Methyl Iscoyanate
•Download as PPT, PDF•
0 likes•488 views
The document discusses methyl isocyanate (MIC), a volatile and toxic chemical. It provides details on the physical and chemical properties of MIC, as well as health, fire, and environmental hazards. It then describes the 1984 Bhopal disaster, the worst industrial catastrophe, which was caused by a leak of MIC gas from a Union Carbide plant in India, killing thousands. The document explains how an MSDS would be useful for logisticians in preventing hazards, providing first aid instructions, and ensuring safe storage and transportation of chemicals.
Report
Share
Report
Share
![Methyl Isocyanate ,[object Object],[object Object],[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/methyl-iscoyanate-1211038870416936-8/85/Methyl-Iscoyanate-1-320.jpg)
![[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Identification](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Methyl Iscoyanate
The document provides information about methyl isocyanate, including its physical and chemical properties, health and environmental hazards, fire data, applications, and details about the Bhopal disaster. It occurred at a Union Carbide plant in Bhopal, India in 1984 when a leak of methyl isocyanate gas exposed over 500,000 people, resulting in thousands of deaths. The causes included technological errors in the plant's safety systems and containment of the chemical, as well as organizational, operational, and legal errors.
Methyl Iscoyanate(version 3)
The document provides information about methyl isocyanate, including its physical and chemical properties, health and environmental hazards, fire data, applications, and details about the Bhopal disaster. It occurred at a Union Carbide plant in Bhopal, India in 1984 when a tank containing 42 tons of methyl isocyanate reacted with water, releasing toxic gas that killed thousands. Causes included technological failures, poor safety systems, and lax legal restrictions that allowed the plant in a densely populated area.
Naf s-iii-feb-2013.1
This document provides a safety data sheet for NAF S-III, a fire protection agent used for total flooding of rooms containing electrical equipment and flammable liquids. It consists of a mixture including HCFC 123, isopropenyl-1-methyl cyclohexene, HCFC 22, and chlorodifluoromethane. The document outlines handling, storage, exposure controls, accidental release measures, disposal considerations, and transport information. It also summarizes health effects such as eye and skin irritation from liquid or vapor exposure and lists first aid measures.
sterilization process
hii
Presented on based on sterilization method in Bioprocess
definition of sterilization there types
importance of sterilization
application of sterilization
phy method ,chemical method ,mechanical method
.
Sterilization is the killing or removal of all microorganisms, including bacterial spores, which are highly resistant. Or It provides environment free from living micro-organisms .
There are various methods of sterilization which are discussed below :
Physical method
Chemical method
Biological method
A . Physical Methods of Sterilization:
Heat method of sterilization
Filtration
Radiation
.
Sterilization
Sterilization is the process of eliminating all microorganisms. Physical sterilization methods include heat, radiation, and filtration. Moist heat using pressurized steam (autoclaving) is most effective, killing through protein denaturation. Dry heat is slower and some materials cannot withstand the required high temperatures. Radiation uses gamma rays, X-rays, or UV light to damage genetic material of microbes. Chemical sterilization employs alcohols, aldehydes, halogens, phenols, or gases like ethylene oxide and formaldehyde to coagulate proteins or disrupt cell membranes. Proper temperature, time, concentration and material compatibility are factors in effective sterilization.
Sterilization Process and methods of sterilization
Presented by Shahnawaz Ahmad.
Various methods of sterilization used in microbiology or other field.
contents ;
terms used in sterilization
types of sterilization
physical method
chemical method
radiation
filtration
gaseous.
Prepared media plate sterilization methods
Prepared and non-prepared petri dishes can be sterilized by several different methods. This short presentation takes a look at the different methods of plate sterilization, how they "do their thing," and which we're most likely to use in the lab.
Sterilization ppt
This document discusses various methods of sterilization including physical methods like heat and radiation, as well as chemical methods. It provides details on different types of heat sterilization such as dry heat using hot air ovens or flaming, and moist heat using autoclaving, boiling, pasteurization, or tyndallization. Radiation methods like gamma rays, UV light, and infrared radiation are also explained. The document aims to introduce the key sterilization processes and their working mechanisms at destroying microbes.
Recommended
Methyl Iscoyanate
The document provides information about methyl isocyanate, including its physical and chemical properties, health and environmental hazards, fire data, applications, and details about the Bhopal disaster. It occurred at a Union Carbide plant in Bhopal, India in 1984 when a leak of methyl isocyanate gas exposed over 500,000 people, resulting in thousands of deaths. The causes included technological errors in the plant's safety systems and containment of the chemical, as well as organizational, operational, and legal errors.
Methyl Iscoyanate(version 3)
The document provides information about methyl isocyanate, including its physical and chemical properties, health and environmental hazards, fire data, applications, and details about the Bhopal disaster. It occurred at a Union Carbide plant in Bhopal, India in 1984 when a tank containing 42 tons of methyl isocyanate reacted with water, releasing toxic gas that killed thousands. Causes included technological failures, poor safety systems, and lax legal restrictions that allowed the plant in a densely populated area.
