1. M. Kamran Bashir, M.Sc. (Civil/Structural), B.Sc. (Civil) Page 1 of 5
Muhammad Kamran Bashir
MSc. (Civil-Structural Engg.), B.Sc. (Civil Engg.)
Project Management Professional (PMP)
LEED AP BD+C
Autodesk Revit Structure Certified Professional
Date of Birth: 18-06-1981 Place of Birth: United Arab Emirates.
Address: Bld. # F31, Exit #07, Riyadh, Kingdom of Saudi Arabia Email: kamranbashir_ce@yahoo.com.
Skype ID: kamranbashir_ce Cell #: +966-5919-74338
An accomplished Civil & Structural Engineer with more than 12 years‐11Months (with 6 years‐3 months in KSA in a
senior position in design office) of diversified experience in handling High End Projects in Asia and Middle East
with specific proficiency in Design &Team Management/Procurement/Planning/Scheduling/Structural
Analysis/Design/Review/Value Engineering, Site Construction & Construction Support Assistance of variety of
Residential, Commercial, Healthcare, Educational & Industrial‐Concrete and Steel Structures.
Areas of Expertise:‐
 Management & Coordination Skills: Planning & Implementation, Costing & Budgeting, Contract
Administration, Tendering, Procurement, Technical Evaluation, Quality Check, Target Setting/
Achievement. Successful leadership experience in successfully driving large‐scale complex projects to
completion within allocated budget & time schedule while maintaining smooth coordination in a multi‐
cultural organization & liaising with International Partners, Clients & other Project Stakeholders.
Providing Technical assistance during Post‐Design and Construction Stage of Large Projects.
 Structural Design/Review Skills (Concrete): Structural Analysis/Design/Review/Value Engineering of
Large Scale Commercial/Residential/Educational/Community/Healthcare & Mixed Use Development
Projects with variety of Gravity & Lateral Systems based on the Spans, Seismic & Wind Parameters of
the region, various foundation systems including Combined, Raft, Piles & Pile‐Raft‐Foundations, Static
Equipment Foundations, Domes, Corbels, Retaining Walls, Boundary Walls, Water Tanks, HFO Tank
foundations, etc.
 Structural Design/Review Skills (Steel): Structural Analysis/Design/Review of Steel Structures
forming a significant part of Concrete Structures including, but not limited to, Steel Roof Systems,
Pyramids, Trusses, Hanger‐Systems for Large Span Cantilevered‐Roof‐Trusses, Industrial Ware
Houses, Crane Runway Girders, Parking Sheds, Open Web Joists, Brackets, Main Supports for Curtain
Wall Systems, etc
 Software Skills: ETABS, SAFE, SAP, Revit‐Structure, Navisworks Manage(for Clash Detection Report),
All Piles, STAAD PRO, CSI‐COL, MS Project, Primavera P6, AUTOCAD, MS Word, Excel, etc.
 Code Familiarization: International Building Code (IBC), American Society of Civil Engineers (ASCE),
American Concrete Institute Code (ACI), Saudi Building Code (SBC), American Institute of Steel
Construction (AISC), American Petroleum Institute Standard (API 650).
 Personal Qualities: Friendly, Cooperative, Adaptive, Flexible, Strong Leadership Skills, Pro‐Active &
ready to accept challenges.
DAR Engineering, Riyadh, Saudi Arabia Dec 2013‐ Present
Job Title: Lead Engineer‐Civil Structural Design
Highlights:‐
 Managing a team of 22 members within Head Office & offshore offices, for numerous
Residential/Commercial/Healthcare and Public Sector Projects with a Total Design‐Contract Value
worth approx. 230 Million SARs to ensure completion, as per Scope of Work, within allocated
Budget/Resources & Time Schedule along with client satisfaction and successful Peer Reviews.
 Dynamically managing all the Technical and Administrative Matters of the Department in Head Office
and Offshore Branches from Pre‐Bid Design to Post Design Construction Stage.
Key Responsibilities:‐
 Handle the entire gamut of departmental operations and providing Technical‐Specialist insight towards
engineering operations of multi‐dimensional projects during Design and Construction Stage to ensure
glitch free operations.
PROFESSIONAL EXPERIENCE
PROFILE SUMMARY

2. M. Kamran Bashir, M.Sc. (Civil/Structural), B.Sc. (Civil) Page 2 of 5
 Establish work plans/priorities for teams within the Head office and offshore branches to ensure
successful completion of the project within the specified budgetary guidelines and quality standards.
 Participating in Executive Level Meetings to Report Progress Achieved vs. Resources used, identifying
bottlenecks, and providing solutions to drive the projects to successful completion.
 Review schedules of new projects to identify optimum usage of resources, establish resources required
to execute the design and supervise stage‐wise list of deliverables based on contractual obligations and
ensure conformance of design package to Engineering Standards.
