Nanex is an innovative company that develops protective coatings using nano technology. They have multiple product lines for cleaning and protecting different surfaces, including Clean & Coat for non-porous surfaces like glass and metal, Always Dry for absorbent surfaces like textiles and leather, and solvent-based formulas for wood and stone. The products combine nano polymers with solvents or water to penetrate materials on a molecular level, filling imperfections and creating hydrophobic, oleophobic, scratch resistant and self-cleaning surfaces.
This document provides information on IGL Coatings, a company that produces eco-friendly coatings and cleaning products. It introduces IGL's product range including their Ecocoat coating series that uses low or zero VOC formulations. It also describes their Ecoshine cleaning and maintenance line. The document provides details on the features and benefits of each product.
This document describes RAINO-CLEAR, a waterproofing coating for concrete and masonry surfaces. It is a breathable, hydrophobic nano-coating that penetrates pores and reacts chemically to provide durable water repellency without affecting appearance or breathability. It protects against moisture absorption, dirt, dust, salt intrusion and reduces damage from freeze/thaw cycles. The coating is easy to apply, provides long-lasting protection, and maintains surfaces' natural appearance and breathability while repelling water and salts. It also minimizes efflorescence and fungal growth to reduce cleaning costs.
The document discusses properties and applications of rubber. It begins by introducing the group members and providing an overview of natural and synthetic rubber. It then discusses various properties of rubber including its flexibility, elasticity, water resistance and insulation properties. Various applications of rubber are also presented, including use in rubber flooring, adhesives, bearings pads, and expansion joints. The document concludes that both natural and synthetic rubber have many uses in construction and other industries.
7R-NOIL is an industrial degreaser that is biodegradable, safe for use on all metals, and removes grease, oil, sludge, carbon deposits, dirt and grime effectively. It is a unique, new generation water based cleaner that combines an advanced surfactant blend and wetting agents for excellent cleaning power and economy. The product is diluted in water and can be used for cleaning industrial parts, plant bodies, bearings, and removes carbon deposits as an alternative to expensive diesel or kerosene.
A SEMINAR ON THE MANUFACTURING OF PARA RUBBER WHERE YOU GET ALL THOSE INFORMATION ABOUT THE MANUFACTURING .THAT'S SUFFICIENT FOR A SEMINAR IN YOUR SEMINAR
EL Trading Co. is a leading manufacturer of desiccants that strongly absorb moisture. They have exported desiccants to over 20 countries for decades to help control humidity in industries like food and manufacturing. The document discusses several of EL Trading's desiccant products - Double Dry High, Double Dry CM, Double Dry MIL, Double Dry N, and Double Dry S - which use materials like calcium chloride, bentonite clay, and silica gel to absorb moisture. The desiccants are designed to maintain low humidity during transportation and storage to prevent damage to sensitive products like electronics, machinery, and food.
The document discusses rubber, including its properties, types (natural and synthetic), production processes, and applications. It describes how natural rubber is obtained from rubber trees by tapping latex and coagulating it. It also explains various synthetic rubbers like SBR, butyl, EPDM, and nitrile. Key applications mentioned include rubber flooring, adhesives, expansion joints, and bearing pads.
This document discusses the properties and chemistry of alginate impression materials. Alginate sets via a chemical reaction between sodium alginate and calcium sulfate to form insoluble calcium alginate. Additives like retarders and fillers are included to control consistency and setting time. Proper control of water:powder ratio, mixing time, and water temperature is needed to achieve optimal gelation time and avoid distortion of the impression. Alginate is a commonly used irreversible hydrocolloid impression material.
This document provides information on IGL Coatings, a company that produces eco-friendly coatings and cleaning products. It introduces IGL's product range including their Ecocoat coating series that uses low or zero VOC formulations. It also describes their Ecoshine cleaning and maintenance line. The document provides details on the features and benefits of each product.
This document describes RAINO-CLEAR, a waterproofing coating for concrete and masonry surfaces. It is a breathable, hydrophobic nano-coating that penetrates pores and reacts chemically to provide durable water repellency without affecting appearance or breathability. It protects against moisture absorption, dirt, dust, salt intrusion and reduces damage from freeze/thaw cycles. The coating is easy to apply, provides long-lasting protection, and maintains surfaces' natural appearance and breathability while repelling water and salts. It also minimizes efflorescence and fungal growth to reduce cleaning costs.
The document discusses properties and applications of rubber. It begins by introducing the group members and providing an overview of natural and synthetic rubber. It then discusses various properties of rubber including its flexibility, elasticity, water resistance and insulation properties. Various applications of rubber are also presented, including use in rubber flooring, adhesives, bearings pads, and expansion joints. The document concludes that both natural and synthetic rubber have many uses in construction and other industries.
