This document is a project report submitted in partial fulfillment of the Bachelor of Engineering degree in Electronics and Communication Engineering at Visvesvaraya Technological University. The project aims to develop an E-Assistance system for elderly and disabled individuals using a microcontroller-based hardware system. The system will include sensors to monitor temperature, light levels, gas leaks and smoke and will control home appliances like lights and fans based on the sensor values. It will also include a voice recognition module and GSM module to allow voice control of appliances and send SMS alerts in case of emergencies like gas or smoke detection.
This document is a project report submitted by three students - Ashwani Kumar, Ankit Raj, and Anand Abhishek - to Cochin University of Science & Technology in partial fulfillment of the requirements for a Bachelor of Technology degree in Information Technology. The report describes the development of a "Know Your Teacher" mobile application that uses ultrasonic sensors and an Arduino board to detect when a faculty member is present in their office and notify students via the mobile app in real-time. It details the hardware components used, including the ultrasonic sensor, Arduino Uno, piezoelectric buzzer, Arduino Wi-Fi 101, as well as the software specifications and coding implemented in Arduino IDE
This document is a project report for a water tank level detector created by four students as a partial fulfillment for their Bachelor of Technology degree. It includes sections on the introduction, previous work, problem areas, their contributions, and project details. The project uses various components like a PIC16F88 microcontroller, MPX2010DP pressure sensor, LM335 temperature sensor, operational amplifier LM324, and 433MHz RF transmitter to detect the water level in a tank and transmit it wirelessly over long ranges. It aims to provide an easy and fast way to measure water levels for industrial and home applications.
This document describes a project report for a door knock alarm with timer circuit. It includes an abstract, introduction, theory/principle, circuit analysis, PCB analysis, assembly and testing, working of the circuit, expectations and achievements, project cost, component details, shortcomings and future applications. The circuit uses a piezoelectric sensor to detect door knocks, which triggers a NE555 timer IC to enable a melody generator IC for a set period of time. The music plays through a speaker. The time period can be adjusted with a variable resistor. The project aims to develop a low-cost circuit to alert users when someone knocks on the door.
This document provides guidance for writing journal articles. It discusses key components of an academic journal article such as the background topic, research methods, results, and conclusions. It also notes some of the challenges of writing articles in a different language than one's thesis. The overall document serves as a guide for structuring and developing the various elements of a quality journal article.
IEEE College of Technology MAES SE 2020 - Coding FunMadelenReyes
The document summarizes a presentation by IEEE at the University of Houston on coding and how it can be fun. It discusses how coding involves problem solving by breaking problems down into simple instructions for computers. It then provides an example of coding an autonomous car to park safely using ultrasonic sensors and LEDs to indicate the car's status. The document outlines the logic and code used to check the distance and determine which LEDs to turn on. It emphasizes that coding is an important STEM skill that can be applied to solve real-world problems.
This document is a project report submitted in partial fulfillment of the Bachelor of Engineering degree in Electronics and Communication Engineering at Visvesvaraya Technological University. The project aims to develop an E-Assistance system for elderly and disabled individuals using a microcontroller-based hardware system. The system will include sensors to monitor temperature, light levels, gas leaks and smoke and will control home appliances like lights and fans based on the sensor values. It will also include a voice recognition module and GSM module to allow voice control of appliances and send SMS alerts in case of emergencies like gas or smoke detection.
This document is a project report submitted by three students - Ashwani Kumar, Ankit Raj, and Anand Abhishek - to Cochin University of Science & Technology in partial fulfillment of the requirements for a Bachelor of Technology degree in Information Technology. The report describes the development of a "Know Your Teacher" mobile application that uses ultrasonic sensors and an Arduino board to detect when a faculty member is present in their office and notify students via the mobile app in real-time. It details the hardware components used, including the ultrasonic sensor, Arduino Uno, piezoelectric buzzer, Arduino Wi-Fi 101, as well as the software specifications and coding implemented in Arduino IDE
This document is a project report for a water tank level detector created by four students as a partial fulfillment for their Bachelor of Technology degree. It includes sections on the introduction, previous work, problem areas, their contributions, and project details. The project uses various components like a PIC16F88 microcontroller, MPX2010DP pressure sensor, LM335 temperature sensor, operational amplifier LM324, and 433MHz RF transmitter to detect the water level in a tank and transmit it wirelessly over long ranges. It aims to provide an easy and fast way to measure water levels for industrial and home applications.