Naf s-iii-feb-2013.1
This document provides a safety data sheet for NAF S-III, a fire protection agent used for total flooding of rooms containing electrical equipment and flammable liquids. It consists of a mixture including HCFC 123, isopropenyl-1-methyl cyclohexene, HCFC 22, and chlorodifluoromethane. The document outlines handling, storage, exposure controls, accidental release measures, disposal considerations, and transport information. It also summarizes health effects such as eye and skin irritation from liquid or vapor exposure and lists first aid measures.
sterilization process
hii
Presented on based on sterilization method in Bioprocess
definition of sterilization there types
importance of sterilization
application of sterilization
phy method ,chemical method ,mechanical method
.
Sterilization is the killing or removal of all microorganisms, including bacterial spores, which are highly resistant. Or It provides environment free from living micro-organisms .
There are various methods of sterilization which are discussed below :
Physical method
Chemical method
Biological method
A . Physical Methods of Sterilization:
Heat method of sterilization
Filtration
Radiation
.
Sterilization
Sterilization is the process of eliminating all microorganisms. Physical sterilization methods include heat, radiation, and filtration. Moist heat using pressurized steam (autoclaving) is most effective, killing through protein denaturation. Dry heat is slower and some materials cannot withstand the required high temperatures. Radiation uses gamma rays, X-rays, or UV light to damage genetic material of microbes. Chemical sterilization employs alcohols, aldehydes, halogens, phenols, or gases like ethylene oxide and formaldehyde to coagulate proteins or disrupt cell membranes. Proper temperature, time, concentration and material compatibility are factors in effective sterilization.
Sterilization Process and methods of sterilization
Presented by Shahnawaz Ahmad.
Various methods of sterilization used in microbiology or other field.
contents ;
terms used in sterilization
types of sterilization
physical method
chemical method
radiation
filtration
gaseous.
Prepared media plate sterilization methods
Prepared and non-prepared petri dishes can be sterilized by several different methods. This short presentation takes a look at the different methods of plate sterilization, how they "do their thing," and which we're most likely to use in the lab.
Sterilization ppt
This document discusses various methods of sterilization including physical methods like heat and radiation, as well as chemical methods. It provides details on different types of heat sterilization such as dry heat using hot air ovens or flaming, and moist heat using autoclaving, boiling, pasteurization, or tyndallization. Radiation methods like gamma rays, UV light, and infrared radiation are also explained. The document aims to introduce the key sterilization processes and their working mechanisms at destroying microbes.
Physical Methods of Sterliztaion
Physical methods of sterilization include heat, radiation, filtration, and chemical agents. Heat-based methods like autoclaving use high temperatures to kill microbes through protein denaturation. Radiation methods employ UV light or gamma rays which damage microbial DNA. Filtration removes microbes by trapping them in fine pore membranes or filters. Sterilization is important in healthcare and food production to prevent transmission of disease and control microbial growth.
Sterilization and disinfection
This document discusses sterilization and disinfection methods. It defines sterilization as removing all microbes including bacterial spores, while disinfection removes microbes but not spores. Physical sterilization methods include heat (dry and moist), radiation, filtration, and vibration. Chemical sterilization agents mentioned are ethylene oxide, formaldehyde, and betapropiolactone. Common disinfectants listed are alcohol, phenol, chlorhexane, glutaraldehyde, povidone-iodine, and chloroform. The document emphasizes that sterilization processes must be validated and carefully performed for effective results.
Batch sterilization
Batch sterilization involves injecting steam directly or indirectly into culture media inside a bioreactor to sterilize it at 121°C. It is the most widely used sterilization technique due to its simplicity but requires hours to heat, sterilize, and cool the entire bioreactor contents, consuming significant energy. Damage to nutrients and changes in pH of the culture media are also common disadvantages of batch sterilization.
Physical methods of Sterilisation
This document discusses various methods of sterilization. It defines key terms like sterilization, disinfection, and antisepsis. It explains how sterilization works by disrupting the cell walls, membranes, and envelopes of microorganisms. The two main methods of sterilization discussed are physical methods like heat and radiation, and chemical methods using various agents. Heat sterilization can be achieved through dry heat methods like flaming and hot air ovens, or moist heat methods like steam under pressure in an autoclave. Proper packaging, steam penetration, air removal and drying are important for effective sterilization in an autoclave.
Safety And Health In Chemical Industries
This document discusses safety and health in the chemical industry, with a focus on IFFCO Aonla Unit in India. It outlines various risks in chemical plants like fires, explosions, exposure to hazardous materials. It describes safety measures at IFFCO Aonla like the site location, construction design with protection zones, process safety systems, and total safety management program. Key aspects of the ammonia production process and associated occupational health hazards are also summarized.
Sterilization of laboratory equipment
This document discusses different methods for sterilizing laboratory equipment. It describes sterilization using dry heat methods like flaming, hot air ovens heating to 140°C, 160°C, or 180°C. Moist heat sterilization methods are also outlined, including boiling instruments in NaOH solution, autoclaving at 121°C for 25-30 minutes, and moist heat at 100°C for vaccine preparation. Additional sterilization techniques covered are ionizing radiation using UV, X-rays or gamma rays; and chemical methods employing alcohol, hydrogen peroxide, or glutaraldehyde solution.
EZFLOFR100A-21
Product Identifier: EasyFlo 100 FR Liquid Plastic Part A
Product Code(s): EZFLO100FRA
Use: Component for Polyurethane Casting/Mold Shell
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Diethyl Ether (DEE): Safety and Health Consideration
Hazard, Safety & environmental Risks for Diethyl ether production. Factors affecting human health. Plant safety with better process control.
