Laboratorium Oven MMM type Ecocell (Germany)
Tersedia dengan ukuran volume 55, 111, dan 222 liter.
Bekerja pada suhu 5 - 250 C
Interiol : stainless steel, mat. No. 1.4301 (AISI 304)
www.edonilab.com
This document provides specifications for ultra-low temperature freezers that can reach temperatures as low as -86°C. It describes the structure, insulation, inner chamber, door features, refrigeration system, controls, alarms, certifications and optional accessories. Upright models range in capacity from 230 to 650 liters with operating temperatures from -40°C to -86°C even at an ambient temperature of +32°C.
The document describes plans for a new medical facility in Tripoli, Libya. It will include:
1. A PET department
2. Cyclotron laboratory
3. Technical rooms
The building will be approximately 68.7m x 20m with an interior height of 4.55m. It will have foundations, pillars, and slab covering made of reinforced concrete. Interior finishes will include plaster, stoneware tiles, and raised floors. The facility will also include mechanical, electrical, and security systems. The goal is to realize a new medical facility that meets the highest international standards.
This document provides installation instructions for the Contura 35L wood-burning stove. It includes specifications for the stove as well as requirements for installation clearances, combustion air supply, chimney connection, hearth protection, and authorization of the installation. Safety warnings are also provided to prevent fire hazards and personal injury when operating the stove.
This document provides a product handbook for DORMApedia. It contains information on various door hardware solutions including entry/exit solutions, space management solutions, and structure/point fittings. The document includes product images, codes, specifications and quantities for sample bill of materials. It also contains disclaimers about liability and accessing the latest version online. The content is organized into sections for different types of solutions.
This document provides information on CO2 incubators from two series - C series and CB series.
The C series offers temperature control from 7°C above ambient to 50°C, humidity up to 95% RH without condensation, and DS controller display. It is intended for routine cell culture applications.
The CB series offers wider temperature range up to 60°C, humidity up to 98% RH without condensation using a double-walled system, and MCS controller with advanced monitoring. It is intended for sensitive applications like primary cell culture.
Both series aim to maintain optimal culture conditions without condensation at high humidity levels through precise humidity and temperature control systems.
This document provides specifications for a 1200°C muffle furnace. It has a working temperature of 1120°C and maximum temperature of 1200°C. Temperature is controlled via a PID controller with accuracy of +/-1°C and it can be programmed with 30 segments up to 1100°C. The furnace has a 4"x4"x4" chamber made of high purity fibrous alumina with gas inlet and outlet ports. It is ideal for applications like heat treating and ignition testing that require temperatures up to 1100°C.
G4
CARACTERISTICI TEHNICE
Fabricare:
- Rezervor interior si carcasa exterioara din AISI 304 din oțel inoxidabil .
- Suprafață primara Trapcold (marcă inregistrata) evaporator cu randament maxim .
- Izolare foarte subtire , prin intermediul spumei poliuretanice nepoluanta.
- Interior ce permite golirea totala a tancului.
- Conector ieșire DN50 cu filet cu dop .
- AISI 304 braț din oțel inoxidabil .
- Masure nivel lapte
.
SISTEM DE RĂCIRE :
- Non - glazură de răcire , chiar cu nivel scăzut de umplere .
- Expansiune directa .
- R404A lichid de racire.
- Capac din inox .
- Modelele din această gamă sunt compacte și
permite o instalare usoara .
- Este în conformitate cu EN 13732 clasa BII .
SISTEM ELECTRIC :
- Controler comuterizat FIPO3, sistem de gestionare a tuturor operațiunilor
- Verificarea temperaturii laptelui
- Afișaj digital al temperaturii
- Program de agitare
- Protecție releu de temperatură pentru cele trei faza ale compresoarului.
- Cabluri de alimentare electrice cu standardizate
priza ( de sex masculin ) .
- 230V 50HZ alimentare monofazată sau 400V 50HZ trei faze + neutru .
LA CERERE :
- Ventil fluture .
- Cot din otel inoxidabil .
