1. MC-CIH06 REV.11
Internal Hexagon Product Catalog, 2014
Internal Hexagon
Product Catalog, 2014
To learn more about M IS
visit our website :
www.mis-implants.com
or scan the QR Code
2. MIS’ Quality System complies
with international quality
standards: ISO 13485:2003
- Quality Management
System for Medical Devices,
ISO 9001: 2008 – Quality
Management System and CE
Directive for Medical Devices
93/42/EEC. MIS’s products
are cleared for marketing in
the USA and CE approved.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be
transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
7. Implant Systems.
MIS proudly offers a wide range of implant systems, providing simple
solutions for all clinical scenarios, from the basic to the most complex.
Each and every implant design is based on long history of research and
development. All implants are made of biocompatible, medical grade,
Titanium Alloy. The surface of all MIS implants is roughened by both sand
blasting and acid-etching, promoting long lasting osseointegration. MIS
adheres to the most stringent international quality standards, complying
with ISO 13485: 2003 Quality Management System for Medical Devices.
Products that appear in this catalog are CE approved and FDA cleared
for marketing.
MIS SEVEN self-tapping implants are designed for a wide range of bone types and bone augmentation
procedures. Their unique geometric design features dual threads, three spiral channels stemming
from the apex, micro-rings on the implant neck and a large pitch thread design. Following our
commitment to Make It Simple, MIS was the first company to include a sterile, single-use final
drill with each and every SEVEN implant, to ensure a safer and more accurate drilling procedure.
MIS M4 implants combine a cylindrical and conical body shape with V-shaped threads. It is
designed for either two-stage or single-stage surgical procedures. The cylindrical shape provides
excellent primary stability. The self-tapping thread design, three spiral channels and flat cutting
apex, make M4 implants the ideal choice for use in dense bone.
UNO One Piece implants are mainly indicated for the restoration of narrow ridges and tight spaces,
where augmentation is either contraindicated or not feasible. Specific indications may include
single or multiple missing teeth in the anterior mandibular area and restoration of maxillary lateral
incisors. Thanks to their advanced double-thread geometry and recognized surface technology,
UNO implants allow for a quick and effortless placement and long lasting osseointegration.
8. 8.
NARROW
®
Screw type implants range
Narrow Platform
6mm
Length
8mm
10mm
11.50mm
13mm
16mm
MF7-13330
MF7-16330
Type
MF7-10330
MF7-11330
Ø3.30
mm
Surgical tools
(For more information please refer to page no. 45-46)
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP
Implant cover screw
healing caps
Available for heights: 2,3,4,6,8mm
Ø 4mm
2/3/4/6/8mm
MC1-00330
MH-N2330
MH-N3330
MH-N4330
MH-N6330
MH-N8330
Ø 4.3mm
2/3/4/5/6
MH-52330
MH-53330
MH-54330
MH-55330
MH-56330
9. ®
Ø3.30mm
Narrow Platform
Dimensions
Catalog No.
Ø 3.30mm
length 10mm
MF7-10330
SEVEN internal hex. implant
Ø 3.30mm
length 11.50mm
MF7-11330
NARROW
MF7-13330
Sand Blasted and Acid-Etched
Ø 3.30mm
length 13mm
MF7-16330
Titanium Alloy Ti 6Al 4V ELI
Ø 3.30mm
length 16mm
2.10
Ø 3.30
Ø 3.20
L
Final Drill
Ø 2.20
Ø 2.40
A specially designed final drill for 10, 11.5,
13 and 16mm implants is supplied with
every implant, allowing a for an easier and
safer drilling procedure.
Ø3.30mm Implant Procedure
Drilling Speed (RPM)
12001500
Diameter
Ø1.90
Ø2.40
200400
9001200
Ø2.40
15-25
Ø2.20
Ø3.20
Ø3.30
Final drill
For bone
type 12
Do not use the final drill for
bone types 34
The drilling sequence is
demonstrated with a 13mm implant.
Procedures recommended by MIS cannot
replace the judgment and professional
experience of the surgeon.
10. 10.
STANDARD
®
Screw type implants range
Standard Platform
6mm
8mm
10mm
MF7-08375
Length
11.50mm
MF7-10375
13mm
16mm
MF7-13375
MF7-16375
Surgical tools
Type
MF7-11375
(For more information please refer to
page no. 45-46)
Ø 3.75
mm
MT-HLI10
Long insertion tool,
int. hex. connection
MF7-06420
MF7-08420
MF7-10420
MF7-11420
MF7-13420
MT-HSI10
MF7-16420
Short insertion tool,
int. hex. connection
Ø 4.20
mm
MT-SRA10
Square connection to
ratchet adapter
MT-SHA10
Hand wrench
square connection
Implant cover screw
healing caps
Available for heights: 3,4,5,6mm
MC1-00375
Ø 4mm
3/4/5/6mm
Ø 5.5mm
3/4/5/6mm
MH-03375
MH-04375
MH-05375
MH-06375
MH-53375
MH-54375
MH-55375
MH-56375
11. ®
Catalog No.
Ø3.75mm
Standard Platform
Dimensions
MF7-08375
Ø 3.75mm
length 8mm
SEVEN internal hex. implant
Ø 3.75mm
length 10mm
MF7-10375
MF7-11375
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
Ø 3.75mm
length 11.50mm
MF7-13375
STANDARD
Ø 3.75mm
length 13mm
2.45
Ø 3.75mm
length 16mm
MF7-16375
Ø 3.60
Ø 3.75
L
Final Drill
Ø 2.80
A specially designed final drill for 8, 10,
11.5, 13 and 16mm implants is supplied
with every implant, allowing for an easier
and safer drilling procedure.
Ø 3.10
Ø3.75mm Implant Procedure
Drilling Speed (RPM)
12001500
Diameter
Ø1.90
Ø2.40
200400
500700
9001200
Ø2.40
Ø2.80
Ø2.80
200500
Ø2.80
Ø3.60
Ø3.75
15-25
Ø3.75
OR
Final drill
For bone
type 12
MT-GDN33
Countersink
For bone
type 34
Do not use the final drill for
bone type 34
The drilling sequence is
demonstrated with a 13mm implant.
Procedures recommended by MIS cannot
replace the judgment and professional
experience of the surgeon.
12. 12.
®
STANDARD
Ø4.20mm
Standard Platform
Catalog No.
Dimensions
MF7-06420
Ø 4.20mm
length 6mm
SEVEN internal hex. implant
Ø 4.20mm
length 8mm
MF7-08420
MF7-10420
Ø 4.20mm
length 10mm
MF7-11420
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
Ø 4.20mm
length 11.50mm
2.45
Ø4.20
Ø4.10
MF7-13420
Ø 4.20mm
length 13mm
MF7-16420
Ø 3.75
Ø 4.20mm
length 16mm
0.4mm
L
Final Drill
Ø3.30
A specially designed final drill for 6, 8, 10,
11.5, 13 and 16mm implants is supplied
with every implant, allowing for an easier
and safer drilling procedure.
