SlideShare a Scribd company logo
1 of 30
BY
PRASAN KINAGI
M.Tech in Production Management
USN-2BV12MPM06
BVB COLLEGE OF ENGINEERING & TECHNOLOGY 1
 Company profile
 Background
 Casting process
 Problem statement, objective, scope
 Literature review
 Methodology
 FMEA
 Data collection
 Experiment details
 Confirmatory test results
 Conclusion
 References
BVB COLLEGE OF ENGINEERING & TECHNOLOGY 2
Harihar, Karnataka
Foundry
Family-owned
duct 30
Eicher 298, APEGL 435,400
Laxmi foundry, Velkast are other owned industry
Place
Sector
Ownership
Employees
Products
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
3
 Sand Casting is simply melting the metal and pouring molten metal
into mold cavity, allowing the metal to solidify and then breaking up
the mold to remove casting.
 It is also called as sand molded casting, is a metal casting process
characterized by using sand as the mold material.
 Sand casting is relatively cheap
 All foundry processes generate a certain level of rejection is closely
related to the type of casting, the processes used and the equipment's
available
 The rejected casting can only be re-melted and the value addition
made during process such as melting
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
4
 Most of the foundries have no precise knowledge of the main causes
of rejection because they fail to maintain a satisfactory quality
control system.
 Producing defect free casting is impossible, hence it deals with
systematic to understanding and development of quality in cast iron
foundry.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
5
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
6
Problem Statement
 Minimizing casting defects
Project Objective
 Identification of defects in engine casing(Eicher-298) and causes
 The main objective of this project is to optimize sand casting
process parameter using DOE method through Taguchi method.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY 7
Scope
 The project is limited to minimization of casting defects at pradeep
enterprises, harihara
Project significance
Producing defect free casting is impossible, so attempt has been made
to minimize the casting defects. In today’s competitive and challenging
environment, organizations strive to have competitive advantage so
 Improve production and quality
 Increase customer satisfaction
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
8
 It is important for manufacturing industry to achieve quality level[1]
 Quality can be achieved by reducing defects and by controlling process
parameters relating to the potential cause of defects
 Studying the cause of defect is best solution to get rid of defects[4]
 No of defects increases due to pouring temperature, improper pouring and
lack of trained workers
 Defects motivated researcher to identify defects and to know potential
causes of failure
 From literature review it concluded that application of Pareto analysis;
failure mode effect analysis and design of experiment can significantly
minimize the defects of manual casting operation.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
9
Rejection Analysis
Identification of causes
by FMEA
Defects due to sand,
pouring, mold
Pareto analysis
Identification of
parameter, levels
affecting defects
Selection of optimal level
Review checking and
improvement
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
10
 FMEA analysis are used to determine which failures are likely to
appear and what corrective actions are necessary for failure
prevention.
 FMEA is the set of guidelines for identifying and prioritizing the
potential failure or defects
 We are going to prioritize the defects by finding the RPN no.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
11
For cold shut
Poor pouring practice
Low pouring temperature
Low metal fluidity
For blow hole
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
12
Defects
Potential failure
mode
Potential cause for failure
S O D
RPN
Blowhole
Internal voids
with depression
Moisture left in mold and
core
7 6 6 252
Cold shut
Small shot like
sphere
Due to rapid solidification
before filling up of mold
8 8 5 320
shrinkage
Reduction in
volume
Due to lack of riser system 4 4 4 64
Sand inclusion
Inclusion of sand
on the edges of
casted surface
Improper ramming of sand 7 5 5 175
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
13
Month Production Total
rejection
Cold
metal
Blow
hole
Sand
inclusion
Others
February 4210 508 202 138 96 72
March 3975 318 119 92 63 44
April 3508 186 97 30 42 17
Total 11693 1012 418 260 201 133
Rejection data sheet
Data shows the total production per month and
the data is of three months. Rejection of total
Eicher-298
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
14
With the help of Pareto chart, factors that influenced the rejection
most are identified. The above graph shows the percentage rejection
of defects and also cumulative percentage of defects. From the above
Pareto graph 3.6% cold metal defects, 2.2% blowhole defects occur
and it came it out as major defects and sand inclusion also effects.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
15
 Experiments were carried out in foundry industry producing CI
components. The analysis of casting defects involves selecting
parameters and their levels. Performing experiments as per DOE
(Taguchi method) and collect data.
 As per rejection analysis it was found that the component EICHER-
298 rejection was maximum due to sand inclusion, blowhole and