This document describes a project report for a door knock alarm with timer circuit. It includes an abstract, introduction, theory/principle, circuit analysis, PCB analysis, assembly and testing, working of the circuit, expectations and achievements, project cost, component details, shortcomings and future applications. The circuit uses a piezoelectric sensor to detect door knocks, which triggers a NE555 timer IC to enable a melody generator IC for a set period of time. The music plays through a speaker. The time period can be adjusted with a variable resistor. The project aims to develop a low-cost circuit to alert users when someone knocks on the door.
This document provides guidance for writing journal articles. It discusses key components of an academic journal article such as the background topic, research methods, results, and conclusions. It also notes some of the challenges of writing articles in a different language than one's thesis. The overall document serves as a guide for structuring and developing the various elements of a quality journal article.
IEEE College of Technology MAES SE 2020 - Coding FunMadelenReyes
The document summarizes a presentation by IEEE at the University of Houston on coding and how it can be fun. It discusses how coding involves problem solving by breaking problems down into simple instructions for computers. It then provides an example of coding an autonomous car to park safely using ultrasonic sensors and LEDs to indicate the car's status. The document outlines the logic and code used to check the distance and determine which LEDs to turn on. It emphasizes that coding is an important STEM skill that can be applied to solve real-world problems.
Slides of the presentation given at ICSE 2010 (http://www.sbs.co.za/ICSE2010/) on the paper (http://www.inf.usi.ch/faculty/lanza/Downloads/Bacc2010b.pdf).
This document is Gilbert Haro's digital resume and portfolio. It includes an introduction, details of his education at DeVry including courses and grades, work experience, recommendations, and work samples. The portfolio is organized with a table of contents and includes sections on his educational background, career goals, and qualifications for electrical engineering roles.
Minor project report format for 2018 2019 finalShrikantkumar21
The document describes a smart bulletin platform project submitted by Shrikant Singh and Nikita Shanker in partial fulfillment of the requirements for a Bachelor of Technology degree. The project aims to develop an examination seating arrangement system to computerize the traditional exam process and automatically generate seating arrangement reports. The system will allocate exam halls and seats to students based on their department, year, section, and other details. This is intended to make the exam process more efficient and reduce manual work.
This document provides an introduction to an Arduino starter kit, including what is included in the kit and how to use the included book to learn about the Arduino hardware, software, and programming. The kit contains an Arduino Uno board, sensors, displays, and other components. The book guides the user through 16 projects of increasing complexity to teach Arduino skills. It assumes no prior knowledge and provides step-by-step instructions and diagrams to help users build each project and understand how the code and hardware work together.
This project involves designing and developing a wireless, microcontroller-based humanoid arm with a five-fingered hand. Solidworks was used to design the mechanical components of the hand to resemble a human hand. Analysis was performed to ensure design specifications such as weight and cost were met. The hand will be 3D printed based on CAM codes generated in NX-CAM. An Arduino microcontroller board will enable wireless control of servo motors in the hand using a sensor-equipped control glove. The goal is to create a low-cost, biologically inspired robotic hand for applications such as bomb disposal, prosthetics and surgery.
This document is an assignment submission for an introduction to physical computing and programming course. It includes a summary of the student's personal project to create an electronic bird feeder. The project requirements are outlined, along with reflections on concepts and techniques learned through the project such as component selection, CAD design, coding, and debugging. Technical problems encountered and solutions are also discussed.
Noise has always been unwanted and undesirable, so the need for noise removal or cancellation comes into the picture. It involves removing the undesirable noise providing the source sound as output. The method of removing the noise is classified as passive noise reduction and active noise cancellation. The former uses the sound absorbing material to block the incoming noise, and the latter uses an adaptive algorithm to synthesize the anti-noise so as to cancel the noise through destructive interference. The project work is aimed at understanding the various noise cancellation techniques and to design a real-time system which helps in removing or minimizing the effect of
noise. There are different algorithms for cancellation of noise, here some algorithms are mentioned and the project is carried out with Least Mean Square (LMS) Algorithm. It involves both hardware implementation and software simulation. The software environment uses MATLAB Simulink environment to design the noise cancellation system and the hardware or real-time implementation is done using Texas Instrument (TI) DSK6713 which is basically a DSP processor, used to interface the programming environment with the real-time environment. The program for noise cancellation is written in Code Composer Studio v5.4.0 which is an Integral Development Environment to develop applications for TI Embedded Systems. The algorithm for Noise Cancellation focuses on Adaptive Filters which have the capability to change their transfer function by adjusting their weight coefficients to get the desired noise free signal.
