1. MAINTENANCE, REPAIR AND OVERHAULING CONSUMABLES
PASSIVE FIRE PROTECTION SYSTEMS
EPOXY COATINGS
Cleaners: (Aerosols & Bulks)
Plastic, Varnish & Paint safe Cleaners
Non-flammable online Cleaners
Off-line contact cleaners
Electronic components / PCB cleaners
Residue / Non-residue cleaners
Battery Terminal cleaner
Carbon cleaner
Supreme Electro-Safe Cleaner
Insulation & Protection: (Aerosols, Bulk & Rolls)
Battery Terminal Coating
Red Insulation Varnish
Anti-track coating
Acrylic Conformal coating
Moisture displacing
HT Insulation Tapes, Epoxy coating &
Transformer oil leak repair kits
High build Epoxy Coatings:
Rust preventive
Chemical resistant
Heat Resistant & Abrasion resistant coatings
Floor repair, Screed build-up, floor coating
High Gloss Top coat
Metal Coatings: (Aerosols & Bulk)
Bright Zinc Aluminium Sprays
Bright Aluminium / Stainless Steel Spray
Chrome / Golden Finish Spray
Mechanical Maintenance: (Aerosols, Bulk)
HD Cleaner & Degreaser
Paint & Gasket remover
Bearing cleaning solvent
Die Penetrant Test Kit
Multipurpose Maintenance Fluid
Heavy Duty Rust Penetrant
Rust remover / Rust Converter
Belt dressing
Copper Anti-seize paste
Silicone mould release Spray
High Heat Paint
Passive Fire Protection Systems:
Fire resistant Cable coating
Mortar fire barriers
Wool board barriers & Fire Seal
Metal Rebuild & Repair Epoxies:
Multipurpose Maintenance Epoxy Sealant
Titanium Putty & stick
5 Minute steel repair Putty & stick
Aluminium Putty & Stick
Bronze / Copper Putty & stick
Wet surface repair
High Temp Paste for Bonding /Sealing
/Repairing (Up to 1000º C)
Silicone Sealants:
Neutral grade (Cartridge)
Acetoxy based sealant
PU Foam seal. (Aerosol)

2. MAINTENANCE, REPAIR AND OVERHAULING CONSUMABLES
PASSIVE FIRE PROTECTION SYSTEMS
EPOXY COATINGS
FEATURES, BENEFITS & APPLICATIONS
PC7060 Supreme Safe Sol Cleaner:
 Ultra-high KB value (133 KB) for unmatched cleaning power.
 On-line cleaner. Non residue, Ultra-high dielectric strength (36 KV).
 Fast evaporation. Effectively removes grease, oil, dirt and other contaminants.
 Non-flammable, ozone friendly, CO2 propellant - user & environment safety.
Applications: Cleaning of Bus bars, AC & DC electric motors, lathes, mining equipment,
grease fittings, moulds, Switches, generators, relays and brake linings.
PC7002 Electr-O-Safe Clean (On-Line):
 On-line cleaner, Non Flammable
 Quick Dry, Non Residue cleaner
 Plastic, Paint & Varnish safe cleaner
 Di-electric contact cleaner.
Applications: Switches, Circuit breakers, Electric control panels, motor winding etc.
PC7015 Electrical & Electronic contact cleaner (Off-Line):
 Quick dry, Plastic, Paint & Varnish Safe,
 Residue less - Electrical & Electronic cleaner
 Value for money
 Effectively de-greases & cleans.
Applications: Electrical & Electronic contact cleaning, Off-line cleaning & de-greasing of
electrical systems.
PC7016 Electronic Parts & PCB cleaner:
 Quick dry, non-residue cleaner
 Fully Plastic & Paint safe, non-chlorinated cleaner
 Value for money.
Applications: PCBs cleaning, Precision Electronic components & equipment cleaner,
Telecommunication equipment etc.
PC7026 Electrical Span Maintenance Spray:
 Universal Electrical maintenance tool
 Displaces moisture, improves resistance values
 Cleans, degreases, removes gum & glue
 Protects contacts from carbon deposits
 Prevents corrosion, Lubricates
 Penetrates & released jammed assemblies
Applications: Connectors, relays, switchgears, circuit breakers, motors, generators, electro-
mechanical Equipment, communication systems, opening jammed parts & Assemblies
PBC 60 Precision Safe Sol:
 Non-Chlorinated, Non-Corrosive, Non- Residue 100% Volatile
 High Di-electric strength, High KB Value & High Flash point (About 60°C)
 Ready to use, slow evaporating cleaner de-greaser fluid.
