This document discusses quality control procedures for LCR meter manufacturers. It explains that LCR meters are precision instruments used to measure inductance, capacitance and resistance. Quality control is important throughout the manufacturing process, including component selection, data collection, and process optimization. Standards like ISO 9001 help guide quality control procedures. Key steps include inspecting components, testing circuit boards, approving first article samples, and ensuring traceability. Maintaining a clean production environment and using certified technicians are also important for quality control when manufacturing LCR meters.
Introduction To manage electronics they must be monitored.pdfbkbk37
The document discusses quality control procedures for manufacturing LCR meters. It describes how LCR meters are used to measure electrical components and the importance of quality control in electronics manufacturing. Key aspects of quality control addressed include component selection and testing, process optimization, and certification. The document also discusses common failures of LCR meters and factory actions to control quality such as defining acceptable ranges for control materials and using quality control data to determine if daily runs are in or out of control.
elec calc - electrical calculation Low and High Voltage software | BIMGuillem Fiter
electrical sizing software for low and medium voltage facilities. Earthing systems, discrimitian among protections, short circuit currents, international standards IEC, calculation under different scenarios.
Muhammad Ali has over 10 years of experience in quality assurance, production management, and instrumentation engineering. He holds a Bachelor's degree in Electronic Engineering and is currently working as an Assistant Instrument Engineer in Saudi Arabia. He is proficient in several computer skills and software programs relevant to engineering.
Ensuring Precision and Performance Quality Control in Probe Card Manufacturin...Semi Probes Inc
Probe cards are used to test semiconductors and ensure quality. They contain probes that make electrical contact with semiconductor wafers during testing. Maintaining high quality is crucial in probe card manufacturing, which involves several stages: design, material selection, precision machining, assembly, calibration, and testing. Quality control occurs throughout using methods like visual inspection, electrical testing, reliability testing, process control, and failure analysis to check specifications are met. This helps prevent faulty chips and ensures reliable semiconductor testing results.
Optimizing Semiconductor Performance The Role of Probe Cards Maintenance Supp...Semi Probes Inc
Probe cards are essential tools used to test semiconductors and require regular maintenance due to wear from harsh testing conditions. Probe card maintenance suppliers provide specialized cleaning, calibration, component replacement, and performance optimization services to prevent downtime, extend lifespan, and ensure optimal performance. As semiconductor technology advances, the integration of AI and continued collaboration between manufacturers and suppliers will be important to support more sophisticated testing of next-generation devices.
Design of Low Cost Line Impedance Stabilization Network Using RLC Components ...IRJET Journal
This document describes the design of a low-cost line impedance stabilization network (LISN) using RLC components to test information technology equipment according to CISPR-22 standards. It first provides background on electromagnetic compatibility standards and the purpose of a LISN. It then details the design process, including using low-pass and band-pass filters with specific cutoff frequencies to stabilize input impedance and filter noise. Simulation results using ADS software show the designed LISN provides good impedance matching at low cost.
Solitis Electrical Solutions Pvt. Ltd. is multi-disciplined management and engineering consultancy in Pune, Maharashtra that provides complete electrical engineering design and project management services. We are also actively involved in trading of electrical equipment and components along with consultancy.
Felidae Systems is an upcoming engineering consultancy company engaged in multifarious activities ranging from Energy Consultancy, Energy Management Services, Industry Automation, Panel Manufacturing, And Supplying, etc.
We are manufacturer, trader, and supplier of a qualitative assortment of HT Panel, LT Panel, PLC Panel, VFD Panel, and SCADA Automation System. We are supported by State-of-the-art infrastructural base that comprises various units such as Procurement, Production, Quality Testing, R&D, Warehousing & Packaging, Sales & Marketing, etc. The production unit is outfitted with cutting-edge production technology that helps us in manufacturing panels in compliance with global quality standards. By functioning in synchronize manner, our professionals help us to cater to diverse requirements of clients efficiently.
We have experienced consultants (BEE Accredited Energy Auditor, BEE Certified Energy Auditors, Lead Auditor for EnMS), supported by technically qualified staff for field study. We not only give suggestions for energy saving but also support for energy management & post audit implementation of saving proposals.
Introduction To manage electronics they must be monitored.pdfbkbk37
The document discusses quality control procedures for manufacturing LCR meters. It describes how LCR meters are used to measure electrical components and the importance of quality control in electronics manufacturing. Key aspects of quality control addressed include component selection and testing, process optimization, and certification. The document also discusses common failures of LCR meters and factory actions to control quality such as defining acceptable ranges for control materials and using quality control data to determine if daily runs are in or out of control.
elec calc - electrical calculation Low and High Voltage software | BIMGuillem Fiter
electrical sizing software for low and medium voltage facilities. Earthing systems, discrimitian among protections, short circuit currents, international standards IEC, calculation under different scenarios.
Muhammad Ali has over 10 years of experience in quality assurance, production management, and instrumentation engineering. He holds a Bachelor's degree in Electronic Engineering and is currently working as an Assistant Instrument Engineer in Saudi Arabia. He is proficient in several computer skills and software programs relevant to engineering.
Ensuring Precision and Performance Quality Control in Probe Card Manufacturin...Semi Probes Inc
Probe cards are used to test semiconductors and ensure quality. They contain probes that make electrical contact with semiconductor wafers during testing. Maintaining high quality is crucial in probe card manufacturing, which involves several stages: design, material selection, precision machining, assembly, calibration, and testing. Quality control occurs throughout using methods like visual inspection, electrical testing, reliability testing, process control, and failure analysis to check specifications are met. This helps prevent faulty chips and ensures reliable semiconductor testing results.
Optimizing Semiconductor Performance The Role of Probe Cards Maintenance Supp...Semi Probes Inc
Probe cards are essential tools used to test semiconductors and require regular maintenance due to wear from harsh testing conditions. Probe card maintenance suppliers provide specialized cleaning, calibration, component replacement, and performance optimization services to prevent downtime, extend lifespan, and ensure optimal performance. As semiconductor technology advances, the integration of AI and continued collaboration between manufacturers and suppliers will be important to support more sophisticated testing of next-generation devices.