1411A-21
Product Identifier: Poly-Optic® 1411 Clear Casting Resin Part A
Product Code(s): 1411A
Use: Component for Polyurethane Clear Casting Resin.
For Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Sterilization
This document discusses sterilization and various sterilization methods. It defines sterilization as making something free from all microorganisms, including bacteria and spores. It then describes different terms used in sterilization like disinfection, antisepsis, and discusses physical sterilization methods like dry heat, moist heat and radiation. Chemical sterilization methods using agents like alcohol, aldehydes, dyes, halogens and phenols are also outlined. Finally, the document briefly discusses the mechanical sterilization method of passing solutions through filters to remove microorganisms.
Sterilization and disinfections
The document discusses sterilization and disinfection methods. Sterilization kills all microorganisms including bacterial spores, while disinfection kills most pathogens but not spores. Methods of sterilization include physical methods like radiation, filtration and heat as well as chemical methods. Radiation can be ionizing or non-ionizing, with UV rays used for surface disinfection. Filtration removes microbes using depth or membrane filters. Heat sterilization is reliable, with dry heat applied to thermostable items in hot air ovens at 160-170°C for 2-3 hours.
sterilization by Radiation filtration
Sterilization by radiation
ionized
Xray
Gamma ray
non ionized
ultraviolet rays
Ionized radiation
ionize water to highly reactive free radicals
which can break strands of DNA
non ionized radiation
ultraviolet ray induce pyrimidine dimers in the
nucleic acid
mutation in in critical genes cause bacterial cell
death used to sterilize heat labile solution
decontaminate hospital operating room
food processing areas
Gamma rays
produced from radioactive isotope especially
cobalt60 for disposable plastic
Infrared sun light infra red lamp
sterilize by heating
Mechanical sterilization
by filtration
sartorius filter
syringe filter
removal of bacteria from media by mechanical method
used for sterilization of serum
culture media
bacteriological media
membrane filter with 0.45---0.2 millimicron disc
Sterilization 2
Moist heat in the forms of autoclaving, boiling water, and hot water below boiling point can be used to sterilize objects. Autoclaving at 121-134°C for 15 minutes is effective at destroying microorganisms using steam under pressure. Chemical disinfectants like alcohols, aldehydes, phenols, halogens, heavy metals, and surfactants can destroy pathogens using various modes of action like disrupting membranes or oxidizing proteins. Sterilizing gases such as ethylene oxide and formaldehyde gas are also used to sterilize heat-sensitive materials.
Sterilization
This document discusses sterilization processes and aseptic processing. It defines sterilization as any process that eliminates transmissible agents from a surface or material. There are two main types of sterilization discussed - terminal sterilization which uses low heat (115°C) and aseptic processing which uses sterile components and an aseptic work area to prevent microbiological contamination. The document outlines the essential elements of aseptic processing including facilities, equipment, personnel and product testing needed to attain and maintain sterility.
Sterilisation
The document discusses various methods of sterilization including physical, chemical, and mechanical methods. Physical sterilization methods include dry heat sterilization using hot air ovens at 160°C for 2 hours, and moist heat sterilization using autoclaves pressurized with steam at temperatures between 115-135°C. Radiation sterilization can utilize ultraviolet light or ionizing radiation. Chemical methods involve heating with bactericides, while mechanical filtration uses ceramic, glass or metal filters to sterilize parenteral preparations. Proper packaging and conditions are required for effective sterilization using these various methods.
Sterilisation &disinfection microbiology revision notes
Sterilization is a process that destroys or removes all living microorganisms. There are various sterilization methods including heat sterilization methods like dry heat sterilization using hot air ovens, flame sterilization, and moist heat sterilization using steam under pressure in an autoclave. Chemical methods include the use of ethylene oxide, formaldehyde, and glutaraldehyde. Radiation methods involve the use of ionizing radiation like gamma rays or non-ionizing radiation like infrared rays. Proper sterilization controls and standards must be followed to validate the sterilization process. Biomedical waste is categorized into different colored bins for appropriate treatment and disposal.
Ster
Sterilization can be achieved through physical, chemical, or mechanical means to eliminate all life forms. Physical sterilization methods include dry heat (such as flaming or hot air ovens), moist heat (such as autoclaving, boiling, or pasteurization), and radiation (such as x-rays or gamma rays). Chemical sterilization uses antimicrobial agents like formaldehyde, halogens, or chloroform. Mechanical sterilization filters microbes from liquids and gases. The most effective sterilization depends on the item and desired outcome.
Hydrofluoric Acid #3
This document provides information on the hazards and safe handling of hydrofluoric acid (HF). HF is a highly hazardous liquid and vapor that causes severe burns. It can penetrate the skin and bones, and exposure may be fatal if swallowed or inhaled. The summary describes first aid measures for different exposure routes and symptoms of HF poisoning including burns and hypocalcemia. Firefighting procedures are outlined, and uses of HF in various industries are listed, along with examples of HF accidents and pollution incidents.
Physical agents of sterilizations
1. Physical agents of sterilization include mechanical means like scrubbing, filtration, and sedimentation which remove microbes but do not fully sterilize.
2. Heat is the most effective sterilization method, where moist heat like autoclaving uses steam under pressure to kill all microbes including spores at 120°C in 15-45 minutes.
3. Other physical sterilization methods include drying, UV radiation, x-rays, fluorescent dyes activated by light, and pasteurization which heats liquids to kill pathogens without compromising food quality.
