This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...fjsjjekdkme
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor which involve installing components like the shaft assembly, cam plate, barrel assembly, brake piston and head in the reverse order of disassembly. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...fjsjjekdkme
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor which involve installing components like the shaft assembly, cam plate, barrel assembly, brake piston and head in the reverse order of disassembly. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325C excavator. The disassembly procedure involves 27 steps to remove components like the head, check valves, fittings, seals, brake piston, friction plates, barrel assembly, and shaft assembly. The assembly procedure describes 21 steps and includes applying seals and lubricants to reinstall the components in reverse order of disassembly. Special care must be taken with alignment marks and component positions during reassembly.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then describes 26 steps for reassembling the travel motor, providing details on cleaning, lubricating and properly installing each part in the reverse order of disassembly. Safety notices are included to handle fluids properly and avoid damaging components.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...fjsjjekdkme
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and begins by instructing the user to first remove the crankshaft by following the procedure in another document. The removal procedure then instructs the user to use a bearing puller and hydraulic pump to pull the gear off the crankshaft. The installation procedure is not shown, but presumably provides instructions for pressing the gear back onto the crankshaft.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area, inspecting components, draining fluids, cleaning parts, applying lubricants, and ensuring proper tightening of fasteners. Special attention should be given to sliding surfaces, seals, and markings for reassembly. Tools and loose parts should be accounted for after completion. Floating seals and nylon slings require special handling to prevent damage or improper installation.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Caterpillar cat 325 b excavator (prefix 6dn) service repair manual (6dn00001 ...fjsjjekdkme
This service repair manual provides instructions for removing and installing inlet manifolds, valves, and valve guides on Caterpillar 325B and 325B LN excavator engines. The document outlines the required tools and safety procedures, and provides step-by-step instructions with illustrations for each repair procedure. Technicians are advised to keep parts clean, contain fluids properly, and refer to other documents for guidance on reusable components.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
The document provides instructions for removing and installing inlet and exhaust valve seat inserts on a 325-A excavator. It lists the required tools and gives a step-by-step process that includes using a valve seat extractor tool to remove the inserts from the cylinder head and installing new inserts. Safety notices are included to keep parts clean and contain fluids.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
Clark np246 forklift service repair manualfjskksmem
This document is a service manual for Clark NP/NS 300 C&D trucks. It contains safety information and procedures for maintenance, repairs, inspections and adjustments. The manual is divided into groups by component (such as batteries, brakes, hydraulics etc.) with detailed instructions for maintenance and repairs. Safety practices for users and maintenance personnel are provided, with warnings about ensuring safety during procedures like raising/blocking the truck, relieving hydraulic pressure, and inflating tires.
Caterpillar cat 432 d backhoe loader (prefix tdr) service repair manual (tdr0...ujfdjjskkemme
This document provides instructions for removing and assembling components of a Caterpillar 3054C engine, including the cylinder head. The removal procedure for the cylinder head involves first draining fluids, removing related components like the exhaust manifold and fuel injectors, and then loosening and removing mounting screws to lift the cylinder head off the engine block. Proper care is emphasized to prevent damage to parts and contain fluids during disassembly.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fjjskekfksmem
This document contains sections from three shop manuals for a wheel loader. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, maintenance and repair instructions, testing procedures, and troubleshooting guides. Precautions for disassembling and reassembling components are outlined, including cleaning parts, applying lubricants, replacing seals, and ensuring no tools are left inside after reassembly. Floating seal installation and precautions are also described.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fujjsjejkekmmd
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly and taking careful measurements. Detailed diagrams and part numbers are referenced throughout.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fujsefjfkksekem
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fdusjejkskem
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)ufjjsjefkksemm
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly, applying lubricants correctly, and taking care not to damage sealing surfaces. Floating seals require special care during reuse to avoid oil leakage or damage.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fusjejfkskemme
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fjskekqwefsmemm
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly and taking careful measurements. Detailed diagrams and part numbers are referenced throughout.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fhjskemme
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325C excavator. The disassembly procedure involves 27 steps to remove components like the head, check valves, fittings, seals, brake piston, friction plates, barrel assembly, and shaft assembly. The assembly procedure describes 21 steps and includes applying seals and lubricants to reinstall the components in reverse order of disassembly. Special care must be taken with alignment marks and component positions during reassembly.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then describes 26 steps for reassembling the travel motor, providing details on cleaning, lubricating and properly installing each part in the reverse order of disassembly. Safety notices are included to handle fluids properly and avoid damaging components.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...fjsjjekdkme
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and begins by instructing the user to first remove the crankshaft by following the procedure in another document. The removal procedure then instructs the user to use a bearing puller and hydraulic pump to pull the gear off the crankshaft. The installation procedure is not shown, but presumably provides instructions for pressing the gear back onto the crankshaft.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area, inspecting components, draining fluids, cleaning parts, applying lubricants, and ensuring proper tightening of fasteners. Special attention should be given to sliding surfaces, seals, and markings for reassembly. Tools and loose parts should be accounted for after completion. Floating seals and nylon slings require special handling to prevent damage or improper installation.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Caterpillar cat 325 b excavator (prefix 6dn) service repair manual (6dn00001 ...fjsjjekdkme
This service repair manual provides instructions for removing and installing inlet manifolds, valves, and valve guides on Caterpillar 325B and 325B LN excavator engines. The document outlines the required tools and safety procedures, and provides step-by-step instructions with illustrations for each repair procedure. Technicians are advised to keep parts clean, contain fluids properly, and refer to other documents for guidance on reusable components.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
The document provides instructions for removing and installing inlet and exhaust valve seat inserts on a 325-A excavator. It lists the required tools and gives a step-by-step process that includes using a valve seat extractor tool to remove the inserts from the cylinder head and installing new inserts. Safety notices are included to keep parts clean and contain fluids.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
Clark np246 forklift service repair manualfjskksmem
This document is a service manual for Clark NP/NS 300 C&D trucks. It contains safety information and procedures for maintenance, repairs, inspections and adjustments. The manual is divided into groups by component (such as batteries, brakes, hydraulics etc.) with detailed instructions for maintenance and repairs. Safety practices for users and maintenance personnel are provided, with warnings about ensuring safety during procedures like raising/blocking the truck, relieving hydraulic pressure, and inflating tires.