Design of Low Cost Line Impedance Stabilization Network Using RLC Components ...IRJET Journal
This document describes the design of a low-cost line impedance stabilization network (LISN) using RLC components to test information technology equipment according to CISPR-22 standards. It first provides background on electromagnetic compatibility standards and the purpose of a LISN. It then details the design process, including using low-pass and band-pass filters with specific cutoff frequencies to stabilize input impedance and filter noise. Simulation results using ADS software show the designed LISN provides good impedance matching at low cost.
Solitis Electrical Solutions Pvt. Ltd. is multi-disciplined management and engineering consultancy in Pune, Maharashtra that provides complete electrical engineering design and project management services. We are also actively involved in trading of electrical equipment and components along with consultancy.
Felidae Systems is an upcoming engineering consultancy company engaged in multifarious activities ranging from Energy Consultancy, Energy Management Services, Industry Automation, Panel Manufacturing, And Supplying, etc.
We are manufacturer, trader, and supplier of a qualitative assortment of HT Panel, LT Panel, PLC Panel, VFD Panel, and SCADA Automation System. We are supported by State-of-the-art infrastructural base that comprises various units such as Procurement, Production, Quality Testing, R&D, Warehousing & Packaging, Sales & Marketing, etc. The production unit is outfitted with cutting-edge production technology that helps us in manufacturing panels in compliance with global quality standards. By functioning in synchronize manner, our professionals help us to cater to diverse requirements of clients efficiently.
We have experienced consultants (BEE Accredited Energy Auditor, BEE Certified Energy Auditors, Lead Auditor for EnMS), supported by technically qualified staff for field study. We not only give suggestions for energy saving but also support for energy management & post audit implementation of saving proposals.
This document discusses procedures for loop checking and field instrument testing. It suggests developing standardized procedures to make the process more efficient. Specifically, it proposes: [1] Having a common guideline procedure for loop checking. [2] Illustrating all required drawings, specifications and forms. [3] Creating a flow chart illustrating the process. The comments provide examples of procedures companies use and emphasize the importance of documentation.
Advantage Industrial Automation provides solutions to help customers:
1) Improve productivity and quality, reduce downtime and waste, and increase efficiency and safety.
2) Stay on the cutting edge of automation and control products to provide advantages to their customers.
3) Offer solutions around increasing productivity, ensuring safety, managing energy costs, reducing downtime, improving quality, and providing complete project management and integration.
Improving Yield and Quality in Semiconductor Manufacturing with Indispensable...yieldWerx Semiconductor
Semiconductor manufacturing plays a vital role in the production of electronic devices, powering industries ranging from consumer electronics to automotive and aerospace. As technology advances, there is a growing demand for higher yields and improved reliability in the semiconductor manufacturing process. This blog will explore the challenges faced in semiconductor manufacturing, discuss the importance of yield and reliability, and highlight various strategies and technologies employed to enhance yield management and overall efficiency.
The cable harness tester has an important role in bringing in the quality and reliability of electrical cable assemblies that are used in many industries, such as aerospace, automotive, defence, and manufacturing. This is one of the most important functions of cable harness assembly as it helps in finding defects, ensuring the connectivity is right, and testing the on-field performance of the harnesses.
Ensuring first-time quality has become a crucial aspect of the production process for manufacturers across all manufacturing industries. Processes are beginning to shift away from destructive techniques and sample testing conducted after preliminary production, and move toward continuous inline process monitoring throughout the entire manufacturing process.
Productivity Studies of Ultra High Density (UHD) Stitching Processidescitation
This paper focuses on Ultra High Density (UHD) stitching process of connectors,
where the company relies on 100% manual inspection in UHD connectors. Based on
historical data on production of UHD connectors, typically labour cost involved in
inspection and testing is around 15% of the total manufacturing cost. This poses both
challenges and opportunities for improvement in the bottleneck process, which is the
inspection process. The female connectors quantity produced is on the average of 2000
parts/shift. It takes around 47 sec of visual inspection per connector and around 2.89 sec per
piece for go-gauge inspection. Considering these factors, the objectives of the study was to
understand the whole process in its entirety and then use this knowledge to re-organize the
stages staring from the automatic stitching process. By using process improvement tools of
time study, methods and process mapping, a process re-orientation and re-organization has
been carried out. This resulted in not only reduction of time of inspection and testing of the
connectors, but also the piece inspection process reduced from an average total time of
112.59 sec to 86.15 sec. Overall improvement was also increased from 56% to 79.5%.
This document describes a software system called ExAMS that allows companies to manage explosive inspections and maintenance in a paperless workflow. It reduces administration costs by up to 80% by automating inspection routines, scheduling, and reporting. The software was developed based on 20 years of experience in hazardous inspections and complies with industry regulations. It provides features like predefined inspection routines, electronic signatures, scheduling, and RFID tagging to verify inspections were completed properly.
Nilesh Ravindra More is seeking a career in a growth-oriented organization where he can fully utilize his commitment and expertise. He has a B.E. in Electrical Engineering and experience as a Project Manager and Senior Engineer in fire safety and building automation systems. Currently working as Project Manager at Douse Fire Systems Pvt. Ltd., his responsibilities include quality control, project coordination, risk management, and ensuring projects are completed on time and on budget. He has successfully managed projects for companies like Honda, Maruti Suzuki, and Vodafone.
The document is a curriculum vitae for Muhammad Imran. It summarizes his education, including a bachelor's degree in Mechatronics Engineering from Air University. It describes his final year project on an automatic fire extinguishing system. It outlines his technical skills and internship experiences in fields like power generation and weapons production. It also provides details on his current role installing and maintaining radiology equipment. The CV aims to showcase Imran's qualifications for progressive and challenging organizational roles.
Development of PLC based Transdermal Patch Evaluation SystemIRJET Journal
This document describes the development of a PLC-based system to evaluate the adhesion of transdermal drug patches. The system uses a load cell to measure the peeling force as a patch is removed from a substrate at controlled speeds by a servomotor. The PLC controls the motor and reads the load cell output to perform 180 and 90 degree peel tests according to industry standards. This allows automated testing to improve quality by maintaining consistent test parameters compared to manual methods. The system is designed to objectively measure patch adhesion strength across multiple batches over time to ensure transdermal drug delivery performance.
