25 • FHD/FHG25 FD/FG30 • FHD/FHG30 FD35T3S
mm mm mm mm
Overall height, Fork raised (with backrest) 4030 4030 4260 4255
Max. fork height 3000 3000 3000 3000
Mast height, Fork lowered 2030 2030 2075 2135
Backrest height 1000 1000 1220 1220
Free lift 105 110 165 170
Fork thickness 36 40 45 50
Min. ground clearance 125 125 145 145
Overall length (with fork) 3555 3625 3775 3870
Length to fork face 2485 2555 2705 2800
Fork length 1070 1070 1070 1070
Load distance 450 450 480 495
Wheelbase 1600 1600 1700 1700
Rear overhang 435 505 525 605
Drawbar Pin Center Height 530 530 560 610
Overhead guard clearance (from face of seat)** 1005 1005 1005 1005
Overall height (overhead guard)** 2070 2070 2090 2140
Overall width 1150 1150 1225 1290
Fork spread (outside) 245 - 1020 245 - 1020 250 - 1090 300 - 1090
Tread (front) 970 970 1000 1060
Tread (rear) 970 970 970 970
Fork width 122 122 125 150
Inside turning radius 160 160 200 200
Outside turning radius 2170 2240 2400 2470
Min. intersecting aisle 2210 2230 2330 2390
Tilt angles (forward-backward) 6° - 12° 6° - 12° 6° - 12° 6° - 12°
Model FD/FG20 • FHD/FHG20 FD/FG25 • FHD/FHG25 FD/FG30 • FHD/FHG30 FD35T3S
Tire size (front dual Type: DD) 4 x 5,50 - 15 - 8PR (l) 4 x 6,00 - 15 - 10PR (l)
mm mm mm mm
Overall width 1480 1480 1520 1600
Tread (front) 1130 1130 1170 1600
Inside turning radius 100 100 100 100
Outside turning radius 2240 2310 2430 2540
Min. intersecting aisle 2320 2340 2445 2500
Tire size (front dual Type: SDD) 4 x 7,00 - 12 - 12PR (l) 4 x 28 x 9 - 15 - 12PR (l) —
mm mm mm mm
Overall width 1590 1590 1950 —
Tread (front) 1190 1190 1435 —
Inside turning radius 100 100 100 —
Outside turning radius 2280 2350 2500 —
Min. intersecting aisle 2350 2370 2490 —
DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option)
**
European (EXE) and Scandinavian export trucks (EXN): +60mm
GROUND CLEARANCE
FD/FG20-25
FHD/FHG20 - 25
FD/FG30
FHD/FHG30
FD35T3S
mm mm mm
Mast 110 140 145
Frame 120 145 190
Front axle 125 145 165
Rear axle 150 175 85
Counter weight 155 185 225
STANDARD SPECIFICATIONS Gasoline -- 1,5 - 1,8 ton
*Computed values
I Manufacturer TCM
2 Model FG15C13 FG15T13 FG18C13 FG18T13
3 Load Capacity kg 1500 1750
4 Load Center mm 500
5 Power Type Gasoline
6 Operation Position Seated
7 Tire Type Front / Rear Pneumatic
8 Wheels (X=driven) Front / Rear 2X / 2
9 Maximum Fork Height mm 3000
10 Free Lift mm 155
13 Fork Size L x W x T mm 920 x 100 x 35
Fork Spread (Outside) Max. / Min. mm 920 / 200
14 Tilt Angle Fwd / Bwd deg 6 - 12
15 Length to Fork Face mm 2245 2275
16 Overall Width mm 1070 1100
17 Mast Height Fork Lowered mm 1995
18 Mast Height Fork Raised mm 4030
19 Overhead Guard Height (EXB, EXK) mm 2070
Overhead Guard Height (EXC, EXE, EXN) mm 2130
20 Operator’s Seat Height mm 1015
21 Turning Radius (Outside) mm 1980 2010
22 Load Distance mm 395
(Centerline of front axle to front face of forks)
Rear Overhang mm 425 455
23 Basic Right Angle Stacking Aisle Width mm 3685 3715
(Add load length and clearance)
24 Speeds Travel Max. Full load km/h 14.0 / 14.0
(Fwd/Rvs.) No load km/h 14.5 / 14.5
25 Lifting Full load mm/s 590
No load mm/s 670
26 Lowering Full load mm/s 450
No load mm/s 550
28 Max. Drawbar Pull Full load kN 9.3 14.5 9.3 14.5
No load kN 6.9
30 Max. Gradeability* Full load % 24 29 20 24
No load % 18
32 Total Weight kg 2510 2670
33 Weight Distribution Full load Front kg 3510 3880
Rear kg 500 540
34 No load Front kg 1070 1030
Rear kg 1440 1640
35 Tires Number Front / Rear 2 / 2
36 Size Front 6.50 - 10 10PR
37 Rear 5.00 - 8 - 8PR
38 Wheelbase mm 1425
39 Tread Front mm 890 920
Rear mm 920
Backrest Height mm 1045
Overhead Guard Clearance mm 1035
Counterweight Height mm 1110
Drawbar Pin Center Height mm 495
Step Height / Floor Height mm 420 / 650
40 Underclearance Min. with load mm 100
41 Center of Wheelbase mm 110
42 Brake Service (Foot) Hydraulic - Foot pedal
43 Parking Mechanical - Hand lever
45 Battery Voltage / Capacity (5HR) V/AH 12 / 28
49 Internal Combustion Engine Make/Model NISSAN K15
Rated Horsepower / r.p.m. kW 25.0 / 2250
Rated Torque / r.p.m. N•m 110.2 / 1600
51 Number of Cylinder 4
52 Piston Displacement cc 1486
Alternator output kW/Amp 0.60 / 50
Fuel Tank Capacity Type lit 50
55 Transmission Type Manual Power-shift Manual Power-shift
Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1
57 Operating Pressure For Attachments MPa (psi) 17.7
Characteristics
Dimensions
Performance
Weight
Chassis
Engine
and
Transmission
*Computed values
I Manufacturer TCM
2 Model FHG15C3 FHG15T3 FHG18C3 FHG18T3
3 Load Capacity kg 1500 1750
4 Load Center mm 500
5 Power Type Gasoline
6 Operation Position Seated
7 Tire Type Front / Rear Pneumatic
8 Wheels (X=driven) Front / Rear 2X / 2
9 Maximum Fork Height mm 3000
10 Free Lift mm 155
13 Fork Size L x W x T mm 920 x 100 x 35
Fork Spread (Outside) Max. / Min. mm 920 / 200
14 Tilt Angle Fwd / Bwd deg 6 - 12
15 Length to Fork Face mm 2245 2275
16 Overall Width mm 1070 1100
17 Mast Height Fork Lowered mm 1995
18 Mast Height Fork Raised mm 4030
19 Overhead Guard Height (EXB, EXK) mm 2070
Overhead Guard Height (EXC, EXE, EXN) mm 2130
20 Operator’s Seat Height mm 1045
21 Turning Radius (Outside) mm 1980 2010
22 Load Distance mm 395
(Centerline of front axle to front face of forks)
Rear Overhang mm 425 455
23 Basic Right Angle Stacking Aisle Width mm 3685 3715
(Add load length and clearance)
24 Speeds Travel Max. Full load km/h 18.5 / 18.5 19.0 / 19.0 18.5 / 18.5 19.0 / 19.0
(Fwd/Rvs.) No load km/h 19.0 / 19.0 19.5 / 19.5 19.0 / 19.0 19.5 / 19.5
25 Lifting Full load mm/s 600
No load mm/s 680
26 Lowering Full load mm/s 450
No load mm/s 550
28 Max. Drawbar Pull Full load kN 12.7 15.7 12.7 15.7
No load kN 6.9
30 Max. Gradeability* Full load % 25 33 22 31
No load % 18
32 Total Weight kg 2510 2670
33 Weight Distribution Full load Front kg 3510 3880
Rear kg 500 540
34 No load Front kg 1070 1030
Rear kg 1440 1640
35 Tires Number Front / Rear 2 / 2
36 Size Front 6.50 - 10 10PR
37 Rear 5.00 - 8 - 8PR
38 Wheelbase mm 1425
39 Tread Front mm 890 920
Rear mm 920
Backrest Height mm 1045
Overhead Guard Clearance mm 1005
Counterweight Height mm 1110
Drawbar Pin Center Height mm 495
Step Height / Floor Height mm 420 / 650
40 Underclearance Min. with load mm 100
41 Center of Wheelbase mm 110
42 Brake Service (Foot) Hydraulic - Foot pedal
43 Parking Mechanical - Hand lever
45 Battery Voltage / Capacity (5HR) V/AH 12 / 28
49 Internal Combustion Engine Make/Model NISSAN K21
Rated Horsepower / r.p.m. kW 34.6 / 2250
Rated Torque / r.p.m. N•m 153.5 / 1600
51 Number of Cylinder 4
52 Piston Displacement cc 2065
Alternator output kW/Amp 0.60 / 50
Fuel Tank Capacity Type lit 50
55 Transmission Type Manual Power-shift Manual Power-shift
Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1
57 Operating Pressure For Attachments MPa (psi) 17.7
Characteristics
Dimensions
Performance
Weight
Chassis
Engine
and
Transmission
STANDARD SPECIFICATIONS Gasoline – 2 - 2.5 - 3 ton
*Computed values
Characteristics
1 Manufacturer TCM
2 Model FG20C3 FG20T3 FG25C3 FG25T3 FG30C3 FG30T3
3
Load Capacity kg 2000 2500 3000
Load Center mm 500 500 500
5 Power type Gasoline Gasoline Gasoline
6 Operator Position Seated Seated Seated
7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic
8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2
Dimensions
9 Maximum Fork Height mm 3000 3000 3000
10 Free Lift mm 105 110 165
13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45
Fork Spread (Outside) Max. / Min. mm 1020 / 244 1020 / 244 1090 / 250
14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12
15 Lenght to Fork Face mm 2485 2555 2705
16 Overall Width mm 1150 1150 1225
17 Mast Height Fork Lowered mm 2030 2030 2075
18 Mast Height Fork Raised mm 4030 4030 4260
19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090
Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150
20 Operator’s Seat Height mm 1045 1045 1070
21 Turning Radius (Outside) mm 2170 2240 2400
22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480
Rear Overhang mm 435 505 525
23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185
Performance
24
Speeds
Travel Max. (Fwd. / Rvs.)
Full Load km/h 18,5 18,5 19
No Load km/h 19 19 19,5
25 Lifting
Full Load mm/s 540 540 440
No Load mm/s 580 580 490
26 Lowering
Full Load mm/s 450 450 450
No Load mm/s 550 550 450
28 Max. Drawbar Pull
Full Load kN 12,3 16,7 12,3 16,7 10,8 14,2
No Load kN 8,3 8,3 9,8
29 Max. Gradeability*
Full Load % 20 28 19 24 14 18
No Load % 20 20 20
Weight
32 Total Weight kg 3210 3570 4205
33
Weight Distribution
Full Load
Front kg 4610 5350 6350
Rear kg 600 720 900
34 No Load
Front kg 1430 1370 1620
Rear kg 1780 2200 2630
Chassis
&
Wheels
35
Tires
Number Front / Rear 2 / 2 2 / 2 2 / 2
36
Size
Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l)
37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l)
38 Wheelbase mm 1600 1600 1700
39 Tread
Front mm 970 970 1000
Rear mm 970 970 970
Backrest Height mm 1040 1040 1300
Overhead Guard Clearance mm 1005 1005 1005
Counterweight Height mm 1110 1110 1130
Drawbar Pin Center Height mm 530 530 560
Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680
40
Underclearance
Minimum Full Load mm 110 110 140
41 Center of wheelbase mm 120 120 145
42
Brake
Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal
43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever
Engine
&
Transmission
45 Battery Voltage / Capacity (5HR) V / AH 12 / 30 12 / 30 12 / 30
49
Internal Combustion Engine
Make - Model NISSAN / K21 NISSAN / K21 NISSAN / K21
50 Rated Horsepower / r.p.m. kW 34,6 / 2250 34,6 / 2250 34,6 / 2250
51 Rated Torque / r.p.m. N-m 153,5 / 1600 153,5 / 1600 153,5 / 1600
52
Number of Cylinder 4 4 4
Piston Displacement cc 2065 2065 2065
Alternator output kW/amp 0,60 / 50 0,60 / 50 0,60 / 50
Fuel Tank Capacity Type liter 70 70 70
55 Transmission
Type Manual Power-shift Manual Power-shift Manual Power-shift
Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1
57 Operating Pressure For attachment MPa 17,7 17,7 17,7
*Computed values
Characteristics
1 Manufacturer TCM
2 Model FHG20C3 FHG20T3 FHG25C3 FHG25T3 FHG30C3 FHG30T3
3
Load Capacity kg 2000 2500 3000
Load Center mm 500 500 500
5 Power type Gasoline Gasoline Gasoline
6 Operator Position Seated Seated Seated
7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic
8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2
Dimensions
9 Maximum Fork Height mm 3000 3000 3000
10 Free Lift mm 105 110 165
13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45
Fork Spread (Outside) Max. / Min. mm 1020 / 244 1020 / 244 1090 / 250
14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12
15 Lenght to Fork Face mm 2485 2555 2705
16 Overall Width mm 1150 1150 1225
17 Mast Height Fork Lowered mm 2030 2030 2075
18 Mast Height Fork Raised mm 4030 4030 4260
19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090
Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150
20 Operator’s Seat Height mm 1045 1045 1070
21 Turning Radius (Outside) mm 2170 2240 2400
22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480
Rear Overhang mm 435 505 525
23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185
Performance
24
Speeds
Travel Max. (Fwd. / Rvs.)
Full Load km/h 18,5 18,5 19
No Load km/h 19 19 19,5
25 Lifting
Full Load mm/s 600 600 500
No Load mm/s 620 620 520
26 Lowering
Full Load mm/s 450 450 450
No Load mm/s 550 550 450
28 Max. Drawbar Pull
Full Load kN 14,2 22,1 14,2 22,1 12,7 19,6
No Load kN 8,3 8,3 9,8
29 Max. Gradeability*
Full Load % 24 36 21 33 18 24
No Load % 20 18 20
Weight
32 Total Weight kg 3220 3580 4260
33
Weight Distribution
Full Load
Front kg 4620 5350 6350
Rear kg 600 730 910
34 No Load
Front kg 1440 1370 1620
Rear kg 1780 2210 2640
Chassis
&
Wheels
35
Tires
Number Front / Rear 2 / 2 2 / 2 2 / 2
36
Size
Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l)
37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l)
38 Wheelbase mm 1600 1600 1700
39 Tread
Front mm 970 970 1000
Rear mm 970 970 970
Backrest Height mm 1040 1040 1300
Overhead Guard Clearance mm 1005 1005 1005
Counterweight Height mm 1110 1110 1130
Drawbar Pin Center Height mm 530 530 560
Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680
40
Underclearance
Minimum Full Load mm 110 110 140
41 Center of wheelbase mm 120 120 145
42
Brake
Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal
43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever
Engine
&
Transmission
45 Battery Voltage / Capacity (5HR) V / AH 12 / 30 12 / 30 12 / 30
49
Internal Combustion Engine
Make - Model NISSAN / K25 NISSAN / K25 NISSAN / K25
50 Rated Horsepower / r.p.m. kW 39,5 / 2100 39,5 / 2100 39,5 / 2100
51 Rated Torque / r.p.m. N-m 188,1 / 1600 188,1 / 1600 188,1 / 1600
52
Number of Cylinder 4 4 4
Piston Displacement cc 2488 2488 2488
Alternator output kW/amp 0,60 / 50 0,60 / 50 0,60 / 50
Fuel Tank Capacity Type liter 70 70 70
55 Transmission
Type Manual Power-shift Manual Power-shift Manual Power-shift
Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1
57 Operating Pressure For attachment MPa 17,7 17,7 17,7
STANDARD SPECIFICATIONS Diesel -- 1.5 - 1.8 ton
*Computed values
I Manufacturer TCM
2 Model FD15C13 FD15T13 FD18C13 FD18T13
3 Load Capacity kg 1500 1750
4 Load Center mm 500
5 Power Type Diesel
6 Operation Position Seated
7 Tire Type Front / Rear Pneumatic
8 Wheels (X=driven) Front / Rear 2X / 2
9 Maximum Fork Height mm 3000
10 Free Lift mm 155
13 Fork Size L x W x T mm 920 x 100 x 35
Fork Spread (Outside) Max. / Min. mm 920 / 200
14 Tilt Angle Fwd / Bwd deg 6 - 12
15 Length to Fork Face mm 2245 2275
16 Overall Width mm 1070 1100
17 Mast Height Fork Lowered mm 1995
18 Mast Height Fork Raised mm 4030
19 Overhead Guard Height (EXB, EXK) mm 2070
Overhead Guard Height (EXC, EXE, EXN) mm 2130
20 Operator’s Seat Height mm 1015
21 Turning Radius (Outside) mm 1980 2010
22 Load Distance mm 395
(Centerline of front axle to front face of forks)
Rear Overhang mm 425 455
23 Basic Right Angle Stacking Aisle Width mm 3685 3715
(Add load length and clearance)
24 Speeds Travel Max. Full load km/h 13.5 / 13.5
(Fwd/Rvs.) No load km/h 14.0 / 14.0
25 Lifting Full load mm/s 530
No load mm/s 600
26 Lowering Full load mm/s 450
No load mm/s 550
28 Max. Drawbar Pull Full load kN 8.8 13.7 8.8 13.7
No load kN 6.9
30 Max. Gradeability* Full load % 22 24 20 21
No load % 19 16
32 Total Weight kg 2540 2700
33 Weight Distribution Full load Front kg 3530 3900
Rear kg 510 550
34 No load Front kg 1090 1050
Rear kg 1450 1650
35 Tires Number Front / Rear 2 / 2
36 Size Front 6.50 - 10 10PR
37 Rear 5.00 - 8 - 8PR
38 Wheelbase mm 1425
39 Tread Front mm 890 920
Rear mm 920
Backrest Height mm 1045
Overhead Guard Clearance mm 1035
Counterweight Height mm 1110
Drawbar Pin Center Height mm 495
Step Height / Floor Height mm 420 / 650
40 Underclearance Min. with load mm 100
41 Center of Wheelbase mm 110
42 Brake Service (Foot) Hydraulic - Foot pedal
43 Parking Mechanical - Hand lever
45 Battery Voltage / Capacity (5HR) V/AH 12 / 52
49 Internal Combustion Engine Make/Model KUBOTA D1503
Rated Horsepower / r.p.m. kW 21.3 / 2500
Rated Torque / r.p.m. N•m 98 / 1600
51 Number of Cylinder 3
52 Piston Displacement cc 1499
Alternator output kW/Amp 0.54 / 45
Fuel Tank Capacity Type lit 50
55 Transmission Type Manual Power-shift Manual Power-shift
Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1
57 Operating Pressure For Attachments MPa (psi) 17.7
Characteristics
Dimensions
Performance
Weight
Chassis
Engine
and
Transmission
*Computed values
I Manufacturer TCM
2 Model FHG15C3 FHG15T3 FHG18C3 FHG18T3
3 Load Capacity kg 1500 1750
4 Load Center mm 500
5 Power Type Diesel
6 Operation Position Seated
7 Tire Type Front / Rear Pneumatic
8 Wheels (X=driven) Front / Rear 2X / 2
9 Maximum Fork Height mm 3000
10 Free Lift mm 155
13 Fork Size L x W x T mm 920 x 100 x 35
Fork Spread (Outside) Max. / Min. mm 920 / 200
14 Tilt Angle Fwd / Bwd deg 6 - 12
15 Length to Fork Face mm 2245 2275
16 Overall Width mm 1070 1100
17 Mast Height Fork Lowered mm 1995
18 Mast Height Fork Raised mm 4030
19 Overhead Guard Height (EXB, EXK) mm 2070
Overhead Guard Height (EXC, EXE, EXN) mm 2130
20 Operator’s Seat Height mm 1045
21 Turning Radius (Outside) mm 1980 2010
22 Load Distance mm 395
(Centerline of front axle to front face of forks)
Rear Overhang mm 425 455
23 Basic Right Angle Stacking Aisle Width mm 3685 3715
(Add load length and clearance)
24 Speeds Travel Max. Full load km/h 18.5 / 18.5 19.0 / 19.0 18.5 / 18.5 19.0 / 19.0
(Fwd/Rvs.) No load km/h 19.0 / 19.0 19.5 / 19.5 19.0 / 19.0 19.5 / 19.5
25 Lifting Full load mm/s 620
No load mm/s 680
26 Lowering Full load mm/s 450
No load mm/s 550
28 Max. Drawbar Pull Full load kN 14.7 18.6 14.7 18.6
No load kN 6.9
30 Max. Gradeability* Full load % 25 33 22 31
No load % 18 17
32 Total Weight kg 2620 2780
33 Weight Distribution Full load Front kg 3550 3910
Rear kg 570 620
34 No load Front kg 1110 1060
Rear kg 1510 1720
35 Tires Number Front / Rear 2 / 2
36 Size Front 6.50 - 10 10PR
37 Rear 5.00 - 8 - 8PR
38 Wheelbase mm 1425
39 Tread Front mm 890 920
Rear mm 920
Backrest Height mm 1045
Overhead Guard Clearance mm 1005
Counterweight Height mm 1110
Drawbar Pin Center Height mm 495
Step Height / Floor Height mm 420 / 650
40 Underclearance Min. with load mm 100
41 Center of Wheelbase mm 110
42 Brake Service (Foot) Hydraulic - Foot pedal
43 Parking Mechanical - Hand lever
45 Battery Voltage / Capacity (5HR) V/AH 12 / 64
49 Internal Combustion Engine Make/Model NISSAN DIESEL TD27 - II
Rated Horsepower / r.p.m. kW 42.0 / 2400
Rated Torque / r.p.m. N•m 170 / 2300
51 Number of Cylinder 4
52 Piston Displacement cc 2663
Alternator output kW/Amp 0.72 / 60
Fuel Tank Capacity Type lit 50
55 Transmission Type Manual Power-shift Manual Power-shift
Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1
57 Operating Pressure For Attachments MPa (psi) 17.7
Characteristics