Caterpillar cat 432 d backhoe loader (prefix tdr) service repair manual (tdr0...ujfdjjskkemme
This document provides instructions for removing and assembling components of a Caterpillar 3054C engine, including the cylinder head. The removal procedure for the cylinder head involves first draining fluids, removing related components like the exhaust manifold and fuel injectors, and then loosening and removing mounting screws to lift the cylinder head off the engine block. Proper care is emphasized to prevent damage to parts and contain fluids during disassembly.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fjjskekfksmem
This document contains sections from three shop manuals for a wheel loader. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, maintenance and repair instructions, testing procedures, and troubleshooting guides. Precautions for disassembling and reassembling components are outlined, including cleaning parts, applying lubricants, replacing seals, and ensuring no tools are left inside after reassembly. Floating seal installation and precautions are also described.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fujjsjejkekmmd
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly and taking careful measurements. Detailed diagrams and part numbers are referenced throughout.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fujsefjfkksekem
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fdusjejkskem
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)ufjjsjefkksemm
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly, applying lubricants correctly, and taking care not to damage sealing surfaces. Floating seals require special care during reuse to avoid oil leakage or damage.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fusjejfkskemme
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fjskekqwefsmemm
This document contains sections from three shop manuals for a wheel loader. It includes information on general specifications, component layout, disassembly and reassembly, operational performance testing, and troubleshooting. Precise instructions are provided for disassembling and reassembling components, with an emphasis on cleaning parts thoroughly and taking careful measurements. Detailed diagrams and part numbers are referenced throughout.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)fhjskemme
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95 z7b wheel loader service repair manual (serial no. 97j2 5001 and up)ufujsjejfjkkekm
This document contains shop manuals for a wheel loader model 95Z7B. It includes sections on general information, function and structure, disassembly and reassembly, operational performance tests, and troubleshooting. The manuals provide specifications, component layouts, disassembly and assembly procedures, maintenance standards, and testing and troubleshooting guides. They apply to wheel loaders powered by an Isuzu 6WG1 engine with serial numbers 97J2-5001 and above. The manuals are intended to guide maintenance and repair of the wheel loader.
Kawasaki 95Z7B Wheel Loader Service Repair Manual (Serial No. 97J2-5001 and u...fjdkksmmdm
This document contains shop manuals for a wheel loader model 95Z7B powered by an Isuzu 6WG1 engine. It includes sections on general information, function and structure, disassembly and reassembly, operational performance testing, and troubleshooting. The manuals provide information on specifications, component layout, maintenance procedures, testing, and troubleshooting to technicians servicing the wheel loader. Precautions are outlined for tasks like disassembling and assembling components, bleeding hydraulic and fuel systems, and releasing pressures. Component operation, specifications, and maintenance standards are also defined. Diagrams of hydraulic, electrical, and other systems are provided as attachments.
Kawasaki 95Z7B Wheel Loader Service Repair Manual (Serial No. 97J2-5001 and u...f8uusejkdkdm
This document contains shop manuals for a wheel loader model 95Z7B powered by an Isuzu 6WG1 engine. It includes sections on general information, function and structure, disassembly and reassembly, operational performance testing, and troubleshooting. The manuals provide information on specifications, component layout, maintenance procedures, testing, and troubleshooting to technicians servicing the wheel loader. Precautions are outlined for tasks like disassembling and assembling components, bleeding hydraulic and fuel systems, and releasing pressures. Component operation, specifications, and maintenance standards are also defined. Diagrams of hydraulic, electrical, and other systems are provided as attachments.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fikkskemdmd
The document provides instructions and guidelines for disassembling and assembling a 95Z7 wheel loader, including precautions for different components, proper tightening procedures, and releasing hydraulic pressures. It details sections on general information, maintenance standards, the body components, travel systems, and front attachments of the wheel loader.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fiskkdmmd
This document provides summaries of sections and groups from a shop manual for a wheel loader. It includes:
1. General information on precautions for disassembling and assembling parts, tightening specifications, painting, bleeding air, and pressure release procedures.
2. Maintenance standards for the body and front attachment.
3. Details on disassembling and assembling various body components like the cab, counterweight, engine, and hydraulic and electrical systems.
4. Information on testing operational performance and troubleshooting issues.
The manual provides technicians with guidance on servicing and repairing the wheel loader in a safe and proper manner. It covers removing, inspecting, and reinstalling various
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)ufjjdfkkskemm
This document is a shop manual for a 95Z7 wheel loader powered by an Isuzu 6WG1 engine. It contains sections and groups that cover general information, maintenance standards, disassembly and reassembly of the machine body, travel system, and front attachment. The general information section includes precautions for disassembling and assembling the machine, as well as procedures for tasks like tightening, painting, bleeding air, and releasing pressures. The maintenance standards section establishes dimensions and specifications. The remaining sections provide guidance on disassembling and reassembling various components and systems of the wheel loader.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fdhjsekdme
This document provides summaries of sections and groups from a shop manual for a wheel loader model 95Z7 powered by an Isuzu 6WG1 engine. It includes sections on general information, maintenance standards, the vehicle body, travel system, and front attachment. The general information section covers precautions for disassembling and assembling the vehicle, tightening specifications, painting, bleeding air from systems, and pressure release procedures. It aims to provide technicians all necessary information and safety guidelines for repairing and servicing the wheel loader.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)jfjkskekfsielkm
This document provides summaries of sections and groups from a shop manual for a wheel loader model 95Z7 powered by an Isuzu 6WG1 engine. It includes sections on general information, maintenance standards, the vehicle body, travel system, and front attachment. The general information section covers precautions for disassembling and assembling the vehicle, tightening specifications, painting, bleeding air from systems, and pressure release procedures. It aims to provide technicians all necessary information and safety procedures for maintenance, repair and troubleshooting of the 95Z7 wheel loader.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fusjejfjskekem
This document is a shop manual for a 95Z7 wheel loader powered by an Isuzu 6WG1 engine. It contains sections and groups that cover general information, maintenance standards, disassembly and reassembly of the body components, the travel system, and the front attachment. The general information section includes precautions for disassembling and assembling, tightening specifications, painting, bleeding air, pressure release procedures, and preparation. It provides guidance on correctly handling components during maintenance.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fusjefjkskem
This document is a shop manual for a 95Z7 wheel loader powered by an Isuzu 6WG1 engine. It contains sections and groups that cover general information, maintenance standards, disassembly and reassembly of the body components, the travel system, and the front attachment. The general information section includes precautions for disassembling and assembling, tightening specifications, painting, bleeding air, pressure release procedures, and preparation. It provides guidance on correctly handling components during maintenance.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fusjjfskekmem
This document is a shop manual for a 95Z7 wheel loader powered by an Isuzu 6WG1 engine. It contains sections and groups that cover general information, maintenance standards, disassembly and reassembly of the body components, the travel system, and the front attachment. The general information section includes precautions for disassembling and assembling, tightening specifications, painting, bleeding air, pressure release procedures, and preparation. It provides guidance on correctly handling components during maintenance.