Cloud computing security or, more simply, cloud security refers to a broad set of policies, technologies, applications, and controls utilized to protect virtualized IP, data, applications, services, and the associated infrastructure of cloud computing. It is a sub-domain of computer security, network security, and, more broadly, information security.
Security issues associated with the cloud
Cloud computing and storage provide users with capabilities to store and process their data in third-party data centers Organizations use the cloud in a variety of different service models (with acronyms such as SaaS, PaaS, and IaaS) and deployment models (private, public, hybrid, and community).
Security concerns associated with cloud computing are typically categorized in two ways: as security issues faced by cloud providers (organizations providing software-, platform-, or infrastructure-as-a-service via the cloud) and security issues faced by their customers (companies or organizations who host applications or store data on the cloud). The responsibility is shared, however, and is often detailed in a cloud provider's "shared security responsibility model" or "shared responsibility model." The provider must ensure that their infrastructure is secure and that their clients’ data and applications are protected, while the user must take measures to fortify their application and use strong passwords and authentication measures.
When an organization elects to store data or host applications on the public cloud, it loses its ability to have physical access to the servers hosting its information. As a result, potentially sensitive data is at risk from insider attacks. According to a 2010 Cloud Security Alliance report, insider attacks are one of the top seven biggest threats in cloud computing. Therefore, cloud service providers must ensure that thorough background checks are conducted for employees who have physical access to the servers in the data center. Additionally, data centers are recommended to be frequently monitored for suspicious activity.
Zero Defects in Semiconductor Manufacturing for Automotive Applications.pptxyieldWerx Semiconductor
The semiconductor industry plays a critical role in providing electronic components for automotive applications. With the increasing complexity and reliance on electronic systems in vehicles, the need for zero defects in semiconductor manufacturing has become paramount. Automotive customers demand high-quality components to ensure the reliability, safety, and performance of their vehicles. Therefore, semiconductor manufacturers are focusing on implementing stringent quality control measures to minimize defects, reduce field returns and warranty issues, and mitigate liability concerns.
A large French pharmaceutical group approached Itris Automation Square to improve compliance with PLC programming standards without manual code review. PLC Checker was identified as an automated solution to review code. It was tested on a project involving 10 PLCs and 7500 I/O points from 6 integrators. After successful use, the client decided to use PLC Checker systematically across the group to improve quality assurance.
NCQC is sharing information about Instrument Calibration and its requirements in organizations. This ppt presentation helps organization and management trainee to understand purpose, importance and requirements of calibration management system.
VOLTRIO SOLUTIONS PVT LTD is a automation product engineering service organiz...voltriosolutions
To accelerate development of your IOT solutions and products we provide Specialized engineering services across the entire IOT development cycle from consulting, device engineering, cloud and mobility application development, data analytics, and support & maintenance.
We are having functional expertise and competency to provide standardized solutions for industrial automation and industry 4.0.
Delivering tailor-made solutions that users can simply ease into with unparalleled expertise in design engineering, factory testing and commissioning of DCS, SCDA and PLC system has created benchmark and gained expert in oil and gas, pharmaceutical industry, automotive manufacturing sector, food & beverages, petrochemical and chemical industry.
ServeGas, an ICV and ISO-certified organization headquartered in Doha, Qatar, stands as a beacon of excellence. Renowned for our comprehensive turnkey strategies within the energy and process industry, we have consistently delivered solutions with unwavering honour and immense pride throughout Qatar.
Catalogo general general electric geit 10012 en-rev6_finalPablo Bavarisco
GE's Inspection Technologies provides non-destructive testing (NDT) solutions for a variety of industries including oil and gas, aerospace, power generation, metals, and transportation. They offer modalities such as radiography, computed tomography, ultrasound, eddy current, and remote visual inspection. Combined with their Rhythm software, GE can provide accurate and reliable inspection data that can be securely shared worldwide.
The document discusses the challenges of ensuring security, reliability, and performance for IoT devices. It identifies the "5 C's + 1" as key challenges: connectivity, continuity, compliance, coexistence, cybersecurity, and customer experience. It emphasizes that addressing all of these multifaceted challenges requires a comprehensive approach across the entire device lifecycle.
This document discusses Fluke Connect Condition Based Maintenance, which pairs Fluke hardware with predictive software and monitoring tools. It provides 5 key benefits: 1) It allows users to start implementing CBM solutions easily without IT hurdles or specialized skills; 2) Electronic data collection improves ROI analysis; 3) The scalable system can grow over time; 4) It optimizes labor and equipment lifespan; 5) The solution works across different equipment and facility types.
Speak to the idea of feminism from your perspective and.docxstirlingvwriters
The document asks students to discuss their perspectives on feminism by answering several questions: 1) What they were taught about feminism by family/culture, 2) If they identify as a feminist and how that label may change based on audience, 3) The most important issue regarding feminism/gender equality today, 4) Whether the quote about privilege and equality resonates regarding gender, and 5) What they wish another gender understood about their experiences. Students are asked to write a minimum 270-word initial post responding to the questions.
Demand/Supply Integration (DSI) aims to align demand signals with supply planning to achieve an ideal state where inventory levels and production schedules match customer demand. However, issues like data or system silos between functions can prevent the ideal DSI state. Warehouses and distribution centers create value in the supply chain by storing inventory in strategic locations to efficiently meet customer demand and support supply chain operations.
This document discusses procedures for loop checking and field instrument testing. It suggests developing standardized procedures to make the process more efficient. Specifically, it proposes: [1] Having a common guideline procedure for loop checking. [2] Illustrating all required drawings, specifications and forms. [3] Creating a flow chart illustrating the process. The comments provide examples of procedures companies use and emphasize the importance of documentation.
Advantage Industrial Automation provides solutions to help customers:
1) Improve productivity and quality, reduce downtime and waste, and increase efficiency and safety.
2) Stay on the cutting edge of automation and control products to provide advantages to their customers.
3) Offer solutions around increasing productivity, ensuring safety, managing energy costs, reducing downtime, improving quality, and providing complete project management and integration.
