This document contains graphs and tables summarizing student approval percentages for various subjects in the 1st trimester of the 2017-2018 school year at Escuela Secundaria Técnica 6 in Querétaro, Mexico. Approval percentages are shown for groups 1G through 1K in subjects like Spanish, English, Math, Science, Technology, History, Geography, Physical Education and Arts. Approval rates ranged from around 70-100% across subjects and groups.
This document summarizes student performance and approval rates across subjects and grades for the 4th quarter of the school year. Overall, average student grades were 7.8 and the approval rate was 91%. By grade, approval rates ranged from 83.1% for 1st grade morning students to 96.1% for 3rd grade morning students. Performance was also shown by subject, with averages of 93.9% in Science and 98.6% in Art.
This document contains approval percentages and average grades for various subjects like Spanish, English, Math, etc. for different 1st and 2nd grade groups (A, B, C, etc.) in the second bimester of the 2015-2016 school year. Approval percentages ranged from around 75% to 100% across subjects and groups, while average grades were typically between 6-9 points.
Avances en individual, Primer bimestres. EST6 Querétaro.Usebeq
The document provides statistics on student performance in the first bimester of the 2015 school year for a technical secondary school in Mexico. It includes enrollment numbers, attendance rates, and average grades by subject for each of the school's six grades. Overall, attendance rates across grades and subjects averaged around 95% with average grades between 7 and 8 out of 10. The lowest attendance and grades were in the first grade.
This document appears to contain academic performance data for multiple students across various subjects for the first trimester. It includes percentages for each subject as well as overall averages for groups of students designated by letters and numbers. The data is organized by grade, group, and individual subjects with percentages of approval and grades provided.
This document contains statistical graphs summarizing the approval percentages, average grades, and subject grades for various groups in the 2nd bimester at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It shows the results for each subject (Spanish, English, Math, etc.) for multiple 1st, 2nd, and 3rd year groups, with approval percentages ranging from around 70-100% across subjects and groups.
This document contains statistics on student performance in various subjects for the 3rd bimester of the 2016-2017 school year for different groups at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It shows the percentage of students who passed each subject, along with the average grade, for subjects like Spanish, English, Math, Science, Technology and others. Passing percentages ranged from around 65% to 100% depending on the subject and student group.
This document contains statistics on approval percentages and average grades for various subjects in different groups for the 2nd grading period of the 2016-2017 school year at a technical high school in Queretaro, Mexico. Approval percentages ranged from 68.4% to 100% across subjects and groups. Average grades were typically between 6.5 and 8.8 on a 10-point scale. Subjects included Spanish, English, Math, Science, Technology, Geography, Arts and others.
This document contains statistics on pass rates and average grades for various subjects in the 3rd grading period of the 2016-2017 school year for different groups at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It includes tables with the pass rate and average grade for each subject (Spanish, English, Math, etc.) for each group (1st A, 1st B, etc.). The pass rates range from around 50% to 100% across subjects and groups.
This document summarizes student performance and approval rates across subjects and grades for the 4th quarter of the school year. Overall, average student grades were 7.8 and the approval rate was 91%. By grade, approval rates ranged from 83.1% for 1st grade morning students to 96.1% for 3rd grade morning students. Performance was also shown by subject, with averages of 93.9% in Science and 98.6% in Art.
This document contains approval percentages and average grades for various subjects like Spanish, English, Math, etc. for different 1st and 2nd grade groups (A, B, C, etc.) in the second bimester of the 2015-2016 school year. Approval percentages ranged from around 75% to 100% across subjects and groups, while average grades were typically between 6-9 points.
Avances en individual, Primer bimestres. EST6 Querétaro.Usebeq
The document provides statistics on student performance in the first bimester of the 2015 school year for a technical secondary school in Mexico. It includes enrollment numbers, attendance rates, and average grades by subject for each of the school's six grades. Overall, attendance rates across grades and subjects averaged around 95% with average grades between 7 and 8 out of 10. The lowest attendance and grades were in the first grade.
This document appears to contain academic performance data for multiple students across various subjects for the first trimester. It includes percentages for each subject as well as overall averages for groups of students designated by letters and numbers. The data is organized by grade, group, and individual subjects with percentages of approval and grades provided.