Keywords: Active Noise Cancellation, Least Mean Square Algorithm, Adaptive Filters, TI DSK6713, Code Composer Studio
Robotic hand prototype as a didactic model.IRJET Journal
This document describes the development of a robotic hand prototype designed to be used as a didactic (teaching) model for students. The prototype was designed using 3D CAD software and 3D printed. It is controlled using an ATmega 328P microcontroller and flex sensors to read finger positions and servo motors to drive finger movement. The prototype was tested with students through classroom lessons focusing on electronics, microcontrollers, programming and robotics concepts. Students then programmed a binary counting sequence using the hand. The prototype was able to execute the programmed sequence but some fingers had slower movement times than desired due to the weight and flexibility of the 3D printed material. The robotic hand prototype was intended to motivate students and support their learning of robotics
Quick slide show demonstrating early investigation into patches, how i learnt construction and vital elements inside patching in Pure Data before my first patch build.
This document describes a microcontroller-based library gateway management system project submitted for a degree in electrical and computer engineering. It involves using infrared sensors and a microcontroller to count the number of people entering and exiting the library and communicate this data to a computer at the entrance. The computer will display the available chair count and book availability information to assist the guard in informing users. The project aims to better manage the library gateway and reduce user stress and time wasted. It proposes using a PIC microcontroller, infrared sensors, serial communication, and a visual basic application to achieve this goal.
A Facial Expression Recognition System A Project ReportAllison Thompson
This document is a project report submitted to Kathford International College of Engineering and Management for a Facial Expression Recognition System project. It was created by four students - Nalina Matang, Shreejana Sunuwar, Sunny Shrestha, and Sushmita Parajuli - under the supervision of Ashok Kumar Pant. The report describes the background, objectives, methodology, results and conclusions of the project to develop a system that can recognize facial expressions using image processing and machine learning techniques.
Electrónica: Diseño y construcción de un prototipo programable orientado la a...SANTIAGO PABLO ALBERTO
This document presents the design and construction of a programmable prototype for applying digital signal processing algorithms to audio signals. The project aims to address a lack of practical experience with digital filtering in an electronics program. It involves designing stages to meet requirements, building a circuit board, and implementing FIR and IIR filtering algorithms on a microcontroller. Testing confirms the prototype successfully applies digital filtering in real time. The project provides hands-on experience with digital signal concepts and design methodology.
cs4414: Operating Systems
http://rust-class.org/class-1-what-is-an-operating-system.html
Class 1: What is an Operating System?
Why so many programming languages?
Introducing Rust
The Revolution in an Industry That Will Change The World (Test & Measurement)Initial State
The document discusses how the test and measurement industry will revolutionize product development through embedded instrumentation and connected devices. It argues that embedded instruments inside integrated circuits will allow engineers to instantly access hardware signals and software events within products. Additionally, connecting products to the internet will enable remote debugging from anywhere. This will significantly speed up new product development and improve tools to accelerate technological progress. The financial and global impacts of these changes will be profound as industries are disrupted and new markets emerge.
This report provides an overview of speech recognition technology, including how speech recognition systems work, common applications, and future uses. It discusses key concepts such as utterances, pronunciation, grammar, accuracy, and training. The report also examines speech recognition software and provides examples of free and commercial speech recognition programs. Overall, the report finds that speech recognition has various applications in fields like education, healthcare, gaming, and more, and the technology is expected to continue advancing to support additional future applications.
This document provides an overview of an internship report submitted by Vishal Garg about embedded system development using an Arduino Uno. It includes chapters on introducing the project aims and methodology, a literature review on embedded systems, details about the Arduino Uno board and its programming, examples of programming projects completed, and conclusions from the internship. Tables of contents and figures are provided listing the different chapters, figures, tables, and photographs included in the report.
Los controladores lógicos programables en busca del desarrollo económico en l...KevinCando5
This document presents a research project investigating how programmable logic controllers (PLCs) can promote economic development in homes and productivity in Ecuadorian businesses through automation. The project aims to study homes and businesses in Pichincha province, specifically Cayambe canton, to demonstrate how PLCs and automation can generate savings, increase productivity, and help the environment. The document outlines the context, justification, objectives, methodology, administration, timeline and references that will be used for the research project.
