Catalogo de preparacion de muestras mineralogicas
http://www.izasa.es/productos/instrumentacion-cientifica/control-de-calidad-industrial/materialografia/preparaciones-especiales/preparacion-muestras-mineralogicas/discoplan-ts.aspx
All the process and flowchart of Lost wax casting with example and details working Process.
Made by:
Shaiful islam majumder
Dhaka University of Engineering & Technology(DUET)
All the process and flowchart of Lost wax casting with example and details working Process.
Made by:
Shaiful islam majumder
Dhaka University of Engineering & Technology(DUET)
A STEP IN CASTING OF CAST PARTIAL DENTURE, a precious duplication process and proper wax up of refractory cast results in accurate fitting of the framework of the prosthesis.
Laboratory sieves products for laboratory analysis - VIBROTECHNIKVIBROTECHNIKLLC
The Sieve Shakers are designed for intermittent dry sieving of bulk materials according to particle size.
The Sieve Shaker consists of a vibration drive with a set of sieves installed, a tray, a cover and a device
for fastening the sieves. The type of vibration drive, the number of sieves, and the intermediate rings and trays are selected depending on the order and according to the size of the mesh or the apertures in the perforated plate.
Casting procedures are the backbone of indirect restorations. No casting can be fabricated with their casting defects. It is necessary to have the knowledge of casting defects , how they occure, and how to prevent them.
this is a presentation that describes the laboratory procedure in RPD framework fabrication
also has a flow chart in the beginning explaining steps to be done by dentist and steps to be taken by laboratory technician
https://youtu.be/aaJ6gpQohcs
https://youtu.be/REMKSUty0cE
https://youtu.be/fv3_tWZPJIU
https://youtu.be/GeZIbCwqKYU
if you want me to make ppt on some topic do let me know on the comment section of my youtube channel
Dental Lab steps from mould preparation to finish/ dental education in indiaIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training
center with best faculty and flexible training programs for dental
professionals who wish to advance in their dental practice,Offers certified
courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry,
Prosthetic Dentistry, Periodontics and General Dentistry.
Academic presentation prepared for the final professional of BDS. The presentation talks about casting and investing techniques used in the Conservative Dentistry and Endodontics.
Evolution of casting machines final /orthodontic courses by Indian dental aca...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Description :
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Die and die materials/certified fixed orthodontic courses by Indian dental ac...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
report of industrial training done at MAKINO.
For over two decades, Makino Auto Industries Pvt. Ltd. has been the trusted name in the automotive industry. The company's product range of Automotive clutch assemblies, brake assemblies and components are amongst the category leaders in India and discerning markets of the world.
Established in 1990 Makino has 4 plants in India. Started as a Friction Disc manufacturer and now a complete clutch & Brake Solution Provider.
Experts of Automotive Clutches & Brakes (2W, 3W and 4W applications)
Working with major OEM in India for 2 W and 3 W applications
Vision is to provide technologically advanced clutches & brakes for existing and future vehicles.
"MAKINO is committed to consistently provide the Original Equipment Manufacturer and vehicle owner quality products.
A STEP IN CASTING OF CAST PARTIAL DENTURE, a precious duplication process and proper wax up of refractory cast results in accurate fitting of the framework of the prosthesis.
Laboratory sieves products for laboratory analysis - VIBROTECHNIKVIBROTECHNIKLLC
The Sieve Shakers are designed for intermittent dry sieving of bulk materials according to particle size.
The Sieve Shaker consists of a vibration drive with a set of sieves installed, a tray, a cover and a device
for fastening the sieves. The type of vibration drive, the number of sieves, and the intermediate rings and trays are selected depending on the order and according to the size of the mesh or the apertures in the perforated plate.
