Module 2 lesson 23
•
1 like•727 views
The document is about Module 2 Lesson 23 which aims to teach solving equations using algebra. It provides an example word problem about Susan and Bonnie shopping for shirts where Susan thinks she can buy 3 shirts but Bonnie thinks 5. They set up equations to model the problem and students must solve the equations algebraically to determine who is correct. The document also contains sample homework answers and discusses how to translate word problems into algebraic equations.
Report
Share
Report
Share
Download to read offline
Recommended
Molude 1 lesson 3
This document contains notes from a math lesson on identifying proportional and non-proportional relationships in tables. The lesson notes include examples of determining whether relationships shown in tables are proportional or not based on whether the y-values can be determined by multiplying the x-values by a constant. Students worked through examples in pairs and completed an exit ticket to assess their understanding before leaving the lesson.
Solving routine and non routine problems involving multiplication without or ...
This document contains a demonstration on teaching mathematics involving operations with decimals, percentages, and word problems. It includes examples of identifying numbers to satisfy mathematical expressions, solving word problems involving addition, subtraction, multiplication and division of decimals and percentages, analyzing word problems to identify the key information needed to solve them, writing mathematical equations from word problems, and checking answers. The document emphasizes correctly analyzing word problems before writing equations and calculating answers.
Routine and non routine problems
This document discusses and provides examples of routine and non-routine problem solving. Routine problems involve using arithmetic operations to solve practical problems and have clear, straightforward procedures. Non-routine problems require more creativity, originality, and higher-order thinking skills as they may have multiple solutions or approaches that are not immediately obvious. Ten examples are given that illustrate the differences between routine and non-routine problems of increasing complexity.
Day 16 relative error
This document discusses relative error and how to calculate it. It provides examples of measuring lines and quantities and calculating the relative error compared to the actual value. Students are asked to measure lines and quantities and find the relative error. They are given think-pair-share practice problems calculating relative error for various measurements, like the sugar content in bubble gum being 1.7g measured but actually 3g. Homework and a cumulative review sheet are assigned.
Module 4 lesson 17
This document outlines a math lesson on mixture problems. It includes homework assignments, questions about mixtures of pure juice and water, and a closing discussion of the structure of mixture problem expressions and the differences between mixture and population problems. The lesson aims to teach students how to solve problems involving mixtures of substances.
End of module activity
The document outlines the end of module activity which includes taking module 2 home to file it, completing the exit ticket from lesson 23 as the do now activity, and reviewing the module over 10 notebook pages to conclude the lessons.
Module 3 lesson 23
This document appears to be notes from a math lesson on finding the volume of right prisms. It includes the homework assignment, which is to solve problems 1a, 3a, and 5 from problem set 23. The lesson discusses using the formula Volume = Base x Height, where the base is the area of the two-dimensional base of the prism. It provides examples of solving for the height of various right prisms given their volume and base dimensions.
Module 3 lesson 11
The document appears to be notes from a math lesson on angle problems and solving equations. It provides the date of the lesson, lists the homework and an upcoming exam. There are worked examples of homework problems and exit ticket solutions. It also addresses how to create equations from diagrams involving angles.
Recommended
Molude 1 lesson 3
This document contains notes from a math lesson on identifying proportional and non-proportional relationships in tables. The lesson notes include examples of determining whether relationships shown in tables are proportional or not based on whether the y-values can be determined by multiplying the x-values by a constant. Students worked through examples in pairs and completed an exit ticket to assess their understanding before leaving the lesson.
Solving routine and non routine problems involving multiplication without or ...
This document contains a demonstration on teaching mathematics involving operations with decimals, percentages, and word problems. It includes examples of identifying numbers to satisfy mathematical expressions, solving word problems involving addition, subtraction, multiplication and division of decimals and percentages, analyzing word problems to identify the key information needed to solve them, writing mathematical equations from word problems, and checking answers. The document emphasizes correctly analyzing word problems before writing equations and calculating answers.
Routine and non routine problems
This document discusses and provides examples of routine and non-routine problem solving. Routine problems involve using arithmetic operations to solve practical problems and have clear, straightforward procedures. Non-routine problems require more creativity, originality, and higher-order thinking skills as they may have multiple solutions or approaches that are not immediately obvious. Ten examples are given that illustrate the differences between routine and non-routine problems of increasing complexity.