This document provides specifications for ultra-low temperature freezers that can reach temperatures as low as -86°C. It describes the structure, insulation, inner chamber, door features, refrigeration system, controls, alarms, certifications and optional accessories. Upright models range in capacity from 230 to 650 liters with operating temperatures from -40°C to -86°C even at an ambient temperature of +32°C.
The document describes plans for a new medical facility in Tripoli, Libya. It will include:
1. A PET department
2. Cyclotron laboratory
3. Technical rooms
The building will be approximately 68.7m x 20m with an interior height of 4.55m. It will have foundations, pillars, and slab covering made of reinforced concrete. Interior finishes will include plaster, stoneware tiles, and raised floors. The facility will also include mechanical, electrical, and security systems. The goal is to realize a new medical facility that meets the highest international standards.
This document provides installation instructions for the Contura 35L wood-burning stove. It includes specifications for the stove as well as requirements for installation clearances, combustion air supply, chimney connection, hearth protection, and authorization of the installation. Safety warnings are also provided to prevent fire hazards and personal injury when operating the stove.
This document provides a product handbook for DORMApedia. It contains information on various door hardware solutions including entry/exit solutions, space management solutions, and structure/point fittings. The document includes product images, codes, specifications and quantities for sample bill of materials. It also contains disclaimers about liability and accessing the latest version online. The content is organized into sections for different types of solutions.
This document provides information on CO2 incubators from two series - C series and CB series.
The C series offers temperature control from 7°C above ambient to 50°C, humidity up to 95% RH without condensation, and DS controller display. It is intended for routine cell culture applications.
The CB series offers wider temperature range up to 60°C, humidity up to 98% RH without condensation using a double-walled system, and MCS controller with advanced monitoring. It is intended for sensitive applications like primary cell culture.
Both series aim to maintain optimal culture conditions without condensation at high humidity levels through precise humidity and temperature control systems.
This document provides specifications for a 1200°C muffle furnace. It has a working temperature of 1120°C and maximum temperature of 1200°C. Temperature is controlled via a PID controller with accuracy of +/-1°C and it can be programmed with 30 segments up to 1100°C. The furnace has a 4"x4"x4" chamber made of high purity fibrous alumina with gas inlet and outlet ports. It is ideal for applications like heat treating and ignition testing that require temperatures up to 1100°C.
G4
CARACTERISTICI TEHNICE
Fabricare:
- Rezervor interior si carcasa exterioara din AISI 304 din oțel inoxidabil .
- Suprafață primara Trapcold (marcă inregistrata) evaporator cu randament maxim .
- Izolare foarte subtire , prin intermediul spumei poliuretanice nepoluanta.
- Interior ce permite golirea totala a tancului.
- Conector ieșire DN50 cu filet cu dop .
- AISI 304 braț din oțel inoxidabil .
- Masure nivel lapte
.
SISTEM DE RĂCIRE :
- Non - glazură de răcire , chiar cu nivel scăzut de umplere .
- Expansiune directa .
- R404A lichid de racire.
- Capac din inox .
- Modelele din această gamă sunt compacte și
permite o instalare usoara .
- Este în conformitate cu EN 13732 clasa BII .
SISTEM ELECTRIC :
- Controler comuterizat FIPO3, sistem de gestionare a tuturor operațiunilor
- Verificarea temperaturii laptelui
- Afișaj digital al temperaturii
- Program de agitare
- Protecție releu de temperatură pentru cele trei faza ale compresoarului.
- Cabluri de alimentare electrice cu standardizate
priza ( de sex masculin ) .
- 230V 50HZ alimentare monofazată sau 400V 50HZ trei faze + neutru .
LA CERERE :
- Ventil fluture .
- Cot din otel inoxidabil .
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
Suitable for most twin screw materials testing machines, the
Tinius Olsen Environmental Chamber provides a means for
performing physical tests within a temperature range of -70-300°C (-95-570°F).
An internal radial fan provides efficient air circulation that
minimizes temperature gradients throughout the chamber.
A digital controller ensures accurate temperature control.
Optional sub-zero temperature testing is available via a selfpressurising liquid nitrogen Dewar.
The chamber door is fitted with a triple glazed window for viewing the test area and also scanning the sample for strain measurements when using the Tinius Olsen 500L laser extensometer. When liquid nitrogen is used, a demisting facility
is fitted.
