PLA LAYER GOLD 1 COLOUR
•
0 likes•308 views
This document provides information on a filament testing project. It specifies that the object created is not for sale and any unauthorized copying is prohibited. The filament being tested is PLA LAYER GOLD 1 COLOUR.
Report
Share
Report
Share
Recommended
triboPA 3D Printing Filament
The document describes a new triboPA filament material for 3D printers that contains molybdenum bisulfide for high friction and abrasion resistance. It has a coefficient of friction of 0.30-0.28 and properties including tensile strength of 75 MPa, elongation of 40%, and flexural modulus of 2800 MPa. Printing parameters are listed for FFF printers using a 0.5mm nozzle at 260C with a 180-190C heated bed. Images show the material can be printed and milled with no warping.
Birds, Bats and Beyond. What’s that got to do with Water? - Nick Elderfield (...
2015 DHI UK & Ireland Symposium
Birds, Bats and Beyond – What’s that got to do with Water?
Nick Elderfield (DHI),
Tuesday 21 April 2015 at 12:40 - 13:00
Innovation in modelling water environments is what DHI has been about for over 50 years. A detailed understanding of the controlling physical conditions, coupled with a behavioural knowledge of critical species dependant on the water environment, provides a scientifically robust approach to assessing historic and future change spatially and temporally. Our habitat modelling approach has been successfully applied on a number of projects in the UK and the wider North Sea region, combining expertise in water environments with the critical issues for today’s projects. Models always rely on data and, to this end, DHI have developed sensing technologies from low cost, web-ready devices to integrated observation systems for birds and mammals.
Leaders Vs Managers
The document contrasts the roles and characteristics of managers versus leaders. It lists over 50 bullet points describing how managers tend to be more production and system oriented, focusing on short-term goals and compliance, while leaders are more people oriented, inspiring long-term vision and change. Managers delegate responsibility while leaders delegate authority. Overall, the document frames managers as maintaining the status quo while leaders innovate and challenge the existing system.
Dhi uk 2015 - marine - eco lab up close and personal - secured
2015 DHI UK & Ireland Symposium
Training seminars
Wednesday 22 April 2015
ECO Lab – Up Close and Personal
General introduction to ECO Lab - DHI’s environmental modelling system (Michael Potthoff, DHI Denmark)
PLA DISSOLVED INTO NOT DANGEROUS LIQUID
This document discusses dissolving PLA plastic into a liquid. It notes that PLA can be dissolved into a liquid that is not dangerous. The document is confidential and unauthorized copying is not permitted.
Next Gen OER Keynote Panel - Open Ed 2016
Invite students to co-design content for a win-win-win-win. Students win by creating a legacy an contributing to the collective. The content wins by going through a revision process. Teachers win by having students produce content they may not have time to create themselves. But most of all, the students taking the course have additional pedagogical options, such as audio, presentations, tutorials, FAQs sheets, contextual cues, project ideas, and more. Learn more about the paradox of selflessness and how heaven = sharing.
Integrated Water Management
Approaches to Integrated Water Management – Case Stories of Applied Solutions.
Presented by Torsten Jacobsen, Hydrologist (MSc, PhD), Water Resources Department, DHI.
ESI Annual Conference – Wednesday 20th June 2012.
'Applying carbon capture and storage to a Chinese steel plant.' Feasibility s...
'Applying carbon capture and storage to a Chinese steel plant.' Feasibility s...Global CCS Institute
The Global CCS Institute has recently published a feasibility study report on applying carbon capture and storage (CCS) to a steel plant in China. Toshiba was commissioned to conduct the study in collaboration with Chinese corporations.
The feasibility suggests that carbon capture in Chinese steel plants is a cost effective means of reducing carbon emissions compared with similar plants around the world. In this webinar, Toshiba presented on the major findings of this feasibility study. Recommended
triboPA 3D Printing Filament
The document describes a new triboPA filament material for 3D printers that contains molybdenum bisulfide for high friction and abrasion resistance. It has a coefficient of friction of 0.30-0.28 and properties including tensile strength of 75 MPa, elongation of 40%, and flexural modulus of 2800 MPa. Printing parameters are listed for FFF printers using a 0.5mm nozzle at 260C with a 180-190C heated bed. Images show the material can be printed and milled with no warping.
Birds, Bats and Beyond. What’s that got to do with Water? - Nick Elderfield (...
2015 DHI UK & Ireland Symposium
Birds, Bats and Beyond – What’s that got to do with Water?
Nick Elderfield (DHI),
Tuesday 21 April 2015 at 12:40 - 13:00
Innovation in modelling water environments is what DHI has been about for over 50 years. A detailed understanding of the controlling physical conditions, coupled with a behavioural knowledge of critical species dependant on the water environment, provides a scientifically robust approach to assessing historic and future change spatially and temporally. Our habitat modelling approach has been successfully applied on a number of projects in the UK and the wider North Sea region, combining expertise in water environments with the critical issues for today’s projects. Models always rely on data and, to this end, DHI have developed sensing technologies from low cost, web-ready devices to integrated observation systems for birds and mammals.
Leaders Vs Managers
The document contrasts the roles and characteristics of managers versus leaders. It lists over 50 bullet points describing how managers tend to be more production and system oriented, focusing on short-term goals and compliance, while leaders are more people oriented, inspiring long-term vision and change. Managers delegate responsibility while leaders delegate authority. Overall, the document frames managers as maintaining the status quo while leaders innovate and challenge the existing system.
