BusinessVibes (www.businessvibes.com) organized rubber and plastics industry webinar showcasing industry updates, trends and challenges from industry bigwigs The British Plastics Federation, Plastics Europe - Association of Plastics Manufacturers, The Italian Plastics and Rubber Machinery Industry (Assocomaplast) and Malaysian Rubber Board
Delivering high diversion municipal recycling in the UK – lessons from a 25 y...Ricardo- AEA
Dr. Adam Read – Director Waste Management & Resource Efficiency, AEA
Presentation at Zero Waste Summit 2012, 22nd October 2012
Hilton on the Park, Melbourne
WASTE INFRASTRUCTURE COMMUNITY ENGAGEMENT – A UK TOOLKITRicardo- AEA
A presentation by AEA's Technical Director, David Lerpiniere, originally delivered at the International Solid Waste Association's annual conference in Florence, Italy (September 2012).
Welsh EfW policy - technology assessment of high thermal efficiency solutionsRicardo- AEA
Welsh EfW policy - technology assessment of high thermal efficiency solutions.
Presented by Kathryn Warren, Senior Consultant, Waste Management & Resource Efficiency.
Presented at the Air & Waste Management Association’s 105th Annual Conference & Exhibition, San Antonio, June 19-22, 2012.
Delivering high diversion municipal recycling in the UK – lessons from a 25 y...Ricardo- AEA
Dr. Adam Read – Director Waste Management & Resource Efficiency, AEA
Presentation at Zero Waste Summit 2012, 22nd October 2012
Hilton on the Park, Melbourne
WASTE INFRASTRUCTURE COMMUNITY ENGAGEMENT – A UK TOOLKITRicardo- AEA
A presentation by AEA's Technical Director, David Lerpiniere, originally delivered at the International Solid Waste Association's annual conference in Florence, Italy (September 2012).
Welsh EfW policy - technology assessment of high thermal efficiency solutionsRicardo- AEA
Welsh EfW policy - technology assessment of high thermal efficiency solutions.
Presented by Kathryn Warren, Senior Consultant, Waste Management & Resource Efficiency.
Presented at the Air & Waste Management Association’s 105th Annual Conference & Exhibition, San Antonio, June 19-22, 2012.
"Ceramic Roadmap to 2050" | Dr Laura CohenCerame-Unie
"Ceramic Roadmap to 2050" by Dr Laura Cohen, British Ceramic Confederation.
Presentation made in the context of the Ceramic Days 2012 and the publication of "Paving the way to 2050: The Ceramic Industry Roadmap".
On April 17 2015 the Committee on Climate Change held their first meeting in Wales, Cardiff. A range of stakeholders were invited to discuss the challenges faced by Wales in implementing its low-carbon strategy.
Sustainability challenge of the aluminum industry: transforming wastes into p...Marcelo Suster
The work that follows is a contribution to the aluminum industry’s sustainability. It deals with the critical issue of solid wastes accruing to that sector. By-products from aluminum refining are solid wastes, liquid effluents and gaseous emissions. Each kilogram of metal produced is accompanied by three and a half kilograms of bauxite residue, commonly known as red mud. Current practice is to use decantation lagoons that are built with elaborate precautions for preventing environmental contamination. The aim of the present work is to investigate this pollutant within the perspective of current solid industrial waste technologies, and to study the practicalities for utilization and new processes. The very high ratio residue/end product provides a strong incentive insofar as the residue concerned does in fact offer numerous commercial opportunities. Thus the feasibility of converting the residue into a raw material is a real alternative to landfill disposal. Numerous industrial processes and technologies have been considered in relation to environmental legislation, industrial marketing, competitive processes and other factors. In conclusion the subject paper recommends a series of activities that would achieve transformation of red mud into valuable substances and substitute other existing raw materials without adversely affecting quality and the environment.
In this webinar, we will explore:
Why is liner selection important?
What does Total Insight mean and why is it important?
Why are accurate pH readings so important?
Why does pH measurement have to be so difficult?