Casting procedures are the backbone of indirect restorations. No casting can be fabricated with their casting defects. It is necessary to have the knowledge of casting defects , how they occure, and how to prevent them.
this is a presentation that describes the laboratory procedure in RPD framework fabrication
also has a flow chart in the beginning explaining steps to be done by dentist and steps to be taken by laboratory technician
https://youtu.be/aaJ6gpQohcs
https://youtu.be/REMKSUty0cE
https://youtu.be/fv3_tWZPJIU
https://youtu.be/GeZIbCwqKYU
if you want me to make ppt on some topic do let me know on the comment section of my youtube channel
Dental Lab steps from mould preparation to finish/ dental education in indiaIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training
center with best faculty and flexible training programs for dental
professionals who wish to advance in their dental practice,Offers certified
courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry,
Prosthetic Dentistry, Periodontics and General Dentistry.
Academic presentation prepared for the final professional of BDS. The presentation talks about casting and investing techniques used in the Conservative Dentistry and Endodontics.
Evolution of casting machines final /orthodontic courses by Indian dental aca...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Description :
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Die and die materials/certified fixed orthodontic courses by Indian dental ac...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
report of industrial training done at MAKINO.
For over two decades, Makino Auto Industries Pvt. Ltd. has been the trusted name in the automotive industry. The company's product range of Automotive clutch assemblies, brake assemblies and components are amongst the category leaders in India and discerning markets of the world.
Established in 1990 Makino has 4 plants in India. Started as a Friction Disc manufacturer and now a complete clutch & Brake Solution Provider.
Experts of Automotive Clutches & Brakes (2W, 3W and 4W applications)
Working with major OEM in India for 2 W and 3 W applications
Vision is to provide technologically advanced clutches & brakes for existing and future vehicles.
"MAKINO is committed to consistently provide the Original Equipment Manufacturer and vehicle owner quality products.
CEREC course for dentists or dental students with a previous experience of using CEREC.
Introduction to the Sirona Premium Package, Sirona Omnicam AC and Sirona MCXL Milling Unit.
Sirona Cerec Premium 4.4.3 Software.
CAD/CAM Materials for chairside dentistry.
Principles of scanning, desining, milling and glazing:
Inlays/Onlays.
Single Conventional Crowns.
Veneers.
Three-unit bridges [FPD].
Screw Retained Crown on Implant.
Multilayer conventional Crowns, FPDs and screw retained crown.
From May 2015 the upgraded ultra-thin 1.0mm cutting wheels are available in 115mm and 125mm. Saint-Gobain Abrasives have enhanced wheel performance by up to 30%, with aggressive, yet clean cut through steel and stainless steel, reduced vibration levels and further extended product life.
Insights in CAD/CAM Dentistry
Workflow of traditional methods of crowns and bridges fabrication to CAD/CAM.
Vhf milling machines.
types of Dental Scanners
dMT SPC® dry surface coatings for the ultimate wear protection on industrial ...dmtgms
Crane Maintenance in factories, port facilities and container terminals.
dMT Ecotech GmbH in Munich, Germany, offers innovative SPC metal protective coatings for process equipment in manufacturing and logistics industries.
SPC® products are self-applying, maintenance-free, dry, protective coatings which can reduce metal surface wear up to 80%. They especially outperform conventional greases and oils in dusty environments. Applications areas include cranes, rail-mounted conveying and warehousing systems, rotating dryers & furnaces, railway vehicles. We call it: “managed coefficient of friction”.
These are not "me-too products". They are innovative, solve numerous maintenance problems for which there no better solutions, easy to install, require no worker training, operate long-term without failures and monitoring, are environmentally and worker-safe, and above all, yield substantial cost-savings in appropriate applications.
These products are certainly of interest to machinery maintenance departments in many of the following manufacturing industries: iron and steel, foundries, smelting, wood and paper products, automotive and machinery, cement, gypsum, mining & minerals, power/waste incineration plants, port facilities, logistics operations. Everywhere where heavy industrial equipment needs lubrication to reduce surface wear and maintenance costs.