Ø 3.70
Ø4.20mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
500700
Ø2.40
Ø2.80
Ø3.20
200400
400700
Ø3.20
200500
Ø3.30
Ø4.10
Ø3.30
Ø4.20
15-25
Ø4.20
OR
Final drill
For bone
type 12
MT-GDN33
Countersink
For bone
type 34
Do not use the final drill for
bone types 34
The drilling sequence is
demonstrated with a 13mm implant.
Procedures recommended by MIS cannot
replace the judgment and professional
experience of the surgeon.
13. WIDE
®
Screw type implants range
Wide Platform
6mm
8mm
10mm
MF7-06500
Length
MF7-08500
11.50mm
MF7-10500
13mm
16mm
MF7-13500
MF7-16500
Surgical tools
Type
MF7-11500
(For more information please refer to
page no. 45-46)
Ø5
mm
MT-HLI10
Long insertion tool,
int. hex. connection
MF7-06600
MF7-08600
MF7-10600
MF7-11600
MT-HSI10
MF7-13600
Short insertion tool,
int. hex. connection
Ø6
mm
MT-SRA10
Square connection to
ratchet adapter
MT-SHA10
Hand wrench
square connection
Implant cover screw
healing caps
Available for heights: 3,4,5mm
MC1-00470
Ø 5mm
MH-W3500
MH-W4500
MH-W5500
3/4/5mm
Ø 6.5mm
3/4/5mm
MH-W3630
MH-W4630
MH-W5630
14. 14.
WIDE
®
Catalog No.
MF7-06500
Ø5mm
Wide Platform
Dimensions
Ø 5mm
length 6mm
SEVEN internal hex. implant
Ø 5mm
length 8mm
MF7-08500
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-10500
Ø 5mm
length 10mm
MF7-11500
Ø 5mm
length 11.50mm
2.45
Ø 4.90
Ø5
Ø 5mm
length 13mm
MF7-13500
Ø 4.50
0.4mm
L
Final Drill
Ø 5mm
length 16mm
MF7-16500
A specially designed final drill for 6, 8, 10,
11.5, 13 and 16mm implants is supplied
with every implant, allowing for an easier
and safer drilling procedure.
Ø 4.50
Ø 4.10
Ø5mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
500700
Ø2.40
400700
Ø2.80
Ø3.20
Ø4
200400
300500
Ø4
200500
Ø4.10
Ø 4.90
Ø5
15-25
Ø5
OR
Final drill
For bone
type 12
MT-GDN50
Countersink
For bone
type 34
Do not use the final drill for
bone types 34
The drilling sequence is
demonstrated with a 13mm implant.
Procedures recommended by MIS cannot
replace the judgment and professional
experience of the surgeon.
15. ®
Catalog No.
Ø6mm
Wide Platform
Dimensions
MF7-06600
Ø 6mm
length 6mm
SEVEN internal hex. implant
Ø 6mm
length 8mm
MF7-08600
WIDE
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-10600
Ø 6mm
length 10mm
MF7-11600
Ø 6mm
length 11.50mm
2.45
Ø6
Ø 5.90
Ø 4.50
Ø 6mm
length 13mm
MF7-13600
0.4mm
L
Final Drill
Ø 5.10
A specially designed final drill for 6, 8, 10,
11.50 and 13mm implants is supplied with
every implant, allowing for an easier and
safer drilling procedure.
Ø 5.50
Ø6mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
500700
Ø2.40
400700
300500
300500
Ø2.80
Ø3.20
Ø4
Ø4.50
Ø5
200400
300500
Ø5
200500
Ø5.10
Ø 5.90
Ø6
OR
Final drill
For bone
type 12
MT-GDN50
Countersink
For bone
type 34
15-25
Ø6
16. 16.
NARROW
Screw type implants range
Narrow Platform
6mm
Length
8mm
10mm
11.50mm
13mm
16mm
MF4-13330
MF4-16330
Type
MF4-10330
MF4-11330
Ø3.30
mm
Surgical tools
(For more information please refer to page no. 45-46)
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP
Implant cover screw
healing caps
Available for heights: 2,3,4,6,8mm
Ø 4mm
2/3/4/6/8mm
MC1-00330
MH-N2330
MH-N3330
MH-N4330
MH-N6330
MH-N8330
Ø 4.3mm
2/3/4/5/6
MH-52330
MH-53330
MH-54330
MH-55330
MH-56330
17. NARROW
Ø3.30mm
Narrow Platform
Dimensions
Catalog No.
Ø 3.30mm
length 10mm
MF4-10330
M4 internal hex. implant
Ø 3.30mm
length 11.50mm
MF4-11330
MF4-13330
Sand Blasted and Acid-Etched
Ø 3.30mm
length 13mm
MF4-16330
Titanium Alloy Ti 6Al 4V ELI
Ø 3.30mm
length 16mm
2.10
Ø3.30
L
Ø 2.65
Ø3.30mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
500700
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.00
Ø3.30
Ø3.30
OR
For bone
type 12
MT-CSN33
Countersink
For bone
type 34
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
18. 18.
STANDARD
Screw type implants range
Standard Platform
6mm
8mm
10mm
MF4-08375
Length
11.50mm
MF4-10375
13mm
16mm
MF4-13375
MF4-16375
Surgical tools
Type
MF4-11375
(For more information please refer to
page no. 45-46)
Ø 3.75
mm
MT-HLI10
Long insertion tool,
int. hex. connection
MF4-06420
MF4-08420
MF4-10420
MF4-11420
MF4-13420
MT-HSI10
MF4-16420
Short insertion tool,
int. hex. connection
Ø 4.20
mm
MT-SRA10
Square connection to
ratchet adapter
MT-SHA10
Hand wrench
square connection
Implant cover screw
healing caps
Available for heights: 3,4,5,6mm
MC1-00375
MC1-00375
MC1-00375
MC1-00375
3/4/5/6mm
3/4/5/6mm
3/4/5/6mm
3/4/5/6mm
Ø 4mm
Ø 4mm
Ø 5.5mm
Ø 5.5mm
MH-03375
MH-04375
MH-03375
MH-05375
MH-04375
MH-06375
MH-05375
MH-06375
MH-53375
MH-53375
MH-54375
MH-54375
MH-55375
MH-55375
MH-56375
MH-56375
19. STANDARD
Ø3.75mm
Standard Platform
Catalog No.
Dimensions
MF4-06375
Ø 3.75mm
length 6mm
MF4-08375
Ø 3.75mm
length 8mm
MF4-10375
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
Ø 3.75mm
length 10mm
MF4-11375
M4 internal hex. implant
Ø 3.75mm
length 11.50mm
2.45
Ø 3.75
Ø 3.75mm
length 13mm
MF4-13375
L
Ø 3.75mm
length 16mm
MF4-16375
Ø3
Ø3.75mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
500700
400700
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.20
Ø3.75
Ø3.75
OR
For bone
type 12
MT-GDN33
Countersink
For bone
type 34
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
20. 20.
STANDARD
Ø4.20mm
Standard Platform
Catalog No.
