SlideShare a Scribd company logo
Shenzhen Zhongyi Optoelectronics Co.ltd
Email:sales@szledzy.com
Mob: +86 13544082677
Fixed Installation Series
User Manual
CATALOGUES
I.Safety information
 Don’t jam the air vents. Please install as the manufacturer’s instruction.
 Don’t install the product close to heat sources like radiators, heaters, stoves or
other equipments that can produce heat (including amplifiers).
 Don’t tread power and data lines; especially avoid squeezing plugs, outlets and
power/data lines led from equipments. Replace damaged power and data cables
immediately.
 Only the company designated accessories and fittings can be used.
 Please cut off the power or provide other applicable lightning protection in
thunders. Please cut off the power without using the product for a long time.
 Please put the distribution box close to the product in order to easily cut off the
main power if there is any problem.
 The product shall be installed and maintained by qualified technical service staff.
Please contact professional maintenance personnel to repair the product damaged
due to various reasons (such as the power or plug broken down, the equipment
failure or falling down).
 Use the product by combining with the manufacturer designated or equipment
accessory system or the peripheral equipment. Be sure to be careful to uplift,
move or transport the product, avoiding damage of product from falling down and
injury of people.
 Owing to improper operations, the product may give rise to electric shock, fire or
falling down and cause serious damage or death.
 The input voltage of the product is divided into:
AC 100-120V/110-220V/100-240V 50/60Hz in accordance with different areas.
 Please ensure to have cut off the master switch of input power of the whole
display when installing the product and wiring. Please be sure to have sound
grounding.
 Please not provide the product output power terminals for other equipments.
Please be careful to check if there is trouble in the power line and its joint and
terminal blocks before powering on.
 Prohibit using any damaged or bare power lines or power plugs.
 In order to reduce the shock hazard, please don’t dismantle the front cover (or rear
cover).
 Please provide at least 30cm space for the rear radiator to radiate.
 Please don’t directly place or paste any articles on the LED light.
 Please don’t use the product if the environment temperature is over 50℃.
 As the product will generate quantities of heat, please put the product far away
from inflammables and explosives. Ensure adequate ventilation during installing
for safe running of the product.
 In order to avoid causing fire due to the overloaded power cables, please properly
allocate the load of power cables according to this user manual or use cables
configured by the company.
 Pay attention to the hoisting load; please make hoisting installation in strict
accordance with the load limit.
 Please wear helmets during construction to avoid causing personal injury.
 Please fasten the seat belt when working high above the ground.
1
Warning:
Make sure to understand and follow all of the
manual’s safety information, important warnings
and notes.
II. Introduction N Series LED Screens Products
[I] Size of LED screen
2
[II] Product features and parameters
 This series is divided into Standard Indoor LED display, Outdoor screen and Offline Broadcast
Control Screen.
 Unique structural design, easy to install, easy to maintain, suitable for fixed installation.
 Outdoor screen passed flushing test successfully, with good waterproof effect.
 Ultra-thin, ultra-light cabinet design.
 According to the installation environment, there is a variety of optional cabinet size.
 Cabinet internal wiring neat appearance.
N series technical parameters
Dot spacing 4mm 5mm 5.208mm 6mm 7.62mm
Pixel composition SMD2020 SMD3528 SMD3528 SMD3528 SMD3528
Pixel density (/m2
) 62500 40000 36864 37850 17222
Applicable environment Indoor
Module dimensions (mm) 128*128 160*80 250*250 192*96 244*122
Module resolution 32*32 32*16 48*48 32*16 32*16
Cabinet dimensions (mm) 768*512 800*600 500*1000 960*768 975*732
Cabinet resolution 192*128 160*128 96*192 160*128 128*96
Scanning mode 1/16 1/8 1/8 1/8 1/8
Luminance (cd/m2
) ≥800 ≥2500 ≥2500 ≥2000 ≥1400
Grayscale (bit) ≥12
Refresh rate (Hz) ≥1000 ≥1000 ≥1000 ≥1000 ≥1000
Cabinet weight (Kg) 45±1Kg/m2
Power Consumption(W/m2
) ≤840 ≤840 ≤840 ≤800 ≤500
Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz
Viewing Angle H:140° V:140°
Temperature Range (℃) Storage:-40℃~+85℃;Operation:-30℃~+50℃
Operating Humidity 10-90% RH
Service Life 100,000H
MTBF 5000H
IP Rating Indoor IP31,OutdoorIP65
3
N series technical parameters
Dot spacing 8mm 10mm 12mm
Pixel composition SMD3528 SMD3528 DIP346 SMD3528 DIP346
Pixel density (/m2
) 15625 10000 6944
Applicable environment Indoor Indoor Outdoor Indoor Outdoor
4
Module dimensions (mm) 256*128 320*160 160*160 192*192 192*192
Module resolution 32*16 32*16 16*16 16*16 16*16
Cabinet dimensions (mm) 1024*768 960*640 800*640 1152*768 960*960
Cabinet resolution 128*96 96*64 80*64 96*64 80*80
Scanning mode 1/8 1/4 1/4 1/4 1/2
Luminance (cd/m2
) ≥1200 ≥1500 ≥6500 ≥1100 ≥6500
Grayscale (bit) ≥12
Refresh rate (Hz) ≥1000 ≥1000 ≥1000 ≥1000 ≥1000
Cabinet weight (Kg) Indoor 45±1Kg/m2
Outdoor 58±1Kg/m2
Power Consumption(W/m2
) ≤450 ≤600 ≤600 ≤450 ≤600
Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz
Viewing Angle SMD--H:140° V:140° DIP--H:120° V:90°
Temperature Range (℃) Storage:-40℃~+85℃;Operation:-30℃~+50℃
Operating Humidity 10-90% RH
Service Life 100,000H
MTBF 5000H
IP Rating Indoor IP31,OutdoorIP65
N series technical parameters
Dot spacing 16mm 20mm
Pixel composition DIP346 DIP346
Pixel density (/m2
) 3096 2500
Applicable environment Outdoor
5
Module dimensions (mm) 256*128 320*160
Module resolution 16*8 16*8
Cabinet dimensions (mm) 1024*768 1024*768
Cabinet resolution 64*48 64*40
Scanning mode Static Static
Luminance (cd/m2
) ≥6500 ≥6000
Grayscale (bit) ≥12
Refresh rate (Hz) ≥1000 ≥1000
Cabinet weight (Kg) 58±1Kg/m2
Power Consumption(W/m2
) ≤600 ≤570
Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz
Viewing Angle SMD--H:140° V:140° DIP--H:120° V:90°
Temperature Range ( )℃ Storage:-40℃~+85℃;Operation:-30℃~+50℃
Operating Humidity 10-90% RH
Service Life 100,000H
MTBF 5000H
IP Rating Indoor IP31,OutdoorIP65
6
[III] Introduction to accessories’functions
[IV] Cabinet
(1) Module
Hanging bar – Suspension for cabinet installation
Specification:
936mm(L)*110mm(W)*180mm(H)-one for one
1872mm(L)*110mm(W)*180mm(H)-one for two
Weight:10.2Kg 21Kg
Color:Black
Hanging beam U – haped connector – ixed the
connection between hanging beam.
Weight :510g
Color :Black
Square four-hole connector – Connect & fix each
cabinet.
Two-hole rectangle connect – Connect & fix each
cabinet.
Two-hole bent connector – Connect and lock cabinet
onto the tube.
Weight :355g 193g 455g
Color:Black
SMD LED
Signal interface
Module power supply
DIP LED
7
(2) Cabinet
Positioning pilar
Quickly align for cabinet installation
Signal & Power Output
Handle
Hold up the box for other operations
 Door Lock
Cabinet back cover protection lock
Side Lock
Connect to the adjacent cabinets
Mounting Screw Holes
A fixed connecting between the cabinets
 Signal & Power Input
 