Dimensions
Performance
Weight
Chassis
Engine
and
Transmission
STANDARD SPECIFICATIONS Diesel -- 2 - 2,5 - 3 - 3,5 ton
Characteristics
1 Manufacturer TCM
2 Model FD20C3 FD20T3 FD25C3 FD25T3
3
Load Capacity kg 2000 2500
Load Center mm 500 500
5 Power type Diesel Diesel
6 Operator Position Seated Seated
7 Tire Type Front / Rear Pneumatic Pneumatic
8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2
Dimensions
9 Maximum Fork Height mm 3000 3000
10 Free Lift mm 105 110
13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40
Fork Spread (Outside) Max. / Min. mm 1020 / 245 1020 / 245
14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12
15 Lenght to Fork Face mm 2485 2555
16 Overall Width mm 1150 1150
17 Mast Height Fork Lowered mm 2030 2030
18 Mast Height Fork Raised mm 4030 4030
19 Overhead Guard Height (EXB, EXK) mm 2070 2070
Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130
20 Operator’s Seat Height mm 1045 1045
21 Turning Radius (Outside) mm 2170 2240
22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450
Rear Overhang mm 435 505
23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995
Performance
24
Speeds
Travel Max. (Fwd. / Rvs.)
Full Load km/h 18,5 18 18,5 18
No Load km/h 19 18,5 19 18,5
25 Lifting
Full Load mm/s 630 630
No Load mm/s 670 670
26 Lowering
Full Load mm/s 450 450
No Load mm/s 550 550
28 Max. Drawbar Pull
Full Load kN 13,7 19,1 13,7 19,1
No Load kN 8,3 8,3
29 Max. Gradeability*
Full Load % 23 34 20 28
No Load % 20 20
Weight
32 Total Weight kg 3340 3700
33
Weight Distribution
Full Load
Front kg 4670 5400
Rear kg 670 800
34 No Load
Front kg 1490 1420
Rear kg 1850 2280
Chassis
&
Wheels
35
Tires
Number Front / Rear 2 / 2 2 / 2
36
Size
Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l)
37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l)
38 Wheelbase mm 1600 1600
39 Tread
Front mm 970 970
Rear mm 970 970
Backrest Height mm 1040 1040
Overhead Guard Clearance mm 1005 1005
Counterweight Height mm 1110 1110
Drawbar Pin Center Height mm 530 530
Step Height / Floor Height mm 435 / 650 435 / 650
40
Underclearance
Minimum Full Load mm 110 110
41 Center of wheelbase mm 120 120
42
Brake
Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal
43 Parking Mechanical-Hand lever Mechanical-Hand lever
Engine
&
Transmission
45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64
49
Internal Combustion Engine
Make - Model NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II
50 Rated Horsepower / r.p.m. kW 42,0 / 2400 42,0 / 2400
51 Rated Torque / r.p.m. N-m 170 / 2300 170 / 2300
52
Number of Cylinder 4 4
Piston Displacement cc 2663 2663
Alternator output kW/amp 0,72 / 60 0,72 / 60
Fuel Tank Capacity Type liter 70 70
55 Transmission
Type Manual Power-shift Manual Power-shift
Stage Fwd - Rvs 2-2 1-1 2-2 1-1
57 Operating Pressure For attachment MPa 17,7 17,7
Characteristics
1 Manufacturer TCM
2 Model FD30C3 FD30T3 FD35T3S
3
Load Capacity kg 3000 3500
Load Center mm 500 500
5 Power type Diesel Diesel
6 Operator Position Seated Seated
7 Tire Type Front / Rear Pneumatic Pneumatic
8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2
Dimensions
9 Maximum Fork Height mm 3000 3000
10 Free Lift mm 165 170
13 Fork Size L x W x T mm 1070 x 122 x 45 1070 x 150 x 50
Fork Spread (Outside) Max. / Min. mm 1090 / 250 1090 / 300
14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12
15 Lenght to Fork Face mm 2705 2800
16 Overall Width mm 1225 1290
17 Mast Height Fork Lowered mm 2075 2135
18 Mast Height Fork Raised mm 4260 4255
19 Overhead Guard Height (EXB, EXK) mm 2090 2140
Overhead Guard Height (EXC, EXE, EXN) mm 2150 2200
20 Operator’s Seat Height mm 1070 1120
21 Turning Radius (Outside) mm 2400 2470
22 Load Distance (Centerline of Axle to Front Face of Forks) mm 480 495
Rear Overhang mm 525 605
23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 4185 4145
Performance
24
Speeds
Travel Max. (Fwd. / Rvs.)
Full Load km/h 19 19
No Load km/h 19,5 19,5
25 Lifting
Full Load mm/s 520 460
No Load mm/s 590 490
26 Lowering
Full Load mm/s 450 420
No Load mm/s 450 450
28 Max. Drawbar Pull
Full Load kN 12,7 17,2 18,1
No Load kN 9,8 10,8
29 Max. Gradeability*
Full Load % 15 21 20
No Load % 20 17
Weight
32 Total Weight kg 4390 4940
33
Weight Distribution
Full Load
Front kg 6410 7290
Rear kg 980 800
34 No Load
Front kg 1680 1420
Rear kg 2710 2280
Chassis
&
Wheels
35
Tires
Number Front / Rear 2 / 2 2 / 2
36
Size
Front 28 x 9 - 15 - 12PR (l) 7,00 - 12 - 12PR (l)
37 Rear 6,50 - 10 - 10PR (l) 6,00 - 9 - 10PR (l)
38 Wheelbase mm 1700 1600
39 Tread
Front mm 1000 970
Rear mm 970 970
Backrest Height mm 1300 1040
Overhead Guard Clearance mm 1005 1005
Counterweight Height mm 1130 1110
Drawbar Pin Center Height mm 560 530
Step Height / Floor Height mm 460 / 680 435 / 650
40
Underclearance
Minimum Full Load mm 140 110
41 Center of wheelbase mm 145 120
42
Brake
Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal
43 Parking Mechanical-Hand lever Mechanical-Hand lever
Engine
&
Transmission
45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64
49
Internal Combustion Engine
Make - Model NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II
50 Rated Horsepower / r.p.m. kW 42,0 / 2400 42,0 / 2400
51 Rated Torque / r.p.m. N-m 170 / 2300 170 / 2300
52
Number of Cylinder 4 4
Piston Displacement cc 2663 2663
Alternator output kW/amp 0,72 / 60 0,72 / 60
Fuel Tank Capacity Type liter 70 70
55 Transmission
Type Manual Power-shift Manual
Stage Fwd - Rvs 2-2 1-1 2-2
57 Operating Pressure For attachment MPa 17,7 17,7
Characteristics
1 Manufacturer TCM
2 Model FHD20C3 FHD20T3 FHD25C3 FHD25T3 FHD30C3 FHD30T3
3
Load Capacity kg 2000 2500 3000
Load Center mm 500 500 500
5 Power type Diesel Diesel Diesel
6 Operator Position Seated Seated Seated
7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic
8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2
Dimensions
9 Maximum Fork Height mm 3000 3000 3000
10 Free Lift mm 105 110 165
13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45
Fork Spread (Outside) Max. / Min. mm 1020 / 245 1020 / 245 1090 / 250
14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12
15 Lenght to Fork Face mm 2485 2555 2705
16 Overall Width mm 1150 1150 1225
17 Mast Height Fork Lowered mm 2030 2030 2075
18 Mast Height Fork Raised mm 4030 4030 4260
19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090
Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150
20 Operator’s Seat Height mm 1045 1045 1070
21 Turning Radius (Outside) mm 2170 2240 2400
22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480
Rear Overhang mm 435 505 525
23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185
Performance
24
Speeds
Travel Max. (Fwd. / Rvs.)
Full Load km/h 18 18 19
No Load km/h 18,5 18,5 19,5
25 Lifting
Full Load mm/s 620 620 520
No Load mm/s 640 640 540
26 Lowering
Full Load mm/s 450 450 450
No Load mm/s 550 550 450
28 Max. Drawbar Pull
Full Load kN 15,7 26,5 15,7 26,5 14,8 13,5
No Load kN 8,3 8,3 9,8
29 Max. Gradeability*
Full Load % 28 38 24 32 16 27
No Load % 20 18 20
Weight
32 Total Weight kg 3340 3700 4390
33
Weight Distribution
Full Load
Front kg 4680 5400 6410
Rear kg 660 800 980
34 No Load
Front kg 1500 1420 1690
Rear kg 1840 2280 2700
Chassis
&
Wheels
35
Tires
Number Front / Rear 2 / 2 2 / 2 2 / 2
36
Size
Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l)
37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l)
38 Wheelbase mm 1600 1600 1700
39 Tread
Front mm 970 970 1000
Rear mm 970 970 970
Backrest Height mm 1040 1040 1300
Overhead Guard Clearance mm 1005 1005 1005
Counterweight Height mm 1110 1110 1130
Drawbar Pin Center Height mm 530 530 560
Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680
40
Underclearance
Minimum Full Load mm 110 110 140
41 Center of wheelbase mm 120 120 145
42
Brake
Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal
43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever
Engine
&
Transmission
45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64 12 / 64
49
Internal Combustion Engine
Make - Model KUBOTA /V3300 KUBOTA /V3300 KUBOTA /V3300
50 Rated Horsepower / r.p.m. kW 50 / 2500 50 / 2500 50 / 2500
51 Rated Torque / r.p.m. N-m 226,4 / 1800 226,4 / 1800 226,4 / 1800
52
Number of Cylinder 4 4 4
Piston Displacement cc 3318 3318 3318
Alternator output kW/amp 0,54 / 45 0,54 / 45 0,54 / 45
Fuel Tank Capacity Type liter 70 70 70
55 Transmission
Type Manual Power-shift Manual Power-shift Manual Power-shift
Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1
57 Operating Pressure For attachment MPa 17,7 17,7 17,7
The products manufactures at TCM plant got ISO 9001 & 14001 certificates
CAPACITY / LOADCENTER
STANDARD EQUIPMENT AND
ACCESSORIES
EQUIPMENT
• Adjustable ORS seat with belt
• Asbestos-free brake shoe material
• Cylinder type bonnet latch with locking
function
• Donaldson dry type cyclopac air-cleaner
• Drawbar device
• Durable overhead guard with resin
screen
• Engine auto glow system (Diesel)
• Engine idle-up device (Gasoline)
• Flow control valve
• Fuel water sedimenter (Diesel)
• Full hydrostatic power steering
• Full transistorized ignition (Gasoline)
• Hydraulic oil dipstick
• ITA Class Il carriage
• J-lug pneumatic industrial tires
• Lift circuit cut-off valve
• Load backrest
• Radiator coolant reservoir
• Return hydraulic filter
• Suction hydraulic strainer
• Tilt lock valve
• Transmission oil dipstick
(power shift T/M)
• Transmission oil filter (power shift T/M)
• Wide view two stage mast (VM300)
• 2-spool control valve with pressure relief
• 920mm forks
CONTROLS
• Electric shift control lever
(power shift T/M)
• Lift and tilt levers
• Multi-function switch lever with self-
cancelling mechanism (Lighting & turn-
signal)
• Neutral safety mechanism
• Parking brake lever with inter-lock
• Tilt adjustable steering post
ACCESSORIES
• Access-assisted hand grip
• Back-up buzzer
• Back-up lights
• Deluxe floor mat
• Detachle and portable glove box
• Electric horn
• Front combination lights (turn signal,
clearance)
• Head lights - trafic purpose
• High-mounted rear combination lights
• Operator tool kit
• Pen/ Cup holder
• Side view mirrors
INSTRUMENTS AND SWITCH
• Charge indicator
• Engine oil pressure warning indicator
• Fuel gauge
• Fuel water sedimenter indicator (Diesel)
• Glow indicator (Diesel)
• Hourmeter
• Ignition key engine stop (Diesel)
• Neutral safety switch
• Water temperature gauge
OPTIONAL LOADING
ATTACHMENT
EQUIPMENT
• Alternative fork lengths
• Alternative lengths fork extension sleeve
• Bale clamp
• Carton clamp
• Crane arm
• Drum clamp
• Fork clamp
• Fork positioner hydraulic type (Intgral)
• High, wide type load backrest
• Hinged forks/bucket
• Load push-pull
• Load stabilizer
• Ram attachment
• Rotating forks (Hook-on/Integral type)
• Rotating paper roll clamp
(Hook-on/Integral type)
• Side-shifter (Hook-on/Integral)
• Sleeve-in hook
• Wide type fork carriage
• Wide view full free 2-stage (VFM) mast
• Wide view full free 3-stage (VFHM) mast
OPTIONAL EQUIPMENT AND
ACCESSORIES
EQUIPMENT
• Air Boss tires (TRA)
• Auxiliary hydraulic valve modules
(max. 5spool)
• Central greasing system (CL)
• Color tire (white, green)
• Dual element aircleaner (ADE)
• Exhaust purify catalystic muffler (EPM)
• Fingertip hydraulic valve control
(max. 4spool) (FIT)
• Fishery industry package (FC)
• Front dual drive wheels (DD/SDD)
• Full open cabine (AW 061)
• Head light guard
• Heater (HR)
• Interlock system (travel & load/unload) (SIL)
• Lift lock mechanism (VLL)
• LPG exclusive/Dual fuel (LPG - Gasoline)
package
• Overhead exhaust system (TUE)
• Overhead guard / High profile 2130mm
(HGH060)
• Overhead guard / Low profile 1995mm
(HGL)
• Plate fin type radiator (RAD PF)
• Pre-cleaner engine air intake (CAK B)
• Radiator dust screen (fine, medium
mesh) (DSR)
• Smoke reduction/spark arrester muffler
(Diesel) (CBM)
• Diesel particulate filter exhaust system
• Power clutch (manual T/M)
• Non-slip differential (power shift T/M)
• Steering knob auto-return mechanism
(SRS)
• Unique cushion tires (SE)
NOTES:
• Meets following major standards and code:
ISO 1074 Counter Balanced Lift Trucks, Stability &
Safety Test (Int’l)
ISO 3691 Powered industrial trucks - safety code
JIS D6001 Industrial Lift Trucks (Japan)
JIS D6011 Stability & Safety Test (Japan)
• Overhead guard meets ISO 6055, JIS 6021
• ln conformity with provision of the Machinery Directive
98/37/EC, as amended, and with National implemen-
ting legislation: (European and Scandinavian export
trucks)
• Specifications are subject to change without notice and
its may vary depending on markets.
Please consult your TCM representative for details.
ACCESSORIES
• Custom paint-work
• Fire extinguisher (FE)
• Rear working light
• Rotating warning light (RLY/RLR)
• Tilt cylinder boots (TLB)
INSTRUMENTS AND SWITCH
• Ammeter (AM)
• OK, monitor (fuel level, battery electro-
lyte level,coolant level, parking brake,
air-cleaner, seat-belt)
• Speedometer (SM)
• Torque converter oil pressure gauge
(TPM)
• Torque converter oil temperature gauge
(power shift T/M)
Other on request
ACCESSORIES -- 1.5 - 1.8 ton
STANDARD EQUIPMENT AND
ACCESSORIES
EQUIPMENT
• Asbestos-free brake shoe material
• Donaldson dry type cyclopac air-cleaner
• Radiator coolant reservoir
• Cylinder type bonnet latch with locking
function
• Adjustable ORS seat with belt
• Drawbar device
• Engine idle-up device (Gasoline)
• Engine auto glow system (Diesel)
• Fuel water sedimenter (Diesel)
• Full hydrostatic power steering
• Full transistorized ignition (Gasoline)
• Durable overhead guard with resin
screen
• Wide view two stage mast (VM300)
• Hydraulic oil dipstick
• ITA Class II or class Ill carriage
• J-lug pneumatic industrial tires
• Lift circuit cut-off valve
• Load backrest
• Flow control valve
• Return hydraulic filter
• Suction hydraulic strainer
• Tilt lock valve
• Transmission oil dipstick
(power shift T/M)
• Transmission oil filter (power shift T/M)
• lO7Omm forks
• 2-spool control valve with pressure relief
CONTROLS
• Electric shift control lever
(power shift T/M)
• Lift and tilt levers
• Multi-function switch lever with self-
cancelling mechanism (Lighting & turn-
signal)
• Parking brake lever with inter-lock
• Tilt adjustable steering post
• Neutral safety mechanism
ACCESSORIES
• Back-up buzzer
• Back-up lights
• Deluxe floor mat
• Pen/ Cup holder
• Electric horn
• Access-assisted hand grip
• Front combination lights (turn signal,
clearance)
• Detachle and portable glove box
• Head lights - trafic purpose
• High-mounted rear combination lights
• Operator tool kit
• Side view mirrors
INSTRUMENTS AND SWITCH
• Charge indicator
• Engine oil pressure warning indicator
• Fuel gauge
• Glow indicator (Diesel)
• Hourmeter
• Ignition key engine stop (Diesel)
• Neutral safety switch
• Fuel water sedimenter indicator (Diesel)
• Water temperature gauge
OPTIONAL LOADING
ATTACHMENT
EQUIPMENT
• Bale clamp
• Carton clamp
• Crane arm
• Drum clamp
• Fork clamp
• Alternative lengths fork extension sleeve
• Fork positioner hydraulic type
(Hook-on/Intgral)
• Fork positioner manual type
• High, wide type load backrest
• Hinged forks/bucket
• Load push-pull
• Load stabilizer
• Alternative fork lengths
• Ram attachment
• Rotating forks (Hook-on/Integral type)
• Rotating paper roll clamp
(Hook-on/Integral type)
• Side-shifter(Hook-on/Integral)
• Sleeve-in hook
• Wide type fork carriage
• Wide view full free 2-stage (VFM) mast
• Wide view full free 3-stage (VFHM) mast
• Wide view full free 2-stage 4cyl (VFW)
mast
• Wide view full free 3-stage 4cyl (VFHW)
mast
• Rotating bale clamp
OPTIONAL EQUIPMENT AND
ACCESSORIES
EQUIPMENT
• Auxiliary hydraulic valve modules
(max. 5spool)
• Central greasing system (CL)
• Color tire (white, green)
• Exhaust purify catalystic muffler (EPM)
• Front dual drive wheels (DD/SDD)
• Power clutch (manual T/M)
• Oil clutch (manual T/M)
• Heater (HR)
• Heater & defroster (DEF)
• LPG exclusive/Dual fuel (LPG - Gasoline)
package
• Overhead exhaust system (TUE)
• Smoke reduction/spark arrester muffler
• Unique cushion tires (SE)
• Windshield wiper
• Steel cabin - enclosed type (SCB 001)
• Air-conditioner CFC free (AC)
• Plate fin type radiator (RAD PF)
• Full open cabine (AW 061)
• Radiator dust screen (fine, medium
mesh)
• Pre-cleaner engine air intake (CAK B)
• Dual element aircleaner (ADE)
• Overhead guard! High profile 2130mm
• Diesel particulate filter exhaust system
• Overhead guard! Low profile 1995mm
• Non-slip differential (power shift T/M)
• Fishery industry package (FC)
• Fingertip hydraulic valve control (FIT)
• Cabin - panel type (SCBPA)
• Steering knob auto-return mechanism
(SRS)
• Lift lock mechanism (VLL)
• Interlock system (travel & load/unload)
• Load sensing valve (VLS)
• High capacity radiator - High power
model (RAD PF2)
NOTES:
• Meets following major standards and code:
ISO 1074 Counter Balanced Lift Trucks, Stability &
Safety Test (Int’l)
ISO 3691 Powered industrial trucks - safety code
JIS D6001 Industrial Lift Trucks (Japan)
JIS D6011 Stability & Safety Test (Japan)
• Overhead guard meets ISO 6055, JIS 6021
• ln conformity with provision of the Machinery Directive
98/37/EC, as amended, and with National implemen-
ting legislation: (European and Scandinavian export
trucks)
• Specifications are subject to change without notice and
its may vary depending on markets.
Please consult your TCM representative for details.
ACCESSORIES
• Custom paint-work
• Fire extinguisher (FE)
• Rear working light
• Rotating warning light (RLY/RLR)
• Tilt cylinder boots (TLB)
INSTRUMENTS AND SWITCH
• Ammeter (AM)
• OK, monitor (fuel level, battery electro-
lyte level,coolant level, parking brake,
air-cleaner, seat-belt)
• Speedometer (SM)
• Torque converter oil pressure gauge
(TPM)
• Torque converter oil temperature gauge
(power shift T/M)
Other on request
Features and equipment may vary depending on market
ACCESSORIES 2 - 2.5 - 3 - 3.5 ton

