Mayur Savale is seeking a position that allows him to utilize his skills and contribute to personal and professional growth. He has over 5 years of experience as a Production Engineer at Abhilasha Tex-Chem pvt. ltd., where he has led initiatives to improve product quality, reduce costs and environmental impact. Educationally, he holds a B.E. in Chemical Engineering and conducted a final year project on alternative water treatment using hydrodynamic cavitation. He is pursuing additional process engineering training involving simulation software.
Indofab Aerators are among the most efficient slow speed aerators. The simple mechanical structure consisting of motor, gearbox, lantern support, shaft and Impeller allows easy
operation.
Specially developed design criteria for MEP consultants & Architects to size & design ventilation system. These criteria when followed with Chemtronics ECO odour destruction system, gives the best results. Use PROSOFT software to select the most optimum model. Also technical specifications, tender BOQ & flow diagrams are available.
After Carmel Plaza Dental experienced the benefits of Nu Flow’s pipe rehabilitation technology on a 1/2” copper potable water system, there was no hesitation in calling them back for another project.
Indofab Aerators are among the most efficient slow speed aerators. The simple mechanical structure consisting of motor, gearbox, lantern support, shaft and Impeller allows easy
operation.
Specially developed design criteria for MEP consultants & Architects to size & design ventilation system. These criteria when followed with Chemtronics ECO odour destruction system, gives the best results. Use PROSOFT software to select the most optimum model. Also technical specifications, tender BOQ & flow diagrams are available.
After Carmel Plaza Dental experienced the benefits of Nu Flow’s pipe rehabilitation technology on a 1/2” copper potable water system, there was no hesitation in calling them back for another project.
GREEN STP AD+ IS Self Sustained, eco friendly natural process for all types of sewage treatment & reuse.
Main features of Green STP AD + are:
Decentralised, Low in sludge production, operators are not required, energy consumption is less than 50 % of conventional treatment, sludge handling is once in year. low in maintenance. generally built underground, saving lot of space.
A.T.E HUBER Envirotech's packaged sewage treatment plant is a self-contained 'plug & play' system that not only requires virtually no civil work and is low maintenance, but also consumes 30% less power, enhances the quality of treated water, and helps in de-nitrification.
iFluids Lean Six Sigma Case Study oil & gasJohn Kingsley
iFluids Lean Six Sigma Case Study oil & gas
Lean Six Sigma Applications in Oil and Gas Industry: Case Studies
Management Consulting Services
Lean Management Services
Framework to Implement Six Sigma Methodology to Oil and Gas
India Oman Qatar Malaysia Singapore
Twin Process Filtration BV located Newtonstraat 9, Tiel, In The Netherlands was the former European branch of the US company Sparkler Filters, before it was aqcuired by Twin Filter in Zaandam, The Netherlands. End 2010, Twin Filter activities were sold to the private aqcuity firm The Sterling Group. They sold off all the activities later on to Parker.
This case story was equipment sold in ~2001 under the Sparkler brand, but was showcased here as a Twin Process Filtration reference.
Material handling is a complex part of any industrial biotechnology process. Take a look at the following guidelines to help identify the right pathway for technology selection.
GREEN STP AD+ IS Self Sustained, eco friendly natural process for all types of sewage treatment & reuse.
Main features of Green STP AD + are:
Decentralised, Low in sludge production, operators are not required, energy consumption is less than 50 % of conventional treatment, sludge handling is once in year. low in maintenance. generally built underground, saving lot of space.
A.T.E HUBER Envirotech's packaged sewage treatment plant is a self-contained 'plug & play' system that not only requires virtually no civil work and is low maintenance, but also consumes 30% less power, enhances the quality of treated water, and helps in de-nitrification.
iFluids Lean Six Sigma Case Study oil & gasJohn Kingsley
iFluids Lean Six Sigma Case Study oil & gas
Lean Six Sigma Applications in Oil and Gas Industry: Case Studies
Management Consulting Services
Lean Management Services
Framework to Implement Six Sigma Methodology to Oil and Gas
India Oman Qatar Malaysia Singapore
Twin Process Filtration BV located Newtonstraat 9, Tiel, In The Netherlands was the former European branch of the US company Sparkler Filters, before it was aqcuired by Twin Filter in Zaandam, The Netherlands. End 2010, Twin Filter activities were sold to the private aqcuity firm The Sterling Group. They sold off all the activities later on to Parker.