8
III. Wire rod part
Name: LED main power line
Specifications: 3*2.5mm2 multiple copper cores (brown,
blue, kelly)
Length: 5m/10m/15m
Color: black
Name: main signal line of sending card to cabinet
Specifications:
 superoxide five, unshielded, cable core 24AWG
 superoxide five 8P with double-shielded single cable
of single core
 8 cables with multiple cores, superoxide five GB cable
Length: 5m/10m/15m
Color: black /grey
Name: cascading signal line between cabinets
Specifications: Both ends with NEUTRIK blue / yellow Air
plug (Top-bottom cascading)
Both ends with NEUTRIK blue / yellow Air plug (Left-right
cascading)
Length:350mm/500mm/800mm
Color:Black
Name: Cascading power line between cabinets (the
international standard - optional)
Specifications: Both ends with NEUTRIK blue / white Air
plug (Top-bottom cascading)
Both ends with NEUTRIK blue / white Air plug (Left-right
cascading)
Length:900mm/1300mm
Color:Black
Name: Cascading signal line between cabinets
Specifications: With air plugs at both ends plus crystal
head(top- bottom cascading)
With air plugs at both ends plus crystal head(left-right
cascading)
Length:350mm/500mm/800mm/900mm/1300mm
Color:Black/grey
Name: Modular cascading signal line
Specification:2*8P-2.54mm spacing
Length:100mm/120mm/150mm/200mm/300mm/500mm
Color:Gray
9
IV. LED installation
[I] Installation tools and accessories
M10*20mm Screw – Fix
hanging bar and U-shape
connector
M10*25mm screw – fixing the
cabinet for vertical and hoisting
installation
M10*65mm bolt – ixing the
cabinet for vertical installation
U-shaped shackle – Suspended
installation accessories
S8 internal hexagonal wrench –
used for tightening M10mm
screw
Cross screwdriver
Digital multimeter – used for
measuring circuit
Key – used to open or lock
cabinet back door
10
[II] Installation method
N series LED display is divided into two kinds of installation:vertical installation and hoisting installation
(1) Procedures of seated installation
 With 40mm * 40mm square tube steel make a
steel structure in accordance with the size of
cabinet .
 Put the positive direction of the cabinet on the
support rods of steel structures bottom.
 Use the two- holes and bend connector hitch the
steel tube, make sure the screw hole aim at the
mounting hole of the cabinet corner.
 With M10 * 25mm hex head screws through the
screw holes of mounting piece and fixed together
with the cabinet mounting holes.
Two-hole bent connector
M10*25mm SHCS
 When installing the second row cabinets, screw
out the positioning column of the top of following
cabinet, aiming at the bottom of the cabinet
positioning hole then insert. With connectors to
lock adjacent cabinets.
 The second cabinet next to the first box, fix
with
M10 * 25mm SHCS go through the square four-
hole connector ,and then locked.
 Connector Usage:
a, Use M10 * 25mm SHCS and two-hole bend connector to
install the cabinets on both sides of steel frame.
b, The two cabinets one the steel tube installed with M10 * 65mm
SHCS, four-hole connector, two-hole connector.

