The document summarizes updates from the MIPI Alliance Automotive Work Group regarding the development of automotive interface standards. It discusses major changes in the automotive industry driving new sensor and display requirements, as well as the need for high-speed interfaces to support advanced driver assistance systems and autonomous vehicles. The MIPI Alliance is working to develop an Automotive PHY specification and adapt existing MIPI protocols to meet automotive reliability, safety, and data rate demands.
MIPI DevCon Seoul 2018: High-Performance VR Applications Drive High-Resolutio...MIPI Alliance
This presentation by Miguel Rodriguez discusses Analogix's DisplayPort to MIPI DSI℠ controller for VR HMDs, which powers today’s tethered VR headsets in various configurations with distinct benefits and performance levels.
Alain Legault, VP IP Products at Hardent, discusses how the combination of VDC-M and MIPI DSI-2℠ can support the development of sophisticated mobile, AR/VR and automotive displays, provides an overview of the VDC-M algorithm and use cases.
MIPI DevCon Seoul 2018: Dual Mode C-PHY/D-PHY Use in VR Display IC MIPI Alliance
This co-presentation from Ahmed Ella of Mixel, Inc., and Jeffrey Lukanc of Synaptics, will cover Synaptics VXR7200 DisplayPort to Dual MIPI VR Bridge IC, integrating a Mixel C-PHY℠/D-PHY℠ Combo IP and controller.
James Goel, MIPI Technical Steering Group chair, shares a state-of-the-art MASS (MIPI Automotive SerDes Solutions) display architecture that leverages the latest MIPI DSI-2℠ protocols using VDC-M visually lossless compression algorithms to optimize pixel bandwidth within tightly constrained display systems.
MIPI DevCon Seoul 2018: MIPI – Making the 5G Vision a RealityMIPI Alliance
Kenneth Ma of Huawei/HiSilicon and chair of MIPI's Technical Steering Group, and Kevin Yee of Cadence Design Systems, Inc. and chair of MIPI's Marketing Steering Group team up to discuss the implications of 5G mobile and beyond-mobile technologies and use cases.
MIPI DevCon Seoul 2018: Powering AI and Automotive Applications with the MIPI...MIPI Alliance
Hyoung-Bae Choi of Synopsys, Inc. discusses use cases and the implementation of MIPI's camera interface in automotive and AI applications, along with the benefits of MIPI I3C℠ in the MIPI camera solution.
MIPI DevCon Seoul 2018: Mobile Technologies for a Smart World MIPI Alliance
In the MIPI DevCon Seoul keynote address, Jongshin Shin, vice president at Samsung Electronics Co., focuses on technologies such as 5G, ADAS and IoT, with MIPI solutions.
MIPI DevCon Seoul 2018: High-Performance VR Applications Drive High-Resolutio...MIPI Alliance
This presentation by Miguel Rodriguez discusses Analogix's DisplayPort to MIPI DSI℠ controller for VR HMDs, which powers today’s tethered VR headsets in various configurations with distinct benefits and performance levels.
Alain Legault, VP IP Products at Hardent, discusses how the combination of VDC-M and MIPI DSI-2℠ can support the development of sophisticated mobile, AR/VR and automotive displays, provides an overview of the VDC-M algorithm and use cases.
MIPI DevCon Seoul 2018: Dual Mode C-PHY/D-PHY Use in VR Display IC MIPI Alliance
This co-presentation from Ahmed Ella of Mixel, Inc., and Jeffrey Lukanc of Synaptics, will cover Synaptics VXR7200 DisplayPort to Dual MIPI VR Bridge IC, integrating a Mixel C-PHY℠/D-PHY℠ Combo IP and controller.
James Goel, MIPI Technical Steering Group chair, shares a state-of-the-art MASS (MIPI Automotive SerDes Solutions) display architecture that leverages the latest MIPI DSI-2℠ protocols using VDC-M visually lossless compression algorithms to optimize pixel bandwidth within tightly constrained display systems.