7R-NOIL is an industrial degreaser that is biodegradable, safe for use on all metals, and removes grease, oil, sludge, carbon deposits, dirt and grime effectively. It is a unique, new generation water based cleaner that combines an advanced surfactant blend and wetting agents for excellent cleaning power and economy. The product is diluted in water and can be used for cleaning industrial parts, plant bodies, bearings, and removes carbon deposits as an alternative to expensive diesel or kerosene.
A SEMINAR ON THE MANUFACTURING OF PARA RUBBER WHERE YOU GET ALL THOSE INFORMATION ABOUT THE MANUFACTURING .THAT'S SUFFICIENT FOR A SEMINAR IN YOUR SEMINAR
EL Trading Co. is a leading manufacturer of desiccants that strongly absorb moisture. They have exported desiccants to over 20 countries for decades to help control humidity in industries like food and manufacturing. The document discusses several of EL Trading's desiccant products - Double Dry High, Double Dry CM, Double Dry MIL, Double Dry N, and Double Dry S - which use materials like calcium chloride, bentonite clay, and silica gel to absorb moisture. The desiccants are designed to maintain low humidity during transportation and storage to prevent damage to sensitive products like electronics, machinery, and food.
The document discusses rubber, including its properties, types (natural and synthetic), production processes, and applications. It describes how natural rubber is obtained from rubber trees by tapping latex and coagulating it. It also explains various synthetic rubbers like SBR, butyl, EPDM, and nitrile. Key applications mentioned include rubber flooring, adhesives, expansion joints, and bearing pads.
This document discusses the properties and chemistry of alginate impression materials. Alginate sets via a chemical reaction between sodium alginate and calcium sulfate to form insoluble calcium alginate. Additives like retarders and fillers are included to control consistency and setting time. Proper control of water:powder ratio, mixing time, and water temperature is needed to achieve optimal gelation time and avoid distortion of the impression. Alginate is a commonly used irreversible hydrocolloid impression material.
Alginate is a commonly used impression material that is extracted from brown seaweed. It sets via a chemical reaction when its powder form is mixed with water. The powder contains soluble sodium alginate which reacts with calcium sulfate in the powder to form insoluble calcium alginate. Sodium phosphate is also included as a retarder to increase working time before the reaction occurs. Alginate has advantages of being easy to use, inexpensive, and comfortable for patients. However, it has disadvantages like poor dimensional stability, strength, and accuracy for complex impressions.
This slideshow presents product information and market applications our fine silica products. For more information on any of AGC's products or applications, visit www.agcchem.com
The document provides information on irreversible hydrocolloids, specifically alginate impression materials. It discusses the classification, ideal requirements, and history of alginate. The composition of alginate includes sodium alginate, calcium sulfate, and other ingredients. Alginate sets via a sol-gel reaction as calcium ions crosslink the sodium alginate chains. Properties like working time and setting time are controlled by factors like water temperature. Dimensional changes can occur due to syneresis, imbibition or evaporation. Methods to avoid changes include quick pouring and storage in a humid environment. Strength depends on proper spatulation during mixing.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
TCM Asia product and solutions to clean and protect various kind of surfaces under harsh tropical environment.
TCM provides since 2003 unique coating solution for timber, metal, glass, all kind of natural stones, concrete and much more. TCM Asia consults developer, architects, maintenance companies. hotel engineering and housekeeping in practical solutions to reduce budgets and labor cost.
Poly Plasti-Flex Liquid Plastic is a two part, room
temperature curing (RTV) polyurethane plastic that is slightly flexible
upon cure. The flexibility of this plastic makes it ideal for parts such as
decorative trim molding, props, special effects castings, and impactresistant items.
Neoprene is a synthetic rubber produced by polymerizing chloroprene. It exhibits good chemical stability and flexibility over a wide temperature range. It is used in many applications such as laptop sleeves, orthopedic braces, electrical insulation, and automotive fan belts. Neoprene is produced via free radical emulsion polymerization of chloroprene, which is initiated using potassium persulfate and can be produced as either closed cell or open cell forms. It was invented in 1930 by DuPont scientists and is used today due to its resistance to degradation, making it suitable for applications like gaskets, hoses, and corrosion-resistant coatings.
Natural rubber is a naturally occurring polymer obtained from the latex of rubber trees. It is a cis-1,4-polyisoprene polymer. Latex is extracted from rubber trees by making cuts in the bark. Natural rubber can be emulsion polymerized using Ziegler-Natta catalysts or anionically. It is used to make many products due to its elasticity, strength and chemical resistance including medical gloves, tubing and other medical products. Processing involves compounding, mixing, shaping and vulcanization to introduce crosslinks. Natural rubber is commercially graded according to quality standards.