More Related Content

What's hot

Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Thorne & Derrick International
 
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Thorne & Derrick International
 
Servermax Cabinets 61 Data Sheet[1]
Servermax Cabinets 61 Data Sheet[1]Servermax Cabinets 61 Data Sheet[1]
Servermax Cabinets 61 Data Sheet[1]rahnev
 
Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Details 01Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Details 01Trevain Bechan
 
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Thorne & Derrick International
 
Fuse box roll forming machine
Fuse box roll forming machineFuse box roll forming machine
Fuse box roll forming machine
Metal Maker Engineer
 
Lynca Meats - Pork Factory - Meyerton - Sections
Lynca Meats - Pork Factory - Meyerton - SectionsLynca Meats - Pork Factory - Meyerton - Sections
Lynca Meats - Pork Factory - Meyerton - SectionsTrevain Bechan
 
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.comHộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
Beeteco
 
SEIFURI FABRICATE DE PARITET UCRAINA COMUNITATEA STATELOR INDEPENDENTE
SEIFURI  FABRICATE DE  PARITET UCRAINA COMUNITATEA STATELOR  INDEPENDENTESEIFURI  FABRICATE DE  PARITET UCRAINA COMUNITATEA STATELOR  INDEPENDENTE
SEIFURI FABRICATE DE PARITET UCRAINA COMUNITATEA STATELOR INDEPENDENTE
Mail Box Production
 
WT Henley ABC Distribution Boxes
WT Henley ABC Distribution BoxesWT Henley ABC Distribution Boxes
WT Henley ABC Distribution Boxes
Thorne & Derrick International
 

What's hot (10)

Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
 
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
 
Servermax Cabinets 61 Data Sheet[1]
Servermax Cabinets 61 Data Sheet[1]Servermax Cabinets 61 Data Sheet[1]
Servermax Cabinets 61 Data Sheet[1]
 
Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Details 01Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Details 01
 
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
 
Fuse box roll forming machine
Fuse box roll forming machineFuse box roll forming machine
Fuse box roll forming machine
 
Lynca Meats - Pork Factory - Meyerton - Sections
Lynca Meats - Pork Factory - Meyerton - SectionsLynca Meats - Pork Factory - Meyerton - Sections
Lynca Meats - Pork Factory - Meyerton - Sections
 
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.comHộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
Hộp nút nhấn, hộp điều khiển IDEC Control Box - beeteco.com
 
SEIFURI FABRICATE DE PARITET UCRAINA COMUNITATEA STATELOR INDEPENDENTE
SEIFURI  FABRICATE DE  PARITET UCRAINA COMUNITATEA STATELOR  INDEPENDENTESEIFURI  FABRICATE DE  PARITET UCRAINA COMUNITATEA STATELOR  INDEPENDENTE
SEIFURI FABRICATE DE PARITET UCRAINA COMUNITATEA STATELOR INDEPENDENTE
 