The document describes a project submitted by 4 students to fulfill the requirements for a Bachelor of Technology degree, focusing on developing a voice operated robot under the supervision of Loknath Reddy. It includes certificates, declarations, acknowledgements and an abstract describing the robot's ability to perform functions through voice commands by interpreting human language and converting it to machine commands.
The document provides an overview of the CS101 Introduction to Computing course. It discusses the course objectives to build an appreciation of fundamental computing concepts, proficiency in productivity software, and beginner web development skills. The course structure is outlined, covering these topics over 15 weeks through lectures, readings, and assignments culminating in a midterm and final exam. Assessment is based on assignments, a midterm exam, and a final exam. Key figures in early computing history and capabilities of modern computers are also introduced.
IRJET - Speech to Speech Translation using Encoder Decoder ArchitectureIRJET Journal
This document summarizes a research paper on speech-to-speech translation using an encoder-decoder architecture. It describes a system that takes speech in one language as input, recognizes the speech to generate text, translates the text to another language, and synthesizes speech in the other language as output. The system consists of three main modules: speech recognition in the source language, text translation between languages, and speech generation in the target language. It aims to enable two-way translation between spoken sentences in different languages.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Slides of the presentation given at ICSE 2010 (http://www.sbs.co.za/ICSE2010/) on the paper (http://www.inf.usi.ch/faculty/lanza/Downloads/Bacc2010b.pdf).
This document is Gilbert Haro's digital resume and portfolio. It includes an introduction, details of his education at DeVry including courses and grades, work experience, recommendations, and work samples. The portfolio is organized with a table of contents and includes sections on his educational background, career goals, and qualifications for electrical engineering roles.
Minor project report format for 2018 2019 finalShrikantkumar21
The document describes a smart bulletin platform project submitted by Shrikant Singh and Nikita Shanker in partial fulfillment of the requirements for a Bachelor of Technology degree. The project aims to develop an examination seating arrangement system to computerize the traditional exam process and automatically generate seating arrangement reports. The system will allocate exam halls and seats to students based on their department, year, section, and other details. This is intended to make the exam process more efficient and reduce manual work.
This document provides an introduction to an Arduino starter kit, including what is included in the kit and how to use the included book to learn about the Arduino hardware, software, and programming. The kit contains an Arduino Uno board, sensors, displays, and other components. The book guides the user through 16 projects of increasing complexity to teach Arduino skills. It assumes no prior knowledge and provides step-by-step instructions and diagrams to help users build each project and understand how the code and hardware work together.
This project involves designing and developing a wireless, microcontroller-based humanoid arm with a five-fingered hand. Solidworks was used to design the mechanical components of the hand to resemble a human hand. Analysis was performed to ensure design specifications such as weight and cost were met. The hand will be 3D printed based on CAM codes generated in NX-CAM. An Arduino microcontroller board will enable wireless control of servo motors in the hand using a sensor-equipped control glove. The goal is to create a low-cost, biologically inspired robotic hand for applications such as bomb disposal, prosthetics and surgery.
This document is an assignment submission for an introduction to physical computing and programming course. It includes a summary of the student's personal project to create an electronic bird feeder. The project requirements are outlined, along with reflections on concepts and techniques learned through the project such as component selection, CAD design, coding, and debugging. Technical problems encountered and solutions are also discussed.
Noise has always been unwanted and undesirable, so the need for noise removal or cancellation comes into the picture. It involves removing the undesirable noise providing the source sound as output. The method of removing the noise is classified as passive noise reduction and active noise cancellation. The former uses the sound absorbing material to block the incoming noise, and the latter uses an adaptive algorithm to synthesize the anti-noise so as to cancel the noise through destructive interference. The project work is aimed at understanding the various noise cancellation techniques and to design a real-time system which helps in removing or minimizing the effect of
noise. There are different algorithms for cancellation of noise, here some algorithms are mentioned and the project is carried out with Least Mean Square (LMS) Algorithm. It involves both hardware implementation and software simulation. The software environment uses MATLAB Simulink environment to design the noise cancellation system and the hardware or real-time implementation is done using Texas Instrument (TI) DSK6713 which is basically a DSP processor, used to interface the programming environment with the real-time environment. The program for noise cancellation is written in Code Composer Studio v5.4.0 which is an Integral Development Environment to develop applications for TI Embedded Systems. The algorithm for Noise Cancellation focuses on Adaptive Filters which have the capability to change their transfer function by adjusting their weight coefficients to get the desired noise free signal.