Sterlization
Sterilization kills all microbes including spores, while disinfection kills most pathogens but not necessarily all spores. Sterilization methods include heat (dry heat, moist heat like autoclaving), radiation, filtration, gases (ethylene oxide), and plasma. Autoclaving at 121°C for 20 minutes is the most effective sterilization method. Other methods like dry heat, boiling, filtration and chemicals are used for heat-sensitive items or liquids. Proper monitoring of the sterilization process is important to ensure complete sterilization.
Arnaud\'s Academic oral presentation
McDonald's is the world's largest fast food chain with over 31,000 restaurants in 119 countries. Some key points about McDonald's:
- It opened its first restaurant in Illinois in 1955.
- There are now over 18,000 franchised restaurants.
- McDonald's is looking to reposition its brand in response to trends toward healthier eating and concerns over obesity.
In It Status Report 20080428
Este relatório descreve as atividades realizadas pela equipe no período de 14 a 28 de abril de 2008, incluindo melhorias no design e máquina de estados do software Trac, preparação da infraestrutura do projeto e treinamento da equipe. Algumas atividades planejadas foram impedidas devido à indisponibilidade do cliente e da equipe. As próximas atividades incluem integrar funcionalidades de detecção de casos similares e atribuição dinâmica de tarefas no Trac.
More Related Content
What's hot
Physical Methods of Sterliztaion
Physical methods of sterilization include heat, radiation, filtration, and chemical agents. Heat-based methods like autoclaving use high temperatures to kill microbes through protein denaturation. Radiation methods employ UV light or gamma rays which damage microbial DNA. Filtration removes microbes by trapping them in fine pore membranes or filters. Sterilization is important in healthcare and food production to prevent transmission of disease and control microbial growth.
Sterilization and disinfection
This document discusses sterilization and disinfection methods. It defines sterilization as removing all microbes including bacterial spores, while disinfection removes microbes but not spores. Physical sterilization methods include heat (dry and moist), radiation, filtration, and vibration. Chemical sterilization agents mentioned are ethylene oxide, formaldehyde, and betapropiolactone. Common disinfectants listed are alcohol, phenol, chlorhexane, glutaraldehyde, povidone-iodine, and chloroform. The document emphasizes that sterilization processes must be validated and carefully performed for effective results.
Batch sterilization
Batch sterilization involves injecting steam directly or indirectly into culture media inside a bioreactor to sterilize it at 121°C. It is the most widely used sterilization technique due to its simplicity but requires hours to heat, sterilize, and cool the entire bioreactor contents, consuming significant energy. Damage to nutrients and changes in pH of the culture media are also common disadvantages of batch sterilization.
Physical methods of Sterilisation
This document discusses various methods of sterilization. It defines key terms like sterilization, disinfection, and antisepsis. It explains how sterilization works by disrupting the cell walls, membranes, and envelopes of microorganisms. The two main methods of sterilization discussed are physical methods like heat and radiation, and chemical methods using various agents. Heat sterilization can be achieved through dry heat methods like flaming and hot air ovens, or moist heat methods like steam under pressure in an autoclave. Proper packaging, steam penetration, air removal and drying are important for effective sterilization in an autoclave.
Safety And Health In Chemical Industries
This document discusses safety and health in the chemical industry, with a focus on IFFCO Aonla Unit in India. It outlines various risks in chemical plants like fires, explosions, exposure to hazardous materials. It describes safety measures at IFFCO Aonla like the site location, construction design with protection zones, process safety systems, and total safety management program. Key aspects of the ammonia production process and associated occupational health hazards are also summarized.
Sterilization of laboratory equipment
This document discusses different methods for sterilizing laboratory equipment. It describes sterilization using dry heat methods like flaming, hot air ovens heating to 140°C, 160°C, or 180°C. Moist heat sterilization methods are also outlined, including boiling instruments in NaOH solution, autoclaving at 121°C for 25-30 minutes, and moist heat at 100°C for vaccine preparation. Additional sterilization techniques covered are ionizing radiation using UV, X-rays or gamma rays; and chemical methods employing alcohol, hydrogen peroxide, or glutaraldehyde solution.
EZFLOFR100A-21
Product Identifier: EasyFlo 100 FR Liquid Plastic Part A
Product Code(s): EZFLO100FRA
Use: Component for Polyurethane Casting/Mold Shell
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Diethyl Ether (DEE): Safety and Health Consideration
Hazard, Safety & environmental Risks for Diethyl ether production. Factors affecting human health. Plant safety with better process control.
1411A-21
Product Identifier: Poly-Optic® 1411 Clear Casting Resin Part A
Product Code(s): 1411A
Use: Component for Polyurethane Clear Casting Resin.
For Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Sterilization
This document discusses sterilization and various sterilization methods. It defines sterilization as making something free from all microorganisms, including bacteria and spores. It then describes different terms used in sterilization like disinfection, antisepsis, and discusses physical sterilization methods like dry heat, moist heat and radiation. Chemical sterilization methods using agents like alcohol, aldehydes, dyes, halogens and phenols are also outlined. Finally, the document briefly discusses the mechanical sterilization method of passing solutions through filters to remove microorganisms.
