SIMMCO is an industrial services company focused on safety, quality, and customer satisfaction. It provides turnaround, construction, and fabrication services to industries such as refining, chemicals, pulp/paper, and steel. SIMMCO has a large workforce, extensive training programs, and a strong safety record. It recently completed a large project for ThyssenKrupp Stainless in Calvert, Alabama which involved mechanical, piping, and structural work.

1. Heart Over Matter A Division of the Blurton Group

2. AGENDA
• Company Overview
• Core Values
• Safety / Employee Training
• Services Summary
• Turnaround Services
• Construction Services
• Fabrication Services
• Project Overview
• Thyssen Krupp Stainless – Calvert Alabama

3. SIMMCO Core Values
At SIMMCO, we believe that continued expansion and growth
are realized by being committed to Safety and Quality
throughout all company Employees.
• Safety – SIMMCO’s goal is to provide a safe and healthy work environment
for all employees. The safety and well being of each and every employee is
the most important aspect of the safety process. Every employee must be
responsible for their safety and the safety of their fellow employees.
• Quality – SIMMCO is committed to customer satisfaction through
performance excellence. To achieve our vision, we must continuously
improve the quality of all products and services that we provide to our
customers and potential customers. We are committed to doing so by using
our most important resource (our employees at every level) to understand
and continuously improve our processes. The management team is
committed to providing the company with the best tools possible to
succeed.

4. Office Location
Brownsville, TN
Corporate Office
Aerial Photo of
Corporate Office

5. Safety / Employee Training

6. Safety – 7 Points of Light
1. HAVE I ASSESSED THE RISKS INVOLVED?
2. HAVE I SUCCESSFULLY REMOVED THE RISK?
ASK YOURSELF
3. AM I MY BROTHERS KEEPER? THESE SEVEN
4. DO I UNDERSTAND THE TASK?
5. AM I COMMITED TO DOING THE TASK WITH
QUESTIONS BEFORE,
SAFETY BEING THE FIRST PRIORITY? DURING AND AFTER.
6. DO I HAVE THE PROPER PPE FOR THIS TASK?
7. HAVE I LEFT THE AREA CLEAN, SECURE
AND RISK FREE?

7. Point #1 - HAVE I ASSESSED THE RISKS INVOLVED?
IS THE AREA CLEAR OF DEBRIS? IS ANYONE WORKING OVERHEAD?
IS THERE A ZERO ENERGY STATE?

8. Point #2 - HAVE I SUCCESSFULLY REMOVED THE RISKS?
DID I SECURE ANY
OPEN HOLES? DO I NEED BARRICADES? DO I HAVE WELDING
SCREENS WHERE NEEDED?
DO I NEED TO LOCKOUT?

9. Point #3 – AM I MY BROTHERS KEEPER?
Will I offer a helping hand when I see a need?
Have I taken time to stop and tell him to put his
glasses on, or did I just keep on walking?

10. Point #4 – DO I UNDERSTAND THE TASK?
Has my Supervisor explained the task? Do I understand the task?

11. Point #5 – AM I COMMITETED TO DOING THIS TASK
WITH SAFETY AS THE FIRST PRIORITY?
I will NOT take “shortcuts”!!! Is my JSA in order?
Has my equipment been properly inspected?

12. Point #6 – DO I HAVE THE PROPER PPE FOR THIS TASK?
I know that my JSA is an
important part of my PPE Is my Fall Protection adequate?

13. PPE EASY AS 1-2-3
1 2 3
HAT GLASSES GLOVES

14. Point #7 – HAVE I LEFT THE AREA CLEAN, SECURE AND
RISK FREE ?
I WILL “SEE IT, SAY IT, AND FIX IT.”

15. Do I feel comfortable that no one will be at risk as a result of my housekeeping?

16. SO YOU SEE , BY SIMPLY ASKING YOUR SELF THESE SEVEN SIMPLE
QUESTIONS WHEN PLANNING AND PERFORMING YOUR TASKS, TOGETHER
WE CAN VIRTUALLY ELIMINATE INCIDENTS.