Kawasaki 95 z7 wheel loader service repair manual (serial no. 97j1 9001 and up)fjsiefkkskemm
This document provides summaries for sections and groups of a shop manual for a wheel loader. It includes:
- A table of contents listing sections and groups related to maintenance, disassembly/reassembly, operational performance testing, and troubleshooting.
- Precautions and procedures for disassembling and assembling parts safely and properly, including cleaning, inspection, tool preparation, matching marks, and lubrication.
- Guidelines for tasks like bleeding air, pressure release, and preparation for inspection/maintenance.
- Sections cover general information, maintenance standards, the vehicle body, travel system, and front attachment.
- Testing includes engine, machine performance, and component tests as well as adjustments.
-
Similar to Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up) (20)
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...f98soeodidkdk
This service repair manual provides instructions for disassembling and assembling the main control valve for 325, 325L, and 325N excavator models. It lists 33 detailed steps to fully disassemble the main control valve and its various components. Identification marks should be placed on parts as they are removed. Cleanliness and lubrication of internal parts is important during the process.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...f98soeodidkdk
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and steps to remove the crankshaft first before removing the gear using a bearing puller. The installation procedure is not described.
Caterpillar cat 325 c ln excavator (prefix csj) service repair manual (csj000...f98soeodidkdk
This document provides instructions for disassembling and assembling the travel motor of 325C excavator models. The disassembly procedure involves 27 steps to remove components like the head, brake piston, barrel assembly, and shaft assembly. The assembly procedure describes 22 steps including installing seals, plates, springs and ensuring proper alignment of components like the cam plate and keys. Special care must be taken when handling components and aligning parts to prevent damage during reassembly.
Caterpillar cat 325 c ln excavator (prefix crb) service repair manual (crb000...f98soeodidkdk
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...f98soeodidkdk
This document provides the disassembly and assembly procedures for a 325C excavator travel motor. The disassembly procedure involves 27 steps to remove all components from the travel motor body. The assembly procedure describes 22 steps to reinstall all components in the reverse order, ensuring proper installation of seals, plates, springs and other parts. Precise alignment marks and original component positions are critical to correctly reassemble the travel motor.
Caterpillar cat 325 c l excavator (prefix crb) service repair manual (crb0000...f98soeodidkdk
The document provides instructions for removing and installing various engine components on a 325C excavator, including:
1. Removing the camshaft by wiring the valve lifters away, removing retaining bolts, and lifting the camshaft out.
2. Installing the camshaft by carefully lowering it into place while ensuring proper timing marks are aligned.
3. Removing the camshaft bearings using a special tool, and installing new bearings while orienting the oil holes correctly.
Caterpillar cat 325 c excavator (prefix csj) service repair manual (csj00001 ...f98soeodidkdk
This document provides instructions for disassembling and assembling the travel motor of 325C excavator models. The disassembly procedure involves 27 steps to remove components like the head, brake piston, barrel assembly, springs and seals. The assembly procedure consists of 26 steps and requires applying sealant and hydraulic oil, and ensuring components like keys and locating pins are correctly installed. Special care must be taken to avoid damage and keep identification marks aligned during the process.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...f98soeodidkdk
The document provides instructions for removing and installing various engine components on a 325C excavator, including:
1. Removing the camshaft by wiring the valve lifters away, removing retaining bolts, and lifting the camshaft out.
2. Installing the camshaft by carefully inserting it into place while ensuring proper timing marks are aligned.
3. Removing the camshaft bearings using a special tool, and installing new bearings by orienting the oil holes and positioning joints.
Caterpillar cat 325 b track type excavator (prefix 8pr) service repair manual...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b ln excavator (prefix 8fn) service repair manual (8fn000...f98soeodidkdk
This document provides instructions for removing and servicing components of the rocker shaft and cylinder head on a 325B and 325B LN Excavator powered by a 3116 engine. The procedures include removing the rocker shaft assembly, disassembling the rocker shaft, inspecting components, assembling the rocker shaft, installing the rocker shaft and pushrods, and removing the cylinder head. Detailed steps are provided along with illustrations to guide the technician through the process while maintaining cleanliness and proper torque specifications.
Caterpillar cat 325 b ln excavator (prefix 6dn) service repair manual (6dn000...f98soeodidkdk
This document provides instructions for removing and installing inlet manifold components on a Caterpillar 325B excavator engine. The summary is:
1. Remove the valve mechanism cover and disconnect any attached pipes or solenoids from the inlet manifold.
2. Remove bolts securing the inlet manifold and remove the manifold and gasket.
3. To install the inlet manifold, position a new gasket and manifold on the engine and secure with bolts, reconnecting any pipes or solenoids.
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b l excavator (prefix 8rr) service repair manual (8rr0000...f98soeodidkdk
This document provides assembly instructions for the final drive of an excavator model 325B L. It describes:
1) Cleaning and preparing the final drive components and installing bearings in the main housing.
2) Determining the correct bearing preload and shim thickness to set the gear mesh.
3) Installing seals in the main housing and motor housing.
4) Assembling the carrier assemblies, installing gears, shafts, and retaining rings.
5) Positioning the main housing, gear, and ring gear on the motor housing and securing with bolts.