The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
ROSE Systemtechnik GmbH is a leading provider of industrial enclosure systems based in Porta Westfalica, Germany. It develops and manufactures high-quality enclosures out of materials like aluminum, stainless steel, and plastics for applications in mechanical engineering, automation, explosive environments, food/beverage industry. The company offers a wide range of standard and customized enclosure solutions.
Controlling smoke movement is crucial for saving lives in multistory buildings. Smoke can fill building interiors within minutes and causes thousands of deaths and injuries and billions in property damage annually. Building codes require smoke protection features for elevator shafts, atriums, stairwells and other areas to slow the spread of smoke. However, traditional smoke control solutions have downsides. The Smoke Guard system provides nearly invisible and more effective smoke control to protect lives and property without taking up space.
C&C manufactures custom modular aluminum enclosures that are engineered to meet specific needs. Their enclosures use a T-slotted aluminum profile system, allowing for flexible configurations. A variety of enclosure types are offered, including noise enclosures, clean rooms, safety guards, and temperature controlled spaces. C&C designs, engineers, and assembles enclosures on-site according to customer specifications.
This document provides installation instructions for the Contura 35TL wood-burning stove. It includes details on minimum installation distances, supplying combustion air, connecting the stove to a chimney, installing surround panels, and final inspection. The instructions specify installing the stove at least 1 meter from combustible materials and following all local building codes. Proper installation is important for safety and performance.
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlW
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/SPzT1r
FLR Radiators Exheat Flameproof Fan Heaters - Hazardous Area Industrial Air W...Thorne & Derrick UK
This document provides information on the FLR range of flameproof area radiators designed for hazardous areas where airborne dust is a concern. The radiators can be used in ammunition depots, explosive stores, chemical plant warehouses, and other similar applications. They have robust construction, are certified to IP66 weatherproof standards, and have a preset surface temperature control thermostat and over-temperature cut-out to ensure safety. The radiators come in 1kW, 2kW and 3kW models of varying dimensions and weights.
The TT-708T Electric Loft Drier Laboratory Drying Oven is a piece of laboratory equipment used to dry, bake, and preheat various materials through hot air circulation to uniformly distribute temperatures. It has an interior size ranging from 300x300x400mm to 400x400x450mm, a temperature range of room temperature to 200°C or 300°C, and is made of carbon steel and steel plate with an anti-corrosion coating. The drying oven controls temperature through a microcomputer system for precise regulation between room temperature and 200°C/300°C.
This document provides product specifications for various industrial kitchen refrigeration and display equipment made by Haris Industrial Kitchen and Catering Equipment, including:
- Semi-vertical open display refrigerators with adjustable shelves, lighting, and remote condensing units.
- Open front refrigerated display cabinets with illuminated sides and integrated or remote condensing units.
- Open display freezers with adjustable shelves, lighting, and built-in condensing units.
- Combined display freezers with independent cooling for upper and lower sections and remote condensing units.
The document describes features like insulated bodies, fan-assisted cooling, electronic temperature controls, and options for accessories. Dimensions, temperature ranges, and electrical specifications
This document describes Durocell laboratory drying ovens. The ovens come in 22, 55, 111, and 222 liter volumes and can heat from 5 degrees Celsius above ambient temperature up to 125 degrees Celsius. They are made of stainless steel and ideal for drying acids, bases, and other non-flammable materials. The ovens come in standard and comfort line models with various programming and control options.
This document provides specifications for ultra-low temperature freezers that can reach temperatures as low as -86°C. It describes the structure, insulation, inner chamber, door features, refrigeration system, controls, alarms, certifications and optional accessories. Upright models range in capacity from 230 to 650 liters with single doors and adjustable interior shelving.
1) The document discusses outdoor and indoor waterproof cabinets from BKT Elektronik for telecommunications equipment. This includes IP55 rated outdoor distribution cabinets in two models (DASZ-AL and DASZ-P) as well as IP55 rated indoor industrial cabinets.