Improving Yield and Quality in Semiconductor Manufacturing with Indispensable...yieldWerx Semiconductor
Semiconductor manufacturing plays a vital role in the production of electronic devices, powering industries ranging from consumer electronics to automotive and aerospace. As technology advances, there is a growing demand for higher yields and improved reliability in the semiconductor manufacturing process. This blog will explore the challenges faced in semiconductor manufacturing, discuss the importance of yield and reliability, and highlight various strategies and technologies employed to enhance yield management and overall efficiency.
The cable harness tester has an important role in bringing in the quality and reliability of electrical cable assemblies that are used in many industries, such as aerospace, automotive, defence, and manufacturing. This is one of the most important functions of cable harness assembly as it helps in finding defects, ensuring the connectivity is right, and testing the on-field performance of the harnesses.
Ensuring first-time quality has become a crucial aspect of the production process for manufacturers across all manufacturing industries. Processes are beginning to shift away from destructive techniques and sample testing conducted after preliminary production, and move toward continuous inline process monitoring throughout the entire manufacturing process.
Productivity Studies of Ultra High Density (UHD) Stitching Processidescitation
This paper focuses on Ultra High Density (UHD) stitching process of connectors,
where the company relies on 100% manual inspection in UHD connectors. Based on
historical data on production of UHD connectors, typically labour cost involved in
inspection and testing is around 15% of the total manufacturing cost. This poses both
challenges and opportunities for improvement in the bottleneck process, which is the
inspection process. The female connectors quantity produced is on the average of 2000
parts/shift. It takes around 47 sec of visual inspection per connector and around 2.89 sec per
piece for go-gauge inspection. Considering these factors, the objectives of the study was to
understand the whole process in its entirety and then use this knowledge to re-organize the
stages staring from the automatic stitching process. By using process improvement tools of
time study, methods and process mapping, a process re-orientation and re-organization has
been carried out. This resulted in not only reduction of time of inspection and testing of the
connectors, but also the piece inspection process reduced from an average total time of
112.59 sec to 86.15 sec. Overall improvement was also increased from 56% to 79.5%.
This document describes a software system called ExAMS that allows companies to manage explosive inspections and maintenance in a paperless workflow. It reduces administration costs by up to 80% by automating inspection routines, scheduling, and reporting. The software was developed based on 20 years of experience in hazardous inspections and complies with industry regulations. It provides features like predefined inspection routines, electronic signatures, scheduling, and RFID tagging to verify inspections were completed properly.
Nilesh Ravindra More is seeking a career in a growth-oriented organization where he can fully utilize his commitment and expertise. He has a B.E. in Electrical Engineering and experience as a Project Manager and Senior Engineer in fire safety and building automation systems. Currently working as Project Manager at Douse Fire Systems Pvt. Ltd., his responsibilities include quality control, project coordination, risk management, and ensuring projects are completed on time and on budget. He has successfully managed projects for companies like Honda, Maruti Suzuki, and Vodafone.
The document is a curriculum vitae for Muhammad Imran. It summarizes his education, including a bachelor's degree in Mechatronics Engineering from Air University. It describes his final year project on an automatic fire extinguishing system. It outlines his technical skills and internship experiences in fields like power generation and weapons production. It also provides details on his current role installing and maintaining radiology equipment. The CV aims to showcase Imran's qualifications for progressive and challenging organizational roles.
Development of PLC based Transdermal Patch Evaluation SystemIRJET Journal
This document describes the development of a PLC-based system to evaluate the adhesion of transdermal drug patches. The system uses a load cell to measure the peeling force as a patch is removed from a substrate at controlled speeds by a servomotor. The PLC controls the motor and reads the load cell output to perform 180 and 90 degree peel tests according to industry standards. This allows automated testing to improve quality by maintaining consistent test parameters compared to manual methods. The system is designed to objectively measure patch adhesion strength across multiple batches over time to ensure transdermal drug delivery performance.
Cloud computing security or, more simply, cloud security refers to a broad set of policies, technologies, applications, and controls utilized to protect virtualized IP, data, applications, services, and the associated infrastructure of cloud computing. It is a sub-domain of computer security, network security, and, more broadly, information security.
Security issues associated with the cloud
Cloud computing and storage provide users with capabilities to store and process their data in third-party data centers Organizations use the cloud in a variety of different service models (with acronyms such as SaaS, PaaS, and IaaS) and deployment models (private, public, hybrid, and community).
Security concerns associated with cloud computing are typically categorized in two ways: as security issues faced by cloud providers (organizations providing software-, platform-, or infrastructure-as-a-service via the cloud) and security issues faced by their customers (companies or organizations who host applications or store data on the cloud). The responsibility is shared, however, and is often detailed in a cloud provider's "shared security responsibility model" or "shared responsibility model." The provider must ensure that their infrastructure is secure and that their clients’ data and applications are protected, while the user must take measures to fortify their application and use strong passwords and authentication measures.
When an organization elects to store data or host applications on the public cloud, it loses its ability to have physical access to the servers hosting its information. As a result, potentially sensitive data is at risk from insider attacks. According to a 2010 Cloud Security Alliance report, insider attacks are one of the top seven biggest threats in cloud computing. Therefore, cloud service providers must ensure that thorough background checks are conducted for employees who have physical access to the servers in the data center. Additionally, data centers are recommended to be frequently monitored for suspicious activity.
Zero Defects in Semiconductor Manufacturing for Automotive Applications.pptxyieldWerx Semiconductor
The semiconductor industry plays a critical role in providing electronic components for automotive applications. With the increasing complexity and reliance on electronic systems in vehicles, the need for zero defects in semiconductor manufacturing has become paramount. Automotive customers demand high-quality components to ensure the reliability, safety, and performance of their vehicles. Therefore, semiconductor manufacturers are focusing on implementing stringent quality control measures to minimize defects, reduce field returns and warranty issues, and mitigate liability concerns.
A large French pharmaceutical group approached Itris Automation Square to improve compliance with PLC programming standards without manual code review. PLC Checker was identified as an automated solution to review code. It was tested on a project involving 10 PLCs and 7500 I/O points from 6 integrators. After successful use, the client decided to use PLC Checker systematically across the group to improve quality assurance.
