PENDENT LIGHTS
A pendant light is any light fixture that is mounted to the ceiling and
hangs down from the ceiling on a rod or chain . it's suspended like the
pendant on a necklace, and that's where it gets its name.
The most basic pendant light have a single light bulb mounted base
up, inside a globe or under an open shade or open reflector.
PARTS OF PENDENT LIGHT
CANOPY
TUBING
PENDENT
HOLDER
PENDANT LIGHT
by drilling side holes they can be used to
hang glass with bead chain. Made of
stamped steel, stamped brass or brass
casting or die cast white metal
a cord, chain, or metal rod, allow
the light to hang from celling
Holds the light
MATERIAL
CANOPY :Steel
TUBING : Insulated copper
wire
PENDENT
HOLDER : Steel, glass
and aluminum , brass
 Pendants can be provided as ambient or task lighting or
general lighting .
 When a pendant lights, used for general lighting, many of
these fixtures are designed to throw at least some of the light
up, onto the ceiling. As that light spreads across the ceiling and
is reflected back down, it helps us see more of the room, or
hallway, of course
 A pendant light fixture can be mounted as the central fixture in
almost any room
 for instance -corridor or hallway
stairwells
dining rooms
kitchens
bedrooms
highlight our photos, paintings and
sculpture
ÙSES
Above an kitchen island.
They provide adequate task lighting
while also providing an opportunity to
enhance or reinforce the kitchen design.
Typically pendants should be placed 28 to 34
inches above the countertop
Over a table.
The fixture can provide brighter light for any
tasks done at the table and softer light while
dining. The recommended height to hang a
pendant above a table is 28 to 32 inches, but the
fixture can be hung slightly higher or lower
depending on personal preference, fixture size
and ceiling height.
In the hallway.
Fixtures hung in an entry or hallway can add a
lot of drama and beauty, casting shadows while
providing light. Hanging a series of identical
fixtures down the length of a hall creates a classic
look. There be approximately eight feet of
clearance above the floor
in a stairwell.
If you have the space, hanging pendant
lighting at different height levels creates a really
striking display, like an illuminated installation.
creates an illuminated link between two floors.
MANUFACTURURS AND SUPPLIES ( In DELHI –NCR Region)
Kotla mubarukpur, New Delhi, Okhla Industrial Area Phase-1,
DIFFERENCES BETWEEN CHANDELIER AND PENDANT LIGHTS
Chandelier, pendant lights are two common lighting types used to adore rooms in
home. chandelier and pendant lights in detail. If chosen the right lighting type and
location, chandelier, pendant lights can improve the value of your home.
Both of them hangs from the ceiling to create a new value for the surroundings
DIFFRENCES
 in suspension system : Generally, pendant lights hang from a chain or a cord
with single or a pair of lights on the end. Unlike pendant lights, chandelier lights
hang from a branched system to handle many light bulbs.
 In Material. Common materials used for the production of pendant lighting styles
include nickel, bronze, tiffany glass and stained glass. Apart from the above
specified materials, pendant lights are also manufactured from materials like brushed
steel, blown glass and lamp shades. On the other hand the production of
chandelier lighting types include steel, wrought iron, crystal and bronze.
 chandelier lights are generally heavier in weight
 chandelier are expensive as compared to pendent lights
ÙSES
 dining room
 kitchens
 Bedrooms
 in hallways
Placing them above the island just gives more
light for prepping dinner and decorating
cookies and adds to your kitchen’s
personality and theme.
Above an kitchen island.
using a chandelier over the bed in a bedroom
is a great idea for aesthetic reasons and add
some romance . They can also be placed over
the side tables
In a bedroom
Make walk from room to room a bit more
interesting. Hanging a chandelier above the
path to light the way in a fashion-forward
style.
In the hallway.
Make your walk from room to room a bit
more interesting. Hang a chandelier or two
above your path to light the way in a
fashion-forward style.
Now take a look (and drool) over these
beautiful places, spaces and chandelier
locations. Gra
A sconce is a wall-mounted form of lighting that has been used
since ancient times to hold candles or another source of light.