Use Poly 81-Series rubbers to make firm molds, mold
facings, stamping tools, industrial parts, rollers, gaskets, mold shells,
bumpers or pads. Poly 81-Series rubbers consist of two liquid parts (A
and B), which, after mixing, cure at room temperature to tough, durable
rubbers. They offer low sensitivity to moisture, and low viscosity for easy
mixing and pouring.
Impression materials presentation, comparing all the impression materials with their characteristics and properties. Made for 2nd year dentistry students for pre-clinical dentistry lecture at Palacky University, Olomouc.
This document discusses different types of impression materials used in dentistry, including their properties and uses. It covers elastic materials like alginate, polyether, polysulfide, and silicone impressions that can record undercuts, as well as rigid materials like plaster, wax, and zinc oxide eugenol. Key properties discussed include accuracy, elasticity, dimensional stability, and setting characteristics. Hydrocolloids like alginate provide good detail but poor stability, while synthetic elastomers offer improved tear resistance and stability at the cost of potential allergic reactions or toxicity. Mixture, properties, advantages, and disadvantages are described for each major material type.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
This document provides an overview of dental impression materials. It begins with a brief history of dental impressions and then discusses the ideal requirements and classifications of impression materials. The main types discussed are hydrocolloids like alginate and agar, as well as elastomeric materials like polysulfides, silicones, and polyethers. For each material, the document outlines their composition, setting reaction, properties, manipulation, and advantages/limitations. Causes for impression failure and alternative impression methods like oral scanners are also mentioned before concluding with references.
The document discusses natural rubber, including its importance as a raw material, challenges in its supply, and how it was identified as a critical raw material by the European Commission. Natural rubber comes from rubber trees and makes up approximately 30-40% of latex. It is harvested by making incisions in rubber tree bark to extract the latex. Approximately 70% of rubber used is synthetic which is made from petroleum feedstocks, while natural rubber comes from rubber trees primarily in Southeast Asia where the climate supports rubber tree cultivation.
This document discusses inelastic impression materials, focusing on zinc oxide eugenol (ZOE) impression paste. It describes the composition, setting reaction, properties, uses, and clinical implications of ZOE paste. It also summarizes several research studies related to ZOE paste, including factors that influence setting time, allergic reactions, efficacy of disinfection methods, techniques for implant impressions and bite registration, and the effects of tray design and storage on impression accuracy and stability.
ULTRALIT WORLDWIDE DISTRIBUTION produces premium chemicals for concrete hardening, sealing, repairs and cleaning. Their flagship product is ULTRALIT HARD ECO, a liquid densifier with the highest lithium content in the industry that hardens and dustproofs new or existing concrete floors. The document provides details on the product line including physical properties, applications, and benefits such as fast hardening and increased abrasion resistance. It aims to present the company's range of products to potential customers and distributors.
Reinste Nano Ventures Pvt. Ltd. is an Indian nanotechnology company that develops nano coatings for solar panels to keep them clean. Their transparent nano coating prevents dirt, algae, and bird fouling from sticking to solar panel surfaces. By keeping panels clean, the coating improves efficiency and reduces cleaning costs. It is a water-based formula that forms a protective hydrophobic layer and has self-cleaning properties. The coating allows solar panels to stay cleaner for longer between washings.
Excellent super hydrophobic smart glass coatingMaroof Shah
This document describes a super hydrophobic smart glass coating that provides various benefits when applied to glass surfaces. The coating contains nano particles that are chemically linked into a silicon matrix. When applied, it forms a thin transparent layer that makes the glass water and dust repellent. It also provides UV protection, easy cleaning, anti-bacterial and anti-corrosive properties. The document outlines the application process and test results that show the coating's robust performance and long lifespan. It explains that the inorganic nano particles bond tightly to glass surfaces, providing benefits like easy cleaning, stain resistance and protection from acid rain.
PolyPoxy® Casting Epoxies are pourable, aluminumfilled, heat-resistant, room temperature curing (RTV) systems that are
typically used for heat-resistant tooling, vacuum form tools, injection
and compression molds, RTM and RIM molds, and matched dies.
Alginate is a commonly used impression material that is extracted from brown seaweed. It sets via a chemical reaction when its powder form is mixed with water. The powder contains soluble sodium alginate which reacts with calcium sulfate in the powder to form insoluble calcium alginate. Sodium phosphate is also included as a retarder to increase working time before the reaction occurs. Alginate has advantages of being easy to use, inexpensive, and comfortable for patients. However, it has disadvantages like poor dimensional stability, strength, and accuracy for complex impressions.