This presentation from Resource Efficiency and Waste Management 2013 highlights the key issues from i2i’s sector report ‘Resource Efficiency & Waste Management Market Opportunity’ as well as Professor Adam Read’s personal observations.
The report, researched and authored by Ricardo-AEA, combines data, expertise and research collated from leading experts in the field, providing;
• A detailed overview of the UK waste management sector
• Insights into future European waste policy
• Updates on UK waste policies
• Market opportunities in infrastructure, transport, re-use, the circular economy
• Viewpoints from the public & private sectors
Circular Economy Thinking in Construction: A view from UK Manufacturers #CETH...Circular Economy Thinking
Presentation by Jane Thornback of the Construction Products Association at Circular Economy Thinking: Challenges and Opportunities for the Construction Sector #CEthinking
More information at http://www.greenconstructionboard.org/index.php/circular-economy-thinking
Sustainable Communities SA public meeting 18 April 2012 at Burnside Community Centre. Professor Peter Newman from Curtin University spoke about sustainability in communities with a focus on transport and reducing car dependence.
"Ceramic Roadmap to 2050" | Dr Laura CohenCerame-Unie
"Ceramic Roadmap to 2050" by Dr Laura Cohen, British Ceramic Confederation.
Presentation made in the context of the Ceramic Days 2012 and the publication of "Paving the way to 2050: The Ceramic Industry Roadmap".
On April 17 2015 the Committee on Climate Change held their first meeting in Wales, Cardiff. A range of stakeholders were invited to discuss the challenges faced by Wales in implementing its low-carbon strategy.
Sustainability challenge of the aluminum industry: transforming wastes into p...Marcelo Suster
The work that follows is a contribution to the aluminum industry’s sustainability. It deals with the critical issue of solid wastes accruing to that sector. By-products from aluminum refining are solid wastes, liquid effluents and gaseous emissions. Each kilogram of metal produced is accompanied by three and a half kilograms of bauxite residue, commonly known as red mud. Current practice is to use decantation lagoons that are built with elaborate precautions for preventing environmental contamination. The aim of the present work is to investigate this pollutant within the perspective of current solid industrial waste technologies, and to study the practicalities for utilization and new processes. The very high ratio residue/end product provides a strong incentive insofar as the residue concerned does in fact offer numerous commercial opportunities. Thus the feasibility of converting the residue into a raw material is a real alternative to landfill disposal. Numerous industrial processes and technologies have been considered in relation to environmental legislation, industrial marketing, competitive processes and other factors. In conclusion the subject paper recommends a series of activities that would achieve transformation of red mud into valuable substances and substitute other existing raw materials without adversely affecting quality and the environment.
In this webinar, we will explore:
Why is liner selection important?
What does Total Insight mean and why is it important?
Why are accurate pH readings so important?
Why does pH measurement have to be so difficult?
This presentation from Resource Efficiency and Waste Management 2013 highlights the key issues from i2i’s sector report ‘Resource Efficiency & Waste Management Market Opportunity’ as well as Professor Adam Read’s personal observations.
The report, researched and authored by Ricardo-AEA, combines data, expertise and research collated from leading experts in the field, providing;
• A detailed overview of the UK waste management sector
• Insights into future European waste policy
• Updates on UK waste policies
• Market opportunities in infrastructure, transport, re-use, the circular economy
• Viewpoints from the public & private sectors
Circular Economy Thinking in Construction: A view from UK Manufacturers #CETH...Circular Economy Thinking
Presentation by Jane Thornback of the Construction Products Association at Circular Economy Thinking: Challenges and Opportunities for the Construction Sector #CEthinking
More information at http://www.greenconstructionboard.org/index.php/circular-economy-thinking
Sustainable Communities SA public meeting 18 April 2012 at Burnside Community Centre. Professor Peter Newman from Curtin University spoke about sustainability in communities with a focus on transport and reducing car dependence.