Dimensions
MF4-06420
Ø 4.20mm
length 6mm
M4 internal hex. implant
Ø 4.20mm
length 8mm
MF4-08420
MF4-10420
Sand Blasted and Acid-Etched
Ø 4.20mm
length 10mm
MF4-11420
Titanium Alloy Ti 6Al 4V ELI
Ø 4.20mm
length 11.50mm
2.45
Ø 4.20
Ø 3.75
0.4mm
Ø 4.20mm
length 13mm
MF4-13420
L
Ø 4.20mm
length 16mm
MF4-16420
Ø 3.65
Ø4.20mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø3.20
Ø4.20
Ø4.20
OR
For bone
type 12
MT-GDN33
Countersink
For bone
type 34
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
21. WIDE
Screw type implants range
Wide Platform
6mm
8mm
10mm
11.50mm
13mm
16mm
MF4-06500
Length
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
Surgical tools
Type
(For more information please refer to
page no. 45-46)
Ø5
mm
MT-HLI10
Long insertion tool,
int. hex. connection
MF4-06600
MF4-08600
MF4-10600
MF4-11600
MT-HSI10
MF4-13600
Short insertion tool,
int. hex. connection
Ø6
mm
MT-SRA10
Square connection to
ratchet adapter
MT-SHA10
Hand wrench
square connection
Implant cover screw
healing caps
Available for heights: 3,4,5mm
MC1-00470
Ø 5mm
3/4/5mm
MH-W3500
MH-W4500
MH-W5500
Ø 6.5mm
3/4/5mm
MH-W3630
MH-W4630
MH-W5630
22. 22.
WIDE
Catalog No.
MF4-06500
Ø5mm
Wide Platform
Dimensions
Ø 5mm
length 6mm
M4 internal hex. implant
Ø 5mm
length 8mm
MF4-08500
MF4-10500
Sand Blasted and Acid-Etched
Ø 5mm
length 10mm
MF4-11500
Titanium Alloy Ti 6Al 4V ELI
Ø 5mm
length 11.50mm
2.45
Ø5
Ø4.50
Ø 5mm
length 13mm
MF4-13500
0.4mm
L
Ø 5mm
length 16mm
MF4-16500
Ø4.35
Ø5mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
400600
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø4.50
Ø4.50
Ø5.00
Ø5
OR
For bone
type 12
MT-GDN50
Countersink
For bone
type 34
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
23. WIDE
Catalog No.
MF4-06600
Ø6mm
Wide Platform
Dimensions
Ø 6mm
length 6mm
M4 internal hex. implant
Ø 6mm
length 8mm
MF4-08600
MF4-10600
Ø 6mm
length 10mm
MF4-11600
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
Ø 6mm
length 11.50mm
2.45
Ø6
Ø4.50
Ø 6mm
length 13mm
MF4-13600
0.4mm
L
Ø 5.35
Ø6mm Implant Procedure
Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
400600
300500
300500
200500
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø4.50
Ø5
Ø5.50
Ø4.50
Ø6.00
OR
For bone
type 12
MT-GDN50
Countersink
For bone
type 34
15-25
Ø6
24. 24.
Implant Insertion Tools
2
1
3
Implant insertion tools are designed
to facilitate quick and reliable implant
placement procedures. The unique
3 in 1 key system, minimizes the number
of tools required and maximizes flexibility.
1 Insertion tool for hand key adapter
2 Insertion tool for motor
3 Insertion tool for ratchet adapter
Please note: In order to assure efficient operation, keys should be fully inserted
into the implants. Complete insertion of the key optimizes the transfer of force
during implant placement and enables simple release of the key from the hex.
at the end of the procedure.
Key will not hold the implant properly unless it is completely securely
inserted into the hex.
Implant insertion tools
The improved insertion tool
allows the delivery of a cover
screw or a healing cap onto the
implant after insertion.
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
25. Screw type implants range
One Piece
10mm
11.50mm
13mm
16mm
MO1-10300
MO1-11300
MO1-13300
MO1-16300
MO1-10350
Length
MO1-11350
MO1-13350
MO1-16350
Type
Ø 3
mm
Ø 3.50
mm
Surgical Tools
MT-HKS15
UNO One Piece implant short key
MT-HKL21
UNO One Piece implant long key
MT-HKO21
UNO One Piece implant insertion tool
26. 26.
Ø3mm
Catalog No.
One Piece
Dimensions
Ø 3mm
length 10mm
MO1-10300
UNO One Piece Implant
Ø 3mm
length 11.50mm
MO1-11300
MO1-13300
Thread section is Sand Blasted and
Acid-Etched
Ø 3mm
length 13mm
MO1-16300
Titanium Alloy Ti 6Al 4V ELI
Ø 3mm
length 16mm
6.3mm
2.7mm
Ø3
L
Ø3mm Implant Procedure
Drilling Speed
(RPM)
12001500
Diameter
Ø1.90
Ø2
15-25
700900
9001200
Ø2
Ø2.40
Ø2.4
Ø3
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
27. Ø3.50mm
Catalog No.
One Piece
Dimensions
Ø 3.50mm
length 10mm
MO1-10350
UNO One Piece Implant
Ø 3.50mm
length 11.50mm
MO1-11350
MO1-13350
Thread section is Sand Blasted and
Acid-Etched
Ø 3.50mm
length 13mm
MO1-16350
Titanium Alloy Ti 6Al 4V ELI
Ø 3.50mm
length 16mm
6.3mm
2.7mm
Ø 3.50
L
Ø3.50mm Implant Procedure
Drilling Speed
(RPM)
12001500
9001200
Diameter
Ø1.90
Ø2
700900
Ø2
500700
Ø2.40
Ø3
15-25
Ø3
Ø3.50
Procedures recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
28. 28.
UNO One Piece
Restorative Components
UNO restorative components include an analog and a multi-purpose plastic cap,
that may be used as an accurate impression coping, a temporary healing cap or
as a base for a temporary restoration.
Impression coping.
The impression coping combines
the benefits of closed and open
tray impression techniques,
resulting in accurate working
models and perfectly fitting
restorations.
Temporary restoration.
The impression coping can be
used as a base for a temporary
restoration by cutting off
the upper section and
roughening the surface.
The use of non-eugenol
temporary cement is
recommended.
Healing cap.
By cutting off the upper section,
the plastic cap becomes a
healing cap.
MM-OUP01
UNO One Piece implant
comfort plastic cap
MO1-RSA10
UNO One Piece
implant analog
29. Screw type range
Orthodontic
Anchor Screw
6mm
8mm
10mm
12mm
MG2-06160
Length
MG2-08160
MG2-10160
MG2-12160
Orthodontic Anchor Screw
Type
Titanium Alloy Ti 6Al 4V ELI
Ø .60
1
mm
2.5
2.75
Link Tools
Link tools are specially engineered to allow simple, smooth and quick insertion
or removal of Link orthodontic anchor screws. Insertion or removal may be
safely and effectively accomplished by hand.
