1. P.MITHUN CHAKRAVARTHY
Contact no.: +91 9551920024
E-mail: mithun.chakravarthy028@gmail.com
________________________________________________________
OBJECTIVE:
Work in core sectors of Naval Architecture and Offshore Engineering background to work hard
for company progress and simultaneously improve my skills.
QUALIFICATION:
Completed B.E. Naval Architecture and Offshore Engineering at the Academy of Maritime
Education & Training (AMET) University, Chennai
Name of the Institution Graduation &
Schooling
Percentage of
Marks
Year of Passing
Academy of Maritime
Education & Training,
Chennai.
Fourth Year
Naval Architecture
8.20 CGPA 2011-2015
St .Mary’s A. I. Hr. Sec.
School,
Chennai.
HSC 69.92% 2010-2011
St .Mary’s A. I. Hr. Sec.
School,
Chennai.
SSLC 77.8% 2008-2009
PROFESSIONAL WORK EXPERIENCES:
 Summer Intern
 VIPUL SHIPYARD PVT.LTD, GOA.
May 2013 – June 2013 for One month
Underwent training in the following departments
- Ship construction Site (SCS)
- Block Making Site
- Design Department
- System Integration Department
- Ship repair and Piping.

2.  SKA MARINE SERVICES PVT. LTD. CHENNAI
June 2014- July 2014 for One month
Underwent training in the following departments
. - Basic Hull Design. (TRIBON)
- Detail Design. (TRIBON)
- General Arrangement and Structural Outfit Items.
- Fit up Drawing.
- Inclining Weight.
- Electrical Load Chart and Stability Booklet.
- Worked on ASFIT Drawings for INDIAN NAVY Dredging Ship in
TEBMA Shipyard.
 L&T SHIPBUILDING PVT. LTD., CHENNAI
(Under Third Party)
22-June 2015 – Continuing Till now
 11 Months experience in 3D modeling software of NUPAS CADMATIC in the post
of Junior Engineer.
 Worked in General Arrangement, Accommodation Layout, and Equipment
Foundations, Production Drawing, HVAC Routing and Modeling in Hull Outfit
departments with both basic and detail design.
 Worked in weight estimation of ship with loading and unloading calculations.
 Rudder, A-Bracket & P-Bracket Design and Calculations.
 CADMATIC EXPOSITION
 3D Modeling of Hull outfit Equipment’s like Hatch’s, Manhole’s, Ladders and
production drawing extraction for all the same.
 3D Modeling of Accommodation items like all Furniture items, Galley items and
production drawing extraction for the same.
 3D Modeling of HVAC items like Dampers, Diffusers, ATU, AHU in Parametric
modeling, HVAC ducting and routing.
 3D Modeling of Engineering Equipment’s like Air compressor, STP, Auxiliary
Machinery and etc,. And Pipeline routing for Scupper system with calculation and
production drawing extraction for the same.
 3D modeling of Equipment foundations with BOM extraction and production drawing
extraction.
 Admin Control and support for input of data’s.
 NAVAL ARCHITECTUE EXPOSITION
 Weight estimation of ship with VCG and LCG checks.
 Stability check with loading and unloading calculations.
 Basic strength calculations for equipment’s supports.
 Rudder design with aero-foil section calculations.
 Hull Scantling calculations for shell expansion plan.
 Propeller Support like A-Bracket and P-Bracket calculations and design.
 GENERAL ARRANGEMENT(GA) and HULL OUTFIT EXPOSITION
 Worked on whole GA of Diving Support Craft with the Owner’s requirements.
 Accommodation layout and whole furniture list estimation.
 Placing of manholes and hatches with their requirements and Access plan.

3.  HVAC EXPOSITION
 Basic design and estimation of heat load calculation of varies compartment in ships
like Engine Room, DG Room,…etc.
 Flow rate estimation of varies compartment in ships.
 Material required for the ducting estimation and there duct and deck fitting
equipment’s.
 Production drawing extraction and annotation with full requirements submitted to
the yard for production.
 Detail design and routing of ducting in all compartments including Accommodation
spaces and Machinery spaces.
TECHNICAL SKILLS:
 Microsoft office (Word, PowerPoint, Excel).
 AVEVA MARINE TRIBON SP6 (Ship design software).
 DNV SESAM (Offshore Design & Analysis software).
 AUTOSHIP (Ship design software).
 AUTOCAD 2013 (2D&3D).
 NUPAS CADMATIC. (3D Modeling software)
 RHINOCEROS (Ship design software).
AREA OF INTEREST:
 Small crafts and naval vessels.
 Ship/Offshore Structure Construction and Design and Repair.
 Surveys of Ships/Offshore Structure.
 Stability of floating bodies.
 Model making of ships.
 Resistance and Powering Calculation.
MINOR PROJECT
 Studied about DIESEL ELECTRIC PROPULSION SYSTEM in Ships.
a. Basic requirements and the history of this system.
b. Case study with other propulsion systems.
c. Powering calculations.
d. Propeller efficiency.
e. Thrust reducing factor.
MAJOR PROJECT
 Completed Basic Design of 4000T DWT PLATFORM SUPPLY VESSEL in SKA
MARINE SERVICES PVT.LTD.
a. Parent Ship analysis.
b. Fixing of ship particulars.
c. Lines plan and initial GA.
d. Deadweight check.
e. Scantling and shell expansion plan.
f. Stability check with loading and unloading calculations.
g. Rudder and Powering calculations.

4. STRENGTHS:
 An extrovert and with full of energy and enthusiasm and carry a positive energy.
 Good analytical skills and a quick learner.
 Good leadership qualities and always maintain my discipline.
PROFESSIONAL MEMBERSHIP:
 Student Member of ROYAL INSTITUTION OF NAVAL ARCHITECTS (RINA), London,
UK. Membership number – 00356043.
ACHIEVEMENTS
 Organizer and Events Head for MERDITH’14 (Technical Symposium) in AMET
University.
 In charge for Disciplinary Comity Team (2013-2014).
 Competed and won prizes in district & zonal level March-past.
PERSONAL INFORMATION:
 Date of Birth: 09th
- MAY- 1994
 Father’s Name: K. PANNEER SELVAM
 Languages known: English, Hindi (Basic), Tamil.
 Interests: Cricket, Driving, Planting Trees and Music.
 Address: NO. 2/15, PONDICHERRY MURGASAN STREET,
OLDWASHERMENPET,
CHENNAI - 600021
 Passport No: M8323341
 Contact no: +91-9551920024
 E-mail: mithun.chakravarthy028@gmail.com
REFERENCES:
Available upon request

5. DECLARATION:
I hereby declare that all the details furnished above are true to the best of my knowledge and belief.
Place: CHENNAI. P.MITHUN CHAKRAVARTHY