This document contains statistical graphs summarizing the approval percentages, average grades, and subject grades for various groups in the 2nd bimester at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It shows the results for each subject (Spanish, English, Math, etc.) for multiple 1st, 2nd, and 3rd year groups, with approval percentages ranging from around 70-100% across subjects and groups.
This document contains statistics on student performance in various subjects for the 3rd bimester of the 2016-2017 school year for different groups at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It shows the percentage of students who passed each subject, along with the average grade, for subjects like Spanish, English, Math, Science, Technology and others. Passing percentages ranged from around 65% to 100% depending on the subject and student group.
This document contains statistics on approval percentages and average grades for various subjects in different groups for the 2nd grading period of the 2016-2017 school year at a technical high school in Queretaro, Mexico. Approval percentages ranged from 68.4% to 100% across subjects and groups. Average grades were typically between 6.5 and 8.8 on a 10-point scale. Subjects included Spanish, English, Math, Science, Technology, Geography, Arts and others.
This document contains statistics on pass rates and average grades for various subjects in the 3rd grading period of the 2016-2017 school year for different groups at Escuela Secundaria Técnica 6 in Querétaro, Mexico. It includes tables with the pass rate and average grade for each subject (Spanish, English, Math, etc.) for each group (1st A, 1st B, etc.). The pass rates range from around 50% to 100% across subjects and groups.
This document appears to be a student's academic record showing their semester grade point averages (SGPA) and cumulative grade point averages (CGPA) over 10 semesters. The SGPA and CGPA scores are plotted on a graph with the CGPA trending upward from 6.61 to 9.48 over the course of study.
The document is a table showing the pressure-temperature relationships of various refrigerants including R-134a, R-410A, R-407C, and others. It provides the boiling point and dew point values in Fahrenheit and Celsius scales for each refrigerant across a range of temperatures from -40°F to 150°F. The table contains the key specifications needed to understand how pressure and temperature correlate for multiple common refrigerants.
This document provides demographic data for regions and counties in the United States and Hawaii, including population sizes, percentages of residents with high school diplomas and bachelor's or post-graduate degrees across different age groups. The data shows variations across regions and counties in educational attainment levels, with the Northeast generally having the highest percentages of residents with degrees and some rural Hawaiian counties having the lowest.
This document is an unofficial transcript for Jason Hall from Pierce College showing the courses taken between winter 2007 and summer 2014, along with the grades received. It shows that Jason earned an Associate of Arts degree and took a variety of courses including history, math, chemistry, physics and American Sign Language. His cumulative GPA was 3.18 out of 4.0.
This homework assignment contains 18 problems from chapter 6 that are due on April 17. The problems include 6.4C, 6.10C, 6.13C, 6.21, 6.23, 6.32C, 6.40, 6.50, 6.57, 6.80E, 6.81E, 6.90C, 6.96, 6.97, 6.99, 6.109, and 6.138.
This document shows the grades and scoring breakdown for a class. It lists students' IDs, scores on various assessments like quizzes, midterms, papers, participation and finals. It also shows the equivalent scores, total scores, and final letter grades for each student. The assessments included quizzes (10%), midterms (30%), a short paper (10%), participation (20%), a video (10%) and finals (20%). The document provides a detailed breakdown of individual student performance.
This document contains graphs showing the percentages of approval for the first bimester of the morning shift at Escuela Secundaria Técnica 6. It includes approval rates for each subject (Spanish, English, Math, Science, etc.) for each grade level (1st, 2nd, 3rd) and section (A, B, C, etc.). Overall approval rates ranged from around 70-100% across grade levels and subjects.
- The document contains a table showing the combustion efficiency of Number 2 diesel fuel at different excess air percentages and temperatures of the flue gases above the combustion air temperature.
- Combustion efficiency decreases as the excess air percentage and flue gas temperature increases.
- The table provides combustion efficiency percentages ranging from the high 80s to low 70s for a wide range of excess air and flue gas temperature conditions.