MT-TDO01
Ortho anchor pilot drill 1mm
MT-SCD20
Short cross driver for orthodontic screws
MT-LCD20
Long cross driver for orthodontic screws
MT-MSD20
Surgical adapter driver
30. 30.
Packaging
The innovative MIS packaging system is designed for simple and easy use. All of
our implant boxes feature distinctive colors, large typeface, clear data labels and
a pull tab for quick opening. Boxes are a uniform shape and height, specifically
designed to fit in clinic cabinets for easy accessibility and compact space-saving
storage.
Boxes are a uniform
shape and height,
specifically designed to
fit in clinic cabinets for easy
accessibility and compact
space-saving storage.
Implant identification markings
Quick identification markings signify:
implant diameter (top), implant length
(middle) and implant platform (bottom).
Pull tab
Convenient pull tab facilitates
easy, quick opening of the box
during surgery.
31. Implant Label Colors
Light Gray Ø3 UNO One Piece
Gray Ø3.50 UNO One Piece
Yellow Ø3.30 Narrow (SEVEN, M4)
Red Ø3.75 Standard (SEVEN, M4)
Blue Ø4.20 Standard (SEVEN, M4)
Green Ø5 Wide (SEVEN, M4)
White Ø6 Wide (SEVEN, M4)
33. Surgical Instruments.
MIS offers a full range of surgical kits and instruments,
aiming to simplify surgical procedures to the benefit
of both patients and clinicians.
49. Torque Ratchet Kit
MT-RI050
The new premium Torque Wrench fits all MIS insertion tools and adapters. It is
designed for convenient grip, accurate torque transfer and simple assembly and
disassembly; to facilitate effortless cleaning and maintenance.
Ratchet mode option
Wide torque range
15 - 70 Ncm
Adjustment key
Lubricant tube
51. Kits.
MIS has dedicated years of collaboration with clinicians in order to develop
our state-of-the-art surgical kits. Engineered with the aim of streamlining
surgical procedures, MIS kits are designed to simplify standard procedures
and provide creative solutions for all your clinical needs.
52. 52.
SEVEN Advanced Surgical Kit
The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant
placement procedures. The kit is designed to enhance simplicity and safety;
featuring a novel ergonomic design that follows the surgical drilling sequence for
a more efficient procedure. A set of length-based pilot drills include color coded
visual indicators for both implant diameters and restorative platforms.
MK-EI48
Advanced Surgical Kit for the SEVEN implant
system with external irrigation drills
53. Kit Contents
Surgical kit for the SEVEN implant system with external irrigation drills
MK-EI48
Kit content:
Pcs:
Pcs:
Pcs:
Pcs:
1
1
1
1
MT-SMD10
MT-TDT32
Spade marking drill
Twist drill 3.2mm external irrigation
1
MT-TDN19
MT-GDN33
MT-TDT40
Marking drill 1.90mm
external irrigation
Long insertion tool,
int. hex. connection
Body try-in 5mm
1
1
MT-HLI10
MT-BTT50
1
MT-HSI10
Countersink for standard platform
Twist drill 4mm external irrigation
Short insertion tool,
int. hex. connection
1
1
1
MT-P2406
MT-GDN50
MT-TDT45
Pilot drill with built-in stopper
dia. 2.40 height 6mm
Countersink for wide platform
Twist drill 4.5mm external irrigation
1
MT-SHA10
1
1
1
Hand wrench square
connection
MT-NRH20
MT-P2408
Pilot drill with built-in stopper
dia. 2.40 height 8mm
Hex. ratchet long adapter for
int. hex. connection, NP
MT-TDT50
Twist drill 5mm external irrigation
1
MT-DE001
Drill extender
1
1
1
MT-P2410
MT-BTT24
Pilot drill with built-in stopper
dia. 2.40 height 10mm
MT-MRH20
Hex. ratchet long adapter for
int. hex. connection
Body try-in 2.4mm
1
MT-SM005
Short motor adapter
for 0.05 hex.
1
1
1
Long direct hand and
ratchet hex. key
Body try-in 2.8mm
Pilot drill with built-in stopper
dia. 2.40 height 11.5mm
Long motor adapter
for 0.05 hex.
Parallel pin dia. 2.40/3mm for
tapered impl. procedure
Body try-in 3.20mm
Pilot drill with built-in stopper
dia. 2.40 height 13mm
MT-LM005
MT-PP240
MT-BTT32
MT-P2413
1
1
1
1
MT-HMR10
MT-BTT28
MT-P2411
1
MT-RI030
Ratchet wrench
1
1
1
MT-BTT40
MT-P2416
Implant direction indicator
1
1
1
MT-DI001
Body try-in 4mm
Pilot drill with built-in stopper
dia. 2.40 height 16mm
MT-TDT28
MT-BTT45
Twist drill 2.8mm external irrigation
Body try-in 4.50mm
MT-SRA10
Square connection
to ratchet adapter
54. 54.
M4 Advanced Surgical Kit
MIS M4 implants combine the benefits of cylindrical and conical implant designs,
with the aim of achieving excellent primary stability for every clinical scenario. Two
main features of M4 implants include the self-tapping, V-shaped thread design
with three spiral channels – allowing for smooth insertion even in type 1 bone
conditions, and a flat, cutting, tapered apex – enabling instantaneous grip into
bone for immediate placement procedures.
MK-0016
M4 Advanced Surgical Kit
55. Kit Contents
M4 Advanced Surgical Kit
Kit Contents:
Pcs:
Pcs:
Pcs:
1
1
1
MT-SMD10
MT-DE001
Spade marking drill
MT-MRH25
Drill extender
Hex. ratchet long adapter
for int. hex. connection
1
1
MT-TDN19
MT-SRA10
1
Square connection to
ratchet adapter
Marking drill 1.90mm
external irrigation
MT-SHA10
Hand wrench square
connection
1
1
MT-SM005
MT-P2416
Pilot drill with built-in stopper
dia. 2.40 height 16mm
Short motor adapter for 0.05 hex.
MT-RI030
1
MT-LM005
1
Long motor adapter for 0.05 hex.
MT-TDN28
Twist drill 2.8mm external irrigation
1
MT-HSI10
Short insertion tool,
int. hex. connection
1
MT-TDN32
Twist drill 3.2mm external irrigation
1
MT-HLI10
Long insertion tool,
int. hex. connection
1
MT-TDN38
Twist drill 3.8mm external irrigation
1
MT-CSN33
Countersink for narrow platform
1
MT-TDN45
1
Twist drill 4.5mm external irrigation
MT-GDN33
Countersink for standard platform
1
1
MT-TDN50
MT-GDN50
Twist drill 5mm external irrigation
Countersink for wide platform
1
1
MT-TDN55
Twist drill 5.5mm external irrigation
1
MT-PP240
Parallel pin dia. 2.40/3mm for
tapered impl. procedure
Ratchet wrench
MK-0016
56. 56.
M4 Drilling Set
MK-0014
In order to Make It Simple, the innovative M4 implants Drilling Set was designed as
an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor
has a full range of drills and tools necessary to complete both M4 and SEVEN
implant placement procedures.