Caterpillar cat 325 b l excavator (prefix 6dn) service repair manual (6dn0000...f98soeodidkdk
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 325B L excavator engine. It describes:
- Disconnecting air inlet piping and removing bolts to detach the manifold
- Installing a new gasket and reattaching the manifold using bolts torqued to 28 Nm
- Reconnecting any disconnected components at the end of the process
Caterpillar cat 325 b l excavator (prefix 2jr) service repair manual (2jr0000...f98soeodidkdk
This document provides instructions for installing pistons and connecting rods in a 3116 engine. It describes cleaning and lubricating parts, inserting piston rings into the cylinder bore using a compressor tool, installing each piston and connecting rod assembly by aligning it with the crankshaft, and torquing the connecting rod cap bolts. References are provided for determining whether pistons, connecting rods, pins, and bushings can be reused.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...f98soeodidkdk
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It outlines 27 steps to disassemble the various components of the travel motor including removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. It then describes the 25 steps to reassemble these components, noting the proper order and orientation needed to ensure correct assembly. Precautions are highlighted such as applying identification marks and cleaning components thoroughly before assembly.
Caterpillar cat 325 b l excavator (prefix 1gs) service repair manual (1gs0000...f98soeodidkdk
The document provides disassembly and assembly instructions for the final drive of a 325B L excavator. It details 33 steps to disassemble the final drive components including removing carriers, gears, seals and bearings. It also outlines 28 steps for reassembling the final drive, including pressing in bearings, determining the correct shim thickness, installing seals and gears, and torquing bolts. Tools and torque specifications are provided. The purpose is to provide maintenance technicians with a procedure to fully disassemble and reassemble the excavator's final drive system.
Caterpillar cat 325 b excavator (prefix 8rr) service repair manual (8rr00001 ...f98soeodidkdk
This document provides assembly instructions for the final drive of an excavator model 325B L. It describes:
1) Cleaning and preparing the components, installing bearings in the main housing, and determining the correct shim thickness for the gear.
2) Installing seals in the main housing and motor housing.
3) Assembling the carrier assembly by installing planetary gears, shafts, and pins.
4) Positioning the main housing, gear, and ring gear on the motor housing and securing them with bolts.
Caterpillar cat 325 b excavator (prefix 8gm) service repair manual (8gm00001 ...f98soeodidkdk
This document provides instructions for disassembling and assembling the mechanical actuated fan on an excavator model 325B. It describes removing the fan blades, mounting hardware, oil, and performing a pressure test on the hub assembly. Further steps include removing the bellcrank, control shaft, hub assembly, through shaft, carrier/spool, main bearing, and rear seal. Detailed illustrations accompany each step to aid in failure analysis and repair.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...f98soeodidkdk
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
3. SECTION AND GROUP
CONTENTS
WORKSHOP MANUAL
All information, illustrations and
specifications in this manual are based on
the latest product information available
at the time of publication. The right is
reserved to make changes at any time
without notice.
SECTION 1 GENERAL INFORMATION
Group 1 Precautions for Disassembling and
Assembling
Group 2 Tightening
Group 3 Painting
Group 4 Bleeding Air
Group 5 Pressure Release Procedure
Group 6 Preparation
SECTION 2 MAINTENANCE STANDARD
Group 1 Body
Group 2 Front Attachment
SECTION 3 BODY
Group 1 Cab
Group 2 Counterweight
Group 3 Center Hinge
Group 4 Engine
Group 5 Radiator Assembly
Group 6 Hydraulic Oil Tank
Group 7 Fuel Tank
Group 8 Pump Device
Group 9 Control Valve
Group 10 Pilot Valve
Group 11 Brake Charge Valve
Group 12 Manifold Valve
Group 13 Solenoid Valve
Group 14 Flow Regulator Valve
Group 15 Cooling Fan System
Group 16 Exhaust Filter
Group 17 Ride Control Device
Group 18 Battery Disconnect Switch
93209-00601
4. SECTION AND GROUP
CONTENTS
WORKSHOP MANUAL
All information, illustrations and
specifications in this manual are based on
the latest product information available
at the time of publication. The right is
reserved to make changes at any time
without notice.
SECTION 4 TRAVEL SYSTEM
Group 1 Tire
Group 2 Drive Unit
Group 3 Axle
Group 4 Propeller Shaft
Group 5 Brake Valve
Group 6 Steering Device
Group 7 Steering Valve
Group 8 Steering Cylinder
Group 9 Secondary Steering Device
Group 10 Stop Valve
SECTION 5 FRONT ATTACHMENT
Group 1 Front Attachment
Group 2 Cylinder
5. 93209-00590
March 2013
80Z7
SHOP MANUAL
(Operational Performance Test & Troubleshooting)
INTRODUCTION........................................................................................................................... IN-01~02
Symbol and Abbreviation...............................................................................................................SY-1~2
SECTION 4 OPERATIONAL PERFORMANCE TEST
Group 1 Introduction .............................................................................................................T4-1-1
Group 2 Standard..................................................................................................................T4-2-1
Group 3 Engine Test..............................................................................................................T4-3-1
Group 4 Machine Performance Test .....................................................................................T4-4-1
Group 5 Component Test......................................................................................................T4-5-1
SECTION 5 TROUBLESHOOTING
Group 1 Diagnosing Procedure ............................................................................................T5-1-1
Group 2 Monitor ....................................................................................................................T5-2-1
Group 4 Component Layout..................................................................................................T5-4-1
Group 5 Troubleshooting A ...................................................................................................T5-5-1
Group 6 Troubleshooting B...................................................................................................T5-6-1
Group 7 Air Conditioner ........................................................................................................T5-7-1
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
6. 80Z7 D&R
Group 1 Precautions for Disassembling and
Assembling
Precautions for Disassembling and
Assembling.................................................................W1-1-1-1
Group 2 Tightening
Tightening Bolts and Nuts..........................................W1-2-1-1
Piping Joint ......................................................................W1-2-1-4
Group 3 Painting
Painting .............................................................................W1-3-1-1
Group 4 Bleeding Air
Bleeding Air from Hydraulic Oil Tank......................W1-4-1-1
Bleeding Air from Hydraulic System.......................W1-4-1-2
Bleeding Air from Fuel System..................................W1-4-1-3
Bleeding Air from Radiator.........................................W1-4-1-4
Bleeding Air from Brake (Axle)..................................W1-4-1-5
Group 5 Pressure Release Procedure
Front Attachment Hydraulic Circuit Pressure
Release Procedure....................................................W1-5-1-1
Ride Control Accumulator Pressure Release
Procedure....................................................................W1-5-1-2
Parking Brake Accumulator Pressure Release
Procedure....................................................................W1-5-1-3
Group 6 Preparation
Preparation before Inspection and
Maintenance ..............................................................W1-6-1-1
SECTION 1
GENERAL
CONTENTS
7. W1-1-1-1
SECTION 1 GENERAL
Group 1 Precautions for Disassembling and Assembling
Precautions for Disassembling and
Assembling
Precautions for Disassembling
y Clean the Machine
Thoroughly wash the machine before bringing it
into the shop. Bringing a dirty machine into the shop
may cause machine components to be contaminated
during disassembling / assembling, resulting in
damage to machine components, as well as decreased
efficiency in service work.