cold shut. So this component is selected for analysis by DOE
method.
 Proper selection of the casting parameters can results in minimum
casting defects. Optimization of these casting parameters based on 3
levels and 4 factors is adopted in this paper to minimize the casting
defects.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY 16
Sl.
no
code Factors(unit)
Levels
1 2 3
1 A
Pouring
temperature
1380 1410 1440
2 B Inoculant 0.1 0.2 0.3
3 C
Moisture
content
3 3.3 3.6
4 D
Sand binder
ratio
60:0.9 60:1 60:1.2
Factors and their level
BVB COLLEGE OF ENGINEERING & TECHNOLOGY 17
Trial No.
Level of factor
A B C D
1. 1380 0.1 3 60:0.9
2. 1380 0.2 3.3 60:1
3. 1380 0.3 3.6 60:1.2
4. 1410 0.1 3.3 60:1.2
5. 1410 0.2 3.6 60:0.9
6. 1410 0.3 3 60:1
7. 1440 0.1 3.6 60:1
8. 1440 0.2 3 60:1.2
9. 1440 0.3 3.3 60:0.9
Experiment layout plan of L9 Taguchi orthogonal array
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
18
Trial
No.
Level of factor
Number of defects in %
(for each 10 products)
A B C D
1. 1380 0.1 3 60:0.9 40
2. 1380 0.2 3.3 60:1 30
3. 1380 0.3 3.6 60:1.2 40
4. 1410 0.1 3.3 60:1.2 70
5. 1410 0.2 3.6 60:0.9 60
6. 1410 0.3 3 60:1 50
7. 1440 0.1 3.6 60:1 40
8. 1440 0.2 3 60:1.2 40
9. 1440 0.3 3.3 60:0.9 30
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
S/N ratio
-32.04
-29.54
-32.04
-36.90
-35.56
-33.97
-32.04
-32.04
-29.54
19
Factors
Levels (dB)
Optimum
value
Optimum
level
L1 L2 L3
A -31.21 -35.48 -31.21 -31.21 1&3
B -33.66 -32.38 -31.85 -31.85 3
C -32.69 -32 -33.22 -32 2
D -32.38 -31.85 -33.66 -31.85 2
Optimum mean =-29.02
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
20
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
144014101380
-31
-32
-33
-34
-35
0.30.20.1
3.63.33.0
-31
-32
-33
-34
-35
60:1.260:160:0.9
A
MeanofSNratios
B
C D
Main Effects Plot for SN ratios
Data Means
Signal-to-noise: Smaller is better
21
Factors Degrees of Freedom
Sum of
Squares
Mean
Squares
Contribution
%
A 2 36.46 18.23 74.27
B 2 5.19 2.59 10.57
C 2 2.24 1.12 4.56
D 2 5.19 2.59 10.57
Error 0 0 - -
Total 8 49.09 6.45 99.97
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
Factor Pooled: B&C(Because of less contribution on total variation of S/N ratio)
22
Sl.no Pouring
temperature
inoculant Moisture
content
Sand-
Binder
Ratio
Defects
In %
S/N
Ratio
1. 1380 0.3 3.3 60:0.1 20 -26.02
2. 1440 0.3 3.3 60:0.1 20
-26.02
Average signal to noise ratio= -26.02
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
23
Levels (A, B, C, D) 1-3-2-2
Signal to noise ratio observed (ηobs), dB -26.02
Predicted Signal to noise ratio (ηpred), dB -29.65
Prediction error, dB 3.63
Confidence limit ( 2σ), dB ±2.39
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
24
 Pareto principle is used to identify and evaluate different defects and
causes for these defects responsible for rejection of components at different
stages of manual metal casting operations. The correct identification of the
casting defect at initial stage is very useful for taking remedial actions.
 The optimized levels of selected process parameter so obtained by
Taguchi-method are pouring temperature(A): 1380&1440,
inoculant(B):0.3, moisture content(C): 3.3, sand binder ratio(D):60:1.
 The percentage contribution of error is within 15%, which indicates that,
no important factors are left out from analysis.
 The result of verification experiments has shown the quality of
additive model is adequate and percentage of improvement is
satisfactory.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
25
 Design of experiments method such as Taguchi method can be
efficiently applied for deciding the optimum settings of process
parameters to have minimum rejection due to defects for a new
casting as well as for analysis of defects in existing casting.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
26
 The future scope of this experiment can further guide in selecting
the various combinations for the process with mode trails can help
in minimizing the defects of castings.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
27
1]Shepherd, N., Economics of quality and activity based management:
The bridge to continuous improvement,The Management Accounting
Magazine, Vol. 69, No. 2, pp. 29-32, 1995.
2] Schonberger, R.J., E.M. Jr, Operations Management, Fourth edition,
IL and Boston, 1991.
3] Schneider man, A.M., Optimum quality costs and zero defects: are
they contradictory concepts Quality Progress, Vol. 19, No. 11, pp. 29,
1986.
4] Achamyeleh A. Kassie, Samuel B. Assfaw,C Minimization of
casting, School of Mechanical and Industrial Engineering Bahirdar
University, Bahirdar, Ethiopia
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
28
5]S. Kuyucak, “Sponsored Research: Clean Steel Casting production – Evaluation of
Laboratory Castings”, American Foundry Society, 2007
6]Piyush Kumar Pareek,Fmea Implementation In A Foundry In Bangalore To Improve
Quality And Reliability
7] H.C. Pandit, AmitSata, V. V. Mane, Uday A. Dabade,2012, “A Novel Web-based
system for Casting Defect Analysis”, paper published in technical transactions of 60th
Indian Foundry Congress, 2-4th March2012, Bangalore,pp 535-544
8]Rahul Bhedasgaonkar, Uday A. Dabade, May 2012, “Analysis of casting Defects by
Design of Experiments Method”, Proceedings of 27th National Convention of
Production Engineers and National Seminar on Advancements in Manufacturing
VISION 2020,organised by BIT, Mesra, Ranchi, India.
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
29
BVB COLLEGE OF ENGINEERING & TECHNOLOGY
30