Day 16 relative error
This document discusses relative error and how to calculate it. It provides examples of measuring lines and quantities and calculating the relative error compared to the actual value. Students are asked to measure lines and quantities and find the relative error. They are given think-pair-share practice problems calculating relative error for various measurements, like the sugar content in bubble gum being 1.7g measured but actually 3g. Homework and a cumulative review sheet are assigned.
Module 4 lesson 17
This document outlines a math lesson on mixture problems. It includes homework assignments, questions about mixtures of pure juice and water, and a closing discussion of the structure of mixture problem expressions and the differences between mixture and population problems. The lesson aims to teach students how to solve problems involving mixtures of substances.
End of module activity
The document outlines the end of module activity which includes taking module 2 home to file it, completing the exit ticket from lesson 23 as the do now activity, and reviewing the module over 10 notebook pages to conclude the lessons.
Module 3 lesson 23
This document appears to be notes from a math lesson on finding the volume of right prisms. It includes the homework assignment, which is to solve problems 1a, 3a, and 5 from problem set 23. The lesson discusses using the formula Volume = Base x Height, where the base is the area of the two-dimensional base of the prism. It provides examples of solving for the height of various right prisms given their volume and base dimensions.
Module 3 lesson 11
The document appears to be notes from a math lesson on angle problems and solving equations. It provides the date of the lesson, lists the homework and an upcoming exam. There are worked examples of homework problems and exit ticket solutions. It also addresses how to create equations from diagrams involving angles.
Module 5 lessons 19 and 20
The document outlines the homework, materials needed, and lesson plans for an April 23rd class. Students are assigned a Module 3 review packet due April 25th and a Module 1 review packet due April 28th. They are also instructed to bring pencils for the upcoming Friday class. Lessons 19 and 20 will cover pages S.126 and S.133 of the textbook.
Module 3 lesson 9
The document is notes from a math lesson on using if-then moves in solving equations. It includes the lesson objective, homework assignments due, and examples of solving equations using properties of equality like addition, subtraction, multiplication, division, and substitution. Key topics covered are converting between hours and minutes, using the distance-rate-time formula, and setting up and solving equations.
Module 1 lesson 10
This document contains notes from Lesson 10. It includes an example problem about Grandma's chocolate chip cookie recipe that uses 3 cups of flour to make 4 dozen cookies. Students are asked to complete a chart comparing the amounts of flour and cookies and determine if they are proportional. They also identify the unit rate and write an equation to represent the relationship. Another problem asks students to plot points on a graph about Grandma making cookies with 1 cup of sugar left and with no sugar. The closing questions review what points are always on a graph of proportional quantities and how to use the unit rate to represent proportional relationships in tables, equations, and graphs.
Assessment sample questions answer key
The document outlines an assessment sample packet for students with homework assigned to finish the packet if needed. It provides the date of April 28, 2014 and spans 16 pages with no other visible text or details provided about the sample questions, answers, or content of the assessment.
Module 1 lesson 14
The document outlines Module 1 Lesson 14 which covers percentage problems involving markups, discounts, commissions and fractional markdowns. It provides the general equations for calculating percentages of original amounts as well as new amounts after markups or discounts. Examples are shown and closing questions review key concepts about finding solutions to fractional markdown problems and comparing commissions to discounts.
Module 3 lesson 21
This document outlines a math lesson on calculating surface area. The lesson defines surface area and explains how to find the surface area of three-dimensional objects by using nets. It discusses right rectangular prisms and right triangular prisms, and provides an example of calculating the surface area of a right rectangular prism using the formula of surface area equals lateral area plus two times the area of the base.
Day 33 station review for exam 8
The document outlines station review notes for Exam 8, including looks like/sounds like criteria for bonus points, allowable communication during stations, and preparation tips for the exam. It provides guidance on station procedures, expectations, and homework to review in order to be ready for the next day's exam.
Module 3 lesson 1
The document outlines Module 3, Lesson 1 which has the aim of teaching students how to generate equivalent expressions. It includes the homework assigned which is problems 1-5, 11-14, 17-18 from the lesson 1 problem set. The lesson covers distributing a new module packet, working through examples of generating equivalent expressions using different groupings and orders of terms in addition and multiplication, and closing questions about the rules for rearranging terms.
Module 4 lesson 17 day 2
This document outlines the lesson plan for a mathematics class on mixture problems. The aim of the lesson is to teach students how to solve mixture problems. The homework assigned is problems 1, 4, and 6 from problem set 17 and problem 9 from problem set 16. The closing questions ask students about the structure of expressions for mixture problems and how mixture problems compare to population problems.
