Mohamed Ahmed Tawfik Farag is an Egyptian instrumentation and control engineer with over 11 years of experience. He has a B.Sc. in electronics engineering from Mansoura University and is proficient in English, Arabic, Windows, MS Office, and using the internet. His experience includes working as an instrumentation engineer for Advanced Electronic Engineering Company and currently at United Gas Derivatives Company, where he maintains and troubleshoots instrumentation and control systems including PLCs, DCS, fire and gas systems, and more.

1. 1
In the name of Allah, the Beneficent, Merciful
PERSONAL DATA
Name : Mohamed Ahmed Tawfik Farag
Date of birth : 1/8/1980
Job name : Instrument and Control Engineer
Nationality : Egyptian
Marital Status : Married
Military Service : Completed
Language : Arabic (native language) & English (v. good)
Qualifications : B.Sc. in Electronics Engineering
Year : MAY 2002
University : Mansoura University
Department : Electronics Engineering (Computer and control system)
Project : Formatting &Packing petroleum pipes using PLC.
Project Grade : Excellent
Final Grade : Good
Permanent address : Dikirns, Mansoura, Dakahliya - Egypt
Telephone : 050-6570133 & Mobil: 01008456080
E-mail : Mtawfik@UGDCO.com
: Mohamed.Tawfik80@yahoo.com
Computer Skills:
- Very good t in Windows and MS-Office
- Very good in using the internet
- Very good in PC installation and maintenance
Experience:
- 11 years in Instrumentation and Control Systems
Last job:
- Instrument & Control Engineer at NGL plant
Training course:
-Measurement and control
-Risk Assessment & Management
Solar technical training:
 Principle operation procedures comprising SOLARMARS 100 GAS TURBINE GENERATORSETS
 TT4 control systemoperation Comprising Turbotronic 4 control systemoperation
 Analytic Troubleshooting comprising Turbotronic 3 & 4 troubleshooting
NOTE:
-I have no problem to relocate inside or outside Egypt.
 -I am self-motivated and can work hard for long hours.

2. 2
WORK EXPERIENCE
1-From July 2005 to 20/5/2008, working in Advanced Electronic Engineering Company (AEE) as an
Instrumentation and Control Engineer especially the following:-
1-Process controllers: - Especially (EUROTHERM, HONYWELL, JUMO, ASCON, EMKO)
2-AC/DC Speed controllers: - Especially (EUROTHERM, SIEMENS, ABB, TELEMECHANIQUE, FUJI
3-Leve measurement:-Especially VEGA
4-Temperature controllers:- Especially (ASCON, HONEYWELL, EUROTHERM , JUMO,EMKO).
5-Electical counters, Timers & Frequency meters. - Especially Kubler
2- From 21/5/2008 till now, working at NGL Plant (United Gas Derivatives Company “UGDCO”) as an
Instrumentation and Control Engineer through EMC Company.
1-PLC Experience:
 Modification and Trouble Shooting for Koyo PLC, Mitsubishi PLC
 Modification and Trouble shooting for Allen Bradley PLC (PLC5, RSlogix5 & SLC500,
RSlogix500 & RSlogix5000)
2-Fire and gas system:
 Install and Commissioning with INVENSYS Rep. new F&G system
(Triconex) in UGDCO at Damietta site.
 Modification and Trouble Shooting for Triconex PLC (Translation 1131,Version 4.1)
3-ESD system:
- Good handling with ESD systems HIMA H51q ELOP II engineering tool, and troubleshooting.
4-DCS:
-Good handling with DCS FOXBORO I/A series, Historical trends, System alarms, and troubleshooting.
5–F&G system:
A- Responsible for Maintenance and Trouble Shooting of Fire & Gas Sys., which include the following:
 Control System used to monitor field mounted industrial Gas Detector.
 The systems include Engineering Card, Control Card and Fields Interface Card.
B- Responsible for maintenance and troubleshooting the following Instruments:
 Gas Detector: (DET-TRONICS)
 Hydrogen Gas Detector .(DET-TRONICS)
 Fire Detector:
a- Smoke Detector b- Heat Detector
c- Heat Detector d- UV/IR Flame Detector (DET-TRONICS)
E- Manual Call Point
 Annunciation Devices
a- Sounder b- Siren (Motor Driven)
c- Fire Alarm Beacon
 Fire Detector Used For Diesel Generator:
a- Heat Detector b- Manual Release
c- Solenoid and Co2 Cylinder
D- FM-200 system
6-Gas Plant Experience:
 Installation, Maintenance and Troubleshooting of Isolating Signal Barrier
 Review and Check Cause and Effect with Function Logic Program
 Loop Check from Field to PC (Engineering Computer).
 Check all Signals Connected between DCS and Field.
 Follow up shipment loading activities at UGDCO facilities.

3. 3
 Maintenance, Trouble Shooting Calibration for ENRAF (ATG) Automatic Tank Gauge for
propane Tank
 Maintenance And Trouble Shooting for Utility Area of Gas Plant which include the following
packages:
1. Instrument Air Compressor
2. Instrument Air Dryer
3. Nitrogen Unit
4. Fire Fighting System Which Include The following:
a. Two Water Jockey Pumps
b. Two Water Diesel Pumps
c. Three Deluge systems
d. Two Elevated monitors
 Maintenance and Trouble Shooting for Flare System
 Bentley Nevada System Model 3300 for Protection Compressor from Temperature, Vibration
and velocity
7- Solar Turbine Experience:
1. Principle operation procedures comprising SOLARMARS 100 GAS TURBINE GENERATOR SETS
2. TT4 control systemoperation Comprising Turbotronic 4 control systemoperation
3. Analytic Troubleshooting comprising Turbotronic 3 & 4 troubleshooting
4. Carry out 4.000 & 8.000 Hour PM and overhauling maintenance (Inst. Tasks).
8- Calibration, Troubleshooting major overhauling Maintenance of the Following Instruments:
1. Control Valves (ABB, Fisher, Masoneilan) with its positioner control and pressure
regulator.
2. ESD Control Valves (ON/OFF Valves)
3. Pressure safety relief (PSV)
4. Pressure, Flow, Level, Temperature Switches
5. Pressure, Flow and Temperature Chart recorder
6. Pressure Transmitters (Fisher Rosemount, Honeywell &Yokogawa)
7. Flow Transmitters:
 Orifice Type (Fisher Rosemount & Yokogawa).
 Vortex Type (Fisher Rosemount &Yokogawa).
 Ultrasonic Type (Panametric)
 Turbine Flow meter
8. Temperature Transmitters (Fisher Rosemount)
9. Level Transmitters
o Differential Pressure Type (Fisher Rosemount).
o Displacement Type (Fisher Rosemount& Foxboro).
10. Electro-Pneumatic Transducers I/P
11. Isolating Signal Transmitters
12. MTL 700 Series Shunts Diode Safety Barrier
13. UV/IR Flame Detectors
14. Vibration Switches
9-Check Spare Parts and Review Stock level on Maximo
10- Completed work orders and review Stock level on Maximo