Similar to Izasa-Catalogo Struers preparación muestras mineralogicas (20)
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
1. Mineralogical
Specimen Preparation
A Complete Range
of Equipment and
Consumables
Struers’ approach to mineralogy is based on four key points:
- A thoroughly tested method for the production of thin
sections without the need of special skills
- Equipment that is easy to handle
- Cost-efficiency
- Environmental protection
Struers’ range of equipment and consumables for the preparation
of mineralogical, geological and ceramic specimens covers the
entire preparation process - from initial cutting to the finished thin
section or polished section, ready for microscopic examination
The preparation of mineralogial, geological and ceramic
specimens may be divided into two main groups:
- Preparation of thin sections or polished thin sections for
microscopic examination in transmitted or reflected light
- Preparation of specimens for microscopic examination in
reflected light
2. Discoplan-TS LaboPol-35
LaboForce-Mi
CitoVac
Thin Sections
The production of thin sections requires
highly specialized equipment. When you are
dealing with a specimen thickness of e.g.
20 µm, there is no point in taking chances.
For the preparation of thin sections, Struers
has developed the TS-MethodTM
, a technique
which provides outstanding quality and very
high reproducibility. Nevertheless, it is very
easy to use. The cornerstone of the TS-
MethodTM
is Discoplan-TS, a combined cut-
ting and grinding machine specifically de-
signed for the preparation of thin sections.
Polished Sections
The preparation of mineralogical specimens
for microscopic examination in reflected
light is basically similar to the preparation
of other materials. However, some special
equipment is required. After cutting, the
specimens are normally mounted in the
vacuum impregnation unit CitoVac using
EpoFix resin. Lapping is carried out on
LaboPol-35/LaboForce-Mi by means of a
cast iron lapping disc and the composite
disc MD-Largo. The abrasives used are SiC
powder and diamonds.
Grinding, lapping and polishing can also
take place on other semi-automatic or auto-
matic preparation equipment.
Discoplan-TS - Sophistication
and Reliability
Discoplan-TS is a very versatile machine for
fast and economical production of minera-
logical thin sections. Discoplan-TS com-
bines the cutting and grinding processes
in one machine, thus reducing investments
and allowing for very fast preparation pro-
cedures.
Cutting on one hand...
The left hand side of Discoplan-TS takes
care of the cutting. A choice of two types of
diamond cut-off wheels ensures perfect cut-
ting of all materials, with a minimum of de-
formations.
The cutting module of Discoplan-TS also
carries out re-sectioning of the specimen
(cutting off surplus material): the thin sec-
tion is easily fixed in a vacuum holder con-
trolled by a guide rail on the table of the ma-
chine.
...Grinding on the Other
The right-hand side of Discoplan-TS is de-
signed for precision grinding. For automatic
preparation of thin sections all glass slides
must have exactly the same thickness with a
tolerance of a few µm. A built-in micrometer
ensures extreme precision.
Time is saved in the final processing if the
specimens can be precision ground to al-
most final thickness. Both these functions
are carried out on the grinding module of
Discoplan-TS.
Outstanding Precision
The glass slides are placed on ceramic
vacuum holders and are then moved across
a cup wheel with diamonds. The slides or
specimens may be ground with an accuracy
of ±2 µm in a couple of minutes.
The ceramic vacuum holder allows for
dressing of the cup wheel. This feature is
important to ensure absolute precision. The
vacuum holder is designed for up to three
standard specimens or standard slides at a
time, or one specimen of up to as much as
75 x 75 mm.
Accutom-50
For the occasional preparation of thin sec-
tions the precision cutting and grinding ma-
chine Accutom-50 can also be used.
On Accutom-50 both cut-off wheels for sec-
tioning and cup-wheels for grinding can be
used. The microprocessor controlled move-
ment of the specimen allows for a position-
ing accuracy of 5 µm.
The TS-MethodTM
for Preparation of
Thin Sections
1. Sampling.
2. Cutting of a specimen on Discoplan-TS.
3. Automatic lapping of the specimen on
LaboPol-35/LaboForce-Mi lapping/
polishing machine.
