Mat_6th_ud1_units of measurement
โขDownload as ODP, PDFโข
1 likeโข489 views
This document discusses different units of measurement for length and mass. It covers standard units like meters, centimeters, grams and kilograms. It also explains how to convert between different units of length and mass, such as converting centimeters to meters or kilograms to grams. The document is intended to teach 6th grade geometry students about fundamental units of measurement used in science.
Report
Share
Report
Share
Recommended
Range of Motion Study
The document presents a hypothesis that the range of motion (ROM) of synovial joints can be predicted by subtracting the concave arc from the convex arc of the articular surfaces. The authors tested this hypothesis on 21 joints from cadavers by measuring the actual ROM and comparing it to the predicted ROM calculated from the articular surface dimensions. They found a moderate correlation of r=0.77 between the measured and predicted ROM, supporting the hypothesis with some limitations.
Correlation between conventional clinical tests and a new movement assessment...
Correlation between conventional clinical tests and a new movement assessment battery - Bachelor thesis (poster)
Despite the complexity of movements performed in sports, physical examination is today done by conventional tests that evaluate joints and muscles individually (e.g. Smith press test, Figure1). Our study used a new movement assessment battery of 20 reach tests, which incorporates the complexity and diversity of natural human movements, taking into consideration that joints are interdependent in a movement and that the planes and sequences of a movement change during its performance. The purpose of this study was to determine whether or not there is a correlation between conventional mobility tests and the new assessment battery.
NAASO 2007 Abstract 1
This study compared two equations, the Mifflin-St. Jeor (MSJ) equation and the de Luis equation, for predicting resting energy expenditure (REE) in class III obese individuals against measurements from indirect calorimetry. The study found that while both equations were correlated with measured REE, only the MSJ equation was significantly different. The de Luis equation may therefore be more accurate for predicting REE in class III obese individuals when indirect calorimetry is not available. The study measured height, weight, and waist circumference in 40 class III obese subjects to calculate predicted REE using the two equations and compare to REE measured via indirect calorimetry.
Fraction and lenght measurement
The document lists various length measurements including the length of a pencil being 10 cm, the length of a rubber being 4 cm, a meter being 100 cm, and the length of the front of a school being 52 m. It also provides the length of a car as 4 m, 1 km being 1000 m, 5 km being 5000 m, the length of an ant as 7 mm, the length of a clip as 18 mm, 1 m being 1000 mm, and 3 cm being 30 mm.
Applied 20S January 14, 2009
The document discusses converting between imperial and metric units of measurement. It provides examples of which units to use to measure lengths and heights of various objects. Tables show conversions between units like inches to centimeters, feet to meters, and miles to kilometers. The document also includes practice problems converting between units and performing calculations with mixed units.
Using the Marketing Measuring Tape
The document discusses the importance of measuring marketing effectiveness and provides examples of how to measure the effectiveness of various marketing channels, including mass media, social media, web, direct mail, and others. It notes that only 50% of marketers formally analyze data to measure return on investment and provides reasons why some marketers may not measure effectiveness. It also gives tips on identifying key performance indicators and examples of calculating marketing return on investment for different channels.
Measurement Intro
This document discusses different measurement systems and units that were used historically and currently. It explains that early humans measured using body parts like arms, hands, fingers, and fathoms (the length of a person's outstretched arms). It introduces the metric and imperial systems as the two primary systems used today. The document asks the reader to practice estimating lengths and distances using both systems and to measure objects in their room using historical body-based units before the end of the day. It notes homework questions and informs the reader they will need a ruler with both metric and imperial scales going forward in the unit.
Recommended
Range of Motion Study
The document presents a hypothesis that the range of motion (ROM) of synovial joints can be predicted by subtracting the concave arc from the convex arc of the articular surfaces. The authors tested this hypothesis on 21 joints from cadavers by measuring the actual ROM and comparing it to the predicted ROM calculated from the articular surface dimensions. They found a moderate correlation of r=0.77 between the measured and predicted ROM, supporting the hypothesis with some limitations.
Correlation between conventional clinical tests and a new movement assessment...