NCQC is sharing information about Instrument Calibration and its requirements in organizations. This ppt presentation helps organization and management trainee to understand purpose, importance and requirements of calibration management system.
VOLTRIO SOLUTIONS PVT LTD is a automation product engineering service organiz...voltriosolutions
To accelerate development of your IOT solutions and products we provide Specialized engineering services across the entire IOT development cycle from consulting, device engineering, cloud and mobility application development, data analytics, and support & maintenance.
We are having functional expertise and competency to provide standardized solutions for industrial automation and industry 4.0.
Delivering tailor-made solutions that users can simply ease into with unparalleled expertise in design engineering, factory testing and commissioning of DCS, SCDA and PLC system has created benchmark and gained expert in oil and gas, pharmaceutical industry, automotive manufacturing sector, food & beverages, petrochemical and chemical industry.
ServeGas, an ICV and ISO-certified organization headquartered in Doha, Qatar, stands as a beacon of excellence. Renowned for our comprehensive turnkey strategies within the energy and process industry, we have consistently delivered solutions with unwavering honour and immense pride throughout Qatar.
Catalogo general general electric geit 10012 en-rev6_finalPablo Bavarisco
GE's Inspection Technologies provides non-destructive testing (NDT) solutions for a variety of industries including oil and gas, aerospace, power generation, metals, and transportation. They offer modalities such as radiography, computed tomography, ultrasound, eddy current, and remote visual inspection. Combined with their Rhythm software, GE can provide accurate and reliable inspection data that can be securely shared worldwide.
The document discusses the challenges of ensuring security, reliability, and performance for IoT devices. It identifies the "5 C's + 1" as key challenges: connectivity, continuity, compliance, coexistence, cybersecurity, and customer experience. It emphasizes that addressing all of these multifaceted challenges requires a comprehensive approach across the entire device lifecycle.
This document discusses Fluke Connect Condition Based Maintenance, which pairs Fluke hardware with predictive software and monitoring tools. It provides 5 key benefits: 1) It allows users to start implementing CBM solutions easily without IT hurdles or specialized skills; 2) Electronic data collection improves ROI analysis; 3) The scalable system can grow over time; 4) It optimizes labor and equipment lifespan; 5) The solution works across different equipment and facility types.
Similar to KD4010 Magnetism And Electronics.docx (20)
Speak to the idea of feminism from your perspective and.docxstirlingvwriters
The document asks students to discuss their perspectives on feminism by answering several questions: 1) What they were taught about feminism by family/culture, 2) If they identify as a feminist and how that label may change based on audience, 3) The most important issue regarding feminism/gender equality today, 4) Whether the quote about privilege and equality resonates regarding gender, and 5) What they wish another gender understood about their experiences. Students are asked to write a minimum 270-word initial post responding to the questions.
Demand/Supply Integration (DSI) aims to align demand signals with supply planning to achieve an ideal state where inventory levels and production schedules match customer demand. However, issues like data or system silos between functions can prevent the ideal DSI state. Warehouses and distribution centers create value in the supply chain by storing inventory in strategic locations to efficiently meet customer demand and support supply chain operations.
Thinking about password identify two that you believe are.docxstirlingvwriters
Brute force and dictionary attacks are two of the most dangerous password attacks. Brute force attacks can reveal passwords by trying all possible combinations, while dictionary attacks use common words and personal information to crack passwords. Organizations can implement strong password policies, multi-factor authentication, and monitoring for brute force attempts to better protect against these attacks.
The student will demonstrate and articulate proficiency in.docxstirlingvwriters
The student will demonstrate their clinical reasoning and prioritizing skills by reviewing a client case study, gathering evaluation and test results, and using this data to develop both long term and short term goals for the client's plan of care. To complete this assignment, the student will be provided a case study involving various impairments and dysfunctions and will analyze the evaluation to determine and write appropriate long and short term goals.
To help lay the foundation for your study of postmodern.docxstirlingvwriters
This document provides guidance for studying postmodern models of marriage and family therapy. It lists topics for discussion with a professor including social constructionism versus systems theory, postmodern philosophy assumptions versus modernist therapists, components of the recovery model, and identifying a personal model of MFT. Students are asked to discuss one unclear concept with the professor to improve their understanding.
TITLE Digital marketing before and after pandemic Sections that.docxstirlingvwriters
This document outlines the required sections for a report on digital marketing before and after the pandemic. The report must include an Introduction section describing the topic, a Discussion section comparing digital marketing practices pre- and post-pandemic, and a Conclusion section. An additional section on changes in consumer habits during the pandemic is recommended. Each section should be briefly described and references included.
This assignment focuses on Marxist students will educate.docxstirlingvwriters
The document instructs students to analyze the 2014 Flint, Michigan lead water crisis from a Marxist class perspective. Students are asked to educate themselves on the crisis, present the demographics of Flint, and explain the issues. They should then apply Marxist's two-class analysis of bourgeoisie and proletariat, as well as two social concepts, relating these to the crisis. At least two peer-reviewed sources no older than five years should validate the arguments.
The document provides a prompt for a 2-page journal entry discussing the role of art in promoting social change in America, referring to at least three works read in class: Upton Sinclair's "The Jungle", W.E.B. Du Bois's "The Souls of Black Folk", and Richard Wright's "Native Son". The journal must specifically analyze how these three novels addressed and impacted social issues through literature, supported by references from the texts, and should reflect knowledge of the authors and themes without summarizing plot.
The document discusses cybersecurity topics including botnets, intrusion detection systems, international efforts to support Ukrainian cyber defense, and cyber threat intelligence analysis regarding video conferencing software vulnerabilities. Specifically, it asks the reader to:
1) Name 5 intrusion detection system alternatives to Snort.
2) Describe 3 international efforts that support Ukrainian cyber defense based on a provided table from a Carnegie Endowment website.
3) Compile lists of known vulnerabilities in Zoom, Cisco WebEx, and Microsoft Teams and recommend one based on security. It also asks the reader to identify resources with official patch notes for these tools and discuss the details and timings provided in the notes and whether they would change the initial recommendation.