St st pipe_pressure_rating_charts_rev_sep_2010setyopermadi
This document provides allowable working pressure tables for stainless steel grade 304 seamless pipes according to ASTM A 312. It lists the design strength and allowable working pressures in megapascals at different temperatures for various pipe sizes and schedules. Notes are provided regarding the calculation method, applicability to piping classes, and additional factors that must be considered for welded pipes. Conversion factors are also listed to convert pressures to other common units.
Encuesta a niños y adolescentes sobre la radio y televisión peruana 2014 | Po...Andrinik Huaytalla Ramos
Encuesta realizada por el Consejo Consultivo de Radio y Televisión (Concortv) a niños y adolescentes sobre la radio y televisión peruana 2014. Encuesta por ciudades.
Educación Mediática ► http://www.mundoacesp.org/
This document provides information on Power-plus sealed lead acid batteries for various applications. Key details include:
- The batteries have a design life of 12 years and comply with various industry standards. They come in capacities from 35AH to 230AH.
- They use absorbed glass mat (AGM) technology and have a non-spillable, valve regulated lead acid design that requires no water additions.
- Applications include telecommunications, emergency lighting, UPS systems, and solar photovoltaic systems. The document provides specifications on voltage, temperature ranges, and discharge times at different currents.
The document contains two tables. Table 1 is a chart showing duct friction loss (Pa/m) at low flow rates for circular ducts of varying diameters. Table 2 provides equivalent circular duct diameters for rectangular ducts of different side dimensions to produce equal friction and flow. The tables provide specifications for selecting duct sizes in ventilation system design.
The document contains various numeric values, symbols, and special characters organized without labels or context. It is unclear what the intended meaning or purpose of the data is.
Production forecast and fuel 2020 rev00.pdfssuserb71d4d
The document provides production forecasts and fuel consumption estimates for RKAB for 2020. It includes forecasts of overburden removal and coal production by month. It also provides estimates of existing fleet capacity and production targets. Fuel consumption is estimated at 992,000 liters for the year using the existing fleet.
This document provides information on O-ring sizes from Ningbo Jiaodian Sealing Industry Co.,Ltd. It lists over 390 O-ring sizes with their inner diameter, cross-sectional thickness, and applicable standards. Most sizes are listed with inner diameter x cross-sectional thickness in millimeters. Materials include NBR, FKM, and EPDM with hardness from 50-90.
This document is a product catalog from Texas Flange & Fitting that provides information on various types of flanges that comply with ANSI standards for pipe sizes ranging from 1/2 inch to 24 inches. It includes dimensions and specifications for weld neck flanges, threaded flanges, slip-on flanges, lap joint flanges, socket weld flanges, and blind flanges in ANSI Class 150, 300, 400, 600, 900, 1500, and 2500. Contact information is provided at the end for ordering.
The document presents a time series analysis and forecasting of monthly yields on US Treasury securities. It describes taking the first difference and seasonal difference of the time series data to make it stationary, as tests showed the original data was non-stationary. ARIMA modeling was used to adaptively form an appropriate model based on the stationary data. The analysis was conducted in R using functions like boxcox, adf.test, kpss.test, decompose and plots to examine the data, identify patterns of trend and seasonality, and check for stationarity.
This document contains tables of critical values for various statistical tests including the z-distribution, t-distribution, chi-square distribution, and F-distribution. The z-distribution table lists critical values for the z-test across different levels of significance. Similarly, the other tables provide critical values for t-tests, chi-square tests, ANOVA, and other statistical analyses across different degrees of freedom and significance levels.
This document summarizes the hydrological modeling and analysis of the Coata River basin located in Puno, Peru. Key points:
- The GR2M hydrological model was calibrated on the Coata River basin from 1971-1994, achieving Nash coefficients of 84.99% for streamflow.
- The model was validated on data from 1995-2006, with Nash coefficients of 89.55% for streamflow, indicating good model performance.
- Precipitation in the sub-basins was estimated using Kriging interpolation. Mean monthly streamflows were then generated for a designated intake point in the basin.
The document provides summary statistics for 5 variables (v1-v5) measured in 200-201 observations. For each variable, it reports the number of valid and missing cases, measures of central tendency (mean, median, mode), dispersion (standard deviation, variance, range), and position (percentiles). Frequency tables display the count for each unique value in v1-v5. Stem-and-leaf plots further summarize the distribution of scores for each variable.
