The Parshava Infant Care Centre features a warmer, optional CPAP and pulse oximeter modules, and weighing scale. The warmer uses infrared heating to warm babies and can be manually or automatically controlled. Observation lights turn on and off by passing a hand over the switch and can be dimmed in the same way. Vital signs are displayed on an LCD and stored for 24 hours. The baby bed can tilt and rotate in different positions. The height of the bed and warmer can be adjusted together using a foot switch. The system is designed to minimize infections with fewer parts and crevices for bacteria to breed.

1. Parshava Infant Care Centre
Features and Benefits

2. Part Identification
Heater Unit
Alarm Indicator
Control Panel
Mayo tray
CPAP Control Panel
Mayo tray
IV Stand
Bed
Bed
Tilting
Height
Adjustment
Pedestal
Castor

3. Modules
CIC101 has 4 modules
• Warmer
• CPAP (Optional)
• Pulse Oximeter (Optional),
• Weighing Scale

4. Warmer
• Single element 600w quartz infrared heating element placed in a
parabolic reflector
• Intensity of the radiation can be adjusted
- can be set manually at a desired level or
- controlled automatically in the servo mode.

5. Observation lights
Obervation Lamp
• Care givers disinfect their hands before any procedure on the baby.
They have to switch on the observation lamps which is again a
physical contact with the switch - which means to disinfect their
palms again.
CIC 101 provides an unique solution here…….

6. Observation lights
• The two examination lamps 'soft-start' to minimize disturbing the baby.
• The lamps are switched on and off by passing a hand over the switch.
• To dim the lamps, hold a hand over of the switch, the lamps will begin to
dim automatically, remove the hand when the required brightness is
obtained.

7. Display and storage module
Vital parameters are all displayed in an LCD Graphic and are clearly
readable Pulse oximetry and heart rate trends are displayed easily.
All signals such as
Temperature, Heart rate, Weight, SpO2 are stored for 24 hours.

8. Weighing Scale
• The weight of the infant can be monitored without disturbing the infant
• The weight of the baby can be measured automatically at different times of the
day and stored. Weight trend charts can be displayed readily.

9. Continuous Positive Airway Pressure ( CPAP )
Used to induce spontaneous breathing in infants by applying a constant
excess pressure through tubes connected to the nostrils.
Thereby immature lungs are opened by excess pressure and exchange of gases is
facilitated
1. Sophisticated electronic oxygen-air blender. The oxygen concentration and
oxygen-air flow rate are variable.
2. Auto Calibration
3. Gas Supply check

10. Baby bed
• Oval shaped bed for greater access to baby
• The advantages of this are readily appreciated when comparing
with the sharp and inconvenient edges of other designs.

11. Tilt & rotate options
baby bed
±12°
• The bed may be turned about on the horizontal plane and locked at
three position.
• The bed may be tilted +/- 12 degree Trendelberg- and Fowler-like after
surgery and after every feed.

12. Height adjustment
• The height of the bed may be by operating a foot switch provided on the
base. The bed and the warmer change height together so that the
distance between them is maintained constant
• Foot switch given on both sides

13. Suction
• The suction bottle collects fluid removed by suction from the infant's
respiratory passage.
• The bottle is autoclavable.

14. Infection control
Most equipment available today have too many parts
Which means
Too many joints / gaps / crevices
Which means
A perfect breeding ground for micro organisms leading to
infection
INFECTION IS TODAY THE MAJOR CAUSE FOR INFANT MORTALITY

15. Mayo trays
The tray may be swiveled and their height
may be adjusted for convenience.

16. IV Poles
The IV Pole may be swiveled for convenience,
and their height may be adjusted.
These may be swivelled for convenience,
and their height may be adjusted.
Capacity to hold upto eight infusion pumps.

17. X-RAY Compartment
X-ray tray may be slid into and out of the X-ray
compartment without any need to handle the baby.

18. Ease of installation
Part Name:
1. Base Assembly
2. Pillar Assembly
3. Neck & Heater Box Assembly