More Related Content

What's hot

Casting Defect Identification and its Solution by Niyama Simulation
Casting Defect Identification and its Solution by Niyama SimulationCasting Defect Identification and its Solution by Niyama Simulation
Casting Defect Identification and its Solution by Niyama SimulationIRJET Journal
 
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging Operation
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging OperationBillet Sorting Mechanism for Reducing the Rejection Rate in Forging Operation
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging Operationpaperpublications3
 
Metal Additive Manufacturing - part 3
Metal Additive Manufacturing - part 3Metal Additive Manufacturing - part 3
Metal Additive Manufacturing - part 3Marco Preziosa
 
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow Analysis
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow AnalysisIRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow Analysis
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow AnalysisIRJET Journal
 
Case Study On Metal To Plastic Substitution Opm
Case Study On Metal To Plastic Substitution OpmCase Study On Metal To Plastic Substitution Opm
Case Study On Metal To Plastic Substitution OpmNilesh Nevrekar
 
IRJET- LPG Tank Burst Pressure Determination using FEM
IRJET- LPG Tank Burst Pressure Determination using FEMIRJET- LPG Tank Burst Pressure Determination using FEM
IRJET- LPG Tank Burst Pressure Determination using FEMIRJET Journal
 
Quality assurance-for-ms-pipe itp-------------------------
Quality assurance-for-ms-pipe itp-------------------------Quality assurance-for-ms-pipe itp-------------------------
Quality assurance-for-ms-pipe itp-------------------------Pratap Biswas
 
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...IRJET Journal
 
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...IRJET Journal
 
A practical approach to eliminate defects in gravity die cast al alloy castin...
A practical approach to eliminate defects in gravity die cast al alloy castin...A practical approach to eliminate defects in gravity die cast al alloy castin...
A practical approach to eliminate defects in gravity die cast al alloy castin...eSAT Journals
 

What's hot (13)

Casting Defect Identification and its Solution by Niyama Simulation
Casting Defect Identification and its Solution by Niyama SimulationCasting Defect Identification and its Solution by Niyama Simulation
Casting Defect Identification and its Solution by Niyama Simulation
 
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging Operation
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging OperationBillet Sorting Mechanism for Reducing the Rejection Rate in Forging Operation
Billet Sorting Mechanism for Reducing the Rejection Rate in Forging Operation
 
De4301615618
De4301615618De4301615618
De4301615618
 
Metal Additive Manufacturing - part 3
Metal Additive Manufacturing - part 3Metal Additive Manufacturing - part 3
Metal Additive Manufacturing - part 3
 
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow Analysis
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow AnalysisIRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow Analysis
IRJET- Simulation and Analysis of Step Light Mid Part using Mold Flow Analysis
 
Case Study On Metal To Plastic Substitution Opm
Case Study On Metal To Plastic Substitution OpmCase Study On Metal To Plastic Substitution Opm
Case Study On Metal To Plastic Substitution Opm
 
IRJET- LPG Tank Burst Pressure Determination using FEM
IRJET- LPG Tank Burst Pressure Determination using FEMIRJET- LPG Tank Burst Pressure Determination using FEM
IRJET- LPG Tank Burst Pressure Determination using FEM
 
Quality assurance-for-ms-pipe itp-------------------------
Quality assurance-for-ms-pipe itp-------------------------Quality assurance-for-ms-pipe itp-------------------------
Quality assurance-for-ms-pipe itp-------------------------
 
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...
IRJET - Case Study of Structural Rehabilitation of Multi Storey Residential B...
 
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...
IRJET- Quality Assurance in High Density Plastic Pipes Manufacturing Process ...
 