More Related Content

What's hot

Pengenalan kepada steering manual
Pengenalan kepada steering manualPengenalan kepada steering manual
Pengenalan kepada steering manual
enezzo
 
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
uujjfjkkkdmme
 
Permainan bola tampar
Permainan bola tamparPermainan bola tampar
Permainan bola tampar
Afzan Razali
 
Permainan kategori Pukulan dan Memadang
Permainan kategori Pukulan dan MemadangPermainan kategori Pukulan dan Memadang
Permainan kategori Pukulan dan Memadang
Affendi Mustapha
 

What's hot (20)

Ujian hentaman
Ujian hentamanUjian hentaman
Ujian hentaman
 
Merombak gearbox manual
Merombak gearbox manual Merombak gearbox manual
Merombak gearbox manual
 
Pengenalan kepada steering manual
Pengenalan kepada steering manualPengenalan kepada steering manual
Pengenalan kepada steering manual
 
Modul 1 talisawat
Modul 1 talisawatModul 1 talisawat
Modul 1 talisawat
 
Sistem pelinciran
Sistem pelinciranSistem pelinciran
Sistem pelinciran
 
Bearing
BearingBearing
Bearing
 
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...
 
Sistem gantungan
Sistem gantunganSistem gantungan
Sistem gantungan
 
Permainan bola tampar
Permainan bola tamparPermainan bola tampar
Permainan bola tampar
 
Mesin Angkat
Mesin AngkatMesin Angkat
Mesin Angkat
 
Sistem pelinciran edit
Sistem pelinciran editSistem pelinciran edit
Sistem pelinciran edit
 
Suspension
SuspensionSuspension
Suspension
 
Kerja menanggalkan tayar
Kerja menanggalkan tayarKerja menanggalkan tayar
Kerja menanggalkan tayar
 
Ανάλυση επιβαρύνσεων και ετήσια περιοδικότητα προπόνησης ποδοσφαίρου
Ανάλυση επιβαρύνσεων και ετήσια  περιοδικότητα προπόνησης ποδοσφαίρουΑνάλυση επιβαρύνσεων και ετήσια  περιοδικότητα προπόνησης ποδοσφαίρου
Ανάλυση επιβαρύνσεων και ετήσια περιοδικότητα προπόνησης ποδοσφαίρου
 
Alat Alat Pengukuran.ppt
Alat Alat Pengukuran.pptAlat Alat Pengukuran.ppt
Alat Alat Pengukuran.ppt
 
Jenis – jenis sistem gantungan hadapan
Jenis – jenis sistem gantungan hadapanJenis – jenis sistem gantungan hadapan
Jenis – jenis sistem gantungan hadapan
 
Pengenalan Pengukuran dan Penilaian dalam Pendidikan Jasmani
Pengenalan Pengukuran dan Penilaian dalam Pendidikan JasmaniPengenalan Pengukuran dan Penilaian dalam Pendidikan Jasmani
Pengenalan Pengukuran dan Penilaian dalam Pendidikan Jasmani
 
Semester 8 pjm 3182 Kecederaan Dalam Sukan
Semester 8  pjm 3182  Kecederaan Dalam Sukan Semester 8  pjm 3182  Kecederaan Dalam Sukan
Semester 8 pjm 3182 Kecederaan Dalam Sukan
 
Clutch system (Malay)
Clutch system (Malay)Clutch system (Malay)
Clutch system (Malay)
 
Permainan kategori Pukulan dan Memadang
Permainan kategori Pukulan dan MemadangPermainan kategori Pukulan dan Memadang
Permainan kategori Pukulan dan Memadang
 

Similar to Tcmall fg25 t3l

Merlo Panoramic with Stabalizers
Merlo Panoramic with StabalizersMerlo Panoramic with Stabalizers
Merlo Panoramic with Stabalizers
Kurt Harrison
 
Fd g35-50-brochure
Fd g35-50-brochureFd g35-50-brochure
Fd g35-50-brochure
Punya Benja
 

Similar to Tcmall fg25 t3l (20)

Xe nâng bán tự động Yale MP20XD
Xe nâng bán tự động Yale MP20XDXe nâng bán tự động Yale MP20XD
Xe nâng bán tự động Yale MP20XD
 
Merlo Panoramic with Stabalizers
Merlo Panoramic with StabalizersMerlo Panoramic with Stabalizers
Merlo Panoramic with Stabalizers
 
Mitsubishi_FD50-sales-manual.pdf English
Mitsubishi_FD50-sales-manual.pdf EnglishMitsubishi_FD50-sales-manual.pdf English
Mitsubishi_FD50-sales-manual.pdf English
 
S 5500 v
S 5500 vS 5500 v
S 5500 v
 
P h50 h80_1100_br_396-02_en_si
P h50 h80_1100_br_396-02_en_siP h50 h80_1100_br_396-02_en_si
P h50 h80_1100_br_396-02_en_si
 
hyster h25xms9h30xmh32xm16ch-20-v1g
 hyster h25xms9h30xmh32xm16ch-20-v1g hyster h25xms9h30xmh32xm16ch-20-v1g
hyster h25xms9h30xmh32xm16ch-20-v1g
 
6-CRANE-수정
6-CRANE-수정6-CRANE-수정
6-CRANE-수정
 
E100 TRX TRG SERIES
E100 TRX TRG SERIESE100 TRX TRG SERIES
E100 TRX TRG SERIES
 
Hyster h1.5 xt h3.5xt
Hyster h1.5 xt h3.5xtHyster h1.5 xt h3.5xt
Hyster h1.5 xt h3.5xt
 
Tgf e 100
Tgf e 100Tgf e 100
Tgf e 100
 
Xe nang toyota
Xe nang toyotaXe nang toyota
Xe nang toyota
 
Fb10 12-en(b8c)
Fb10 12-en(b8c)Fb10 12-en(b8c)
Fb10 12-en(b8c)
 
Fb10 12-en(b8c)
Fb10 12-en(b8c)Fb10 12-en(b8c)
Fb10 12-en(b8c)
 
ซ่อมรถโฟล์คลิฟท์Heftrucks mitsubishi fd15tf16c
ซ่อมรถโฟล์คลิฟท์Heftrucks mitsubishi fd15tf16cซ่อมรถโฟล์คลิฟท์Heftrucks mitsubishi fd15tf16c
ซ่อมรถโฟล์คลิฟท์Heftrucks mitsubishi fd15tf16c
 
Br0000027 hyster r1.4-2.5
Br0000027   hyster r1.4-2.5Br0000027   hyster r1.4-2.5
Br0000027 hyster r1.4-2.5
 
TCM FB 1.8-3.5 Ton điện.pdf
TCM FB 1.8-3.5 Ton điện.pdfTCM FB 1.8-3.5 Ton điện.pdf
TCM FB 1.8-3.5 Ton điện.pdf
 
Fd g35-50-brochure
Fd g35-50-brochureFd g35-50-brochure
Fd g35-50-brochure
 
Xe nâng dầu Yale GDP/GLP 40-55VX
Xe nâng dầu Yale GDP/GLP 40-55VXXe nâng dầu Yale GDP/GLP 40-55VX
Xe nâng dầu Yale GDP/GLP 40-55VX
 
Tcm fb25 8
Tcm fb25 8Tcm fb25 8
Tcm fb25 8
 
A series mini range pallet stacker double column II
A series mini range pallet stacker double column IIA series mini range pallet stacker double column II
A series mini range pallet stacker double column II
 

More from SAMCO VINA

More from SAMCO VINA (20)

Xe nâng ngồi lái kho TCM 1.5 – 2 tấn
Xe nâng ngồi lái kho TCM 1.5 – 2 tấnXe nâng ngồi lái kho TCM 1.5 – 2 tấn
Xe nâng ngồi lái kho TCM 1.5 – 2 tấn
 
Xe nâng điện đứng lái pallet BT 2 – 2.4 tấn
Xe nâng điện đứng lái pallet BT 2 – 2.4 tấnXe nâng điện đứng lái pallet BT 2 – 2.4 tấn
Xe nâng điện đứng lái pallet BT 2 – 2.4 tấn
 
Xe nâng điện đứng lái Linde 2 tấn – 5.2m
Xe nâng điện đứng lái Linde 2 tấn – 5.2mXe nâng điện đứng lái Linde 2 tấn – 5.2m
Xe nâng điện đứng lái Linde 2 tấn – 5.2m
 
Xe nâng bán tự động Yale MP20
Xe nâng bán tự động Yale MP20Xe nâng bán tự động Yale MP20
Xe nâng bán tự động Yale MP20
 
Xe nâng bán tự động Yale MPB040-E
Xe nâng bán tự động Yale MPB040-EXe nâng bán tự động Yale MPB040-E
Xe nâng bán tự động Yale MPB040-E
 
Xe nâng dầu Yale 15-35MX
Xe nâng dầu Yale 15-35MXXe nâng dầu Yale 15-35MX
Xe nâng dầu Yale 15-35MX
 
Xe nâng dầu Yale GP040
Xe nâng dầu Yale GP040Xe nâng dầu Yale GP040
Xe nâng dầu Yale GP040
 
Xe nâng điện bán tự động Noblift PS05F
Xe nâng điện bán tự động Noblift PS05FXe nâng điện bán tự động Noblift PS05F
Xe nâng điện bán tự động Noblift PS05F
 
Xe nâng điện ngồi lái CAT 2.5 tấn
Xe nâng điện ngồi lái CAT 2.5 tấnXe nâng điện ngồi lái CAT 2.5 tấn
Xe nâng điện ngồi lái CAT 2.5 tấn
 
Xe nâng điện ngồi lái Toyota 2.8 tấn
Xe nâng điện ngồi lái Toyota 2.8 tấnXe nâng điện ngồi lái Toyota 2.8 tấn
Xe nâng điện ngồi lái Toyota 2.8 tấn
 
Xe nâng điện ngồi lái Toyota 1.8 tấn
Xe nâng điện ngồi lái Toyota 1.8 tấnXe nâng điện ngồi lái Toyota 1.8 tấn
Xe nâng điện ngồi lái Toyota 1.8 tấn
 
Xe nâng lối đi hẹp Aisle Master 1.6m
Xe nâng lối đi hẹp Aisle Master 1.6mXe nâng lối đi hẹp Aisle Master 1.6m
Xe nâng lối đi hẹp Aisle Master 1.6m
 
Xe nâng điện Toyota 1.5 tấn
Xe nâng điện Toyota 1.5 tấnXe nâng điện Toyota 1.5 tấn
Xe nâng điện Toyota 1.5 tấn
 
Xe nâng điện cũ Toyota 2.5 tấn
Xe nâng điện cũ Toyota 2.5 tấnXe nâng điện cũ Toyota 2.5 tấn
Xe nâng điện cũ Toyota 2.5 tấn
 
Catalogo tecnico-reach-toyota-bt-8 fbr
Catalogo tecnico-reach-toyota-bt-8 fbrCatalogo tecnico-reach-toyota-bt-8 fbr
Catalogo tecnico-reach-toyota-bt-8 fbr
 
Xe nâng điện BT 2 tấn
Xe nâng điện BT 2 tấnXe nâng điện BT 2 tấn
Xe nâng điện BT 2 tấn
 
Xe nang dien dung lai
Xe nang dien dung laiXe nang dien dung lai
Xe nang dien dung lai
 
Xe nâng kho Reach Truck Linde 6.5
Xe nâng kho Reach Truck Linde 6.5Xe nâng kho Reach Truck Linde 6.5
Xe nâng kho Reach Truck Linde 6.5
 
Xe nang dien dung lai toyota
Xe nang dien dung lai toyotaXe nang dien dung lai toyota
Xe nang dien dung lai toyota
 
Xe nang linde
Xe nang lindeXe nang linde
Xe nang linde
 

Recently uploaded

Final DBMS Manual (2).pdf final lab manual
Final DBMS Manual (2).pdf final lab manualFinal DBMS Manual (2).pdf final lab manual
Final DBMS Manual (2).pdf final lab manual
BalamuruganV28
 

Recently uploaded (20)

Electrical shop management system project report.pdf
Electrical shop management system project report.pdfElectrical shop management system project report.pdf
Electrical shop management system project report.pdf
 
Diploma Engineering Drawing Qp-2024 Ece .pdf
Diploma Engineering Drawing Qp-2024 Ece .pdfDiploma Engineering Drawing Qp-2024 Ece .pdf
Diploma Engineering Drawing Qp-2024 Ece .pdf
 
Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf
Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdfInstruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf
Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf
 
Supermarket billing system project report..pdf
Supermarket billing system project report..pdfSupermarket billing system project report..pdf
Supermarket billing system project report..pdf
 
Intelligent Agents, A discovery on How A Rational Agent Acts
Intelligent Agents, A discovery on How A Rational Agent ActsIntelligent Agents, A discovery on How A Rational Agent Acts
Intelligent Agents, A discovery on How A Rational Agent Acts
 
NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024
NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024
NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024
 
Electrostatic field in a coaxial transmission line
Electrostatic field in a coaxial transmission lineElectrostatic field in a coaxial transmission line
Electrostatic field in a coaxial transmission line
 
Quiz application system project report..pdf
Quiz application system project report..pdfQuiz application system project report..pdf
Quiz application system project report..pdf
 
Filters for Electromagnetic Compatibility Applications
Filters for Electromagnetic Compatibility ApplicationsFilters for Electromagnetic Compatibility Applications
Filters for Electromagnetic Compatibility Applications
 
Multivibrator and its types defination and usges.pptx
Multivibrator and its types defination and usges.pptxMultivibrator and its types defination and usges.pptx
Multivibrator and its types defination and usges.pptx
 
Final DBMS Manual (2).pdf final lab manual
Final DBMS Manual (2).pdf final lab manualFinal DBMS Manual (2).pdf final lab manual
Final DBMS Manual (2).pdf final lab manual
 
Fabrication Of Automatic Star Delta Starter Using Relay And GSM Module By Utk...
Fabrication Of Automatic Star Delta Starter Using Relay And GSM Module By Utk...Fabrication Of Automatic Star Delta Starter Using Relay And GSM Module By Utk...
Fabrication Of Automatic Star Delta Starter Using Relay And GSM Module By Utk...
 
Operating System chapter 9 (Virtual Memory)
Operating System chapter 9 (Virtual Memory)Operating System chapter 9 (Virtual Memory)
Operating System chapter 9 (Virtual Memory)
 
EMPLOYEE MANAGEMENT SYSTEM FINAL presentation
EMPLOYEE MANAGEMENT SYSTEM FINAL presentationEMPLOYEE MANAGEMENT SYSTEM FINAL presentation
EMPLOYEE MANAGEMENT SYSTEM FINAL presentation
 
Introduction to Arduino Programming: Features of Arduino
Introduction to Arduino Programming: Features of ArduinoIntroduction to Arduino Programming: Features of Arduino
Introduction to Arduino Programming: Features of Arduino
 
The battle for RAG, explore the pros and cons of using KnowledgeGraphs and Ve...
The battle for RAG, explore the pros and cons of using KnowledgeGraphs and Ve...The battle for RAG, explore the pros and cons of using KnowledgeGraphs and Ve...
The battle for RAG, explore the pros and cons of using KnowledgeGraphs and Ve...
 
E-Commerce Shopping using MERN Stack where different modules are present
E-Commerce Shopping using MERN Stack where different modules are presentE-Commerce Shopping using MERN Stack where different modules are present
E-Commerce Shopping using MERN Stack where different modules are present
 
5G and 6G refer to generations of mobile network technology, each representin...
5G and 6G refer to generations of mobile network technology, each representin...5G and 6G refer to generations of mobile network technology, each representin...
5G and 6G refer to generations of mobile network technology, each representin...
 