This document appears to be a student's academic record showing their semester grade point averages (SGPA) and cumulative grade point averages (CGPA) over 10 semesters. The SGPA and CGPA scores are plotted on a graph with the CGPA trending upward from 6.61 to 9.48 over the course of study.
The document is a table showing the pressure-temperature relationships of various refrigerants including R-134a, R-410A, R-407C, and others. It provides the boiling point and dew point values in Fahrenheit and Celsius scales for each refrigerant across a range of temperatures from -40°F to 150°F. The table contains the key specifications needed to understand how pressure and temperature correlate for multiple common refrigerants.
This document provides demographic data for regions and counties in the United States and Hawaii, including population sizes, percentages of residents with high school diplomas and bachelor's or post-graduate degrees across different age groups. The data shows variations across regions and counties in educational attainment levels, with the Northeast generally having the highest percentages of residents with degrees and some rural Hawaiian counties having the lowest.
This document is an unofficial transcript for Jason Hall from Pierce College showing the courses taken between winter 2007 and summer 2014, along with the grades received. It shows that Jason earned an Associate of Arts degree and took a variety of courses including history, math, chemistry, physics and American Sign Language. His cumulative GPA was 3.18 out of 4.0.
This homework assignment contains 18 problems from chapter 6 that are due on April 17. The problems include 6.4C, 6.10C, 6.13C, 6.21, 6.23, 6.32C, 6.40, 6.50, 6.57, 6.80E, 6.81E, 6.90C, 6.96, 6.97, 6.99, 6.109, and 6.138.
This document shows the grades and scoring breakdown for a class. It lists students' IDs, scores on various assessments like quizzes, midterms, papers, participation and finals. It also shows the equivalent scores, total scores, and final letter grades for each student. The assessments included quizzes (10%), midterms (30%), a short paper (10%), participation (20%), a video (10%) and finals (20%). The document provides a detailed breakdown of individual student performance.
This document contains graphs showing the percentages of approval for the first bimester of the morning shift at Escuela Secundaria Técnica 6. It includes approval rates for each subject (Spanish, English, Math, Science, etc.) for each grade level (1st, 2nd, 3rd) and section (A, B, C, etc.). Overall approval rates ranged from around 70-100% across grade levels and subjects.
- The document contains a table showing the combustion efficiency of Number 2 diesel fuel at different excess air percentages and temperatures of the flue gases above the combustion air temperature.
- Combustion efficiency decreases as the excess air percentage and flue gas temperature increases.
- The table provides combustion efficiency percentages ranging from the high 80s to low 70s for a wide range of excess air and flue gas temperature conditions.
St st pipe_pressure_rating_charts_rev_sep_2010setyopermadi
This document provides allowable working pressure tables for stainless steel grade 304 seamless pipes according to ASTM A 312. It lists the design strength and allowable working pressures in megapascals at different temperatures for various pipe sizes and schedules. Notes are provided regarding the calculation method, applicability to piping classes, and additional factors that must be considered for welded pipes. Conversion factors are also listed to convert pressures to other common units.
Encuesta a niños y adolescentes sobre la radio y televisión peruana 2014 | Po...Andrinik Huaytalla Ramos
Encuesta realizada por el Consejo Consultivo de Radio y Televisión (Concortv) a niños y adolescentes sobre la radio y televisión peruana 2014. Encuesta por ciudades.
Educación Mediática ► http://www.mundoacesp.org/
This document provides information on Power-plus sealed lead acid batteries for various applications. Key details include:
- The batteries have a design life of 12 years and comply with various industry standards. They come in capacities from 35AH to 230AH.
- They use absorbed glass mat (AGM) technology and have a non-spillable, valve regulated lead acid design that requires no water additions.
- Applications include telecommunications, emergency lighting, UPS systems, and solar photovoltaic systems. The document provides specifications on voltage, temperature ranges, and discharge times at different currents.
The document contains two tables. Table 1 is a chart showing duct friction loss (Pa/m) at low flow rates for circular ducts of varying diameters. Table 2 provides equivalent circular duct diameters for rectangular ducts of different side dimensions to produce equal friction and flow. The tables provide specifications for selecting duct sizes in ventilation system design.