17. SIMMCO - Safety
• SIMMCO 3 Year Safety Record
• 1,200,508 Work-Hours
• 1.49 AVG. TRIR
• 0.92 AVG EMR
• MSHA Certified
• Member of ISNetworld
• Zero (0) lost work days
• In-house Safety Department
• OSHA regulated & compliant

18. Employee Staffing & Capability
Full-Time Hiring & Staffing
Corporate location in Brownsville, TN
Database of 10,000+ Current / Former Craft
Staffing Capabilities
Average Daily Workforce 352
Maximum Turnaround Capability 650

19. TRAINING & CERTIFICATION
• Minimum Training Requirements
• Drug Test / Pre-Employment Physical
• Written Craft Assessment
• Client Site Specific Training
• Each Employee completes “7 Points of Light” Safety
Orientation.
• National Center for Construction Education
& Research (NCCER)
• Craft Assessment & Training Program

20. Turnaround Services

21. Turnaround Supervision &
Staffing Capabilities
• 30 Full Time Project Managers
• 6 Planners & Schedulers
• 5 QA/QC Managers
• 650 work force max. Staffing
Partial listing of SIMMCO‟s Services:
• Turnarounds & Revamps
• Process Heater Erection & Revamps
• Procurement, Planning & Scheduling
• Specialty Welding
• Alloy Pipe Specialists
• Field Installation & Modification
• Tower Work
• Heavy Crane & Rigging

22. SIMMCO delivers to their clients a complete line of services required for safe and
successful turnarounds, shutdowns and emergency outages in the Chemical,
Petrochemical, Refining, Pulp & Paper, and Steel Mill industries.
We have been successful due to our excellent project management, procurement,
planning, scope execution, & subcontractor management for all projects.
Management and workforce stability, constant communication, forward thinking decision
making and project oversight are symbols of SIMMCO‟s Turnaround Division.

23. Fabrication Services

24. SHOP FABRICATION FACILITY
Our 80,000 s.f. fabrication shop, outfitted with
state of the art equipment, is staffed with
qualified welders, highly experienced in
performing under the most stringent
requirements of ASME code and radiographic
inspection for carbon and stainless steel, as well
as many of the alloy metals. Prefabricated work
is carefully planned and detailed by our
engineers and coordinated with the field to meet
onsite conditions, resulting in important savings
of time and often cost.
Our Code Stamp capabilities in ASME code work
consists of the U, S & R stamps. This makes us
one of a very few contractors in the southeast to
hold multiple ASME codes.
- Pressure Vessels
- Power Boilers
- Repair & Alteration

25. SHOP FABRICATION FACILITY (continued)
Our pipe fabrication division is geared toward the furtherance of our construction and mechanical division.
We have the capacity and the equipment to handle any size pipe spools that our customers require. We also
have fifteen acres of land for material inventory and/ or room to expand our services. Currently, we produce
1200 large spool pieces a month. We pride ourselves on being able to offer the industry welds being made at
rate of one (1) diameter inch per minute. With our large bays and 4 cranes with 10 ton crane capacity each
gives our shop the ability to fabricate large quantities of pipes, skids or complete modules.
Our engineering division can produce shop spool drawings from our customer‟s orthographic or isometric
drawings or they may be supplied by our clients.
Quality control begins with our shop personnel with visual inspection and progresses through supervision,
authorized inspector, hydrostatic test and x-ray. Any special testing required can be obtained through third
party non-interest groups. Separation of common and exotic metals is controlled by isolation and separate
bay area techniques. Passivation of stainless welds is available if required.