Keywords: Active Noise Cancellation, Least Mean Square Algorithm, Adaptive Filters, TI DSK6713, Code Composer Studio
Robotic hand prototype as a didactic model.IRJET Journal
This document describes the development of a robotic hand prototype designed to be used as a didactic (teaching) model for students. The prototype was designed using 3D CAD software and 3D printed. It is controlled using an ATmega 328P microcontroller and flex sensors to read finger positions and servo motors to drive finger movement. The prototype was tested with students through classroom lessons focusing on electronics, microcontrollers, programming and robotics concepts. Students then programmed a binary counting sequence using the hand. The prototype was able to execute the programmed sequence but some fingers had slower movement times than desired due to the weight and flexibility of the 3D printed material. The robotic hand prototype was intended to motivate students and support their learning of robotics
Quick slide show demonstrating early investigation into patches, how i learnt construction and vital elements inside patching in Pure Data before my first patch build.
This document describes a microcontroller-based library gateway management system project submitted for a degree in electrical and computer engineering. It involves using infrared sensors and a microcontroller to count the number of people entering and exiting the library and communicate this data to a computer at the entrance. The computer will display the available chair count and book availability information to assist the guard in informing users. The project aims to better manage the library gateway and reduce user stress and time wasted. It proposes using a PIC microcontroller, infrared sensors, serial communication, and a visual basic application to achieve this goal.
A Facial Expression Recognition System A Project ReportAllison Thompson
This document is a project report submitted to Kathford International College of Engineering and Management for a Facial Expression Recognition System project. It was created by four students - Nalina Matang, Shreejana Sunuwar, Sunny Shrestha, and Sushmita Parajuli - under the supervision of Ashok Kumar Pant. The report describes the background, objectives, methodology, results and conclusions of the project to develop a system that can recognize facial expressions using image processing and machine learning techniques.
Electrónica: Diseño y construcción de un prototipo programable orientado la a...SANTIAGO PABLO ALBERTO
This document presents the design and construction of a programmable prototype for applying digital signal processing algorithms to audio signals. The project aims to address a lack of practical experience with digital filtering in an electronics program. It involves designing stages to meet requirements, building a circuit board, and implementing FIR and IIR filtering algorithms on a microcontroller. Testing confirms the prototype successfully applies digital filtering in real time. The project provides hands-on experience with digital signal concepts and design methodology.
cs4414: Operating Systems
http://rust-class.org/class-1-what-is-an-operating-system.html
Class 1: What is an Operating System?
Why so many programming languages?
Introducing Rust
The Revolution in an Industry That Will Change The World (Test & Measurement)Initial State
The document discusses how the test and measurement industry will revolutionize product development through embedded instrumentation and connected devices. It argues that embedded instruments inside integrated circuits will allow engineers to instantly access hardware signals and software events within products. Additionally, connecting products to the internet will enable remote debugging from anywhere. This will significantly speed up new product development and improve tools to accelerate technological progress. The financial and global impacts of these changes will be profound as industries are disrupted and new markets emerge.
This report provides an overview of speech recognition technology, including how speech recognition systems work, common applications, and future uses. It discusses key concepts such as utterances, pronunciation, grammar, accuracy, and training. The report also examines speech recognition software and provides examples of free and commercial speech recognition programs. Overall, the report finds that speech recognition has various applications in fields like education, healthcare, gaming, and more, and the technology is expected to continue advancing to support additional future applications.
This document provides an overview of an internship report submitted by Vishal Garg about embedded system development using an Arduino Uno. It includes chapters on introducing the project aims and methodology, a literature review on embedded systems, details about the Arduino Uno board and its programming, examples of programming projects completed, and conclusions from the internship. Tables of contents and figures are provided listing the different chapters, figures, tables, and photographs included in the report.
Los controladores lógicos programables en busca del desarrollo económico en l...KevinCando5
This document presents a research project investigating how programmable logic controllers (PLCs) can promote economic development in homes and productivity in Ecuadorian businesses through automation. The project aims to study homes and businesses in Pichincha province, specifically Cayambe canton, to demonstrate how PLCs and automation can generate savings, increase productivity, and help the environment. The document outlines the context, justification, objectives, methodology, administration, timeline and references that will be used for the research project.