There are many possible sources of literature for.docxstirlingvwriters
This document discusses sources for literature on a research topic, including West Coast University library databases like Medline, Cinahl, and PubMed. It asks the reader to identify specific scholarly articles used for their topic and why they were chosen. It also prompts sharing the chosen change project with peers, including clinical questions on the topic and subtopics to guide research. The reader is asked to explain why their preceptor decided this change was needed and how it will occur.
You enter your project team meeting with Mike and Tiffany.docxstirlingvwriters
Mike and Tiffany met to discuss tools for analyzing their industry and competitors to support an upcoming board decision. Tiffany was impressed by the many options, while Mike wanted to carefully consider what information was needed. Through research, Mike and Tiffany identified some useful tools for their analysis.
Write a minimum of 200 words response to each post.docxstirlingvwriters
SoftBank, a large Japanese investment company, lacks an effective succession plan for replacing its founder and CEO Masayoshi Son. As Son's health declines, SoftBank has struggled to identify potential successors within the company who have the necessary skills and experience. Past attempts to groom outside executives as successors have failed. Effective succession planning requires developing talent internally, understanding cultural factors, and job shadowing potential successors. SoftBank's lack of succession planning could disrupt the company's culture and strategy when new leadership eventually takes over.
The document discusses Rosa's Law, a video about laws relating to the treatment of the disabled. Early laws were permissive but now laws protecting disabled individuals are mandatory. The document asks the reader to discuss similarities and differences between recent disability laws and potential positive and negative ramifications of these laws becoming mandatory.
Your software has gone live and is in the production.docxstirlingvwriters
Your software has gone live in production and is now being supported by the IT team. User acceptance testing is important for getting user feedback on the software in a real-world environment before full release to catch any remaining bugs or usability issues. Supporting software after deployment can be challenging due to needing to quickly fix any issues users encounter while preventing disruptions.
This learning was a cornucopia of enrichment with regard.docxstirlingvwriters
This week's class taught the author new skills in utilizing collaboration tools, formatting, and translation features in Microsoft Word. The author was surprised by the translation tool's usefulness for sharing work internationally. Learning these new skills will enhance the author's research documents and ability to work with colleagues around the world.
This is a school community relations My chosen school.docxstirlingvwriters
This school community relations plan is for Iowa Colony High School in Texas. The author does not currently teach at this school due to being diagnosed with Lupus and chose it as a new school to focus on. Examples were shared with the class along with instructions, and the author requests help working with the materials as they do not feel well.
This 3 page double spaced document discusses issues at HCL Technologies and the management style of Vineet. It outlines problems at HCL such as not following market trends, low employee morale leading to a 30% attrition rate, and a lack of coordination between business units. The document instructs the writer to analyze whether Vineet was a good or bad leader and to refer to a provided PPT to discuss his management style using concepts from class. The writer is only allowed to use one source, which is provided by HCL Technologies.
Sociology researches social issues through the use of theoretical.docxstirlingvwriters
1. Sociology examines social issues through theoretical frameworks like conflict theory, functionalism, and symbolic interactionism. A sociologist might ask different questions about a news story on police brutality, poverty, or sexual assault depending on which framework they use. These differing approaches combined can build a deeper understanding of the issue.
2. For a personal problem like high tuition costs or unemployment, viewing it only as personal or as influenced by public issues would lead to different ways of making sense of and finding solutions to the problem.
3. Explanations for the high U.S. college dropout rate would differ depending on a micro, meso, or macro analysis. A study might focus on the micro level of individual experiences
This document provides instructions to listen to a podcast called "Trail of Tears" from This American Life and then answer two questions about it. The questions ask what part of the story struck the reader the most and why, and why the human aspect of the Trail of Tears is often ignored in favor of just presenting the facts.
You are the newly hired Director of Risk Management for.docxstirlingvwriters
You have been hired as the new Director of Risk Management for Westview Clinical Center. Westview is facing a crisis as a recent state audit found that 85% of readmissions were due to secondary infections acquired at the hospital. Most infections were bacterial. To remain open, Westview must determine how infections are spreading, provide additional staff training, and draft a risk management plan to prevent future infections. As the new Director of Risk Management, you have been tasked with solving this problem.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
1. KD4010 Electricity, Magnetism And Electronics
Answer:
Introduction
To manage electronics effectively, they must be monitored and tested frequently. To
determine the electrical component's properties, an LCR meter is utilized. L, C, and R denote
inductance, capacitance, and resistance. The LCR meter is a high-precision meter
(Djermanova et al., 2014, pp.170-173). It's simple to harm a precision instrument if the
procedure isn't conventional, lowering the measurement accuracy. A versatile tool is used
to examine such components and characteristics when the power goes out. Its best
frequency range is 100KHz from 100Hz, making it an important tool. A quality management
system for a company that manufactures LCR meters is reported in this study.
LCR Meter Manufacturing Industry
Since 1935, Hioki has only produced electrical measuring equipment. Electrical
measurement instruments in R&D are called "mother tools" due to their relevance in
service, maintenance, and production processes. They help society grow and progress by
reflecting on technological advances and anticipating changing desires. The industry seeks
technological advancements. Hioki has a long history of experimenting with new
technologies to add value to customers.
After its founding in 1935, its business centred on mass-producing meters and testers. We
reorganized our management in 1974 and began focusing on research & development,
leading to the birth of our four product lines. As a result, cutting-edge technologies like no-
metal-contact voltage and current measuring have arisen. We can contribute to society by
creating new product groups that are the industry's tentpole by embracing unique
challenges.
LCR Management Procedures
Electronic quality control is required in the production process. Therefore, this top-level
priority directly affects industrial production standards.
2. It affects the life expectancy of your equipment. Businesses need to determine how long
their products will work for their customers to provide warranties. Unsatisfactory products
might easily add to high prices (Velychko et al., 2019, pp.171-177).
Government regulations often require it. Due to the possible danger to the lives of its users,
product quality is crucial in the automobile sector.
Quality Control Methods
Quality control can be performed in various areas during the manufacturing process,
including component selection, data processing, and process optimization.
Components
Circuit boards, which are vital to electronic systems, are constructed from various
minuscule components, which are measured using an LCR meter. The selection of
components and the assembly of the board are two areas where you may meet challenges. If
your supplier goes out of business, you want to ensure that your items are available to you
on an ongoing basis. Furthermore, it is critical to avoid the usage of counterfeit components.