Sterilization and disinfections
The document discusses sterilization and disinfection methods. Sterilization kills all microorganisms including bacterial spores, while disinfection kills most pathogens but not spores. Methods of sterilization include physical methods like radiation, filtration and heat as well as chemical methods. Radiation can be ionizing or non-ionizing, with UV rays used for surface disinfection. Filtration removes microbes using depth or membrane filters. Heat sterilization is reliable, with dry heat applied to thermostable items in hot air ovens at 160-170°C for 2-3 hours.
sterilization by Radiation filtration
Sterilization by radiation
ionized
Xray
Gamma ray
non ionized
ultraviolet rays
Ionized radiation
ionize water to highly reactive free radicals
which can break strands of DNA
non ionized radiation
ultraviolet ray induce pyrimidine dimers in the
nucleic acid
mutation in in critical genes cause bacterial cell
death used to sterilize heat labile solution
decontaminate hospital operating room
food processing areas
Gamma rays
produced from radioactive isotope especially
cobalt60 for disposable plastic
Infrared sun light infra red lamp
sterilize by heating
Mechanical sterilization
by filtration
sartorius filter
syringe filter
removal of bacteria from media by mechanical method
used for sterilization of serum
culture media
bacteriological media
membrane filter with 0.45---0.2 millimicron disc
Sterilization 2
Moist heat in the forms of autoclaving, boiling water, and hot water below boiling point can be used to sterilize objects. Autoclaving at 121-134°C for 15 minutes is effective at destroying microorganisms using steam under pressure. Chemical disinfectants like alcohols, aldehydes, phenols, halogens, heavy metals, and surfactants can destroy pathogens using various modes of action like disrupting membranes or oxidizing proteins. Sterilizing gases such as ethylene oxide and formaldehyde gas are also used to sterilize heat-sensitive materials.
Sterilization
This document discusses sterilization processes and aseptic processing. It defines sterilization as any process that eliminates transmissible agents from a surface or material. There are two main types of sterilization discussed - terminal sterilization which uses low heat (115°C) and aseptic processing which uses sterile components and an aseptic work area to prevent microbiological contamination. The document outlines the essential elements of aseptic processing including facilities, equipment, personnel and product testing needed to attain and maintain sterility.
Sterilisation
The document discusses various methods of sterilization including physical, chemical, and mechanical methods. Physical sterilization methods include dry heat sterilization using hot air ovens at 160°C for 2 hours, and moist heat sterilization using autoclaves pressurized with steam at temperatures between 115-135°C. Radiation sterilization can utilize ultraviolet light or ionizing radiation. Chemical methods involve heating with bactericides, while mechanical filtration uses ceramic, glass or metal filters to sterilize parenteral preparations. Proper packaging and conditions are required for effective sterilization using these various methods.
Sterilisation &disinfection microbiology revision notes
Sterilization is a process that destroys or removes all living microorganisms. There are various sterilization methods including heat sterilization methods like dry heat sterilization using hot air ovens, flame sterilization, and moist heat sterilization using steam under pressure in an autoclave. Chemical methods include the use of ethylene oxide, formaldehyde, and glutaraldehyde. Radiation methods involve the use of ionizing radiation like gamma rays or non-ionizing radiation like infrared rays. Proper sterilization controls and standards must be followed to validate the sterilization process. Biomedical waste is categorized into different colored bins for appropriate treatment and disposal.
Ster
Sterilization can be achieved through physical, chemical, or mechanical means to eliminate all life forms. Physical sterilization methods include dry heat (such as flaming or hot air ovens), moist heat (such as autoclaving, boiling, or pasteurization), and radiation (such as x-rays or gamma rays). Chemical sterilization uses antimicrobial agents like formaldehyde, halogens, or chloroform. Mechanical sterilization filters microbes from liquids and gases. The most effective sterilization depends on the item and desired outcome.
Hydrofluoric Acid #3
This document provides information on the hazards and safe handling of hydrofluoric acid (HF). HF is a highly hazardous liquid and vapor that causes severe burns. It can penetrate the skin and bones, and exposure may be fatal if swallowed or inhaled. The summary describes first aid measures for different exposure routes and symptoms of HF poisoning including burns and hypocalcemia. Firefighting procedures are outlined, and uses of HF in various industries are listed, along with examples of HF accidents and pollution incidents.
Physical agents of sterilizations
1. Physical agents of sterilization include mechanical means like scrubbing, filtration, and sedimentation which remove microbes but do not fully sterilize.
2. Heat is the most effective sterilization method, where moist heat like autoclaving uses steam under pressure to kill all microbes including spores at 120°C in 15-45 minutes.
3. Other physical sterilization methods include drying, UV radiation, x-rays, fluorescent dyes activated by light, and pasteurization which heats liquids to kill pathogens without compromising food quality.
Sterlization
Sterilization kills all microbes including spores, while disinfection kills most pathogens but not necessarily all spores. Sterilization methods include heat (dry heat, moist heat like autoclaving), radiation, filtration, gases (ethylene oxide), and plasma. Autoclaving at 121°C for 20 minutes is the most effective sterilization method. Other methods like dry heat, boiling, filtration and chemicals are used for heat-sensitive items or liquids. Proper monitoring of the sterilization process is important to ensure complete sterilization.
What's hot (20)
Diethyl Ether (DEE): Safety and Health Consideration
Diethyl Ether (DEE): Safety and Health Consideration
Sterilisation &disinfection microbiology revision notes
Sterilisation &disinfection microbiology revision notes
Viewers also liked
Arnaud\'s Academic oral presentation
McDonald's is the world's largest fast food chain with over 31,000 restaurants in 119 countries. Some key points about McDonald's:
- It opened its first restaurant in Illinois in 1955.