MK-0014
M4 Drilling Set
Kit Contents:
MT-CSN33
MT-TDN28
MT-TDN45
Twist drill 2.8mm external irrigation
Twist drill 4.5mm external irrigation
Countersink for narrow platform
MT-TDN32
MT-TDN50
MT-GDN33
Twist drill 3.2mm external irrigation
Twist drill 5mm external irrigation
Countersink for standard platform
MT-TDN38
MT-TDN55
MT-GDN50
Twist drill 3.8mm external irrigation
Twist drill 5.5mm external irrigation
Countersink for wide platform
57. Yeung Bone Harvest Kit
MK-BH26
The Bone Harvest Kit enables, simple and easy bone harvesting during surgery.
It provides a revolutionary dual-action bone harvesting system while drilling; the
harvested bone can be used elsewhere as needed. the drills can also be used
as final drills.
Drill
Color-coded drill
matches sleeve color.
Simple.
The bone accumulates inside the
drill slots during drilling.
Easy.
The Bone Harvest drills can be used
as final drills while harvesting bone.
Kit Contents
The Bone Harvest Kit includes:
Recommended speed is between 20-50 RPM without irrigation.
Drill with a slight continuous pressure. While removing the drill, continue rotation to keep
the bone inside the drill slots. Drills should not be used more than 30 times.
Ø2.80mm
MT-BC320
Ø3.20mm
MT-BC380
Ø3.80mm
MT-BC450
Safe.
The Bone Harvest Kit can be used
with MIS drill stoppers, to assure a
safe drilling procedure.
MT-BC280
Ø4.50mm
58. 58.
SEVEN Standard Platform Stoppers Kit
MK-BS001
Following the use of MIS length-based pilot drills, the SEVEN Standard Platform
Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most
commonly used lengths: 8, 10, 11.5 and 13mm.
Stoppers
Four sleeves for each diameter
in 8, 10, 11.5 and 13mm lengths,
color-coded according to drills
Box
Tray can be removed from
the box for ease of use
Scale
Teflon IN Insert
Teflon OUT Insert
Simple.
Quick, easy assembly
Easy.
Color-coding for quick identification of
the sleeve diameter
Safe.
Safe drilling to desired depth
Clear.
Clearly arranged depth sleeves for 8 to13mm
for two diameters: Ø2.8 and Ø3.2mm
Kit Contents
Ø2.80 stoppers
(for Ø3.75mm implants)
Ø3.20 stoppers
(for Ø4.20mm implants)
59. SEVEN Drill Stoppers Kits - Depth-Based
MK-SDS**
Following the use of the MIS length-based pilot drills, the SEVEN Drill Stoppers
Length Kits enable safe and easy drilling to the exact desired depth. 5 different
Stoppers Kits are available in lengths: 6, 8, 10, 11.5 and 13mm.
Stoppers
Five sleeves 2.8, 3.2, 4, 4.5 and
5mm diameters, color-coded
according to drills
Box
Tray can be removed from
the box for ease of use
13mm
11.5mm
10mm
8mm
Desired
drilling depth
Scale
Teflon IN Insert
Teflon OUT Insert
Simple.
Quick, easy assembly
Kit Contents
For 6mm implants
MK-SDS06
Easy.
Color-coding for a quick identification
of sleeve diameter
Safe.
Safe drilling to desired depth
Clear.
Clearly arranged depth sleeves for
Ø2.8mm to Ø5mm diameter drills
For 10mm implants
MK-SDS10
For 11.5mm implants
MK-SDS11
For 8mm implants
MK-SDS08
For 13mm implants
MK-SDS13
60. 60.
Abrahami Drill Guide Kit
MK-0011
The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to
accurately locate and drill the osteotomies of two or more consecutive implants
with optimal spacing, angulation and parallelism. In standard cases, the Abrahami
Kit may be used as a simple alternative to a surgical guide. Although designed as
a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.
MK-0011
Abrahami Drill Guide Kit
61. Simple and logical
Stabilization
Optimal parallelism
Ideal distance measurement
from adjacent teeth
Variable distance
options
Location Pins Ø2mm
Short 10mm
Long 16mm
Location Pins Ø2.80mm
Screw
Short 10mm
Long 16mm
Spring
Extension Arms
Ball
6, 7, 8mm
9, 10, 11mm
Location pin
12, 13, 14mm
Paralleling Pin 20mm
Before cleaning, the Location Pins must be separated
as follows: screws, springs, balls and pins. Cleaning and
drying the parts is essential in order to avoid erosion of the
parts and to maintain efficient functioning of the system.
62. 62.
Bone Compression Kit
MK-0020
The MIS Bone Compression Kit is designed to enhance primary stability and increase
immediate bone-to-implant contact in mainly type 3 and type 4 bone conditions.
MK-0020
Bone Compression Kit
kit is not designed for ridge widening.
64. 64.
UNO Implant Surgical Kit
UNO One Piece implants are placed using specially
designed tools that fit the implant prosthetic part. The kit
includes surgical drills, placement keys and a ratchet wrench.
MK-0036
UNO Implant Surgical Kit
65. Kit Contents
UNO Implant Surgical Kit
Kit Contents:
Pcs:
Pcs:
Pcs:
1
1
1
MT-SMD10
MT-UML21
Spade marking drill
UNO One Piece implant
motor adapter, long
1
MT-TDN20
MT-HKO21
UNO One Piece implant
insertion tool
1
MT-PP001
Pilot drill 2mm
external irrigation
Parallel pin
1
MT-RI030
1
MT-P2416
Pilot drill with built-in stopper
dia. 2.40 height 16mm
1
MT-TDT30
Twist drill 3mm
external irrigation
1
MT-BTT20
Body try-in 2.0mm
1
MT-BTT24
Body try-in 2.4mm
1
MT-BTT30
Body try-in 3.0mm
Ratchet wrench
1
MT-HKL21
UNO One Piece
implant long key
MK-0036
66. 66.
Prosthetic Tools Kit
MK-0039
The MIS Prosthetic Tools Kit consists of tools required for standard restorative
procedures. The kit includes a torque wrench, a locator placing tool and MIS hex.
drivers and implant indicators. In addition, the kit includes an abutment holder system for
improved handling and easier abutment adjustments.
MK-0039
Prosthetic Tools Kit
67. Kit Contents
Kit Contents:
Pcs:
Pcs:
Pcs:
1
1
1
MM-LSD15
MT-HDS30
Locator torque wrench
driver short
MT-HDL30
MM-LSD21
MT-DI001
MT-BK235
1
1
MT-IE172
Internal connection
abutment extractor
MT-SMK13
MT-MUK02
Short motor key
adapter 0.05
Multi-Unit key
1
MT-IT100
1
1
MT-HHR07
Short hand screwdriver
for 0.05 hex.
1
MT-HHR13
Long hand screwdriver
for 0.05 hex.