MIPI DevCon Seoul 2018: MIPI – Making the 5G Vision a RealityMIPI Alliance
Kenneth Ma of Huawei/HiSilicon and chair of MIPI's Technical Steering Group, and Kevin Yee of Cadence Design Systems, Inc. and chair of MIPI's Marketing Steering Group team up to discuss the implications of 5G mobile and beyond-mobile technologies and use cases.
MIPI DevCon Seoul 2018: Powering AI and Automotive Applications with the MIPI...MIPI Alliance
Hyoung-Bae Choi of Synopsys, Inc. discusses use cases and the implementation of MIPI's camera interface in automotive and AI applications, along with the benefits of MIPI I3C℠ in the MIPI camera solution.
MIPI DevCon Seoul 2018: Mobile Technologies for a Smart World MIPI Alliance
In the MIPI DevCon Seoul keynote address, Jongshin Shin, vice president at Samsung Electronics Co., focuses on technologies such as 5G, ADAS and IoT, with MIPI solutions.
MIPI DevCon Seoul 2018: Next Generation Verification Process for Automotive a...MIPI Alliance
With MIPI CSI-2℠ integrated in many complex systems, this presentation from Thierry Berdah and Yafit Snir, both of Cadence Design Systems, Inc., focuses on methodology for a full verification flow, from the IP level to the SOC level.
MIPI DevCon Taipei 2019: Enabling MIPI Camera Applications Including Automoti...MIPI Alliance
Kelvin Xu, product marketing manager at Synopsys, describes automotive ADAS designs with MIPI camera interface solutions such as CSI-2℠ and D-PHY℠, and outlines other MIPI automotive protocols, including I3C® and DSI℠.
MIPI DevCon 2020 | MIPI A-PHY: Laying the Groundwork for MIPI’s Automotive Se...MIPI Alliance
MIPI board member Ariel Lasry and A-PHY subgroup vice lead Edo Cohen share technical details of MIPI A-PHY, the cornerstone of MIPI Automotive SerDes Solutions (MASS).
MIPI DevCon 2020 | Interoperability Challenges and Solutions for MIPI I3CMIPI Alliance
This presentation from Geoffrey Duerden of Introspect Technology features a case study of several specific interoperability challenges and solutions in terms of circuit and layout guidelines, protocol implementations and target applications.
MIPI DevCon Seoul 2018: Integrating Image, Radar, IR and TOF Sensors: Develop...MIPI Alliance
In this presentation, Tom Watzka of Lattice Semiconductor Corp. provides an overview of the architectures and tradeoffs in mission-critical vision applications and the details of combining and tagging multiple data streams, including Camera Control Interface (CCI) integration.
MIPI DevCon Taipei 2019: PHY Testing Challenges and Opportunities: The Need F...MIPI Alliance
Victor Sanchez-Rico, project manager MIPI at BitifEye Digital Test Solutions GmbH, highlights the challenges observed and the lessons learned from BitifEye's experience with testing of high-speed digital interconnect busses, with a focus on the complex high-speed electrical PHY layer receiver conformance tests.
MIPI DevCon 2021: The MIPI Specification Roadmap: Driving Advancements in Mob...MIPI Alliance
Presented by James Goel, MIPI Technical Steering Group Chair
Despite the many challenges over the past year, MIPI Alliance is on track to release more specifications in 2021 than in any other year in the organization's history. This packed schedule covers updates to many of MIPI's most popular specifications, including all physical layer specifications, MIPI I3C® and I3C Basic℠, and those for camera and display, in addition to introducing several new specifications. James Goel, chair of the MIPI Technical Steering Group, highlights some of the key specifications released over the past year and then provides a look at what's still to come. He' also provides an overview of MIPI's development activity in particular focus areas, such as automotive, IoT, 5G and security.
MIPI DevCon Seoul 2018: Troubleshooting MIPI M-PHY Link and Protocol IssuesMIPI Alliance
Gordon Getty and Juhyun Yang, both of Teledyne LeCroy, discuss how higher-layer protocols, including UniPro® and UFS, use MIPI M-PHY® to provide an efficient, low-power storage protocol to be enabled on mobile platforms.