The document contains various numeric values, symbols, and special characters organized without labels or context. It is unclear what the intended meaning or purpose of the data is.
Production forecast and fuel 2020 rev00.pdfssuserb71d4d
The document provides production forecasts and fuel consumption estimates for RKAB for 2020. It includes forecasts of overburden removal and coal production by month. It also provides estimates of existing fleet capacity and production targets. Fuel consumption is estimated at 992,000 liters for the year using the existing fleet.
This document provides information on O-ring sizes from Ningbo Jiaodian Sealing Industry Co.,Ltd. It lists over 390 O-ring sizes with their inner diameter, cross-sectional thickness, and applicable standards. Most sizes are listed with inner diameter x cross-sectional thickness in millimeters. Materials include NBR, FKM, and EPDM with hardness from 50-90.
This document is a product catalog from Texas Flange & Fitting that provides information on various types of flanges that comply with ANSI standards for pipe sizes ranging from 1/2 inch to 24 inches. It includes dimensions and specifications for weld neck flanges, threaded flanges, slip-on flanges, lap joint flanges, socket weld flanges, and blind flanges in ANSI Class 150, 300, 400, 600, 900, 1500, and 2500. Contact information is provided at the end for ordering.
The document presents a time series analysis and forecasting of monthly yields on US Treasury securities. It describes taking the first difference and seasonal difference of the time series data to make it stationary, as tests showed the original data was non-stationary. ARIMA modeling was used to adaptively form an appropriate model based on the stationary data. The analysis was conducted in R using functions like boxcox, adf.test, kpss.test, decompose and plots to examine the data, identify patterns of trend and seasonality, and check for stationarity.
This document contains tables of critical values for various statistical tests including the z-distribution, t-distribution, chi-square distribution, and F-distribution. The z-distribution table lists critical values for the z-test across different levels of significance. Similarly, the other tables provide critical values for t-tests, chi-square tests, ANOVA, and other statistical analyses across different degrees of freedom and significance levels.
This document summarizes the hydrological modeling and analysis of the Coata River basin located in Puno, Peru. Key points:
- The GR2M hydrological model was calibrated on the Coata River basin from 1971-1994, achieving Nash coefficients of 84.99% for streamflow.
- The model was validated on data from 1995-2006, with Nash coefficients of 89.55% for streamflow, indicating good model performance.
- Precipitation in the sub-basins was estimated using Kriging interpolation. Mean monthly streamflows were then generated for a designated intake point in the basin.
The document provides summary statistics for 5 variables (v1-v5) measured in 200-201 observations. For each variable, it reports the number of valid and missing cases, measures of central tendency (mean, median, mode), dispersion (standard deviation, variance, range), and position (percentiles). Frequency tables display the count for each unique value in v1-v5. Stem-and-leaf plots further summarize the distribution of scores for each variable.
This document contains data on 35 subjects. For each subject, it includes an identification number and scores on several tests ranging from 0-35. It then calculates percentages for each subject. Overall, test scores varied widely across subjects, with total scores ranging from 3 to 105 and percentages ranging from 0% to 89.52%.
This table provides the partial pressures in mmHg of nitric acid (HNO3) and water (H2O) over aqueous solutions of nitric acid at different concentrations and temperatures. The concentrations of the nitric acid solutions range from 20% to 100% by weight. The temperatures range from 0°C to 125°C. The table shows that as the concentration and temperature of the nitric acid solutions increase, the partial pressures of both HNO3 and H2O increase as well.
An Introduction to Statistical Methods and Data Analysis.pdfSandra Valenzuela
This document provides a table of standard normal curve areas. The table lists z-scores from -5 to 5 in increments of 0.1 on the left side. For each z-score, the corresponding area under the standard normal curve is provided to four decimal places. The areas decrease as the z-scores decrease from 0 to -5 and increase as the z-scores increase from 0 to 5. Below the table, it notes that the areas were computed using the R function pnorm and that the shaded area represents the probability Pr(Z ≤ z).