Sconces lighting gives a room its warmth. While ceiling lights
disperse illumination downward and out, sconces brighten each
wall and often give those walls a bit of much needed decoration
too
BACKPLATE
ARM
HOLDER
ARMBACK
FIXTURE SHADE
ackplates are Made from Sheet Metal
at is pressed into shape. They are used
lightingas a backplates for wall
conces.
arm that extends from the
backplate, holding the socket
away from the wall
shade that directs
light either up or
down.
backplate is drilled into
wall and support the
fixture and It's part
Holds the light
PARTS OF PENDENT LIGHT
BACKPLATE : Steel or
copper
ARM: copper or steel
FIXTURE SHADE : : Steel,
glass and aluminum , brass
MATERIAL
 There are three main types of lighting that work together to achieve
balance: ambient, task and accent.
 Wall lights come in a variety of styles including traditional, modern, or
transitional.
 Contemporary and modern wall sconces give a space distinction and
provide an important functional service while other styles of wall
sconces can give a room personality and a sense of direction when
decorating.
 When used correctly, wall sconces not only provide illumination and
safety, they also create an air of sophistication and elegance
throughout your home
 They can be Positioning:
hallway.
dining room
bedroom
bathroom
retail stores, restaurants and hotels
ÙSES
In the hallway.
Wall sconces are often found in long hallways
where they provide the general illumination for
foot traffic, plan to have them spaced 6 – 8 feet
apart and always make sure and sconces are
hung roughly 60 inches from the floor. This will
give a beautiful and safe addition to any
overhead light used.
Over a dinning table
Sconces are very popular in the dining
room where, coordinated with a dining
chandelier, they add a layer of ambient light
and an appealing decorating effect., plan to
have your sconces installed roughly 60
inches from the floor.
In bathroom
Sconces can add key task lighting in the
bathroom. With a sconce hung on each side of
your mirror you can create a bright, even light
that is just perfect for daily grooming tasks. When
selecting any fixture for a bathroom with a
shower, make sure the fixture is rated for damp
environments. Again, have your sconces hung
roughly 60 inches from the floor.
In a bedroom
Wall sconces are perfect for adding a bit of
ambiance and mood lighting into a bedroom.
Their downward glow fill this bedroom with a
warm and inviting illumination
MANUFACTURURS AND SUPPLIES ( In DELHI –NCR Region)
Jainson emporio pvt. Lmt., New Delhi,
Future and technologies , delhi

Pendent lights

  • 2.
    PENDENT LIGHTS A pendantlight is any light fixture that is mounted to the ceiling and hangs down from the ceiling on a rod or chain . it's suspended like the pendant on a necklace, and that's where it gets its name. The most basic pendant light have a single light bulb mounted base up, inside a globe or under an open shade or open reflector.
  • 3.
    PARTS OF PENDENTLIGHT CANOPY TUBING PENDENT HOLDER PENDANT LIGHT by drilling side holes they can be used to hang glass with bead chain. Made of stamped steel, stamped brass or brass casting or die cast white metal a cord, chain, or metal rod, allow the light to hang from celling Holds the light
  • 4.
    MATERIAL CANOPY :Steel TUBING :Insulated copper wire PENDENT HOLDER : Steel, glass and aluminum , brass
  • 5.
     Pendants canbe provided as ambient or task lighting or general lighting .  When a pendant lights, used for general lighting, many of these fixtures are designed to throw at least some of the light up, onto the ceiling. As that light spreads across the ceiling and is reflected back down, it helps us see more of the room, or hallway, of course  A pendant light fixture can be mounted as the central fixture in almost any room  for instance -corridor or hallway stairwells dining rooms kitchens bedrooms highlight our photos, paintings and sculpture ÙSES
  • 6.
    Above an kitchenisland. They provide adequate task lighting while also providing an opportunity to enhance or reinforce the kitchen design. Typically pendants should be placed 28 to 34 inches above the countertop Over a table. The fixture can provide brighter light for any tasks done at the table and softer light while dining. The recommended height to hang a pendant above a table is 28 to 32 inches, but the fixture can be hung slightly higher or lower depending on personal preference, fixture size and ceiling height.
  • 7.
    In the hallway. Fixtureshung in an entry or hallway can add a lot of drama and beauty, casting shadows while providing light. Hanging a series of identical fixtures down the length of a hall creates a classic look. There be approximately eight feet of clearance above the floor in a stairwell. If you have the space, hanging pendant lighting at different height levels creates a really striking display, like an illuminated installation. creates an illuminated link between two floors.