Ijmet 10 01_018
Ijmet 10 01_018Ijmet 10 01_018
Ijmet 10 01_018
 
A practical approach to eliminate defects in gravity die cast al alloy castin...
A practical approach to eliminate defects in gravity die cast al alloy castin...A practical approach to eliminate defects in gravity die cast al alloy castin...
A practical approach to eliminate defects in gravity die cast al alloy castin...
 
Quality
QualityQuality
Quality
 

Viewers also liked

Introduction to Basic Vehicle Diagnosis
Introduction to Basic Vehicle DiagnosisIntroduction to Basic Vehicle Diagnosis
Introduction to Basic Vehicle DiagnosisJohn Dalessandro
 
Application of Taguchi Method to Reduce Rust
Application of Taguchi Method to Reduce RustApplication of Taguchi Method to Reduce Rust
Application of Taguchi Method to Reduce RustRiona Ihsan Media
 
Tech.Skills.Capacitor.07.21.11
Tech.Skills.Capacitor.07.21.11Tech.Skills.Capacitor.07.21.11
Tech.Skills.Capacitor.07.21.11Alice Herman
 
Components the diode
Components   the diodeComponents   the diode
Components the diodesld1950
 
Components transistors
Components   transistorsComponents   transistors
Components transistorssld1950
 
Silicon Control Rectifier Phase Control
Silicon Control Rectifier Phase ControlSilicon Control Rectifier Phase Control
Silicon Control Rectifier Phase ControlDerrick Tiew
 
Basic Electronics - Resistors
Basic Electronics - ResistorsBasic Electronics - Resistors
Basic Electronics - ResistorsSeggy Segaran
 
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...AVINASH JURIANI
 
Power control devices
Power control devicesPower control devices
Power control devicespopet
 
Taguchi presentation
Taguchi presentationTaguchi presentation
Taguchi presentationbwyrwa
 
Resistors
ResistorsResistors
Resistorsmuruwet
 
Transistors
TransistorsTransistors
Transistorsescalon
 
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...Neeraj Khatri
 

Viewers also liked (20)

Introduction To Capacitance
Introduction To CapacitanceIntroduction To Capacitance
Introduction To Capacitance
 
Praveen update resume
Praveen update resumePraveen update resume
Praveen update resume
 
Introduction to Basic Vehicle Diagnosis
Introduction to Basic Vehicle DiagnosisIntroduction to Basic Vehicle Diagnosis
Introduction to Basic Vehicle Diagnosis
 
Application of Taguchi Method to Reduce Rust
Application of Taguchi Method to Reduce RustApplication of Taguchi Method to Reduce Rust
Application of Taguchi Method to Reduce Rust
 
Tech.Skills.Capacitor.07.21.11
Tech.Skills.Capacitor.07.21.11Tech.Skills.Capacitor.07.21.11
Tech.Skills.Capacitor.07.21.11
 
Components the diode
Components   the diodeComponents   the diode
Components the diode
 
Components transistors
Components   transistorsComponents   transistors
Components transistors
 
Silicon Control Rectifier Phase Control
Silicon Control Rectifier Phase ControlSilicon Control Rectifier Phase Control
Silicon Control Rectifier Phase Control
 
Basic Electronics - Resistors
Basic Electronics - ResistorsBasic Electronics - Resistors
Basic Electronics - Resistors
 
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...
OPTIMIZATION OF MACHINING PARAMETERS WITH TOOL INSERT SELECTION FOR S355J2G3 ...
 
Power control devices
Power control devicesPower control devices
Power control devices
 
Silicon control rectifier
Silicon control rectifierSilicon control rectifier
Silicon control rectifier
 
Capacitors
CapacitorsCapacitors
Capacitors
 
Sensors In Automobiles
Sensors In AutomobilesSensors In Automobiles
Sensors In Automobiles
 
Taguchi presentation
Taguchi presentationTaguchi presentation
Taguchi presentation
 
Resistors
ResistorsResistors
Resistors
 
Transistors
TransistorsTransistors
Transistors
 
Taguchi method
Taguchi methodTaguchi method
Taguchi method
 
Diode
DiodeDiode
Diode
 
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...
presentation on IR based vehicle with AUTOMATIC BRAKING and DRIVER AWAKENING ...
 