This document contains a recapitulation of final semester scores for the course "Entrepreneurship" for the accounting program at STIE-AUB Surakarta for the 2014/2015 academic year. It lists 33 students with their midterm, final exam, task, and final scores. The final scores range from 0 to 89 on a scale of A to E, with most students receiving a B or C. It was produced in Surakarta, January 2015 by the teaching lecturer Nani Irma Susanti.
Similar to Porcentaje aprob 1°bim tv 2017 2018 (20)
Este documento describe un proyecto para construir un dispositivo que muestre el fenómeno de la inducción eléctrica. El dispositivo consiste en un transformador con un primario de 80 vueltas y un secundario de 12,000 vueltas. Al conectarlo a una fuente de alimentación, se generan chispas en el secundario debido a la inducción mutua entre las bobinas. El objetivo es que los estudiantes aprendan conceptos como el voltaje y la frecuencia a través de este experimento práctico.
Procedimientos para trámites de permisos económicos y pago de tiempos fuera d...Usebeq
Este documento resume un viaje por la costa oeste de California, incluyendo fotos de la puesta de sol en Malibú y del Pacific Coast Highway. También incluye extractos de la legislación mexicana sobre permisos laborales y condiciones de trabajo, así como información sobre los tipos de documentación requerida para justificar ausencias laborales por razones de salud, legales o de seguridad.
Este documento trata sobre la innovación educativa. Define la innovación educativa como introducir cambios y soluciones a situaciones problemáticas en la práctica educativa con el objetivo de mejorar los procesos de enseñanza y aprendizaje. Explora las características, objetivos, tipos y principios de la innovación educativa según varios autores.
Este documento presenta varios modelos didácticos, incluyendo el modelo socrático basado en la mayéutica o diálogo, el modelo activo situado que enfatiza el protagonismo del estudiante, y el modelo colaborativo donde la enseñanza es una práctica colegiada. También describe brevemente el modelo de aprendizaje para el dominio y el modelo contextual-ecológico que considera el papel del entorno. El objetivo es facilitar el conocimiento de los procesos de enseñanza-aprendizaje y mejorar la
Proyecto de calentadores solares para estudiantes de educación secundaria (1)...Usebeq
El documento describe un proyecto de estudiantes de secundaria para diseñar y construir calentadores solares. Los estudiantes se dividieron en equipos y propusieron varias soluciones, incluido un serpentín de cobre. Decidieron usar tubería de cobre, codos y soldadura de estaño-plomo. Planearon los materiales, costos y presentaron el producto terminado. El enfoque pedagógico del taller es promover el estudio práctico de la técnica y resolver problemas para satisfacer necesidades a través de proyectos
SIMULADORES Y PRACTICAS DE LABORATORIO (1).pptxUsebeq
Este documento presenta dos técnicas de evaluación: prácticas de laboratorio y simulación. Las prácticas de laboratorio acercan a los estudiantes a situaciones reales para aplicar conocimientos teóricos. El profesor ayuda al estudiante y se enfatiza la producción sobre la reproducción. La simulación representa situaciones reales donde los estudiantes asumen roles para resolver problemas o experimentar situaciones, lo que favorece el aprendizaje por descubrimiento.
El documento proporciona información sobre una persona llamada Martin Francisco Martinez Torres. Contiene su nombre completo y algunos detalles básicos sobre su identidad.
El documento habla sobre la importancia de la educación tecnológica en los ámbitos económico, sociocultural y educativo. Explica que la alfabetización tecnológica se da en tres niveles: usuario inteligente, personas lúcidas y críticas, y creativo eficaz. También enumera siete propósitos de la educación tecnológica. Por último, informa que a partir del 10 de marzo los estudiantes serán asignados a diferentes talleres tecnológicos de acuerdo a un diagnóst
El documento proporciona orientaciones para el manejo del historial de incidencias de los estudiantes y herramientas para fomentar la disciplina escolar. Describe los roles y responsabilidades de los docentes, prefectos, orientación educativa, trabajo social y dirección escolar en el apoyo a los estudiantes y la toma de decisiones conforme al acuerdo de convivencia. Además, define conceptos clave como aprendizaje, conducta, apoyo, acciones y canalizar.