The document describes a project submitted by 4 students to fulfill the requirements for a Bachelor of Technology degree, focusing on developing a voice operated robot under the supervision of Loknath Reddy. It includes certificates, declarations, acknowledgements and an abstract describing the robot's ability to perform functions through voice commands by interpreting human language and converting it to machine commands.
The document provides an overview of the CS101 Introduction to Computing course. It discusses the course objectives to build an appreciation of fundamental computing concepts, proficiency in productivity software, and beginner web development skills. The course structure is outlined, covering these topics over 15 weeks through lectures, readings, and assignments culminating in a midterm and final exam. Assessment is based on assignments, a midterm exam, and a final exam. Key figures in early computing history and capabilities of modern computers are also introduced.
IRJET - Speech to Speech Translation using Encoder Decoder ArchitectureIRJET Journal
This document summarizes a research paper on speech-to-speech translation using an encoder-decoder architecture. It describes a system that takes speech in one language as input, recognizes the speech to generate text, translates the text to another language, and synthesizes speech in the other language as output. The system consists of three main modules: speech recognition in the source language, text translation between languages, and speech generation in the target language. It aims to enable two-way translation between spoken sentences in different languages.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptxEduSkills OECD
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
3. EDUCATION
S T E A M
Science Technology Engineering Arts Mathematics
R O B O C O
4. E D U C AT I O N
S T E A M
Science Technology Engineering Arts Mathematics
5. APA ITU ROBOCO
SENSOR/ /PANCA INDRA
MENDETEKSI KONDISI LUAR BAIK ITU BERUPA PANAS,
SUARA, DLL SEPERTI TUBUH MANUSIA ADAKULIT
TELINGA DLL
01
KONTROLER / OTAK
MENGOLAH DAN MENGATUR INPUT ATAU MASUKAN
MENJADI SEBUAH PERINTAH
02
AKTUATOR
/PENGGERAK
03
MENDAPAT PERINTAH DARI KONTROLER/ OTAK UNTUK
BERGERAK SEPERTI BADAN, TANGAN, KAKI DLL
6. S c i e n c e T e c h n o l o g y E n g i n e e r i n g A r t s M a t h e m a t i c s
Software yang digunakan
MBLOCK 3 SRACTH FOR ARDUNO ARDUINO UNO
9. KESEMPATAN IKUT KOMPETISI/ LOMBA ROBOT
YANG ADA
PAKET KIT (ALAT BAHAN) PEMBELAJARAN
BELAJAR ROBOCO 1 PEKAN SEKALI
BELAJAR HARDWARE, SOFTWARE, LENGKAP
DENGAN METODE STEAM
BELAJAR LANGSUNG PRAKTEK
Apa aja yang didapat??
10. S c i e n c e T e c h n o l o g y E n g i n e e r i n g A r t s M a t h e m a t i c s
PAKET KIT PEMBELAJARAN
SOTWARE
Programmer
SEMESTER 2
BOX BERUPA TOOL BOX
BUKU BERUPA PENJALASAN
PELATIH
HARDWARE
Manager
GABUNGAN SOFTWARE,
HARDWARE & SENDOR
Designer
PART YANG SAMA TIDAK
DIBERIKAN ULANG
SEMESTER 1
BOX BERUPA TOOL BOX
BUKU BERUPA PENJALASAN
PELATIH
SEMESTER 2
BOX BERUPA TOOL BOX
BUKU BERUPA PENJALASAN
PELATIH
PART YANG SAMA TIDAK
DIBERIKAN ULANG
PART YANG SAMA TIDAK
DIBERIKAN ULANG
11. KEGIATAN ESKUL
Get a modern PowerPoint Presentation that is beautifully
designed. I hope and I believe that this Template will your Time.
ELEKTRIK, MEKANIK
01
Get a modern PowerPoint Presentation that is beautifully
designed. I hope and I believe that this Template will your Time.
ELEKTRONIK, MEKANIK
02
Get a modern PowerPoint Presentation that is beautifully
designed. I hope and I believe that this Template will your Time.
ROBOT VIRTUAL/ SOFTWARE
03
Get a modern PowerPoint Presentation that is beautifully
designed. I hope and I believe that this Template will your Time.
GABUNGAN HARDWARE
SOFTWARE
04