Geometric constructions Engineering Drawing.pdf
Geometric constructions Engineering Drawing.pdfGeometric constructions Engineering Drawing.pdf
Geometric constructions Engineering Drawing.pdf
 
BRAKING SYSTEM IN INDIAN RAILWAY AutoCAD DRAWING
BRAKING SYSTEM IN INDIAN RAILWAY AutoCAD DRAWINGBRAKING SYSTEM IN INDIAN RAILWAY AutoCAD DRAWING
BRAKING SYSTEM IN INDIAN RAILWAY AutoCAD DRAWING
 

Tcmall fg25 t3l

  • 1. I.C. ENGINE POWERED FORKLIFT TRUCK Counter-Balance Type 1,5 - 3,5 ton Havelange Forklifts, Havelange Forklifts, driven by service driven by service www.havelangeforklifts.be FG15C13 / FG15T13 / FHG15C3 / FHG15T3 FD15C13 / FD15T13 / FHD15C3 / FHD15T3 / FHD15C3Z / FHD15T3Z FG18C13 / FG18T13 / FHG18C3 / FHG18T3 FD18C13 / FD18T13 / FHD18C3 / FHD18T3 / FHD18C3Z / FHD18T3Z FG20C3 / FG20T3 / FHG20C3 / FHG20T3 FD20C3 / FD20T3 / FD20C3Z / FD20T3Z / FHD20C3 / FHD20T3 FG25C3 / FG25T3 / FHG25C3 / FHG25T3 FD25C3 / FD25T3 / FD25C3Z / FD25T3Z / FHD25C3 / FHD25T3 FG30C3 / FG30T3 / FHG30C3 / FHG30T3 FD30C3 / FD30T3 / FD30C3Z / FD30T3Z / FHD30C3 / FHD30T3 FD35T3S
  • 2. ENHANCED OPERATOR COMFORT SUBSTANTIALLY REDUCED VIBRATION BY ADOPTING DUAL-FLOATING SYSTEMS FOR BOTH THE ENGINE AND HOOD Minimizes the transfer of vibration to the operator, with four- point rubber cushion absorbers between the seat and engine and its transmission. Moreover, use of the same four-point suspension adopted in the hood, realizing a dual effect in reducing vehicle vibrations. GENERAL EXPANSIVE FLOOR SPACE FOR EASIER FOOT MANEUVERING An amazing 45% increase in floor space by placing tilt cylinders under the floor. This gives a smooth footwell in addition to easy entry and exit. MORE CONVENIENT PARKING LEVER The lever is positioned to the right of the steering wheel for easier entry and exit. A double-action brake release on the lever further improves safety. EXTRA ENTRY AND EXIT FROM AN EXTRA-WIDE STEP -- 55% WIDER The secure step with enlarged foot space enables greater comfort and less fatigue while entering and exiting the vehicle. MULTIFUNCTIONAL SUSPENSION SEAT (available for 1.5/1.8 ton high power & 2/3.5 ton models) Features include reinforced driver support, reduced vibration, operator weight balance adjusting, forward and backward reclining, a rear utility pocket and seat belt. RESIN SCREEN The resin screen on the overhead guard enables comfortable outdoor operation in wet weather.
  • 3. SUPERIOR MANEUVERABILITY AND ASSURED SAFETY INNOVATIVE FORK-LANDING MECHANISM (available for wide view two-stage mast) The fork-lowering speed decelerates at a height of approximately 150mm above the ground enabling accurate placement of the forks into the load fork pockets or pallet. REDUCED FATIGUE DUE TO A SEMI-CIRCULAR STEERING WHEEL A smaller diameter (300mm outer diameter) steering wheel gives improved vehicle maneuverability. In addition, this compact steering wheel makes it much easier to get on and off the truck. METER PANEL OPTIMALLY LOCATED TO THE RIGHT OF THE DRIVER’S SEAT The meter panel is located on the top right side of the dashboard for easier readability by the operator. MULTI-CONE SYNCHRONIZER SHIFT LEVERS The newly adopted levers enable smooth shifting from both forward and reverse (available for manual transmission models). ANTI-ROLL MECHANISM FOR ASSURED SAFETY DURING TURNING (available for 2-3.5 ton models) Warning: This system does not guarantee accident avoidance or prevention of vehicle overturning. NEUTRAL SAFETY MECHANISM This feature enhances safety of operation. The engine cannot be started unless the change lever is in the neutral position. HIGH-MOUNT REAR COMBINATION LIGHTS The rear combination lights are installed on the top left and right sides of the overhead guard for easier recognition by on-site workers. ANTI-SLIP MAT ON THE HOOD A rubber strip is attached to the hood to prevent slippage while stepping on and off. METER PANEL WITH LCD INDICATORS The LCD has a longer life and is easy to read even during daylight shift operation. EXCELLENT OPERATOR VISIBILITY • Wider forward visibility Clearer visibility of the fork tips -- 50% improvement over other current models. This achievement was made possible by lowering the dashboard by 70mm and the tie bar by 190mm. A remarkable improvement of the forward view along with quicker recognition of the fork position. An operator- friendly design with assured safety, high efficiency and relaxing feel. • Amazing backward visibility Reshaped counter weight for better rearview sight. The round shape of the rear top end of the counterweight substantially improves visibility for increased safety during backward movement.
  • 4. RUGGEDNESS AND INCREASED DURABILITY 5% IMPROVED FRONT AND REAR STABILITY RATIO (available for 2-3.5 ton models) Stable and more consistent cargo handling as well as travel due to an improved stability ratio. STURDIER MAST Minimized distortion of the mast by redesigned positioning the mast supports and tilt cylinders. TCM’s traditional robust mast was further upgraded by adopting sturdier tie bars, while maintaining a wide range of viewing angles. IMPROVED DURABILITY WITH LUBRICANT FILLED LIFT CYLINDER Oil filled lift cylinders give improved durability. (available for 2-3.5 ton models) SINGLE-PIECE HEADGUARD The front and rear pillars as well as roof are all welded together in a single-piece construction to give additional strenght to the entire structure. COOLER RUNNING THROUGH IMPROVED AIRFLOW Optimal positioning of the fan, radiator and muffler has reduced the operating coolant temperature (gasoline models). The operating temperature of the hydraulic oil has been reduced, also by 10°C by upgrading the mechanical components and circuitry. TCM TRANSMISSIONS TCM designed and developped these transmissions for quiet operation and maximum durability, and TCM builds them to insure the highest quality. TCM STEERING AXLES Also a new TCM design, the steer axle has been strengthened and improved for durability in demanding applications.
  • 5. EASY MAINTENANCE AND ENVIRONMENT FRIENDLINESS DETACHABLE SIDE COVERS FOR CONVENIENT INSPECTION AND SIMPLE MAINTENANCE Inspection and maintenance can more easily be performed due to one-touch detachable side covers and a wide-opening hood. INTEGRAL LAYOUT OF ELECTRICAL PARTS AND OTHER SYSTEM DEVICES Maintenance inspections can be performed more easily, as electrical parts such as the fuse box, relay and battery are neatly integrated into a conveniently compact area. NEW ENGINES, COMPLIANT WITH WORLDWIDE 2nd STAGE EMISSION REGULATIONS Powerful, yet appropriate, diesel engines, compliant with stringent global emissions regulations. ONE-PIECE FLOORBOARD Gives more convenient inspection and easier maintenance, as the one-piece floorboard unit is easily detachable without using any tools. NEW OPTIONAL EQUIPMENT • Three-stage mast with four- cylinder mechanism (available for 2-3 ton models) The cylinders are symmetrically located to the left and right for improved forward visibility. • Integral Side Shifter A major improvement in the integral side shifter ensures less load loss and improved forward visibility. • Low-noise mast (available for 2-3 ton models) Reduced noise from the fork and carriage significantly reduces chain shudder. • Lift Lock With the engine is off, the forks cannot be lowered, even when the operator is in the seat. • Interlock System This safety device allows traveling and loading/unloading only when the operator is in the seat. PORTABLE GLOVE BOX Detachable and portable. CUP HOLDER Convenient for keeping cups, pens and other small items.
  • 6. OTHER OPTIONAL EQUIPMENT Rotating warning light Rear working light Overhead exhaust system Windshield wiper Cabin-panel type (available for 2-3.5 ton models) Heater LPG exclusive/Dual fuel (LPG/gasoline) package Pre-cleaner engine air intake Steel cabin-enclosed type with air-cooler (available for 2-3.5 ton models) Head light guard Air Boss tire * As far as the detailed optional information is concerned, please refer to the specification sheets. For various types of attachments, please also refer to the “attachment catalogue” which is separately prepared from this sales catalogue.
  • 7. 1,5 ton FG15C13 FD15C13 FHD15C3 FG15T13 FD15T13 FHD15T3 FHG15C3 FHD15C3Z FHG15T3 FHD15T3Z 1,8 ton FG18C13 FD18C13 FHD18C3 FG18T13 FD18T13 FHD18T3 FHG18C3 FHD18C3Z FHG18T3 FHD18T3Z 2,0 ton FG20C3 FD20C3 FHD20C3 FG20T3 FD20T3 FHD20T3 FHG20C3 FD20C3Z FHG20T3 FD20T3Z 2,5 ton FG25C3 FD25C3 FHD25C3 FG25T3 FD25T3 FHD25T3 FHG25C3 FD25C3Z FHG25T3 FD25T3Z 3,0 ton FG30C3 FD30C3 FHD30C3 FG30T3 FD30T3 FHD30T3 FHG30C3 FD30C3Z FHG30T3 FD30T3Z 3,5 ton FD35T3S TCM has been engaged in manufacturing various forklift truck models that take into account the needs and requirements of our valued cutomers. Now, TCM proudly presents the ‘iNOMA series’ with such benefits as enhanced operator comfort, superior safety assurance, ruggedness and increased durability as well as easy maintenance and envirnment friendliness. These notable benefits are backed by TCM’s many years of experience and superb technological innovations, and TCM is confident in placing the full ‘iNOMA series’ product line on variaus job sites in markets around the world.
  • 8. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (1) ServiceWeight (kg) FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 Lowered Raised with Backrest FG15T3 FG15C3 FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2475 2505 2585 2635 2650 2730 VM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2490 2520 2600 2650 2665 2745 VM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2510 2540 2620 2670 2685 2765 VM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2525 2555 2635 2685 2700 2780 VM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2540 2570 2650 2700 2715 2795 VM375 1500 1500 1750 1750 3750 2370 4780 6 / 6 *6 / 12 2555 2585 2665 2715 2730 2810 VM400 1500 1500 1650 *1750 1650 *1750 4000 2545 5030 6 / 6 *6 / 12 2595 2625 2705 2755 2770 2850 VM425 1400 *1500 1400 *1500 1500 *1750 1500 *1750 4250 2670 5280 6 / 6 *6 / 12 2615 2645 2725 2775 2790 2870 VM450 1400 1400 1500 *1650 1500 *1650 4500 2795 5530 6 / 6 *6 / 12 2625 2655 2735 2785 2800 2880 VM475 1000 *1350 1000 *1350 1000 *1500 1000 *1500 4750 2920 5780 6 / 6 *6 / 6 2540 2670 2750 2800 2815 2895 VM500 1000 *1350 1000 *1350 1000 *1500 1000 *1500 5000 3045 6030 6 / 6 *6 / 6 2660 2690 2770 2820 2835 2915 VM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2715 2745 2825 2875 2890 2970 VM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2745 2775 2855 2905 2920 3000 Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (1) ServiceWeight (kg) FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z Lowered Raised with Backrest FHG15T3 FHG15C3 FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2475 2505 2585 2635 2650 2730 VM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2490 2520 2600 2650 2665 2745 VM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2510 2540 2620 2670 2685 2765 VM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2525 2555 2635 2685 2700 2780 VM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2540 2570 2650 2700 2715 2795 VM375 1500 1500 1750 1750 3750 2370 4780 6 / 6 *6 / 12 2555 2585 2665 2715 2730 2810 VM400 1500 1500 1650 *1750 1650 *1750 4000 2545 5030 6 / 6 *6 / 12 2595 2625 2705 2755 2770 2850 VM425 1400 *1500 1400 *1500 1500 *1750 1500 *1750 4250 2670 5280 6 / 6 *6 / 12 2615 2645 2725 2775 2790 2870 VM450 1400 1400 1500 *1650 1500 *1650 4500 2795 5530 6 / 6 *6 / 12 2625 2655 2735 2785 2800 2880 VM475 1000 *1350 1000 *1350 1000 *1500 1000 *1500 4750 2920 5780 6 / 6 *6 / 6 2540 2670 2750 2800 2815 2895 VM500 1000 *1350 1000 *1350 1000 *1500 1000 *1500 5000 3045 6030 6 / 6 *6 / 6 2660 2690 2770 2820 2835 2915 VM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2715 2745 2825 2875 2890 2970 VM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2745 2775 2855 2905 2920 3000 SPECIFICATIONS -- 1,5 - 1,8 ton Wide view Mast VM NOTE: (1) Weight for diesel model: +30kg NOTE: (1) Weight for diesel model: +110kg (TD 27)
  • 9. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) ServiceWeight (kg) FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 (1) Lowered (2) Raised with Backrest FG15T3 FG15C3 FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2510 2540 2620 2670 2685 2765 VFM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2525 2555 2635 2685 2700 2780 VFM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2545 2575 2655 2705 2720 2800 VFM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2565 2595 2675 2725 2740 2820 VFM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2575 2605 2685 2735 2750 2830 VFM375 1500 1500 1750 1750 3750 2370 4780 6 / 6 *6 / 12 2590 2620 2700 2750 2765 2845 VFM400 1500 1500 1650 *1750 1650 *1750 4000 2545 5030 6 / 6 *6 / 12 2640 2670 2750 2800 2815 2895 VFM425 1400 *1500 1400 *1500 1500 *1750 1500 *1750 4250 2670 5280 6 / 6 *6 / 12 2660 2690 2770 2820 2835 2915 VFM450 1400 1400 1500 *1650 1500 *1650 4500 2795 5530 6 / 6 *6 / 12 2675 2705 2785 2835 2850 2930 VFM475 1000 *1350 1300 *1350 1000 *1500 1300 *1500 4750 2920 5780 6 / 6 *6 / 6 2690 2720 2800 2850 2865 2945 VFM500 1000 *1350 1200 *1350 1000 *1500 1200 *1500 5000 3045 6030 6 / 6 *6 / 6 2705 2735 2815 2865 2880 2960 VFM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2765 2795 2875 2925 2940 3020 VFM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2800 2830 2910 2960 2975 3055 Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) ServiceWeight (kg) FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z (1) Lowered (2) Raised with Backrest FHG15T3 FHG15C3 FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFM250 1500 1500 1750 1750 2500 1745 3530 6 / 10 2510 2540 2620 2670 2685 2765 VFM270 1500 1500 1750 1750 2700 1845 3730 6 / 10 2525 2555 2635 2685 2700 2780 VFM300 1500 1500 1750 1750 3000 1995 4030 6 / 12 2545 2575 2655 2705 2720 2800 VFM330 1500 1500 1750 1750 3300 2145 4330 6 / 12 2565 2595 2675 2725 2740 2820 VFM350 1500 1500 1750 1750 3500 2245 4530 6 / 12 2575 2605 2685 2735 2750 2830 VFM375 1500 1500 1750 1750 3750 2370 4780 6 / 6 *6 / 12 2590 2620 2700 2750 2765 2845 VFM400 1500 1500 1650 *1750 1650 *1750 4000 2545 5030 6 / 6 *6 / 12 2640 2670 2750 2800 2815 2895 VFM425 1400 *1500 1400 *1500 1500 *1750 1500 *1750 4250 2670 5280 6 / 6 *6 / 12 2660 2690 2770 2820 2835 2915 VFM450 1400 1400 1500 *1650 1500 *1650 4500 2795 5530 6 / 6 *6 / 12 2675 2705 2785 2835 2850 2930 VFM475 1000 *1350 1300 *1350 1000 *1500 1300 *1500 4750 2920 5780 6 / 6 *6 / 6 2690 2720 2800 2850 2865 2945 VFM500 1000 *1350 1200 *1350 1000 *1500 1200 *1500 5000 3045 6030 6 / 6 *6 / 6 2705 2735 2815 2865 2880 2960 VFM550 *1100 *1100 *1300 *1300 5500 3345 6530 *3 / 6 2765 2795 2875 2925 2940 3020 VFM600 *800 *800 *1000 *1000 6000 3595 7030 *3 / 6 2800 2830 2910 2960 2975 3055 Wide view Full Free 2-stage Mast VFM NOTE: (1) For height without backrest: -470mm. (2) For free lift without backrest: +470mm. Weight for without backrest: -20kg. (3) Weight for diesel model: +30kg NOTE: (1) For height without backrest: -470mm. (2) For free lift without backrest: +470mm. Weight for without backrest: -20kg. (3) Weight for diesel model: +110kg (TD27)