BusinessVibes (www.businessvibes.com) organized Renewable Energy Webinar on 15-Apr-2011 to showcase the industry trends, current situation and challenges within the industry
Finnish Wind Power Association, Indian Wind turbine Manufacturers Association
BusinessVibes organized Textile webinars to showcase industry trends and growth updates from textile industry experts and chiefs at prominent associations at Textile Machinery Manufacturers Association (TMMA), Bangladesh Garment Manufacturers and Exporters Associations (BGMEA), Bombay Textile Research Association (BTRA) and Towel Manufacturers Associaiton of Pakistan
Internet Trends, Mobile Penetration and Online Advertising (by Mary Meeker)BusinessVibes_Network
Internet Trends by Mary Meeker provides global internet growth, mobile device evolution, online monetization, supporting platforms and related insights on digital media growth and forecasts
BusinessVibes (www.businessvibes.com) was part of the event and thought of sharing it as a valuable material for businesses who could leverage the statistical insights
Search Engine Optimization (SEO) is a set of techniques by which you can move your website above other sites on non-paid listings across Search Engines.
The objective is to improve visibility of your website and thereby translating in to more queries and building core clients
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
FIA officials brutally tortured innocent and snatched 200 Bitcoins of worth 4...jamalseoexpert1978
Farman Ayaz Khattak and Ehtesham Matloob are government officials in CTW Counter terrorism wing Islamabad, in Federal Investigation Agency FIA Headquarters. CTW and FIA kidnapped crypto currency owner from Islamabad and snatched 200 Bitcoins those worth of 4 billion rupees in Pakistan currency. There is not Cryptocurrency Regulations in Pakistan & CTW is official dacoit and stealing digital assets from the innocent crypto holders and making fake cases of terrorism to keep them silent.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
3. The British Plastics Federation
• Longest established plastics Trade Federation in the
world
• Unique in Europe due to diverse membership
– Including materials, machinery and processors
• Represent 75% of industry by turnover
• 400 direct members, 1600 including affiliates
– Covering 140,000+ staff
6. Memorandum of Understanding
Signed MoU’s with….
– Organisation of Plastics
Processors of India (OPPIA)
– China Plastic Processing Industry
Association
– Plastindia Foundation
– All India Plastic Manufacturers
Association (AIPMA)
– Vietnam Plastics Association
8. The Plastics Industry in Great Britain
• Plastics industry turnover £19 bn
• Value of exports - £4.6 billion
• Material Processed - 4.8 million tonnes
• Plastics materials produced - 2.5 million
tonnes
• 25% of plastics products manufactured are
exported
• People employed - 186,000
• Over 3,000 primary processors
• 7,430 companies in the plastics industry
11. Location of Plastics Companies
Polymer Av. Employees Per
Companies Employees Company
North West 925 26500 29
North East 335 10500 31
Yorkshire and
Humberside 735 18800 26
East Midlands 750 22400 30
West Midland 875 21000 24
East 775 19100 25
South East 915 19100 21
South West 675 13700 20
London 390 6100 16
Wales 445 11900 27
Scotland 345 9900 29
Northern Ireland 265 7000 26
Total 7430 186000 Av = 25
12. UK Application Split For All Plastics
Others
18%
Medical
2% Packaging
38%
Transport
7%
Furn/House
7%
Electrical
6%
Construction
22%
14. UK Injection Moulding Industry
£10 m +
• 1,100 Injection
Moulders in the UK
5%
12%
• Machinery– 20,000
£5-10m
approx.
• No. Companies down
£1 – 5 m < £ 1m around 13% in last 5
57% years
• Total Turnover £2.8
26% billion approx.
16. Buyers Guides – www.buyersguides.co.uk
• Around 1000 of each
guide distributed p.a.
• Currently
– Additives
– Masterbatch
– Recyclers
– Moulders
– Packaging Companies
– Consultants
– Equipment
17.