- There are now over 18,000 franchised restaurants.
- McDonald's is looking to reposition its brand in response to trends toward healthier eating and concerns over obesity.
In It Status Report 20080428
Este relatório descreve as atividades realizadas pela equipe no período de 14 a 28 de abril de 2008, incluindo melhorias no design e máquina de estados do software Trac, preparação da infraestrutura do projeto e treinamento da equipe. Algumas atividades planejadas foram impedidas devido à indisponibilidade do cliente e da equipe. As próximas atividades incluem integrar funcionalidades de detecção de casos similares e atribuição dinâmica de tarefas no Trac.
Revolucin Industrial Segunda Parte 28755
El documento resume los principales aspectos económicos y sociales de la Revolución Industrial en Inglaterra y Europa en los siglos XVIII y XIX. Explica las ideas del capitalismo liberal de Adam Smith y el socialismo de Karl Marx. Describe las duras condiciones de trabajo en las fábricas y minas de la época. Finalmente, plantea preguntas sobre los cambios económicos, sociales y artísticos resultantes de la Revolución Industrial.
Nota De Falecimento
Os funcionários de uma empresa encontram um cartaz anunciando o falecimento da pessoa que atrapalhava o progresso de cada um. Ao chegarem no velório e olharem no caixão, cada um vê a si mesmo refletido no espelho, percebendo que o único responsável por limitar seu crescimento é você mesmo.
Ser Poesia
A essência da poesia não é o verso... o verso é somente o berço onde o sentido dorme... até que tu chegas...
Viajeros
O documento lista 12 lugares europeus únicos para se visitar, incluindo Veneza, Cairo, Jaipur, Berlim, Roma e Varanasi. Ele descreve esses locais como únicos, típicos, míticos, caóticos, criativos, clássicos e espirituais. O texto então afirma que a partir de agora ensinará os 12 rincones europeus imperdíveis, não esquecendo da comida, bebida e café.
PresentacióN1
Un Centro de Investigación y Desarrollo Tecnológico en la Universidad Pedagógica Nacional tiene como objetivo llevar a cabo procesos de investigación, formación e innovación científico-tecnológica en tecnologías de la información y la educación, establecer alianzas con empresas, y desarrollar soluciones educativas culturales y tecnológicas. El Centro se basa en cuatro capitales: conocimiento, relacional, tecnológico y estructural. Su perspectiva organizacional articula enfo
X Am National Parks Usa
The United States has a national park system that helps preserve natural and historic sites across the country. While there are many national parks, this document does not provide any details about specific parks, locations, features, or reasons for their creation. It only mentions "U.S.A. NATIONAL PARKS" but lacks any further information.
Historia De La Micologa
El documento proporciona una historia de la micología, desde las primeras representaciones de hongos en el antiguo Egipto y las civilizaciones mesoamericanas, pasando por el estudio de los hongos en la antigua Grecia y Roma y su relación con procesos como la fermentación. Luego resume los principales descubrimientos y avances en la clasificación de hongos desde el siglo XVII hasta principios del siglo XX, incluyendo el descubrimiento de hongos patógenos responsables de enfermedades como la criptococ
OPL
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Búsqueda de Imágenes en Internet
El documento describe los pasos para buscar e imagen en Google y guardarla en la computadora. Estos pasos incluyen cargar el navegador, ir a Google, buscar una imagen por tema, hacer clic en una imagen para verla a tamaño completo, hacer clic derecho y guardar la imagen en una carpeta de la computadora.
Aa4 Cerro Del Castillo
Este documento contiene varios anuncios de diferentes municipios españoles. Incluye información sobre la aprobación de la distribución de fondos para proyectos de cooperación y derechos humanos en Alcalá de Henares, licencias solicitadas para nuevas actividades comerciales en Alcobendas, detalles de una licitación para obras de construcción de un ascensor en Alcobendas, y el anuncio de la exposición del padrón del impuesto sobre bienes inmuebles en Alcorcón.
Arte Con Solo Una Hoja De Papel
Un concurso de arte en la Galería de Arte Moderno Hirshhorn en Washington D.C. pidió a los artistas que crearan representaciones de cómo Dios creó al amigo usando solo una hoja de papel. Los participantes enviaron sus obras para el concurso con la regla de que solo podían usar una hoja de papel.
Presentacion Basket
Los mejores jugadores de baloncesto de la NBA y Europa, incluyendo a Kobe Bryant, Tim Duncan, Jason Kidd, Pau Gasol, Lebron James y otros.
Prevenir Remitido Por Andrea
Este documento es una carta escrita en el año 2070 donde el autor describe cómo la sobreexplotación de los recursos hídricos llevó a una crisis ambiental global irreversible. Relata cómo la falta de agua afectó negativamente la salud, la economía y la calidad de vida. Además, expresa remordimiento por la destrucción del medio ambiente a manos de su generación y duda de la habitabilidad futura de la Tierra.