Similar to Ppttttt

A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSA DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSpaperpublications3
 
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSA DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSpaperpublications3
 
Analysis of Foundry defects and Quality improvement of Sand casting
Analysis of Foundry defects and Quality improvement of Sand castingAnalysis of Foundry defects and Quality improvement of Sand casting
Analysis of Foundry defects and Quality improvement of Sand castingIRJET Journal
 
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s Doe
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s DoeIRJET- Flash Reduction in Pressure Die Casting using Taguchi’s Doe
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s DoeIRJET Journal
 
Study of effect of process parameter setting on porosity levels of aluminium ...
Study of effect of process parameter setting on porosity levels of aluminium ...Study of effect of process parameter setting on porosity levels of aluminium ...
Study of effect of process parameter setting on porosity levels of aluminium ...IOSR Journals
 
IRJET- Optimization of Plastic Injection Molding
IRJET- Optimization of Plastic Injection MoldingIRJET- Optimization of Plastic Injection Molding
IRJET- Optimization of Plastic Injection MoldingIRJET Journal
 
Presentation2_Agus Widyianto_MSME.pdf
Presentation2_Agus Widyianto_MSME.pdfPresentation2_Agus Widyianto_MSME.pdf
Presentation2_Agus Widyianto_MSME.pdfAgusWidyianto2
 
IRJET- Influence of Heat Treatment on Internal Stresses and Non-Homogenei...
IRJET-  	  Influence of Heat Treatment on Internal Stresses and Non-Homogenei...IRJET-  	  Influence of Heat Treatment on Internal Stresses and Non-Homogenei...
IRJET- Influence of Heat Treatment on Internal Stresses and Non-Homogenei...IRJET Journal
 
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESSEXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESSIRJET Journal
 
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...IJERA Editor
 
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...six sigma DMAIC approach for reducing quality defects of camshaft binding pro...
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...Niranjana B
 
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...IRJET Journal
 
An experimental study on factors affecting Cold Extrusion of steels
An experimental study on factors affecting Cold Extrusion of steelsAn experimental study on factors affecting Cold Extrusion of steels
An experimental study on factors affecting Cold Extrusion of steelsIRJET Journal
 
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...IRJET Journal
 
Six Sigma Case Study
Six Sigma Case StudySix Sigma Case Study
Six Sigma Case Studysanjay_asati
 
IRJET- Optimization of Process Parameter in Injection Moulding using Tagu...
IRJET-  	  Optimization of Process Parameter in Injection Moulding using Tagu...IRJET-  	  Optimization of Process Parameter in Injection Moulding using Tagu...
IRJET- Optimization of Process Parameter in Injection Moulding using Tagu...IRJET Journal
 
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...IRJET Journal
 
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...IJERA Editor
 

Similar to Ppttttt (20)

A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSA DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
 
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTSA DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
A DEVELOPMENT OF QUALITY IN CASTING BY MINIMIZING DEFECTS
 
Analysis of Foundry defects and Quality improvement of Sand casting
Analysis of Foundry defects and Quality improvement of Sand castingAnalysis of Foundry defects and Quality improvement of Sand casting
Analysis of Foundry defects and Quality improvement of Sand casting
 
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s Doe
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s DoeIRJET- Flash Reduction in Pressure Die Casting using Taguchi’s Doe
IRJET- Flash Reduction in Pressure Die Casting using Taguchi’s Doe
 
Study of effect of process parameter setting on porosity levels of aluminium ...
Study of effect of process parameter setting on porosity levels of aluminium ...Study of effect of process parameter setting on porosity levels of aluminium ...
Study of effect of process parameter setting on porosity levels of aluminium ...
 
C0941217
C0941217C0941217
C0941217
 
IRJET- Optimization of Plastic Injection Molding
IRJET- Optimization of Plastic Injection MoldingIRJET- Optimization of Plastic Injection Molding
IRJET- Optimization of Plastic Injection Molding
 
Presentation2_Agus Widyianto_MSME.pdf
Presentation2_Agus Widyianto_MSME.pdfPresentation2_Agus Widyianto_MSME.pdf
Presentation2_Agus Widyianto_MSME.pdf
 
IRJET- Influence of Heat Treatment on Internal Stresses and Non-Homogenei...
IRJET-  	  Influence of Heat Treatment on Internal Stresses and Non-Homogenei...IRJET-  	  Influence of Heat Treatment on Internal Stresses and Non-Homogenei...
IRJET- Influence of Heat Treatment on Internal Stresses and Non-Homogenei...
 
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESSEXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
 
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...
Analysis of Process Parameters for Optimization of Plastic Extrusion in Pipe ...
 
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...six sigma DMAIC approach for reducing quality defects of camshaft binding pro...
six sigma DMAIC approach for reducing quality defects of camshaft binding pro...
 
I05624751
I05624751I05624751
I05624751
 
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...
Optimization of Process Parameters Using Taguchi for Friction Stir Welding of...
 
An experimental study on factors affecting Cold Extrusion of steels
An experimental study on factors affecting Cold Extrusion of steelsAn experimental study on factors affecting Cold Extrusion of steels
An experimental study on factors affecting Cold Extrusion of steels
 
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
 
Six Sigma Case Study
Six Sigma Case StudySix Sigma Case Study
Six Sigma Case Study
 
IRJET- Optimization of Process Parameter in Injection Moulding using Tagu...
IRJET-  	  Optimization of Process Parameter in Injection Moulding using Tagu...IRJET-  	  Optimization of Process Parameter in Injection Moulding using Tagu...
IRJET- Optimization of Process Parameter in Injection Moulding using Tagu...
 
