4. INTRODUCTION
• The main objective of this project is to monitor the
air eminence in industrial and urban areas.
• In this Arduino platform is used to communicate the
data simply and quickly.
• WSN (Wireless sensor network) acts as the trans
receiver. communication technology.
• The projected monitoring system can be transferred
to or shared by different applications. Through IOT
we can able to visualize the values from the globe.
• Keywords – Wireless Sensor Network(WSN), Air
Quality Monitoring Systems (AQMS), Gas Sensors
(CO).
9. ARDUINO
• Arduino is open-source hardware.
• AnArduino board consists of anAtmel 8-, 16- or 32-bit
AVR microcontroller (ATmega8,
A
Tmega168,A
Tmega328,A
Tmega1280,A
Tmega2560).
• Arduino microcontrollers are pre-programmed with
a boot loader that simplifies uploading of programs to the
on-chip flash memory.
• Boards are loaded with program code via a serial
connection to computer.
• TheArduino board exposes most of the microcontroller's
I/O pins for use by other circuits.
11. EXISITING SYSTEM
BLUETOOTH
• Drawback: it passes information only one device.
GSM
• Drawback: when signals drops it passes information
slowly.
ZIGBEE
• Drawback: we need more than one zigbee.
It is cost effective and more expansive
13. • The
interrelated computing devices, mechanical
Internet of Things (IoT) is a system of
and
digital machines, objects, animals or people that are
provided with unique identifiers .
• IoT has evolved from the convergence of wireless
technologies, micro-electro mechanical systems
(MEMS), micro services and the internet.
• also used in operational technology (OT),
information technology (IT).
14. P
R
O
N
P
O
O
S
D
E
E
D
M
S
C
Y
U
S
T
E
M
IOT(NODE MCU)
• Nodemcu is an open source iot platform.
• It includes firmware which runs on the ESP8266 WIFI
SOC from Espressif Systems,and hardware which is
based on the ESP-12 module.
• The firmware uses the Lua scripting language.
• It is based on the eLua project,and built on the
Espressif Non-OS SDK for ESP8266.
• It uses many open source projects,such as lua-
cjson,and spiffs.
17. AIR QUALITY SENSOR
•Gas Sensor(MQ2) module is useful for gas leakage
detection. (home and industry)
•It is suitable for detecting H2, LPG, CH4, CO, Alcohol,
Smoke or Propane.
•Due to its high sensitivity and fast response time,
measurement can be taken as soon as possible.
•The sensitivity of the sensor can be adjusted by
potentiometer.
19. ADVANTAGES
• Sensors are easily available.
• Detecting a wide range gases like CO2,CO etc.
• Simple , compact and easily handle.
• Continous update of change in percentage of
quality.
20. APPLICATIONS
• Roadside pollution monitoring.
• Industrial perimeter monitoring.
• Site selection for reference monitoring stations.
• Indoor air quality monitoring.
21. FUTURE SCOPE
In future the project can be upgraded in more ways
than one.
• Interface more no.of sensors to know gases present
in air.
• Design webpage and upload data on webpage.
• Interface SDCARD to store data.
• Interface GPS module to monitor the pollution.
22. CONCLUSION
• The system to monitor the air of environment using
arduino micro controller.
• Iot technology proposed to improve quality of air.
• Gas sensor gives the sense of different type of
dangerous gases.
• It supports new technology and healthy life concept.