MIPI DevCon 2020 | Why an Integrated MIPI C-PHY/D-PHY IP is EssentialMIPI Alliance
Licinio Sousa of Synopsys describes the key advantages of the latest MIPI C-PHY℠ and D-PHY℠ specifications and how designers are implementing them in multipixel cameras and high-resolution displays targeting mobile, drone and automotive applications.
MPI DevCon Hsinchu City 2017: MIPI I3C Interface - Advanced Features MIPI Alliance
Presented by Satwant Singh of Lattice Semiconductor, this presentation covers the Flow Control and the Timing Control tools provided by MIPI I3C interface. Elements of solved problems, their challenges and practical aspects are included.
MIPI DevCon Taipei 2019: New Trends in the High-Volume Manufacturing Test of ...MIPI Alliance
Mohamed Hafed, Ph.D., chief executive officer at Introspect Technology, summarizes the fundamental requirements for quality assurance and testing methods for high-speed interfaces including MIPI D-PHY℠, C-PHY℠ and M-PHY®. The presentation includes practical examples of test cell design, test program development and multi-site screening techniques.
Matt Ronning, director of engineering at Sony Corporation, and Raj Kumar Nagpal, senior staff engineer at Synopsys, provide an update on how MIPI specifications are being leveraged into automotive systems today and offer a detailed look at the upcoming MIPI A-PHY specification, which is being designed to solve the long-reach, high-speed challenge of connecting the highest speed electronic components throughout a vehicle.
Presented by James Goel, MIPI Technical Steering Group chair, and Rick Wietfeldt, Security Working Group co-chair
This session brings you up to speed on all the latest developments within MIPI Automotive SerDes Solutions (MASS) – a framework that provides a full-stack, end-to-end sensor/display-to-ECU solution for autonomous driving and ADAS systems that leverage existing MIPI CSI-2®, DSI-2℠ and VESA eDP/DP protocols running over MIPI A-PHY℠. The presentation also explains how recent developments make it easier for you to integrate MIPI A-PHY into your next automotive E/E architecture and how, through A-PHY's adoption as an IEEE standard, it can be accessed for evaluation without MIPI membership.
In addition, the presenters discuss how recently released MIPI Camera and Display Service Extensions (CSE and DSE) and their associated protocol adaptation layers (PALs) work together to embed functional safety and security enablers natively at the "edge" – ultimately within the sensor, display and ECU components themselves.
MIPI DevCon Taipei 2019: Addressing 5G RFFE Control Challenges with MIPI RFFE...MIPI Alliance
Andrew Scott-Mackie, RF control systems engineer at Intel Corporation, discusses how MIPI RFFE℠ 3.0 aims to meet the new 5G control timing requirements and adds several enhancements to the RFFE-Trigger specification to meet 5G use cases.
This presentation, from Gregor Sievers, Ph.D., of dSPACE GmbH, addresses how the MIPI CSI-2℠, D-PHY℠, CCS, and A-PHY℠ specifications simplify validation and testing and help bring autonomous driving to the streets.
MIPI DevCon 2020 | MIPI to Bluetooth LE: Leveraging Mobile Technology for Wir...MIPI Alliance
Grant Jennings of GOWIN Semiconductor shares use case examples in the wireless IoT space found while helping customers develop new types of solutions with the first SoC FPGA with built in Bluetooth Low Energy (LE) transceiver.
MIPI DevCon 2021: MIPI I3C Signal Integrity Challenges on DDR5-based Server P...MIPI Alliance
Presented by Azusena Lupercio Ramirez, Juan Orozco and Nestor Hernandez Cruz, Intel Corporation
The MIPI I3C® protocol is first used in a server application for the DDR5 DIMM SPD function. MIPI I3C was defined for low capacitance applications, while DDR5 SPD exceeds by far the bus capacitance specification. This presentation covers the interoperability challenges of the dynamic push-pull and open-drain operating modes, on server applications with an in-depth analysis of the implications of long PCB traces, multiple DIMM routing branches, and multiple loads to the electrical and timing parameters.