2) The outdoor cabinets are made of aluminum and coated for outdoor use. They include heating and cooling systems to regulate temperature. The indoor cabinets also have an IP55 rating and include features like doors, assembly sections, and cable glands.
3) BKT provides complete climate control solutions including heaters, fans, and air conditioners for use in their outdoor and indoor cabinets. The systems are designed to keep equipment at safe
EasyClean400 is versatile in its application. It offers multiple control possibilities and can be programmed extensively. Furthermore, a version for applications in explosion hazardous areas is available. The integration into a distributed control system (DCS) can be easily realized in a conventional way or via a Profibus® PA.
The document describes Rittal's TopTherm chiller system, which offers a standardized modular design for efficient cooling. The modular components include control modules, chiller modules, and water modules that can be combined and exchanged easily. This allows for fast delivery and installation of customized cooling systems ranging from 8-40kW.
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
This document provides information on various accessories for climate control systems, including base/plinth components, side panels, hinges, earth straps, air routing accessories, temperature displays, thermostats, hygrostats, speed controls, and mounting kits. Details are given on the materials, specifications, and applications of each accessory item.
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
Suitable for most twin screw materials testing machines, the
Tinius Olsen Environmental Chamber provides a means for
performing physical tests within a temperature range of -70-300°C (-95-570°F).
An internal radial fan provides efficient air circulation that
minimizes temperature gradients throughout the chamber.
A digital controller ensures accurate temperature control.
Optional sub-zero temperature testing is available via a selfpressurising liquid nitrogen Dewar.
The chamber door is fitted with a triple glazed window for viewing the test area and also scanning the sample for strain measurements when using the Tinius Olsen 500L laser extensometer. When liquid nitrogen is used, a demisting facility
is fitted.
The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
ROSE Systemtechnik GmbH is a leading provider of industrial enclosure systems based in Porta Westfalica, Germany. It develops and manufactures high-quality enclosures out of materials like aluminum, stainless steel, and plastics for applications in mechanical engineering, automation, explosive environments, food/beverage industry. The company offers a wide range of standard and customized enclosure solutions.
Controlling smoke movement is crucial for saving lives in multistory buildings. Smoke can fill building interiors within minutes and causes thousands of deaths and injuries and billions in property damage annually. Building codes require smoke protection features for elevator shafts, atriums, stairwells and other areas to slow the spread of smoke. However, traditional smoke control solutions have downsides. The Smoke Guard system provides nearly invisible and more effective smoke control to protect lives and property without taking up space.
C&C manufactures custom modular aluminum enclosures that are engineered to meet specific needs. Their enclosures use a T-slotted aluminum profile system, allowing for flexible configurations. A variety of enclosure types are offered, including noise enclosures, clean rooms, safety guards, and temperature controlled spaces. C&C designs, engineers, and assembles enclosures on-site according to customer specifications.
This document provides installation instructions for the Contura 35TL wood-burning stove. It includes details on minimum installation distances, supplying combustion air, connecting the stove to a chimney, installing surround panels, and final inspection. The instructions specify installing the stove at least 1 meter from combustible materials and following all local building codes. Proper installation is important for safety and performance.
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlW
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/SPzT1r
FLR Radiators Exheat Flameproof Fan Heaters - Hazardous Area Industrial Air W...Thorne & Derrick UK
This document provides information on the FLR range of flameproof area radiators designed for hazardous areas where airborne dust is a concern. The radiators can be used in ammunition depots, explosive stores, chemical plant warehouses, and other similar applications. They have robust construction, are certified to IP66 weatherproof standards, and have a preset surface temperature control thermostat and over-temperature cut-out to ensure safety. The radiators come in 1kW, 2kW and 3kW models of varying dimensions and weights.
The TT-708T Electric Loft Drier Laboratory Drying Oven is a piece of laboratory equipment used to dry, bake, and preheat various materials through hot air circulation to uniformly distribute temperatures. It has an interior size ranging from 300x300x400mm to 400x400x450mm, a temperature range of room temperature to 200°C or 300°C, and is made of carbon steel and steel plate with an anti-corrosion coating. The drying oven controls temperature through a microcomputer system for precise regulation between room temperature and 200°C/300°C.