WT Henley ABC Distribution Boxes
WT Henley ABC Distribution BoxesWT Henley ABC Distribution Boxes
WT Henley ABC Distribution Boxes
 

Similar to Led display introduction

User manual for outdoor fixed installation led billboard display
User manual for outdoor fixed installation led billboard displayUser manual for outdoor fixed installation led billboard display
User manual for outdoor fixed installation led billboard display
Max Dan
 
Led perimeter screen +86 13544082677
Led perimeter screen +86 13544082677Led perimeter screen +86 13544082677
Led perimeter screen +86 13544082677
ssuserd30ca8
 
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERINGCatalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
Eddie Lee
 
Elematic cable protection - אלמטיק
Elematic cable protection - אלמטיקElematic cable protection - אלמטיק
Elematic cable protection - אלמטיק
gutman barzilai company
 
Control box-idec - www.haophuong.com
Control box-idec - www.haophuong.comControl box-idec - www.haophuong.com
Control box-idec - www.haophuong.com
CTY TNHH HẠO PHƯƠNG
 
Digital Watchdog DWC-V4567WTIR User Manual
Digital Watchdog DWC-V4567WTIR User ManualDigital Watchdog DWC-V4567WTIR User Manual
Digital Watchdog DWC-V4567WTIR User Manual
JMAC Supply
 
Digital Watchdog DWC-V4567WD User Manual
Digital Watchdog DWC-V4567WD User ManualDigital Watchdog DWC-V4567WD User Manual
Digital Watchdog DWC-V4567WD User Manual
JMAC Supply
 
MSAN Huawei T500 (MA5600T) Quick Installation Guide
MSAN Huawei T500 (MA5600T) Quick Installation GuideMSAN Huawei T500 (MA5600T) Quick Installation Guide
MSAN Huawei T500 (MA5600T) Quick Installation Guide
ibrahimnabil17
 
Innovations 2015
Innovations 2015Innovations 2015
Innovations 2015
Eeu SC
 
Manual Intercom - Fibaro
Manual Intercom - FibaroManual Intercom - Fibaro
Manual Intercom - Fibaro
Domotica daVinci
 
APMS-30-24 Datasheet
APMS-30-24 DatasheetAPMS-30-24 Datasheet
APMS-30-24 Datasheet
Jessica Yuan
 
APMS-100A1-24
APMS-100A1-24APMS-100A1-24
APMS-100A1-24
Jessica Yuan
 
APMS-320-24
APMS-320-24APMS-320-24
APMS-320-24
Jessica Yuan
 
Lighting.pdf
Lighting.pdfLighting.pdf
Lighting.pdf
BasharAlAli5
 
Rittal Aksesuvarları
Rittal AksesuvarlarıRittal Aksesuvarları
Rittal Aksesuvarları
erdinc klima
 
A2. IM9201A961-00.pdf
A2. IM9201A961-00.pdfA2. IM9201A961-00.pdf
A2. IM9201A961-00.pdf
NguyenHoangHaiChau1
 
APMS-100-24
APMS-100-24APMS-100-24
APMS-100-24
Jessica Yuan
 
Eltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
Eltherm ELKM-AG-N Heat Trace Cable - Spec SheetEltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
Eltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
Thorne & Derrick UK
 

Similar to Led display introduction (20)

User manual for outdoor fixed installation led billboard display
User manual for outdoor fixed installation led billboard displayUser manual for outdoor fixed installation led billboard display
User manual for outdoor fixed installation led billboard display
 
Led perimeter screen +86 13544082677
Led perimeter screen +86 13544082677Led perimeter screen +86 13544082677
Led perimeter screen +86 13544082677
 
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERINGCatalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
Catalog uv spot - solid jet poiting curing by ABLE INDUSTRIAL ENGINEERING
 
Elematic cable protection - אלמטיק
Elematic cable protection - אלמטיקElematic cable protection - אלמטיק
Elematic cable protection - אלמטיק
 
Connector Brochure
Connector BrochureConnector Brochure
Connector Brochure
 
Control box-idec - www.haophuong.com
Control box-idec - www.haophuong.comControl box-idec - www.haophuong.com
Control box-idec - www.haophuong.com
 
Digital Watchdog DWC-V4567WTIR User Manual
Digital Watchdog DWC-V4567WTIR User ManualDigital Watchdog DWC-V4567WTIR User Manual
Digital Watchdog DWC-V4567WTIR User Manual
 
