KYL-200L is a low power wireless transceiver data module produced by Shenzhen KYL Communication Equipment Co., Ltd. It has a small size, low power consumption, and provides reliable wireless data transmission over long ranges up to 3km at 1200bps. The module uses half-duplex communication and supports multiple connection interfaces, frequency bands, data rates, and optional antennas. It is suitable for applications such as automatic meter reading systems, wireless security/alarm systems, and wireless data collection systems.
KYL-300M, the high speed data radio is designed to be low cost and high performance radio modem. The new design makes the modem more flexible for different application in various configurations. Basically, this type of modem is SMART enough to be customized to best meet end user’s requirements. Users don’t have to pay the features that never be used in their projects. The following lists its general functionalities of this series.
Specifications of KYL-300M
* Power output: DC 5V (customize);
* RF power: 2W(customize);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433MHz,450MHz,470MHz or ISM others
* Interface: standard RS-232/RS-485 or USB and TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <30ma><1><20uA;
* RF Line-of-sight Range: 5km(BER=10-3(at)9600bps); 7km(BER=10-3(at)1200bps)
* Size: 80mm*45mm*19mm (without antenna port).
500mW, 1W RF Data Transmitter, 433MHz RF ModuleSunny Zhou
KYL-200L rf module can transmit about 2km-3km, is to instead the RS232, RS485 cable to do wireless communication. Welcome to contact us for more details.
Specifications of KYL-200L
* Power output: DC 5V (customize);
* RF power: ≤500mW(customized 500mW~1W);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433 MHz, 450MHz,470MHz, 868MHz, 915MHz or ISM others
* Interface: standard RS-232/RS-485/TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <28ma><400ma><20ua>2km(BER=10-5(at)9600bps); >3km(BER=10-5(at)1200bps)
* Size: 53x38x10mm (without antenna port).
KYL-300M, the high speed data radio is designed to be low cost and high performance radio modem. The new design makes the modem more flexible for different application in various configurations. Basically, this type of modem is SMART enough to be customized to best meet end user’s requirements. Users don’t have to pay the features that never be used in their projects. The following lists its general functionalities of this series.
Specifications of KYL-300M
* Power output: DC 5V (customize);
* RF power: 2W(customize);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433MHz,450MHz,470MHz or ISM others
* Interface: standard RS-232/RS-485 or USB and TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <30ma><1><20uA;
* RF Line-of-sight Range: 5km(BER=10-3(at)9600bps); 7km(BER=10-3(at)1200bps)
* Size: 80mm*45mm*19mm (without antenna port).
500mW, 1W RF Data Transmitter, 433MHz RF ModuleSunny Zhou
KYL-200L rf module can transmit about 2km-3km, is to instead the RS232, RS485 cable to do wireless communication. Welcome to contact us for more details.
Specifications of KYL-200L
* Power output: DC 5V (customize);
* RF power: ≤500mW(customized 500mW~1W);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433 MHz, 450MHz,470MHz, 868MHz, 915MHz or ISM others
* Interface: standard RS-232/RS-485/TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <28ma><400ma><20ua>2km(BER=10-5(at)9600bps); >3km(BER=10-5(at)1200bps)
* Size: 53x38x10mm (without antenna port).
Specifications of KYL-200U
* Power output: DC 5V (customize);
* RF power: ≤10mW(customized 10~100mW);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433 MHz, 450MHz,470MHz, 868MHz, 915MHz or ISM others
* Interface: standard RS-232/RS-485/TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <20ma><40ma><20uA;
* RF Line-of-sight Range: 600m(BER=10-5(at)9600bps);1000m(BER=10-5(at)1200bps);
* Size: 47mm*26mm*10mm (without antenna port).
Specifications of KYL-200U
* Power output: DC 5V (customize);
* RF power: ≤10mW(customized 10~100mW);
* RF Effective Rate: 1200/2400/4800/9600/19200bps
* Interface baud rate: 1200/2400/4800/9600/19200bps optional
* Frequency Band: 433 MHz, 450MHz,470MHz, 868MHz, 915MHz or ISM others
* Interface: standard RS-232/RS-485/TTL
* Communication Mode: Half-duplex
* Offering a transparent data interface, it is suitable for any standard or non-standard user protocols
* Channel: 8(Default),16/32(customized)
* Receive current: <20ma><40ma><20uA;
* RF Line-of-sight Range: 600m(BER=10-5(at)9600bps);1000m(BER=10-5(at)1200bps);
* Size: 47mm*26mm*10mm (without antenna port).