Este documento presenta los programas de estudio 2011 para la asignatura de Tecnología en la educación secundaria. Se describe la fundamentación y los enfoques pedagógicos de la asignatura, así como los contenidos de los tres grados de secundaria. Además, incluye la bibliografía y anexos con conceptos básicos y orientaciones didácticas generales.
Evaluar a través de situaciones auténticas (1) (3).pdfUsebeq
Este documento describe la evaluación auténtica y sus características. La evaluación auténtica implica evaluar a los estudiantes a través de situaciones realistas que son intelectualmente desafiantes y requieren demostrar habilidades en un contexto similar a la vida real. Las actividades auténticas deben ser complejas, tener un propósito definido y dirigirse a una audiencia real. También requieren que los estudiantes asuman roles realistas y colaboren con otros. La evaluación auténtica es importante porque mejora la transferencia de conocimientos de
El documento presenta un análisis estadístico del tercer bimestre de una escuela secundaria en 2016-2017. Incluye gráficas que muestran los resultados académicos de los estudiantes en varias materias agrupados en cuatro rangos de calificación, así como una guía para interpretar las gráficas. El objetivo es identificar a los estudiantes en riesgo y proponer estrategias de apoyo.
El documento describe diferentes herramientas y métodos para la crianza de niños sin utilizar la violencia. Explica que poner límites a los niños de manera adecuada contribuye a su formación y enseña responsabilidad, pero que usar la violencia física o psicológica solo causa daños a largo plazo. También enfatiza la importancia de comunicarse con los niños de manera franca y establecer un clima de respeto, cariño y armonía en la familia.
Este documento presenta los horarios escolares de las diferentes asignaturas para los grupos de primer año (1o "A", 1o "B", 1o "C", 1o "D") y segundo año (2o "A") de la Escuela Secundaria Técnica No. 16 "José Ma. Luis Mora" para el ciclo escolar 2021-2022, indicando los días y horas de cada asignatura.
El documento presenta los horarios escolares de dos grupos (1o "G" y 1o "H") de la Escuela Secundaria Técnica No. 16 "José Ma. Luis Mora" para el ciclo escolar 2021-2022, dividiendo la semana en 8 módulos con las asignaturas correspondientes a cada día para cada grupo y los profesores a cargo de cada asignatura.
El documento presenta el plan de regreso a clases presenciales de forma híbrida de la Escuela Secundaria Técnica No. 16 "José Ma. Luis Mora" a partir del 24 de enero de 2022. El alumnado será dividido en tres subgrupos que asistirán de forma alternada para respetar la sana distancia. Se incluye un calendario detallado con el esquema de asistencia para cada subgrupo de enero a julio, así como listas de los alumnos de los grupos de primer año A, B y
El documento presenta el plan de regreso a clases presenciales de forma híbrida de la Escuela Secundaria Técnica No. 16 "José Ma. Luis Mora" a partir del 17 de enero de 2022. El alumnado será dividido en tres subgrupos que asistirán de forma alternada los días de la semana para reducir contagios. También incluye los calendarios de actividades por subgrupo de enero a julio.
La carta desea a los alumnos, padres y maestros una Feliz Navidad, expresando que estas fiestas navideñas reavivan el deseo de compartir y dar. El maestro Paco Martínez espera que todos disfruten de cada momento de estas maravillosas fiestas.
Comunicado 1 calendario de retorno seguro a clasesUsebeq
El comunicado informa a los padres de familia que a partir del 3 de enero de 2022, los estudiantes de la Escuela Secundaria Técnica No. 16 "José Ma. Luis Mora" asistirán a clases presenciales siguiendo un modelo de regreso seguro. Los grupos serán divididos en tres subgrupos que asistirán a clases de manera escalonada cada día de la semana, para respetar la sana distancia dentro del aula. El comunicado también incluye los calendarios de actividades por subgrupo para cada mes del per
El documento anuncia un simulacro para un regreso seguro a clases presenciales. Se llevará a cabo del 3 al 5 de enero con los alumnos divididos en tres subgrupos. Se pide a los padres que respeten las medidas sanitarias como el uso de cubrebocas y gel antibacterial, y que traigan sus propios materiales escolares. El simulacro ayudará a la comunidad escolar a aprender los procedimientos para ingresar, permanecer y salir de la escuela de forma segura.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1