18. • A History of Plastics
• A-Z of Additives
• A-Z of Polymers
• A-Z of Plastics Processors
• Plastics Translations
• Key Plastics Applications
19. The Importance of a Common Life Cycle Assessment
Methodology for Plastics
Webinar BusinessVibes of 21st September 2011
Patricia Vangheluwe, Guy Castelan
20. Outline
• Who we are
• Early starters
• Eco-Profiles & Environmental Product Declaration
• Environmental Footprint of Product
Webinar BusinessVibes of 21st 20
21. Who we are
• PlasticsEurope is one of the leading European trade associations with
centres in Brussels, Frankfurt, London, Madrid, Milan and Paris.
• We are networking with European and national plastics associations and have
more than 100 member companies, producing over 90% of all polymers
across the EU27 member states plus Norway, Switzerland, Croatia and
Turkey.
• The European plastics industry makes a significant contribution to the welfare
in Europe by enabling innovation, creating quality of life to citizens and
facilitating resource efficiency and climate protection.
• More than 1.6 million people are working in about 50.000 companies
(mainly small and medium sized companies in the converting sector) to create
a turnover in excess of 300 billion € per year.
• The plastics industry includes polymer producers - represented by
PlasticsEurope, converters - represented by EuPC and machine
manufacturers - represented by EUROMAP.
• For further info see the web links: www.plasticseurope.org
www.plasticsconverters.eu, www.euromap.org
Webinar BusinessVibes of 21st 21
22. A complex Industry Requires Common Methodology
Webinar BusinessVibes of 21st 22
23. Outline
• Who we are
• Early starters
• Eco-Profiles & Environmental Product Declaration
• Environmental Footprint of Product
Webinar BusinessVibes of 21st 23
24. PlasticsEurope Early Starters to Provide
Environmental Information About Plastics
1990 : Decided to develop Life Cycle Inventory (LCI) data-sets for
plastics materials Eco-profiles
1992 : Initial LCI methodology was developed
1993 : First Eco-profiles published
1995 : Workshop with various stakeholders methodology update
1999 : Eco-profiles available via the internet
2004 : Eco-profiles updated into current format including flow sheet
showing the integration of processes
2006 : Development of Product Category Rule for Environmental Product
Declarations
Webinar BusinessVibes of 21st 24
25. Outline
• Who we are
• Early starters
• Eco-Profiles & Environmental Product Declaration
• Environmental Footprint of Product
Webinar BusinessVibes of 21st 25
26. Eco-profiles
The Basis (‘foundation’)
• Inventory building blocks for LCA - cradle-to-gate
• European industry average data sets
• Covering the major proportion of European production
• Compiled by independent consultant
• Reliable and accurate data
• Updated ( depending on need and/or age)
• Freely available on our website
Eco-profiles — Life Cycle Inventory (LCI) Data
Tier • Fuel consumptions
• Raw material consumptions LCA
1 •
•
•
Air emissions
Aqueous emissions
Solid wastes
Experts
Webinar BusinessVibes of 21st 26
30. EPD’s
Product Category Rule for uncompounded
polymer resins to include the Impact
Assessment: the type III environm. label
Environmental Product Declarations (EPD) Metrics
Tier • Climate Change, GWP
Possible Additional Metrics
• Ozone Depletion, ODP
• Land Use
B2B
2 •
•
•
•
Acidification, AP
Nutrification, NP
Summer Smog, POCP
Resource Depletion
• Water
• Toxicity (Human, Eco)
Eco-profiles — Life Cycle Inventory (LCI) Data
Tier • Fuel consumptions
• Raw material consumptions LCA
1 •
•
•
Air emissions
Aqueous emissions
Solid wastes
Experts
Webinar BusinessVibes of 21st 30
31. Robust Eco-profile & EPD Procedure In Place
Programme Mgr
PlasticsEurope Qualified LCA
& Reviewer
& Member Co.s Consultant
(DEKRA)
Goal & Scope
Definition
Data Collection
Life Cycle
Modelling Facilitation
Inventory & Project Mgmt
Calculation
Process
Ownership Impact Calculation
& Working Group
Reporting
Review
Publication &
Database Mgmt
Webinar BusinessVibes of 21st 31
32. Eco-profile&EPD Development Strategy
System for program management
established DEKRA
• Major revision methodology document,
after external consultation.