y Inspect the Machine
Be sure to thoroughly understand all disassembling
/ assembling procedures beforehand to help avoid
incorrect disassembling of components as well as
personal injury.
Check and record the items listed below to prevent
problems from occurring in the future.
x The machine model, machine serial number, and
hour meter reading.
x Reason for disassembly (symptoms, failed parts, and
causes).
x Clogging of filters and oil, water or air leaks, if any.
Capacities and condition of lubricants.
x Loose or damaged parts.
y Prepare and Clean Tools and Disassembly Area
Prepare the necessary tools to be used and the area for
disassembling work.
Precautions for Disassembling and Assembling
y Precautions for Disassembling
x Cap the open ends in case the hoses and pipes
have been disconnected. In addition, attach an
identification tag onto the connectors, hoses, and
pipes for assembling.
x Before disassembling, clean the exterior of the
components and place on a workbench.
x Drain hydraulic oil and gear oil from the hydraulic
components and reduction gear.
x Be sure to provide appropriate containers for
draining fluids.
x Use matching marks for easier reassembling if
necessary.
x Be sure to use the specified special tools when
instructed.
x If a part or component cannot be removed after
removing its securing nuts and bolts, do not attempt
to remove it forcibly. Find the cause (s), then take the
appropriate measures to remove it.
x Orderly arrange disassembled parts. Mark and tag
them if necessary.
x Store common parts, such as bolts and nuts with
reference to where they are to be used and in a
manner that will prevent loss.
x Inspect the contact or sliding surfaces of
disassembled parts for abnormal wear, sticking, or
other damage.
x Measure and record the degree of wear and
clearances.
y Precautions for Assembling
x Be sure to clean all parts and inspect them for any
damage. If any damage is found, repair or replace
part.
x Dirt or debris on the contact or sliding surfaces may
shorten the service life of the machine. Take care not
to contaminate any contact or sliding surfaces.
x Apply appropriate lubricant oil onto parts in order to
prevent them from seizing.
x Be sure to replace O-rings, backup rings, oil seals, and
floating seals with new ones once they have been
disassembled. Apply grease before installing
x Be sure that liquid-gasket-applied surfaces are clean
and dry.
x If an anti-corrosive agent has been used on a new
part, be sure to thoroughly clean the part to remove
the agent.
x Fit the matching marks made when disassembling
and assemble them.
x Be sure to use the designated tools to assemble
bearings, bushings, and oil seals.
x Keep a record of the number of tools used for
disassembly / assembly. After assembling is
completed, count the number of tools so as to make
sure that no forgotten tools remain in the assembled
machine.
8. Group 1 Precautions for Disassembling and Assembling
SECTION 1 GENERAL
W1-1-1-2
Precautions for Using Floating Seal
1. In general, replace the floating seal with a new one
after disassembling.
If the floating seal is required to be reused, follow
these procedures:
x Keep seal rings together as a matched set with seal
ring (1) surfaces together. Apply oil onto sliding
surface (e) of seal ring (1).
x Check sliding surface (e) of seal ring (1) for scuffing,
scoring, corrosion, deformation, or uneven wear.
Check the step part of seal ring (1).
x Check O-ring (2) for tears, breaks, deformation, or
hardening.
2. If incorrectly assembled, oil leakage or damage
will occur. Be sure to do the following to prevent
trouble.
x Clean the floating seal and seal mounting bores with
cleaning solvent.
Use a wire brush to remove mud, rust, or dirt from
seal mounting bores. After cleaning, thoroughly dry
parts with compressed air.
x Clean seal ring (1) and O-ring (2) mounting bores.
Check the bore surface for scuffing or scoring by
touching the surface with finger.
x After installing the floating seal, check that O-ring (2)
is not twisted, and that it is installed correctly on seal
ring (1).
x After installing the floating seal, check that O-ring
(2) and seal ring sliding surface (e) is parallel with
seal mating surface (f) by measuring the distances
(e) and (f) at point (A) and (B), as illustrated. If these
distances differ, correct O-ring (2) seating.
1
2
a
b
c
d
a - Correct
b - Incorrect
c - Twist of O-Ring
d - Bend of O-Ring
a - Correct
b - Incorrect
e - Sliding Surface
f - Seal Mating Surface
f
e
2
a A A
B B
b
A=B A≠B
W178-02-11-001
W178-02-11-002
W178-02-11-003
9. Group 1 Precautions for Disassembling and Assembling
SECTION 1 GENERAL
W1-1-1-3
Precautions for Using Nylon Sling
1. Follow the precautions below to use nylon slings
safely.
x Attach protectors (soft material) on the corners of
the load so that the nylon sling does not directly
contact the corners. This will prevent the nylon
sling from being damaged and the lifted load from
slipping.
x Lower the temperature of the lifted load to lower
than 100 °C (212 °F). If unavoidably lifting a load with
a temperature of 100 °C (212 °F) or more, reduce the
load weight.
x Do not lift acid or alkali chemicals.
x Take care not to allow the sling to become wet. The
load may slip.
x When required to use more than one sling, use slings
with the same width and length to keep the lifted
load balanced.
x When lifting a load using an eyehole, be sure to
eliminate any gaps between the sling and load.