Correlation between conventional clinical tests and a new movement assessment battery - Bachelor thesis (poster)
Despite the complexity of movements performed in sports, physical examination is today done by conventional tests that evaluate joints and muscles individually (e.g. Smith press test, Figure1). Our study used a new movement assessment battery of 20 reach tests, which incorporates the complexity and diversity of natural human movements, taking into consideration that joints are interdependent in a movement and that the planes and sequences of a movement change during its performance. The purpose of this study was to determine whether or not there is a correlation between conventional mobility tests and the new assessment battery.
NAASO 2007 Abstract 1
This study compared two equations, the Mifflin-St. Jeor (MSJ) equation and the de Luis equation, for predicting resting energy expenditure (REE) in class III obese individuals against measurements from indirect calorimetry. The study found that while both equations were correlated with measured REE, only the MSJ equation was significantly different. The de Luis equation may therefore be more accurate for predicting REE in class III obese individuals when indirect calorimetry is not available. The study measured height, weight, and waist circumference in 40 class III obese subjects to calculate predicted REE using the two equations and compare to REE measured via indirect calorimetry.
Fraction and lenght measurement
The document lists various length measurements including the length of a pencil being 10 cm, the length of a rubber being 4 cm, a meter being 100 cm, and the length of the front of a school being 52 m. It also provides the length of a car as 4 m, 1 km being 1000 m, 5 km being 5000 m, the length of an ant as 7 mm, the length of a clip as 18 mm, 1 m being 1000 mm, and 3 cm being 30 mm.
Applied 20S January 14, 2009
The document discusses converting between imperial and metric units of measurement. It provides examples of which units to use to measure lengths and heights of various objects. Tables show conversions between units like inches to centimeters, feet to meters, and miles to kilometers. The document also includes practice problems converting between units and performing calculations with mixed units.
Using the Marketing Measuring Tape
The document discusses the importance of measuring marketing effectiveness and provides examples of how to measure the effectiveness of various marketing channels, including mass media, social media, web, direct mail, and others. It notes that only 50% of marketers formally analyze data to measure return on investment and provides reasons why some marketers may not measure effectiveness. It also gives tips on identifying key performance indicators and examples of calculating marketing return on investment for different channels.
Measurement Intro
This document discusses different measurement systems and units that were used historically and currently. It explains that early humans measured using body parts like arms, hands, fingers, and fathoms (the length of a person's outstretched arms). It introduces the metric and imperial systems as the two primary systems used today. The document asks the reader to practice estimating lengths and distances using both systems and to measure objects in their room using historical body-based units before the end of the day. It notes homework questions and informs the reader they will need a ruler with both metric and imperial scales going forward in the unit.
Saint patricks_picture dictionary
This document instructs the reader to write the name of important words related to St. Patrick's Day and then color in pictures, looking up on the internet which colors would be most suitable for each picture.
St. patricks_crosword
St. Patrick's Day is celebrated in March in Ireland, where green, white, and orange colors and shamrocks are symbols used. The holiday commemorates St. Patrick, a Christian missionary who lived in the 4th century and introduced Christianity to Ireland.
Saint patricks_reading comprhension
St. Patrick's Day is a celebration of Irish culture that takes place annually on March 17th. It honors St. Patrick, the patron saint of Ireland, who introduced Christianity in the 5th century. The holiday has become popular in the United States due to many Americans having Irish ancestry. Common symbols of St. Patrick's Day include wearing green clothing and shamrocks, eating Irish foods like corned beef and cabbage, and believing leprechauns bring good luck.
St patricks day pack
St. Patrick's Day is celebrated on March 17th to honor St. Patrick, the patron saint of Ireland. It is popularly celebrated in the United States with people wearing green, eating corned beef and cabbage, and recognizing symbols like shamrocks and leprechauns. St. Patrick brought Christianity to Ireland in the fifth century, which is why he is famous and the reason for the holiday.
Our kitchen and us
"Our kitchen and us" es un boceto de un proyecto e-Twinning creado a raรญz de el curso "Proyecte e-Twinning".
Cooking pancakes with Sarah
The document provides a recipe for making pancakes with Sarah. It lists the ingredients needed as flour, baking powder, salt, sugar, milk, eggs and butter. It then outlines the steps to prepare the ingredients, cook the pancakes in a pan with butter, and enjoy eating the finished pancakes with various toppings.
Mat_3rd_UD4_3D Shapes
This 3rd grade math unit covers 3D shapes including prisms, pyramids, and curved 3D shapes. Prisms are defined and their types are listed, with the cube identified as a special prism with equal square faces and no bases. Pyramids are also introduced and their types noted. Curved 3D shapes are the final topic covered in the unit.