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...
IRJET - Mathematical Analysis of Angular Distortion on GTA Welded Hot Rolled ...
 
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...
Effect of Composition of Sand Mold on Mechanical Properties and Density of Al...
 

Recently uploaded

Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Christo Ananth
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile servicerehmti665
 
College Call Girls Nashik Nehal 7001305949 Independent Escort Service Nashik
College Call Girls Nashik Nehal 7001305949 Independent Escort Service NashikCollege Call Girls Nashik Nehal 7001305949 Independent Escort Service Nashik
College Call Girls Nashik Nehal 7001305949 Independent Escort Service NashikCall Girls in Nagpur High Profile
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxAsutosh Ranjan
 
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICS
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICSHARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICS
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICSRajkumarAkumalla
 
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Dr.Costas Sachpazis
 
Analog to Digital and Digital to Analog Converter
Analog to Digital and Digital to Analog ConverterAnalog to Digital and Digital to Analog Converter
Analog to Digital and Digital to Analog ConverterAbhinavSharma374939
 
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)Suman Mia
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Dr.Costas Sachpazis
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxJoão Esperancinha
 
Introduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxIntroduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxupamatechverse
 
Introduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxIntroduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxupamatechverse
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 
Extrusion Processes and Their Limitations
Extrusion Processes and Their LimitationsExtrusion Processes and Their Limitations
Extrusion Processes and Their Limitations120cr0395
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxupamatechverse
 
main PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfidmain PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfidNikhilNagaraju
 
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escortsranjana rawat
 
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130Suhani Kapoor
 

Recently uploaded (20)

Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile service
 
College Call Girls Nashik Nehal 7001305949 Independent Escort Service Nashik
College Call Girls Nashik Nehal 7001305949 Independent Escort Service NashikCollege Call Girls Nashik Nehal 7001305949 Independent Escort Service Nashik
College Call Girls Nashik Nehal 7001305949 Independent Escort Service Nashik
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptx
 
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICS
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICSHARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICS
HARDNESS, FRACTURE TOUGHNESS AND STRENGTH OF CERAMICS
 
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
 
Analog to Digital and Digital to Analog Converter
Analog to Digital and Digital to Analog ConverterAnalog to Digital and Digital to Analog Converter
Analog to Digital and Digital to Analog Converter
 
DJARUM4D - SLOT GACOR ONLINE | SLOT DEMO ONLINE
DJARUM4D - SLOT GACOR ONLINE | SLOT DEMO ONLINEDJARUM4D - SLOT GACOR ONLINE | SLOT DEMO ONLINE
DJARUM4D - SLOT GACOR ONLINE | SLOT DEMO ONLINE
 
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
 
Introduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxIntroduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptx
 
Introduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxIntroduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptx
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 
Extrusion Processes and Their Limitations
Extrusion Processes and Their LimitationsExtrusion Processes and Their Limitations
Extrusion Processes and Their Limitations
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptx
 
main PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfidmain PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfid
 
Exploring_Network_Security_with_JA3_by_Rakesh Seal.pptx
Exploring_Network_Security_with_JA3_by_Rakesh Seal.pptxExploring_Network_Security_with_JA3_by_Rakesh Seal.pptx
Exploring_Network_Security_with_JA3_by_Rakesh Seal.pptx
 