This slideshow presents product information and market applications our fine silica products. For more information on any of AGC's products or applications, visit www.agcchem.com
The document provides information on irreversible hydrocolloids, specifically alginate impression materials. It discusses the classification, ideal requirements, and history of alginate. The composition of alginate includes sodium alginate, calcium sulfate, and other ingredients. Alginate sets via a sol-gel reaction as calcium ions crosslink the sodium alginate chains. Properties like working time and setting time are controlled by factors like water temperature. Dimensional changes can occur due to syneresis, imbibition or evaporation. Methods to avoid changes include quick pouring and storage in a humid environment. Strength depends on proper spatulation during mixing.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
TCM Asia product and solutions to clean and protect various kind of surfaces under harsh tropical environment.
TCM provides since 2003 unique coating solution for timber, metal, glass, all kind of natural stones, concrete and much more. TCM Asia consults developer, architects, maintenance companies. hotel engineering and housekeeping in practical solutions to reduce budgets and labor cost.
Poly Plasti-Flex Liquid Plastic is a two part, room
temperature curing (RTV) polyurethane plastic that is slightly flexible
upon cure. The flexibility of this plastic makes it ideal for parts such as
decorative trim molding, props, special effects castings, and impactresistant items.
Neoprene is a synthetic rubber produced by polymerizing chloroprene. It exhibits good chemical stability and flexibility over a wide temperature range. It is used in many applications such as laptop sleeves, orthopedic braces, electrical insulation, and automotive fan belts. Neoprene is produced via free radical emulsion polymerization of chloroprene, which is initiated using potassium persulfate and can be produced as either closed cell or open cell forms. It was invented in 1930 by DuPont scientists and is used today due to its resistance to degradation, making it suitable for applications like gaskets, hoses, and corrosion-resistant coatings.
Natural rubber is a naturally occurring polymer obtained from the latex of rubber trees. It is a cis-1,4-polyisoprene polymer. Latex is extracted from rubber trees by making cuts in the bark. Natural rubber can be emulsion polymerized using Ziegler-Natta catalysts or anionically. It is used to make many products due to its elasticity, strength and chemical resistance including medical gloves, tubing and other medical products. Processing involves compounding, mixing, shaping and vulcanization to introduce crosslinks. Natural rubber is commercially graded according to quality standards.
Use Poly 81-Series rubbers to make firm molds, mold
facings, stamping tools, industrial parts, rollers, gaskets, mold shells,
bumpers or pads. Poly 81-Series rubbers consist of two liquid parts (A
and B), which, after mixing, cure at room temperature to tough, durable
rubbers. They offer low sensitivity to moisture, and low viscosity for easy
mixing and pouring.
Impression materials presentation, comparing all the impression materials with their characteristics and properties. Made for 2nd year dentistry students for pre-clinical dentistry lecture at Palacky University, Olomouc.
This document discusses different types of impression materials used in dentistry, including their properties and uses. It covers elastic materials like alginate, polyether, polysulfide, and silicone impressions that can record undercuts, as well as rigid materials like plaster, wax, and zinc oxide eugenol. Key properties discussed include accuracy, elasticity, dimensional stability, and setting characteristics. Hydrocolloids like alginate provide good detail but poor stability, while synthetic elastomers offer improved tear resistance and stability at the cost of potential allergic reactions or toxicity. Mixture, properties, advantages, and disadvantages are described for each major material type.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
This document provides an overview of dental impression materials. It begins with a brief history of dental impressions and then discusses the ideal requirements and classifications of impression materials. The main types discussed are hydrocolloids like alginate and agar, as well as elastomeric materials like polysulfides, silicones, and polyethers. For each material, the document outlines their composition, setting reaction, properties, manipulation, and advantages/limitations. Causes for impression failure and alternative impression methods like oral scanners are also mentioned before concluding with references.
The document discusses natural rubber, including its importance as a raw material, challenges in its supply, and how it was identified as a critical raw material by the European Commission. Natural rubber comes from rubber trees and makes up approximately 30-40% of latex. It is harvested by making incisions in rubber tree bark to extract the latex. Approximately 70% of rubber used is synthetic which is made from petroleum feedstocks, while natural rubber comes from rubber trees primarily in Southeast Asia where the climate supports rubber tree cultivation.
This document discusses inelastic impression materials, focusing on zinc oxide eugenol (ZOE) impression paste. It describes the composition, setting reaction, properties, uses, and clinical implications of ZOE paste. It also summarizes several research studies related to ZOE paste, including factors that influence setting time, allergic reactions, efficacy of disinfection methods, techniques for implant impressions and bite registration, and the effects of tray design and storage on impression accuracy and stability.
ULTRALIT WORLDWIDE DISTRIBUTION produces premium chemicals for concrete hardening, sealing, repairs and cleaning. Their flagship product is ULTRALIT HARD ECO, a liquid densifier with the highest lithium content in the industry that hardens and dustproofs new or existing concrete floors. The document provides details on the product line including physical properties, applications, and benefits such as fast hardening and increased abrasion resistance. It aims to present the company's range of products to potential customers and distributors.
