Very Narrow Aisle Truck which is very useful in modern warehouses where high reach and space saving is required. German made VNA Truck, One of the Unique manufacturers who are focusing only on products of VNA application.

1. Important Notes about
Global Leader*
in
Very Narrow Aisle
By
David Gnana Durai.D
Mob: 8098 55 44 99
pishondavid@gmail.com

2. From German to the world
 Founded as Hermann Röhrs
Company in 1920
 Performance Fork lifts for Very
Narrow Aisle since 1975
• Manufacturing plant in the
Lüneburger Heide

3. Here is our Strength
 Innovation
Continuous Innovation in
performance, ergonomics and
operational cost and also new
Product Development
 Individuality
Design and construct solutions
based on proven technologies for
specialized vehicle designs
• Reliability
Proven design principles
Zero compromises made at
manufacturing
Since 1997 with a DIN EN ISO 9001
standards

4. Here we are crafting your vehicle
Magaziner Lager- und Fördertechnik GmbH
Hützeler Str. 22-24
29646 Bispingen

5. Here We are now – Mile stone
 5000 + VNA
Our commitment to partner with our
customers made us to cross this figure
 Truly Multinational
50% of Products Sold abroad
20% of Products outside Europedesigns

6. Above the Clouds
 It seems that the EK 1500 XL lift
the load above the clouds. In
fact, this application for which
the truck was built is extremely.
This is a cold store application at
minus 25 ° C, two pallets deep
(double-depth stacking) and up
to 17.2 m lift height. Only the EK
1500 XL with extremely rigid XL
duplex mast (closed height: 8520
mm) and chassis and swivel mast
components from EK 2000, this
is possible.

7. • Standing behind the experience, our unparalleled
patented SGO design and construction principles,
ensuring the highest degree of vehicle stability.
Patented Mast

8. The EK-Series generously exceeds the DIN EN ISO 3691 a
regulation for the maximum allowable degree of vehicle
vertical tilt..
A smooth travel performance coupled with the torsion
resistant mast give the operator the feeling of a safe and
secure environment.
Engineering performance with lighter construction weights for
the cabin and mast offer greater strength to allow for
additional load capacity.
Optimum weight distribution and overall low center of
gravity.As a specific engineering result, the vehicle’s center of
gravity is low to the ground enhancing the inherent stability.
Safety Beyond ISO

9. • Exceptional visibility afforded the operator, provides an
unhindered view of the load and working aisle, to ensure
safe handling.
• Clearview mast design
• Rounded chassis contour
• Low support and guide channel construction of the turret
fork load handling device
• Large view windows in the front cabin wall
Visibility and Maneuverability

10. Console with Ball Handle Bar
The easy to grab thumb movement handle supports
standing operation while intuitive finger touch selects the
various control functions. This console option is considered
user friendly and is fitted with redundant control selection
capability and optical hand position sensors.
Console with Joystick Controls or Multifunction Control
Handle
• This classic option is controlled by displacement of the
joystick handle – arm movement. The 2-hand control
becomes active by slightly depressing the handle. The
Multifunction Control Handle can also provide the
redundant control selection in the handle.
Ergonomics – Extreme comfort

11. • The EK-Series offers the 5th generation ~AC motor
controllers.
• These vehicles perform with exceptional acceleration,
while obtaining travel and lift speeds up to 7.5 mph (12
km/h) / 110 fpm (0,56 m/s) respectively, all with a 40%
energy reduction due to heat loss.
• These speeds are not independent of one another,
diagonal travel enhances the throughput to compete
ASRS cycle times.
• All EK models, from the smallest EK 1100 to the heavy
duty EK 2000 offer this low maintenance electronic
advantage..
Optimum ~AC control configuration

12. • Rail options available on the EK-Series broaden the
of mechanical rail guidance control.
• When engineering a narrow aisle system, floor topology
and make up may dictate rail guidance for greater
throughput (vehicle speeds). Standard rail systems
a 4 x 4 angle along each side of the aisle.
• Since the EK system automatically sets the steer wheel
straight upon aisle entry and then monitors the wheel
position
Reliable aisle guidance

13. • The EK-Series electronic system consists of a network of
two electronic interface boards and three performance
based controllers, hydraulic, travel, and steering all
communicating via CAN-bus technology.
• Due to this open system architecture a flexible
parameterization of all functions and a rapid replacement
or upgrade of modules are guaranteed.
• Various diagnostic methods are available to the service
technician:
• LED display – vehicle mounted
• CAN-Bus connection for diagnostic reader
• USB connection for laptops and notebooks
• GSM connection for remote diagnostics
Ease of Maintenance |
Modular Style

14. • The EK-Series motor compartment is clean (no carbon
dust from motor brushes) and conceptually laid out to
assist the technician
• Interface board and diagnostic at waist level, all around
access to the electronic and hydraulic system.
• Components can easily be exchanged if required. Even
the cabin interface board is accessible via the USB port
without having to remove it
Ease of Maintenance |
Modular Style

15. • Magaziner vehicles have proven their reliability in the
harshest and most critical applications.
• Robust vehicle construction that can be identified in the
countless details.
• Serious damages are avoided by motor compartment
protected by thick steel doors
massive protected load wheels
• Turret load handling device with large distance between
support bearings
Durablity| Raised New bench mark

16. • There may come a time when even the most reliable
vehicle needs some spare parts.
• Due to the modular approach in EK-Series electronic and
hydraulic system only the damaged component must be
replaced.
• Additionaly we assure that updates in components are
made rearward compatible.
• We achieve a low spare parts stock at our service
partners, easy mapping and a perfect availability at very
low maintenance costs.
• Landsky Engineers In India have proven record of on time
efficient After sales service and spares availablity
Service| Nerve system of “Landsky”

17. Happy for your Choice