Digital Watchdog DWC-V4567WD User Manual
Digital Watchdog DWC-V4567WD User ManualDigital Watchdog DWC-V4567WD User Manual
Digital Watchdog DWC-V4567WD User Manual
 
MSAN Huawei T500 (MA5600T) Quick Installation Guide
MSAN Huawei T500 (MA5600T) Quick Installation GuideMSAN Huawei T500 (MA5600T) Quick Installation Guide
MSAN Huawei T500 (MA5600T) Quick Installation Guide
 
Innovations 2015
Innovations 2015Innovations 2015
Innovations 2015
 
Manual Intercom - Fibaro
Manual Intercom - FibaroManual Intercom - Fibaro
Manual Intercom - Fibaro
 
APMS-30-24 Datasheet
APMS-30-24 DatasheetAPMS-30-24 Datasheet
APMS-30-24 Datasheet
 
APMS-100A1-24
APMS-100A1-24APMS-100A1-24
APMS-100A1-24
 
APMS-320-24
APMS-320-24APMS-320-24
APMS-320-24
 
Lighting.pdf
Lighting.pdfLighting.pdf
Lighting.pdf
 
Rittal Aksesuvarları
Rittal AksesuvarlarıRittal Aksesuvarları
Rittal Aksesuvarları
 
A2. IM9201A961-00.pdf
A2. IM9201A961-00.pdfA2. IM9201A961-00.pdf
A2. IM9201A961-00.pdf
 
Ddf digitala
Ddf digitala Ddf digitala
Ddf digitala
 
APMS-100-24
APMS-100-24APMS-100-24
APMS-100-24
 
Eltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
Eltherm ELKM-AG-N Heat Trace Cable - Spec SheetEltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
Eltherm ELKM-AG-N Heat Trace Cable - Spec Sheet
 

Recently uploaded

COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfCOLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
Kamal Acharya
 
Gen AI Study Jams _ For the GDSC Leads in India.pdf
Gen AI Study Jams _ For the GDSC Leads in India.pdfGen AI Study Jams _ For the GDSC Leads in India.pdf
Gen AI Study Jams _ For the GDSC Leads in India.pdf
gdsczhcet
 
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
Amil Baba Dawood bangali
 
WATER CRISIS and its solutions-pptx 1234
WATER CRISIS and its solutions-pptx 1234WATER CRISIS and its solutions-pptx 1234
WATER CRISIS and its solutions-pptx 1234
AafreenAbuthahir2
 
J.Yang, ICLR 2024, MLILAB, KAIST AI.pdf
J.Yang,  ICLR 2024, MLILAB, KAIST AI.pdfJ.Yang,  ICLR 2024, MLILAB, KAIST AI.pdf
J.Yang, ICLR 2024, MLILAB, KAIST AI.pdf
MLILAB
 
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Dr.Costas Sachpazis
 
HYDROPOWER - Hydroelectric power generation
HYDROPOWER - Hydroelectric power generationHYDROPOWER - Hydroelectric power generation
HYDROPOWER - Hydroelectric power generation
Robbie Edward Sayers
 
ethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.pptethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.ppt
Jayaprasanna4
 
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
AJAYKUMARPUND1
 
CME397 Surface Engineering- Professional Elective
CME397 Surface Engineering- Professional ElectiveCME397 Surface Engineering- Professional Elective
CME397 Surface Engineering- Professional Elective
karthi keyan
 
Student information management system project report ii.pdf
Student information management system project report ii.pdfStudent information management system project report ii.pdf
Student information management system project report ii.pdf
Kamal Acharya
 
The role of big data in decision making.
The role of big data in decision making.The role of big data in decision making.
The role of big data in decision making.
ankuprajapati0525
 
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdfAKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
SamSarthak3
 
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdfTop 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Teleport Manpower Consultant
 
DESIGN A COTTON SEED SEPARATION MACHINE.docx
DESIGN A COTTON SEED SEPARATION MACHINE.docxDESIGN A COTTON SEED SEPARATION MACHINE.docx
DESIGN A COTTON SEED SEPARATION MACHINE.docx
FluxPrime1
 
Railway Signalling Principles Edition 3.pdf
Railway Signalling Principles Edition 3.pdfRailway Signalling Principles Edition 3.pdf
Railway Signalling Principles Edition 3.pdf
TeeVichai
 
Automobile Management System Project Report.pdf
Automobile Management System Project Report.pdfAutomobile Management System Project Report.pdf
Automobile Management System Project Report.pdf
Kamal Acharya
 
