2. •Know what Lockout/Tagout is
•Know why it’s used
•Know why it’s not okay to touch locks
Why am I getting this training?
2
4/5/2022
NEVER,
EVER,
remove a lock
or tag!
3. •Shuts down and removes all energy
•Moving parts, electricity, pressure, etc.
•Put a lock on it
•Put a tag on it
•Check machine is off
•Check no moving parts
•It’s now safe to work on the machine
What is Lockout/Tagout?
3
4/5/2022
4. •The lock stops someone accidentally
restarting machine
•Tags tell us who put the lock on, and why
But why use a lock and a tag?
4
4/5/2022
6. •It might cause an injury!
•The machine might cycle automatically
•It could be turned on by someone while
someone else was inside or working on a
part
•And many other scenarios…
LOTO makes sure these cannot happen
What if lock or tags are removed?
6
4/5/2022
7. •It’s a group lockout
•Each person has their own
lock
•Everyone has to remove
their own lock before
machine can be restarted
•This makes sure everyone
working on machine is safe
Why are there sometimes more than
one lock?
7
4/5/2022
8. •Talk to the person who put the lock on
•Check the LOTO Permit or Equipment
Specific LOTO Procedure
•Talk with your Supervisor
Need to know more?
8
4/5/2022
9. NO!
You have to go through the full
Lockout/Tagout Authorized Person Training
Talk with your supervisor about getting this
training if you need it
Can I use a lock now that I’ve been
through this training?
9
4/5/2022
10. You could be subject to
disciplinary action up to and
including termination
What if I remove someone’s lock or
tag?
10
4/5/2022