The transformation of the car into a connected mobile device is occurring from the inside out, and is a perfect setting for leveraging the work done in the MIPI Alliance. The intimate (vendor controlled) system interfaces of a smartphone supplier mirror those developing to serve the auto industry. Mixel Inc.'s Ashraf Takla discusses this transformation, and how MIPI Alliance and its member companies are helping to make it happen.
MIPI DevCon Seoul 2018: Next Generation Verification Process for Automotive a...MIPI Alliance
With MIPI CSI-2℠ integrated in many complex systems, this presentation from Thierry Berdah and Yafit Snir, both of Cadence Design Systems, Inc., focuses on methodology for a full verification flow, from the IP level to the SOC level.
MIPI DevCon Taipei 2019: Enabling MIPI Camera Applications Including Automoti...MIPI Alliance
Kelvin Xu, product marketing manager at Synopsys, describes automotive ADAS designs with MIPI camera interface solutions such as CSI-2℠ and D-PHY℠, and outlines other MIPI automotive protocols, including I3C® and DSI℠.
MIPI DevCon 2020 | MIPI A-PHY: Laying the Groundwork for MIPI’s Automotive Se...MIPI Alliance
MIPI board member Ariel Lasry and A-PHY subgroup vice lead Edo Cohen share technical details of MIPI A-PHY, the cornerstone of MIPI Automotive SerDes Solutions (MASS).
MIPI DevCon 2020 | Interoperability Challenges and Solutions for MIPI I3CMIPI Alliance
This presentation from Geoffrey Duerden of Introspect Technology features a case study of several specific interoperability challenges and solutions in terms of circuit and layout guidelines, protocol implementations and target applications.
MIPI DevCon Seoul 2018: Integrating Image, Radar, IR and TOF Sensors: Develop...MIPI Alliance
In this presentation, Tom Watzka of Lattice Semiconductor Corp. provides an overview of the architectures and tradeoffs in mission-critical vision applications and the details of combining and tagging multiple data streams, including Camera Control Interface (CCI) integration.
MIPI DevCon Taipei 2019: PHY Testing Challenges and Opportunities: The Need F...MIPI Alliance
Victor Sanchez-Rico, project manager MIPI at BitifEye Digital Test Solutions GmbH, highlights the challenges observed and the lessons learned from BitifEye's experience with testing of high-speed digital interconnect busses, with a focus on the complex high-speed electrical PHY layer receiver conformance tests.
MIPI DevCon 2021: The MIPI Specification Roadmap: Driving Advancements in Mob...MIPI Alliance
Presented by James Goel, MIPI Technical Steering Group Chair
Despite the many challenges over the past year, MIPI Alliance is on track to release more specifications in 2021 than in any other year in the organization's history. This packed schedule covers updates to many of MIPI's most popular specifications, including all physical layer specifications, MIPI I3C® and I3C Basic℠, and those for camera and display, in addition to introducing several new specifications. James Goel, chair of the MIPI Technical Steering Group, highlights some of the key specifications released over the past year and then provides a look at what's still to come. He' also provides an overview of MIPI's development activity in particular focus areas, such as automotive, IoT, 5G and security.
MIPI DevCon Seoul 2018: Troubleshooting MIPI M-PHY Link and Protocol IssuesMIPI Alliance
Gordon Getty and Juhyun Yang, both of Teledyne LeCroy, discuss how higher-layer protocols, including UniPro® and UFS, use MIPI M-PHY® to provide an efficient, low-power storage protocol to be enabled on mobile platforms.
MIPI DevCon 2020 | Why an Integrated MIPI C-PHY/D-PHY IP is EssentialMIPI Alliance
Licinio Sousa of Synopsys describes the key advantages of the latest MIPI C-PHY℠ and D-PHY℠ specifications and how designers are implementing them in multipixel cameras and high-resolution displays targeting mobile, drone and automotive applications.