MT-LMK13
Long motor key
adapter 0.05
Locator core tool
Wide int. hex. Implant analog
for universal hand driver
1
1
MM-LCT10
MT-UW002
implant direction
Indicator
Ball attachment
anchor key
Torque wrench
1
1
4
1
MT-RI040
Standard Int. hex. Implant
analog for universal hand driver
Long hex. drive 0.05
Locator torque wrench
driver long
1
MT-US002
Short hex. drive 0.05
1
1
Pcs:
Closed tray impression
coping key
MT-MSD20
Surgical adapter driver
68. 68.
Sinus Lift Osteotomes Set
MK-0023
The MIS Sinus Lift Osteotomes Set is used for closed sinus
augmentation procedures. The set includes four straight and
four bayonet concave tools. All tools are laser marked for
depths of 6, 11 and 15mm, and are equipped with stoppers
for convenience and safety.
Concave
6mm
11mm
15mm
MK-0023
Sinus Lift Osteotomes Set
69. Convex Osteotomes Set
MK-0024
The MIS Convex Osteotomes Set is used for closed sinus
augmentation procedures. The set includes four straight and four
bayonet convex tools. All tools are laser marked for depths of 6,
11 and 15mm, and are equipped with stoppers for convenience
and safety.
Convex
6mm
11mm
15mm
MK-0024
Convex Osteotomes Set
70. 70.
MIS offers a comprehensive line of kits for every clinical scenario and matched
to every MIS implant system and procedure. The kits are expertly designed to
enhance convenience, safety and simplicity.
SURGERY
KITS
M4
SEVEN
13
9
7
Bone Compression Kit
Abrahami Drill Guide Kit
Zircon Diamond Burr Set
14
8
7
5
5
UNO Surgical Kit
10
PROSTHETIC
KITS
5
PROSTHETIC
COMPONENT
MGUIDE Surgical Kit
Prosthetic Kit
CPK
2
4
6
9
TI-BASE Kits
6
6
4
72. 72.
Prosthetic Options.
MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments
are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions
for both screw retained and cement retained restorations. The MIS temporary plastic abutments are made of
PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength
and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up
to 6 months. In an effort to continuously develop our range of superstructures, MIS offers new Titanium
Base abutments, compatible with most CAD/CAM systems software. The new abutments meet the specific
requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options,
the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and
aesthetic implant supported restorations.
73. 1
5
MN-RSM10
MN-IT300
NARROW
2
6
MN-IT100
Analog and Impression Copings
1.5:1
1.5:1
MN-I0330
1
MN-RSM10
5
Implant analog
internal hex. NP
1.5:1
3
7
MN-G0160
Direct impression coping
Set for closed tray NP
Material: Stainless steel
Dimensions: Length - 12mm
1.5:1
MN-GP100
2
MN-IT100
Material: Titanium
Dimensions: Height - 7.8mm
6
Direct impression coping
for closed tray NP
4
3
MN-GP100
Direct impression coping
guide pin Internal hex. NP
MN-PF330
1.5:1
Material: Titanium
Dimensions: Length - 16.5mm
4
MN-PF330
Direct press fit for
closed tray NP
1.5:1
MN-IT300
Direct impression coping set
for closed tray, NP
Material: Titanium
Dimensions: Length - 11mm
MN-I0330
Direct impression coping
for open tray Internal hex. NP
Material: Stainless steel
Dimensions: Height - 9mm
1.5:1
MN-IT300
Material: Stainless steel
Dimensions: Height - 11mm
7
MN-G0160
Direct impression coping
guide pin internal hex.
Material: Titanium
Dimensions: Length - 21mm
78. 78.
1
MN-S0160
2
3
MN-TB001
MN-RSM10
NARROW
CAD/CAM
Ti Base Kit - Single
Tooth Restoration
5
4
Hexagon Connection
(with anti-rotation mechanism)
GI-SCH11
1
MN-S0160
2
MN-TB001
3
MN-RSM10
4
GI-SCH11
Direct prosthetic screw internal
hex. Narrow platform
Ti Base internal hex. connection
for CAD/CAM, Narrow platform
Implant analog internal hex.
Narrow platform
Burnout anti-rotation plastic cap for
Ti Base, Standard platform
Hex.
MK-TBN4
Ti Base kit h. 4mm for
internal hex. connection, NP
For
Laboratory
Use Only!
Scan
abutment
MN-SP001
Scanning abutment internal hex.
connection, Narrow platform
MN-S0160
MK-TBN4
Direct prosthetic screw internal hex.
Narrow platform
79. 1
MN-S0160
2
MN-TB002
3
MN-RSM10
NARROW
CAD/CAM
Ti Base Kit Multi-Unit Restoration
Non-Hexagon Connection
4
MK-MUN4
(without anti-rotational mechanism)
GI-SCH11
1
MN-S0160
2
MN-TB002
3
MN-RSM10
4
GI-SCH11
Direct prosthetic screw
internal hex. Narrow platform
Multi Unit Ti-Base internal hex.
connection, Narrow platform
Implant analog internal hex.
Narrow platform
Burnout anti-rotation plastic cap for
Ti-Base, Standard platform
Non-Hex.
MK-MUN4
Multi Unit Ti Base kit h. 4mm
internal hex. connection, NP
For
Laboratory
Use Only!
Scan
abutment
MN-SP001
Scanning abutment internal hex.
connection, Narrow platform
MN-S0160
Direct prosthetic screw internal hex.
Narrow platform
80. 80.80.
NARROW
OT Equator kit
Kits
Laboratory Use:
Metal housing
OT Equator laboratory cap (black)
}
H=1,2,3,4,5mm
Clinical Use:
Metal housing
Kit Options:
MK-NOE1
OT Equator internal hex. kit,
gingival height 1mm, NP
MK-NOE2
OT Equator internal hex. kit,
gingival height 2mm, NP
MK-NOE3
OT Equator Internal hex. kit,
gingival height 3mm, NP
MK-NOE4
OT Equator internal hex. kit,
gingival height 4mm, NP
MK-NOE5
OT Equator internal hex. kit,
gingival height 5mm, NP
Extra soft retention (yellow)
OT Equator cap (0.6kg)
OE-RCY01
Soft retention (pink)
OT Equator cap (1.2kg)
OE-RCP01
Standard retention (white)
OT Equator cap (1.8kg)
OE-RCW01
High retention (violet)
OT Equator cap (2.7kg)
OE-RCV01
2.6mm
1.7mm
OT Equator retention caps may
be purchased separately.
Equator
Ball Attachment
81. OT Equator Tools
MT-LM005
Long motor adapter for 0.05 hex.
MT-SM005
Short motor adapter for 0.05 hex.
OT Equator Abutments
Ø2.5mm
Ø2.5mm
1.7mm
1.7mm
2mm
1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Ø2.5mm
Ø2.5mm
1.7mm
1.7mm
OE-RSM60
3mm
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.7mm
5mm
ET-IT001
OT Equator handling tools
4mm
94. 94.
1
MD-S0220
2
MD-TB001
3
MD-RSM10
STANDARD
CAD/CAM
Ti Base Kit - Single
Tooth Restoration
5
4
Hexagon Connection
(with anti-rotational mechanism)
GI-SCH11
1
MD-S0220
2
MD-TB001
3
MD-RSM10
4
GI-SCH11
Direct prosthetic screw
internal hex.