(Refer to the right illustration.) Reduce the load
weight so that it is less than 80 % of the sling
breaking force.
x Avoid using twisted, bound, connected, or hitched
slings.
x Do not place any object on twisted or bent slings.
(Refer to the right illustration.)
x When removing the slings from under the load, take
care not to damage the nylon slings. Avoid contact
with protrusions.
x Avoid dragging slings on the ground, throwing
slings, or pushing slings with a metal object.
x When using with other types of slings (wire rope) or
accessories (shackle), protect the joint so that the
nylon sling is not damaged.
x Store the nylon slings indoors so that they won’t
deteriorate with heat, sun light, or chemicals.
a
b
c
a - Correct Eyehole Lifting
Method
b - Incorrect Eyehole Lifting
Method
c - Bent of Sling
W102-04-02-016
W105-04-01-008
W162-01-01-009
10. Group 1 Precautions for Disassembling and Assembling
SECTION 1 GENERAL
W1-1-1-4
CAUTION: If a load is lifted with a damaged
nylon sling, serious personal injury may result.
Be sure to visually check the nylon sling for any
damage before using.
2. Before using a nylon sling, visually check the nylon
sling for any damage corresponding to examples
shown to the right. If any damage is found, cut and
discard the sling.
Even if no damage is found, do not use slings older
than 7 years.
Damaged Appearance a
a
a
e
f
b
b
c
c
g
d
a - Broken Sewing Thread a - Broken Sewing Thread e - Separation of Belt
b - Scuffing f - Scoring
b - Scuffing
c - Fuzz d - Broken Sewing Thread
c - Fuzz g - Broken Warp
a - Broken Sewing Thread
W162-01-01-002
W162-01-01-003
W162-01-01-004
W162-01-01-005
W162-01-01-006
W162-01-01-007
W162-01-01-008
11. Group 1 Precautions for Disassembling and Assembling
SECTION 1 GENERAL
W1-1-1-5
Maintenance Standard Terminology
“Standard”
1. Dimension for parts on a new machine.
2. Dimension of new components or assemblies
adjusted to specification. Allowable errors will be
indicated if necessary.
“Allowable Limit”
1. Normal machine performance cannot be
accomplished after exceeding this limit.
2. Repair or adjustment is difficult after exceeding this
limit.
3. Repair or adjustment is impossible after exceeding
this limit.
Therefore, in consideration of operation efficiency
and maintenance expense, proper maintenance
shall be carried out before reaching the“Allowable
Limit”.
12. SECTION 1 GENERAL
W1-2-1-1
Group 2 Tightening
Tightening Bolts and Nuts
CAUTION: Use tools appropriate for the work
to be done. Makeshift tools and procedures
can create safety hazards. For loosening and
tightening nuts and bolts, use correct size tools.
Otherwise, tightening tools may slip, potentially
causing personal injure.
IMPORTANT:
y
Apply lubricant to the bolts and nuts in order
to reduce friction coefficient of them. (For
example, spindle oil with white zinc B dissolved
in it)
y
Clean the bolt and nut threads and remove dirt
or corrosion before installing.
Bolt Types
Tighten the nuts or bolts correctly to the torque
specifications.
As the different types and grades of bolt are used,
use and tighten the correct bolts correctly when
assembling the machine or components.
Specified Tightening Torque Chart
2013/09
Bolt
Dia.
mm
Hexagon Head Bolt Socket Bolt
Wrench
Size mm
Socket Bolt Wrench
Size mm
N·m (lbf·ft) N·m (lbf·ft) N·m (lbf·ft) N·m (lbf·ft)
6 3 to 4 (2.2 to 3) 10 5
8 30 (22) 20 (15) 10 (7.4) 13 20 (15) 6
10 65 (48) 50 (37) 20 (15) 17 50 (37) 8
12 110 (81) 90 (66) 35 (26) 19 90 (66) 10
14 180 (133) 140 (103) 55 (41) 22 140 (103) 12
16 270 (200) 210 (155) 80 (59) 24 210 (155) 14
18 400 (300) 300 (220) 120 (89) 27 300 (220) 14
20 550 (410) 400 (300) 170 (125) 30 400 (300) 17
22 750 (550) 550 (410) 220 (162) 32
24 950 (700) 700 (520) 280 (205) 36
27 1400 (1030) 1050 (770) 400 (300) 41
30 1950 (1440) 1450 (1070) 550 (410) 46
33 2600 (1920) 1950 (1440) 750 (550) 50
36 3200 (2360) 2450 (1810) 950 (700) 55
WDAA-01-02-001
WDAA-01-02-002 WDAA-01-02-003 WDAA-01-02-004
13. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-2
IMPORTANT: The following items are applied to both
fine and coarse pitch threads.
y
Apply lubricant to the bolts and nuts in order
to reduce friction coefficient of them. (For
example, spindle oil with white zinc B dissolved
in it)
y
Torque tolerance is ±10 %.
y
Use the bolts of correct length. The bolts that
are too long cannot be tightened as the bolt tip
comes into contact with the bottom of bolt hole.
Also the bolts that are too short cannot develop
sufficient tightening force.
y
The torque given in the chart on the previous
page are for general use only, however,
a different torque is given for a specific
application. Use the specified torque.
y
Clean the nut and bolt threads and remove dirt
or corrosion before installing.
Tightening Order
When tightening two or more bolts, tighten them
alternately, as shown, to ensure even tightening.
a
1.4
1 12
13
9
8
4
5
1
2
6
3
7
10
14
11
3
5
2
4
6
2.3
b c
a - Equally tighten upper and
lower alternately
b - Tighten diagonally c - Tighten from center
diagonally
W105-01-01-003
14. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-3
Precautions for Spilt Flange
IMPORTANT:
y
Clean the sealing surfaces. Check if there are
any scratches and roughness on the surface of
the seal that cause oil leaks and damage to the
O-ring.
y
Use only specified O-rings. Inspect O-rings for
any damage. Do not file the O-ring surfaces.