MPI DevCon Hsinchu City 2017: MIPI I3C Interface - Advanced Features MIPI Alliance
Presented by Satwant Singh of Lattice Semiconductor, this presentation covers the Flow Control and the Timing Control tools provided by MIPI I3C interface. Elements of solved problems, their challenges and practical aspects are included.
MIPI DevCon Taipei 2019: New Trends in the High-Volume Manufacturing Test of ...MIPI Alliance
Mohamed Hafed, Ph.D., chief executive officer at Introspect Technology, summarizes the fundamental requirements for quality assurance and testing methods for high-speed interfaces including MIPI D-PHY℠, C-PHY℠ and M-PHY®. The presentation includes practical examples of test cell design, test program development and multi-site screening techniques.
Matt Ronning, director of engineering at Sony Corporation, and Raj Kumar Nagpal, senior staff engineer at Synopsys, provide an update on how MIPI specifications are being leveraged into automotive systems today and offer a detailed look at the upcoming MIPI A-PHY specification, which is being designed to solve the long-reach, high-speed challenge of connecting the highest speed electronic components throughout a vehicle.
Presented by James Goel, MIPI Technical Steering Group chair, and Rick Wietfeldt, Security Working Group co-chair
This session brings you up to speed on all the latest developments within MIPI Automotive SerDes Solutions (MASS) – a framework that provides a full-stack, end-to-end sensor/display-to-ECU solution for autonomous driving and ADAS systems that leverage existing MIPI CSI-2®, DSI-2℠ and VESA eDP/DP protocols running over MIPI A-PHY℠. The presentation also explains how recent developments make it easier for you to integrate MIPI A-PHY into your next automotive E/E architecture and how, through A-PHY's adoption as an IEEE standard, it can be accessed for evaluation without MIPI membership.
In addition, the presenters discuss how recently released MIPI Camera and Display Service Extensions (CSE and DSE) and their associated protocol adaptation layers (PALs) work together to embed functional safety and security enablers natively at the "edge" – ultimately within the sensor, display and ECU components themselves.
MIPI DevCon Taipei 2019: Addressing 5G RFFE Control Challenges with MIPI RFFE...MIPI Alliance
Andrew Scott-Mackie, RF control systems engineer at Intel Corporation, discusses how MIPI RFFE℠ 3.0 aims to meet the new 5G control timing requirements and adds several enhancements to the RFFE-Trigger specification to meet 5G use cases.
This presentation, from Gregor Sievers, Ph.D., of dSPACE GmbH, addresses how the MIPI CSI-2℠, D-PHY℠, CCS, and A-PHY℠ specifications simplify validation and testing and help bring autonomous driving to the streets.
MIPI DevCon 2020 | MIPI to Bluetooth LE: Leveraging Mobile Technology for Wir...MIPI Alliance
Grant Jennings of GOWIN Semiconductor shares use case examples in the wireless IoT space found while helping customers develop new types of solutions with the first SoC FPGA with built in Bluetooth Low Energy (LE) transceiver.
MIPI DevCon 2021: MIPI I3C Signal Integrity Challenges on DDR5-based Server P...MIPI Alliance
Presented by Azusena Lupercio Ramirez, Juan Orozco and Nestor Hernandez Cruz, Intel Corporation
The MIPI I3C® protocol is first used in a server application for the DDR5 DIMM SPD function. MIPI I3C was defined for low capacitance applications, while DDR5 SPD exceeds by far the bus capacitance specification. This presentation covers the interoperability challenges of the dynamic push-pull and open-drain operating modes, on server applications with an in-depth analysis of the implications of long PCB traces, multiple DIMM routing branches, and multiple loads to the electrical and timing parameters.
The transformation of the car into a connected mobile device is occurring from the inside out, and is a perfect setting for leveraging the work done in the MIPI Alliance. The intimate (vendor controlled) system interfaces of a smartphone supplier mirror those developing to serve the auto industry. Mixel Inc.'s Ashraf Takla discusses this transformation, and how MIPI Alliance and its member companies are helping to make it happen.