Reinste Nano Ventures Pvt. Ltd. is an Indian nanotechnology company that develops nano coatings for solar panels to keep them clean. Their transparent nano coating prevents dirt, algae, and bird fouling from sticking to solar panel surfaces. By keeping panels clean, the coating improves efficiency and reduces cleaning costs. It is a water-based formula that forms a protective hydrophobic layer and has self-cleaning properties. The coating allows solar panels to stay cleaner for longer between washings.
Excellent super hydrophobic smart glass coatingMaroof Shah
This document describes a super hydrophobic smart glass coating that provides various benefits when applied to glass surfaces. The coating contains nano particles that are chemically linked into a silicon matrix. When applied, it forms a thin transparent layer that makes the glass water and dust repellent. It also provides UV protection, easy cleaning, anti-bacterial and anti-corrosive properties. The document outlines the application process and test results that show the coating's robust performance and long lifespan. It explains that the inorganic nano particles bond tightly to glass surfaces, providing benefits like easy cleaning, stain resistance and protection from acid rain.
PolyPoxy® Casting Epoxies are pourable, aluminumfilled, heat-resistant, room temperature curing (RTV) systems that are
typically used for heat-resistant tooling, vacuum form tools, injection
and compression molds, RTM and RIM molds, and matched dies.
- PolyPoxy® Epoxy Adhesives are two-component, room-temperature curing epoxy systems for general bonding and tooling board adhesion.
- PolyPoxy® 9024 is a fast-set epoxy with a color indicator to ensure proper mixing. PolyPoxy® 5003 has a longer pot life and is recommended for general in-shop use.
- The epoxies require thorough mixing of the resin and hardener components, application in thin layers, and curing at room temperature for the specified handling time.
Green Life Group has developed a cleaning product called Blue Sky that safely cleans grease, oil, and dirt from floors without contaminating water systems. The product breaks down hydrocarbons in runoff to make it safe for drainage. Green Life Group seeks to lead the market in providing environmentally friendly cleaning products that protect both the environment and human health. Their line of Green Up products safely and effectively clean a wide range of surfaces while being biodegradable and reducing exposure to toxic chemicals.
Green Life Group has developed a cleaning product called Blue Sky that safely cleans grease, oil, and dirt from floors without contaminating water systems. The product breaks down hydrocarbons in runoff to make it safe for drainage. Green Life Group sees its role as a leader in developing green products that protect the environment and human health. Its line of Green Up products are concentrated cleaners and sterilizers that are biodegradable, non-toxic alternatives to traditional chemicals.
This document provides information on Ermine Wood Coatings produced by Sansui Paints. It begins with an overview of the company's standard industrial wood finish product range and notes customized options are available. Later, it focuses on Ermine, a natural finish coating that enhances wood grain while protecting from heat, water and climate. Ermine Liau is introduced as a water-borne coating for exterior wood furniture that is environmentally-friendly and offers advantages over solvent-borne products like fungicides and ease of use. The document concludes by listing Sansui Paints' wood coating product lines including waterborne lacquers, polyurethane coatings, and stains.
Vimasol Product Catalogue - The Value of CleanEdward Callo
This document provides information on various cleaning products from Nextek International, including their purposes, formulations, and product codes. It discusses Nextek's mission to help customers improve productivity and profitability. It also explains their quality assurance process and that their products are environmentally friendly.
The document describes Ecoworks Marine's line of sustainable cleaning products for yachts and superyachts. The products are formulated with naturally derived ingredients and are biodegradable, phosphate-free, and compliant with IMO MARPOL regulations to minimize environmental impact. The products can clean surfaces like fiberglass, teak, engines, fabrics, glass and more while tackling dirt and stains.
The document describes a range of sustainable cleaning products for yachts and superyachts called Ecoworks Marine Preserve the Living Seas. The products are formulated with naturally derived ingredients and are IMO MARPOL compliant. They include cleaners for boat washing, teak decks, bilges, engines, surfaces, laundry, dishwashing and more. The products aim to reduce the environmental impact of boat cleaning.
This document summarizes a water dilutable waterproofing compound that offers a low VOC alternative to solvent-based compounds. It produces coatings with excellent water and chemical resistance when fully cured. The compound has good adhesion to various substrates and provides corrosion resistance, water resistance, and chemical resistance. It can be diluted with water and applied by brushing to building terraces or roofs for waterproofing.
This document summarizes a photocatalyst coating product called ecotio2 that provides self-cleaning and air-purifying benefits for buildings and infrastructure. The coating uses titanium dioxide and natural light to break down pollutants and prevent dirt, stains, mould and mildew from accumulating on surfaces. Examples are given of projects where ecotio2 has been applied, including a surf lifesaving club building and outdoor paving, reducing maintenance needs. Benefits highlighted include lower cleaning costs, sustainability, and helping meet air quality and corporate social responsibility goals.