• Working with several LCA consultants
Continous Update of Eco-profile in
place
Cooperation with EU JRC
• LCI data supplier (25 datasets) to the
European Platform on LCA (ELCD)
• Plan to integrate our data in the ILCD data
network External review
Cooperation with UNEP/SETAC LCA
initiative
Webinar BusinessVibes of 21st 32
33. Outline
• Who we are
• Early starters
• Eco-Profiles & Environmental Product Declaration
• Environmental Footprint of Product
Webinar BusinessVibes of 21st 33
34. Towards…
Tier …Environmental
Footprint of B2C*
3 Products
Environmental Product Declarations (EPD) Metrics
Tier • Climate Change, GWP
• Ozone Depletion, ODP Possible Additional Metrics
B2B
2 •
•
•
•
Acidification, AP
Nutrification, NP
Summer Smog, POCP
Resource Depletion
• Land Use
• Water
• Toxicity (Human, Eco)
Eco-profiles — Life Cycle Inventory (LCI) Data
Tier • Fuel consumptions
• Raw material consumptions LCA
1 •
•
•
Air emissions
Aqueous emissions
Solid wastes
Experts
* B2C: meant are the specifiers of consumer products, such as retailers
Webinar BusinessVibes of 21st 34
35. EU Pilot Project: Product and Corporate
Environmental Footprint
• DG Env & JRC issued a call for volunteers,
will commission a pilot study on the future
product and corporate environmental
footprint methodology
http://ec.europa.eu/environment/eussd/corpor
ate_footprint.htm
• PlasticsEurope set up a consortium of pilot
partners: BASF, Südpack, RDC Environment,
DEKRA Industrial, and ADEME (tbc) that was
selected
• Pilot tests runs July 2011 – Feb 2012.
• Consortium partners will learn about EU
footprint methodology, collect unique
experiences with a food packaging case
study, and assess the applicability of the
method.
Webinar BusinessVibes of 21st 35
36.
37. ( )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
THE ITALIAN
PLASTICS AND RUBBER
MACHINERY INDUSTRY
Mario Maggiani
D.37
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
38. (SINCE 1960 )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
ASSOCOMAPLAST
• is a private organisation
that since 50 years
has been promoting
the made-in-Italy
plastics & rubber technologies
• has about 170 Members
• joins the Federation of Italian
industries (CONFINDUSTRIA)
and EUROMAP (Europe’s
Association for Plastics and
Rubber Machinery Manufacturers).
D.38
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
39. (OUT ACTIVITY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
PROMAPLAST
• organizes the second largest
trade show in Europe.
In 2009, PLAST hosted
1.478 exhibitors
and 55.175 visitors.
Next event is scheduled
from May 8 to 12, 2012
• manages a training
technical assistance center
for Italian and foreign
plastics converters.
D.39 D.39
www.assocomaplast.org
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
40. (OUR TECHNICAL MAGAZINE )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
PROMAPLAST publishes:
technical magazine mailed
to 8,000 Italian
plastics and rubber converters
(it has the widest national circulation)
NEWS FOR THE PLASTICS AND RUBBER INDUSTRY
WEEKLY E-NEWS FOR THE PLASTICS AND RUBBER INDUSTRY
D.40 D.40
www.assocomaplast.org
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
41. (ACTIVITY PROGRAM )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
• promotion of the Made in Italy
• exhibitions, in Italy and abroad
• market researches
• technical and commercial support
to plastics and rubber
machinery manufacturers.
D.41 D.41
www.assocomaplast.org
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
42. (NOT ONLY FASHION AND DESIGN )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Italy not only is the best
in fashion and design…
From the end of the Fifties,
Italian plastics and rubber machinery
manufacturers
have been steadily at the top
of the world ranking in this field
with a share of about 13%
out of the production value.
D.42
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
43. (MACHINERY MADE IN ITALY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Italian machinery manufacturers -
which actually hold about 600
patents concerning plastics &
rubber machinery and auxiliaries -
offer a fully integrated approach to
the customers for meeting
individual requirement
with reference to energy efficiency,
to lower life time costs
and environmental impact
drastically.