4. Glass slide 27 x 46 mm or 28 x 48 mm.
5. Grinding of glass slide in Discoplan-TS to a given
thickness, e.g. 1.164 mm.
6. CitoVac vacuum impregnation unit:
cementing of specimen to glass slide using
EpoFix resin.
7. Discoplan-TS: cutting off surplus specimen
material to a thickness of 0.5-2 mm.
8. Discoplan-TS: grinding of thin sections to a
thickness of 80 µm (section + EpoFix resin), up to
three specimens at a time.
9. Automatic lapping of thin section in BORTY
thin section holder on LaboPol-35/LaboForce-Mi.
Final thickness of section + resin e.g. 30 µm.
10. Automatic polishing of thin sections in TYNDS thin
section holder on LaboPol-35/LaboForce-Mi.
Reduction for a typical polishing: approximately
10 µm.
11. The specimen is now finished.
Thickness: 20 µm.
Specimen
3. LaboForce-Mi - Automation Means
Reproducibility
LaboForce-Mi is a semi-automatic specimen
mover for the production of thin sections,
polished thin sections and polished speci-
mens of mineralogical materials. The force
is applied through springs which can be in-
dividually adjusted up to maximum load of
20N. LaboForce-Mi is designed for mount-
ing on a LaboPol-35 grinding/polishing ma-
chine. LaboPol-35 has variable speed from
50 to 500 rpm, making it possible to carry
out grinding, lapping and polishing process-
es, including final polishing with oxide
polishing suspensions.
Automatic Lapping and Polishing of
Thin Sections
Sections cut to a standard size on Disco-
plan-TS, are lapped automatically on Labo-
Pol-35/LaboForce-Mi - up to eight sections
at a time. Subsequently, they are glued to a
glass slide, then cut and ground on Disco-
plan-TS.
To achieve the final thickness (e.g. 20 µm),
the sections are now lapped and polished on
LaboPol-35/LaboForce-Mi: the specimens
are placed either in a BORTY thin section
holder with boron carbide support for lap-
ping or in a TYNDS thin section holder for
polishing - up to four holders at a time. Dur-
ing the preparation, each of the thin sections
may be taken out of LaboForce-Mi separate-
ly for inspection without interfering with the
preparation of the others. Due to the auto-
mated preparation process, LaboPol-35 with
LaboForce-Mi produces specimens with very
high reproducibility.
CitoVac
Many mineralogical materials have cracks,
cavities and pores. Such materials must be
mounted under vacuum to ensure that the
entire specimen is impregnated with resin.
For this purpose, CitoVac has been devel-
oped. CitoVac is a vacuum impregnation
unit, especially designed for mounting and
impregnating of porous materials. Further-
more, CitoVac is very well suited for gluing
specimens to glass slides for the production
of thin sections. A special lid has to be used
for gluing. With CitoVac both mounting and
impregnation are carried out quickly and ef-
ficiently. CitoVac is easy to operate and ex-
tremely easy to clean.
Thin Section Holders
Thin section holders are indispensable tools
in rational precision lapping and polishing of
thin sections. Struers’ thin section holders
ensure plane specimens of perfect surface
quality and well defined and uniform thick-
ness. They are suited for both manual and
automatic preparation.
BORTY - Precision Lapping Holders with
Boron Carbide Support
The BORTY thin section holders are provid-
ed with very hard sticks of boron carbide
(B4
C) which stop any further material re-
moval when they make contact with the lap-
ping disc. This method is fast and allows for
the automatic preparation of multiple speci-
mens on LaboPol-35/LaboForce-Mi. Stand-
ard holders are available for glass slides in
three sizes.
TYNDS - Thin Section Holders
for Polishing
As diamond is used for polishing the thin
sections, BORTY can not be used as dia-
mond also removes material from the bo-
ron carbide sticks. Therefore a holder which
does not touch the polishing cloth must be
used. The TYNDS thin section holders are
designed to solve this problem. They have
the same outer dimensions as the BORTY
holders. Consequently, they can be used on
the same equipment with the same speci-
men mover disc that has already been used
for precision lapping. The holders ensure ex-
cellent polishing.