Applications: Cleaning & De-greasing of Motors, Elect Spare parts, Equipment, Bearings,
machine parts, Ultrasonic cleaner fluid.
PBC 61 Precision Kwik Sol:
 Non-Chlorinated, Non-Corrosive, Non- Residue 100% Volatile
 High Di-electric strength, High KB Value & Moderate Flash point (About 40°C)
 Ready to use, moderate evaporating cleaner de-greaser fluid.
Applications: Cleaning & De-greasing of Motors, Elect Spare parts, Equipment,
Bearings, machine parts, Electronic PCBs, Ultrasonic cleaner fluid
P 70 Precision Multi-Cleaner Concentrate:
 Water based, Biodegradable Alkaline cleaner concentrate
 Non-Toxic, Non-Hazardous & Non-Flammable,
 Compatible with most metals, prevents flash rusting
 Dilution with water from 1:5 to 1:100 ratio.
Applications: Cleaning & De-greasing of Machine parts, Spares, Bearings,
Cleaning of Metal & non-metal parts, Glass cleaning (in 1:100 ratio).

3. MAINTENANCE, REPAIR AND OVERHAULING CONSUMABLES
PASSIVE FIRE PROTECTION SYSTEMS
EPOXY COATINGS
FEATURES, BENEFITS & APPLICATIONS
PCC 223 Precision Conformal Coat (UV):
 A clear transparent conformal coating on PCBs.
 Conventional as well as Coating visible under UV light to identify any flaws & take corrective
measures to ensure 100% perfect coating.
 Perfect product to ensure zero error in coating.
 Single compound, fast drying coat, Protects from Humidity, Corrosion & Fungus.
Applications: Insulation of PCB from surrounding (Moisture & Chemical fumes).
.
PIC7084 Precision Red Insul-Varnish Coat:
 Single compound, Flexible coat,
 High Di-electric coat.
 Class F, Max. Usage temperature 155° C.
 For enhancing “IR” value of motors “In-Situ”.
Applications: LT Bus bars, Electric control panels, motor winding etc.
PIC7006 Precision Anti-Track Coat:
 Single compound Tough coat,
 High Di-electric coat.
 Class H, Max. Usage temperature 180° C.
 For enhancing “IR” value of motors “In-Situ”.
Applications: Insulators, LT Bus bars, Electric control panels etc.
PT 7693 Precision Self-Amalgamating Tapes:
 Self-Amalgamating HT Insulation tapes
 High Di-electric strength
 Moisture proof sealing,
 Tape sizes: 18 mm, 25 mm, 38 mm & 50 mm wide, 0.8 mm thick.
Applications: Joining of cables, Lexes insulation, Low pressure pipe leak sealing etc.
PT 7055 Precision Silicone Tapes:
 Self-Amalgamating H class Insulation tapes, Temp up to 180° C
 High Di-electric strength
 Moisture proof sealing,
 Tape sizes: 25 mm wide, 0.5 mm thick.
Applications: Cable joining, Lexes insulation, Moderate pressure pipe leak sealing etc.
PCC 7080 Precision Carbon Cleaner:
 Foamy fluid penetrates carbon, Paint & Varnish loosens the bonding.
 Thin film of coat etches the stubborn deposit & wipe clean.
 Fast acting formula cleans dried grease & oil
 Protects surface finish from excessive scraping.
Applications: Cleaning of burned carbon from panels, Elect Equip., remove paint etc.
PEC 7088 Precision Anti Moist Spray:
 Di-Electric Hydrophobic fluid
 Fluid density >1, penetrates through water & displaces it.
 Fluid coat protect surface from moisture attack.
Applications: Junction boxes, de-moistening of motor winding & other elect equipment. As a
preventive maintenance spray on electrical surfaces to make moisture proof.
PBTC 7005 Precision Battery Terminal Coat:
 An airtight sealing of battery terminal connection from surrounding
 Protects Battery terminal from sulphur and salt deposits.
 Avoids battery malfunction.
Applications: Insulation coat on assembled battery terminals, Electrical equipment,
(Pl. note: PBTC 7011 Battery Terminal Cleaner to be used before application of 7005)
Precision Industrial Metal Sprays:
 For protection from corrosion & appearance.