Standard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - NeometrixStandard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - Neometrix
Neometrix_Engineering_Pvt_Ltd
 
Vaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdfVaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdf
Kamal Acharya
 
ASME IX(9) 2007 Full Version .pdf
ASME IX(9)  2007 Full Version       .pdfASME IX(9)  2007 Full Version       .pdf
ASME IX(9) 2007 Full Version .pdf
AhmedHussein950959
 

Recently uploaded (20)

COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfCOLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
 
Gen AI Study Jams _ For the GDSC Leads in India.pdf
Gen AI Study Jams _ For the GDSC Leads in India.pdfGen AI Study Jams _ For the GDSC Leads in India.pdf
Gen AI Study Jams _ For the GDSC Leads in India.pdf
 
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
 
WATER CRISIS and its solutions-pptx 1234
WATER CRISIS and its solutions-pptx 1234WATER CRISIS and its solutions-pptx 1234
WATER CRISIS and its solutions-pptx 1234
 
J.Yang, ICLR 2024, MLILAB, KAIST AI.pdf
J.Yang,  ICLR 2024, MLILAB, KAIST AI.pdfJ.Yang,  ICLR 2024, MLILAB, KAIST AI.pdf
J.Yang, ICLR 2024, MLILAB, KAIST AI.pdf
 
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
 
HYDROPOWER - Hydroelectric power generation
HYDROPOWER - Hydroelectric power generationHYDROPOWER - Hydroelectric power generation
HYDROPOWER - Hydroelectric power generation
 
ethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.pptethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.ppt
 
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
 
CME397 Surface Engineering- Professional Elective
CME397 Surface Engineering- Professional ElectiveCME397 Surface Engineering- Professional Elective
CME397 Surface Engineering- Professional Elective
 
Student information management system project report ii.pdf
Student information management system project report ii.pdfStudent information management system project report ii.pdf
Student information management system project report ii.pdf
 
The role of big data in decision making.
The role of big data in decision making.The role of big data in decision making.
The role of big data in decision making.
 
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdfAKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
 
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdfTop 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
 
DESIGN A COTTON SEED SEPARATION MACHINE.docx
DESIGN A COTTON SEED SEPARATION MACHINE.docxDESIGN A COTTON SEED SEPARATION MACHINE.docx
DESIGN A COTTON SEED SEPARATION MACHINE.docx
 
Railway Signalling Principles Edition 3.pdf
Railway Signalling Principles Edition 3.pdfRailway Signalling Principles Edition 3.pdf
Railway Signalling Principles Edition 3.pdf
 
Automobile Management System Project Report.pdf
Automobile Management System Project Report.pdfAutomobile Management System Project Report.pdf
Automobile Management System Project Report.pdf
 
Standard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - NeometrixStandard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - Neometrix
 
Vaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdfVaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdf
 
ASME IX(9) 2007 Full Version .pdf
ASME IX(9)  2007 Full Version       .pdfASME IX(9)  2007 Full Version       .pdf
ASME IX(9) 2007 Full Version .pdf
 