  • 10. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) ServiceWeight (kg) FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z (1) Lowered (2) Raised with Backrest FHG15T3 FHG15C3 FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFHM360 1400 1400 1600 1600 3600 1745 4630 6 / 6 2635 2665 2745 2795 2810 2890 VFHM400 1400 1400 1600 1600 4000 1870 5030 6 / 6 2660 2690 2770 2820 2835 2915 VFHM435 1350 *1400 1350 *1400 1550 *1600 1600 *1600 4350 1995 5380 6 / 6 *6 / 6 2685 2715 2795 2845 2860 2940 VFHM480 1300 *1350 1350 *1350 1400 *1550 1450 *1550 4800 2145 5830 6 / 6 *6 / 6 2710 2740 2820 2870 2885 2965 VFHM500 1100 *1300 1300 *1300 1150 *1500 1350 *1500 5000 2245 6030 6 / 6 *6 / 6 2730 2760 2840 2890 2905 2985 VFHM540 850 *1250 1100 *1250 900 *1400 1100 *1400 5400 2370 9430 3 / 6 *3 / 6 2750 2780 2860 2910 2925 3005 VFHM600 550 *1100 750 *1100 550 *1250 750 *1250 6000 2595 7030 3 / 6 *3 / 6 2815 2845 2925 2975 2990 3070 VFHM650 *950 *950 *1100 *1100 6500 2810 7530 *3 / 3 2860 2890 2970 3020 3035 3115 VFHM700 *750 *750 *750 *750 7000 3030 8030 *3 / 3 2900 2930 3010 3060 3075 3155 Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) ServiceWeight (kg) FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 (1) Lowered (2) Raised with Backrest FG15T3 FG15C3 FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFHM360 1400 1400 1600 1600 3600 1745 4630 6 / 6 2635 2665 2745 2795 2810 2890 VFHM400 1400 1400 1600 1600 4000 1870 5030 6 / 6 2660 2690 2770 2820 2835 2915 VFHM435 1350 *1400 1350 *1400 1550 *1600 1600 *1600 4350 1995 5380 6 / 6 *6 / 6 2685 2715 2795 2845 2860 2940 VFHM480 1300 *1350 1350 *1350 1400 *1550 1450 *1550 4800 2145 5830 6 / 6 *6 / 6 2710 2740 2820 2870 2885 2965 VFHM500 1100 *1300 1300 *1300 1150 *1500 1350 *1500 5000 2245 6030 6 / 6 *6 / 6 2730 2760 2840 2890 2905 2985 VFHM540 850 *1250 1100 *1250 900 *1400 1100 *1400 5400 2370 9430 3 / 6 *3 / 6 2750 2780 2860 2910 2925 3005 VFHM600 550 *1100 750 *1100 550 *1250 750 *1250 6000 2595 7030 3 / 6 *3 / 6 2815 2845 2925 2975 2990 3070 VFHM650 *950 *950 *1100 *1100 6500 2810 7530 *3 / 3 2860 2890 2970 3020 3035 3115 VFHM700 *750 *750 *750 *750 7000 3030 8030 *3 / 3 2900 2930 3010 3060 3075 3155 NOTE: (1) For height without backrest: -505mm. (2) For free lift without backrest: +500mm. Weight without backrest: -20kg. (3) Weight for diesel model: +30kg NOTE: (1) For height without backrest: -505mm. (2) For free lift without backrest: +500mm. Weight without backrest: -20kg. (3) Weight for diesel model: +110kg (TD27) Wide view Full Free 3-stage Mast VFHM NOTE: Rated Capacity with (*): Shows capacity with front dual tires. Service Weight of VM/VFM 550 - 600 and of VFHM 650 - 700 represents the weight of vehicles equipped with “special dual tires”. Lifting Speed withVFM/VFHM Mast: For FG/FD15T13 - FG/FD15C13 - FG/FD18T3 - FG/FD18C3 - FG15T3/C3 - FG18T3/C withVFM FG 470mm/s with load. 550mm/s without load. FD 420mm/s with load. 490mm/s without load. withVFHM FG 530mm/s with load. 610mm/s without load. FD 480mm/s with load. 540mm/s without load. For FHG15T3/C - FHD15T3Z/C3Z - FHG18T3/C3 - FHD18T3Z/C3Z - FHG15T3/C3 - FHG18T3/C withVFM FG 480mm/s with load. 560mm/s without load. FD 420mm/s with load. 540mm/s without load. withVFHM FG 540mm/s with load. 620mm/s without load. FD 560mm/s with load. 600mm/s without load. Lowering speed withVFM/VFHM mast: 420mm/s with load. 370mm/s without load. OverallVehicle lenght withVFM mast: +10mm longer than of STD model withVM mast withVFHM mast: +25mm longer than of STD model withVM mast
  • 11. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) ServiceWeight (kg) FG / FD 20 FG / FD 25 Lowered (1) Raised with Backrest FG / FD 20 FG / FD 25 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM250 2000 2000 2500 2500 2500 1780 3530 6 / 10 3170 3275 3290 3530 3635 3650 VM270 2000 2000 2500 2500 2700 1880 3730 6 / 10 3185 3290 3305 3545 3650 3665 VM300 2000 2000 2500 250 3000 2030 4030 6 / 12 3210 3315 3330 3570 3675 3690 VM330 2000 2000 2500 2500 3300 2180 4330 6 / 12 3235 3340 3355 3595 3700 3715 VM350 2000 2000 2500 2500 3500 2280 4530 6 / 12 3250 3355 3370 3610 3715 3730 VM375 2000 2000 2500 2500 3750 2405 4780 6 / 6 *6 / 12 3270 3375 3390 3630 3735 3750 VM400 2000 2000 2500 2500 4000 2580 5030 6 / 6 *6 / 12 3325 3430 3445 3685 3790 3805 VM425 1950 *2000 1950 *2000 2450 *2500 2450 *2500 4250 2705 5280 6 / 6 *6 / 12 3345 3450 3465 3705 3810 3825 VM450 1900 *1950 1900 *1950 2150 *2450 2350 *2450 4500 2830 5530 6 / 6 *6 / 12 3365 3470 3485 3725 3830 3845 VM475 1800 *1850 1800 *1850 1850 *2350 2200 *2350 4750 2955 5780 6 / 6 *6 / 6 3385 3490 3505 3745 3850 3865 VM500 1650 *1700 1650 *1700 1700 *2250 2000 *2250 5000 3080 6030 6 / 6 *6 / 6 3405 3510 3525 3765 3870 3885 VM550 *1500 *1500 *1700 *1700 5500 3380 6530 *3 / 6 3480 3585 3600 3840 3945 3960 VM600 *1300 *1300 *1400 *1400 6000 3630 7030 *3 / 6 3520 3625 3640 3880 3985 4000 SPECIFICATIONS -- 2 - 2,5 - 3 ton Wide view Mast VM NOTE: (3) Weight for diesel model: +130kg (TD27) +110kg (C240) Wide view Full Free 2-stage Mast VFM NOTE: (1) For height without backrest: -385mm. (2) For free lift without backrest: +385mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Mast Model Rated Capacity 500mm:load center (kg) FG / D20 FG / D25 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle FG20 FG25 (3) ServiceWeight (kg) (2) Free Lift with Backrest PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFM250 2000 2000 2500 2500 2500 1780 3530 780 6 - 10 3225 3330 3345 3585 3690 3705 VFM270 2000 2000 2500 2500 2700 1880 3730 880 6 - 10 3245 3350 3365 3605 3710 3725 VFM300 2000 2000 2500 2500 3000 2030 4030 1030 6 - 12 3270 3375 3390 3630 3735 3750 VFM330 2000 2000 2500 2500 3300 2180 4330 1180 6 - 12 3295 3400 3415 3655 3760 3775 VFM350 2000 2000 2500 2500 3500 2280 4530 1280 6 - 12 3310 3415 3430 3670 3775 3790 VFM375 2000 2000 2500 2500 3750 2405 4780 1405 6 - 6 3330 3435 3450 3690 3795 3810 *6 - 12 VFM400 2000 2000 2500 2500 4000 2580 5030 1580 6 - 6 3390 3495 3510 3750 3855 3870 *6 - 12 VFM425 1950 1950 2450 2450 4250 2705 5280 1705 6 - 6 3410 3515 3530 3770 3875 3890 *2000 *2000 *2500 *2500 *6 -12 VFM450 1900 1900 2150 2350 4500 2830 5530 1830 6 - 6 3435 3540 3555 3795 3900 3915 *1950 *1950 *2450 *2450 *6 - 12 VFM475 1800 1800 1850 2200 4750 2955 5780 1955 6 - 6 3455 3560 3575 3815 3920 3935 *1850 *1850 *2350 *2350 *6 - 6 VFM500 1650 1700 1700 2000 5000 3080 6030 2080 6 - 6 3475 3580 3595 3835 3940 3955 *1700 *2250 *2250 *6 - 6 VFM550 *1500 *1500 *1700 *1700 5500 3380 6530 2380 *3 - 6 3555 3660 3675 3915 4020 4035 VFM600 *1300 *1300 *1400 *1400 6000 3630 7030 2630 *3 - 6 3595 3700 3715 3955 4060 4075
  • 12. NOTE: (1) For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Wide view Full Free 3-stage Mast VFHM Mast Model Rated Capacity 500mm:load center (kg) FG / D20 FG / D25 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle F/B FG20 FG25 (3) ServiceWeight (kg) (2) Free Lift with Backrest NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Serves Weight ofVM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”. Loading Speed withVFM/VFHM Mast: withVFM FG 480mm/s with load. 520mm/s without load. FD 540mm/s with load. 590mm/s without load. withVFHM FG 500mm/s with load. 540mm/s without load. FD 560mm/s with load. 610mm/s without load. Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load. OverallVehicle lenght withVFHM mast: +15mm longer than that of STD model withVM/FM mast PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFHM360 2000 2000 2500 2500 3600 1780 4630 780 6 - 6 3365 3470 3485 3725 3830 3845 *6 - 10 VFHM400 2000 2000 2500 2500 4000 1905 5030 905 6 - 6 3395 3500 3515 3755 3860 3875 *6 - 10 VFHM435 1900 1900 2200 2300 4350 2030 5380 1030 6 - 6 3425 3530 3545 3785 3890 3905 *2000 *2000 *2400 *2400 *6 - 10 VFHM480 1700 1800 1900 2200 4800 2180 5830 1180 6 - 6 3455 3560 3575 3815 3920 3935 *1900 *1900 *2300 *2300 *6 - 10 VFHM500 1500 1750 1600 2000 5000 2280 6030 1280 6 - 6 3480 3585 3600 3840 3945 3960 *1800 *1800 *2250 *2250 *6 - 10 VFHM540 1200 1650 1300 1700 5400 2405 6430 1405 3 - 6 3510 3615 3630 3870 3975 3990 *1750 *1750 *2150 *2150 *3 - 6 VFHM600 900 1100 950 1100 6000 2630 7030 1630 3 - 6 3605 3710 3725 3965 4070 4085 *1650 *1650 *1800 *1800 *3 - 6 VFHM650 *1500 *1500 *1550 *1550 6500 2845 7530 1845 *3 - 3 3660 3765 3780 4020 4125 4140 VFHM700 *1250 *1250 *1250 *1250 7000 3065 8030 2065 *3 - 3 3715 3820 3835 4075 4180 4195
  • 13. NOTE: (1) For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Wide view Full Free 3-stage Mast VFHW (4 CYLINDER) NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed withVFM/VFHM Mast: withVFM FG 450mm/s with load. 490mm/s without load. FD 520mm/s with load. 570mm/s without load. withVFHM FG 460mm/s with load. 510mm/s without load. FD 540mm/s with load. 590mm/s without load. Lowering speed withVFM/VFHM mast: 420mm/s with load. 380mm/s without load. OverallVehicle lenght withVFW/VFHW (4CYLINDER) mast: +35mm longer than that of STD model withVM mast Mast Model Rated Capacity 500mm:load center (kg) FG / D20 FG / D25 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle F/B FG20 FG25 (3) ServiceWeight (kg) (2) Free Lift with Backrest NOTE: (1) For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Wide view Full Free 2-stage Mast VFW (4 CYLINDER) Mast Model Rated Capacity 500mm:load center (kg) FG / D20 FG / D25 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle F/B FG20 FG25 (3) ServiceWeight (kg) (2) Free Lift with Backrest PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFW300 1900 1900 2400 2400 3000 2045 4030 1045 6 - 12 3280 3385 3505 3640 3745 3865 VFW330 1900 1900 2400 2400 3300 2195 4330 1195 6 - 12 3310 3415 3535 3670 3775 3895 VFW350 1900 1900 2400 2400 3500 2295 4530 1295 6 - 12 3325 3430 3550 3685 3790 3910 VFW375 1800 1800 2350 2350 3750 2420 4780 1420 *6 - 6 3350 3455 3575 3710 3815 3935 *1900 *1900 6 - 12 VFW400 1800 1800 2300 2300 4000 2595 5030 1595 *6 - 6 3410 3515 3635 3770 3875 3995 *1900 *1900 *2350 *2350 6 - 12 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VHW435 1800 1850 2200 2300 4350 2045 5380 1045 *6 - 6 3425 3530 3650 3785 3890 4010 *1900 *1900 *2400 *2400 6 - 10 VHW480 1700 1800 1900 2200 4800 2195 5830 1195 *6 - 6 3470 3575 3695 3830 3935 4055 *1900 *1900 *2300 *2300 6 - 10 VHW500 1500 1750 1600 2000 5000 2295 6030 1295 *6 - 6 3495 3600 3720 3855 3960 4080 *1800 *1800 *2250 *2250 6 - 10 VHW540 1200 1650 1300 1700 5400 2420 6430 1420 3 - 6 3520 3625 3745 3880 3985 4105 *1750 *1750 *2150 *2150 VHW550 1150 1600 1250 1600 5500 2460 6530 1460 3 - 6 3530 3635 3755 3890 3995 4115 *1750 *1750 *2100 *2100
  • 14. NOTE: (3) Weight for diesel model: +140kg (TD27) +120kg (C240) Mast Model Rated Capacity 500mm:load center (kg) FG / D30 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle F/B (3) ServiceWeight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD VM250 3000 3000 2500 1820 3760 6 - 10 4210 4245 4360 VM270 3000 3000 2700 1920 3960 6 - 10 4225 4260 4375 VM300 3000 3000 3000 2075 4260 6 - 12 4250 4285 4400 VM330 3000 3000 3300 2225 4560 6 - 12 4275 4310 4425 VM350 3000 3000 3500 2325 4760 6 - 12 4290 4325 4440 VM375 3000 3000 3750 2450 5010 6 - 6 4310 4345 4460 *6 - 12 VM400 3000 3000 4000 2625 5260 6 - 6 4370 4405 4520 *6 - 12 VM425 2900 3000 4250 2750 5510 6 - 6 4390 4425 4540 *3000 *6 - 12 VM450 2800 3000 4500 2875 5760 6 - 6 4410 4445 4560 *3000 *6 - 12 VM475 2750 2950 4750 3000 6010 6 - 6 4430 4465 4580 *2900 *2900 *6 - 6 VM500 2700 2850 5000 3125 6260 *6 - 6 4455 4490 4605 *2850 *2850 6 - 6 VM550 *2400 *2400 5500 3425 6760 *3 - 6 4530 4565 4680 VM600 *2000 *2000 6000 3675 7260 *3 - 6 4570 4605 4720 Wide view Mast VM Wide view Full Free 2-stage Mast VFM NOTE: (1) For height without backrest: -540mm. (2) For free lift without backrest: +540mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) Mast Model Rated Capacity 500mm:load center (kg) FG / D30 Max. Fork Height Overall Mast Height Lowered (1) Raised with Backrest Tilting Angle F/B (3) ServiceWeight (kg) FG30 (2) Free lift with Backrest PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VM250 3000 3000 2500 1820 3760 600 6 - 10 4210 4245 4360 VM270 3000 3000 2700 1920 3960 700 6 -10 4225 4260 4375 VM300 3000 3000 3000 2075 4260 850 6 - 12 4250 4285 4400 VM330 3000 3000 3300 2225 4560 1000 6 - 12 4275 4310 4425 VM350 3000 3000 3500 2325 4760 1100 6 - 12 4290 4325 4440 VM375 3000 3000 3750 2450 5010 1225 6 - 6 4310 4345 4460 *6 - 12 VM400 3000 3000 4000 2625 5260 1400 6 - 6 4370 4405 4520 *6 - 12 VM425 2900 3000 4250 2750 5510 1525 6 - 6 4390 4425 4540 *3000 *6 - 12 VM450 2800 3000 4500 2875 5760 1650 6 - 6 4410 4445 4560 *3000 *6 - 12 VM475 2750 2950 4750 3000 6010 1775 6 - 6 4430 4465 4580 *2900 *2900 6 - 6 VM500 2700 2850 5000 3125 6260 1900 *6 - 6 4455 4490 4605 *2850 *2850 6 - 6 VM550 *2400 *2400 5500 3425 6760 2200 *3 - 6 4530 4565 4680 VM600 *2000 *2000 6000 3675 7260 2450 *3 - 6 4570 4605 4720
  • 15. NOTE: (1) For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) Wide view Full Free 3-stage Mast VFHM NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Serves Weight ofVM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”. Lifting Speed withVFM/VFHM Mast: withVFM FG 420mm/s with load. 440mm/s without load. FD 460mm/s with load. 530mm/s without load. withVFHM FG 430mm/s with load. 450mm/s without load. FD 480mm/s with load. 550mm/s without load. Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load. OverallVehicle lenght withVFHM mast: +15mm longer than that of STD model withVM/FM mast Mast Model Rated Capacity 500mm:load center (kg) FG / D30 Max. Fork Height Lowered (1) Raised with Backrest Tilting Angle F/B FG30 (2) Free lift with Backrest Overall Mast Height (3) ServiceWeight (kg) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VFHM360 3000 3000 3600 1825 4860 600 6 - 6 4395 4430 4545 *6 - 10 VFHM400 3000 3000 4000 1950 5260 725 6 - 6 4425 4460 4575 *6 - 10 VFHM435 2900 2900 4350 2075 5610 850 6 - 6 4460 4495 4610 *3000 *3000 *6 - 10 VFHM480 2800 2800 4800 2225 6060 1000 6 - 6 4495 4530 4645 *2900 *2900 *6 - 10 VFHM500 2600 2750 5000 2325 6260 1100 6 - 6 4520 4555 4670 *2750 *2750 *6-10 VFHM540 1900 2500 5400 2450 6660 1225 3 - 6 4555 4590 4705 *2650 *2650 *3 - 6 VFHM600 1400 1850 6000 2675 7260 1450 3 - 6 4650 4685 4800 *2100 *2100 *3 - 6 VFHM650 *1700 *1700 6500 2890 7760 1665 *3 - 3 4715 4750 4865 VFHM700 *1350 *1350 7000 3110 8260 1885 *3 - 3 4770 4805 4920
  • 16. NOTE: (1) For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) NOTE: (1) For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed withVFM/VFHM Mast: withVFM FG 360mm/s with load. 420mm/s without load. FD 430mm/s with load. 500mm/s without load. withVFHM FG 380mm/s with load. 430mm/s without load. FD 450mm/s with load. 520mm/s without load. Lowering speed withVFM/VFHM mast: 400mm/s with load. 350mm/s without load. OverallVehicle lenght withVFHM mast: +35mm/+45mm longer than that of STD model withVM mast Mast Model Rated Capacity 500mm:load center (kg) FG / D30 Max. Fork Height Lowered (1) Raised with Backrest Tilting Angle F/B FG30 (2) Free lift with Backrest Overall Mast Height (3) ServiceWeight (kg) Wide view Full Free 2-Stage Mast VFW (4CYLINDER) Mast Model Rated Capacity 500mm:load center (kg) FG / D30 Max. Fork Height Lowered (1) Raised with Backrest Tilting Angle F/B FG30 (2) Free lift with Backrest Overall Mast Height (3) ServiceWeight (kg) Wide view Full Free 3-Stage Mast VFHW (4CYLINDER) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VFW300 2900 2900 3000 2125 4260 900 6 - 12 4310 4345 4495 VFW330 2900 2900 3300 2275 4560 1050 6 - 12 4335 4370 4520 VFW350 2900 2900 3500 2375 4760 1150 6 - 12 4355 4390 4540 VFW375 2900 2900 3750 2500 5010 1275 6 - 6 4375 4410 4560 *6 - 12 VFW400 2900 2900 4000 2675 5260 1450 6 - 6 4440 4475 4625 *6 - 12 PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VHW435 2800 2900 4350 2125 5610 900 6 - 6 4470 4505 4655 *2900 *6 - 10 VHW480 2700 2800 4800 2275 6060 1050 6 - 6 4510 4545 4695 *2800 *6 - 10 VHW500 2600 2750 5000 2375 6260 1150 6 - 6 4535 4570 4720 *2750 *6 - 10 VHW540 1900 2500 5400 2500 6660 1275 3 - 6 4565 4600 4750 *2650 *2650 VHW550 1900 2350 5500 2540 6760 1315 3 - 6 4575 4610 4760 *2600 *2600