Mat _6th_UD4_3D Shapes
The document discusses 3D shapes, their characteristics, parts, types, and how to represent them visually with nets. It defines 3D shapes as solid objects with three dimensions of height, width, and length that can be found in the real world. The main types covered are prisms, pyramids, and polyhedrons, with prisms having two equal bases and pyramids having one base, and both having flat faces that meet at vertices. Curved 3D shapes are also mentioned. Nets are described as a way to represent how to build a 3D shape by folding and gluing a 2D template.
Mat_5th_UD5_The plane figures' areas
This document discusses the areas of different plane figures including squares, rectangles, rhomboids, triangles, trapezoids, rhombuses, regular polygons, and circles. It provides information on calculating the areas of these basic shapes through formulas using measurements of their sides or radii.
Plat_3ri4rt_ud6_tony cragg_artwork
The document provides information about the artist Tony Cragg and his collage and sculpture works. It asks questions about identifying features of Cragg's artwork, such as which figure has the longest legs or how many bottles are in one piece. It also includes a link to a video where Tony Cragg explains his own artmaking process and sculptures.
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Mat_4rt_UD4_Plane figures
This document provides definitions and information about plane figures and polygons for 4th grade math. It defines polygons as closed polygonal lines with an interior, and lists the most common polygons as triangles and quadrilaterals. It explains that polygons are classified by the number of sides, and defines key terms like diagonal, perimeter, and types of triangles and quadrilaterals. The document also covers circles, their parts, and how to use a compass to draw circles.
Mat 5th_UD4_3D shapes
This document discusses 3D shapes, including their key characteristics of having three dimensions of height, width, and length. It describes the main parts of 3D shapes as prisms, which have two equal polygon bases and parallelogram faces, and pyramids, which have one polygon base and triangular faces meeting at a common vertex. The document also mentions other types of 3D shapes like polyhedrons with regular polygon faces and curved 3D shapes, and how nets can be used to form 3D shapes by folding and gluing.
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Mat_5th_UD3_Angles
This document defines angles and describes how to measure, construct, classify, and bisect angles. It contains the following key points:
1. An angle is the amount of turn between two lines that meet at a common endpoint called the vertex. Angles are measured in degrees using a protractor.
2. To construct a 45 degree angle, mark the 45 degree mark on a protractor and draw a line from the vertex to this mark.
3. There are different types of angles including complete angles of 360 degrees and relationships between consecutive, adjacent, and inverse angles.
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
More Related Content
More from TRMaria
Saint patricks_picture dictionary
This document instructs the reader to write the name of important words related to St. Patrick's Day and then color in pictures, looking up on the internet which colors would be most suitable for each picture.
St. patricks_crosword
St. Patrick's Day is celebrated in March in Ireland, where green, white, and orange colors and shamrocks are symbols used. The holiday commemorates St. Patrick, a Christian missionary who lived in the 4th century and introduced Christianity to Ireland.
Saint patricks_reading comprhension
St. Patrick's Day is a celebration of Irish culture that takes place annually on March 17th. It honors St. Patrick, the patron saint of Ireland, who introduced Christianity in the 5th century. The holiday has become popular in the United States due to many Americans having Irish ancestry. Common symbols of St. Patrick's Day include wearing green clothing and shamrocks, eating Irish foods like corned beef and cabbage, and believing leprechauns bring good luck.
St patricks day pack
St. Patrick's Day is celebrated on March 17th to honor St. Patrick, the patron saint of Ireland. It is popularly celebrated in the United States with people wearing green, eating corned beef and cabbage, and recognizing symbols like shamrocks and leprechauns. St. Patrick brought Christianity to Ireland in the fifth century, which is why he is famous and the reason for the holiday.
Our kitchen and us
"Our kitchen and us" es un boceto de un proyecto e-Twinning creado a raรญz de el curso "Proyecte e-Twinning".
Cooking pancakes with Sarah
The document provides a recipe for making pancakes with Sarah. It lists the ingredients needed as flour, baking powder, salt, sugar, milk, eggs and butter. It then outlines the steps to prepare the ingredients, cook the pancakes in a pan with butter, and enjoy eating the finished pancakes with various toppings.