MIPI DevCon 2021: Meeting the Needs of Next-Generation Displays with a High-P...MIPI Alliance
Presented by Alain Legault, Hardent Inc.; Joe Rodriguez, Rambus Inc.; and Justin Endo, Mixel, Inc.
Next-generation display applications have an insatiable appetite for bandwidth. Using a combination of VESA Display Stream Compression (DSC) and MIPI DSI-2℠ technology, designers can achieve display resolutions up to 8K without compromise to video quality, battery life or cost. This presentation discusses a fully integrated, off-the-shelf display IP subsystem solution, consisting of Mixel (MIPI C-PHY℠/D-PHY℠ combo), Rambus (MIPI DSI-2® controller) and Hardent (VESA DSC) IP, that can deliver this state-of-the-art performance in a power-efficient and compact footprint.
MIPI DevCon Bangalore 2017: Mobile Influenced Markets – Evolution of Camera a...MIPI Alliance
Tom Watzka and Satwant Singh of Lattice Semiconductor highlight the evolution of innovative applications in mobile-influenced markets, including the unique issues faced by system and software developers. Examples of end applications and extrapolated architectural trends for several use cases will also be explored.
Bitmovin LIVE Tech Talks: Analytics for Workflow Automation (ft. Touchstream ...Bitmovin Inc
As part of Bitmovin's NAB 2020 Virtual event series, we were joined by live video monitoring solutions provider Touchstream Media and had the chance to discuss how live-streaming organizations (such as Sports broadcasters) should automate analytics and data to best improve your video workflows.
View our on-demand discussion featuring case studies from a few major sports broadcasters: https://go.bitmovin.com/techtalk-live-analytics-automation-touchstream?utm_source=slideshare
For the full video of this presentation, please visit:
https://www.edge-ai-vision.com/2021/02/embedded-vision-in-adas-and-autonomous-vehicles-navigating-the-new-reality-a-presentation-from-strategy-analytics/
Mark Fitzgerald, Director of Autonomous Vehicle Service at Strategy Analytics, presents the “Embedded Vision in ADAS and Autonomous Vehicles: Navigating the New Reality” tutorial at the September 2020 Embedded Vision Summit.
In this presentation, Fitzgerald presents market forecasts for vision technologies in automotive advanced driver assist systems (ADAS), and explores the applications and industry forces that are driving camera fitment in vehicles. He also examines the unprecedented changes unfolding in the automotive industry – with long-standing vehicle architectures and business models under threat – and assesses the impact of COVID-19 on the industry.
Fitzgerald explains the influence of government mandates on the ADAS market, including the three generations of driver monitoring systems. Finally, he highlights what is most important and what is at stake as the automotive industry transitions to higher levels of ADAS and autonomous systems.
OpenCar covers OS development for a new market: automotive apps. In-car apps are poised to explode for open source developers. The market is transforming from an inefficient, proprietary model to an HTML5-based “app store” model. To enter and participate in this new target category, developers need access to automakers, automotive systems, and knowledge of industry standards and platforms. http://sdk.opencar.com
MPI DevCon Hsinchu City 2017: Enabling Higher Data Rates and Variety of Chann...MIPI Alliance
Hezi Saar of Synopsys describes MIPI D-PHY’s flexibility, speed, power and cost benefits for cameras and displays in mobile applications. The presentation illustrates common use cases, and details how MIPI D-PHY can operate at 2.5 Mbps over multiple lanes to enable higher performance. The presentation also gives a brief roadmap of the D-PHY specification.