Day 2 random samples
The document discusses random sampling and populations. It begins with an example asking students to survey their favorite sports and describes how random sampling can provide a more accurate representation of an entire population compared to convenience sampling. Examples are given showing how random samples of luggage tags and elephant ages can help estimate characteristics of the larger population. The document then demonstrates how random sampling can be used to estimate the percentage of defective brake pads or products. It shows how results may vary between random samples of different sizes due to natural variability.
Module 5 lessons 10 and 11
The document outlines the homework assignments for Module 5 Lessons 10 and 11 of a mathematics class. It states that a Module 3 review is due on April 25th and a Module 1 review is due on April 28th. It also provides instructions to complete an exit ticket for Lesson 7 on using simulation to estimate probability.
Day 15 angle pairs intro
This document introduces different types of angle pairs:
- Complementary angles sum to 90 degrees.
- Supplementary angles sum to 180 degrees.
- Vertical angles are opposite angles formed when two lines intersect, and are always equal.
- Adjacent angles share a common vertex and side.
It provides examples of identifying different types of angle pairs and notes there will be a cumulative exam on angle pairs next week.
Module 2 lesson 21
The document outlines a lesson on if-then moves with integer cards. Students are split into groups and each given integer cards to manipulate according to different operations like addition, subtraction, multiplication and division. They track their scores as they perform the operations. The lesson aims to reinforce integer operations through interactive games and problems.
Module 2 review
This document is a review of Module 2 from April 29, 2014. It contains 11 pages of notes on the key topics and concepts covered in Module 2, including a summary of the material to help with exam preparation.
Linear equations lesson 8 day 2 graphing linear equations
The document is from a pre-algebra lesson on graphing linear equations. It discusses re-arranging equations into slope-intercept form (y=mx+b) and explains the procedure for graphing a line when given an equation in this format. Specifically, it describes using the slope (m) to rise/run and the y-intercept (b) to locate the point where the line crosses the y-axis. The document provides examples and questions to reinforce understanding of graphing linear equations from their slope-intercept form.
Linear equations lesson 8 day 1 graphing linear equations
The document is notes from a pre-algebra lesson on graphing linear equations using the y=mx+b format. It includes instructions to complete problems 9 and 10 on page 48, as well as examples of graphing different linear equations by plotting points from the equation and connecting them with a line. The closing question asks students to explain the procedure for graphing a line when given an equation in y=mx+b format.
Linear equations lesson 7 slope formula
This document appears to be notes from a pre-algebra lesson on calculating slope. It includes examples of slope calculations for lines on pages 42, 43, 47, and 48. The closing question asks students to explain the procedure for finding the slope of a line.
Module 4.5 lesson 10 scale area
This document contains notes from a math lesson on solving area problems using scale drawings. The lesson outlines the do now activity and upcoming homework assignments. It then discusses scale drawings and scale factors on pages 3 through 11, explaining how to use scale drawings to find the actual area of real-world objects.
Module 4.5 lesson 9 computing actual lengths
This document outlines a math lesson on computing actual lengths from a scale drawing. It includes notes on converting scaled measurements to actual lengths using scale factors. For homework, students are asked to complete problem set #4 which involves calculating actual distances based on scale drawings. A quiz on this content is scheduled for February 28.
Linear equations lesson 6 slope
This document contains notes from a pre-algebra lesson on slope. It includes examples of finding the slope of a line from its graph and equation. There is a quiz scheduled on linear equations for Wednesday February 15th for B day students and Thursday February 16th for A day students. The lesson discusses different types of slopes including positive, negative, zero, and undefined slopes.
Module 4.5 lesson 7 scale factor as a percent
This document contains notes from a math lesson on scale factor as a percent. It includes homework assignments and pages from the textbook covering topics such as calculating scale factor as a percentage and creating scale drawings with different horizontal and vertical scale factors. The closing question asks whether a scale drawing can have different horizontal and vertical scale factors and how to create one with different factors.
Module 4.5 lesson 6 scale map
This document discusses using scale maps to determine actual distances. It provides examples of using scale factors and proportions to calculate distances between towns based on their representation on a map. The scale of the map in the examples is 0.75 inches equals 4 miles. Students are asked to use this scale to determine actual distances between various town pairs. They are also asked why distances calculated from a map may be less than the actual distance driven in a car.