Preparation Discs and
Lapping Powders
Cast Iron Lapping Disc
A cast iron disc (300 mm) for lapping is
available. The disc is made of a special cast
iron alloy which will resist long-term influ-
ence from SiC grains, regardless of grain
size.
MD-Piano
For the fast removal of material, grinding
can be carried out using MD-Piano, a dia-
mond grinding disc. MD-Piano is available
in 5 grades, corresponding to a grit # size
of 80, 120, 220, 600 and 1200. MD-Piano is
part of the Struers MD-System
MD-Largo
MD-Largo is a composite disc for fine-grind-
ing. Diamond suspension or spray is ap-
plied in regular intervals during preparation.
The special formulation of the composite
material together with the use of diamonds
as abrasive guarantees a uniform remov-
al of material from different phases with-
out smearing, deformation or chipping. The
specimens will maintain a perfect planeness.
Lapping Powders
Lapping on cast iron discs is carried out
with SiC powder. Depending on the hard-
ness of the material the specimen is lapped
in a number of steps - from one to four.
A wide range of grain sizes is available.
Grinding with cup-wheel on Accutom-50
Thin section holders for lapping and polishing
4. www.struers.com
Struers A/S
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Phone +45 44 600 800
Fax +45 44 600 801
struers@struers.dk
Struers’ products are subject to constant product development. Therefore, we reserve the right to
introduce changes in our products without notice.
Discoplan-TS Cat.no.
Technical Data
1- or 3-phase
Rotational speed:
1400 rpm at 50 Hz, 1700 rpm at 60 Hz
Diamond cut-off wheel:
203 mm dia. 0.5-1.5 mm thickness
Diamond cup wheel: max 180 mm dia.
Precision scale including vernier: 1 µm
Vacuum chucks: 3 pieces, 30 x 50 mm
Dimensions: W x D x H: 700 x 370 x 320 mm
Weight: 65 kg
Recirculation cooling unit:
Dimensions: W x D x H: 500 x 400 x 410 mm
Weight: 7 kg
Specifications
Precision thin section machine. With 3
vacuum chucks for grinding of 3 glass slides
of 27 x 46 mm, 28 x 48 mm or 30 x 45 mm,
or 2 glass slides of 1 x 3" and specimens.
Including holder for cutting of rocks
(75 x 75 mm), holder for cutting of standard
specimens (8 x 20 x 30 mm), dial gauge and
recirculation cooling unit (025361xx).
Diamond cut-off wheels, diamond
cup-wheels and vacuum pump are
ordered separately. 037262xx
Table unit
With compartment for
recirculating cooling unit. 05116916
Diamond Cup Wheel M0P15
Metal bonded, for grinding of hard, brittle
materials on Discoplan-TS. 40800013
Diamond Cup Wheel B0P15
Resin bonded, for grinding of hard, ductile
materials on Discoplan-TS. 40800014
Diamond Cut-off Wheel M4D20
For cutting of minerals and ceramics
(HV 800). Metal bond.
202 mm dia. x 1.0 mm x 22 mm dia. 40000029
Diamond Cut-off wheel B4D20
For cutting of sintered carbides and
ceramics (HV 800). Bakelite bond.
202 mm dia. x 1.1 mm x 22 mm dia. 40000032
Vacuum Pump
Used with vacuum chucks on Discoplan-TS
and Accutom-50, -5 and -2. With vacuum:
780 mbar and output: 5.8 l/min. 037264xx
LaboPol-35
Technical Data
Rotational speeds: 50-500 rpm
Dimensions: W x D x H: 515 x 720 x 315 mm
Weight: 49 kg
Specifications
Grinding/polishing machine with continuously
variable speed (50-500 rpm). For disc 300 mm
(12") dia. with water in- and outlet and water tap.
Lid (05556901), splash guard for manual preparation
(06116905) and discs are ordered separately.