Led display introduction

  • 1. Shenzhen Zhongyi Optoelectronics Co.ltd Email:sales@szledzy.com Mob: +86 13544082677 Fixed Installation Series User Manual
  • 3. I.Safety information  Don’t jam the air vents. Please install as the manufacturer’s instruction.  Don’t install the product close to heat sources like radiators, heaters, stoves or other equipments that can produce heat (including amplifiers).  Don’t tread power and data lines; especially avoid squeezing plugs, outlets and power/data lines led from equipments. Replace damaged power and data cables immediately.  Only the company designated accessories and fittings can be used.  Please cut off the power or provide other applicable lightning protection in thunders. Please cut off the power without using the product for a long time.  Please put the distribution box close to the product in order to easily cut off the main power if there is any problem.  The product shall be installed and maintained by qualified technical service staff. Please contact professional maintenance personnel to repair the product damaged due to various reasons (such as the power or plug broken down, the equipment failure or falling down).  Use the product by combining with the manufacturer designated or equipment accessory system or the peripheral equipment. Be sure to be careful to uplift, move or transport the product, avoiding damage of product from falling down and injury of people.  Owing to improper operations, the product may give rise to electric shock, fire or falling down and cause serious damage or death.  The input voltage of the product is divided into: AC 100-120V/110-220V/100-240V 50/60Hz in accordance with different areas.  Please ensure to have cut off the master switch of input power of the whole display when installing the product and wiring. Please be sure to have sound grounding.  Please not provide the product output power terminals for other equipments. Please be careful to check if there is trouble in the power line and its joint and terminal blocks before powering on.  Prohibit using any damaged or bare power lines or power plugs.  In order to reduce the shock hazard, please don’t dismantle the front cover (or rear cover).  Please provide at least 30cm space for the rear radiator to radiate.  Please don’t directly place or paste any articles on the LED light.  Please don’t use the product if the environment temperature is over 50℃.  As the product will generate quantities of heat, please put the product far away from inflammables and explosives. Ensure adequate ventilation during installing for safe running of the product.  In order to avoid causing fire due to the overloaded power cables, please properly allocate the load of power cables according to this user manual or use cables configured by the company.  Pay attention to the hoisting load; please make hoisting installation in strict accordance with the load limit.  Please wear helmets during construction to avoid causing personal injury.  Please fasten the seat belt when working high above the ground. 1 Warning: Make sure to understand and follow all of the manual’s safety information, important warnings and notes.
  • 4. II. Introduction N Series LED Screens Products [I] Size of LED screen 2
  • 5. [II] Product features and parameters  This series is divided into Standard Indoor LED display, Outdoor screen and Offline Broadcast Control Screen.  Unique structural design, easy to install, easy to maintain, suitable for fixed installation.  Outdoor screen passed flushing test successfully, with good waterproof effect.  Ultra-thin, ultra-light cabinet design.  According to the installation environment, there is a variety of optional cabinet size.  Cabinet internal wiring neat appearance. N series technical parameters Dot spacing 4mm 5mm 5.208mm 6mm 7.62mm Pixel composition SMD2020 SMD3528 SMD3528 SMD3528 SMD3528 Pixel density (/m2 ) 62500 40000 36864 37850 17222 Applicable environment Indoor Module dimensions (mm) 128*128 160*80 250*250 192*96 244*122 Module resolution 32*32 32*16 48*48 32*16 32*16 Cabinet dimensions (mm) 768*512 800*600 500*1000 960*768 975*732 Cabinet resolution 192*128 160*128 96*192 160*128 128*96 Scanning mode 1/16 1/8 1/8 1/8 1/8 Luminance (cd/m2 ) ≥800 ≥2500 ≥2500 ≥2000 ≥1400 Grayscale (bit) ≥12 Refresh rate (Hz) ≥1000 ≥1000 ≥1000 ≥1000 ≥1000 Cabinet weight (Kg) 45±1Kg/m2 Power Consumption(W/m2 ) ≤840 ≤840 ≤840 ≤800 ≤500 Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz Viewing Angle H:140° V:140° Temperature Range (℃) Storage:-40℃~+85℃;Operation:-30℃~+50℃ Operating Humidity 10-90% RH Service Life 100,000H MTBF 5000H IP Rating Indoor IP31,OutdoorIP65 3
  • 6. N series technical parameters Dot spacing 8mm 10mm 12mm Pixel composition SMD3528 SMD3528 DIP346 SMD3528 DIP346 Pixel density (/m2 ) 15625 10000 6944 Applicable environment Indoor Indoor Outdoor Indoor Outdoor 4