Nfs
El documento describe el Sistema de Archivos de Red NFS. NFS permite que sistemas conectados a una red accedan archivos remotos como si fueran locales. Consiste en un servidor y uno o más clientes. Ofrece primitivas como abrir, leer y escribir archivos de forma remota. Existen versiones NFSv2, NFSv3 y NFSv4 con diferentes características y compatibilidad. En sistemas UNIX, demonios como lockd y statd implementan servicios de bloqueo de archivos y detección de fallos de servidores N
Viewers also liked (20)
Similar to Methyl Iscoyanate
PolyPoxy® Quick Stick Adhesive Part A
Product Identifier: PolyPoxy® Quick Stick Adhesive Part A
Product Code(s): QUICKSTICKA
Use: Epoxy resin for epoxy system.
For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042 USA
Phone Number: +1 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 703-527-3887
E-mail: sds@polytek.com
EZF90A-21
Product Identifier: EasyFlo 90 Liquid Plastic Part A
Product Code(s): EZFLO90A
Use: Component for Polyurethane Casting/Mold Shell
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
15A-21
Product Identifier: Poly 15-3 Liquid Plastic Part A
Poly 15-3X Liquid Plastic Part A
Poly 15-6 Liquid Plastic Part A
Poly 15-8 Liquid Plastic Part A
Poly 1511, 1512 & 1512X Liquid Plastic Part A*
*Product code for this product is 1512A.
Product Code(s): 15-3A, 15-3XA, 15-6A, 15-8A, 1512A
Use: Component for Liquid Polyurethane Casting
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
EZFLO120_SprayA-21
Product Identifier: c
EasyFlo Spray FR Liquid Plastic Part A
Product Code(s): EZFLO120A, EZSPRAYFRA
Use: Component for Polyurethane Casting/Mold Shell
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
1420A-21
Product Identifier: Poly-Optic® 1420 Clear Casting Resin Part A
Product Code(s): 1420A
Use: Component for Polyurethane Clear Casting Resin.
For Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
PT Flex D60 Casting Resin Part A
Product Identifier: PT Flex D60 Casting Resin Part A
Product Code(s): PTFLEXD60A
Use: Component for Polyurethane Casting Resin. For
Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
PT Flex D60 Casting Resin Part A
Product Identifier: PT Flex D60 Casting Resin Part A
Product Code(s): PTFLEXD60A
Use: Component for Polyurethane Casting Resin. For
Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
TinSil® 80-Series Silicone Rubber Part A
Product Identifier: TinSil®
80-Series Silicone Rubber Part A
Product Code(s): 8030A
Use: Component for silicone mold rubber. For
Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
TinSil® 80-Series Silicone Rubber Part A
Product Identifier: TinSil®
80-Series Silicone Rubber Part A
Product Code(s): 8030A
Use: Component for silicone mold rubber. For
Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
crude-sweet
This document provides a material safety data sheet for crude oil (sweet). It lists crude oil as a complex mixture of aliphatic and aromatic hydrocarbons used for process streams, fuels and lubricants production. The main hazards are that it is flammable and toxic due to benzene content. Protective equipment like respirators and gloves are recommended to prevent skin and inhalation exposure when handling. In case of accidental contact, immediately flush exposed areas and seek medical help.
paraffin wax Sinopec maoming
paraffin wax Sinopec maoming-Quy cách : 50kg/bao
sử dụng trong sản xuất nến, bôi trơn cho nhựa, tạo bóng cho giấy,chống thấm cho gỗ...
liên hệ: Mr Đường-0946546655
Sáp paraffin wax
This document provides information on Sinopec Maoming fully refined 58°C paraffin wax. It describes the product's properties including a melting point of 58-60 Celsius and oil content of less than 0.8%. Applications listed include candle making, wax carving, and matches. The document also provides safety information, advising the product is not classified as hazardous according to EU directives. It describes handling, storage, and personal protective equipment recommendations.
Methylene Chloride MSDS | Elchemy
Pharmaceuticals, paint and coatings, adhesives, and other sectors use the potent and adaptable chemical known as methylene chloride solvent extensively. In order to fulfil the highest industry standards, Elchemy provides premium-grade methylene chloride solvent.
To find out more about our wide selection of chemical products, including our premium methylene chloride solvent, get in touch with us right away.
sterilisation-.pptx
Dr. Ibrahim presented on various sterilization methods including physical agents like heat, radiation, and filtration as well as chemical agents like alcohols, aldehydes, and gases. The most common sterilization methods used in laboratories are moist heat using an autoclave at 121°C for 15 minutes or 134°C for 3 minutes, dry heat using a hot air oven at 160-180°C, and chemical methods using ethylene oxide or beta propiolactone gases. Proper testing of sterilization efficacy includes using chemical, mechanical, and biological indicators to confirm sterilizing conditions have been met.
Sterilization and disinfection for lab technicians.pdf
Sterilization is a process that eliminates all microorganisms, including bacterial spores. There are physical (heat, radiation) and chemical (ethylene oxide, hydrogen peroxide) methods. The most reliable and effective method is moist heat sterilization using an autoclave, which applies steam under pressure to reach high temperatures. Strict sterilization is important for preventing infection in healthcare settings.
Sodium Laureth Sulfate Manufacturers - Prakash Chemicals International
This document provides safety information on a product called sodium lauryl ether sulfate. It contains sections on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transportation information, and regulatory information. The key hazards identified are skin and eye irritation. It is a white or light yellow gelatinous paste that is soluble in water and ethanol.
Methyl alcohol
This document provides a material safety data sheet for methyl alcohol (methanol). It lists methanol's chemical and physical properties, potential health hazards, exposure limits, precautions for safe handling and storage, accidental spill measures, toxicological information, and regulatory information. Methanol is a colorless, flammable liquid with an alcohol-like odor. It is a simple asphyxiant that can cause blindness and death if ingested or inhaled in high concentrations.