LaboForce-Mi can be mounted for mineralogical
specimen preparation.
1/3 x 200-240 V / 50-60 Hz 06116327
1 x 100 V / 50-60 Hz 06116416
LaboForce-Mi
Technical Data
Dimensions: W x D x H: 140 x 355 x 315 mm
Weight: 12 kg
Specifications
Automatic specimen mover for the preparation
of mineralogical specimens. For mounting on,
and power supply from LaboPol-35.
Lubricator included. Specimen mover plates
have to be ordered separately.
1/3 x 200-240 V / 50-60 Hz 06126327
1 x 100 V / 50-60 Hz 06126416
Specimen Mover Plates for LaboForce-Mi Cat.no.
For 8 specimens, 25 mm dia. 05236901
For 8 specimens, 30 mm dia. 05236902
For 4 specimens, 40 mm dia. 05236903
For 4 specimens, 60 mm dia. 05236904
For 8 specimens 20 x 30 mm. 05236905
Thin Section Holder BORTY
For lapping of thin sections. With Boron
Carbide Sticks. 60 mm dia. Including 4 foils
of 25 µm and 3 foils of 8 µm. 02686xxx
Set of Copper Foils
Extra set of 4 pcs. 25 µm and 6 pcs. 8 µm. 02686901
Thin Section Holder TYNDS
For polishing and lapping of thin sections,
size 60 mm dia. 02686xxx
CitoVac
Dimensions:
W x D x H 380 x 370 x 190 mm
Weight: 9.5 kg
Specifications
CitoVac with built-in vacuum ejector
Vacuum impregnation unit. Compressed
air supply 4.5 - 6 bar required.
1 x 100–240 V / 50-60 Hz. 05926119
CitoVac for external pump
Vacuum impregnation unit.
External vacuum pump required.
1 x 100-240 V / 50-60 Hz. 05926219
Lid for gluing
Complete with pressing rod and support
ring for gluing specimens on glass slides
for making thin sections. 05926904
Accessories
Standard Slides
Standard Slides for thin sections,
with ground edges. 100 pcs.
28 x 48 mm 40701018
27 x 46 mm 80100001
Microcover Glass
To be used for covering thin sections.
24 x 32 mm. Abt. 100 pcs. 40701020
Eukitt
Synthetic thermoplastic resin for mounting
of cover glasses on thin sections. 500 ml. 41000004
Cast Iron Lapping Disc
Concentrically grooved disc, for lapping
of mineralogical specimens, 300 mm dia. 40800059
SiC Powder
For lapping of mineralogical specimens.
To be used on cast iron lapping disc. Grit:
120, 220, 320, 400, 600, 800, 1000, 1200 407010xx
MD-Disc
Disc for magnetic fixation, 300 mm dia. 02426918
MD-Piano
Diamond grinding disc for grinding of
materials HV 150 - 2000
MD-Piano 80, 300 mm dia. 40800123
MD-Piano 120, 300 mm dia. 40800127
MD-Piano 220, 300 mm dia. 40800131
MD-Piano 600, 300 mm dia. 40800111
MD-Piano 1200, 300 mm dia. 40800107
MD-Largo
Maintenance-free disc for one-step fine
grinding, using diamonds 300 mm dia. 40500099
01.2011 / 62193720 Printed in Denmark by Rosendahls
For further information on CitoVac, EpoFix,
the MD-System and DP Diamond Products please see
separate brochures.
Australia & New Zealand
Struers Australia
18 Mayneview Street
Milton QLD 4064
Australia
Phone: +61 7 3512 9600
Fax: +61 7 3369 8200
info.au@struers.dk
BELGIQUE (Wallonie)
Struers S.A.S.
370, rue du Marché Rollay
F- 94507 Champigny
sur Marne Cedex
Téléphone +33 1 5509 1430
Télécopie +33 1 5509 1449
struers@struers.fr
CANADA
Struers Ltd.