More Related Content
Viewers also liked
Module 5 lessons 19 and 20
The document outlines the homework, materials needed, and lesson plans for an April 23rd class. Students are assigned a Module 3 review packet due April 25th and a Module 1 review packet due April 28th. They are also instructed to bring pencils for the upcoming Friday class. Lessons 19 and 20 will cover pages S.126 and S.133 of the textbook.
Module 3 lesson 9
The document is notes from a math lesson on using if-then moves in solving equations. It includes the lesson objective, homework assignments due, and examples of solving equations using properties of equality like addition, subtraction, multiplication, division, and substitution. Key topics covered are converting between hours and minutes, using the distance-rate-time formula, and setting up and solving equations.
Module 1 lesson 10
This document contains notes from Lesson 10. It includes an example problem about Grandma's chocolate chip cookie recipe that uses 3 cups of flour to make 4 dozen cookies. Students are asked to complete a chart comparing the amounts of flour and cookies and determine if they are proportional. They also identify the unit rate and write an equation to represent the relationship. Another problem asks students to plot points on a graph about Grandma making cookies with 1 cup of sugar left and with no sugar. The closing questions review what points are always on a graph of proportional quantities and how to use the unit rate to represent proportional relationships in tables, equations, and graphs.
Assessment sample questions answer key
The document outlines an assessment sample packet for students with homework assigned to finish the packet if needed. It provides the date of April 28, 2014 and spans 16 pages with no other visible text or details provided about the sample questions, answers, or content of the assessment.
Module 1 lesson 14
The document outlines Module 1 Lesson 14 which covers percentage problems involving markups, discounts, commissions and fractional markdowns. It provides the general equations for calculating percentages of original amounts as well as new amounts after markups or discounts. Examples are shown and closing questions review key concepts about finding solutions to fractional markdown problems and comparing commissions to discounts.
Module 3 lesson 21
This document outlines a math lesson on calculating surface area. The lesson defines surface area and explains how to find the surface area of three-dimensional objects by using nets. It discusses right rectangular prisms and right triangular prisms, and provides an example of calculating the surface area of a right rectangular prism using the formula of surface area equals lateral area plus two times the area of the base.
Day 33 station review for exam 8
The document outlines station review notes for Exam 8, including looks like/sounds like criteria for bonus points, allowable communication during stations, and preparation tips for the exam. It provides guidance on station procedures, expectations, and homework to review in order to be ready for the next day's exam.
Module 3 lesson 1
The document outlines Module 3, Lesson 1 which has the aim of teaching students how to generate equivalent expressions. It includes the homework assigned which is problems 1-5, 11-14, 17-18 from the lesson 1 problem set. The lesson covers distributing a new module packet, working through examples of generating equivalent expressions using different groupings and orders of terms in addition and multiplication, and closing questions about the rules for rearranging terms.
Module 4 lesson 17 day 2
This document outlines the lesson plan for a mathematics class on mixture problems. The aim of the lesson is to teach students how to solve mixture problems. The homework assigned is problems 1, 4, and 6 from problem set 17 and problem 9 from problem set 16. The closing questions ask students about the structure of expressions for mixture problems and how mixture problems compare to population problems.
Day 2 random samples
The document discusses random sampling and populations. It begins with an example asking students to survey their favorite sports and describes how random sampling can provide a more accurate representation of an entire population compared to convenience sampling. Examples are given showing how random samples of luggage tags and elephant ages can help estimate characteristics of the larger population. The document then demonstrates how random sampling can be used to estimate the percentage of defective brake pads or products. It shows how results may vary between random samples of different sizes due to natural variability.
Module 5 lessons 10 and 11
The document outlines the homework assignments for Module 5 Lessons 10 and 11 of a mathematics class. It states that a Module 3 review is due on April 25th and a Module 1 review is due on April 28th. It also provides instructions to complete an exit ticket for Lesson 7 on using simulation to estimate probability.
Day 15 angle pairs intro
This document introduces different types of angle pairs:
- Complementary angles sum to 90 degrees.
- Supplementary angles sum to 180 degrees.
- Vertical angles are opposite angles formed when two lines intersect, and are always equal.
- Adjacent angles share a common vertex and side.
It provides examples of identifying different types of angle pairs and notes there will be a cumulative exam on angle pairs next week.