  • 17. Wide view Mast VM NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +45mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. / For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -180mm. / For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. / Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130kg. Wide view Full Free 2-stage Mast VFM Mast Model Rated Capacity 500mm:load center (kg) FHG / D20T3 FHG / D20C3 Max. Fork Height Overall Mast Height (1) Lowered (2) Raised with Backrest Tilting Angle F/B (4) ServiceWeight (kg) FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 (3) Free lift with Backrest FHG 20T3 FHG 20C3 FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 NOTE: (1) Figures for (2t; 2,5t model). For (3t model) +45mm (2) Weight for diesel model: (2t model) +120kg, (2,5t model) +120kg, (3t model) +130 kg. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height (1) Lowered Raised with Backrest Tilting Angle F/B (2) ServiceWeight (kg) FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 FHG 20T3 FHG 20C3 FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD S DD SDD VM250 2000 2000 2500 2500 3000 3000 2500 1780 3530 6 - 10 3180 3285 3300 3540 3645 3660 4220 4255 4370 VM270 2000 2000 2500 2500 3000 3000 2700 1880 3730 6 - 10 3195 3300 3315 3555 3660 3675 4235 4270 4385 VM300 2000 2000 2500 2500 3000 3000 3000 2030 4030 6 - 12 3220 3325 3340 3580 3685 3700 4260 4295 4410 VM330 2000 2000 2500 2500 3000 3000 3300 2180 4330 6 - 12 3245 3350 3365 3605 3710 3725 4285 4320 4435 VM350 2000 2000 2500 2500 3000 3000 3500 2280 4530 6 - 12 3260 3365 3380 3620 3725 3740 4300 4335 4450 VM375 2000 2000 2500 2500 3000 3000 3750 2405 4780 6 - 6 3280 3385 3400 3640 3745 3760 4320 4355 4470 *6 - 12 VM400 2000 2000 2500 2500 3000 3000 4000 2580 5030 6 - 6 3335 3440 3455 3695 3800 3815 4380 4415 4530 *6 - 12 VM425 1950 1950 2450 2450 2900 3000 4250 2705 5280 6 - 6 3355 3460 3475 3715 3820 3835 4400 4435 4550 *2000 *2000 *2500 *2500 *3000 *6 - 12 VM450 1900 1900 2150 2350 2800 3000 4500 2830 5530 6 - 6 3375 3480 3495 3735 3840 3855 4420 4455 4570 *1950 *1950 *2450 *2450 *3000 *6 - 12 VM475 1800 1800 1850 2200 2750 2950 4750 2955 5780 6 - 6 3395 3500 3515 3755 3860 3875 4440 4475 4590 *1850 *1850 *2350 *2350 *2900 *2900 *6 - 6 VM500 1650 1700 1700 2000 2700 2850 5000 3080 6030 6 - 6 3415 3520 3535 3775 3880 3895 4465 4500 4615 *1700 *2250 *2250 *2850 *6 - 6 VM550 *1500 *1500 *1700 *1700 *2400 *2400 5500 3380 6530 *3 - 6 3490 3595 3610 3850 3955 3970 4540 4575 4690 VM600 *1300 *1300 *1400 *1400 *2000 *2000 6000 3630 7030 *3 - 6 3530 3635 3650 3890 3995 4010 4580 4615 4730 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VM250 2000 2000 2500 2500 3000 3000 2500 1780 3530 780 6 - 10 3235 3340 3355 3595 3700 3715 4260 4295 4410 VM270 2000 2000 2500 2500 3000 3000 2700 1880 3730 880 6 - 10 3255 3360 3375 3615 3720 3735 4275 4310 4425 VM300 2000 2000 2500 2500 3000 3000 3000 2030 4030 1030 6 - 12 3280 3385 3400 3640 3745 3760 4305 4340 4455 VM330 2000 2000 2500 2500 3000 3000 3300 2180 4330 1180 6 - 12 3305 3410 3425 3665 3770 3785 4330 4365 4480 VM350 2000 2000 2500 2500 3000 3000 3500 2280 4530 1280 6 - 12 3320 3425 3440 3680 3785 3800 4345 4380 4495 VM375 2000 2000 2500 2500 3000 3000 3750 2405 4780 1405 6 - 6 3340 3445 3460 3700 3805 3820 4370 4405 4520 *6 - 12 VM400 2000 2000 2500 2500 3000 3000 4000 2580 5030 1580 6 - 6 3400 3505 3520 3760 3865 3880 4435 4470 4585 *6 - 12 VM425 1950 1950 2450 2450 2900 3000 4250 2705 5280 1705 6 - 6 3420 3525 3540 3780 3885 3900 4455 4490 4605 *2000 *2000 *2500 *2500 *3000 *6 - 12 VM450 1900 1900 2150 2350 2800 3000 4500 2830 5530 1830 6 - 6 3445 3550 3565 3805 3910 3925 4475 4510 4625 *1950 *1950 *2450 *2450 *3000 *6 - 12 VM475 1800 1800 1850 2200 2750 2950 4750 2955 5780 1955 6 - 6 3465 3570 3585 3825 3930 3945 4500 4535 4650 *1850 *1850 *2350 *2350 *2900 *2900 *6 - 6 VM500 1650 1700 1700 2000 2700 2850 5000 3080 6030 2080 6 - 6 3485 3590 3605 3845 3950 3965 4520 4555 4670 *1700 *2250 *2250 *2850 *6 - 6 VM550 *1500 *1500 *1700 *1700 *2400 *2400 5500 3380 6530 2380 *3 - 6 3565 3670 3685 3925 4030 4045 4605 4640 4755 VM600 *1300 *1300 *1400 *1400 *2000 *2000 6000 3630 7030 2630 *3 - 6 3605 3710 3725 3965 4070 4085 4650 4685 4800
  • 18. NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +45mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -180mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Wide view Full Free 3-stage Mast VFHM NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Service weight of VM/VFM 550 - 600 and ofVFHM 650 - 700 represents the weight of vehicles equipped with “SDD: special dual tires”. Lifting Speed withVFM/VFHM Mast: withVFM FG (2t, 2.5t model) 530mm/s with load. 560mm/s without load. FD (2t, 2.5t model) 550mm/s with load. 580mm/s without load. FG (3t model) 450mm/s with load. 470mm/s without load. FD (3t model) 470mm/s with load. 490mm/s without load. withVFHM FG (2t, 2.5t model) 560mm/s with load. 580mm/s without load. FD (2t, 2.5t model) 570mm/s with load. 600mm/s without load. FG (3t model) 460mm/s with load. 480mm/s without load. FD (3t model) 480mm/s with load. 500mm/s without load. Lowering speed withVFM/VFHM mast: (2t, 2.5t model) 400mm/s with load. 350mm/s without load. OverallVehicle lenght withVFM mast: +15mm longer than of STD model withVM mast Mast Model Rated Capacity 500mm:load center (kg) FHG / D20T3 FHG / D20C3 Max. Fork Height Overall Mast Height (1) Lowered (2) Raised with Backrest Tilting Angle F/B (4) ServiceWeight (kg) FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 (3) Free lift with Backrest FHG 20T3 FHG 20C3 FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VFHM360 2000 2000 2500 2500 3000 3000 3600 1780 4630 780 6 - 6 3375 3480 3495 3735 3840 3855 4405 4440 4555 *6 - 10 VFHM400 2000 2000 2500 2500 3000 3000 4000 1905 5030 905 6 - 6 3405 3510 3525 3765 3870 3885 4435 4470 4585 *6 - 10 VFHM435 1900 1900 2200 2300 2900 2900 4350 2030 5380 1030 6 - 6 3435 3540 3555 3795 3900 3915 4470 4505 4620 *2000 *2000 *2400 *2400 *3000 *3000 *6 - 10 VFHM480 1700 1800 1900 2200 2800 2800 4800 2180 5830 1180 6 - 6 3465 3570 3585 3825 3930 3945 4505 4540 4655 *1900 *1900 *2300 *2300 *2900 *2900 *6 - 10 VFHM500 1500 1750 1600 2000 2600 2750 5000 2280 6030 1280 6 - 6 3490 3595 3610 3850 3955 3970 4530 4565 4680 *1800 *1800 *2550 *2250 *2750 *2750 *6 - 10 VFHM540 1200 1650 1300 1700 1900 2500 5400 2405 6430 1405 3 - 6 3520 3625 3640 3880 3985 4000 4565 4600 4715 *1750 *1750 *2150 *2150 *2650 *2650 *3 - 6 VFHM600 900 1100 950 1100 1400 1850 6000 2630 7030 1630 3 - 6 3615 3720 3735 3975 4080 4095 4660 4695 4810 *1650 *1650 *1800 *1800 *2100 *2100 *3 - 6 VFHM650 *1500 *1500 *1550 *1550 *1700 *1700 6500 2845 7530 1845 *3 - 3 3670 3775 3790 4030 4135 4150 4725 4760 4875 VFHM700 *1250 *1250 *1250 *1250 *1350 *1350 7000 3065 8030 2065 *3 - 3 3725 3830 3845 4085 4190 4205 4780 4815 4930
  • 19. NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed withVFM/VFHM Mast: withVFM FG (2t, 2.5t model) 450mm/s with load. 490mm/s without load. FD (2t, 2.5t model) 510mm/s with load. 540mm/s without load. FG (3t model) 410mm/s with load. 470mm/s without load. FD (3t model) 430mm/s with load. 460mm/s without load. withVFHM FG (2t, 2.5t model) 460mm/s with load. 510mm/s without load. FD (2t, 2.5t model) 530mm/s with load. 560mm/s without load. FG (3t model) 430mm/s with load. 460mm/s without load. FD (3t model) 450mm/s with load. 480mm/s without load. Lowering speed withVFM/VFHM mast: (2t, 2.5t, 3t model) 400mm/s with load. 350mm/s without load. OverallVehicle lenght withVFW/VFHW (4cylinder) mast (2t, 2,5t model): +35mm longer than of STD model withVM mast (3t model): +35mm/+45mm longer than of STD model withVM mast NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +80mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -145mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Wide view Full Free 2-stage Mast VFW (4CYLINDER) Wide view Full Free 3-stage Mast VFHW (4CYLINDER) NOTE: (1) Figures for (2t, 2.5t model); For (3t model) +80mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -145mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Mast Model Rated Capacity 500mm:load center (kg) FHG / D20T3 FHG / D20C3 Max. Fork Height Overall Mast Height (1) Lowered (2) Raised with Backrest Tilting Angle F/B (4) ServiceWeight (kg) FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 (3) Free lift with Backrest FHG 20T3 FHG 20C3 FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 Mast Model Rated Capacity 500mm:load center (kg) FHG / D20T3 FHG / D20C3 Max. Fork Height Overall Mast Height (1) Lowered (2) Raised with Backrest Tilting Angle F/B (4) ServiceWeight (kg) FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 (3) Free lift with Backrest FHG 20T3 FHG 20C3 FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VFW300 1900 1900 2400 2400 2900 2900 3000 2045 4030 1045 6 - 12 3290 3395 3515 3650 3755 3875 4320 4355 4505 VFW330 1900 1900 2400 2400 2900 2900 3300 2195 4330 1195 6 - 12 3320 3425 3545 3680 3785 3905 4345 4380 4530 VFW350 1900 1900 2400 2400 2900 2900 3500 2295 4530 1295 6 - 12 3335 3440 3560 3695 3800 3920 4365 4400 4550 VFW375 1800 1800 2350 2350 2900 2900 3750 2420 4780 1420 *6 - 6 3360 3465 3585 3720 3825 3945 4385 4420 4570 *1900 *1900 6 - 12 VFW400 1800 1800 2300 2300 2900 2900 4000 2595 5030 1595 *6 - 6 3420 3525 3645 3780 3885 4005 4450 4485 4635 *1900 *1900 *2350 *2350 6 - 12 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VHW435 1800 1850 2200 2300 2800 2900 4350 2045 5380 1045 *6 - 6 3435 3540 3660 3795 3900 4020 4480 4515 4665 *1900 *1900 *2400 *2400 *2900 6 - 10 VHW480 1700 1800 1900 2200 2700 2800 4800 2195 5830 1195 *6 - 6 3480 3585 3705 3840 3945 4065 4520 4555 4705 *1900 *1900 *2300 *2300 *2800 6 - 10 VHW500 1500 1750 1600 2000 2600 2750 5000 2295 6030 1295 *6 - 6 3505 3610 3730 3865 3970 4090 4545 4580 4730 *1800 *1800 *2250 *2250 *2750 6 - 10 VHW540 1200 1650 1300 1700 1900 2500 5400 2420 6430 1420 3 - 6 3530 3635 3755 3890 3995 4115 4575 4610 4760 *1750 *1750 *2150 *2150 *2650 *2650 VHW550 1150 1600 1250 1600 1900 2350 5500 2460 6530 1460 3 - 6 3540 3645 3765 3900 4005 4125 4585 4620 4770 *1750 *1750 *2100 *2100 *2600 *2600
  • 20. Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height Tilting Angle F / B (3) Service weight (kg) FD35T3S Lowered (1) Raised with Backrest FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm deg S DD VM250 3500 3500 2500 1885 3760 6 / 10 4890 4905 VM270 3500 3500 2700 1985 3960 6 / 10 4910 4925 VM300 3500 3500 3000 2135 4260 6 / 12 4940 4955 VM330 3500 3500 3300 2285 4560 6 / 12 4970 4985 VM350 3500 3500 3500 2385 4760 6 / 12 4990 5005 VM375 3500 3500 3750 2510 5010 6 / 6 – *6 / 12 5010 5025 VM400 3500 3500 4000 2685 5260 6 / 6 – *6 / 12 5080 5095 VM425 3500 3500 4250 2810 5510 6 / 6 – *6 / 12 5105 5120 VM450 3400 3450 4500 2935 5760 6 / 6 – *6 / 12 5125 5140 VM475 3400 3400 4750 3060 6010 6 / 6 5150 5165 VM500 3300 3350 5000 3185 6020 6 / 6 5175 5190 VM550 *3200 *3200 5500 3485 6760 *3 / 6 — 5265 VM600 *2400 *2400 6000 3735 7260 *3 / 6 — 5310 SPECIFICATIONS -- 3,5 ton Wide view Mast VM NOTE: (1) For height without backrest: -445mm (2) For free lift without backrest: +455mm Weight for diesel model: -30kg Wide View Full Free 2-stage Mast VFM Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height (2) Free lift with Backrest Tilting Angle F / B (3) Service weight (kg) FD35T3S Lowered (1) Raised with Backrest FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD VFM250 3500 3500 2500 1885 3760 655 6 / 10 4890 4995 VFM270 3500 3500 2700 1985 3960 755 6 / 10 5000 5015 VFM300 3500 3500 3000 2135 4260 905 6 / 12 5030 5045 VFM330 3500 3500 3300 2285 4560 1055 6 / 12 5065 5080 VFM350 3500 3500 3500 2385 4760 1155 6 / 12 5085 5100 VFM375 3500 3500 3750 2510 5010 1280 6 / 6 – *6 / 12 5115 5130 VFM400 3500 3500 4000 2685 5260 1455 6 / 6 – *6 / 12 5185 5200 VFM425 3500 3500 4250 2810 5510 1580 6 / 6 – *6 / 12 5215 5230 VFM450 3400 3450 4500 2935 5760 1705 6 / 6 – *6 / 12 5240 5255 VFM475 3400 3400 4750 3060 6010 1830 6 / 6 5265 5280 VFM500 3300 3350 5000 3185 6020 1955 6 / 6 5295 5310 VFM550 *3200 *3200 5500 3485 6760 2255 *3 / 6 — 5390 VFM600 *2400 *2400 6000 3735 7260 2505 *3 / 6 — 5445 Wide View Full Free 3-stage Mast VFHM Mast Model Rated Capacity 500mm:load center (kg) Max. Fork Height Overall Mast Height (2) Free lift with Backrest Tilting Angle F / B (3) Service weight (kg) FD35T3S Lowered (1) Raised with Backrest FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD VFHM 360 3400 3400 3600 1885 4860 655 6 / 6 – *6 / 10 5095 5110 VFHM 400 3400 3400 4000 2010 5260 780 6 / 6 – *6 / 10 5130 5145 VFHM 435 3300 3300 4350 2135 5610 905 6 / 6 – *6 / 10 5160 5175 VFHM 480 3200 3250 4800 2285 6060 1055 6 / 6 – *6 / 10 5200 5215 VFHM 500 3100 3200 5000 2385 6260 1155 6 / 6 – *6 / 10 5230 5245 VFHM 540 2500 - *2900 2700 - *2900 5400 2510 6660 1280 3 / 6 – *3 / 6 5260 5275 VFHM 600 1600 - *2400 2000 - *2400 6000 2735 7260 1505 3 / 6 – *3 / 6 5370 5385 VFHM 650 *2000 *2000 6500 2950 7760 1720 3 / 6 — 5435 VFHM 700 *1600 *1600 7000 3170 8260 1940 3 / 6 — 5495 NOTE: (1) For height without backrest: -530mm (2) For free lift without backrest: +530mm Weight for diesel model: -30kg NOTE: Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed withVFM/VFHM Mast: withVFM 530mm/s with load. 560mm/s without load. withVFHM 560mm/s with load. 580mm/s without load. Lowering speed withVFM/VFHM mast: 440mm/s with load. 380mm/s without load. OverallVehicle lenght withVFHM mast: +15mm longer than of STD model withVM/VFM mast
  • 21. STANDARD DIMENSIONS (Front Single Tire) Model FD/FG15 • FHD/FHG15 FD/FG18 • FHD/FHG18 mm mm Overall height, Fork raised (with backrest) 4030 4030 Max. fork height 3000 3000 Mast height, Fork lowered 1995 1995 Backrest height 1000 1000 Free lift 155 155 Fork thickness 35 35 Min. ground clearance 125 125 Overall length (with fork) 3165 3195 Length to fork face 2245 2275 Fork length 920 920 Load distance 395 395 Wheelbase 1425 1425 Rear overhang 425 455 Drawbar Pin Center Height 495 495 Overhead guard clearance (from face of seat)** FD / FG15 • 18 = 1035 FHD / FHG15 • 18 = 1005 Overall height (overhead guard)** 2070 2070 Overall width 1070 1100 Fork spread (outside) 200 - 920 200 - 920 Tread (front) 890 920 Tread (rear) 920 920 Fork width 100 100 Inside turning radius 110 95 Outside turning radius 1980 2010 Min. intersecting aisle 1780 1800 Tilt angles (forward-backward) 6° - 12° 6° - 12° Model FD/FG15 • FHD/FHG15 FD/FG18 • FHD/FHG18 Tire size (front dual Type: DD) 4 x 4,50 - 12 - 8PR JL mm mm Overall width 1255 1255 Tread (front) 980 980 Inside turning radius 90 90 Outside turning radius 2020 2050 Min. intersecting aisle 1840 1860 Tire size (front dual Type: SDD) 4 x 6,50 - 10 - 10PR JL mm mm Overall width 1512 1512 Tread (front) 1110 1110 Inside turning radius 90 90 Outside turning radius 2095 2120 Min. intersecting aisle 1940 1960 DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option) ** European (EXE) and Scandinavian export trucks (EXN): +60mm GROUND CLEARANCE FD/FG15 FD/FG18 FHD/FHG15 FHD/FHG18 mm mm Mast 110 110 Frame 105 105 Front axle 125 125 Rear axle 125 125 Counter weight 135 135
  • 22. STANDARD DIMENSIONS (Front Single Tire) Model FD/FG20 • FHD/FHG20 FD/FG25 • FHD/FHG25 FD/FG30 • FHD/FHG30 FD35T3S mm mm mm mm Overall height, Fork raised (with backrest) 4030 4030 4260 4255 Max. fork height 3000 3000 3000 3000 Mast height, Fork lowered 2030 2030 2075 2135 Backrest height 1000 1000 1220 1220 Free lift 105 110 165 170 Fork thickness 36 40 45 50 Min. ground clearance 125 125 145 145 Overall length (with fork) 3555 3625 3775 3870 Length to fork face 2485 2555 2705 2800 Fork length 1070 1070 1070 1070 Load distance 450 450 480 495 Wheelbase 1600 1600 1700 1700 Rear overhang 435 505 525 605 Drawbar Pin Center Height 530 530 560 610 Overhead guard clearance (from face of seat)** 1005 1005 1005 1005 Overall height (overhead guard)** 2070 2070 2090 2140 Overall width 1150 1150 1225 1290 Fork spread (outside) 245 - 1020 245 - 1020 250 - 1090 300 - 1090 Tread (front) 970 970 1000 1060 Tread (rear) 970 970 970 970 Fork width 122 122 125 150 Inside turning radius 160 160 200 200 Outside turning radius 2170 2240 2400 2470 Min. intersecting aisle 2210 2230 2330 2390 Tilt angles (forward-backward) 6° - 12° 6° - 12° 6° - 12° 6° - 12° Model FD/FG20 • FHD/FHG20 FD/FG25 • FHD/FHG25 FD/FG30 • FHD/FHG30 FD35T3S Tire size (front dual Type: DD) 4 x 5,50 - 15 - 8PR (l) 4 x 6,00 - 15 - 10PR (l) mm mm mm mm Overall width 1480 1480 1520 1600 Tread (front) 1130 1130 1170 1600 Inside turning radius 100 100 100 100 Outside turning radius 2240 2310 2430 2540 Min. intersecting aisle 2320 2340 2445 2500 Tire size (front dual Type: SDD) 4 x 7,00 - 12 - 12PR (l) 4 x 28 x 9 - 15 - 12PR (l) — mm mm mm mm Overall width 1590 1590 1950 — Tread (front) 1190 1190 1435 — Inside turning radius 100 100 100 — Outside turning radius 2280 2350 2500 — Min. intersecting aisle 2350 2370 2490 — DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option) ** European (EXE) and Scandinavian export trucks (EXN): +60mm GROUND CLEARANCE FD/FG20-25 FHD/FHG20 - 25 FD/FG30 FHD/FHG30 FD35T3S mm mm mm Mast 110 140 145 Frame 120 145 190 Front axle 125 145 165 Rear axle 150 175 85 Counter weight 155 185 225