7275 West Credit Avenue
Mississauga, Ontario L5N 5M9
Phone +1 905-814-8855
Fax +1 905-814-1440
info@struers.com
CHINA
Struers Ltd.
Rm. 702 Hi-Shanghai
No. 970 Dalian Road
Shanghai 200092, P.R. China
Phone +86 (21) 5228 8811
Fax +86 (21) 5228 8821
struers.cn@struers.dk
CZECH REPUBLIC
Struers GmbH
Organizační složka
Havlíčkova 361
CZ-252 63 Roztoky u Prahy
Phone +420 233 312 625
Fax: +420 233 312 640
czechrepublic@struers.de
DEUTSCHLAND
Struers GmbH
Carl-Friedrich-Benz-Strasse 5
D-47877 Willich
Telefon +49 (0) 2154 486-0
Fax +49 (0) 2154 486-222
verkauf.struers@struers.de
FRANCE
Struers S.A.S.
370, rue du Marché Rollay
F-94507 Champigny
sur Marne Cedex
Téléphone +33 1 5509 1430
Télécopie +33 1 5509 1449
struers@struers.fr
IRELAND
Struers Ltd.
Unit 11 Evolution@ AMP
Whittle Way
Catcliffe
Rotherham S60 5BL
Tel: 0845 604 6664
Fax: 0845 604 6651
info@struers.co.uk
ITALY
Struers Italia
Via Monte Grappa 80/4
20020 Arese (MI)
Tel. +39-02/38236281
Fax +39-02/38236274
struers.it@struers.dk
JAPAN
Marumoto Struers K.K.
Takara 3rd Building
18-6, Higashi Ueno 1-chome
Taito-ku, Tokyo 110-0015
Phone +81 3 5688 2914
Fax +81 3 5688 2927
struers@struers.co.jp
Netherlands/Belgium
Struers GmbH Nederland
Electraweg 5
NL-3144 CB Maassluis
Tel. +31 (0) 10 599 72 09
Fax +31 (0) 10 599 72 01
netherlands@struers.de
POLAND
Struers Sp. z o.o.
Oddział w Polsce
ul. Jasnogórska 44
31-358 Kraków
Phone +48 12 661 20 60
Fax +48 12 626 01 46
poland@struers.de
ROMANIA
Struers GmbH
Sucursala Sibiu
Str.Scoala de Inot, nr. 18
RO-550005 Sibiu
Phone +40 269 244 558
Fax +40 269 244 559
romania@struers.de
SCHWEIZ
Struers GmbH
Zweigniederlassung Schweiz
Weissenbrunnenstrasse 41
CH-8903 Birmensdorf
Telefon +41 44 777 63 07
Fax +41 44 777 63 09
switzerland@struers.de
SINGAPORE
Struers Singapore
627A Aljunied Road,
#07-08 BizTech Centre
Singapore 389842
Phone +65 6299 2268
Fax +65 6299 2661
struers.sg@struers.dk
SUOMI
Struers A/S, Sivuliike Suomessa
Kalevankatu 43
00180 Helsinki
Puhelin 0207 919 430
Faksi 0207 919 431
finland@struers.dk
www.struers.fi
SWEDEN
Struers A/S Sverige
Ekbacksvägen 22
168 69 Bromma
Telefon +46 (0)8 447 53 90
Telefax +46 (0)8 447 53 99
struers@struers.dk
UNITED KINGDOM
Struers Ltd.
Unit 11 Evolution@ AMP
Whittle Way
Catcliffe
Rotherham S60 5BL
Tel: 0845 604 6664
Fax: 0845 604 6651
info@struers.co.uk
USA
Struers Inc.
24766 Detroit Road
Westlake, OH 44145-1598
Phone +1 440 871 0071
Fax +1 440 871 8188
info@struers.com
ÖSTERREICH
Struers GmbH
Zweigniederlassung Österreich
Ginzkeyplatz 10
A-5020 Salzburg
Telefon +43 662 625 711
Fax +43 662 625 711 78
austria@struers.de