COMERIO ERCOLE
D.43
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
44. (MACHINERY MADE IN ITALY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Experience, innovation, efficiency,
quality and safety
are offered by Italian machinery
and original spare parts.
SIPA
D.44
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
45. (WORLDWIDE MACHINERY EXPORT )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
EXPORT TOTAL SHARES IN TOTAL (%)
YEAR (million euro
core machinery) D J I USA CHINA
2005 13,725 27.2 15.1 10.8 6.1 3.2
2006 14,341 25.0 12.9 10.7 7.0 5.8
2007 15,260 25.0 10.9 12.3 6.5 6.9
2008 15,037 26.5 11.2 11.7 5.9 8.6
2009 10,811 24.4 10.7 11.2 7.5 9.0
D.45
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
47. (ITALIAN MACHINERY EXPORT )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
(%) 2008 2009 2010
Europe 61.3 62.7 57.2
- EU 45.7 47.7 45.5
North America/Nafta 9.6 8.0 9.4
Central/South America 6.8 7.7 10.2
Africa 4.6 5.6 5.2
Asia/Oceania 17.7 16.0 18.0
TOTAL 100.0 100.0 100.0
D.47
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
48. (TOP TEN MARKETS )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
2008 % 2009 % 2010 % 2011 %
(January/June)
Germany 12.6 Germany 15.4 Germany 15.4 Germany 14.9
Russia 8.9 France 6.7 China 6.5 France 6.7
France 6.7 Russia 6.2 France 5.9 China 6.2
USA 5.4 China 4.6 USA 5.6 USA 5.5
Poland 4.8 Spain 4.6 Brasil 4.9 Poland 5.0
China 4.5 USA 4.4 Russia 4.7 Brazil 4.4
Spain 4.5 Poland 3.9 Spain 4.3 Russia 3.8
Mexico 3.0 Turkey 3.7 Poland 3.8 Spain 3.7
Brasil 3.0 Benelux 3.2 Turkey 3.6 Turkey 3.7
Turkey 2.9 Brasil 3.0 Benelux 3.4 UK 3.0
others 43.7 others 44.3 others 41.9 others 43.1
TOTAL 100.0 TOTAL 100.0 TOTAL 100.0 100.0
D.48
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
49. (SENTIMENT SURVEY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Forecast of turnover trend in July-December 2011
(compared to January-June 2011)
100%
90%
80%
70%
60%
50%
40%
30%
32% 50%
20%
10%
0% 18%
Increasing steady decreasing
D.49
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
50. (SENTIMENT SURVEY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Order collection in August 2011
(compared to July 2011)
21% 9%
34%
36%
Increasing Steady Decreasing Sharp decrease
D.50
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
51. (SENTIMENT SURVEY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Top five destination countries
of the Italian sector export
(in August 2011)
13.8%
6.5%
6.5%
59.4% 6.5%
5.8%
Germany United States Russia China Turkey other countries
D.51
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
52. (ITALIAN ORIGINALITY )
WEB SEMINAR(September 21, 2011)
SPEAKER: Mario Maggiani
Thank you!
For more information:
e-mail: info@assocomaplast.org
telefax: +39 02 57512490
www.assocomaplast.org
D.52 D.52
www.assocomaplast.org
Assocomaplast - Centro Direzionale Milanofiori - Palazzo F/3 - 20090 Assago - Milan - Italy - tel +39 02 8228371 - fax +39 02 57512490 - e-mail: info@assocomaplast.org – www.assocomaplast.org
53. SECOND FRONTIER OF SUSTAINABILITY
IN RUBBER INDUSTRY: MALAYSIA
ONLINE NETWORKING EVENT BY
BUSINESSVIBES
DATUK DR SALMIAH AHMAD
Director General
Malaysian Rubber Board
54. Malaysian Malaysian
Rubber Rubber Rubber
Research Research Exchange Rubber Research
Institute of and and Institute of
Malaysia Developme Licensing Malaysia is one of
(RRIM) nt Board Board the 3 organizations
(MRRDB) (MRELB) merged to form
MRB. RRIM was
founded in 1925.