  • 8.
    MANUFACTURURS AND SUPPLIES( In DELHI –NCR Region) Kotla mubarukpur, New Delhi, Okhla Industrial Area Phase-1,
  • 10.
    DIFFERENCES BETWEEN CHANDELIERAND PENDANT LIGHTS Chandelier, pendant lights are two common lighting types used to adore rooms in home. chandelier and pendant lights in detail. If chosen the right lighting type and location, chandelier, pendant lights can improve the value of your home. Both of them hangs from the ceiling to create a new value for the surroundings DIFFRENCES  in suspension system : Generally, pendant lights hang from a chain or a cord with single or a pair of lights on the end. Unlike pendant lights, chandelier lights hang from a branched system to handle many light bulbs.  In Material. Common materials used for the production of pendant lighting styles include nickel, bronze, tiffany glass and stained glass. Apart from the above specified materials, pendant lights are also manufactured from materials like brushed steel, blown glass and lamp shades. On the other hand the production of chandelier lighting types include steel, wrought iron, crystal and bronze.  chandelier lights are generally heavier in weight  chandelier are expensive as compared to pendent lights
  • 11.
    ÙSES  dining room kitchens  Bedrooms  in hallways
  • 12.
    Placing them abovethe island just gives more light for prepping dinner and decorating cookies and adds to your kitchen’s personality and theme. Above an kitchen island. using a chandelier over the bed in a bedroom is a great idea for aesthetic reasons and add some romance . They can also be placed over the side tables In a bedroom Make walk from room to room a bit more interesting. Hanging a chandelier above the path to light the way in a fashion-forward style. In the hallway.
  • 13.
    Make your walkfrom room to room a bit more interesting. Hang a chandelier or two above your path to light the way in a fashion-forward style. Now take a look (and drool) over these beautiful places, spaces and chandelier locations. Gra
  • 15.
    A sconce isa wall-mounted form of lighting that has been used since ancient times to hold candles or another source of light. Sconces lighting gives a room its warmth. While ceiling lights disperse illumination downward and out, sconces brighten each wall and often give those walls a bit of much needed decoration too
  • 16.
    BACKPLATE ARM HOLDER ARMBACK FIXTURE SHADE ackplates areMade from Sheet Metal at is pressed into shape. They are used lightingas a backplates for wall conces. arm that extends from the backplate, holding the socket away from the wall shade that directs light either up or down. backplate is drilled into wall and support the fixture and It's part Holds the light PARTS OF PENDENT LIGHT
  • 17.
    BACKPLATE : Steelor copper ARM: copper or steel FIXTURE SHADE : : Steel, glass and aluminum , brass MATERIAL
  • 18.
     There arethree main types of lighting that work together to achieve balance: ambient, task and accent.  Wall lights come in a variety of styles including traditional, modern, or transitional.  Contemporary and modern wall sconces give a space distinction and provide an important functional service while other styles of wall sconces can give a room personality and a sense of direction when decorating.  When used correctly, wall sconces not only provide illumination and safety, they also create an air of sophistication and elegance throughout your home  They can be Positioning: hallway. dining room bedroom bathroom retail stores, restaurants and hotels ÙSES
  • 19.
    In the hallway. Wallsconces are often found in long hallways where they provide the general illumination for foot traffic, plan to have them spaced 6 – 8 feet apart and always make sure and sconces are hung roughly 60 inches from the floor. This will give a beautiful and safe addition to any overhead light used. Over a dinning table Sconces are very popular in the dining room where, coordinated with a dining chandelier, they add a layer of ambient light and an appealing decorating effect., plan to have your sconces installed roughly 60 inches from the floor.
  • 20.
    In bathroom Sconces canadd key task lighting in the bathroom. With a sconce hung on each side of your mirror you can create a bright, even light that is just perfect for daily grooming tasks. When selecting any fixture for a bathroom with a shower, make sure the fixture is rated for damp environments. Again, have your sconces hung roughly 60 inches from the floor. In a bedroom Wall sconces are perfect for adding a bit of ambiance and mood lighting into a bedroom. Their downward glow fill this bedroom with a warm and inviting illumination
  • 21.
    MANUFACTURURS AND SUPPLIES( In DELHI –NCR Region) Jainson emporio pvt. Lmt., New Delhi, Future and technologies , delhi