Module 2 lesson 21
The document outlines a lesson on if-then moves with integer cards. Students are split into groups and each given integer cards to manipulate according to different operations like addition, subtraction, multiplication and division. They track their scores as they perform the operations. The lesson aims to reinforce integer operations through interactive games and problems.
Module 2 review
This document is a review of Module 2 from April 29, 2014. It contains 11 pages of notes on the key topics and concepts covered in Module 2, including a summary of the material to help with exam preparation.
Viewers also liked (14)
More from Erik Tjersland
Linear equations lesson 8 day 2 graphing linear equations
The document is from a pre-algebra lesson on graphing linear equations. It discusses re-arranging equations into slope-intercept form (y=mx+b) and explains the procedure for graphing a line when given an equation in this format. Specifically, it describes using the slope (m) to rise/run and the y-intercept (b) to locate the point where the line crosses the y-axis. The document provides examples and questions to reinforce understanding of graphing linear equations from their slope-intercept form.
Linear equations lesson 8 day 1 graphing linear equations
The document is notes from a pre-algebra lesson on graphing linear equations using the y=mx+b format. It includes instructions to complete problems 9 and 10 on page 48, as well as examples of graphing different linear equations by plotting points from the equation and connecting them with a line. The closing question asks students to explain the procedure for graphing a line when given an equation in y=mx+b format.
Linear equations lesson 7 slope formula
This document appears to be notes from a pre-algebra lesson on calculating slope. It includes examples of slope calculations for lines on pages 42, 43, 47, and 48. The closing question asks students to explain the procedure for finding the slope of a line.
Module 4.5 lesson 10 scale area
This document contains notes from a math lesson on solving area problems using scale drawings. The lesson outlines the do now activity and upcoming homework assignments. It then discusses scale drawings and scale factors on pages 3 through 11, explaining how to use scale drawings to find the actual area of real-world objects.
Module 4.5 lesson 9 computing actual lengths
This document outlines a math lesson on computing actual lengths from a scale drawing. It includes notes on converting scaled measurements to actual lengths using scale factors. For homework, students are asked to complete problem set #4 which involves calculating actual distances based on scale drawings. A quiz on this content is scheduled for February 28.
Linear equations lesson 6 slope
This document contains notes from a pre-algebra lesson on slope. It includes examples of finding the slope of a line from its graph and equation. There is a quiz scheduled on linear equations for Wednesday February 15th for B day students and Thursday February 16th for A day students. The lesson discusses different types of slopes including positive, negative, zero, and undefined slopes.
Module 4.5 lesson 7 scale factor as a percent
This document contains notes from a math lesson on scale factor as a percent. It includes homework assignments and pages from the textbook covering topics such as calculating scale factor as a percentage and creating scale drawings with different horizontal and vertical scale factors. The closing question asks whether a scale drawing can have different horizontal and vertical scale factors and how to create one with different factors.
Module 4.5 lesson 6 scale map
This document discusses using scale maps to determine actual distances. It provides examples of using scale factors and proportions to calculate distances between towns based on their representation on a map. The scale of the map in the examples is 0.75 inches equals 4 miles. Students are asked to use this scale to determine actual distances between various town pairs. They are also asked why distances calculated from a map may be less than the actual distance driven in a car.
Linear equations lesson 5 horizontal and vertical lines
This document contains notes from a lesson on linear equations that focuses on horizontal and vertical lines. It includes examples of solving linear equations by choosing to fix either the x-value or y-value. Students are given a quiz on Thursday and Friday to assess their understanding of these concepts. The document provides instructions to complete example 5 on page 22 of the lesson materials.
Module 4.5 lesson 4 scale area problems
The document is from a math lesson on computing actual areas from scale drawings. It provides examples of finding scale factors from drawings and using them to determine actual areas. It asks students to check if their area calculations match the examples. The lesson closes by asking students how to find an actual area given a scale drawing and a situation where this would be useful.
Module 4.5 lesson 3 computing actual lengths from scale drawings
This document provides examples and explanations for computing actual lengths from scale drawings. It begins with an example of a proposed half basketball court that needs to fit within a 25 foot by 75 foot lot. It then explains that the scale factor is the constant of proportionality that relates the actual length to the drawn length. Several other examples are worked through, applying the concept of using the scale factor and a proportion to determine actual lengths from a scaled drawing. The document concludes by restating that the scale factor expresses the relationship between the actual object and its scale drawing.