PLNOG 17 - Stefan Meinders - Slow is the new DownPROIDEA
In this presentation, we will review trends in Over-the-Top (OTT) traffic usage, user behavior and rapidly growing volumes of video streaming from services such as Netflix. The amount of video traffic carried by networks and its interconnections is significant. Delivery methods and encryption are challenges for today’s methods of network analysis—as are unexpected network changes that can drastically impact subscribers, transit costs, and network overload. Recent research unveiled that existing monitoring tools cannot cope with these variations in traffic delivery, caching strategies, and encryption. Finally, we describe how the use of “big data” techniques and multi-dimensional databases combined with global internet service mapping provides new insights into traffic delivery, consumption, and quality.
MIPI DevCon Bangalore 2017: Enabling Higher Data Rates and Variety of Channel...MIPI Alliance
Raj Kumar Nagpal of Synopsys provides a brief roadmap of the D-PHY specification, including its flexibility, speed, power and cost benefits for cameras and displays in mobile applications. The presentation illustrates common use cases, and details how MIPI D-PHY can operate at 2.5 Mbps over multiple lanes to enable higher performance.
MIPI DevCon 2021: MIPI I3C Under the Spotlight: A Fireside Chat with the I3C ...MIPI Alliance
Panel discussion with Tim McKee, MIPI I3C Working Group chair; Matthew Schnoor; Eyuel Zewdu Teferi, MIPI I3C Basic Ad-hoc Working Group vice chair; and Radu Pitigoi-Aron
This session puts MIPI I3C® "under the spotlight" by assembling a panel of experts to talk about the latest developments in the world of I3C. The panel discusses the latest I3C specifications (including the latest HCI specification), how to address conformance in the absence of face-to-face plug fests, and how the MIPI I3C interface is being leveraged by other standards organizations.
MIPI DevCon 2021: MIPI I3C Application and Validation Models for IoT Sensor N...MIPI Alliance
Presented by Eyuel Zewdu Teferi, David Schumacher and Souha Kouki, STMicroelectronics
This presentation provides a global overview of using MIPI I3C® protocol for on-board communication among subsystems of an IoT sensor node. It includes adoption of MIPI CTS by using SysML models of requirements and test cases as an approach to manage I3C application use cases requirement validation.
MIPI DevCon 2021: MIPI I3C interface for the ETSI Smart Secure PlatformMIPI Alliance
Presented by Gulio Follero, ETSI
The ETSI Technical Committee Smart Card Platform (TC SCP) is developing the specification of the next generation secure element, the Smart Secure Platform (SSP). SCP is standardizing the MIPI I3C interface for SSP. This presentation describes the SSP architecture and its main use cases, followed by a discussion of how the MIPI I3C interface is adapted to the SSP and the main benefits in terms of speed, power and efficiency.
MIPI DevCon 2021: MIPI Security for Automotive and IoT – Initial Focus on MASSMIPI Alliance
Presented by Philip Hawkes and Rick Wietfeldt, co-chairs of the MIPI Security Working Group
MIPI Automotive SerDes Solutions (MASS) allows transmission of sensor and display data between sensors, electronic control units (ECUs) and displays distributed around a vehicle. The MIPI Security Working Group is developing a MASS security framework for protecting this data against malicious attacks.
This session covers the objectives of the security framework and explains how the framework achieves those objectives.
MIPI DevCon 2021: MIPI HTI, PTI and STP: The Bases for Next-Generation Online...MIPI Alliance
Presented by Thomas B. Preußer and Alexander Weiss, Accemic Technologies GmbH
The key challenge for testing and debugging embedded multicore systems is their limited observability. MIPI trace protocols provide essential operational insights non-intrusively, and this presentation advocates for the continuous online analysis of these trace data. It also contrasts the challenges posed by the vigorously compressed MIPI trace protocols with the enormous benefits that can be gained by online processing.
MIPI DevCon 2021: MIPI CSI-2 v4.0 Panel Discussion with the MIPI Camera Worki...MIPI Alliance
Panel discussion with Haran Thanigasalam, Intel Corporation, MIPI Camera Working Group chair; Natsuko Ibuki, Google, LLC;
Yuichi Mizutani, Sony Corporation; and Wonseok Lee, Samsung Electronics, Co.