 Bright Zinc Aluminium Spray – For Bright Cold Galva coat
 Bright Aluminium Spray – For Corrosion prevention.
 Bright Chrome Finish Spray – For Corrosion prevention
 Stainless Steel Spray – For Corrosion Prevention.
 Golden Finish Spray – For Gold / Brass look touch up & Corrosion Prevention

4. MAINTENANCE, REPAIR AND OVERHAULING CONSUMABLES
PASSIVE FIRE PROTECTION SYSTEMS
EPOXY COATINGS
FEATURES, BENEFITS & APPLICATIONS
PLRK 752 Precision Leak Repair Kits:
 Industrial repair kit for quick prevention of oil & gas leaks,
 Kit consists of fast cure Epoxy composite stick & putty, sealant, cleaner reinforcement
fibre tape.
 Perfect kit for maintenance tool room.
Applications: Transformer oil leak repair, Gas pipeline repair, elbow joint reinforcement.
.
PRB 7130 Precision Rust Bust Fluid:
 Penetrates hard-to-reach areas quickly, disperses rust, scale and other oxides.
 Frees metal parts seized by dirt, rust, corrosion or dried-up greasy deposits.
 Eases quick disassembly of mechanical components, fittings, assemblies, nuts and
bolts and other close tolerance fasteners.
Applications: Seized nuts and bolts, Locks and hinges, Equipment disassembly, Corroded
fasteners, Valves, Air tools, Chains and conveyors, Agricultural equipment.
PC790 Precision Multi-use Fluid:
 Penetrates Rust - Loosens jammed threaded assemblies
 Prevents Corrosion – protective oily film bars surface from atmosphere.
 Cleaner & De-greaser – Cleans dirt, dust, grease, wax, Glue/gum, sticker marks.
 Displaces Moisture – Hydrophobic oily film separates moisture from surface
 Lubricates –Lubricates moving parts like hinges etc.
Applications: Overhauling of equipment, Cleaning, degreasing, short term rust protection,
Electrical junction boxes, lubricate moving parts, Cleans Glue marks etc.
PHT 7089 Precision High Heat Aluminium Paint:
 High heat resistant up to 600° C. Good stability of Aluminium colour.
 Single compound ambient temperature curing corrosion resistant paint.
 Good resistant to extreme weather Saline Environment.
Applications: Chimney, DG Set, Blower, Burner, Boiler, Oven, Exhausts, Kiln, Manifold,
Silencer, Radiator steam pipe etc.
Note: Also available paint for 200° C, 400° C & water based coat for 700° C as well.
Precision Repair Epoxies – Sticks & Putties:
 Two part Epoxy putty & Co-extruded composite epoxy stick form.
 For regular Repair, Reclaim, leak Sealing, filling, emergency repairs.
 Wide range of metal & non-metal filled epoxy compounds suitable all substrates.
 Ceramic filled repair compound & abrasion resistant protective coating.
 Steel, Titanium, Aluminium, Bronze, Copper, SS, under-water, Ceramic putties & sticks
available.
Applications: Shaft repair, Cavity filling, Liquid & Gas leakage repairs, Pump repair & abrasion
repair coating, Transformer oil leak arrest etc.
Precision High Build Epoxy coatings:
 Solvent free high build epoxies for protection of Metal & Concrete.
 Concrete & metal clear primers, Zinc based primers for metals.
 Corrosion resistant epoxy, Chemical resistant, abrasion resistant coatings.
 UV resistant & Colour stable Polyurethane coats as top coat.
 HT Insulation coatings for Concrete & Metal surfaces (Primer + Insulation + Top coat)
Applications: Protections of metal & concrete structures from moisture & Chemical fumes,
material storage & water storage tank coating, Electric Panel room floor coating etc.
Precision Passive Fire Protection Systems:
 Intumescent Fire retardant Cable coating
 Mortar based Fire barriers
 Wool Board based Fire barriers
 Fire retardant Sealant.
 Wood fire retardant transparent coatings
Applications: Cable coating, Electric panel room sealing boards, sealing of wall
opening with mortar barrier, Sealing of small gaps with sealant. n
PRECISION MRO SOLUTIONS
KACHIGUDA, HYDERABAD – 500027, TELANGANA STATE
Email: precision.mro@gmail.com , Contact: +91 9989594289