Micronisers developed Nanokote coatings to provide easy cleaning and protection for glass surfaces like shower screens. Nanokote coatings use nanotechnology to create a durable hydrophobic surface that causes water and other liquids to bead up and run off, keeping surfaces cleaner for longer. The invisible Nanokote coating is scratch resistant and lasts up to 10 years, reducing cleaning needs by 90% and saving water, time and cleaning chemicals.
This document provides information on Renner Italia's Aquaris line of water-based coatings for interiors. It discusses the product range which includes stains, base coats, top coats, and UV products. It also covers topics such as substrate preparation, binders, glazes, the tintometric tinting system, and coatings for parquet flooring. The coatings are designed to protect and beautify furniture and wood surfaces while being environmentally friendly and easy to apply.
Lino pfgh high performance, high gloss solution, bee chems,indiabeechemsindia
Lino PFGH is a high-gloss, high performance floor protectant ideal for newly polished concrete, stone, and terrazzo surfaces. It offers deep penetration, increased surface hardness, and superior reflectivity. The product is applied and burnished onto the surface, leaving an extremely glossy finish with excellent durability. The reactive nano lithium creates a protective microfilm that increases protection and gloss with less labor compared to other products. Maintenance of the treated surfaces involves routine cleaning without harsh chemicals.
- PolyPoxy epoxy clays are two-component, room temperature curing systems that form a soft dough-like consistency when mixed and cure to a hard solid.
- They offer an accurate and efficient method for duplicating shapes and engineering changes can be made more easily compared to laminated shapes.
- The epoxy clay is applied in layers up to 2 inches thick and allowed to cure at room temperature before use. Applying too thick can cause warping or fire due to the exothermic curing reaction.
Agrotextiles are textiles manufactured for agricultural applications such as agriculture, horticulture, and animal husbandry. They are used to control the environment for plants and animals. Recent developments in agrotextiles include polymer fibre balls as a soil substitute, screening fabrics for sunlight management, knitted net hoses for water transportation, superabsorbent polymer fibre mats for water management, and composites of hemp or polypropylene for reducing soil pollutants. For agrotextile products to be effective, they require properties such as resistance to solar radiation, weather, ultraviolet radiation, the ability to retain water, biodegradability, light weight, and resistance to microorganisms.
2. N
NANEX PRODUCTS
Textiles & Leathers Solvent
Water Based for Textiles
Wood & Stone Solvent
Concentrated Cleaning Agent
Liquid Shield
• PG4
• PG5
• PG6
• PG7
• PG8
becomeanauthorisedreseller
anex is a young, but innovating company with headquarters in
Maldegem.
We are specialized in the development and production of protec-
tive coatings based on nano technology. Therefore, we collabora-
te with specialists within our organisation, but also with develo-
pers and companies within this industry worldwide.
Our products are composed in the most ecofriendly manner and
are well known for their superior quality and unique properties.
Going from making a surface water and oil repellent to the appli-
cation of anti-scratch layers or self cleaning components, which
significantly reduce the maintenance needed afterwards.
We strongly believe that our passion and the possibility of using
nano technology within the chemical industry is rapidly changing,
resulting in a range of brand-new products which offer a greater
added value to the end users.
3. Clean & Coat Product Line
Clean & Coat is Nanex Company’s nano-cleaner product line developed for
use on any non-porous surface, cleaning and protecting glass, metals, and
painted surfaces. Treatment with the Clean & Coat nano-cleaner formulas
provides cleaner surfaces lasting 300% longer than regular cleaners, as well
as advanced scratch protection, and hydrophobic abilities.
Nanex’s Clean & Coat formulas contain nano polymers that penetrate
microscopic fissures and fill surface imperfections creating an ultra-smooth
finish that prevents fat, dirt, and lime scale from sticking.
The Clean & Coat formulas are an ideal solution for the maintenance and
upkeep of any glossy surface from household appliances and glass, to
automotive and marine applications.
Always Dry Product Line
Always Dry is Nanex’s super-hydrophobic product line developed for use on any absorbent
surface, including textiles, leathers, wood, or stone.
Through the use of Nano polymers Always Dry is able to bond with any absorbent material
on a molecular level and create an ultra-thin layer causing a super-hydrophobic effect where
fluid beads and rolls off the surface .
The advantages of our method are that the material maintains its full breathability and while
the beading effect wears off over the same period of time as other formulas, Always Dry
continues to protect below the surface.