MIPI DevCon 2021: MIPI D-PHY and MIPI CSI-2 for IoT: AI Edge DevicesMIPI Alliance
Presented by Ashraf Takla, Mixel Inc.
This presentation covers the deployment of MIPI D-PHY℠ and MIPI CSI-2® in IoT and edge devices. While many mobile-influenced applications benefit from the low-power, small-form factor of MIPI specifications, AI edge processors in particular are seeing a surge in the use of MIPI specifications for their sensors as market trends shift from processing in the cloud or central location, to processing at the edge.
This presentation includes a high-level system overview of a specific use case, Perceive Ergo edge inference processor, and how Mixel was able to meet Perceive’s stringent requirements with its MIPI D-PHY CSI-2 TX and D-PHY CSI-2 RX IPs.
Presented by Licinio Sousa, Synopsys, Inc., and Edo Cohen, Valens Semiconductor
Synopsys and Valens Semiconductor outline how MIPI automotive solutions can enable safe and robust long-reach connectivity for cameras and sensors. The ability for high volumes of data to travel at a fast rate over a long reach infrastructure is now mandatory in automotive vision applications. In addition, maintaining a reliable link can be the difference between successful operation and system failure in a car. In this presentation, Synopsys and Valens present a Valens MIPI A-PHY℠ design for in-vehicle connectivity using Synopsys’ ISO 26262-ready MIPI CSI-2® and MIPI C-PHY℠/D-PHY℠ IP in the FinFET process to meet their latency and bandwidth requirements. The presentation also previews examples of display applications that can benefit from the same architecture.
MIPI DevCon 2021: State of the AllianceMIPI Alliance
Get an update on MIPI Alliance priority initiatives in mobile and in the beyond-mobile focus areas of automotive, IoT and 5G. Peter Lefkin, MIPI managing director, discusses collaborative efforts within the Alliance and industry, as well as progress toward strategic priorities, including the development of key specifications and resources, education opportunities, outreach and other activities to support the MIPI member ecosystem.
MIPI DevCon 2020 | Snapshot of MIPI RFFE v3.0 from a System-Architecture Per...MIPI Alliance
Lalan Mishra, vice-chair of the MIPI RFFE Working Group, presents the new features of MIPI RFFE v3.0 to help architecture and design engineers understand how the triggering features in the latest version work together to improve performance and to switch quickly among the various bands and band combinations in a 5G system.
MIPI DevCon 2020 | The Story Behind the MIPI I3C HCI Driver for LinuxMIPI Alliance
Nicolas Pitre of BayLibre covers the work that has been done to date to plan Linux support when new technology is developed and a quick overview of future development.
Kevin Yee, chair of MIPI Marketing Steering Group, and Ian Smith, MIPI technical content manager and author of the MIPI Alliance IoT White Paper, explain the advantages of using MIPI specifications within IoT devices and provide an overview of the MIPI specifications that are most relevant to the IoT market.
This joint presentation from Ahmed Ella of Mixel and Serge Di Matteo of Renesas covers the deployment of MIPI D-PHY℠ in an autonomous driving use-case and the advantages of using MIPI specifications in functional safety applications.
MIPI DevCon 2020 | State of the AllianceMIPI Alliance
MIPI Managing Director Peter Lefkin shares an overview of progress on priority initiatives in mobile and in the beyond-mobile focus areas of automotive, IoT and 5G.
MIPI DevCon Taipei 2019 Keynote: Technologies for Automated DrivingMIPI Alliance
Simon Teng, assistant general nanager of the Intelligent Automotive Business Unit at MediaTek, discusses the mega trends of automotive, the kinds of technologies needed to realize these mega trends, and how SoC solutions with these technologies will become the foundation of automated driving systems.
MIPI DevCon Taipei 2019: An Introduction to MIPI I3C® v1.1 and What's NextMIPI Alliance
Ken Foust, principal engineer at Intel Corporation, focuses on the new features available in MIPI I3C® v1.1 and the efforts MIPI is taking to advance I3C for broad, long-term adoption across multiple industries and usages.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.