  • 23. STANDARD SPECIFICATIONS Gasoline -- 1,5 - 1,8 ton *Computed values I Manufacturer TCM 2 Model FG15C13 FG15T13 FG18C13 FG18T13 3 Load Capacity kg 1500 1750 4 Load Center mm 500 5 Power Type Gasoline 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum Fork Height mm 3000 10 Free Lift mm 155 13 Fork Size L x W x T mm 920 x 100 x 35 Fork Spread (Outside) Max. / Min. mm 920 / 200 14 Tilt Angle Fwd / Bwd deg 6 - 12 15 Length to Fork Face mm 2245 2275 16 Overall Width mm 1070 1100 17 Mast Height Fork Lowered mm 1995 18 Mast Height Fork Raised mm 4030 19 Overhead Guard Height (EXB, EXK) mm 2070 Overhead Guard Height (EXC, EXE, EXN) mm 2130 20 Operator’s Seat Height mm 1015 21 Turning Radius (Outside) mm 1980 2010 22 Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm 425 455 23 Basic Right Angle Stacking Aisle Width mm 3685 3715 (Add load length and clearance) 24 Speeds Travel Max. Full load km/h 14.0 / 14.0 (Fwd/Rvs.) No load km/h 14.5 / 14.5 25 Lifting Full load mm/s 590 No load mm/s 670 26 Lowering Full load mm/s 450 No load mm/s 550 28 Max. Drawbar Pull Full load kN 9.3 14.5 9.3 14.5 No load kN 6.9 30 Max. Gradeability* Full load % 24 29 20 24 No load % 18 32 Total Weight kg 2510 2670 33 Weight Distribution Full load Front kg 3510 3880 Rear kg 500 540 34 No load Front kg 1070 1030 Rear kg 1440 1640 35 Tires Number Front / Rear 2 / 2 36 Size Front 6.50 - 10 10PR 37 Rear 5.00 - 8 - 8PR 38 Wheelbase mm 1425 39 Tread Front mm 890 920 Rear mm 920 Backrest Height mm 1045 Overhead Guard Clearance mm 1035 Counterweight Height mm 1110 Drawbar Pin Center Height mm 495 Step Height / Floor Height mm 420 / 650 40 Underclearance Min. with load mm 100 41 Center of Wheelbase mm 110 42 Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / 28 49 Internal Combustion Engine Make/Model NISSAN K15 Rated Horsepower / r.p.m. kW 25.0 / 2250 Rated Torque / r.p.m. N•m 110.2 / 1600 51 Number of Cylinder 4 52 Piston Displacement cc 1486 Alternator output kW/Amp 0.60 / 50 Fuel Tank Capacity Type lit 50 55 Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1 57 Operating Pressure For Attachments MPa (psi) 17.7 Characteristics Dimensions Performance Weight Chassis Engine and Transmission
  • 24. *Computed values I Manufacturer TCM 2 Model FHG15C3 FHG15T3 FHG18C3 FHG18T3 3 Load Capacity kg 1500 1750 4 Load Center mm 500 5 Power Type Gasoline 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum Fork Height mm 3000 10 Free Lift mm 155 13 Fork Size L x W x T mm 920 x 100 x 35 Fork Spread (Outside) Max. / Min. mm 920 / 200 14 Tilt Angle Fwd / Bwd deg 6 - 12 15 Length to Fork Face mm 2245 2275 16 Overall Width mm 1070 1100 17 Mast Height Fork Lowered mm 1995 18 Mast Height Fork Raised mm 4030 19 Overhead Guard Height (EXB, EXK) mm 2070 Overhead Guard Height (EXC, EXE, EXN) mm 2130 20 Operator’s Seat Height mm 1045 21 Turning Radius (Outside) mm 1980 2010 22 Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm 425 455 23 Basic Right Angle Stacking Aisle Width mm 3685 3715 (Add load length and clearance) 24 Speeds Travel Max. Full load km/h 18.5 / 18.5 19.0 / 19.0 18.5 / 18.5 19.0 / 19.0 (Fwd/Rvs.) No load km/h 19.0 / 19.0 19.5 / 19.5 19.0 / 19.0 19.5 / 19.5 25 Lifting Full load mm/s 600 No load mm/s 680 26 Lowering Full load mm/s 450 No load mm/s 550 28 Max. Drawbar Pull Full load kN 12.7 15.7 12.7 15.7 No load kN 6.9 30 Max. Gradeability* Full load % 25 33 22 31 No load % 18 32 Total Weight kg 2510 2670 33 Weight Distribution Full load Front kg 3510 3880 Rear kg 500 540 34 No load Front kg 1070 1030 Rear kg 1440 1640 35 Tires Number Front / Rear 2 / 2 36 Size Front 6.50 - 10 10PR 37 Rear 5.00 - 8 - 8PR 38 Wheelbase mm 1425 39 Tread Front mm 890 920 Rear mm 920 Backrest Height mm 1045 Overhead Guard Clearance mm 1005 Counterweight Height mm 1110 Drawbar Pin Center Height mm 495 Step Height / Floor Height mm 420 / 650 40 Underclearance Min. with load mm 100 41 Center of Wheelbase mm 110 42 Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / 28 49 Internal Combustion Engine Make/Model NISSAN K21 Rated Horsepower / r.p.m. kW 34.6 / 2250 Rated Torque / r.p.m. N•m 153.5 / 1600 51 Number of Cylinder 4 52 Piston Displacement cc 2065 Alternator output kW/Amp 0.60 / 50 Fuel Tank Capacity Type lit 50 55 Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1 57 Operating Pressure For Attachments MPa (psi) 17.7 Characteristics Dimensions Performance Weight Chassis Engine and Transmission
  • 25. STANDARD SPECIFICATIONS Gasoline – 2 - 2.5 - 3 ton *Computed values Characteristics 1 Manufacturer TCM 2 Model FG20C3 FG20T3 FG25C3 FG25T3 FG30C3 FG30T3 3 Load Capacity kg 2000 2500 3000 Load Center mm 500 500 500 5 Power type Gasoline Gasoline Gasoline 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 Dimensions 9 Maximum Fork Height mm 3000 3000 3000 10 Free Lift mm 105 110 165 13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45 Fork Spread (Outside) Max. / Min. mm 1020 / 244 1020 / 244 1090 / 250 14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12 15 Lenght to Fork Face mm 2485 2555 2705 16 Overall Width mm 1150 1150 1225 17 Mast Height Fork Lowered mm 2030 2030 2075 18 Mast Height Fork Raised mm 4030 4030 4260 19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090 Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150 20 Operator’s Seat Height mm 1045 1045 1070 21 Turning Radius (Outside) mm 2170 2240 2400 22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480 Rear Overhang mm 435 505 525 23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185 Performance 24 Speeds Travel Max. (Fwd. / Rvs.) Full Load km/h 18,5 18,5 19 No Load km/h 19 19 19,5 25 Lifting Full Load mm/s 540 540 440 No Load mm/s 580 580 490 26 Lowering Full Load mm/s 450 450 450 No Load mm/s 550 550 450 28 Max. Drawbar Pull Full Load kN 12,3 16,7 12,3 16,7 10,8 14,2 No Load kN 8,3 8,3 9,8 29 Max. Gradeability* Full Load % 20 28 19 24 14 18 No Load % 20 20 20 Weight 32 Total Weight kg 3210 3570 4205 33 Weight Distribution Full Load Front kg 4610 5350 6350 Rear kg 600 720 900 34 No Load Front kg 1430 1370 1620 Rear kg 1780 2200 2630 Chassis & Wheels 35 Tires Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Size Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l) 37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l) 38 Wheelbase mm 1600 1600 1700 39 Tread Front mm 970 970 1000 Rear mm 970 970 970 Backrest Height mm 1040 1040 1300 Overhead Guard Clearance mm 1005 1005 1005 Counterweight Height mm 1110 1110 1130 Drawbar Pin Center Height mm 530 530 560 Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680 40 Underclearance Minimum Full Load mm 110 110 140 41 Center of wheelbase mm 120 120 145 42 Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Engine & Transmission 45 Battery Voltage / Capacity (5HR) V / AH 12 / 30 12 / 30 12 / 30 49 Internal Combustion Engine Make - Model NISSAN / K21 NISSAN / K21 NISSAN / K21 50 Rated Horsepower / r.p.m. kW 34,6 / 2250 34,6 / 2250 34,6 / 2250 51 Rated Torque / r.p.m. N-m 153,5 / 1600 153,5 / 1600 153,5 / 1600 52 Number of Cylinder 4 4 4 Piston Displacement cc 2065 2065 2065 Alternator output kW/amp 0,60 / 50 0,60 / 50 0,60 / 50 Fuel Tank Capacity Type liter 70 70 70 55 Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1 57 Operating Pressure For attachment MPa 17,7 17,7 17,7
  • 26. *Computed values Characteristics 1 Manufacturer TCM 2 Model FHG20C3 FHG20T3 FHG25C3 FHG25T3 FHG30C3 FHG30T3 3 Load Capacity kg 2000 2500 3000 Load Center mm 500 500 500 5 Power type Gasoline Gasoline Gasoline 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 Dimensions 9 Maximum Fork Height mm 3000 3000 3000 10 Free Lift mm 105 110 165 13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45 Fork Spread (Outside) Max. / Min. mm 1020 / 244 1020 / 244 1090 / 250 14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12 15 Lenght to Fork Face mm 2485 2555 2705 16 Overall Width mm 1150 1150 1225 17 Mast Height Fork Lowered mm 2030 2030 2075 18 Mast Height Fork Raised mm 4030 4030 4260 19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090 Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150 20 Operator’s Seat Height mm 1045 1045 1070 21 Turning Radius (Outside) mm 2170 2240 2400 22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480 Rear Overhang mm 435 505 525 23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185 Performance 24 Speeds Travel Max. (Fwd. / Rvs.) Full Load km/h 18,5 18,5 19 No Load km/h 19 19 19,5 25 Lifting Full Load mm/s 600 600 500 No Load mm/s 620 620 520 26 Lowering Full Load mm/s 450 450 450 No Load mm/s 550 550 450 28 Max. Drawbar Pull Full Load kN 14,2 22,1 14,2 22,1 12,7 19,6 No Load kN 8,3 8,3 9,8 29 Max. Gradeability* Full Load % 24 36 21 33 18 24 No Load % 20 18 20 Weight 32 Total Weight kg 3220 3580 4260 33 Weight Distribution Full Load Front kg 4620 5350 6350 Rear kg 600 730 910 34 No Load Front kg 1440 1370 1620 Rear kg 1780 2210 2640 Chassis & Wheels 35 Tires Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Size Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l) 37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l) 38 Wheelbase mm 1600 1600 1700 39 Tread Front mm 970 970 1000 Rear mm 970 970 970 Backrest Height mm 1040 1040 1300 Overhead Guard Clearance mm 1005 1005 1005 Counterweight Height mm 1110 1110 1130 Drawbar Pin Center Height mm 530 530 560 Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680 40 Underclearance Minimum Full Load mm 110 110 140 41 Center of wheelbase mm 120 120 145 42 Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Engine & Transmission 45 Battery Voltage / Capacity (5HR) V / AH 12 / 30 12 / 30 12 / 30 49 Internal Combustion Engine Make - Model NISSAN / K25 NISSAN / K25 NISSAN / K25 50 Rated Horsepower / r.p.m. kW 39,5 / 2100 39,5 / 2100 39,5 / 2100 51 Rated Torque / r.p.m. N-m 188,1 / 1600 188,1 / 1600 188,1 / 1600 52 Number of Cylinder 4 4 4 Piston Displacement cc 2488 2488 2488 Alternator output kW/amp 0,60 / 50 0,60 / 50 0,60 / 50 Fuel Tank Capacity Type liter 70 70 70 55 Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1 57 Operating Pressure For attachment MPa 17,7 17,7 17,7
  • 27. STANDARD SPECIFICATIONS Diesel -- 1.5 - 1.8 ton *Computed values I Manufacturer TCM 2 Model FD15C13 FD15T13 FD18C13 FD18T13 3 Load Capacity kg 1500 1750 4 Load Center mm 500 5 Power Type Diesel 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum Fork Height mm 3000 10 Free Lift mm 155 13 Fork Size L x W x T mm 920 x 100 x 35 Fork Spread (Outside) Max. / Min. mm 920 / 200 14 Tilt Angle Fwd / Bwd deg 6 - 12 15 Length to Fork Face mm 2245 2275 16 Overall Width mm 1070 1100 17 Mast Height Fork Lowered mm 1995 18 Mast Height Fork Raised mm 4030 19 Overhead Guard Height (EXB, EXK) mm 2070 Overhead Guard Height (EXC, EXE, EXN) mm 2130 20 Operator’s Seat Height mm 1015 21 Turning Radius (Outside) mm 1980 2010 22 Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm 425 455 23 Basic Right Angle Stacking Aisle Width mm 3685 3715 (Add load length and clearance) 24 Speeds Travel Max. Full load km/h 13.5 / 13.5 (Fwd/Rvs.) No load km/h 14.0 / 14.0 25 Lifting Full load mm/s 530 No load mm/s 600 26 Lowering Full load mm/s 450 No load mm/s 550 28 Max. Drawbar Pull Full load kN 8.8 13.7 8.8 13.7 No load kN 6.9 30 Max. Gradeability* Full load % 22 24 20 21 No load % 19 16 32 Total Weight kg 2540 2700 33 Weight Distribution Full load Front kg 3530 3900 Rear kg 510 550 34 No load Front kg 1090 1050 Rear kg 1450 1650 35 Tires Number Front / Rear 2 / 2 36 Size Front 6.50 - 10 10PR 37 Rear 5.00 - 8 - 8PR 38 Wheelbase mm 1425 39 Tread Front mm 890 920 Rear mm 920 Backrest Height mm 1045 Overhead Guard Clearance mm 1035 Counterweight Height mm 1110 Drawbar Pin Center Height mm 495 Step Height / Floor Height mm 420 / 650 40 Underclearance Min. with load mm 100 41 Center of Wheelbase mm 110 42 Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / 52 49 Internal Combustion Engine Make/Model KUBOTA D1503 Rated Horsepower / r.p.m. kW 21.3 / 2500 Rated Torque / r.p.m. N•m 98 / 1600 51 Number of Cylinder 3 52 Piston Displacement cc 1499 Alternator output kW/Amp 0.54 / 45 Fuel Tank Capacity Type lit 50 55 Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1 57 Operating Pressure For Attachments MPa (psi) 17.7 Characteristics Dimensions Performance Weight Chassis Engine and Transmission
  • 28. *Computed values I Manufacturer TCM 2 Model FHG15C3 FHG15T3 FHG18C3 FHG18T3 3 Load Capacity kg 1500 1750 4 Load Center mm 500 5 Power Type Diesel 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum Fork Height mm 3000 10 Free Lift mm 155 13 Fork Size L x W x T mm 920 x 100 x 35 Fork Spread (Outside) Max. / Min. mm 920 / 200 14 Tilt Angle Fwd / Bwd deg 6 - 12 15 Length to Fork Face mm 2245 2275 16 Overall Width mm 1070 1100 17 Mast Height Fork Lowered mm 1995 18 Mast Height Fork Raised mm 4030 19 Overhead Guard Height (EXB, EXK) mm 2070 Overhead Guard Height (EXC, EXE, EXN) mm 2130 20 Operator’s Seat Height mm 1045 21 Turning Radius (Outside) mm 1980 2010 22 Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm 425 455 23 Basic Right Angle Stacking Aisle Width mm 3685 3715 (Add load length and clearance) 24 Speeds Travel Max. Full load km/h 18.5 / 18.5 19.0 / 19.0 18.5 / 18.5 19.0 / 19.0 (Fwd/Rvs.) No load km/h 19.0 / 19.0 19.5 / 19.5 19.0 / 19.0 19.5 / 19.5 25 Lifting Full load mm/s 620 No load mm/s 680 26 Lowering Full load mm/s 450 No load mm/s 550 28 Max. Drawbar Pull Full load kN 14.7 18.6 14.7 18.6 No load kN 6.9 30 Max. Gradeability* Full load % 25 33 22 31 No load % 18 17 32 Total Weight kg 2620 2780 33 Weight Distribution Full load Front kg 3550 3910 Rear kg 570 620 34 No load Front kg 1110 1060 Rear kg 1510 1720 35 Tires Number Front / Rear 2 / 2 36 Size Front 6.50 - 10 10PR 37 Rear 5.00 - 8 - 8PR 38 Wheelbase mm 1425 39 Tread Front mm 890 920 Rear mm 920 Backrest Height mm 1045 Overhead Guard Clearance mm 1005 Counterweight Height mm 1110 Drawbar Pin Center Height mm 495 Step Height / Floor Height mm 420 / 650 40 Underclearance Min. with load mm 100 41 Center of Wheelbase mm 110 42 Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / 64 49 Internal Combustion Engine Make/Model NISSAN DIESEL TD27 - II Rated Horsepower / r.p.m. kW 42.0 / 2400 Rated Torque / r.p.m. N•m 170 / 2300 51 Number of Cylinder 4 52 Piston Displacement cc 2663 Alternator output kW/Amp 0.72 / 60 Fuel Tank Capacity Type lit 50 55 Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs 2 - 2 1 - 1 2 - 2 1 - 1 57 Operating Pressure For Attachments MPa (psi) 17.7 Characteristics Dimensions Performance Weight Chassis Engine and Transmission