This document provides product specifications for various industrial kitchen refrigeration and display equipment made by Haris Industrial Kitchen and Catering Equipment, including:
- Semi-vertical open display refrigerators with adjustable shelves, lighting, and remote condensing units.
- Open front refrigerated display cabinets with illuminated sides and integrated or remote condensing units.
- Open display freezers with adjustable shelves, lighting, and built-in condensing units.
- Combined display freezers with independent cooling for upper and lower sections and remote condensing units.
The document describes features like insulated bodies, fan-assisted cooling, electronic temperature controls, and options for accessories. Dimensions, temperature ranges, and electrical specifications
This document describes Durocell laboratory drying ovens. The ovens come in 22, 55, 111, and 222 liter volumes and can heat from 5 degrees Celsius above ambient temperature up to 125 degrees Celsius. They are made of stainless steel and ideal for drying acids, bases, and other non-flammable materials. The ovens come in standard and comfort line models with various programming and control options.
This document provides specifications for ultra-low temperature freezers that can reach temperatures as low as -86°C. It describes the structure, insulation, inner chamber, door features, refrigeration system, controls, alarms, certifications and optional accessories. Upright models range in capacity from 230 to 650 liters with single doors and adjustable interior shelving.
1) The document discusses outdoor and indoor waterproof cabinets from BKT Elektronik for telecommunications equipment. This includes IP55 rated outdoor distribution cabinets in two models (DASZ-AL and DASZ-P) as well as IP55 rated indoor industrial cabinets.
2) The outdoor cabinets are made of aluminum and coated for outdoor use. They include heating and cooling systems to regulate temperature. The indoor cabinets also have an IP55 rating and include features like doors, assembly sections, and cable glands.
3) BKT provides complete climate control solutions including heaters, fans, and air conditioners for use in their outdoor and indoor cabinets. The systems are designed to keep equipment at safe
EasyClean400 is versatile in its application. It offers multiple control possibilities and can be programmed extensively. Furthermore, a version for applications in explosion hazardous areas is available. The integration into a distributed control system (DCS) can be easily realized in a conventional way or via a Profibus® PA.
The document describes Rittal's TopTherm chiller system, which offers a standardized modular design for efficient cooling. The modular components include control modules, chiller modules, and water modules that can be combined and exchanged easily. This allows for fast delivery and installation of customized cooling systems ranging from 8-40kW.
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
This document provides information on various accessories for climate control systems, including base/plinth components, side panels, hinges, earth straps, air routing accessories, temperature displays, thermostats, hygrostats, speed controls, and mounting kits. Details are given on the materials, specifications, and applications of each accessory item.
The document describes ES Series Cooled Incubators that can maintain temperatures between -10°C and +60°C for use in biology, zoology, botany, and quality control laboratories. The incubators have stainless steel interiors and exteriors with high-density polyurethane insulation. They include features like triple-glass doors, interior lighting, temperature alarms, timers, and microprocessor controls. Specifications are provided for two models: the ES 120 with a 120-liter chamber and the ES 252 with a 252-liter chamber.
This document provides information on CO2 incubators from two series - C series and CB series.
The C series offers temperature control from 7°C above ambient to 50°C, humidity up to 95% RH without condensation, and DS controller display. It is intended for routine cell culture applications.
The CB series offers wider temperature range up to 60°C, humidity up to 98% RH without condensation using a double-walled system, MCS controller with advanced display, and safety features making it suitable for sensitive primary cell culture and tissue engineering applications.
It describes features, specifications and applications of the different models within each series.
Detectomat Fire Alarm Systems in India by Monshermonsher123
Monsher brings you the technologically advanced Detectomat Fire Alarm Systems in India by collaborating with the German giant Jobs Group, that has earned VDS approval and controls 98% of the world’s sprinkler production. For more information, visit us at: http://monsher.com/product.html
The document describes an industrial flow meter that offers:
1) Various process connections and construction lengths to meet customer needs.
2) Accuracy up to 0.5% with repeatability up to 0.2% across a wide dynamic range.
3) Intuitive operation and monitoring via a swivel display with outputs connecting to control systems.