These risks are mitigated by verifying the availability of components ahead of time and only
working with vendors with a proven track record in the industry.
Data
When it comes to equipment assembly, precision data is critical. Data is required to do risk
analysis and track down production line failures on a production line. This data must be
traceable throughout the entire organization to be useful. When no other standard is stated,
the electronics sector typically offers the ISO 9001 Quality Management Systems standard
as an alternative.
Processes
A standard that incorporates performance classes is the IPC-6011 Generic Performance
Specification for Printed Boards, an example of a standard that does so. There are three
categories of electronic products, each defining a maximum number of defects that can be
introduced into the system. Several standards, like J-STD-001 and IPC 610-A, can be
beneficial to electronic assembly workers since they provide guidelines for acceptable
electronic assemblies and requirements for soldered electrical and electronic assemblies.
Procedures For Quality Control
There can never be enough emphasis on the need for a quality control station on an
electronics manufacturing line. To be effective, a quality assurance strategy must include
the following procedures.
3. Taking Care Of Business In The Face Of Risk
When setbacks are eliminated, it is possible to reduce losses in the Electronics
Manufacturing industry. Therefore, it is critical to deliver products on time and meet
deadlines as part of risk management procedures. It is possible to avoid problems from
affecting the rest of the procedure and reduce liability if you go about things in this manner.
Engineers Who Have Earned Their Certification
People who work for quality control programs are only as good as the programs they
oversee. Therefore, it is critical to select the most qualified engineers with whom to
collaborate. Consider the reality that some engineers work for a variety of different
companies.
Certifications
Even though quality certifications are not required, they can help fill in the gaps left by most
quality control procedures. Certifications are intended to address the overall quality of the
equipment and the competencies of the personnel who use it. These can aid in brand
awareness by raising the company's reputation, which is beneficial for brand recognition. It
is so comparable to a service guarantee that clients are likely to be impressed as well.
The IPC Conducted An Inspection.
Many organizations rely on the International Electrotechnical Commission (IPC), a trade
organization established to standardize electronic Manufacturing, as their first line of
quality acceptance. This official body specifies the acceptable quality level (AQL) of an
electronic component, and parts that produce many defective units are rejected from use.
The First Article Has Been Approved.
The First Article Approval (FAA) procedure is used when a factory produces a batch of
products and tests the first to ensure that the products are of high quality. The entire batch
will be produced in large quantities if the test proves to be a success.
Traceability
As an added benefit, a traceability system helps ensure the safety and dependability of your
products.
LCR Meter Manufacturers' Consideration While Maintaining Quality
A manufacturer's Quality Assurance Process begins with the receipt of raw materials. From
4. the start, LCR contract manufacturers must fully engage in-house engineers to examine the
design and component needs. If the bill of materials is acceptable, the reviewer will look for
concerns: Specific circuits may require component replacements or design changes to
improve LCR performance. A high-quality circuit board cannot be built with pricey or
difficult-to-find components. Components must be withdrawn earlier than intended for
circuit board production to be affected. Replace obsolete or end-of-life parts before
Manufacturing to avoid rework. A thorough technical analysis is required for optimal circuit
board manufacture.
LCR manufacturers must use procurement workers to ensure high-quality parts are
purchased and counterfeits are prevented. This organization will have gathered an
extensive list of pre-screened part makers, distributors, and brokers.
Production environments must be clean, organized, and ready to work. In this aspect, LCR
meters are controllable. To accomplish precise LCR assembly, production equipment must
always be running at maximum capacity. Second, the contract manufacturer should be
qualified to develop your custom electronic devices. IPC-certified production technicians
should also perform soldering and other assembly techniques. Third, assembled products
containing LCR parts must meet strict quality and consistency standards (Simi?, 2014, pp.
769-773). A list of locations to check out. Rather than examining everything at the end of
the process, many inspection points should be built during LCR production. Optical
inspection equipment can detect faulty solder joints and misplaced components. To assure
the highest quality, the circuit board should be tested once designed. Lastly, an LCR contract
maker will test the board at the last circuit board assembly quality control stage. Final
Quality Checks The most typical tests are in-circuit and flying probes. Assemblers can count
on them to keep things running smoothly. Input signals come from the test system, which
uses probes to contact test sites. Look for signals to determine appropriate pin soldering. A
produced circuit board that has passed strict quality control inspections will be provided to
the customer once testing is completed if the components and circuits work as expected.
Also, quality control is a top priority at our company.
LCR Manufacturing And Testing
Producing And Testing
LCR has a state-of-the-art manufacturing facility in the United States that services the
defence industry's needs for embedded computer systems, including assembly,
manufacture, integration, and testing.
The Assemblage Of High-Quality Mechanical Parts
To provide the most reliable embedded computing devices for mission-critical defence
applications, we have a team of highly skilled, highly driven employees. To guarantee
consistency and repeatability in our products, we use formal protocols to guide every step
5. of the manufacturing, assembly, and testing processes. In addition, our production staff
teaches automated assembly procedures, and our manufacturing area is very adaptable.
They work together so that product mixtures and demand cycles can be swiftly re-adjusted.
We Are Assembling And Testing The Cables.
Our cable team's knowledge of a wide range of wire types, from discrete wire assemblies to
Quadrax cable assemblies and fibre optic cable assemblies, sets them apart from the
competition (Geurkov, 2008, pp. 1-4). A wide range of splicing, wire stripping, and crimping
operations can be performed using automated processing equipment, allowing high mix-
low volume production. All copper cable types up to 1,536 test points can be tested using
automated Fiber Optic test equipment, LC and MPO format fibre optic assemblies.
Computer Numerical Control (CNC) Machining
At LCR's machining centre, we support all of our precision ATR, 19" and custom enclosure
lines of products. LCR's expert machinists provide the finest quality outcomes in engineered
electronics packaging solutions from prototypes to entire production units.
Printing In Three Dimensions
Our ideas are supported by various early-stage prototypes and tools such as engineering
models and manufacturing components such as connectors. In addition, our staff is well-
versed in the design and fabrication process using cutting-edge printers and numerous
high-strength materials like onyx, fibreglass, Kevlar, and carbon fibre.