RF data module, 433MHz wireless transceiver, RS232 to wireless RS485 to wireless 100mW data module serial to wireless module UHF band wireless data transfer module
Sagittar License-exempt Band 5.8GHz (ISM) PDH Digital Microwave Radio Brochur...Sagittar
Sagittar License-exempt Band 5.8GHz (ISM Band) PDH Digital Microwave Radio Brochure - shortform name "SGT-LPN-58V Radio". These links are used for microwave backhaul. Distances up to 50km are typically common (however, distances in excess of 50km are also possible when using link design methods, such as those within the application Pathloss).
1w radio modem, 12V data module, wireless transmitter and wireless receiver, 2km control distance, RS232, RS485 convert to wireless. PTZ wireless control, AMR, LED Wireless display
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
1. Shenzhen KYL Communication Equipment Co., Ltd
KYL-200L Low Power Wireless
Transceiver Data Module
Shenzhen KYL Communication Equipment Co., Ltd
Address: C3705-3707, Huangdu Square, South of Exhibition Center, Yitian Road,
Futian District, Shenzhen, Guangdong, China 518048
Tel: 86-755-82943662
Fax: 86-755-83408785
Skype KYL-Sunny
Yahoo messenger: KYL_Sunny@yahoo.com
MSN: KYL-Sunny@hotmail.com
Email: sales02@rf-data.com
Website: http://www.rf-data.com
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 1
2. Shenzhen KYL Communication Equipment Co., Ltd
Before using our products, please read the user manual carefully. Any questions,
Welcome to contact us.
I About KYL-200L
KYL-200L is a kind of low power wireless transceiver data module. With small size,
low power consumption as well as good stability and reliability, it is widely used as
wireless data transmitter in long-ranges such as AMR and wireless telemetry system.
Its channel spacing is as low as 25 KHz and the frequency stability is 2.5ppm
II Data Sheet of KYL-200L
PERFORMANCE
Power Output: 500mW(Default), (500mW~1W optional)
RF Line-of-sight Range: 3Km@1200bps; 2Km@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200bps
Space Channel: 1MHz(Default), (12.5/25KHz/other Customiz )
Bandwidth: 25KHz
Receiver Sensitivity: -123dBm@1200bps (1% BER)
NETWORKING
Networking Topology: Point-to-point, point-to-multipoint
COMPATIBILITY
HAC-LAN
POWER
Supply Voltage: 5V DC (Default); (7.5~9V optional)
Transmit Current: <400mA
Receive Current: <28mA
Sleep current: <20uA
GENERAL
Communication Mode: Half-duplex
Frequency Band: 400-470MHz,868MHz, 915MHz
Channel: 8(default),16/32/64(optional)
Interface: TTL/UART, Non-Standard RS232/RS485
PHYSICAL PROPERTIES
Size: 53mm×38mm×10mm
Weight: 22g
Antenna Base: 50Ω, SMA
Operating Temperature: Industrial:-40 ~+80 (TCXO)
Frequency Stability: ±2.5ppm Industrial
CERTIFICATIONS
FCC/RoHS/CE
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 2
3. Shenzhen KYL Communication Equipment Co., Ltd
III Features of KYL-200L
1. Low power transmission: 500mW (default), 600mW~1W (optional).
2. Carrier frequency: 433MHz (default), 400-470MHz, 868MHz, 915MHz
(optional)
3. High anti- interference and Low BER (Bit Error Rate)
Based on GFSK modulation, high-efficiency forward error correction channel
encoding technology is used to ensure the data’s resistance against both transient
interference and random interference. The actual BER can be achieved to 10-5~ 10-6
when channel BER is 10-2.
4. Long Transmission Distance
Within the visible range, when the height of antenna is higher than 2m and the BER
is 10-3, the reliable transmission distance is 3000m @1200bps and 2000m@9600bps
respectively.
5. Transparent data transmission
Transparent data interface used in transceivers is to satisfy many standard and
nonstandard user protocols. Any false data generated in air can be filtrated
automatically (What has been received is exactly what has been transmitted).
6. Multi-channels
KYL-200L provides 8 channels, expandable for 16, 32 channels according to
requirements of users.
7. 2 ports with three connection methods
KYL-200L transceivers provide 2 ports with three connections: a UART interface
of TTL level, a non-standard RS-232 port and a non-standard RS-485 port.
8. Big data buffer area
With optional interface baud rates: 1200/4800/9600/19200bps and 8N1/8E1/8O1
data format (decide by user), the transceiver can transmit unlimited data frames
with flexible user program.
Note: the RF data rate is only settled down before delivery; please specify our sales
your requirements when placing your orders.
9. Intelligent data control system and no other extra programs required
Even for half duplex communication, no other excessive programs are required.