 Lead technical discussions/Face to Face Meetings/ Video Link conferences with project stakeholders
including Clients, Project Management Consultants, International Partners, and contractors offering
technical oversight during design and construction stage and identifying value‐engineering
opportunities.
 Supervising Procurement Operations related to the Department and technical evaluation of
Specialists/Suppliers/Contractors to meet the project needs as per project Scope of Work.
 Oversee the preparation of Basis of Design Reports, 20% 30% 65% and 100% Design Packages, Structural
System Development & Calculations, BOQs, specifications, and ensuring completion as per contract,
and check conformance to governing local/international codes and standard engineering practices.
DAR Engineering, Riyadh, Saudi Arabia Aug 2010‐ Dec 2013
Job Title: Civil Design Engineer
Key Projects to Credit:‐
 27 Storey Hotel & Office Tower, Jeddah, KSA
Responsible for the overall design of the Project, worth 170 Million SARs, from Concept Design to
Construction Documents and passed a peer review done by 3rd
Party in UAE. The architecture was done by
UAE Based Company, with an area of 36,200m2
, comprising of 27 floors with 02 basements built out of
concrete, a 12m high cantilevered steel structure at roof level to support a Glass Curtain Wall and 15m
projected steel entrance canopy at First Floor Level .The Tower sub structure solution provided was Pile &
Pile‐Raft Foundation.
 28 Storey Apartment Tower, Jeddah, KSA
Responsible for the overall design of the Project, worth 180 Million SARs, from Concept Design to
Construction Documents and passed a peer review done by 3rd
Party in UAE. The Architectural design was
done by UAE Based Company, with an area of 37,500m2
, comprising of 28 floors with 02 basements built
out of concrete, a 13m high cantilevered steel structure at roof level to support a Glass Curtain Wall. The
Tower Sub structure was Pile & Pile‐Raft Foundation.
 12 Storey Cancer Tower at King Fahad Medical City, Riyadh, KSA
Led the Project Team, with a cost frame of 438 Million SARs, from Concept Design to Construction
Drawings Stage including Successful peer review done by US Consultants. The architecture was by a
Leading US‐Company with a total area of 42,284m2
with 11 floors built out of concrete and roof consisting
of open web joist system and a connecting roof of Steel Hanger System spanning 37m with a 6m cantilever
at the front end. The sub structure system was calculated in Raft Foundation with Drops.
 12 Storey Neuro Tower at King Fahad Medical City, Riyadh, KSA
Led the Project Team, with a cost frame of 647 Million SARs, from Concept Design to Construction
Drawings Stage including Successful peer review done by US Consultants. The architecture was done by a
Leading US‐Company and had a total area of 66,144m2
with 11 floors built out of concrete and roof
consisting of open web joist system covering a mechanical penthouse. The sub structure system was a Raft
Foundation with Drops.
 6 Storey Laboratory at King Fahad Medical City, Riyadh, KSA
Responsible for the Project worth 413 Million SARs , from Concept Design to Schematic Design Stage
including Successful peer review done by US Consultants at Concept Design Level. The architecture was
done by a Leading US‐Company had a total area of 53,705m2
with 06 floors constructed on an existing
concrete structure.
 King Faisal Medical City Patient Tower, Al Jouf, KSA
Responsible for developing the Concept Design, narrated by US Based Consultants, upto the Construction
Documents Stage, for a total area of 145,337m2
with a total cost of 1.23 Billion SARs.
The tower comprised of 16 floors built of Cast‐in‐Place concrete having spans up to 12.8m with all design
phases including peer reviews done by US Consultants. The sub structure solution was provided in Raft‐
Foundation with Drops.

3. M. Kamran Bashir, M.Sc. (Civil/Structural), B.Sc. (Civil) Page 3 of 5
 Linear Accelerator & Proton Therapy Facility at King Fahad Medical City, Riyadh, KSA
Responsible for producing the Concept Design leading to Schematic Level Design for 02 Level Specialized
Linear Accelerator Facility built in Cast in Place Concrete, with a total area of 5,155m2
and cost frame of 271
Million SARs designed(Architectural) by US Based Architects and planned by medical specialists.
 2 Storey Parking Facility with Landscape Features at King Fahad Medical City, Riyadh, KSA
Responsible for the Project worth 130 Million SARs from Concept Design to Schematic Design Stage
including Successful peer review done by US Consultants. The Cast in Place Concrete structure had a total
area of 41,171m2
with 02 levels of parking supporting landscaping features at roof level.
 Atrium at King Fahad Medical City, Riyadh, KSA
Responsible for producing the Concept Design of 04 Storey High Steel Atrium, designed (Architectural) by
US Based Architects, having a total area of 8,454m2
with a cost frame of 105 Million SARs. The atrium
comprised of a 12.8 x 12.8 grid system framed with open web joist systems in Structural Steel supported on
Steel Columns.