The Always Dry formulas are available in water based, and solvent based formulas for textiles
and leathers of any kind. Our third Always Dry formula is reinforced with nano-scale additives for
the prevention of growth of micro-organisms (green) on the surface of outdoor wood and stone.
www.alwaysdry.net4 5
4. Textiles & Leathers Solvent
Often referred to by its retail name, Always Dry textile and leather is Nanex
Company’s solvent based super-hydrophobic formula developed with
a focus on ease of use and the end consumer. Solvents allow for a wide
range of application methods, and labour-free drying processes that provide
convenience levels necessary to the average consumer.
In the past many solvents have garnered a negative reputation for being
environmentally harmful or toxic. Always Dry, however, utilizes alkane
isoparaffins, a mixture of hydrocarbons (mineral oils), as the formula’s solvent
base. This maintains the formula’s eco-friendly status.
Always Dry Textile and Leather formula is highly sensitive to laundry and other
detergents. We recommend to wash items treated with this formula only with
warm water without detergents.
IDEAL APPLICATIONS
All textiles / all leathers / suede /
(shoes, bags, outdoor & travel,
sports.)
AVERAGE COVERAGE PER LI-
TRE
Textiles 6-8m2
/ Suede 10-15m2
/
Leather 15-20m2
SHELF LIFE
2 years from day of order
DURABILITY
18 months – 2 years
APPLICATION METHOD
Uniform spraying or dipping
systems in order to apply the
product evenly to the surface.
(HVLP-sprayers, aerosols, HDPE
trigger sprayers, industrial spra-
ysystems.)
Can be air or heat dried
www.alwaysdry.net6 7
5. Water Based for Textiles
For use with textiles only, a less general purpose formula can be ideal as
textiles are extremely absorbent. This allows a strictly water based formula to
be utilized, as plush materials such as sofas and carpeting will absorb all of the
water along with the coating attached, providing deep penetrating protection.
This formula is strongly recommended for textiles/fabrics which are frequently
washed or exposed to chemical cleaners.
Nanex’s water based super-hydrophobic formula is generally recommended
as a product to be distributed through business channels to the service
industry where cleaning services or the protection of linens and furniture are of
the utmost importance.
IDEAL APPLICATIONS
Sofas and other furniture textiles /
Linens / Carpeting and area rugs
AVERAGE COVERAGE PER LI-
TRE
5 – 8 m2 per litre recommended
SHELF LIFE
2 years from day of order
DURABILITY
The textile coating with applica-
tion of heat can give protection
for up to 4 years and can withhold
10 – 20 washes
APPLICATION METHOD
Spray directly on the surface or
apply by dipping.
24 hours to dry / use heat to de-
crease drying times and get bet-
ter results (normal ironing is ap-
propriate also.)
8 9www.nanexcompany.com
6. Wood & Stone
Solvent
Nanex’s wood and stone super-hydrophobic formula
is a water- and oil repellent impregnation product.
As a solvent based micro emulsion of fluorpolymers
with emulsion stabilizers, it is uniquely designed for
wood and porous natural stones such as limestone,
sandstone, terrazzo, and more.
The wood and stone formula contains additional
nano-scale additives with anti-algae, anti-fungi, anti-
bacteria and UV-blocking properties which do not
dissolve in water. This gives a long term protection
against the formation of water sensitive bacteria,
mould and algae in outdoor environments.
IDEAL APPLICATIONS
Exterior & interior wood and
stone surfaces / Wooden patio
furniture / Pool side wood and
stone
AVERAGE COVERAGE PER
LITRE
8 – 14 m2
per litre depending on
the absorbency of the substrate
SHELF LIFE
2 years from day of order
DURABILITY
2-3 years protection before de-
crease in intensity and reapplica-
tion is recommended.
APPLICATION METHOD
Directly apply with a brush, or
with a spray system ( gardener
pump sprayer appropriate )
No HVLP – sprayer is needed for
applying this product
Drying time requires 24 hours
treated
untreated
treated
untreated
treated untreated
10 11www.nanexcompany.com
7. Stone
cleaner & sealer
AD for stones is a specialised water based coating
that when applied removes all the green and dirt from
the surface, it develops a Nano layer that is water
repellent and prevents from algea or green to form
again for up to 2 – 3 years !
Self-cleaning effect:
This product contains unique Nano particles that by
combination of photo catalyse and the environment
will result in a chemical reaction that breaks down dirt
and green and keeps the surface clean.
This self-cleaning effects is on-going up to 2 – 3 years
and will keep the surface as new !
IDEAL APPLICATIONS
Outside stone structures best
use on porous and unpolished
natural stones.
Can also be used on outside
wood surfaces but solvent based
product is more recommended.
Patios, concrete, driveways,
roads …
AVERAGE COVERAGE PER
LITRE:7,5 to 10m2
coverage
/ liter depending on the
absorbance off the surface and
how much dirt/green is present.