Biochemical Incubator NBCI-100 is a microprocessor-controlled unit with automatic control for hot and cold conditions and offers 300 L capacity.
It is made up of stainless steel chamber and contains a removable shelf for easy cleaning.
Esco Evidence Drying Cabinet is a negative pressure cabinet designed to provide security, tamper proof, and prevent loss of integrity and credibility and possible cross-contamination of evidence and impede any harmful airborne pathogens, putrid odors, and other gases from escape that may harm or infect employees/technicians.
Electric chamber furnace for all applications. Main door includes 3 small doors with access to the removable modular shelves. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Air intake and exhaust controlled by temperature controller. Shielded electrical resistors on 4 surfaces. The heating is turned off at the opening of the door.
The document describes dry heat sterilizers and ovens from Nüve Sanayi Malzemeleri. It provides details on models of sterilizers and ovens including the FN series and KD series. The FN series offers sterilization, drying and heating capabilities while the higher capacity KD series is ideal for drying and heating. Both series feature precise temperature control and monitoring systems. Safety features help ensure proper functioning.
Our team of engineers can craft a precision development chamber that will meet or exceed your research; Depending on your needs, we can provide you with small plant growth chambers or large walk-in plant growth chambers. These units realize a reliable interplay of heat or cold, humidity and light; Includes a variety of temperature and light patterns essential for plant growth research.
Fas yiyecek içecek otomatı Modeli otomat pazarı sitesinde kahvecilerim güvencesinde satılmaktadır.Bu ürün İtalyan malı olup şık ve sağlamdır.Bu makinelerin ön yüzündeki tasarım ödül almıştır.
Kahveciniz yiyecek ve içecek otomatlarında bu makinenin artılarını siz sayın müşterilerimize sunmaktan onur duymaktadır.
Bu yiyecek otomatının kurulumu için bizi arayabilirsiniz.İzmir de bu makinelerin kurulumu ve bakımını yapmaktadır.
Vending operatör kısmında kahveciniz ile birlikte partner olan kafematik birlikte çalışmaktadır.
Kullanma ve kurulum kılavuzu fas ın modellerini kapsar.
www.kahveciniz.com
www.kahvecilerim.com
www.kahveciniz.com.tr
www.vendingborsasi.com
www.kafematik.com
www.bufematikvending.com
www.kahveler.com
www.kahvemakineleri.com
Drying oven LDO-A10 comes with polished stainless steel chamber design. With double layered glass door, large observation window helps in inspection of the sample kept inside oven during process.
Borel Swiss manufactures furnaces and ovens for thermal processing applications since 1927. With a team of 40 people, Borel manufactures products like standard furnaces, ovens, kilns and other equipment in Europe. Borel furnaces are used worldwide for processes such as drying, heating, heat treatment and more. Borel equipment is manufactured according to European quality and safety standards.
ALIT TECHNOLOGIES has developed FASTRIP T2-120 MIX based on its
many years of experience in the paint stripping industry.
In this machine the mechanical action of the paint stripper on the parts’ is ensured by the
hydrostatic thrust generated by the mixer. This makes the former a quieter
machine that can also operate with a more polluted paint stripper; the
absence of ultrasound also allows for the use of electronic components
that are less sensitive to the heat developed during normal machine
operation.
Overall, these choices have resulted in the design of an
extremely robust, reliable, safe, and well-functioning system.
Meta Revolutionizes Product Promotion with Automated Video Catalog Ads.pptxprovidenceadworks416
As a digital marketer, I am thrilled to see Meta revolutionizing product promotion with its new automated video catalog ads. This innovative feature allows anyone to seamlessly integrate dynamic video content into my catalog product ads, enhancing the visual appeal and engagement of campaigns. By leveraging Meta's advanced AI and machine learning capabilities, one can automatically deliver tailored video ads to the most interested users, boosting traffic and conversions. This new approach not only simplifies the ad creation process but also significantly improves performance and ROI.
This document was submitted as part of interview process for Marketing Specialist position at DTA Promotion, an Indonesian company which offers 360 degree marketing services, including ATL and BTL advertising platform.