 Cochlear Implant Center at King Fahad Medical City, Riyadh, KSA
Responsible for the overall design of the Project, worth 81 Million SARs, from Concept Design to
Construction Documents and passed a peer review done by Irish Consultants. The medical center was
designed by Ireland Based Architects, with an area of 8,838m2
, comprising of 04 floors plus 01 basement
built out of concrete and roof built out of structural steel. The sub structure solution was designed isolated
foundations connected with grade slab.
 King Faisal Medical City Patient Tower, ABHA, KSA
Responsible for developing the Concept Design, narrated by US Based Consultants, up to the Construction
Documents Stage, for a total area of 145,337m2
with a total cost of 1.23 Billion SARs. The tower comprised
of 16 floors built of Cast‐in‐Place concrete with spans up to 12.8m with all design phases including peer
reviews done by US Consultants. The sub structure solution was calculated as Raft‐ Foundation with Drops.
 2 Storey Elliptical Shaped Mosque at King Fahad Medical City, Riyadh, KSA
Developed the Concept Design of an Elliptical Shape Concrete Dome having a 46m span in major axis, 43m
span in minor axis supported on vertical piers along the outer periphery and a height of 24m with a total
area of 3,608m2
and an overall cost of 14 Million SARs.
 Design Review of HFO Tank Foundation, at Yanbu Power & Desalination Plant
Reviewed the Design of Heavy Fuel Oil Tank‐Foundations to be constructed in Power and Desalination Plant
in Yanbu, KSA.
Highlights:‐
 Instrumental in successful delivery of prestigious design projects during initial stages of a newly
established business unit.
 As a Senior, provided overall direction related to technical and administrative matters of the
department, supervised & single handedly designed prestigious projects with International Consultants
to meet Project requirements and received appreciation of work from various clients.
 Planned, Organized, Designed, Controlled and Coordinated Mega projects from Concept Design Stage
to Construction Drawing Package till project Completion and Tender process and provided supervision
services where required.
 Provided Design and construction support assistance and alternate solutions to contractors during
construction stages of the projects.
Key Responsibilities: ‐
 Assessed the requirements of Large Scale Projects based on contractual obligations and worked with
other engineers to define the scope of work, budget and staffing.
 Defined project objectives/ plans, including delineation of scheduling, set performance requirements
and assigning field‐specialists.
 Monitored/ directed the assigned project resources to overcome triple constraints‐ project scope, time
and cost.
 In addition to Lead Responsibilities, Prepared Engineering Design Criteria/ Basis of Design Reports
Schematic Designs leading to Construction Design Documents for Concrete/Steel Structures for
prestigious Projects worth up to 2.2 Billion SARs and defended design work in Peer Reviews done by
International Consultants, from USA, Ireland & UAE, through Video Conferences and Face‐to‐Face
Meetings.

4. M. Kamran Bashir, M.Sc. (Civil/Structural), B.Sc. (Civil) Page 4 of 5
 Assumed leadership of a project team as a lead civil/structure engineer and assured smooth
coordination, of all the design related matter, with all disciplines and Counterparts of International
Partners for successful completion of the project.
 Provided project technical review at various stages throughout project design and recommended
alternate structural solutions based on design changes through various project design and construction
phases to overcome construction restraints.
 Provided necessary support to Tender Department for preparing Technical and Commercial offers for
new projects. This includes technical evaluation of RFPs received from the client for preparing Scope of
Work and Resource Requirements, etc.
United Construction Company, Islamabad, Pakistan Sep 2005‐ July 2010
Assistant Manager (Civil/Design)
Key Projects to Credit:
 3 Storey Islamabad Technical Complex, Islamabad, Pakistan (Concrete + Steel Structure)
 4 Storey Residential Facility for Officers, Attock, Pakistan (Concrete Structure)
 3 Storey Office Building for Technical & Administrative Facilities, Islamabad, Pakistan (Concrete
Structure)
 5 Storey Serum Laboratory for National Institute of Health, Islamabad, Pakistan (Concrete Structure)
 4 Storey Residential Flats for Staff, Fateh Jang, Pakistan (Concrete Structure)
 4 Storey Trade Surgical Cotton & Medicines, I‐10/3 Islamabad, Pakistan (Concrete Structure)
 2 Storey Mechanical Instrumentation Block, Karachi Cantt, Pakistan (Concrete Structure)
Highlights:
 Provided complete technical support to complete structural design from Concept Design Stage to
Construction Drawing Package.
 Provided construction supervision to designed projects to ensure compliance of contractors work to
project specifications, design standards and time schedule.