  • 7. Module dimensions (mm) 256*128 320*160 160*160 192*192 192*192 Module resolution 32*16 32*16 16*16 16*16 16*16 Cabinet dimensions (mm) 1024*768 960*640 800*640 1152*768 960*960 Cabinet resolution 128*96 96*64 80*64 96*64 80*80 Scanning mode 1/8 1/4 1/4 1/4 1/2 Luminance (cd/m2 ) ≥1200 ≥1500 ≥6500 ≥1100 ≥6500 Grayscale (bit) ≥12 Refresh rate (Hz) ≥1000 ≥1000 ≥1000 ≥1000 ≥1000 Cabinet weight (Kg) Indoor 45±1Kg/m2 Outdoor 58±1Kg/m2 Power Consumption(W/m2 ) ≤450 ≤600 ≤600 ≤450 ≤600 Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz Viewing Angle SMD--H:140° V:140° DIP--H:120° V:90° Temperature Range (℃) Storage:-40℃~+85℃;Operation:-30℃~+50℃ Operating Humidity 10-90% RH Service Life 100,000H MTBF 5000H IP Rating Indoor IP31,OutdoorIP65 N series technical parameters Dot spacing 16mm 20mm Pixel composition DIP346 DIP346 Pixel density (/m2 ) 3096 2500 Applicable environment Outdoor 5
  • 8. Module dimensions (mm) 256*128 320*160 Module resolution 16*8 16*8 Cabinet dimensions (mm) 1024*768 1024*768 Cabinet resolution 64*48 64*40 Scanning mode Static Static Luminance (cd/m2 ) ≥6500 ≥6000 Grayscale (bit) ≥12 Refresh rate (Hz) ≥1000 ≥1000 Cabinet weight (Kg) 58±1Kg/m2 Power Consumption(W/m2 ) ≤600 ≤570 Input Voltage (V) 100-120V/110-220V/100-240V 50/60Hz Viewing Angle SMD--H:140° V:140° DIP--H:120° V:90° Temperature Range ( )℃ Storage:-40℃~+85℃;Operation:-30℃~+50℃ Operating Humidity 10-90% RH Service Life 100,000H MTBF 5000H IP Rating Indoor IP31,OutdoorIP65 6
  • 9. [III] Introduction to accessories’functions [IV] Cabinet (1) Module Hanging bar – Suspension for cabinet installation Specification: 936mm(L)*110mm(W)*180mm(H)-one for one 1872mm(L)*110mm(W)*180mm(H)-one for two Weight:10.2Kg 21Kg Color:Black Hanging beam U – haped connector – ixed the connection between hanging beam. Weight :510g Color :Black Square four-hole connector – Connect & fix each cabinet. Two-hole rectangle connect – Connect & fix each cabinet. Two-hole bent connector – Connect and lock cabinet onto the tube. Weight :355g 193g 455g Color:Black SMD LED Signal interface Module power supply DIP LED 7
  • 10. (2) Cabinet Positioning pilar Quickly align for cabinet installation Signal & Power Output Handle Hold up the box for other operations  Door Lock Cabinet back cover protection lock Side Lock Connect to the adjacent cabinets Mounting Screw Holes A fixed connecting between the cabinets  Signal & Power Input        8
  • 11. III. Wire rod part Name: LED main power line Specifications: 3*2.5mm2 multiple copper cores (brown, blue, kelly) Length: 5m/10m/15m Color: black Name: main signal line of sending card to cabinet Specifications:  superoxide five, unshielded, cable core 24AWG  superoxide five 8P with double-shielded single cable of single core  8 cables with multiple cores, superoxide five GB cable Length: 5m/10m/15m Color: black /grey Name: cascading signal line between cabinets Specifications: Both ends with NEUTRIK blue / yellow Air plug (Top-bottom cascading) Both ends with NEUTRIK blue / yellow Air plug (Left-right cascading) Length:350mm/500mm/800mm Color:Black Name: Cascading power line between cabinets (the international standard - optional) Specifications: Both ends with NEUTRIK blue / white Air plug (Top-bottom cascading) Both ends with NEUTRIK blue / white Air plug (Left-right cascading) Length:900mm/1300mm Color:Black Name: Cascading signal line between cabinets Specifications: With air plugs at both ends plus crystal head(top- bottom cascading) With air plugs at both ends plus crystal head(left-right cascading) Length:350mm/500mm/800mm/900mm/1300mm Color:Black/grey Name: Modular cascading signal line Specification:2*8P-2.54mm spacing Length:100mm/120mm/150mm/200mm/300mm/500mm Color:Gray 9
  • 12. IV. LED installation [I] Installation tools and accessories M10*20mm Screw – Fix hanging bar and U-shape connector M10*25mm screw – fixing the cabinet for vertical and hoisting installation M10*65mm bolt – ixing the cabinet for vertical installation U-shaped shackle – Suspended installation accessories S8 internal hexagonal wrench – used for tightening M10mm screw Cross screwdriver Digital multimeter – used for measuring circuit Key – used to open or lock cabinet back door 10
  • 13. [II] Installation method N series LED display is divided into two kinds of installation:vertical installation and hoisting installation (1) Procedures of seated installation  With 40mm * 40mm square tube steel make a steel structure in accordance with the size of cabinet .  Put the positive direction of the cabinet on the support rods of steel structures bottom.  Use the two- holes and bend connector hitch the steel tube, make sure the screw hole aim at the mounting hole of the cabinet corner.  With M10 * 25mm hex head screws through the screw holes of mounting piece and fixed together with the cabinet mounting holes. Two-hole bent connector M10*25mm SHCS
  • 14.  When installing the second row cabinets, screw out the positioning column of the top of following cabinet, aiming at the bottom of the cabinet positioning hole then insert. With connectors to lock adjacent cabinets.  The second cabinet next to the first box, fix with M10 * 25mm SHCS go through the square four- hole connector ,and then locked.
  • 15.  Connector Usage: a, Use M10 * 25mm SHCS and two-hole bend connector to install the cabinets on both sides of steel frame. b, The two cabinets one the steel tube installed with M10 * 65mm SHCS, four-hole connector, two-hole connector.