All RF system data transmission/reception and other On-the-Fly conversion and
control are performed by KYL-200L transceivers automatically.
10. Lower power consumption & nice sleep function
With +5V power, the receiving current is less than 25mA, the transmitting current
is less than 300mA, and the sleeping current is less than 20uA.
11. High reliability, small size and excellent performance
By using monolithic radio-frequency integrated circuit and single-chip MCU, the
transceivers have less peripheral circuits, high reliability, and low failure rate.
12. Various options for configurable antennas.
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 3
4. Shenzhen KYL Communication Equipment Co., Ltd
III: Application of KYL-200L:
KYL-200L is suitable for:
* Automatic Meter Reading (AMR);
* Wireless alarm and security systems;
* Building automation, security systems, wireless monitor;
* Wireless data transmission, automatic data collection system;
* Wireless POS, PDA wireless smart terminal;
* RF transmitter, Wireless electronic display screen and Queuing machine;
* Wireless telemetry; remote control and access control system;
* Wireless modem automobile inspection and four-wheel orientation;
* Wireless sensor, Industrial wireless remote control;
* Data communication in the aspects of railway, oil field, dock and army.
* LED display in thruway and public place;
* Point to multi-point wireless network.
IV: How to use the KYL-200L
KYL-200L provide RS-232, RS-485 and UART/TTL level interface ports which can
be direct connected with PC, RS485 devices, monolithic processors and other UART
components. Please find the schematic diagram below:
1. Power supply
The factory setting is +5V (needing 7.5V-12V, please notify us when placing the
order).
2. Connection Definition with terminal
KYL-200L transceivers supply one 9-pin connector (JP1), their definitions and
connection methods with terminals are shown in Table 1.
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 4
5. Shenzhen KYL Communication Equipment Co., Ltd
Table 1: JP1 Pin Definitions and connection methods
Pin No. Signal Name Function Level Connection Remarks
with terminal
1 GND Grounding of power supply Ground
2 Vcc Power supply DC 5V
3 RxD/TTL Serial data input to the transceiver TTL TxD
4 TxD/TTL Transmitted data out of the TTL RxD
transceiver
5 SGND Signal
6 A (TXD) A of RS-485(TxD of RS-232) A(RxD)
7 B (RXD) B of RS-485(RxD of RS-232) B(TxD)
8 SLEEP Sleep control (input) TTL Sleep signal High level
sleep
9 RESET Reset signal(input) TTL Negative
pulse reset
3. The connection schematic diagram between computer and our RF module
4. Setting of channel, interface, and data format
Before using KYL-200L, the user needs to make simple configuration to
determine the channel, interface mode and data format based on his own needs.
You can view or change the module's interface baud rate, channel and address
code, parameter setting or reading as per the testing software KYLCOM in the PC
(in products box).
i. Channel configuration:
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 5
6. Shenzhen KYL Communication Equipment Co., Ltd
Channel No. Frequency Channel No. Frequency
1 429.0325MHZ 5 433.0325MHZ
2 430.0325MHZ 6 434.0325MHZ
3 431.0325MHZ 7 435.0325MHZ
4 432.0325MHZ 8 436.0325MHZ
Note: the frequency points corresponding to each channel can be adjusted
based on the user’s needs.
You can read and change some data sheet by our software. If needed, please
find the instruction on our website.
5. Installation dimension:
6. The Function-indicator light
a. The LED indicator light will turn red for 0.5S once switch on.
b. The LED indicator light will turn green continually while receiving data from air.
c. The LED indicator light will turn red continually when transmitting data into air
after receiving from COM.
d. If the module keeps sleep function, LED indicator light is always dark.
7. Supported protocol and Transmit capability
KYL-200L standard transceivers offer transparent protocol to support various
applications and protocols of users. If you need to decrease his cost or ease the
workload of terminal CPU, we can add other specific functions based on the
transparent protocol, such as addressing, data acquisition, command interpretation,
etc.
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 6
7. Shenzhen KYL Communication Equipment Co., Ltd
8. Sleep function
In order to reduce consumption, KYL-200L transceivers support sleep function. In
sleep mode, the current consumption is less than 20uA.
a. How to use sleep function:
The Pin8 ‘SLP’ in JP1 is the signal of sleep control. At high power level,
transceiver stays in working mode. At low power level (<0.5V), transceiver stays
in sleep mode. The SLP signal can convert transceiver from working to sleep
mode in 1ms after falling edge. If the Sleep signal arrives when the transceiver is
transmitting data, the module will move to sleep mode after finishing
transmission. From sleep moves to working, it takes the transceiver 1ms after
rising edge.