Msds
This document provides a material safety data sheet for Repsol Telex E-68 lubricant oil. It summarizes the product identification and composition, hazards, safe handling and storage procedures, toxicological information, and disposal considerations for the product. The product is an additized lubricating oil that is a complex mixture of hydrocarbons. It can cause mild irritation upon contact with skin or eyes or if inhaled. Proper personal protective equipment should be worn and the product should be kept away from ignition sources and stored in a cool, well-ventilated area.
sterilisation-.pptx
Dr. Ibrahim presented on various sterilization methods including physical agents like heat, radiation, and filtration as well as chemical agents like alcohols, aldehydes, and gases. The most common sterilization methods used in laboratories are moist heat using an autoclave at 121°C for 15 minutes or 134°C for 3 minutes, dry heat using a hot air oven at 160-180°C, and chemical methods using ethylene oxide or beta propiolactone gases. Proper testing of sterilization efficacy includes using chemical, mechanical, and biological indicators to confirm sterilizing conditions have been met.
Sterilization And Disinfection
THE PRESENTATION INCLUDES STERILIZATION AND DISINFECTION TECHNIQUES WITH DESCRIPTION OF CENTRAL STERILE SUPPLY DEPARTMENT (CSSD) .
Similar to Methyl Iscoyanate (20)
Sterilization and disinfection for lab technicians.pdf
Sterilization and disinfection for lab technicians.pdf
Sodium Laureth Sulfate Manufacturers - Prakash Chemicals International
Sodium Laureth Sulfate Manufacturers - Prakash Chemicals International
Recently uploaded
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
Do you have abnormal smell after periods? It may be vaginitis. Do not worry, herbal medicine Fuyan Pill can help you get a cure.
Osteoporosis - Definition , Evaluation and Management .pdf
Osteoporosis is an increasing cause of morbidity among the elderly.
In this document , a brief outline of osteoporosis is given , including the risk factors of osteoporosis fractures , the indications for testing bone mineral density and the management of osteoporosis
Best Ayurvedic medicine for Gas and Indigestion
Here is the updated list of Top Best Ayurvedic medicine for Gas and Indigestion and those are Gas-O-Go Syp for Dyspepsia | Lavizyme Syrup for Acidity | Yumzyme Hepatoprotective Capsules etc
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
In some case, your chronic prostatitis may be related to over-masturbation. Generally, natural medicine Diuretic and Anti-inflammatory Pill can help mee get a cure.
The Best Ayurvedic Antacid Tablets in India
Treat the symptoms of indigestion, heartburn and stomach reflux with the 10 Best Ayurvedic Antacid Tablets in India.
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.Part II - Body Grief: Losing parts of ourselves and our identity before, duri...
Learn about body grief and ways to cope with it. We will also explore methods to heal from this challenging experience.
Top Effective Soaps for Fungal Skin Infections in India
Swisschem Dermacare has mentioned the List of The Best Antifungal Soap In India 2022. All of these soaps are trusted by various Dermatology Experts.
Adhd Medication Shortage Uk - trinexpharmacy.com
The UK is currently facing a Adhd Medication Shortage Uk, which has left many patients and their families grappling with uncertainty and frustration. ADHD, or Attention Deficit Hyperactivity Disorder, is a chronic condition that requires consistent medication to manage effectively. This shortage has highlighted the critical role these medications play in the daily lives of those affected by ADHD. Contact : +1 (747) 209 – 3649 E-mail : sales@trinexpharmacy.com
Journal Article Review on Rasamanikya
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
Top-Vitamin-Supplement-Brands-in-India List
Swisschem Dermacare provides the Top 10 Vitamin Supplement Brands in India. To know more about us give us call at our official number
Recently uploaded (20)
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
Osteoporosis - Definition , Evaluation and Management .pdf
Osteoporosis - Definition , Evaluation and Management .pdf
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
Part II - Body Grief: Losing parts of ourselves and our identity before, duri...
Part II - Body Grief: Losing parts of ourselves and our identity before, duri...
Tests for analysis of different pharmaceutical.pptx
Tests for analysis of different pharmaceutical.pptx
Top Effective Soaps for Fungal Skin Infections in India
Top Effective Soaps for Fungal Skin Infections in India
Ear and its clinical correlations By Dr. Rabia Inam Gandapore.pptx
Ear and its clinical correlations By Dr. Rabia Inam Gandapore.pptx
Methyl Iscoyanate
- 13. Building Industry • Sandwich panels • Pre-insulated pipes • Moulded or cut 1/2 pipe sectionals • Spray foam • Rigid slabs • Supports for manufacture of lightweight concrete and pre-fabricated walls / slabs Thermal Insulation For Food Industry • Refrigerated show cases • Domestic and commercial refrigerators & deep freeze chests • Insulation of fishing vessel hull & storage areas • Ice boxes for commercial and domestic purposes • Refrigerated containers • Refrigerated trucks / transport
- 14. Thermal Insulation For Hot / Cold Purposes • Hot water heater tanks • Insulated drink and food containers • Temperature controlled rooms / vessels • Pipelines / valves Buoyancy & Void Filling • Buoys • Pontoons • Filling of voids to prevent pests and vermin Other Applications • Air filter rims