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
 
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
 

Ppttttt

  • 1. BY PRASAN KINAGI M.Tech in Production Management USN-2BV12MPM06 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 1
  • 2.  Company profile  Background  Casting process  Problem statement, objective, scope  Literature review  Methodology  FMEA  Data collection  Experiment details  Confirmatory test results  Conclusion  References BVB COLLEGE OF ENGINEERING & TECHNOLOGY 2
  • 3. Harihar, Karnataka Foundry Family-owned duct 30 Eicher 298, APEGL 435,400 Laxmi foundry, Velkast are other owned industry Place Sector Ownership Employees Products BVB COLLEGE OF ENGINEERING & TECHNOLOGY 3
  • 4.  Sand Casting is simply melting the metal and pouring molten metal into mold cavity, allowing the metal to solidify and then breaking up the mold to remove casting.  It is also called as sand molded casting, is a metal casting process characterized by using sand as the mold material.  Sand casting is relatively cheap  All foundry processes generate a certain level of rejection is closely related to the type of casting, the processes used and the equipment's available  The rejected casting can only be re-melted and the value addition made during process such as melting BVB COLLEGE OF ENGINEERING & TECHNOLOGY 4
  • 5.  Most of the foundries have no precise knowledge of the main causes of rejection because they fail to maintain a satisfactory quality control system.  Producing defect free casting is impossible, hence it deals with systematic to understanding and development of quality in cast iron foundry. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 5
  • 6. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 6
  • 7. Problem Statement  Minimizing casting defects Project Objective  Identification of defects in engine casing(Eicher-298) and causes  The main objective of this project is to optimize sand casting process parameter using DOE method through Taguchi method. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 7
  • 8. Scope  The project is limited to minimization of casting defects at pradeep enterprises, harihara Project significance Producing defect free casting is impossible, so attempt has been made to minimize the casting defects. In today’s competitive and challenging environment, organizations strive to have competitive advantage so  Improve production and quality  Increase customer satisfaction BVB COLLEGE OF ENGINEERING & TECHNOLOGY 8
  • 9.  It is important for manufacturing industry to achieve quality level[1]  Quality can be achieved by reducing defects and by controlling process parameters relating to the potential cause of defects  Studying the cause of defect is best solution to get rid of defects[4]  No of defects increases due to pouring temperature, improper pouring and lack of trained workers  Defects motivated researcher to identify defects and to know potential causes of failure  From literature review it concluded that application of Pareto analysis; failure mode effect analysis and design of experiment can significantly minimize the defects of manual casting operation. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 9
  • 10. Rejection Analysis Identification of causes by FMEA Defects due to sand, pouring, mold Pareto analysis Identification of parameter, levels affecting defects Selection of optimal level Review checking and improvement BVB COLLEGE OF ENGINEERING & TECHNOLOGY 10
  • 11.  FMEA analysis are used to determine which failures are likely to appear and what corrective actions are necessary for failure prevention.  FMEA is the set of guidelines for identifying and prioritizing the potential failure or defects  We are going to prioritize the defects by finding the RPN no. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 11
  • 12. For cold shut Poor pouring practice Low pouring temperature Low metal fluidity For blow hole BVB COLLEGE OF ENGINEERING & TECHNOLOGY 12
  • 13. Defects Potential failure mode Potential cause for failure S O D RPN Blowhole Internal voids with depression Moisture left in mold and core 7 6 6 252 Cold shut Small shot like sphere Due to rapid solidification before filling up of mold 8 8 5 320 shrinkage Reduction in volume Due to lack of riser system 4 4 4 64 Sand inclusion Inclusion of sand on the edges of casted surface Improper ramming of sand 7 5 5 175 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 13
  • 14. Month Production Total rejection Cold metal Blow hole Sand inclusion Others February 4210 508 202 138 96 72 March 3975 318 119 92 63 44 April 3508 186 97 30 42 17 Total 11693 1012 418 260 201 133 Rejection data sheet Data shows the total production per month and the data is of three months. Rejection of total Eicher-298 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 14
  • 15. With the help of Pareto chart, factors that influenced the rejection most are identified. The above graph shows the percentage rejection of defects and also cumulative percentage of defects. From the above Pareto graph 3.6% cold metal defects, 2.2% blowhole defects occur and it came it out as major defects and sand inclusion also effects. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 15