To disable the opened sleep function of KYL-200L, the SLP (SLEEP) pin should
be definitely connected with 0 or ground.
b. Attentions about using sleep function:
When the sleep function enabled, or any supply glitches, such as switch dithering,
fire striking or quick switching on and off, may cause the transceiver switch to
wrong sleep mode.
After switching on, users can avoid this error by making a compulsive restoration
once after the CPU delays 100ms.
Sleep Timing Diagram:
9. Attentions about data transmission
a. The delay time (tc) of conversion between transmitting and receiving is less
than 1ms.
Timing diagram:
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 7
8. Shenzhen KYL Communication Equipment Co., Ltd
b. The delay time of transceivers between the first bit sent by TxD to the first
bit received by RxD.
As data processing will be made on user’s data by KYL-200L transceiver using
FEC (Forward Error Correction) or other correction algorithm, when RxD of a
KYL-200L transceiver ‘A’ receives the data, then transmits it, the other one
transceiver ‘B’ will have a delay (ts) to receive and transmit by TxD. Different
RF data rate causes different delay time. Please see the specific delay time
below:
RF Date Rate Delay RF Date Rate Delay
(bps) Ts(mS) (bps) Ts(mS)
1200 90 9600 16
2400 48 19200 10
4800 30
Timing diagram:
c. Error dealing procedure:
To enhance the reliability and stability of user’s systems, a verify bit or a Cyclic
Redundancy Check (CRC) mode is highly recommended to prevent wrong
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 8
9. Shenzhen KYL Communication Equipment Co., Ltd
information while using KYL-200L modules.
d. Large-number data transmission
In theory, when the interface data rate is faster than the RF data rate, KYL-200L
transceivers can sent unlimited-long data package, but long packages more than
120B are not recommended. The length of each package should be between
60~100B. We also recommend our users to use Automatic Error Request
Equipment (ARQ) to prevent wrong information.
Reasons:
What if the actual transmission BER (Bit Error Rate) is 10-4, 1 packet with 1KB
data which is about 10-thousand bits, is sent, theoretically, at least 1 bit will be
received wrongly, then the 1KB information will never be received correctly.
But if we package the data into 10 packets with 100B for each, when all 10
packets are sent, there will be only 1 packet wrong according to this probability.
After that, resend this wrong packet using ARQ mode. So by resending one more
packet and the efficiency rate is reduced 10%, all data will be absolutely received
correctly.
10. Antenna configuration:
Many appropriative antennas for low power RF modules are selected to meet
different users’ antenna configurations. Please ask our Sales for more information
about the antenna’s dimension and performance.
a. Helical SMA antennas
KYL-ANT-433-10-SMA: 100mm helical SMA antennas with high gain and low
cost, reach a long distance.
KYL-ANT-433-3-SMA: 28mm SMA helical antenna with magnetic core, small
size, beautiful appearance (like the mobile phone antenna)
KYL-ANT-433-10-ZSMA: 100mm SMA helical antenna with folding joint, easy
for adjusting the direction and fixing.
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 9
10. Shenzhen KYL Communication Equipment Co., Ltd
b. Magnetic vehicle antenna
KYL-ANT-O433S-300H1.5-SMA: include magnetic antenna base, suitable for
equipment with metal shell, easy for fixing, effective to enhance the transmission
distance.
For more kinds of antennas please go to our website:
http://www.rf-data.com/Products_list_en.asp?classid=163
If you have special requirements on antennas, we can design and produce for you
individually.
V. Network Application of KYL-200L
The communication channel of KYL-200L is half duplex, which is most suitable
for the communication mode of point to multi-point. Under this mode, one
master station must be set, and all of the rest are slave stations. A unique address
is given to each station. The coordination of communication is controlled by
master station that uses data frames containing address code to transmit data or
command. Slave station will receive all of the data and command and compare
the received address code with local address code. If they are different, the data
will be deserted without any response. If those address codes are the same, it
means the data is sent to the local. Slave station will make different responses
according to the transmitted data or command and send back the data of response.
All these jobs must be performed by upper protocol, and it is assured that there is
only one transmitter-receiver in the state of transmission in the communication
network at any instant moment so as to avoid the cross-interference.
KYL-200L can also be used for point-to-point communication with easier
operation. For the programming of serial port, all you have to do is to remember
that its communication mode is semi duplex while always observing the time
sequence of come-and-go for receiving and transmitting.
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 10
11. Shenzhen KYL Communication Equipment Co., Ltd
VII. Description of type
KYL-200L-96
Baud Rate
12:1200bps
Manufacture Type
24:2400bps
48:4800bps
96:9600bps
192:19200bps
Fax: +86-755-83408785 sales02@rf-data.com www.rf-data.com 11