Ti Base Internal hex. connection
for CAD/CAM, Standard platform
Implant analog Internal hex.
Standard platform
Burnout anti-rotation plastic cap for
Ti Base, Standard platform
Hex.
MK-TBS4
Ti base Kit h. 4mm for
internal hex. connection, SP
For
Laboratory
Use Only!
Scan
abutment
MD-SP001
Scanning abutment
internal hex. connection,
Standard platform
MD-S0220
Direct prosthetic screw
internal hex.
MK-TBS4
95. 1
2
MD-S0220
MD-TB002
3
MD-RSM10
STANDARD
CAD/CAM
Ti Base Kit Multi Unit Restoration
5
4
Non-Hexagon Connection
(without anti-rotational mechanism)
GI-SCH11
1
MD-S0220
2
MD-TB002
3
MD-RSM10
4
GI-SCH11
Direct prosthetic screw
internal hex.
Multi Unit Ti Base Internal hex.
connection, Standard platform
Implant analog Internal hex.
Standard platform
Burnout anti-rotation plastic cap for
Ti Base, Standard platform
Non-Hex.
MK-MUS4
Multi Unit Ti Base Kit h. 4mm
internal hex. connection, SP
For
Laboratory
Use Only!
Scan
abutment
MD-SP001
Scanning abutment
internal hex. connection,
Standard platform
MD-S0220
Direct prosthetic screw
internal hex.
MK-MUS4
96. 96.96.
STANDARD
OT Equator kit
Kits
Laboratory Use:
Metal housing
OT Equator laboratory cap (black)
H=1,2,3,4,5mm
Clinical Use:
Metal housing
}
Options:
MK-SOE1
OT Equator internal hex. kit,
gingival height 1mm, SP
MK-SOE2
OT Equator internal hex. kit,
gingival height 2mm, SP
MK-SOE3
OT Equator internal hex. kit,
gingival height 3mm, SP
MK-SOE4
OT Equator internal hex. kit,
gingival height 4mm, SP
MK-SOE5
OT Equator internal hex. kit,
gingival height 5mm, SP
Extra soft retention (yellow)
OT Equator cap (0.6kg)
OE-RCY01
Soft retention (pink)
OT Equator cap (1.2kg)
OE-RCP01
Standard retention (white)
OT Equator cap (1.8kg)
OE-RCW01
High retention (violet)
OT Equator cap (2.7kg)
OE-RCV01
2.6mm
1.7mm
OT Equator retention caps may
be purchased separately.
Equator
Ball Attachment
97. OT Equator Tools
MT-LM005
Long motor adapter for 0.05 hex.
OT Equator Abutments
Ø2.5mm
MT-SM005
Short motor adapter for 0.05 hex.
Ø2.5mm
1.7mm
1.7mm
2mm
1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Ø2.5mm
Ø2.5mm
1.7mm
1.7mm
4mm
OE-RSM60
3mm
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.7mm
5mm
ET-IT001
OT Equator handling tools
104. 104.
17°
30°
15°
1.2mm
15°
Multi-Unit Angulated
2.6mm
1.2mm
3.2mm
1.3mm
1mm
MA-ANH17
MA-ANH30
Solutions for extreme situations
64°
^
^
30°
^
^
Straight Multi-Unit abutments
can be used with implants
with divergence of up to 30º.
17º Multi-Unit abutments can
be used with implants with
divergence of up to 64º.
Clinical summary
Place Multi Unit angulated abutment (17°/30°) on the
implant with the assistance of the gripping bar. To screw
the abutment to the implant, position the Multi-Unit key (MTMUK02) through the gripping bar’s opening. Recommended
tightening moment is 30 Ncm.
^
^
90°
30º multi unit abutments can
be used with implants with
divergence of up to 90º.
106. 106.
1
1
7
MB-SF200
MT-TSD10
STANDARD
MB-PPR10
1.5:1
2
2
MB-GPS10
2:1
Angulated Ball Attachments
MB-DB235
1.5:1
3
1:2
MB-TTP10
1:1
3
MB-PPC10
4
MB-DMH10
MB-PR010
4
8
MB-TTP10
1.5:1
1
MB-TBS10
5
MB-PR010
2:1
6
9
MB-TBS20
2
10
Screw driver for titanium
ball cap
Material: Stainless steel
Dimensions: Length - 60mm
MB-GPS10
8
MB-DMH10
Double metal housing
Gold ball cap
MB-PPR10
3:1
1.5:1
MT-TSD10
MB-PPC10
2:1
1.5:1
7
Material: Plastic
Dimensions: Length - 3.5mm
1:1
1.5:1
5
MB-SF200
Plastic ball cap
2:1
Material: Gold-e
Dimensions: Length - 2.4mm
2:1
11
3
MB-DB235
MB-TTP10
9
MB-PPC10
Titanium ball cap
Standard plastic cap for
metal housing
Material: Titanium
Dimensions: Length - 3.1mm
Material: Plastic
Dimensions: Length - 2.6mm
Retention 1200-1300g
1:1
4
MB-PR010
10
MB-PPR10
Plastic mounting sleeve
Material: Plastic
Dimensions: Length - 2mm
Diameter - 3.8mm
5
Soft plastic cap for
metal housing
Material: Plastic
Dimensions: Length - 2.6mm
Retention 800-950g
MB-TBS10
Titanium ball cap
spring standard
Material: Steel
Dimensions: Diameter - 2.50mm
6
11
MB-DB235
Plastic disc for
ball attachment
Material: Plastic
Dimensions: Diameter - 15mm
MB-TBS20
Titanium ball cap
spring soft
Material: Steel
Dimensions: Diameter - 2.60mm
MB-DB235
Plastic disc for
ball attachment
107. Angulated Ball
Attachments
15°
Ø4
Ø4.6
Ball Ø2.25
25°
3mm
3.5mm
1.7mm
1.7mm
MB-AN152
MB-AN252
50°
^
^
^
^
Place the ball anchor angulated abutment (15°/25°) on the
implant by the gripping bar. To screw the abutment to the implant,
position the hand hex. driver (MT-HHR13) through the gripping
bar opening. Recommended tightening moment is 30 Ncm.
^
Clinical summary
25° 25°
^
^
^
15º ball attachments can
be used with implants with
divergence of up to 30º.
^
^
15° 15°
^
30°
^
Solutions for extreme situations
.6
Ball Ø2.25
25º ball attachments can
be used with implants with
divergence of up to 50º.
108. 108.