Dhi uk 2015 - marine - eco lab up close and personal - secured
2015 DHI UK & Ireland Symposium
Training seminars
Wednesday 22 April 2015
ECO Lab – Up Close and Personal
General introduction to ECO Lab - DHI’s environmental modelling system (Michael Potthoff, DHI Denmark)
PLA DISSOLVED INTO NOT DANGEROUS LIQUID
This document discusses dissolving PLA plastic into a liquid. It notes that PLA can be dissolved into a liquid that is not dangerous. The document is confidential and unauthorized copying is not permitted.
Next Gen OER Keynote Panel - Open Ed 2016
Invite students to co-design content for a win-win-win-win. Students win by creating a legacy an contributing to the collective. The content wins by going through a revision process. Teachers win by having students produce content they may not have time to create themselves. But most of all, the students taking the course have additional pedagogical options, such as audio, presentations, tutorials, FAQs sheets, contextual cues, project ideas, and more. Learn more about the paradox of selflessness and how heaven = sharing.
Integrated Water Management
Approaches to Integrated Water Management – Case Stories of Applied Solutions.
Presented by Torsten Jacobsen, Hydrologist (MSc, PhD), Water Resources Department, DHI.
ESI Annual Conference – Wednesday 20th June 2012.
'Applying carbon capture and storage to a Chinese steel plant.' Feasibility s...
'Applying carbon capture and storage to a Chinese steel plant.' Feasibility s...Global CCS Institute
The Global CCS Institute has recently published a feasibility study report on applying carbon capture and storage (CCS) to a steel plant in China. Toshiba was commissioned to conduct the study in collaboration with Chinese corporations.
The feasibility suggests that carbon capture in Chinese steel plants is a cost effective means of reducing carbon emissions compared with similar plants around the world. In this webinar, Toshiba presented on the major findings of this feasibility study. CCS as least-cost options for integrating intermittent renewables in low-carb...
CCS as least-cost options for integrating intermittent renewables in low-carb...Global CCS Institute
Intermittent renewable energy sources (intermittent‐RES) such as wind and solar PV can be a key component of the resulting low‐ carbon power systems, but their intermittency requires more flexibility from the rest of the power system to maintain system stability. In this study, the efficacy of five complementary options to integrate intermittent RES at the lowest cost is evaluated with the PLEXOS hourly power system simulation tool for Western Europe in the year 2050. Outcomes of the study show that amongst the various options to reduce system’s costs one of the most effective is the implementation of CCS at natural gas‐fired power plants.
In this webinar, Machteld van den Broek, Assistant Professor at the Utrecht University, and Anne Sjoerd Brouwer, PhD student at the Utrecht University, presented the method and the results of the study.
3 d printed woman heel shoe (three material) kt
Woman Heel Shoe
three material printed with only one extruder.
Two hard material, one soft rubber for sole application
3D printing petg filament bottle st
This document describes a 3D printing PETG filament bottle. The object is not for sale and is only for testing filament. Unauthorized copying of the object is not permitted.
3D printing PETG filament bottle st
This document describes a 3D printing PETG filament bottle. The bottle is not for sale and is only intended for filament testing purposes. Unauthorized copying of the bottle design is prohibited according to the copyright notice.
Allergisten rokottaminen
THL:n asiantuntijalääkäri Ulpu Elonsalon esitys rokotusaiheisessa verkkokoulutuksessa 27.10.2016. Aiheena allergisten rokottaminen.
Overview on capture technologies
Presentation by Ron Munson, Global CCS Institute at the 2015 CCUS Workshop on CO2 Storage, January 22 at the University of Sonora, Hermosillo
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
More Related Content
Viewers also liked
CCS as least-cost options for integrating intermittent renewables in low-carb...
CCS as least-cost options for integrating intermittent renewables in low-carb...Global CCS Institute
Intermittent renewable energy sources (intermittent‐RES) such as wind and solar PV can be a key component of the resulting low‐ carbon power systems, but their intermittency requires more flexibility from the rest of the power system to maintain system stability. In this study, the efficacy of five complementary options to integrate intermittent RES at the lowest cost is evaluated with the PLEXOS hourly power system simulation tool for Western Europe in the year 2050. Outcomes of the study show that amongst the various options to reduce system’s costs one of the most effective is the implementation of CCS at natural gas‐fired power plants.
In this webinar, Machteld van den Broek, Assistant Professor at the Utrecht University, and Anne Sjoerd Brouwer, PhD student at the Utrecht University, presented the method and the results of the study.
3 d printed woman heel shoe (three material) kt
Woman Heel Shoe
three material printed with only one extruder.
Two hard material, one soft rubber for sole application
3D printing petg filament bottle st
This document describes a 3D printing PETG filament bottle. The object is not for sale and is only for testing filament. Unauthorized copying of the object is not permitted.
3D printing PETG filament bottle st
This document describes a 3D printing PETG filament bottle. The bottle is not for sale and is only intended for filament testing purposes. Unauthorized copying of the bottle design is prohibited according to the copyright notice.
Allergisten rokottaminen
THL:n asiantuntijalääkäri Ulpu Elonsalon esitys rokotusaiheisessa verkkokoulutuksessa 27.10.2016. Aiheena allergisten rokottaminen.
Overview on capture technologies
Presentation by Ron Munson, Global CCS Institute at the 2015 CCUS Workshop on CO2 Storage, January 22 at the University of Sonora, Hermosillo
Viewers also liked (7)
CCS as least-cost options for integrating intermittent renewables in low-carb...
CCS as least-cost options for integrating intermittent renewables in low-carb...
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Recently uploaded
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Recently uploaded (20)
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
PLA LAYER GOLD 1 COLOUR
- 1. © Copyright Keytech S.r.l. 24/11/2015 Object not for sell, only filament testing, unauthorized copying PLA LAYER GOLD 1 COLOUR