DURABILITY
Up to 3 years depending on the
environment.
APPLICATION METHOD
Pump sprayer, back sprayer,
other spray systems
Additional info:
shake before using
treated
untreated
untreated
treated
untreated treated
12 13www.nanexcompany.com
8. IDEAL APPLICATIONS
Automotive and marine bod-
ies / Solar panels / Exte-
rior window and metal treat-
ments / Bathroom ceramics
and shower cabins/tiles.
SHELF LIFE
2 years from day of order
DURABILITY
3-4 months before protection
layer is gone
APPLICATION METHOD
Mix 20-30ml with 5l of water
and apply the product with
a sponge, directly after ap-
plying rinse the surface with
water. Let air dry
Concentrated Cleaning Agent
The Clean & Coat concentrated cleaning agent is a nano-cleaner with an
active protection layer. This cleaner can be used on all non-porous and
smooth surfaces.
The concentrated cleaning agent formula contains a Nanopolymer with
water and dirt repellent, anti-static properties and cleans with a deep shine.
Once treated surfaces can be cleaned using no more than a damp cloth or
water. This significantly decreases the need for expensive and often abrasive
detergents.
This product reduces the cleaning frequency and cleaning time after
application.
Due to the anti-static and non-sticking properties, less dirt will stick to the
surface. In addition, the Clean & Coat concentrated cleaning agent provides
a limited amount of hydrophobic and oleophobic properties.
14 15www.nanexcompany.com
&
9. IDEAL APPLICATIONS
Shower tiles/ ceramics/ ma-
rine bodies / Solar panels /
Exterior window and metal
treatments
AVERAGE COVERAGE
PER LITRE
5 – 8 ml / m2
recommended
SHELF LIFE
2 years from day of order
DURABILITY
8 to 12 months depending
on environment>pre-treat-
ment with Clean & Coat
concentrated cleaning
agent will extend the dura-
bility.
APPLICATION METHOD
Spray directly on the sur-
face then rub with a non-ab-
sorbent towel The product
can be easily spread over
the surface and you will see
if more product needs to be
applied by the shiny gloss
effect of the product.
30 minute air drying time,
but additional results if left
for maximum 3 days.
Clean & Coat Liquid Shield
Clean & Coat, Liquid shield is a nano coating that bonds to
smooth, non-absorbent surfaces and gives long lasting protection
from dirt, oil, and even scratches. Due to the high water repellent
properties, the surface is protected against corrosion and has
self-cleaning activity.
Liquid shield is a water-based formulation, free from silicones
and chemical solvents. The components are safe for humans,
biodegradable and as such form no burden for the environment.
This unique formula is the peak example of commercialized
nano-coatings, providing advanced results with little hands-on
effort, and zero risk.
www.nanexcompany.com16 17
LIQUID SHIELD
&
10. 1918 www.nanexcompany.com
IDEAL APPLICATIONS
all kinds of stone and wood
structures.
markers, and ink on smooth and
sensitive surfaces and on mineral
substrates.
AVERAGE COVERAGE PER
LITRE
8 – 10m2 per litre recommended.
DURABILITY
It will last up to 10 years. Once
the coating is applied only the gel
is needed for further cleaning, the
cycle of reapplying the coating
should be around 2 years.
APPLICATION METHOD
The coating is directly apply with
a pump sprayer and the Cleaner
with a brush.
Anti – graffiti coating
is a colorless impregnation agent and
It contains specialized nano polymers, but this particular formula has
additional polymers and particles added in order to provide superior
protection against heavy pollution and acid rain. It should be used in
markers, and ink on smooth and sensitive surfaces and on mineral
coating on smooth surfaces named above. The cleaner can be
washed away with water causing no harm to the environment, the
product also does not contain heavy acids that damage the surface.
treated
treated
treated
10L Cleaner25L Coating
11. 2120 www.nanexcompany.com
IDEAL APPLICATIONS
All vehicle bodies and wheel
types.
AVERAGE COVERAGE PER
LITRE
10ml / m2 recommended.
SHELF LIFE
2 years from day of order.
DURABILITY
Up to 1 year protection
recommended reapplication 4
months.
APPLICATION METHOD
Spray directly on surface and
spread with a non-absorbent
cloth. After application, polish
Additional Info:
Shake before using.
Car Body and
Yacht Coating
Car Body And Yacht Coating is a water based
product containing a combination of nano
polymers that bond with the surface and develop
an ultra-thin protective layer. After one hour
of drying time the product will be active, and
show the following properties. A High gloss/
polish effect that stays for a long period of
time, making your car look like it’s just washed
and shiny for much longer than other products.
This combination of properties produces high self-
cleaning results when exposed to water or rainfall.
untreated
treated
Car Body
& Yacht
Coating