MRB therefore has
been involved in
R&D activities for
Put Logo LGM more than 85
years.
The findings of
R&D activities are
adopted by the
Put Picture industry and this
ensures the
of Rubber
continued
Product Put Logo
relevance or
SMR sustainability of the
industry to the
economic growth
of the country.
55. SUSTAINABLE DEVELOPMENT
Sustainability is not only about environmental
sustainability But to achieve a
balance, interdependent and mutually reinforcing
economic, social and environmental aspects
Sustainable Development – Social
Definition (People)
• “Development seeking to meet
the need of the present
generation without
compromising the ability of
future generations to meet
Environment Economy
their own needs” (Brundtland (Planet) (Profit)
Commission,1987)
PERFORMANCE
56. SMALLHOLDERS
ENJOYING
BETTER INCOME
Income of FELDA settlers planting
rubber
Felda Settlers holding size 4ha,
Independent Smallholders holding Size 2.3 ha,
Productivity 1,500 kg/ha
Income SMR 20
2010
(RM) (sen/kg)
Jan 2,504.90 994.38
Feb 2,538.43 1,010.13
Mac 2,608.41 1,038.00
Apr 2,646.32 1,045.55
May 2,263.49 919.60
Jun 2,330.17 932.45
Jul 2,316.69 915.00
Ogos 2,373.11 955.40
Sep 2,542.38 1,033.84
Oct 2,892.70 1,155.45
Nov 3,194.11 1,283.55
56
Dec 3,725.00 1,415.69
PERFORMANCE
57. DIVERSIFIED DOWNSTREAM ACTIVITIES
China
Area Export
1.02 mil
ha Cuplump SMR ROW*
Compounded Export China
Production Rubber
Dry Rubber ROW*
Goods
Latex
Gloves
Latex Latex B.G
80%
Latex Others
Export 20%
Imports
Dry
Rubber
Total Capacity ENHANCED
1,500,000 tonne TRADE
Note : * Rest of the World
58. NO DETRIMENTAL EFFECT TO
ENVIRONMENT EVEN AFTER >100 YEARS
Environmental Management in Rubber Industry
Appropriated regulatory measures in plac
(Environmental Quality Act (1979) in Malaysia)
Established technologies for
• effluent treatment,
• air pollution and sludge treatment and
• disposal
sufficient to minimize environmental impact of rubber industry
Other good features of natural rubber
Natural Rubber is inherently environmentally friendly (compared to
synthetic rubber)
Positive Carbon Foot Print - 17,333 kg of CO2 is sesquertered/asborbed
during the production of 1.2 tonne of SMR – reduce green house gases.
PERFORMANC
59. The current Prime
Minister of Malaysia
wishes Malaysia to
move from medium
income to high income
economy. Can rubber
fit into this new
strategic direction of
the country? Especially
in Malaysia, where the
plants are 95%
owned by smallholders,
the trees are also
old and
some percentage of
the acreage has been
converted to oil palm
Criteria for Entry Point Projects (EPPs) where it is not easy to
reverse the situation.
1. GNI contribution 2. Job creation 3.Private sector
driven
60. The 4 EPP are estimated to contribute GNI of
RM 52.9 billion in 2020
GNI Impact, RM billion
6.0 52.9
Incremental GNI
Contribution 20.75
~ RM 34.4Billion
RM 34.4 billion
2009 (current) Upstream Growth of Introduction Baseline 2020 GNI
developments existing of new Growth
downstream downstream
products products
PERFORMANCE
61. R&D To Spearheading the Second Frontier of
Sustainability (Optimization of Resources
Utilization)
SECTORS Optimization of Environmental Technological Institutiona
resources Impacts development l changes
UP Clones with GAP Water- SMH-
STREAM higher productivity Bio-fertilizer based Cooperative
Traceability stimulants s
Automation
MID Recover high- Recover Use better
STREAM value minor minor drying Integration
components components techniques of upstream
Enforce high and recycle and
quality cup-lumps water midstream
or latex Ekoprena/ (IPC)
Pureprena
DOWN Enhance Use • Low Carbon
STREAM performance additives from energy Foot Print
62. SECOND FRONTIER OF SUSTAINABILITY :
EXAMPLE 1
Automatic Rubber Tapping System -
ARTS
TAPPING
ARTS - Is supposed to automatically tap
rubber trees at pre-determined time and
the latex is pumped to a collection
centre.