This case story was equipment sold in ~2001 under the Sparkler brand, but was showcased here as a Twin Process Filtration reference.
Material handling is a complex part of any industrial biotechnology process. Take a look at the following guidelines to help identify the right pathway for technology selection.
Successful projects documented to share my skills and experience.
Please reach out for agriculture or O&P -related projects involving electrical, mechanical, or design.
Thank you for taking the time to look.
the report on the effect of the biodegradable matter and the particulate matter in the effluent treatment plant for particulate industry. that is under the subject if the design engineering.
A.T.E. HUBER Envirotech brings comprehensive solutions for wastewater treatment, recycling and sludge management for industrial and municipal sectors.
The septic sludge treatment covered in this presentation is a modular system applicable to municipalities, mega-cities, industrial undertakings, business establishments, and housing estates.
To know more log on to www.atehuber.com.
1. MAYUR R SAVALE
OBJECTIVE:-
To work as a dynamic professional in an environment that would provide opportunity to utilize
my skills and strength. Where I would like to contribute my educational knowledge for both personal
and professional growth.
EXPERIENCE:-
(1) Abhilasha Tex-Chem pvt. ltd., Tarapur. (Aarti group)
Role: Production Engineer
Duration: From 20 Aug 2013 to till date.
Job profile:
Production management
Quality control
Safety in charge
Maintenance scheduling, maintain record of maintenance done on equipment in plant
Work on SOP for all operations in plant
SCADA system installation
Achievements:
Make changes to control the HCl fumes emission, firstly caustic solution is circulating to
neutralize the fume. Instead of caustic solution I replace it by water. This benefit us to stop
caustic handling, cost reduced, acidic water produced recycle to the ETP.
Used recycle water for the pusher centrifuge to minimize fresh water consumption partly
solve the excess effluent generation.
For the quality of product
Change in process For improve the product quality slow down the recovery which help to
improve quality, crystal size improve, drying time minimize due to less moisture content
and also less pressure build up in scrubber.
Final year engineering project
1) Installed in ETP plant
2) Successfully trial run of 6KL batch complete
3) Results are as desired CaCl2 concentration drop from 19.75 to 7.8%. Now working to
decrease concentration below 1% in influent.
4) Scale up of system to treat 40KL per Day in progress.
Recently working on:
1) Upgradation of above system to reduce CaCl2 to1%
2) Used flash steam from plant condensate to melt PNCB to melt which used in process. Flash
steam replaces boiler steam which minimize on boiler to supply of steam.
3) Project of ETP modification capital investment of about 50lac.
2. EDUCATIONAL DETAILS:-
B.E. Chemical 2012-2013 75.06%
Finolex Academy of Management & Technology, Ratnagiri.Mumbai
FINAL YEAR PROJECT:-
A final year project on “Cooling Water Treatment by Hydrodynamic Cavitation”
Project Synopsis:
During the chemical treatment of the water Formation of scale, high pH of the water, problem of
corrosion resulted
Hydrodynamic cavitation is alternative to the chemical treatment. In this technique water is pass at
the certain flow rate through constriction device due to this pressure is reduced at the upstream
velocity increases and air bubbles are form and at downstream pressure recovered bubbles are
collapse
During these CaCO3 deposit which nonstick in nature ,not adhere to wall of pipes, vessels
This technique is efficient and effective then chemical treatment to treat the water
Role: Team Member
Referred about 25-30 papers related to this topics
Experimental setups used in that papers is 5 HP capacity motor, but we used 0.5 HP pump
Design calculation done by me by referring fluid mechanics books and papers
During the run of project face the problem of air leakage through pipe joints, I FOUND solution that
is conventional method of pipe connection
Solved the problem of gasket by preparing it from waste tire rubber by cutting it into the size of the
flange and placing in between flange
CURRICULAR ACTIVITIES:-
Behavior based safety training arranged by aarti industries
Industrial Training One month at Aarti industries, Anisiden Division, Sarigam, Gujarat.
Aspen workshop at IIT, Mumbai.
Pursuing process engineering course with xyntech solution, Included process simulation by
CHEMCAD, UNISIM, HYSIS Software, Sizing of line, equipment etc.
PERSONAL DETAILS:-
Date of Birth:-21/01/1992
Nationality:-Indian
Contact:-+918097544621, +919624187421
E-mail:- mayursavale1992@gmail.com
Residence address : B-202, Nilkamal App.,
Bhilad (w),
Ta.- Umbergaon, Dist-Valsad
Guj-396105