Advertising and Promotion of whisper by Sakthi Sundarsakthisundar2001
This presentation is an invaluable resource for marketing professionals, students, and anyone interested in understanding the dynamics of effective advertising and promotion in the feminine hygiene sector. Explore how Whisper maintains its brand leadership and continues to innovate in a competitive market.
Evaluating the Effectiveness of Women-Focused MarketingHighViz PR
Women centric marketing is a vital part in reaching one of the most influential groups of consumers. Here is a guide to know and measure the impact of women-centric marketing efforts-
THE STORY COMMUNICATION Credential 2024.pptxhuyenngo62
The Story Communication là công ty quảng cáo truyền thông tích hợp (IMC) được xây dựng trên thế mạnh về Digital & Performance.
#Assemble #Integrity #Transformation #Initiative
Digital Marketing Company in India - DIGI BrooksDIGI Brooks
This infographic provides guidance on marketing analytics, helping businesses grow using tools like Google Analytics and AI, measuring ROI, and analysing future trends to track business development.
https://digibrooks.com/digital-marketing-services/
If you’re at all interested in digital
marketing and in making a name for
your brand online, then it is crucial that
you understand how to properly make
use of content marketing. Content
marketing is currently one of the
biggest trends in digital marketing as a
whole and is an area that many website owners and brands are investing in
heavily right now thanks to the impressive returns that they are seeing.
How to Start Affiliate Marketing with ChatGPT- A Step-by-Step Guide (1).pdfSimpleMoneyMaker
Discover the power of affiliate marketing with ChatGPT! This comprehensive guide takes you through the process of starting and scaling your affiliate marketing business using the latest AI technology. Learn how to leverage ChatGPT to generate content ideas, create engaging articles, and connect with your audience through personalized interactions. From building your strategy and optimizing conversions to analyzing performance and staying updated with industry trends, this eBook provides everything you need to know to succeed in affiliate marketing. Whether you're a beginner looking to start your online business or an experienced marketer wanting to take your efforts to the next level, this guide is your roadmap to success in the world of affiliate marketing.
AI Best Practices for Marketing HUG June 2024Amanda Farrell
During this presentation, the Nextiny marketing team reviews best practices when adopting generative AI into content creation. Join our HUG community to register for more events https://events.hubspot.com/sarasota/
Embark on style journeys Indian clothing store denver guide.pptxOmnama Fashions
Finding the perfect "Indian Clothing Store Denver" is essential for those seeking vibrant, authentic, and culturally rich attire in the heart of Colorado. Denver, a city known for its diverse culture and eclectic fashion scene, offers a variety of options for those in search of traditional and contemporary Indian clothing. Whether you're preparing for a wedding, festival, or cultural event, or simply wish to incorporate the elegance and beauty of Indian fashion into your wardrobe, discovering the right store can make all the difference.
1. ECOCELL_A
F.R.Z.
CMYK
F.R.Z.
CMYK
ECOCELL
wi t h n a t u ra l a i r c o n v e c t i o n
The highly cost-effective heating oven series
for simple drying processes. The ECOCELL-line
produces no noise and provides a very soft air
convection within the chamber.
Volume:
22, 55, 111, 222, 404, 707 litres
Working temperature:
5 °C above ambient temperature up to 250 °C/300 °C
Interior:
stainless steel, mat. No. 1.4301 (AISI 304)
Laboratory drying ovens
The versatile standard line with microprocessor control unit
Options
• 3 adjustable programs
• RS 232 – interface for printer or
PC-communication
• delayed heating start and stop function
• acoustic and visual alarm in erorr state
• time range 99 hours 59 minutes
• digital safety thermostat
• manual control of the air exhaust flap
– door window and interior lighting (excluded
volume 22 litres)
– access ports ∅ 25, 50, 100 mm (∅ 100 mm
is not available for 22-litres volume)
– door lock
– left door versions (excluded volume
22 and 707 litres)
– separate PT 100-sensor
– special software WarmComm
– stainless steel casing of the device
…standard line
The high-tech comfort line with multi-functional microprocessor control unit
Options
• 6 programs
• chip card system for individual program storage
• RS 232 – interface for printer or
PC-communication
• delayed heating start and stop function
• acoustic and visual alarm in error state
• time range 0–40 years with 1 min-intervals
• digital safety thermostat
• real time
• programming temperature ramps
• heating sequences
• programme cycles
• manual control of the air exhaust flap
• keyboard blocking
• door opening control
– door window and interior lighting (excluded
volume 22 litres)
– access ports ∅ 25, 50, 100 mm (∅ 100 mm
is not available for 22-litres volume)
– door lock
– left door versions (excluded volume 22
and 707 litres)
– separate PT 100-sensor
– special software WarmComm
– stainless steel casing of the device
…comfort line
F.R.Z.