When installing O-ring into a groove, use grease
in order to hold O-ring in place.
y
While tightening the bolt by hand, check that
flange is installed to the port correctly. Do not
pinch the O-ring.
y
Tighten the bolts up and down, left and right
alternately, in order to ensure even tightening
to the specified torque.
y
Do not use air wrenches. Using an impact
wrench often causes tightening of one bolt fully
before tighten the others, resulting in damage
to O-rings or uneven tightening of bolts.
Nut and Bolt Locking
x Lock Plate
IMPORTANT: Do not reuse the lock plates. Do not try
to bend the same point twice.
x Split Pin
IMPORTANT: Do not turn in the loosening direction
in order to align the grooves and holes on the nut.
Always turn in the tightening direction. Do not
reuse the split pins.
x Wire
IMPORTANT: Attach wire to bolts in the bolt-
tightening direction. Do not reuse the wire.
Incorrect
Correct
Correct
Correct
Correct
Correct
Correct
a
a
b
d
c
Incorrect
Incorrect
Incorrect
Incorrect
a- Bend along edge sharply b- Do not bend it round
c- Tighten d- Loosen
WDAA-01-02-005
WDAA-01-02-006
W105-01-01-008
WDAA-01-02-007
WDAA-01-02-008
15. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-4
Piping Joint
IMPORTANT:
y The torque given in table below are for general
use only, however, a different torque is given for
a specific application. Use the specified torque.
y
Apply lubricant, such as the Grease Spray to
the bolts and nuts in order to reduce friction
coefficient of them.
y
Torque tolerance is ±10 %.
y
Slightly apply lubricant onto the threads first by
using the Grease Spray.
16. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-5
Union Joint
Metal sealing surfaces (4) and (5) of adapter (1) and
hose (2) fit together to seal pressure oil. Union joints
are used to join small-diameter lines.
IMPORTANT:
y
Do not over-tighten union nut (3). Excessive
force will be applied to metal sealing surfaces (4)
and (5), possibly cracking the adapter. Tighten
union nut (3) to the specifications.
y
Scratches or other damage to sealing surfaces
(4) or (5) will cause oil leakage at the joint. Take
care not to damage them when connecting /
disconnecting.
2013/09
Description Wrench Size mm Tightening Torque
Union Nut N·m (lbf·ft)
30 ° male 17 25 (18.5)
19 30 (22)
22 40 (29.5)
27 80 (59)
32 140 (103)
36 180 (133)
41 210 (155)
50 350 (260)
55 380 (280)
60 380 (280)
37 ° female 17 25 (18.5)
19 30 (22)
22 40 (29.5)
27 80 (59)
32 140 (103)
36 180 (133)
41 210 (155)
50 350 (260)
NOTE: Tightening torque of 37 ° male coupling without
union is similar to tightening torque of 37° female.
a - Joint Body
b - Male Union Joint c - Female Union Joint
1
30 °
37 °
b c
4 3 2
a
5
WDAA-01-02-009
WDAA-01-02-010
17. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-6
Pipe Joint
Pipe connection (metal joint)
(Union Nut Wrench Size: 17, 19, 22, 27)
Metal (3) of adapter (1) and pipe (2) seals pressure oil.
y Precautions for use
Do not damage sealing surfaces (4) and (5) when
disassembling and assembling.
Tightening Torque
Use the specified tightening torque in the table below.
2013/09
Wrench Size (mm) 17 19 22 27
Tightening
Torque
N·m 25 30 40 80
(lbf·ft) (18.5) (22) (29.5) (59)
O-ring Seal Joint
O-ring (6) is installed against the end surface of adapter
(7) and seals pressure oil.
IMPORTANT:
y
Replace O-ring (6) with a new one when
reinstalling.
y
Before tightening union nut (9), confirm that
O-ring (6) is seated correctly in O-ring groove
(8). Tightening union nut (9) with O-ring (6)
displaced will damage O-ring (6), resulting in oil
leakage.
y
Do not damage O-ring groove (8) of adapter (7)
or sealing surface (10) on the hose side. Damage
to O-ring (6) may cause oil leakage.
y
If union nut (9) is found to be loose, causing
oil leakage, do not tighten it to stop the leak.
Instead, replace O-ring (6) with a new one, then
tighten union nut (9) after confirming that
O-ring (6) is securely seated in O-ring groove (8).
1 4 5 3 2
7 6 9
8 10 a
a - Joint Body
2013/09
Wrench Size mm Tightening Torque
Union Nut N·m (lbf·ft)
19 30 (22)
22 70 (52)
27 95 (70)
32 140 (103)
36 180 (133)
41 210 (155)
50 350 (260)
M1M7-07-005
WDAA-01-02-011
18. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-7
Quick Coupling
1. Coupling procedure
x Push socket ring (1) into plug (3) by rotating it fully
counterclockwise and then pulling it toward you.
x Release socket ring (1). Check that socket ring (1)
is returned by the spring force and the coupling is
locked completely by ball (2). At this time, check if
socket ring (1) is returned to the original position (to
the rightmost direction).
2. Separating procedure
x Remove the hose by rotating socket ring (1) fully
counterclockwise and then pulling it. Because no
check function is attached inside, be careful that oil
flows out.
x Cap the removed hoses using special plug.
CAUTION:
y When disconnecting, do not damage joint
surface.
y When disconnecting, clean the joint part and
thoroughly wipe off the cleaning solution to
prevent any foreign material from entering.
y Complete the joint disconnecting / connecting
procedure. Check enough if oil leaks especially
after installation.
y After installation, check if socket ring (1)
is returned to the original position (to the
rightmost direction).
1
3
2
M1M7-07-006
19. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-8
Screw-In Connection
Depending on types of screw and sealing, different
types of screw-in connection are used.
IMPORTANT: Check that the thread pitch and thread
type (tapered or straight) are the correct type
before using any screw-in connection. (In general,
the screw-in connection of male tapered thread (a)
is used except for measurement purpose.)
Seal Tape Application
Seal tape is used in order to seal clearances between
male (d) and female (c) threads so that any leaks
between threads may be prevented. Therefore, apply
just enough seal tape to fill up thread clearances (e). Do
not overwrap.
x Application Procedure
Check that the thread surface is clean and, free of dirt
or damage. Apply the seal tape around threads in order
to leave one to two pitch threads uncovered. Wrap the
seal tape in the same direction as the threads.