Module 4.5 lesson 2 unit rate as the scale factor
This document contains notes from a math lesson on unit rate as a scale factor. It includes examples of using scale factors to determine measurements for scaled drawings. The key points are that scale factor is calculated as the ratio of actual to drawn measurements, scale factors greater than 1 enlarge a drawing while factors less than 1 reduce it, and scale factors can be used to find dimensions for scaled objects and maps using proportions. Homework includes problem set questions and creating a scaled drawing.
Linear equations lesson 4 graphing linear equations
This document outlines a lesson on graphing linear equations from tables of values. It provides instructions to complete example 2 on page 15, and schedules supplemental practice and a quiz for the following Thursday and Friday to reinforce the concepts taught in the lesson.
Module 4.5 lesson 1 scale drawings
1) The document provides lesson materials on scale drawings, including examples of scale drawings that are reductions or enlargements of original images. It discusses using scale drawings of maps and geometric shapes.
2) Students are asked to identify corresponding points on scale drawings of maps and the coordinates of vertices for geometric shapes. They are also asked to determine if a constant of proportionality exists for scale drawings.
3) The lesson aims to help students understand how to relate scale drawings to ratios and rates by analyzing examples of scale drawings and their relationships to original images.
Review for module 4 exam
The document outlines a review for a Module 4 exam. It instructs students to prepare for the exam by doing homework and going over the previous night's work with a partner. The review includes mixed exercises on percentages to help students study for concepts involving percents that could appear on the exam.
Linear equations lesson 3 consecutive integers
The document outlines a pre-algebra lesson on consecutive integers that includes:
- Writing let statements and equations to solve word problems involving consecutive integers
- Examples of consecutive integer word problems and their solutions
- A closing activity to explain the procedure for writing equations from word problems.
14 mixed review with percents with answers
The document outlines a math class focusing on percentages that includes a do now, homework assignments, and an exam date. It provides notes for a mixed review of percentage problems, repeating the class objective of percentage calculations.
Module 4 lesson 13
This document outlines notes from a science lesson on relative error. It includes instructions for students to complete homework problems and an experiment to measure density. The document provides examples to calculate relative error and asks students to consider how this concept could be applied to other labs.
Module 4 lesson 12 relative error
This document contains notes from a math lesson on relative error. It includes the date of the lesson, topics to be covered which are finding the percent error of measurements and the purpose of finding percent error. The document provides examples of measurements and the corresponding percent errors. It also lists homework problems and the date of an upcoming exam.
Linear equations lesson 2 geometric word problems
This document outlines a lesson on solving geometric word problems algebraically. It provides instructions for students to complete problems 25-30 on page 4, which involve writing a "let statement" and equation for each word problem and solving to find the answer. The document includes pages of example problems and explains the procedure for writing an equation from a word problem. It concludes with a closing activity for students to explain their process.
More from Erik Tjersland (20)
Linear equations lesson 8 day 2 graphing linear equations
Linear equations lesson 8 day 2 graphing linear equations
Linear equations lesson 8 day 1 graphing linear equations
Linear equations lesson 8 day 1 graphing linear equations
Linear equations lesson 5 horizontal and vertical lines
Linear equations lesson 5 horizontal and vertical lines
Module 4.5 lesson 3 computing actual lengths from scale drawings
Module 4.5 lesson 3 computing actual lengths from scale drawings
Linear equations lesson 4 graphing linear equations
Linear equations lesson 4 graphing linear equations
Recently uploaded
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Recently uploaded (20)
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Module 2 lesson 23
- 1. Module 2 Lesson 23.notebook December 18, 2013 Module 2, Lesson 23 AIM: Solving Equations Using Algebra HW: • Lesson 23 Problem Set #1, 3, 4, 6, 7 Do Now: Exit Ticket For Lesson 22 1
- 2. Module 2 Lesson 23.notebook December 18, 2013 Susan and Bonnie are shopping for school clothes. Susan has $50 and a coupon for a $10 discount at a clothing store where each shirt costs $12. Susan thinks that she can buy 3 shirts, but Bonnie says that Susan can buy 5 shirts. The equations they used to model the problem are listed below. Solve each equation algebraically, justify your steps, and determine who is correct and why. 2
- 16. Module 2 Lesson 23.notebook December 18, 2013 Closing: How do we translate a word problem into an equation? For instance, in Exercise 1 about the youth group trip, what key words and statements helped you determine the operations and values used in the equation? 2.) How do we make sense of a word problem and model it with an equation? 16