Key Responsibilities:
 Assisted in Managing the full range of technical aspects from Concept Design Narration, in coordination
with all disciplines, to the Construction Drawings Package.
 Structural Analysis and Design of various Concrete and Steel Structures by Gravity & Equivalent Static
Analysis with estimated cost ranging from 10.0 Million PKR to 3.65 Billion PKR in coordination with
Senior Structural Engineers and providing construction support at site to ensure conformance to
design.
 Developed gravity and lateral systems for various facilities complying with the latest Codes, Standards
and Corporation’s requirements.
 Analyzed contracts including managing risk of contractual obligations relating to projects and handled
technical documents for the control of planned output, and ensured design documents are vetted from
concerned authorities.
 Developed 3D‐Structural Models, Drawings and calculations for various concrete and steel structures
for all stages of the project.
Design & Management Group, Islamabad, Pakistan Jan 2004‐ Aug 2005
Job Role: Site Engineer (Consultant‐Side) & Trainee Structural Engineer
Job Title: Site Engineer
Key Projects to Credit:
 3 Storey Shaheen School System for PAF, E‐9 Sector Islamabad, Pakistan ‐ as a Site‐Engineer
 Developed 3D Structural Models, in STAAD Pro, for 04‐Storey Islamabad Boxing Gym, Islamabad,
Pakistan ‐ as a Trainee Structural Engineer
Key Responsibilities:
 Delivered all aspects of the engineering service on‐site with the Engineering Supervision team from the
phase of formwork to concrete followed by checking BOQs/Bar Bending Schedules, Quality checking
finishes and final handing over.
 Supervised construction activities on site to ensure compliance of work done by contractor to Project
Schedule, Design Requirements and Specifications.
 Operated and promoted a high standard of health and safety and environment compliance, ensuring
work is executed in a safe manner meeting legal guidelines.
 Resolved any unexpected technical difficulties and other problems that may arise at any time, and
supervised the daily workload of construction operations to ensure compliance with design documents.
 Developed 3D Structural Models of Concrete structures in STAAD Pro to assist structural design team in
Head Office.

5. M. Kamran Bashir, M.Sc. (Civil/Structural), B.Sc. (Civil) Page 5 of 5
Free Lance Structural Engineer Feb 2006 ‐ Aug 2010
 Worked for various architects, consultants having clients like International Labor Organization (ILO),
Save Our Souls (SOS), Save the Children, Pakistan Tourism Development Corporation (PTDC), etc. for
Residential/Community/Educational and Recreational Projects Designed in Concrete and Steel (The
complete list of projects can be provided if required). This included providing comprehensive Structural
Design Calculations, Drawings and all related Design Documents to get approvals from the vetting
authorities including the Structural Design Representatives of NGOs, Capital Development Authority
(CDA), National Engineering Services of Pakistan (NESPAK), Earthquake Rehabilitation and
Reconstruction Authority (ERRA).
Master's degree in Civil/Structural Dec 2009
Grade: 3.83 out of 4.00
Bachelor's degree in Civil Engineering Feb 2004
Grade: 74.78 out of 100
 Project Management Professional PMP (Certification)
Institute: Project Management Institute‐ USA.
 LEED AP BD+C (Certification)
From: US Green Building Council (Score 88.5%)
 Auto Desk Certified Professional Revit Structure 2015 (Certification)
Institute: Autodesk‐USA (Score 94%)
 I am a Specialist, Level‐2 (Score ‐ 84%) (Training)
Institute: Alfanar Construction Training Dept. Attended in: June 2013 (24 hrs. approx.)
 I am a Specialist Level‐1 (Score ‐ 72%) (Training)
Institute: Alfanar Construction Training Dept. Attended in: May 2012 (24 hrs. approx.)
 MS Project 2007 (Training)
Institute: Global Institute Academy of Engineering Solutions Attended in: May 2010 (60 hrs. approx.)
 Primavera P6 (Training)
Institute: Global Institute Academy of Engineering Solutions Attended in: May 2010 (60 hrs. approx.)
 Use of Seismic Hazard Analysis in Structural Design (Training)
Institute: University of Illinois USA & UET Peshawar Attended in: August 2008 (08 hrs. approx.)
 Quality, Safety, Health and Environment Professional, IQMS in Association with DAS. (Certificate)
Duration: 23rd
Oct.‐2009 to 23rd
Jan.‐2010
Project Management Institute‐USA
Membership ID: 4235397
Member since: August 2015
Saudi Council of Engineers‐KSA
Membership/Role: Registered Member
Member since: September 2010
Pakistan Engineering Council‐Pakistan
Membership/Role: Life Time Membership as a Professional Engineer
Member since: March 2004
MEMBERSHIPS
EDUCATION
TRAININGS & CERTIFICATIONS