The Capability To Perform Environmental Testing
Engineers at LCR can perform a wide range of environmental testing, including MIL-STD-
810, 901D and 167 testing and EMI/EMC testing to MIL-STD-461, in-house and offsite. In
addition, a wide range of ambient temperatures is used for temperature testing, including a
full thermal cycle and airflow.
Systematic Testing
Our manufacturing team may perform a comprehensive set of bespoke tests to guarantee
that the system's foundational backbone is application ready for integrated system
production. An array of possibilities for signal flow analysis and data read/write
correctness can be included in testing, as can basic communications, network connectivity,
and signal I/O.
Sample Test Addresses Failures Of Lcr Meter
6. As a quality manager, there are common failures that are addressed in the manufacturing
company through critical corrections and keen consideration to ensure effective product
production; these failures are:
Test analysis failure: the most common failure is the phase and abnormal frequency tests.
Interface failure: here, the issue arises when the control system and storage medium that
are supposed to be identified fail to connect (Tran et al., 2019, pp.5727-5735).
Displayed failure: commonly occurs when the meter screen appears black or is broken.
A power failure occurs when there is an issue while turning on the LCR meter, and it cannot
turn on normally.
Critical failure corresponds to the failure of the adjustment knob or any other key to
respond.
Input terminal failure usually occurs due to abnormal signal amplitude or impedance
(Ronanki and Williamson, 2019, pp.2585-2594).
The Proper Response To LCR Meter Failures
As a company, such failures have been recognized, and to achieve our goal of providing
quality products, here are some of the responses:
Ensure there is appropriate grounding. This is suitable because it prevents static electricity
and its generation that are harmful to the operator of the LCR meter.
Ensure appropriate use of AC power with three phases in the LCR meter.
Use protective grounding conductors in autotransformers, power cords, and lead wires to
avoid protection failures.
Factory Actions To Control The Quality
Qualitative, quantitative, or semiquantitative laboratory examination methods have
different quality control procedures. The following are some of the differences between
these exams. Quantitative tests quantify the amount of an analyte present in the sample, and
precise and accurate measurements are required. A numerical value is expressed in a
specific unit of measurement (Jain et al., 2021, pp.349-353). The presence or absence of a
material or the shape of cells are examples of qualitative examinations. Positive or negative,
"reactive" or "nonreactive" are adjectives used to describe the outcomes rather than
numerical ones. Other terms used to describe the results include "normal" and "abnormal,"
and "growth" or "no growth." There are two types of qualitative examinations:
semiquantitative and quantitative.
However, the difference is that a substance's concentration is estimated using these assays.
When they put in place quality control measures, they can keep an eye on the
manufacturing process. Process control includes quality control (QC), an integral part of any
quality management system. Testing system faults can be detected and corrected using this
software, which keeps track of everything that happens during the examination part of the
test. The failure of the testing system, unfavourable environmental circumstances, or poor
7. performance by the operator could all be to blame. Before patient findings are given, QC
gives the lab peace of mind that test results are correct and dependable. In addition, there
are two types of controls: those that contain the analyte and those that do not. Patients'
samples and controls are tested simultaneously and in the same way. The control's goal is to
verify the test system's dependability and assess the operator's skills and any external
factors that could affect the results.
Once the proper control materials are procured or developed, the following step is to define
the acceptable range for the control material. This will let the lab know if the test run is "in
control" or if the control variables are not reading correctly—"out of control". Repeated
assays of the control material are used to achieve this goal. To facilitate daily monitoring,
the laboratory will find it extremely helpful to display the range graphically once the
necessary control value ranges have been defined. Levey–Jennings charts are frequently
used (Pokatilov al., 2010, (pp. 408-409). A QC sample can now determine if daily runs are
"in control" by comparing it to the patient samples. A control sample must accompany each
set of patient samples. Furthermore, the use of quality control data Experiments is labelled
as "out of control" when their quality control sample fails to meet predetermined standards.
In summary, I recommend the following concerning our company's efforts to secure high-
quality LCR meter reading equipment. Clients now receive the specifications papers before
operations by providing operation guidelines and specific requirements. Not only does this
help novice users, but it also helps experienced users avoid power outages. Clients' faith in a
product's quality is built and maintained when certified. For the product to be made, flaws
and other failures must be discovered, corrected and used for the proper purpose.
References
Ronan, D. and Williamson, S.S., 2019. Failure prediction of submodule capacitors in the
modular multilevel converter by monitoring the intrinsic capacitor voltage fluctuations.
IEEE Transactions on Industrial Electronics, 67(4), pp.2585-2594.
Geurkov, V.L., 2008, June. Built-in self-test for direct-conversion digital LCR-meters. In 2008
IEEE 14th International Mixed-Signals, Sensors, and Systems Test Workshop (pp. 1-4). IEEE.
Simi?, M., 2014, October. Realization of digital LCR meter. In 2014 International Conference
and Exposition on Electrical and Power Engineering (EPE) (pp. 769-773). IEEE.
Velychko, O., Shevkun, S. and Dobroliubova, M., 2019. Features of Calibration of Precision
LCR Meters. Sensors & Transducers, 237(9/10), pp.171-177.
Pokatilov, A., Satrapinski, A., Kübarsepp, T. and Märtens, O., 2010, June. Verification of
performance of commercial LCR meters. In CPM 2010 (pp. 408-409). IEEE.
8. Tran, N.T.M., D’Elia, V., Callegaro, L. and Ortolano, M., 2019. A capacitance build-up method
to determine LCR meter errors and capacitance transfer. IEEE Transactions on
Instrumentation and Measurement, 69(8), 5727-5735.
Djermanova, N.J., Kiss’ovski, J.G. and Vatchkov, V.A., 2014. Portable Arduino-Based LCR–
Meter. Annual Journal Of Electronics, pp.170-173.
Jain, P., Kumar, S., Mandal, J., Singh, N., Biswas, J.C. and Saxena, A.K., 2021. Determination of
Inductance through capacitance using commercial LCR Meters. JAPAN, 36(2), pp.349-353.