Shetteppa Najjarad is an electrical and instrumentation engineer with 5 years of experience seeking new opportunities. He currently works as a Project Engineer overseeing electrical and instrumentation for various plants. He has experience in equipment selection, installation, commissioning, maintenance, and troubleshooting. He is proficient in developing specifications, preparing bills of quantities, and liaising with clients. He has worked on projects in India and Malaysia.

1. Mobile: +91 9742344832 E-Mail: shetteppa.najjarad@gmail.com
+919632750232
In quest of challenging opportunities in the domain of Electrical and Instrumentation
engineering with a leading organization
An Overview:
 A proactive visionary having a 5 years of experience in the areas of Projects, Equipment selection,
Erection/ Installation/ Commissioning (1.5 years onsite Malaysia).
 Currently associated with Plant Supervision India Ltd. as Engineer looking after Electrical and
Instrumentation
 Proficiency in selecting Electrical systems, developing the specification & preparing BOQ for Electrical,
Automation and Instrumentation for different Plants.
 Possess excellent communication, analytical, negotiation and relationship management skills with proven
ability in liaising with clients.
 Preparation &Evaluation of technical specifications for the various suppliers.
Professional experience:
I am having an experience of total 5years, At Present working as Project Engineer (Electrical and
Instrumentation) in Empro Plant Supervision India Pvt Limited (Head office Denmark), Bangalore,
in Project Erection and Commissioning & Cement Plant Maintenance from Jan-2015 to till date.
I worked as an Engineer (Electrical) in M/s Uttam Galva Metalics Limited Wardha Maharastra from
JUNE- 2014 to Dec-2014 looking after Sinter Plant (75sq.mm) maintenance activities as
a section engineer.
I worked as an Engineer (Electrical and Instrumentation) in M/s Xindia Steels Limited Koppal
Karnataka, in maintenance and planning section from Nov - 2011 to May-2014.
Educational /Courses Credentials:
• Bachelor of engineering in Electrical & Electronics Engg, from Basaveshwar Engineering College
(Autonomous) Bagalkot, Under VTU Belgaum. Aggregate 70.5% (CGPA = 7.80), Year of Passing –
2011.
• Pre –University education in Science (PCMB) from Basaveshwar Science College Bagalkot.
Percentage - 78%
• SSLC from Ramlingeshwar High School Kundargi, Karnataka Secondary Education Board.
Percentage - 84.64%
SHETTEPPA NAJJARAD

2. Key Projects Handled:
• Instrumentation & electrical commissioning at ‘Dalmia Cement’ Mudhol, Karnataka from Jan –
2015 to May – 2015.
• Electrical and instrumentation erection, commissioning of coal mill, preheater, cooler, RMHS,
Beumer Pellet Pack at 5000TPD “YTL Cement Malaysia” From May – 2015 to Sept – 2016.
Technical Purview:-
In field of Electrical
• Testing and commissioning of rotating machines, VVFD drives, LT switchgears
and Maintenance of electrical equipments.
• Electrical / Instrumentation design of cable trays routing, lighting layouts, cable
schedule, MCC / Switch gear room layouts.
• Preventive Maintenance and Troubleshooting of VFDs.
• Maintenance, Calibration and Troubleshooting of Roto Packers, Make Enexco
• Having knowledge of Simocode smart MCC, Conventional MCC, DOL, RDOL feeders and
soft starters.
• I/O Testing of electrical equipments and devices like conveyors safety devices BSS, PCS, ZSS
and Limit switches.
• Preparation of drive list, HT and LT motor list and assistance to preparing the technical
documents for purchasing material.
• Preparation of single line diagrams and detailed control diagrams after the modification in the
projects and sending to design departments for final as built drawings.
• Testing and overhauling of Motors, Transformers and HT switchgears as per Annual
Preventive maintenance Plan.
• Preparation of energy consumption report.
• Good knowledge of control panel wiring, testing and troubleshooting.
• Planning day today jobs and requirements.
In field of Instrumentation:
Commissioning and Maintenance of following instruments
1. Siemens make gas analyzers for measurement of CO, NO, O2
2. Kiln Inlet gas analyzer Sabotta make
3. Auto Sampler FLS make
 Preparation of IO list, testing of signals, documentation and support in logic developments.
 Installation and testing of instruments as per drawings, specifications.
 Commissioning of instruments, signal tests (Digital input / outputs and Analog IO).
 Temperature: RTDs, Thermocouples & temperature transmitters, Pyrometers (Sobatta Make)
 Level Measurement: DP level transmitter, RADAR, Ultrasonic Capacitance type
and laser type
 Flow & Pressure: Pressure transmitters, Intelligent turbine flow meter, Magnetic
flow meters and ultrasonic
 Analyzers: Gas analyzer for measurement of CO, NO, O2 & Siemens make gas
analyzer

3.  Commissioning of FLS sampling system and troubleshooting.
 Material Handling: Load cells, Vibrators & Moisture measurement.
 Good knowledge of valves like Ball, Butterfly, Gate as well as pneumatic
actuators and positioners
 Calibration of Pressure & temperature transmitter, weigh feeders, load cells,
level switch, level transmitter, control valve positioners and analytical system
(Gas Analyzers).
In field of Automation:
 Gained Experience in Basic Engineering of PLC, I/O Lists preparation from P&ID’s, Panels and
Hardware Engineering of SIEMENS S7-200, S7-300 & S7-400 PLC.
 Conversant with tasks related to Short-listing and selection of various automation and networking
equipments (Task specific Processors for PLCDCS System, Interface Cards, network switches,
signal modules etc.)
 Hands on experience in Installation and commissioning of Siemens S7 300, S7 400 System,
troubleshooting and its maintenance.
 Good knowledge on PLC control panels and troubleshooting.
 Knowledge of Programming of PLC using Siemens Simatic Manager, Microwin (IEC Languages
Ladder Logic, FBD)
 Experience in Developing logic, interlock diagrams as per requirement of process operation & client
feedback.
 Good knowledge of Basic communication protocols like HART, Profibus, OFC, Modbus and Ethernet.
Additional Responsibilities:
• Preparation of SOP’s for process Instruments
• Planning of Day to day activities & shutdown jobs
• Identifying critical and non critical equipments and its spares panning
• Scope Trouble shooting, failure analysis of continuous operation equipments
• Spares planning, indenting and follow up.
• Modification, new installation execution, suggestion for improvement.
• Good housekeeping and 5 S auditing activities
Trainings attended
• 2 month of Industrial Automation Training at Automotive Control System, Pune.
Technical Paper Submitted
• Submitted the technical paper on “Economical improvement of power factor by reactive power
compensation”, which was accepted by Xindia Steels Limted, Koppal Karnataka and successfully
implemented the results.
Personal profile:
• Date of Birth : 03 – 05 – 1989
• Gender : Male
• Nationality : Indian
• Passport No. : L6300183
• Marital Status : Single

4. • Religion : Hindu
• Languages known : English, Hindi and Kannada
Present Designation: Engineer (E&I)
Existing CTC:
Expected: Negotiable
(Shetteppa Najjarad)