1
8
MB-SZL00
MM-LCT10
STANDARD
1:1
2
Locator Attachment System
MB-SZL01
1:1
3
MB-SZL02
1:1.5
9
MM-LMP02
1
1:1
4
MB-SZL03
10
2
MB-SZL01
Material: Steel
Titanium Nitride coated Ti
9
Locator abutment 1mm
hgt., Standard platform
MM-LFA40
6
MB-SZL05
1:1.5
3
MB-SZL02
Material: Steel/ Nylon
Dimensions: Length - 1.80mm
Titanium Nitride coated Ti
10
Locator abutment 2mm
hgt., Standard platform
Material: Aluminum polyethylene
Dimensions: Length - 4.50mm
Diameter - 4.70mm
Material: Titanium Nitride coated Ti
Dimensions: Height - 2mm
MB-SZL06
4
MB-SZL03
Locator abutment 3mm
hgt., Standard platform
Material: Titanium Nitride coated Ti
Dimensions: Height - 3mm
1:1
5
MM-LIC10
Locator impression coping
(4 Pack)
1:1
7
MM-LMP02
Locator male processing
package (2 Pack)
Material: Titanium Nitride coated Ti
Dimensions: Height - 1mm
1:1
MM-LCT10
Locator core tool
Material: Titanium Nitride coated Ti
Dimensions: Height - 0mm
1:1.5
11
MB-SZL04
8
MM-LIC10
1:1
5
MB-SZL00
Locator abutment 0mm
hgt., standard platform
1:1.5
11
MM-LFA40
Locator female analog
4mm dia. (4 Pack)
Material: Aluminum polyethylene
Dimensions: Length - 10.40mm
Diameter - 4mm
MB-SZL04
Locator abutment 4mm
hgt., Standard platform
Material: Titanium Nitride coated Ti
Dimensions: Height - 4mm
6
MB-SZL05
Locator abutment 5mm
hgt., Standard platform
Material: Titanium Nitride coated Ti
Dimensions: Height - 5mm
7
1.78mm
Gingival height 0-6mm
MB-SZL06
Locator abutment 6mm
hgt., Standard platform
Material: Titanium Nitride coated Ti
Dimensions: Height - 6mm
*Note: Locator selection
should be based on
gingival height
MB-SZL03
3mm Locator Standard abutment
Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
109. 1
6
MM-LRM10
MM-LPP10
STANDARD
1:1
2
7
MM-LLR10
2
1:1
8
Locator Attachment System
MM-LBP10
MM-LSD15
MM-LRM10
1:1
1:1
3
MM-LEL10
3
1:1
MM-LLR10
1
1:1
4
MM-LER10
4
1:1
MM-LEL10
5
MM-LELE1
5
9
MM-LSD21
2
1:1
MM-LER10
MM-LLR10
Material: Polyethylene black
Dimensions: Length - 15mm
Diameter - 4.60mm
7
Material: Nylon pink
Dimensions: Length - 1.80mm
Diameter - 4.70mm
3
MM-LELE1
MM-LEL10
MM-LBP10
Locator black processing
replacement male (4 Pack)
(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg
1:1
MM-LPP10
Locator parallel post (4 Pack)
Locator light retention
1:1
6
6
Material: Nylon
Material: Aluminum
Dimensions: Length - 1.80mm
Dimensions: Length - 10.40mm
Diameter - 4.70mm
Diameter - 4mm
1.5:1
1:1
MM-LRM10
MM-LFA40
Locator female analog 4mm
Locator replacement male clear
(4 Pack) Pack) 5 lbs**, 2.27 kg
dia. (4 0°-10°*,
Material: Polyethylene black
Dimensions: Length - 1.80mm
Diameter - 4.60mm
8
MM-LSD15
Locator extra light retention
Locator torque wrench
driver short
Material: Nylon blue
Dimensions: Length - 1.80mm
Diameter - 4.70mm
Material: Stainless steel
Dimensions: Length - 15mm
(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg
1.5:1
1:1
4
MM-LER10
9
MM-LSD21
Locator extended range (4 Pack)
Locator torque wrench
driver long
Material: Nylon green
Dimensions: Length - 1.80mm
Diameter - 4.70mm
Material: Stainless steel
Dimensions: Length - 21mm
10°-20°*, 3-4 lbs**, 1.36-1.82 kg
5
MM-LELE1
Locator extra-light extended
(4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
Material: Nylon red
Dimensions: Length - 1.80mm
Diameter - 4.70mm
* For the correction of the axes divergences for one implant
** Retention strength
118. 118.
1
MD-S0220
2
MW-TB001
3
MW-RSM10
WIDE
CAD/CAM
Ti Base Kit - Single
Tooth Restoration
5
4
Hexagon Connection MK-TBW4
(with anti-rotational mechanism)
GI-WCH11
1
MD-S0220
2
MW-TB001
3
MW-RSM10
4
GI-WCH11
Direct prosthetic screw
internal hex.
Ti Base internal hex. connection
for CAD/CAM, Wide platform
Implant analog internal hex.
Wide platform
Burnout anti-rotation plastic cap for
Ti Base, Wide platform
Hex.
MK-TBW4
Ti Base Kit h. 4mm for
internal hex. connection, WP
For
Laboratory
Use Only!
Scan
abutment
MW-SP001
Scanning abutment
internal hex. connection,
Wide platform
MD-S0220
Direct prosthetic screw
internal hex.
119. 1
2
MD-S0220
MW-TB002
3
MW-RSM10
WIDE
CAD/CAM
Ti Base Kit Multi-Unit Restoration
5
4
Non Hexagon Connection MK-MUW4
(without anti-rotational mechanism)
GI-WCH11
1
MD-S0220
2
MW-TB002
3
MW-RSM10
4
GI-WCH11
Direct prosthetic screw
internal hex.
Multi-Unit Ti Base internal hex.
connection, Wide platform
Implant analog internal hex.
Wide platform
Burnout anti-rotation plastic cap for
Ti Base, Wide platform
Non-Hex.
MK-MUW4
Multi-Unit Ti Base kit h. 4mm
internal hex. connection, WP
For
Laboratory
Use Only!
Scan
abutment
MW-SP001
Scanning abutment
internal hex. connection,
Wide platform
MD-S0220
Direct prosthetic screw
internal hex.
120. 120.
120.
WIDE
OT Equator kit
Kits
Laboratory Use:
Metal housing
H=1,3,5mm
OT Equator laboratory cap (black)
}
Options:
MK-WOE1
OT Equator internal hex. kit,
gingival height 1mm, WP
MK-WOE3
OT Equator internal hex. kit,
gingival height 3mm, WP
MK-WOE5
OT Equator internal hex. kit,
gingival height 5mm, WP
Clinical Use:
Metal housing
Extra soft retention (yellow)
OT Equator cap (0.6kg)
OE-RCY01
Soft retention (pink)
OT Equator cap (1.2kg)
OE-RCP01
Standard retention (white)
OT Equator cap (1.8kg)
OE-RCW01
High retention (violet)
OT Equator cap (2.7kg)
OE-RCV01
2.6mm
1.9mm
OT Equator retention caps may
be purchased separately.
Equator
Ball Attachment
121. OT Equator Tools
MT-LM005
Long motor adapter for 0.05 hex.
MT-SM005
OT Equator Abutments
Ø2.5mm
Short motor adapter for 0.05 hex.
1.9mm
1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Ø2.5mm
1.9mm
3mm
OE-RSM60
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.9mm
5mm
ET-IT001
OT Equator handling tools