  • 29. STANDARD SPECIFICATIONS Diesel -- 2 - 2,5 - 3 - 3,5 ton Characteristics 1 Manufacturer TCM 2 Model FD20C3 FD20T3 FD25C3 FD25T3 3 Load Capacity kg 2000 2500 Load Center mm 500 500 5 Power type Diesel Diesel 6 Operator Position Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 Dimensions 9 Maximum Fork Height mm 3000 3000 10 Free Lift mm 105 110 13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 Fork Spread (Outside) Max. / Min. mm 1020 / 245 1020 / 245 14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 15 Lenght to Fork Face mm 2485 2555 16 Overall Width mm 1150 1150 17 Mast Height Fork Lowered mm 2030 2030 18 Mast Height Fork Raised mm 4030 4030 19 Overhead Guard Height (EXB, EXK) mm 2070 2070 Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 20 Operator’s Seat Height mm 1045 1045 21 Turning Radius (Outside) mm 2170 2240 22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 Rear Overhang mm 435 505 23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 Performance 24 Speeds Travel Max. (Fwd. / Rvs.) Full Load km/h 18,5 18 18,5 18 No Load km/h 19 18,5 19 18,5 25 Lifting Full Load mm/s 630 630 No Load mm/s 670 670 26 Lowering Full Load mm/s 450 450 No Load mm/s 550 550 28 Max. Drawbar Pull Full Load kN 13,7 19,1 13,7 19,1 No Load kN 8,3 8,3 29 Max. Gradeability* Full Load % 23 34 20 28 No Load % 20 20 Weight 32 Total Weight kg 3340 3700 33 Weight Distribution Full Load Front kg 4670 5400 Rear kg 670 800 34 No Load Front kg 1490 1420 Rear kg 1850 2280 Chassis & Wheels 35 Tires Number Front / Rear 2 / 2 2 / 2 36 Size Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 38 Wheelbase mm 1600 1600 39 Tread Front mm 970 970 Rear mm 970 970 Backrest Height mm 1040 1040 Overhead Guard Clearance mm 1005 1005 Counterweight Height mm 1110 1110 Drawbar Pin Center Height mm 530 530 Step Height / Floor Height mm 435 / 650 435 / 650 40 Underclearance Minimum Full Load mm 110 110 41 Center of wheelbase mm 120 120 42 Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Engine & Transmission 45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64 49 Internal Combustion Engine Make - Model NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II 50 Rated Horsepower / r.p.m. kW 42,0 / 2400 42,0 / 2400 51 Rated Torque / r.p.m. N-m 170 / 2300 170 / 2300 52 Number of Cylinder 4 4 Piston Displacement cc 2663 2663 Alternator output kW/amp 0,72 / 60 0,72 / 60 Fuel Tank Capacity Type liter 70 70 55 Transmission Type Manual Power-shift Manual Power-shift Stage Fwd - Rvs 2-2 1-1 2-2 1-1 57 Operating Pressure For attachment MPa 17,7 17,7
  • 30. Characteristics 1 Manufacturer TCM 2 Model FD30C3 FD30T3 FD35T3S 3 Load Capacity kg 3000 3500 Load Center mm 500 500 5 Power type Diesel Diesel 6 Operator Position Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 Dimensions 9 Maximum Fork Height mm 3000 3000 10 Free Lift mm 165 170 13 Fork Size L x W x T mm 1070 x 122 x 45 1070 x 150 x 50 Fork Spread (Outside) Max. / Min. mm 1090 / 250 1090 / 300 14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 15 Lenght to Fork Face mm 2705 2800 16 Overall Width mm 1225 1290 17 Mast Height Fork Lowered mm 2075 2135 18 Mast Height Fork Raised mm 4260 4255 19 Overhead Guard Height (EXB, EXK) mm 2090 2140 Overhead Guard Height (EXC, EXE, EXN) mm 2150 2200 20 Operator’s Seat Height mm 1070 1120 21 Turning Radius (Outside) mm 2400 2470 22 Load Distance (Centerline of Axle to Front Face of Forks) mm 480 495 Rear Overhang mm 525 605 23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 4185 4145 Performance 24 Speeds Travel Max. (Fwd. / Rvs.) Full Load km/h 19 19 No Load km/h 19,5 19,5 25 Lifting Full Load mm/s 520 460 No Load mm/s 590 490 26 Lowering Full Load mm/s 450 420 No Load mm/s 450 450 28 Max. Drawbar Pull Full Load kN 12,7 17,2 18,1 No Load kN 9,8 10,8 29 Max. Gradeability* Full Load % 15 21 20 No Load % 20 17 Weight 32 Total Weight kg 4390 4940 33 Weight Distribution Full Load Front kg 6410 7290 Rear kg 980 800 34 No Load Front kg 1680 1420 Rear kg 2710 2280 Chassis & Wheels 35 Tires Number Front / Rear 2 / 2 2 / 2 36 Size Front 28 x 9 - 15 - 12PR (l) 7,00 - 12 - 12PR (l) 37 Rear 6,50 - 10 - 10PR (l) 6,00 - 9 - 10PR (l) 38 Wheelbase mm 1700 1600 39 Tread Front mm 1000 970 Rear mm 970 970 Backrest Height mm 1300 1040 Overhead Guard Clearance mm 1005 1005 Counterweight Height mm 1130 1110 Drawbar Pin Center Height mm 560 530 Step Height / Floor Height mm 460 / 680 435 / 650 40 Underclearance Minimum Full Load mm 140 110 41 Center of wheelbase mm 145 120 42 Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Engine & Transmission 45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64 49 Internal Combustion Engine Make - Model NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II 50 Rated Horsepower / r.p.m. kW 42,0 / 2400 42,0 / 2400 51 Rated Torque / r.p.m. N-m 170 / 2300 170 / 2300 52 Number of Cylinder 4 4 Piston Displacement cc 2663 2663 Alternator output kW/amp 0,72 / 60 0,72 / 60 Fuel Tank Capacity Type liter 70 70 55 Transmission Type Manual Power-shift Manual Stage Fwd - Rvs 2-2 1-1 2-2 57 Operating Pressure For attachment MPa 17,7 17,7
  • 31. Characteristics 1 Manufacturer TCM 2 Model FHD20C3 FHD20T3 FHD25C3 FHD25T3 FHD30C3 FHD30T3 3 Load Capacity kg 2000 2500 3000 Load Center mm 500 500 500 5 Power type Diesel Diesel Diesel 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 Dimensions 9 Maximum Fork Height mm 3000 3000 3000 10 Free Lift mm 105 110 165 13 Fork Size L x W x T mm 1070 x 122 x 36 1070 x 122 x 40 1070 x 125 x 45 Fork Spread (Outside) Max. / Min. mm 1020 / 245 1020 / 245 1090 / 250 14 Tilt Angle Fwd / Bwd deg 6 / 12 6 / 12 6 / 12 15 Lenght to Fork Face mm 2485 2555 2705 16 Overall Width mm 1150 1150 1225 17 Mast Height Fork Lowered mm 2030 2030 2075 18 Mast Height Fork Raised mm 4030 4030 4260 19 Overhead Guard Height (EXB, EXK) mm 2070 2070 2090 Overhead Guard Height (EXC, EXE, EXN) mm 2130 2130 2150 20 Operator’s Seat Height mm 1045 1045 1070 21 Turning Radius (Outside) mm 2170 2240 2400 22 Load Distance (Centerline of Axle to Front Face of Forks) mm 450 450 480 Rear Overhang mm 435 505 525 23 Basic Right Angle Stacking Aisle Width (Add load length and clearance)) mm 3925 3995 4185 Performance 24 Speeds Travel Max. (Fwd. / Rvs.) Full Load km/h 18 18 19 No Load km/h 18,5 18,5 19,5 25 Lifting Full Load mm/s 620 620 520 No Load mm/s 640 640 540 26 Lowering Full Load mm/s 450 450 450 No Load mm/s 550 550 450 28 Max. Drawbar Pull Full Load kN 15,7 26,5 15,7 26,5 14,8 13,5 No Load kN 8,3 8,3 9,8 29 Max. Gradeability* Full Load % 28 38 24 32 16 27 No Load % 20 18 20 Weight 32 Total Weight kg 3340 3700 4390 33 Weight Distribution Full Load Front kg 4680 5400 6410 Rear kg 660 800 980 34 No Load Front kg 1500 1420 1690 Rear kg 1840 2280 2700 Chassis & Wheels 35 Tires Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Size Front 7,00 - 12 - 12PR (l) 7,00 - 12 - 12PR (l) 28 x 9 - 15 - 12PR (l) 37 Rear 6,00 - 9 - 10PR (l) 6,00 - 9 - 10PR (l) 6,50 - 10 - 10PR (l) 38 Wheelbase mm 1600 1600 1700 39 Tread Front mm 970 970 1000 Rear mm 970 970 970 Backrest Height mm 1040 1040 1300 Overhead Guard Clearance mm 1005 1005 1005 Counterweight Height mm 1110 1110 1130 Drawbar Pin Center Height mm 530 530 560 Step Height / Floor Height mm 435 / 650 435 / 650 460 / 680 40 Underclearance Minimum Full Load mm 110 110 140 41 Center of wheelbase mm 120 120 145 42 Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Engine & Transmission 45 Battery Voltage / Capacity (5HR) V / AH 12 / 64 12 / 64 12 / 64 49 Internal Combustion Engine Make - Model KUBOTA /V3300 KUBOTA /V3300 KUBOTA /V3300 50 Rated Horsepower / r.p.m. kW 50 / 2500 50 / 2500 50 / 2500 51 Rated Torque / r.p.m. N-m 226,4 / 1800 226,4 / 1800 226,4 / 1800 52 Number of Cylinder 4 4 4 Piston Displacement cc 3318 3318 3318 Alternator output kW/amp 0,54 / 45 0,54 / 45 0,54 / 45 Fuel Tank Capacity Type liter 70 70 70 55 Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs 2-2 1-1 2-2 1-1 2-2 1-1 57 Operating Pressure For attachment MPa 17,7 17,7 17,7
  • 32. The products manufactures at TCM plant got ISO 9001 & 14001 certificates CAPACITY / LOADCENTER
  • 33. STANDARD EQUIPMENT AND ACCESSORIES EQUIPMENT • Adjustable ORS seat with belt • Asbestos-free brake shoe material • Cylinder type bonnet latch with locking function • Donaldson dry type cyclopac air-cleaner • Drawbar device • Durable overhead guard with resin screen • Engine auto glow system (Diesel) • Engine idle-up device (Gasoline) • Flow control valve • Fuel water sedimenter (Diesel) • Full hydrostatic power steering • Full transistorized ignition (Gasoline) • Hydraulic oil dipstick • ITA Class Il carriage • J-lug pneumatic industrial tires • Lift circuit cut-off valve • Load backrest • Radiator coolant reservoir • Return hydraulic filter • Suction hydraulic strainer • Tilt lock valve • Transmission oil dipstick (power shift T/M) • Transmission oil filter (power shift T/M) • Wide view two stage mast (VM300) • 2-spool control valve with pressure relief • 920mm forks CONTROLS • Electric shift control lever (power shift T/M) • Lift and tilt levers • Multi-function switch lever with self- cancelling mechanism (Lighting & turn- signal) • Neutral safety mechanism • Parking brake lever with inter-lock • Tilt adjustable steering post ACCESSORIES • Access-assisted hand grip • Back-up buzzer • Back-up lights • Deluxe floor mat • Detachle and portable glove box • Electric horn • Front combination lights (turn signal, clearance) • Head lights - trafic purpose • High-mounted rear combination lights • Operator tool kit • Pen/ Cup holder • Side view mirrors INSTRUMENTS AND SWITCH • Charge indicator • Engine oil pressure warning indicator • Fuel gauge • Fuel water sedimenter indicator (Diesel) • Glow indicator (Diesel) • Hourmeter • Ignition key engine stop (Diesel) • Neutral safety switch • Water temperature gauge OPTIONAL LOADING ATTACHMENT EQUIPMENT • Alternative fork lengths • Alternative lengths fork extension sleeve • Bale clamp • Carton clamp • Crane arm • Drum clamp • Fork clamp • Fork positioner hydraulic type (Intgral) • High, wide type load backrest • Hinged forks/bucket • Load push-pull • Load stabilizer • Ram attachment • Rotating forks (Hook-on/Integral type) • Rotating paper roll clamp (Hook-on/Integral type) • Side-shifter (Hook-on/Integral) • Sleeve-in hook • Wide type fork carriage • Wide view full free 2-stage (VFM) mast • Wide view full free 3-stage (VFHM) mast OPTIONAL EQUIPMENT AND ACCESSORIES EQUIPMENT • Air Boss tires (TRA) • Auxiliary hydraulic valve modules (max. 5spool) • Central greasing system (CL) • Color tire (white, green) • Dual element aircleaner (ADE) • Exhaust purify catalystic muffler (EPM) • Fingertip hydraulic valve control (max. 4spool) (FIT) • Fishery industry package (FC) • Front dual drive wheels (DD/SDD) • Full open cabine (AW 061) • Head light guard • Heater (HR) • Interlock system (travel & load/unload) (SIL) • Lift lock mechanism (VLL) • LPG exclusive/Dual fuel (LPG - Gasoline) package • Overhead exhaust system (TUE) • Overhead guard / High profile 2130mm (HGH060) • Overhead guard / Low profile 1995mm (HGL) • Plate fin type radiator (RAD PF) • Pre-cleaner engine air intake (CAK B) • Radiator dust screen (fine, medium mesh) (DSR) • Smoke reduction/spark arrester muffler (Diesel) (CBM) • Diesel particulate filter exhaust system • Power clutch (manual T/M) • Non-slip differential (power shift T/M) • Steering knob auto-return mechanism (SRS) • Unique cushion tires (SE) NOTES: • Meets following major standards and code: ISO 1074 Counter Balanced Lift Trucks, Stability & Safety Test (Int’l) ISO 3691 Powered industrial trucks - safety code JIS D6001 Industrial Lift Trucks (Japan) JIS D6011 Stability & Safety Test (Japan) • Overhead guard meets ISO 6055, JIS 6021 • ln conformity with provision of the Machinery Directive 98/37/EC, as amended, and with National implemen- ting legislation: (European and Scandinavian export trucks) • Specifications are subject to change without notice and its may vary depending on markets. Please consult your TCM representative for details. ACCESSORIES • Custom paint-work • Fire extinguisher (FE) • Rear working light • Rotating warning light (RLY/RLR) • Tilt cylinder boots (TLB) INSTRUMENTS AND SWITCH • Ammeter (AM) • OK, monitor (fuel level, battery electro- lyte level,coolant level, parking brake, air-cleaner, seat-belt) • Speedometer (SM) • Torque converter oil pressure gauge (TPM) • Torque converter oil temperature gauge (power shift T/M) Other on request ACCESSORIES -- 1.5 - 1.8 ton
  • 34. STANDARD EQUIPMENT AND ACCESSORIES EQUIPMENT • Asbestos-free brake shoe material • Donaldson dry type cyclopac air-cleaner • Radiator coolant reservoir • Cylinder type bonnet latch with locking function • Adjustable ORS seat with belt • Drawbar device • Engine idle-up device (Gasoline) • Engine auto glow system (Diesel) • Fuel water sedimenter (Diesel) • Full hydrostatic power steering • Full transistorized ignition (Gasoline) • Durable overhead guard with resin screen • Wide view two stage mast (VM300) • Hydraulic oil dipstick • ITA Class II or class Ill carriage • J-lug pneumatic industrial tires • Lift circuit cut-off valve • Load backrest • Flow control valve • Return hydraulic filter • Suction hydraulic strainer • Tilt lock valve • Transmission oil dipstick (power shift T/M) • Transmission oil filter (power shift T/M) • lO7Omm forks • 2-spool control valve with pressure relief CONTROLS • Electric shift control lever (power shift T/M) • Lift and tilt levers • Multi-function switch lever with self- cancelling mechanism (Lighting & turn- signal) • Parking brake lever with inter-lock • Tilt adjustable steering post • Neutral safety mechanism ACCESSORIES • Back-up buzzer • Back-up lights • Deluxe floor mat • Pen/ Cup holder • Electric horn • Access-assisted hand grip • Front combination lights (turn signal, clearance) • Detachle and portable glove box • Head lights - trafic purpose • High-mounted rear combination lights • Operator tool kit • Side view mirrors INSTRUMENTS AND SWITCH • Charge indicator • Engine oil pressure warning indicator • Fuel gauge • Glow indicator (Diesel) • Hourmeter • Ignition key engine stop (Diesel) • Neutral safety switch • Fuel water sedimenter indicator (Diesel) • Water temperature gauge OPTIONAL LOADING ATTACHMENT EQUIPMENT • Bale clamp • Carton clamp • Crane arm • Drum clamp • Fork clamp • Alternative lengths fork extension sleeve • Fork positioner hydraulic type (Hook-on/Intgral) • Fork positioner manual type • High, wide type load backrest • Hinged forks/bucket • Load push-pull • Load stabilizer • Alternative fork lengths • Ram attachment • Rotating forks (Hook-on/Integral type) • Rotating paper roll clamp (Hook-on/Integral type) • Side-shifter(Hook-on/Integral) • Sleeve-in hook • Wide type fork carriage • Wide view full free 2-stage (VFM) mast • Wide view full free 3-stage (VFHM) mast • Wide view full free 2-stage 4cyl (VFW) mast • Wide view full free 3-stage 4cyl (VFHW) mast • Rotating bale clamp OPTIONAL EQUIPMENT AND ACCESSORIES EQUIPMENT • Auxiliary hydraulic valve modules (max. 5spool) • Central greasing system (CL) • Color tire (white, green) • Exhaust purify catalystic muffler (EPM) • Front dual drive wheels (DD/SDD) • Power clutch (manual T/M) • Oil clutch (manual T/M) • Heater (HR) • Heater & defroster (DEF) • LPG exclusive/Dual fuel (LPG - Gasoline) package • Overhead exhaust system (TUE) • Smoke reduction/spark arrester muffler • Unique cushion tires (SE) • Windshield wiper • Steel cabin - enclosed type (SCB 001) • Air-conditioner CFC free (AC) • Plate fin type radiator (RAD PF) • Full open cabine (AW 061) • Radiator dust screen (fine, medium mesh) • Pre-cleaner engine air intake (CAK B) • Dual element aircleaner (ADE) • Overhead guard! High profile 2130mm • Diesel particulate filter exhaust system • Overhead guard! Low profile 1995mm • Non-slip differential (power shift T/M) • Fishery industry package (FC) • Fingertip hydraulic valve control (FIT) • Cabin - panel type (SCBPA) • Steering knob auto-return mechanism (SRS) • Lift lock mechanism (VLL) • Interlock system (travel & load/unload) • Load sensing valve (VLS) • High capacity radiator - High power model (RAD PF2) NOTES: • Meets following major standards and code: ISO 1074 Counter Balanced Lift Trucks, Stability & Safety Test (Int’l) ISO 3691 Powered industrial trucks - safety code JIS D6001 Industrial Lift Trucks (Japan) JIS D6011 Stability & Safety Test (Japan) • Overhead guard meets ISO 6055, JIS 6021 • ln conformity with provision of the Machinery Directive 98/37/EC, as amended, and with National implemen- ting legislation: (European and Scandinavian export trucks) • Specifications are subject to change without notice and its may vary depending on markets. Please consult your TCM representative for details. ACCESSORIES • Custom paint-work • Fire extinguisher (FE) • Rear working light • Rotating warning light (RLY/RLR) • Tilt cylinder boots (TLB) INSTRUMENTS AND SWITCH • Ammeter (AM) • OK, monitor (fuel level, battery electro- lyte level,coolant level, parking brake, air-cleaner, seat-belt) • Speedometer (SM) • Torque converter oil pressure gauge (TPM) • Torque converter oil temperature gauge (power shift T/M) Other on request Features and equipment may vary depending on market ACCESSORIES 2 - 2.5 - 3 - 3.5 ton