F.R.Z.
CMYK
CMYK
2. ECOCELL_A
F.R.Z.
CMYK
F.R.Z.
CMYK
ECOCELL
Technical data
Models
22
55
111
222
404
707
Interior of stainless steel
volume
cca ltrs
22
55
111
222
404
707
material No. 1.4301
width
cca mm
240
400
540
540
540
940
depth
cca mm
320
390
390
540
540
540
height
cca mm
295
350
530
760
1410
1410
racks
max. No.
4
4
7
10
19
19
standard equipment
pcs. included
2
2
2
2
2
2
distance between guide rails
mm
60
70
70
70
70
70
storage area (w x d)
mm
185x265
380x335
520x335
520x485
520x485
920x485
Trays
Maximal weight of the load*)
per tray
max. kg
10
20
20
30
30
50
inside the oven
max. kg
25
50
50
70
100
130
Door
No.
External dimensions
width
(including door and handle)
cca mm
1
1
1
1
1
2
406
620
760
760
760
1160
depth
cca mm
580
640
640
790
790
790
height (incl. Foot
cca mm
604F
680F
860F
1090F
1910R
1910R
cca mm
52/49
52/49
52/49
52/49
52/49
52/49
cca mm
465
700
830
830
830
1230
and Rolls)
diameter of the
air branch
outer/inner
Package dimensions
width
(three layers carton)
depth
Weight
cca mm
665
730
730
730
860
860
height (incl. palette)
cca mm
655
880
1050
1280
2070
2080
netto
cca kg
31
55
75
100
150
215
brutto
cca kg
36
66
87
116
175
240
from 5 °C
250
250
250
250
250
250
2,7
2
2
2
2,5
3,5
cca ± °C
1,0
0,3
≤0,8
≤0,8
≤1
≤1
cca min.
34
59
60
99
85
95
Heat emission at 250 °C
cca W
300
590
760
990
1940
2550
Air exchange speed at 150 °C
cca/hour
6
8
12
5
4
3
4,5
Working temperature
(beginning of the regulation)
above ambient
temp. to °C
Temperature accuracy
space deviation
according to DIN 12 880 T2,
cca ± %
of the reached
at working temperature
temperature
with closed air flap and door
time variation
Time required to reach
250 °C with closed air flap
and voltage 230 V
Electricity
max. power input
cca kW
0,92
1,2
1,8
1,8
3,6
- mains 50/60 Hz
stand by
cca W
5
5
5
5
5
5
current
A
4,0
5,2
7,8
7,8
3,9; 3,9; 7,8
3,9; 7,8; 7,8
10,4
15,7
15,7
nominal voltage
V
10,4; 6,8; 10,4
10,5; 13,5; 10,5
20,8; 13,6; 20,8
21; 27; 21
230
230
230
230
3x400+N+PE
3x400+N+PE
115
115
115
115
3x230
3x230
3x115
3x115
*) Approx. 50 % of the tray area can be filled in a way a uniform air circulation is enabled inside the chamber.
Note: All technical data are related to 22 °C ambient temperature and ± 10 % voltage swing (if not specified).
Changes in the design and make reserved.
MMM Medcenter
Einrichtungen GmbH
Semmelweisstraße 6
D-82152 Planegg / München
F.R.Z.
tel.: +49 89 89 92 26 20
fax: +49 89 89 92 26 30
e-mail: medcenter@mmmgroup.com
http://www.mmm-medcenter.com
ECOCELL – 02/2011 – EN/0376
Photo & design T. Benda
F.R.Z.
CMYK
CMYK