LATEX
Old rubber trees are also supposed to be
replanted with higher yielding clones
LATEX CONC
such as RRIM 3001 where the potential
yield is 3tonne/ha/year in contrast to
current 1.5tonne/ha/year.
ARTS will also address the issues of
Labour – it reduce labour
requirement (+ foreign labour) PRODUCTS
Shortage of latex - Produce more
latex
DISPOSAL
Reduce the physical burden
especially to ageing smallholders –
ARTS is equipped with collection
PERFORMANCE
system
63. SECOND FRONTIER OF SUSTAINABILITY : EXAMPLE 2
Integrated Processing Center - IPC
Co-products in the process are
processed into pharmaceutical
products value addition and TAPPING
reduce waste or recycle
processed water.
Land required for effluent
treatment reduced. LATEX
Reduce cost
IPC will also:-
Raw material to finished products LATEX CONC
give better return to
smallholders
Later, the wood can be integrated
With the advancement in PRODUCTS
biotechnology, the rubber trees
may be genetically modified to
produce pharmaceutical products
or latex for very specific DISPOSAL
application.
PERFORMANCE
64. SECOND FRONTIER OF SUSTAINABILITY :
EXAMPLE 3
Ekoprena n Pureprena TAPPING
Increase the
functionality on rubber
in order to enhance
LATEX
performances (value
addition)
But the LCIA of the
EKOPRENA/PUREPRENA
epoxidation process
need to be evaluated
Raw material for the
PRODUCTS
production of “green
products”
The product will have
DISPOSAL
better Carbon Foot
Print
PERFORMANCE
65. CONCLUSION
• The Sustainability of the Natural Rubber Industry
• Based on the acceptable definition of sustainability this paper demonstrated
qualitatively (semi quantitatively) the sustainability of the rubber industry
1 based on the impact on people, profit and planet (environment) after more
than 100years involvement.
• More Efficient Uses of Resources
• There are of course areas that can be improved. Using a LCIA tools and based
on knowledge gained through R&D, we realized there is a need to improve on
the effectiveness in utilizing resource. We now realized basic resources such as
water, air, land and materials need to be utilized more effectively. By
improving or increasing our effectiveness in using resources we will not only
2 reduce negative impact of our activities on environment but may also improve
profitability and competitiveness.
• Spearheading the Second Frontier of Sustainability
• Defining effective utilization of resources as the second frontier of
sustainability, MRB is spearheading the R&D activities in this area. Some of the
examples were highlighted which include:
• ARTS – which help to increase the production of latex and reduce labour,
3
• Recovery of what used to be waste as “pharmaceutical” product – which
help to increase value and reduce waste for treatment and
• New green product
PERFORMANCE
68. What is BusinessVibes?
BusinessVibes is a global B2B
networking platform which
allows companies to find and
connect to prospective business
partners while learning more about
their industry.
BusinessVibes connects
businesses, associations, and
events.
69. BusinessVibes allows businesses to:
► Create profiles to increase
exposure on and
off the network
►Search and Connect with
potential business
partners abroad (clients, suppliers, JV
partners, etc.)
►Find and join associations to
get advice,
referrals, and support industry causes
►Learn about new markets,
industry news, and
upcoming events
70. What’s New On BusinessVibes?
New version is coming out soon;
Discount offers from our partner event planners to those
who sign up through BusinessVibes.
71. Message for the participants
Thank you very much for participating in our webinar!
For the latest news, and information on upcoming
webinars log on to www.businessvibes.com.