26. Construction Services

27. SIMMCO Construction Capabilities
• Project Size & Cost:
• $5 - $100 Million
Construction Value
• Project Locations:
• All Domestic/International
Facilities
• Markets Served:
• Refining, Chemical, Pulp &
Paper, Food & Beverage,
Oil & Natural Gas, Power,
Terminal & Storage and
Alternative Fuels

28. SIMMCO CONSTRUCTION SERVICES
• Pipe Support & Structural
Fabrication
• Piping
• Process
• Utility
• Sanitary
• Power
• Equipment Setting
• Mechanical Millwrights
• Laser Millwrights
• Vessel Fabrication
• Electrical &
Instrumentation
• Modular Fabrication

29. SIMMCO PROJECT HIGHLIGHT
ThyssenKrupp Stainless
Calvert, AL
• 800,000 Work-hours/ $80MM • All process piping for:
• Mechanical /Process Piping, • Melt Shop, Hot & Cold Rolling
Instrumentation and Controls, Mills
Equipment Millwrights, and • AOD (Argon Oxygen Decarbonizer
Structural Support installation. • Acid Storage Plant
• 2009 - Present • Acid Regeneration Plant

30. Food and Beverage Industry
The Food and Beverage industry requires an industrial contractor who understands the critical role in the
execution required for a successful project. Maintaining product purity is essential for all Installations,
Modifications, Service and Repairs, and Maintenance Work. Equally important is the ability to provide
prompt and effective emergency response for all process cooling, and cold storage emergencies.
SIMMCO‟s Superintendents and field personnel have over 20 years of experience and have completed
projects with a full range of process and piping systems that satisfy the special requirements of ultra-clean
and CIP (Clean-In-Place) projects. We can also provide ongoing maintenance with our large workforce of
skilled personnel and project managers who have countless years of experience in this field. You will find that
our management staff and field employees take extra steps to ensure the quality of their work to sustain long-
term relationships with some of the most prominent names in the industry.
Capabilities:
• Sanitary Process Food Piping
• Clean-in-Place Systems
• Fabrication of Sanitary Platforms
• Installation of Process Conveyor Systems
• Installation of Process Equipment
Clients
• Proctor & Gamble
• Kellogg‟s
• Hershey‟s
• Unilever
• Cargill

31. Demo and Storage
Using our internal Crane and Rigging division, Trucking capabilities as well as our Facilities and Properties
division, SIMMCO offers a turn key solution for the Demo, Transit and Storage of our clients Equipment or
Units for later use or installation.
PROJECT HIGHLIGHT
Power Plant
Brownsville, Tennessee
SIMMCO was contracted to demo their existing Power Plant. The unit was taken out of service, dismantled
and separated per the clients instructions. The unit stack was trucked to the US border for final delivery to a
client in Venezuela and the balance of the plant was sent to a client in Hobbs New Mexico.
• 50,000 workhours
• Crew of 30 craftsmen & project managers
• Divisions used
• Crane and Rigging
• Field Services
• Fleet Services

32. Crane & Rigging

33. Crane & Rigging
With over 35 years of industry experience , SIMMCO and its Crane and Rigging division offers a wide and
extensive range of crane services for the lifting of machinery, equipment, and other materials associated
within a majority of the Industrial Market sectors. Our Crane and Rigging division continues to exceed the
industry standards for safety, dependability and performance. We offer 24 - hour service, 7 days a week to
ensure that our clients needs are met for any project need. All our cranes and attachments are operated by
our own professional operators as well as maintained and serviced by our own maintenance and support
people.
We offer cranes ranging from 10 tons to 100 tons. All cranes and booms are inspected annually as well as a
daily routine safety checks and inspections. With an inventory of operated hydraulic, rigger, and truck
cranes, our crane service can quickly and efficiently complete projects to their completion.
Crane & Forklift Services We Provide:
• Boom Truck Cranes to 15 Tons
• Carrier Deck Cranes to 15
• Hydraulic Truck Cranes to 100 Tons
• Rough Terrain Cranes to 60 Tons
• CCO Operator Certification Program
• Crane Mats, Spreader Bars and
Specialized Rigging
• Emergency Services
• Specializing in Plant Turnaround/Outage Planning
• Forklift & Removable Boom System to 70 Tons
• Telescoping Personnel Lift - 120' & 125„
• 4WD/RT Telescoping Forklift to 5 tons

34. Photos

35. Photos

36. Photos

37. Photos

38. If you recognize and appreciate sound, no nonsense judgment in project
management - the kind developed through years of hands-on field
experience……if you value quality and service – delivered on time and
within budget…… then you want SIMMCO