Mat_3rd_UD4_3D Shapes
This 3rd grade math unit covers 3D shapes including prisms, pyramids, and curved 3D shapes. Prisms are defined and their types are listed, with the cube identified as a special prism with equal square faces and no bases. Pyramids are also introduced and their types noted. Curved 3D shapes are the final topic covered in the unit.
Mat _6th_UD4_3D Shapes
The document discusses 3D shapes, their characteristics, parts, types, and how to represent them visually with nets. It defines 3D shapes as solid objects with three dimensions of height, width, and length that can be found in the real world. The main types covered are prisms, pyramids, and polyhedrons, with prisms having two equal bases and pyramids having one base, and both having flat faces that meet at vertices. Curved 3D shapes are also mentioned. Nets are described as a way to represent how to build a 3D shape by folding and gluing a 2D template.
Mat_5th_UD5_The plane figures' areas
This document discusses the areas of different plane figures including squares, rectangles, rhomboids, triangles, trapezoids, rhombuses, regular polygons, and circles. It provides information on calculating the areas of these basic shapes through formulas using measurements of their sides or radii.
Plat_3ri4rt_ud6_tony cragg_artwork
The document provides information about the artist Tony Cragg and his collage and sculpture works. It asks questions about identifying features of Cragg's artwork, such as which figure has the longest legs or how many bottles are in one piece. It also includes a link to a video where Tony Cragg explains his own artmaking process and sculptures.
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Plat_3ri4rt_ud6_tony cragg_presentation
Mat_4rt_UD4_Plane figures
This document provides definitions and information about plane figures and polygons for 4th grade math. It defines polygons as closed polygonal lines with an interior, and lists the most common polygons as triangles and quadrilaterals. It explains that polygons are classified by the number of sides, and defines key terms like diagonal, perimeter, and types of triangles and quadrilaterals. The document also covers circles, their parts, and how to use a compass to draw circles.
Mat 5th_UD4_3D shapes
This document discusses 3D shapes, including their key characteristics of having three dimensions of height, width, and length. It describes the main parts of 3D shapes as prisms, which have two equal polygon bases and parallelogram faces, and pyramids, which have one polygon base and triangular faces meeting at a common vertex. The document also mentions other types of 3D shapes like polyhedrons with regular polygon faces and curved 3D shapes, and how nets can be used to form 3D shapes by folding and gluing.
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Mat_6th_ud3_the plane figures and their areas
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Plast_3ri4rt_UD5_Agatha Ruiz de la Prada
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Arts & Crafts_5th and 6th_Pablo picasso
Mat_5th_UD3_Angles
This document defines angles and describes how to measure, construct, classify, and bisect angles. It contains the following key points:
1. An angle is the amount of turn between two lines that meet at a common endpoint called the vertex. Angles are measured in degrees using a protractor.
2. To construct a 45 degree angle, mark the 45 degree mark on a protractor and draw a line from the vertex to this mark.
3. There are different types of angles including complete angles of 360 degrees and relationships between consecutive, adjacent, and inverse angles.
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
Mat_3r_UD3_Plane figures
More from TRMaria (20)
Recently uploaded
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!ย
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analyticsโ feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdย
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Benner "Expanding Pathways to Publishing Careers"
Benner "Expanding Pathways to Publishing Careers"National Information Standards Organization (NISO)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
โ What is event processing in MuleSoft?
โ Types of event processing models in Mule 4
โ Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Recently uploaded (20)
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
ย
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
ย
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
ย
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
ย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
ย
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
ย
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
ย
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
ย
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ย
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
ย
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
ย
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
ย
Mat_6th_ud1_units of measurement
- 1. UNIT 1 UNITS OF MEASUREMENT by Maria Adrover CEIP CALONGE Geometry 6th _ Unit 1_Units of Measurement
- 2. UNITS OF LENGHT Geometry 6th _ Unit 1_Units of Measurement
- 3. CONVERTING UNITS OF LENGHT Geometry 6th _ Unit 1_Units of Measurement
- 4. UNITS OF MASS Geometry 6th _ Unit 1_Units of Measurement
- 5. CONVERTING UNITS OF MASS Geometry 6th _ Unit 1_Units of Measurement
- 6. CONVERTING UNITS OF MASS Geometry 6th _ Unit 1_Units of Measurement