Low-Pressure-Hose Clamp Tightening
Low-pressure-hose clamp tightening torque differs
depending on the type of clamp.
T-Bolt Type Band Clamp (g):
4.5 N·m (3.3 lbf·ft)
Worm Gear Type Band Clamp (h):
6 to 7 N·m (4.4 to 5.2 lbf·ft)
R
a
c
f
d
b
G
30 °
a - Male Tapered Thread b - Male Straight Thread
c - Internal Thread
d - External Thread
e - Clearance
f - Leave one to two pitch
threads uncovered
2013/09
Wrench Size mm Tightening Torque
Joint Body Cast iron Structural rolled
steel
19 15 (11) 35 (26)
22 30 (22) 50 (37)
27 50 (37) 95 (70)
36 70 (52) 160 (118)
41 110 (81) 200 (148)
50 160 (118) 330 (245)
60 200 (148)
NOTE: Unit: N·m (lbf·ft)
e
g - T-Bolt Type Band Clamp h - Worm Gear Type Band Clamp
g h
W105-01-01-018
W105-01-01-019
M114-07-041
M114-07-043
WDAA-01-02-012
20. Group 2 Tightening
SECTION 1 GENERAL
W1-2-1-9
Connecting Hose
CAUTION: When replacing the hoses, use only
genuine KCM/Hitachi service parts. Using hoses
other than genuine KCM/Hitachi hoses may cause
oil leaks, hose rupture or separation of fitting,
possibly resulting in a fire on the machine. Do
not install hoses kinked. Application of high oil
pressure, vibration, or an impact to a kinked hose
may result in oil leaks, hose rupture or separation
of fitting. Utilize the print marks on hoses when
installing in order to prevent hose from being
kinked. Take necessary measures to protect hoses
from rubbing against each other. If the hoses rub
against each other, wear to the hoses may result
and lead to hose rupture. Take care so that the
hoses do not come into contact with the moving
parts or sharp objects.
a
a - Rubbing Against Each Other
a - Rubbing Against Each Other b - Clamp
a - Rubbing Against Each Other b - Clamp
b b
a
a
b
Incorrect
Incorrect
Incorrect
Incorrect
Correct
Correct
Correct
Correct
W105-01-01-011
W105-01-01-012
W105-01-01-013
W105-01-01-014
21. SECTION 1 GENERAL
W1-3-1-1
Group 3 Painting
Painting
Surfaces to Be Painted Painting Color
1 Pipe High Grade Black
2 Pipe (Lift Cylinder) High Grade Black
3 Pipe High Grade Black
4 Bracket (Control Valve) High Grade Black
5 Cab (Outside) High Grade Black
6 Plate Shining Silver
7 Rear Console (Inner) High Grade Black
8 Seat Bracket High Grade Black
9 Cockpit Skirt High Grade Black
10 Cockpit High Grade Black
11 Side Console (Inner) High Grade Black
12 Cab (Inner) High Grade Black
Paint the painted surface except the above list in YR-01(TAXI Yellow).
4 1
3
2
5
12
11
10
6
7
8
9
WNEC-01-03-002
WNEC-01-03-003
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. Group 3 Painting
SECTION 1 GENERAL
W1-3-1-2
Surfaces to Be Painted Painting Color
1 Light Bracket High Grade Black
2 Hydraulic Oil Tank High Grade Black
3 Exhaust Pipe Black Heat-Resistant Painting
4 Pipe (Rain Cap) High Grade Black
5 Grill YR-01 (TAXI Yellow)
6 Cover High Grade Black
7 Bracket (Combination Light) High Grade Black
8 Rear Cover (Side) High Grade Black
9 Side Cover High Grade Black
10 Handrail High Grade Black
11 Cover (Lower) High Grade Black
12 Pipe High Grade Black
13 Pipe Guard High Grade Black
14 Articulate Lock Bar Red
Paint the painted surface except the above list in YR-01(TAXI Yellow).
1 2 3 4
5
7
8
9
10
11
12
13
14
6
WNEC-01-03-004
24. Group 3 Painting
SECTION 1 GENERAL
W1-3-1-3
Surfaces to Be Painted Painting Color
1 Handrail (Front) High Grade Black
2 Tool Box High Grade Black
3 Rear Fender High Grade Black
4 Handrail (Rear) High Grade Black
5 Fender Cover (Rear) Do not paint it.
6 Full Fender Do not paint it.
7 Bracket (Full Fender) High Grade Black
8 Bracket (Mud Guard) High Grade Black
9 Deck Plate High Grade Black
10 Step High Grade Black
11 Fender Cover (Front) Do not paint it.
Paint the painted surface except the above list in YR-01(TAXI Yellow).
2
1 3 4 5 6
7
11 10 9 8 WNEC-01-03-006
25. Group 3 Painting
SECTION 1 GENERAL
W1-3-1-4
Surfaces to Be Painted Painting Color
1 Plate High Grade Black
2 Support (Real Axle) High Grade Black
3 Rear Axle Refer to W1-3-1-5
4 Front Axle Refer to W1-3-1-6
5 Guard High Grade Black
Paint the painted surface except the above list in YR-01(TAXI Yellow).
2
1
5 4
3
WNEC-01-03-005
26. Group 3 Painting
SECTION 1 GENERAL
W1-3-1-5
Rear Axle (3)
Surfaces to Be Painted Painting Color
1 Rear Axle High Grade Black
2 Rim (Wheel) Mounting Part Do not paint it.
3 End of Axle and Rim (Wheel) YR-01(TAXI Yellow)
4 Boss Part Do not paint it.
5 Boss Part Do not paint it.
6 Guard Mounting Part (Thread Part ) Do not paint it.
7 Flange Part Do not paint it.
8 Name Plate Do not paint it.
9 End of Boss Part Do not paint it.
10 Guard Mounting Part (Thread Part ) Do not paint it.
WNEC-01-03-007
WNEC-01-03-008
WNEC-01-03-009
WNEC-01-03-010
View A View C
View B
8 10
9
B
4
5
6
C
A
7
1 2 3 2