  • 16.  Experiments were carried out in foundry industry producing CI components. The analysis of casting defects involves selecting parameters and their levels. Performing experiments as per DOE (Taguchi method) and collect data.  As per rejection analysis it was found that the component EICHER- 298 rejection was maximum due to sand inclusion, blowhole and cold shut. So this component is selected for analysis by DOE method.  Proper selection of the casting parameters can results in minimum casting defects. Optimization of these casting parameters based on 3 levels and 4 factors is adopted in this paper to minimize the casting defects. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 16
  • 17. Sl. no code Factors(unit) Levels 1 2 3 1 A Pouring temperature 1380 1410 1440 2 B Inoculant 0.1 0.2 0.3 3 C Moisture content 3 3.3 3.6 4 D Sand binder ratio 60:0.9 60:1 60:1.2 Factors and their level BVB COLLEGE OF ENGINEERING & TECHNOLOGY 17
  • 18. Trial No. Level of factor A B C D 1. 1380 0.1 3 60:0.9 2. 1380 0.2 3.3 60:1 3. 1380 0.3 3.6 60:1.2 4. 1410 0.1 3.3 60:1.2 5. 1410 0.2 3.6 60:0.9 6. 1410 0.3 3 60:1 7. 1440 0.1 3.6 60:1 8. 1440 0.2 3 60:1.2 9. 1440 0.3 3.3 60:0.9 Experiment layout plan of L9 Taguchi orthogonal array BVB COLLEGE OF ENGINEERING & TECHNOLOGY 18
  • 19. Trial No. Level of factor Number of defects in % (for each 10 products) A B C D 1. 1380 0.1 3 60:0.9 40 2. 1380 0.2 3.3 60:1 30 3. 1380 0.3 3.6 60:1.2 40 4. 1410 0.1 3.3 60:1.2 70 5. 1410 0.2 3.6 60:0.9 60 6. 1410 0.3 3 60:1 50 7. 1440 0.1 3.6 60:1 40 8. 1440 0.2 3 60:1.2 40 9. 1440 0.3 3.3 60:0.9 30 BVB COLLEGE OF ENGINEERING & TECHNOLOGY S/N ratio -32.04 -29.54 -32.04 -36.90 -35.56 -33.97 -32.04 -32.04 -29.54 19
  • 20. Factors Levels (dB) Optimum value Optimum level L1 L2 L3 A -31.21 -35.48 -31.21 -31.21 1&3 B -33.66 -32.38 -31.85 -31.85 3 C -32.69 -32 -33.22 -32 2 D -32.38 -31.85 -33.66 -31.85 2 Optimum mean =-29.02 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 20
  • 21. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 144014101380 -31 -32 -33 -34 -35 0.30.20.1 3.63.33.0 -31 -32 -33 -34 -35 60:1.260:160:0.9 A MeanofSNratios B C D Main Effects Plot for SN ratios Data Means Signal-to-noise: Smaller is better 21
  • 22. Factors Degrees of Freedom Sum of Squares Mean Squares Contribution % A 2 36.46 18.23 74.27 B 2 5.19 2.59 10.57 C 2 2.24 1.12 4.56 D 2 5.19 2.59 10.57 Error 0 0 - - Total 8 49.09 6.45 99.97 BVB COLLEGE OF ENGINEERING & TECHNOLOGY Factor Pooled: B&C(Because of less contribution on total variation of S/N ratio) 22
  • 23. Sl.no Pouring temperature inoculant Moisture content Sand- Binder Ratio Defects In % S/N Ratio 1. 1380 0.3 3.3 60:0.1 20 -26.02 2. 1440 0.3 3.3 60:0.1 20 -26.02 Average signal to noise ratio= -26.02 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 23
  • 24. Levels (A, B, C, D) 1-3-2-2 Signal to noise ratio observed (ηobs), dB -26.02 Predicted Signal to noise ratio (ηpred), dB -29.65 Prediction error, dB 3.63 Confidence limit ( 2σ), dB ±2.39 BVB COLLEGE OF ENGINEERING & TECHNOLOGY 24
  • 25.  Pareto principle is used to identify and evaluate different defects and causes for these defects responsible for rejection of components at different stages of manual metal casting operations. The correct identification of the casting defect at initial stage is very useful for taking remedial actions.  The optimized levels of selected process parameter so obtained by Taguchi-method are pouring temperature(A): 1380&1440, inoculant(B):0.3, moisture content(C): 3.3, sand binder ratio(D):60:1.  The percentage contribution of error is within 15%, which indicates that, no important factors are left out from analysis.  The result of verification experiments has shown the quality of additive model is adequate and percentage of improvement is satisfactory. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 25
  • 26.  Design of experiments method such as Taguchi method can be efficiently applied for deciding the optimum settings of process parameters to have minimum rejection due to defects for a new casting as well as for analysis of defects in existing casting. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 26
  • 27.  The future scope of this experiment can further guide in selecting the various combinations for the process with mode trails can help in minimizing the defects of castings. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 27
  • 28. 1]Shepherd, N., Economics of quality and activity based management: The bridge to continuous improvement,The Management Accounting Magazine, Vol. 69, No. 2, pp. 29-32, 1995. 2] Schonberger, R.J., E.M. Jr, Operations Management, Fourth edition, IL and Boston, 1991. 3] Schneider man, A.M., Optimum quality costs and zero defects: are they contradictory concepts Quality Progress, Vol. 19, No. 11, pp. 29, 1986. 4] Achamyeleh A. Kassie, Samuel B. Assfaw,C Minimization of casting, School of Mechanical and Industrial Engineering Bahirdar University, Bahirdar, Ethiopia BVB COLLEGE OF ENGINEERING & TECHNOLOGY 28
  • 29. 5]S. Kuyucak, “Sponsored Research: Clean Steel Casting production – Evaluation of Laboratory Castings”, American Foundry Society, 2007 6]Piyush Kumar Pareek,Fmea Implementation In A Foundry In Bangalore To Improve Quality And Reliability 7] H.C. Pandit, AmitSata, V. V. Mane, Uday A. Dabade,2012, “A Novel Web-based system for Casting Defect Analysis”, paper published in technical transactions of 60th Indian Foundry Congress, 2-4th March2012, Bangalore,pp 535-544 8]Rahul Bhedasgaonkar, Uday A. Dabade, May 2012, “Analysis of casting Defects by Design of Experiments Method”, Proceedings of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing VISION 2020,organised by BIT, Mesra, Ranchi, India. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 29
  • 30. BVB COLLEGE OF ENGINEERING & TECHNOLOGY 30